|
|
@@ -1,1124 +0,0 @@
|
|
|
-/*
|
|
|
- * This file is subject to the terms and conditions of the GNU General Public
|
|
|
- * License. See the file "COPYING" in the main directory of this archive
|
|
|
- * for more details.
|
|
|
- *
|
|
|
- * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved.
|
|
|
- */
|
|
|
-
|
|
|
-#ifndef AR531X_H
|
|
|
-#define AR531X_H 1
|
|
|
-
|
|
|
-
|
|
|
-#ifndef CONFIG_AR531X_COBRA
|
|
|
-
|
|
|
-#include <asm/addrspace.h>
|
|
|
-
|
|
|
-/* Address Map */
|
|
|
-#define AR531X_WLAN0 0x18000000
|
|
|
-#define AR531X_WLAN1 0x18500000
|
|
|
-#define AR531X_ENET0 0x18100000
|
|
|
-#define AR531X_ENET1 0x18200000
|
|
|
-#define AR531X_SDRAMCTL 0x18300000
|
|
|
-#define AR531X_FLASHCTL 0x18400000
|
|
|
-#define AR531X_APBBASE 0x1c000000
|
|
|
-#define AR531X_FLASH 0x1e000000
|
|
|
-
|
|
|
-/*
|
|
|
- * AR531X_NUM_ENET_MAC defines the number of ethernet MACs that
|
|
|
- * should be considered available. The AR5312 supports 2 enet MACS,
|
|
|
- * even though many reference boards only actually use 1 of them
|
|
|
- * (i.e. Only MAC 0 is actually connected to an enet PHY or PHY switch.
|
|
|
- * The AR2312 supports 1 enet MAC.
|
|
|
- */
|
|
|
-#define AR531X_NUM_ENET_MAC 2
|
|
|
-
|
|
|
-/*
|
|
|
- * Need these defines to determine true number of ethernet MACs
|
|
|
- */
|
|
|
-#define AR5212_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */
|
|
|
-#define AR5212_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */
|
|
|
-#define AR5212_AR2313_REV8 0x0058 /* AR2313 WMAC (AP43-030) */
|
|
|
-#define AR531X_RADIO_MASK_OFF 0xc8
|
|
|
-#define AR531X_RADIO0_MASK 0x0003
|
|
|
-#define AR531X_RADIO1_MASK 0x000c
|
|
|
-#define AR531X_RADIO1_S 2
|
|
|
-
|
|
|
-/*
|
|
|
- * AR531X_NUM_WMAC defines the number of Wireless MACs that\
|
|
|
- * should be considered available.
|
|
|
- */
|
|
|
-#define AR531X_NUM_WMAC 2
|
|
|
-
|
|
|
-/* Reset/Timer Block Address Map */
|
|
|
-#define AR531X_RESETTMR (AR531X_APBBASE + 0x3000)
|
|
|
-#define AR531X_TIMER (AR531X_RESETTMR + 0x0000) /* countdown timer */
|
|
|
-#define AR531X_WD_CTRL (AR531X_RESETTMR + 0x0008) /* watchdog cntrl */
|
|
|
-#define AR531X_WD_TIMER (AR531X_RESETTMR + 0x000c) /* watchdog timer */
|
|
|
-#define AR531X_ISR (AR531X_RESETTMR + 0x0010) /* Intr Status Reg */
|
|
|
-#define AR531X_IMR (AR531X_RESETTMR + 0x0014) /* Intr Mask Reg */
|
|
|
-#define AR531X_RESET (AR531X_RESETTMR + 0x0020)
|
|
|
-#define AR5312_CLOCKCTL1 (AR531X_RESETTMR + 0x0064)
|
|
|
-#define AR5312_SCRATCH (AR531X_RESETTMR + 0x006c)
|
|
|
-#define AR531X_PROCADDR (AR531X_RESETTMR + 0x0070)
|
|
|
-#define AR531X_PROC1 (AR531X_RESETTMR + 0x0074)
|
|
|
-#define AR531X_DMAADDR (AR531X_RESETTMR + 0x0078)
|
|
|
-#define AR531X_DMA1 (AR531X_RESETTMR + 0x007c)
|
|
|
-#define AR531X_ENABLE (AR531X_RESETTMR + 0x0080) /* interface enb */
|
|
|
-#define AR531X_REV (AR531X_RESETTMR + 0x0090) /* revision */
|
|
|
-
|
|
|
-/* AR531X_WD_CTRL register bit field definitions */
|
|
|
-#define AR531X_WD_CTRL_IGNORE_EXPIRATION 0x0000
|
|
|
-#define AR531X_WD_CTRL_NMI 0x0001
|
|
|
-#define AR531X_WD_CTRL_RESET 0x0002
|
|
|
-
|
|
|
-/* AR531X_ISR register bit field definitions */
|
|
|
-#define AR531X_ISR_NONE 0x0000
|
|
|
-#define AR531X_ISR_TIMER 0x0001
|
|
|
-#define AR531X_ISR_AHBPROC 0x0002
|
|
|
-#define AR531X_ISR_AHBDMA 0x0004
|
|
|
-#define AR531X_ISR_GPIO 0x0008
|
|
|
-#define AR531X_ISR_UART0 0x0010
|
|
|
-#define AR531X_ISR_UART0DMA 0x0020
|
|
|
-#define AR531X_ISR_WD 0x0040
|
|
|
-#define AR531X_ISR_LOCAL 0x0080
|
|
|
-
|
|
|
-/* AR531X_RESET register bit field definitions */
|
|
|
-#define AR531X_RESET_SYSTEM 0x00000001 /* cold reset full system */
