This is the result of grepping/searching for several common whitespace issues like double empty lines, leading spaces, etc. This patch fixes them for the ath79 target. Signed-off-by: Adrian Schmutzler <[email protected]>
@@ -117,7 +117,6 @@
};
-
&usb1 {
#address-cells = <1>;
#size-cells = <0>;
@@ -219,7 +218,6 @@
ð0 {
status = "okay";
pll-data = <0x11110000 0x00001099 0x00991099>;
@@ -33,4 +33,3 @@
read-only;
@@ -7,4 +7,3 @@
model = "Netgear WNR612 v2";
compatible = "netgear,wnr612-v2", "qca,ar7240";
model = "ON Network N150R";
compatible = "on,n150r", "qca,ar7240";
@@ -154,7 +154,6 @@
@@ -43,7 +43,6 @@
regulator-max-microvolt = <5000000>;
enable-active-high;
&spi {
@@ -47,7 +47,6 @@
gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
@@ -76,4 +76,3 @@
pinctrl-single,bits = <0x8 0x0 0xff000000>;
@@ -44,4 +44,3 @@
@@ -148,4 +148,3 @@
qca,no-eeprom;
@@ -176,7 +176,6 @@
phy-mode = "rgmii";
phy-handle = <&phy0>;
aliases {
ag0 = ð1;
@@ -63,7 +63,6 @@
label = "zbt-wd323:orange:lan2";
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
@@ -23,4 +23,4 @@
&led_wlan {
label = "gl-ar300m-lite:green:wlan";
-};
+};
@@ -53,7 +53,6 @@
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
i2c {
@@ -62,8 +61,6 @@
sda-gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
scl-gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
&pcie0 {
@@ -31,7 +31,7 @@
label = "tp-link:white:wlan5g";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
- };
+ };
qss_led: qss {
label = "tp-link:white:qss";
@@ -166,4 +166,3 @@
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&uboot 0x1fc00>;
@@ -212,9 +212,7 @@
&cpuintc {
@@ -237,7 +235,6 @@
phy-mode = "mii";
&mdio1 {
resets = <&rst 23>;
@@ -35,7 +35,6 @@
@@ -54,7 +54,6 @@
gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
gpio_export {
compatible = "gpio-export";
@@ -109,7 +109,6 @@
reg = <0xff0000 0x010000>;
@@ -40,7 +40,6 @@
label = "librerouter-v1:blue:status";
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
button {
@@ -52,7 +51,6 @@
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
watchdog {
@@ -62,7 +60,6 @@
hw_margin_ms = <1000>;
always-running;
@@ -187,7 +184,6 @@
mtd-mac-address = <&art 0x0>;
ð1 {
@@ -28,9 +28,7 @@
&pcie1 {
@@ -79,7 +79,6 @@
gpio-export,output = <1>;
gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
@@ -62,7 +62,6 @@
@@ -166,7 +165,6 @@
@@ -209,7 +207,6 @@
&wmac {
@@ -118,7 +118,6 @@
gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
@@ -146,7 +146,6 @@
&pcie {
@@ -29,7 +29,6 @@
label = "ubnt:blue:dome";
gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
keys {