|
|
|
-#define AR531X_RESET_PROC 0x00000002 /* cold reset MIPS core */
|
|
|
-#define AR531X_RESET_WLAN0 0x00000004 /* cold reset WLAN MAC and BB */
|
|
|
-#define AR531X_RESET_EPHY0 0x00000008 /* cold reset ENET0 phy */
|
|
|
-#define AR531X_RESET_EPHY1 0x00000010 /* cold reset ENET1 phy */
|
|
|
-#define AR531X_RESET_ENET0 0x00000020 /* cold reset ENET0 mac */
|
|
|
-#define AR531X_RESET_ENET1 0x00000040 /* cold reset ENET1 mac */
|
|
|
-#define AR531X_RESET_UART0 0x00000100 /* cold reset UART0 (high speed) */
|
|
|
-#define AR531X_RESET_WLAN1 0x00000200 /* cold reset WLAN MAC/BB */
|
|
|
-#define AR531X_RESET_APB 0x00000400 /* cold reset APB (ar5312) */
|
|
|
-#define AR531X_RESET_WARM_PROC 0x00001000 /* warm reset MIPS core */
|
|
|
-#define AR531X_RESET_WARM_WLAN0_MAC 0x00002000 /* warm reset WLAN0 MAC */
|
|
|
-#define AR531X_RESET_WARM_WLAN0_BB 0x00004000 /* warm reset WLAN0 BaseBand */
|
|
|
-#define AR531X_RESET_NMI 0x00010000 /* send an NMI to the processor */
|
|
|
-#define AR531X_RESET_WARM_WLAN1_MAC 0x00020000 /* warm reset WLAN1 mac */
|
|
|
-#define AR531X_RESET_WARM_WLAN1_BB 0x00040000 /* warm reset WLAN1 baseband */
|
|
|
-#define AR531X_RESET_LOCAL_BUS 0x00080000 /* reset local bus */
|
|
|
-#define AR531X_RESET_WDOG 0x00100000 /* last reset was a watchdog */
|
|
|
-
|
|
|
-#define AR531X_RESET_WMAC0_BITS \
|
|
|
- AR531X_RESET_WLAN0 |\
|
|
|
- AR531X_RESET_WARM_WLAN0_MAC |\
|
|
|
- AR531X_RESET_WARM_WLAN0_BB
|
|
|
-
|
|
|
-#define AR531X_RESERT_WMAC1_BITS \
|
|
|
- AR531X_RESET_WLAN1 |\
|
|
|
- AR531X_RESET_WARM_WLAN1_MAC |\
|
|
|
- AR531X_RESET_WARM_WLAN1_BB
|
|
|
-
|
|
|
-/* AR5312_CLOCKCTL1 register bit field definitions */
|
|
|
-#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030
|
|
|
-#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4
|
|
|
-#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00
|
|
|
-#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8
|
|
|
-#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000
|
|
|
-
|
|
|
-/* Valid for AR5312 and AR2312 */
|
|
|
-#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030
|
|
|
-#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4
|
|
|
-#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00
|
|
|
-#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8
|
|
|
-#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000
|
|
|
-
|
|
|
-/* Valid for AR2313 */
|
|
|
-#define AR2313_CLOCKCTL1_PREDIVIDE_MASK 0x00003000
|
|
|
-#define AR2313_CLOCKCTL1_PREDIVIDE_SHIFT 12
|
|
|
-#define AR2313_CLOCKCTL1_MULTIPLIER_MASK 0x001f0000
|
|
|
-#define AR2313_CLOCKCTL1_MULTIPLIER_SHIFT 16
|
|
|
-#define AR2313_CLOCKCTL1_DOUBLER_MASK 0x00000000
|
|
|
-
|
|
|
-
|
|
|
-/* AR531X_ENABLE register bit field definitions */
|
|
|
-#define AR531X_ENABLE_WLAN0 0x0001
|
|
|
-#define AR531X_ENABLE_ENET0 0x0002
|
|
|
-#define AR531X_ENABLE_ENET1 0x0004
|
|
|
-#define AR531X_ENABLE_UART_AND_WLAN1_PIO 0x0008 /* UART, and WLAN1 PIOs */
|
|
|
-#define AR531X_ENABLE_WLAN1_DMA 0x0010 /* WLAN1 DMAs */
|
|
|
-#define AR531X_ENABLE_WLAN1 \
|
|
|
- (AR531X_ENABLE_UART_AND_WLAN1_PIO | AR531X_ENABLE_WLAN1_DMA)
|
|
|
-
|
|
|
-/* AR531X_REV register bit field definitions */
|
|
|
-#define AR531X_REV_WMAC_MAJ 0xf000
|
|
|
-#define AR531X_REV_WMAC_MAJ_S 12
|
|
|
-#define AR531X_REV_WMAC_MIN 0x0f00
|
|
|
-#define AR531X_REV_WMAC_MIN_S 8
|
|
|
-#define AR531X_REV_MAJ 0x00f0
|
|
|
-#define AR531X_REV_MAJ_S 4
|
|
|
-#define AR531X_REV_MIN 0x000f
|
|
|
-#define AR531X_REV_MIN_S 0
|
|
|
-#define AR531X_REV_CHIP (REV_MAJ|REV_MIN)
|
|
|
-
|
|
|
-/* Major revision numbers, bits 7..4 of Revision ID register */
|
|
|
-#define AR531X_REV_MAJ_AR5312 0x4
|
|
|
-#define AR531X_REV_MAJ_AR2313 0x5
|
|
|
-
|
|
|
-/* Minor revision numbers, bits 3..0 of Revision ID register */
|
|
|
-#define AR5312_REV_MIN_DUAL 0x0 /* Dual WLAN version */
|
|
|
-#define AR5312_REV_MIN_SINGLE 0x1 /* Single WLAN version */
|
|
|
-
|
|
|
-/* AR531X_FLASHCTL register bit field definitions */
|
|
|
-#define FLASHCTL_IDCY 0x0000000f /* Idle cycle turn around time */
|
|
|
-#define FLASHCTL_IDCY_S 0
|
|
|
-#define FLASHCTL_WST1 0x000003e0 /* Wait state 1 */
|
|
|
-#define FLASHCTL_WST1_S 5
|
|
|
-#define FLASHCTL_RBLE 0x00000400 /* Read byte lane enable */
|
|
|
-#define FLASHCTL_WST2 0x0000f800 /* Wait state 2 */
|
|
|
-#define FLASHCTL_WST2_S 11
|
|
|
-#define FLASHCTL_AC 0x00070000 /* Flash address check (added) */
|
|
|
-#define FLASHCTL_AC_S 16
|
|
|
-#define FLASHCTL_AC_128K 0x00000000
|
|
|
-#define FLASHCTL_AC_256K 0x00010000
|
|
|
-#define FLASHCTL_AC_512K 0x00020000
|
|
|
-#define FLASHCTL_AC_1M 0x00030000
|
|
|
-#define FLASHCTL_AC_2M 0x00040000
|
|
|
-#define FLASHCTL_AC_4M 0x00050000
|
|
|
-#define FLASHCTL_AC_8M 0x00060000
|
|
|
-#define FLASHCTL_AC_RES 0x00070000 /* 16MB is not supported */
|
|
|
-#define FLASHCTL_E 0x00080000 /* Flash bank enable (added) */
|
|
|
-#define FLASHCTL_BUSERR 0x01000000 /* Bus transfer error status flag */
|
|
|
-#define FLASHCTL_WPERR 0x02000000 /* Write protect error status flag */
|
|
|
-#define FLASHCTL_WP 0x04000000 /* Write protect */
|
|
|
-#define FLASHCTL_BM 0x08000000 /* Burst mode */
|
|
|
-#define FLASHCTL_MW 0x30000000 /* Memory width */
|
|
|
-#define FLASHCTL_MWx8 0x00000000 /* Memory width x8 */
|
|
|
-#define FLASHCTL_MWx16 0x10000000 /* Memory width x16 */
|
|
|
-#define FLASHCTL_MWx32 0x20000000 /* Memory width x32 (not supported) */
|
|
|
-#define FLASHCTL_ATNR 0x00000000 /* Access type == no retry */
|
|
|
-#define FLASHCTL_ATR 0x80000000 /* Access type == retry every */
|
|
|
-#define FLASHCTL_ATR4 0xc0000000 /* Access type == retry every 4 */
|
|
|
-
|
|
|
-/* ARM Flash Controller -- 3 flash banks with either x8 or x16 devices. */
|
|
|
-#define AR531X_FLASHCTL0 (AR531X_FLASHCTL + 0x00)
|
|
|
-#define AR531X_FLASHCTL1 (AR531X_FLASHCTL + 0x04)
|
|
|
-#define AR531X_FLASHCTL2 (AR531X_FLASHCTL + 0x08)
|
|
|
-
|
|
|
-/* ARM SDRAM Controller -- just enough to determine memory size */
|
|
|
-#define AR531X_MEM_CFG1 (AR531X_SDRAMCTL + 0x04)
|
|
|
-#define MEM_CFG1_AC0 0x00000700 /* bank 0: SDRAM addr check (added) */
|
|
|
-#define MEM_CFG1_AC0_S 8
|
|
|
-#define MEM_CFG1_AC1 0x00007000 /* bank 1: SDRAM addr check (added) */
|
|
|
-#define MEM_CFG1_AC1_S 12
|
|
|
-
|
|
|
-/* GPIO Address Map */
|
|
|
-#define AR531X_GPIO (AR531X_APBBASE + 0x2000)
|
|
|
-#define AR531X_GPIO_DO (AR531X_GPIO + 0x00) /* output register */
|
|
|
-#define AR531X_GPIO_DI (AR531X_GPIO + 0x04) /* intput register */
|
|
|
-#define AR531X_GPIO_CR (AR531X_GPIO + 0x08) /* control register */
|
|
|
-
|
|
|
-/* GPIO Control Register bit field definitions */
|
|
|
-#define GPIO_CR_M(x) (1 << (x)) /* mask for i/o */
|
|
|
-#define GPIO_CR_O(x) (0 << (x)) /* mask for output */
|
|
|
-#define GPIO_CR_I(x) (1 << (x)) /* mask for input */
|
|
|
-#define GPIO_CR_INT(x) (1 << ((x)+8)) /* mask for interrupt */
|
|
|
-#define GPIO_CR_UART(x) (1 << ((x)+16)) /* uart multiplex */
|
|
|
-
|
|
|
-
|
|
|
-typedef unsigned int AR531X_REG;
|
|
|
-
|
|
|
-#define sysRegRead(phys) \
|
|
|
- (*(volatile AR531X_REG *)PHYS_TO_K1(phys))
|
|
|
-
|
|
|
-#define sysRegWrite(phys, val) \
|
|
|
- ((*(volatile AR531X_REG *)PHYS_TO_K1(phys)) = (val))
|
|
|
-
|
|
|
-
|
|
|
-/*
|
|
|
- * This is board-specific data that is stored in a "fixed" location in flash.
|
|
|
- * It is shared across operating systems, so it should not be changed lightly.
|
|
|
- * The main reason we need it is in order to extract the ethernet MAC
|
|
|
- * address(es).
|
|
|
- */
|
|
|
-struct ar531x_boarddata {
|
|
|
- u32 magic; /* board data is valid */
|
|
|
-#define AR531X_BD_MAGIC 0x35333131 /* "5311", for all 531x platforms */
|
|
|
- u16 cksum; /* checksum (starting with BD_REV 2) */
|
|
|
- u16 rev; /* revision of this struct */
|
|
|
-#define BD_REV 4
|
|
|
- char boardName[64]; /* Name of board */
|
|
|
- u16 major; /* Board major number */
|
|
|
- u16 minor; /* Board minor number */
|
|
|
- u32 config; /* Board configuration */
|
|
|
-#define BD_ENET0 0x00000001 /* ENET0 is stuffed */
|
|
|
-#define BD_ENET1 0x00000002 /* ENET1 is stuffed */
|
|
|
-#define BD_UART1 0x00000004 /* UART1 is stuffed */
|
|
|
-#define BD_UART0 0x00000008 /* UART0 is stuffed (dma) */
|
|
|
-#define BD_RSTFACTORY 0x00000010 /* Reset factory defaults stuffed */
|
|
|
-#define BD_SYSLED 0x00000020 /* System LED stuffed */
|
|
|
-#define BD_EXTUARTCLK 0x00000040 /* External UART clock */
|
|
|
-#define BD_CPUFREQ 0x00000080 /* cpu freq is valid in nvram */
|
|
|
-#define BD_SYSFREQ 0x00000100 /* sys freq is set in nvram */
|
|
|
-#define BD_WLAN0 0x00000200 /* Enable WLAN0 */
|
|
|
-#define BD_MEMCAP 0x00000400 /* CAP SDRAM @ memCap for testing */
|
|
|
-#define BD_DISWATCHDOG 0x00000800 /* disable system watchdog */
|
|
|
-#define BD_WLAN1 0x00001000 /* Enable WLAN1 (ar5212) */
|
|
|
-#define BD_ISCASPER 0x00002000 /* FLAG for AR2312 */
|
|
|
-#define BD_WLAN0_2G_EN 0x00004000 /* FLAG for radio0_2G */
|
|
|
-#define BD_WLAN0_5G_EN 0x00008000 /* FLAG for radio0_2G */
|
|
|
-#define BD_WLAN1_2G_EN 0x00020000 /* FLAG for radio0_2G */
|
|
|
-#define BD_WLAN1_5G_EN 0x00040000 /* FLAG for radio0_2G */
|
|
|
- u16 resetConfigGpio; /* Reset factory GPIO pin */
|
|
|
- u16 sysLedGpio; /* System LED GPIO pin */
|
|
|
-
|
|
|
- u32 cpuFreq; /* CPU core frequency in Hz */
|
|
|
- u32 sysFreq; /* System frequency in Hz */
|
|
|
- u32 cntFreq; /* Calculated C0_COUNT frequency */
|
|
|
-
|
|
|
- u8 wlan0Mac[6];
|
|
|
- u8 enet0Mac[6];
|
|
|
- u8 enet1Mac[6];
|
|
|
-
|
|
|
- u16 pciId; /* Pseudo PCIID for common code */
|
|
|
- u16 memCap; /* cap bank1 in MB */
|
|
|
-
|
|
|
- /* version 3 */
|
|
|
- u8 wlan1Mac[6]; /* (ar5212) */
|
|
|
-};
|
|
|
-
|
|
|
-#else
|
|
|
-
|
|
|
-/*
|
|
|
- * Add support for Cobra
|
|
|
- *
|
|
|
- * AR531XPLUSreg.h Register definitions for Atheros AR5311 and AR5312 chipsets.
|
|
|
- * - WLAN registers are listed in
|
|
|
- * hal/ar5211/ar5211Reg.h
|
|
|
- * hal/ar5212/ar5212Reg.h
|
|
|
- * - Ethernet registers are listed in ar531xenet.h
|
|
|
- * - Standard UART is 16550 compatible.
|
|
|
- */
|
|
|
-
|
|
|
-
|
|
|
-/*
|
|
|
- * Address map
|
|
|
- */
|
|
|
-#define AR531XPLUS_SDRAM0 0x00000000 /* DRAM */
|
|
|
-#define AR531XPLUS_SPI_READ 0x08000000 /* SPI FLASH */
|
|
|
-#define AR531XPLUS_WLAN0 0xB0000000 /* Wireless MMR */
|
|
|
-#define AR531XPLUS_PCI 0xB0100000 /* PCI MMR */
|
|
|
-#define AR531XPLUS_SDRAMCTL 0xB0300000 /* SDRAM MMR */
|
|
|
-#define AR531XPLUS_LOCAL 0xB0400000 /* LOCAL BUS MMR */
|
|
|
-#define AR531XPLUS_ENET0 0xB0500000 /* ETHERNET MMR */
|
|
|
-#define AR531XPLUS_DSLBASE 0xB1000000 /* RESET CONTROL MMR */
|
|
|
-#define AR531XPLUS_UART0 0xB1100003 /* UART MMR */
|
|
|
-#define AR531XPLUS_SPI 0xB1300000 /* SPI FLASH MMR */
|
|
|
-#define AR531XPLUS_FLASHBT 0xBfc00000 /* ro boot alias to FLASH */
|
|
|
-#define AR531XPLUS_RAM1 0x40000000 /* ram alias */
|
|
|
-#define AR531XPLUS_PCIEXT 0x80000000 /* pci external */
|
|
|
-#define AR531XPLUS_RAM2 0xc0000000 /* ram alias */
|
|
|
-#define AR531XPLUS_RAM3 0xe0000000 /* ram alias */
|
|
|
-
|
|
|
-#define AR531X_ENET0 AR531XPLUS_ENET0
|
|
|
-#define AR531X_ENET1 0
|
|
|
-/*
|
|
|
- * Reset Register
|
|
|
- */
|
|
|
-#define AR531XPLUS_COLD_RESET (AR531XPLUS_DSLBASE + 0x0000)
|
|
|
-
|
|
|
-/* Cold Reset */
|
|
|
-#define RESET_COLD_AHB 0x00000001
|
|
|
-#define RESET_COLD_APB 0x00000002
|
|
|
-#define RESET_COLD_CPU 0x00000004
|
|
|
-#define RESET_COLD_CPUWARM 0x00000008
|
|
|
-#define RESET_SYSTEM (RESET_COLD_CPU | RESET_COLD_APB | RESET_COLD_AHB) /* full system */
|
|
|
-
|
|
|
-/* Warm Reset */
|
|
|
-
|
|
|
-#define AR531XPLUS_RESET (AR531XPLUS_DSLBASE + 0x0004)
|
|
|
-#define AR531X_RESET AR531XPLUS_RESET
|
|
|
-
|
|
|
-#define RESET_WARM_WLAN0_MAC 0x00000001 /* warm reset WLAN0 MAC */
|
|
|
-#define RESET_WARM_WLAN0_BB 0x00000002 /* warm reset WLAN0 BaseBand */
|
|
|
-#define RESET_MPEGTS_RSVD 0x00000004 /* warm reset MPEG-TS */
|
|
|
-#define RESET_PCIDMA 0x00000008 /* warm reset PCI ahb/dma */
|
|
|
-#define RESET_MEMCTL 0x00000010 /* warm reset memory controller */
|
|
|
-#define RESET_LOCAL 0x00000020 /* warm reset local bus */
|
|
|
-#define RESET_I2C_RSVD 0x00000040 /* warm reset I2C bus */
|
|
|
-#define RESET_SPI 0x00000080 /* warm reset SPI interface */
|
|
|
-#define RESET_UART0 0x00000100 /* warm reset UART0 */
|
|
|
-#define RESET_IR_RSVD 0x00000200 /* warm reset IR interface */
|
|
|
-#define RESET_EPHY0 0x00000400 /* cold reset ENET0 phy */
|
|
|
-#define RESET_ENET0 0x00000800 /* cold reset ENET0 mac */
|
|
|
-
|
|
|
-#define AR531X_RESET_ENET0 RESET_ENET0
|
|
|
-#define AR531X_RESET_EPHY0 RESET_EPHY0
|
|
|
-#define AR531X_RESET_ENET1 0
|
|
|
-#define AR531X_RESET_EPHY1 0
|
|
|
-
|
|
|
-/*
|
|
|
- * AHB master arbitration control
|
|
|
- */
|
|
|
-#define AR531XPLUS_AHB_ARB_CTL (AR531XPLUS_DSLBASE + 0x0008)
|
|
|
-
|
|
|
-#define ARB_CPU 0x00000001 /* CPU, default */
|
|
|
-#define ARB_WLAN 0x00000002 /* WLAN */
|
|
|
-#define ARB_MPEGTS_RSVD 0x00000004 /* MPEG-TS */
|
|
|
-#define ARB_LOCAL 0x00000008 /* LOCAL */
|
|
|
-#define ARB_PCI 0x00000010 /* PCI */
|
|
|
-#define ARB_ETHERNET 0x00000020 /* Ethernet */
|
|
|
-#define ARB_RETRY 0x00000100 /* retry policy, debug only */
|
|
|
-
|
|
|
-/*
|
|
|
- * Config Register
|
|
|
- */
|
|
|
-#define AR531XPLUS_ENDIAN_CTL (AR531XPLUS_DSLBASE + 0x000c)
|
|
|
-
|
|
|
-#define CONFIG_AHB 0x00000001 /* EC - AHB bridge endianess */
|
|
|
-#define CONFIG_WLAN 0x00000002 /* WLAN byteswap */
|
|
|
-#define CONFIG_MPEGTS_RSVD 0x00000004 /* MPEG-TS byteswap */
|
|
|
-#define CONFIG_PCI 0x00000008 /* PCI byteswap */
|
|
|
-#define CONFIG_MEMCTL 0x00000010 /* Memory controller endianess */
|
|
|
-#define CONFIG_LOCAL 0x00000020 /* Local bus byteswap */
|
|
|
-#define CONFIG_ETHERNET 0x00000040 /* Ethernet byteswap */
|
|
|
-
|
|
|
-#define CONFIG_MERGE 0x00000200 /* CPU write buffer merge */
|
|
|
-#define CONFIG_CPU 0x00000400 /* CPU big endian */
|
|
|
-#define CONFIG_PCIAHB 0x00000800
|
|
|
-#define CONFIG_PCIAHB_BRIDGE 0x00001000
|
|
|
-#define CONFIG_SPI 0x00008000 /* SPI byteswap */
|
|
|
-#define CONFIG_CPU_DRAM 0x00010000
|
|
|
-#define CONFIG_CPU_PCI 0x00020000
|
|
|
-#define CONFIG_CPU_MMR 0x00040000
|
|
|
-#define CONFIG_BIG 0x00000400
|
|
|
-
|
|
|
-
|
|
|
-/*
|
|
|
- * NMI control
|
|
|
- */
|
|
|
-#define AR531XPLUS_NMI_CTL (AR531XPLUS_DSLBASE + 0x0010)
|
|
|
-
|
|
|
-#define NMI_EN 1
|
|
|
-
|
|
|
-/*
|
|
|
- * Revision Register - Initial value is 0x3010 (WMAC 3.0, AR531X 1.0).
|
|
|
- */
|
|
|
-#define AR531XPLUS_SREV (AR531XPLUS_DSLBASE + 0x0014)
|
|
|
-
|
|
|
-#define AR531X_REV AR531XPLUS_SREV
|
|
|
-
|
|
|
-#define REV_MAJ 0x00f0
|
|
|
-#define REV_MAJ_S 4
|
|
|
-#define REV_MIN 0x000f
|
|
|
-#define REV_MIN_S 0
|
|
|
-#define REV_CHIP (REV_MAJ|REV_MIN)
|
|
|
-
|
|
|
-#define AR531X_REV_MAJ REV_MAJ
|
|
|
-#define AR531X_REV_MAJ_S REV_MAJ_S
|
|
|
-#define AR531X_REV_MIN REV_MIN
|
|
|
-#define AR531X_REV_MIN_S REV_MIN_S
|
|
|
-#define REV_CHIP (REV_MAJ|REV_MIN)
|
|
|
-/*
|
|
|
- * Need these defines to determine true number of ethernet MACs
|
|
|
- */
|
|
|
-#define AR5212_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */
|
|
|
-#define AR5212_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */
|
|
|
-#define AR5212_AR2313_REV8 0x0058 /* AR2313 WMAC (AP43-030) */
|
|
|
-#define AR531X_RADIO_MASK_OFF 0xc8
|
|
|
-#define AR531X_RADIO0_MASK 0x0003
|
|
|
-#define AR531X_RADIO1_MASK 0x000c
|
|
|
-#define AR531X_RADIO1_S 2
|
|
|
-
|
|
|
-/* Major revision numbers, bits 7..4 of Revision ID register */
|
|
|
-#define AR531X_REV_MAJ_AR5312 0x4
|
|
|
-#define AR531X_REV_MAJ_AR2313 0x5
|
|
|
-
|
|
|
-/*
|
|
|
- * AR531X_NUM_ENET_MAC defines the number of ethernet MACs that
|
|
|
- * should be considered available. The AR5312 supports 2 enet MACS,
|
|
|
- * even though many reference boards only actually use 1 of them
|
|
|
- * (i.e. Only MAC 0 is actually connected to an enet PHY or PHY switch.
|
|
|
- * The AR2312 supports 1 enet MAC.
|
|
|
- */
|
|
|
-#define AR531X_NUM_ENET_MAC 1
|
|
|
-
|
|
|
-/*
|
|
|
- * Interface Enable
|
|
|
- */
|
|
|
-#define AR531XPLUS_IF_CTL (AR531XPLUS_DSLBASE + 0x0018)
|
|
|
-
|
|
|
-#define IF_MASK 0x00000007
|
|
|
-#define IF_DISABLED 0
|
|
|
-#define IF_PCI 1
|
|
|
-#define IF_TS_LOCAL 2
|
|
|
-#define IF_ALL 3 /* only for emulation with separate pins */
|
|
|
-#define IF_LOCAL_HOST 0x00000008
|
|
|
-#define IF_PCI_HOST 0x00000010
|
|
|
-#define IF_PCI_INTR 0x00000020
|
|
|
-#define IF_PCI_CLK_MASK 0x00030000
|
|
|
-#define IF_PCI_CLK_INPUT 0
|
|
|
-#define IF_PCI_CLK_OUTPUT_LOW 1
|
|
|
-#define IF_PCI_CLK_OUTPUT_CLK 2
|
|
|
-#define IF_PCI_CLK_OUTPUT_HIGH 3
|
|
|
-#define IF_PCI_CLK_SHIFT 16
|
|
|
-
|
|
|
-
|
|
|
-/* Major revision numbers, bits 7..4 of Revision ID register */
|
|
|
-#define REV_MAJ_AR5311 0x01
|
|
|
-#define REV_MAJ_AR5312 0x04
|
|
|
-#define REV_MAJ_AR5315 0x0B
|
|
|
-
|
|
|
-/*
|
|
|
- * APB Interrupt control
|
|
|
- */
|
|
|
-
|
|
|
-#define AR531XPLUS_ISR (AR531XPLUS_DSLBASE + 0x0020)
|
|
|
-#define AR531XPLUS_IMR (AR531XPLUS_DSLBASE + 0x0024)
|
|
|
-#define AR531XPLUS_GISR (AR531XPLUS_DSLBASE + 0x0028)
|
|
|
-
|
|
|
-#define ISR_UART0 0x0001 /* high speed UART */
|
|
|
-#define ISR_I2C_RSVD 0x0002 /* I2C bus */
|
|
|
-#define ISR_SPI 0x0004 /* SPI bus */
|
|
|
-#define ISR_AHB 0x0008 /* AHB error */
|
|
|
-#define ISR_APB 0x0010 /* APB error */
|
|
|
-#define ISR_TIMER 0x0020 /* timer */
|
|
|
-#define ISR_GPIO 0x0040 /* GPIO */
|
|
|
-#define ISR_WD 0x0080 /* watchdog */
|
|
|
-#define ISR_IR_RSVD 0x0100 /* IR */
|
|
|
-
|
|
|
-#define IMR_UART0 ISR_UART0
|
|
|
-#define IMR_I2C_RSVD ISR_I2C_RSVD
|
|
|
-#define IMR_SPI ISR_SPI
|
|
|
-#define IMR_AHB ISR_AHB
|
|
|
-#define IMR_APB ISR_APB
|
|
|
-#define IMR_TIMER ISR_TIMER
|
|
|
-#define IMR_GPIO ISR_GPIO
|
|
|
-#define IMR_WD ISR_WD
|
|
|
-#define IMR_IR_RSVD ISR_IR_RSVD
|
|
|
-
|
|
|
-#define GISR_MISC 0x0001
|
|
|
-#define GISR_WLAN0 0x0002
|
|
|
-#define GISR_MPEGTS_RSVD 0x0004
|
|
|
-#define GISR_LOCALPCI 0x0008
|
|
|
-#define GISR_WMACPOLL 0x0010
|
|
|
-#define GISR_TIMER 0x0020
|
|
|
-#define GISR_ETHERNET 0x0040
|
|
|
-
|
|
|
-/*
|
|
|
- * Interrupt routing from IO to the processor IP bits
|
|
|
- * Define our inter mask and level
|
|
|
- */
|
|
|
-#define AR531XPLUS_INTR_MISCIO SR_IBIT3
|
|
|
-#define AR531XPLUS_INTR_WLAN0 SR_IBIT4
|
|
|
-#define AR531XPLUS_INTR_ENET0 SR_IBIT5
|
|
|
-#define AR531XPLUS_INTR_LOCALPCI SR_IBIT6
|
|
|
-#define AR531XPLUS_INTR_WMACPOLL SR_IBIT7
|
|
|
-#define AR531XPLUS_INTR_COMPARE SR_IBIT8
|
|
|
-
|
|
|
-/*
|
|
|
- * Timers
|
|
|
- */
|
|
|
-#define AR531XPLUS_TIMER (AR531XPLUS_DSLBASE + 0x0030)
|
|
|
-#define AR531XPLUS_RELOAD (AR531XPLUS_DSLBASE + 0x0034)
|
|
|
-#define AR531XPLUS_WD (AR531XPLUS_DSLBASE + 0x0038)
|
|
|
-#define AR531XPLUS_WDC (AR531XPLUS_DSLBASE + 0x003c)
|
|
|
-
|
|
|
-#define WDC_RESET 0x00000002 /* reset on watchdog */
|
|
|
-#define WDC_NMI 0x00000001 /* NMI on watchdog */
|
|
|
-#define WDC_IGNORE_EXPIRATION 0x00000000
|
|
|
-
|
|
|
-/*
|
|
|
- * Interface Debug
|
|
|
- */
|
|
|
-#define AR531X_FLASHDBG (AR531X_RESETTMR + 0x0040)
|
|
|
-#define AR531X_MIIDBG (AR531X_RESETTMR + 0x0044)
|
|
|
-
|
|
|
-
|
|
|
-/*
|
|
|
- * CPU Performance Counters
|
|
|
- */
|
|
|
-#define AR531XPLUS_PERFCNT0 (AR531XPLUS_DSLBASE + 0x0048)
|
|
|
-#define AR531XPLUS_PERFCNT1 (AR531XPLUS_DSLBASE + 0x004c)
|
|
|
-
|
|
|
-#define PERF_DATAHIT 0x0001 /* Count Data Cache Hits */
|
|
|
-#define PERF_DATAMISS 0x0002 /* Count Data Cache Misses */
|
|
|
-#define PERF_INSTHIT 0x0004 /* Count Instruction Cache Hits */
|
|
|
-#define PERF_INSTMISS 0x0008 /* Count Instruction Cache Misses */
|
|
|
-#define PERF_ACTIVE 0x0010 /* Count Active Processor Cycles */
|
|
|
-#define PERF_WBHIT 0x0020 /* Count CPU Write Buffer Hits */
|
|
|
-#define PERF_WBMISS 0x0040 /* Count CPU Write Buffer Misses */
|
|
|
-
|
|
|
-#define PERF_EB_ARDY 0x0001 /* Count EB_ARdy signal */
|
|
|
-#define PERF_EB_AVALID 0x0002 /* Count EB_AValid signal */
|
|
|
-#define PERF_EB_WDRDY 0x0004 /* Count EB_WDRdy signal */
|
|
|
-#define PERF_EB_RDVAL 0x0008 /* Count EB_RdVal signal */
|
|
|
-#define PERF_VRADDR 0x0010 /* Count valid read address cycles */
|
|
|
-#define PERF_VWADDR 0x0020 /* Count valid write address cycles */
|
|
|
-#define PERF_VWDATA 0x0040 /* Count valid write data cycles */
|
|
|
-
|
|
|
-/*
|
|
|
- * AHB Error Reporting.
|
|
|
- */
|
|
|
-#define AR531XPLUS_AHB_ERR0 (AR531XPLUS_DSLBASE + 0x0050) /* error */
|
|
|
-#define AR531XPLUS_AHB_ERR1 (AR531XPLUS_DSLBASE + 0x0054) /* haddr */
|
|
|
-#define AR531XPLUS_AHB_ERR2 (AR531XPLUS_DSLBASE + 0x0058) /* hwdata */
|
|
|
-#define AR531XPLUS_AHB_ERR3 (AR531XPLUS_DSLBASE + 0x005c) /* hrdata */
|
|
|
-#define AR531XPLUS_AHB_ERR4 (AR531XPLUS_DSLBASE + 0x0060) /* status */
|
|
|
-
|
|
|
-#define AHB_ERROR_DET 1 /* AHB Error has been detected, */
|
|
|
- /* write 1 to clear all bits in ERR0 */
|
|
|
-#define AHB_ERROR_OVR 2 /* AHB Error overflow has been detected */
|
|
|
-#define AHB_ERROR_WDT 4 /* AHB Error due to wdt instead of hresp */
|
|
|
-
|
|
|
-#define PROCERR_HMAST 0x0000000f
|
|
|
-#define PROCERR_HMAST_DFLT 0
|
|
|
-#define PROCERR_HMAST_WMAC 1
|
|
|
-#define PROCERR_HMAST_ENET 2
|
|
|
-#define PROCERR_HMAST_PCIENDPT 3
|
|
|
-#define PROCERR_HMAST_LOCAL 4
|
|
|
-#define PROCERR_HMAST_CPU 5
|
|
|
-#define PROCERR_HMAST_PCITGT 6
|
|
|
-
|
|
|
-#define PROCERR_HMAST_S 0
|
|
|
-#define PROCERR_HWRITE 0x00000010
|
|
|
-#define PROCERR_HSIZE 0x00000060
|
|
|
-#define PROCERR_HSIZE_S 5
|
|
|
-#define PROCERR_HTRANS 0x00000180
|
|
|
-#define PROCERR_HTRANS_S 7
|
|
|
-#define PROCERR_HBURST 0x00000e00
|
|
|
-#define PROCERR_HBURST_S 9
|
|
|
-
|
|
|
-
|
|
|
-
|
|
|
-/*
|
|
|
- * Clock Control
|
|
|
- */
|
|
|
-#define AR531XPLUS_PLLC_CTL (AR531XPLUS_DSLBASE + 0x0064)
|
|
|
-#define AR531XPLUS_PLLV_CTL (AR531XPLUS_DSLBASE + 0x0068)
|
|
|
-#define AR531XPLUS_CPUCLK (AR531XPLUS_DSLBASE + 0x006c)
|
|
|
-#define AR531XPLUS_AMBACLK (AR531XPLUS_DSLBASE + 0x0070)
|
|
|
-#define AR531XPLUS_SYNCCLK (AR531XPLUS_DSLBASE + 0x0074)
|
|
|
-#define AR531XPLUS_DSL_SLEEP_CTL (AR531XPLUS_DSLBASE + 0x0080)
|
|
|
-#define AR531XPLUS_DSL_SLEEP_DUR (AR531XPLUS_DSLBASE + 0x0084)
|
|
|
-
|
|
|
-/* PLLc Control fields */
|
|
|
-#define PLLC_REF_DIV_M 0x00000003
|
|
|
-#define PLLC_REF_DIV_S 0
|
|
|
-#define PLLC_FDBACK_DIV_M 0x0000007C
|
|
|
-#define PLLC_FDBACK_DIV_S 2
|
|
|
-#define PLLC_ADD_FDBACK_DIV_M 0x00000080
|
|
|
-#define PLLC_ADD_FDBACK_DIV_S 7
|
|
|
-#define PLLC_CLKC_DIV_M 0x0001c000
|
|
|
-#define PLLC_CLKC_DIV_S 14
|
|
|
-#define PLLC_CLKM_DIV_M 0x00700000
|
|
|
-#define PLLC_CLKM_DIV_S 20
|
|
|
-
|
|
|
-/* CPU CLK Control fields */
|
|
|
-#define CPUCLK_CLK_SEL_M 0x00000003
|
|
|
-#define CPUCLK_CLK_SEL_S 0
|
|
|
-#define CPUCLK_CLK_DIV_M 0x0000000c
|
|
|
-#define CPUCLK_CLK_DIV_S 2
|
|
|
-
|
|
|
-/* AMBA CLK Control fields */
|
|
|
-#define AMBACLK_CLK_SEL_M 0x00000003
|
|
|
-#define AMBACLK_CLK_SEL_S 0
|
|
|
-#define AMBACLK_CLK_DIV_M 0x0000000c
|
|
|
-#define AMBACLK_CLK_DIV_S 2
|
|
|
-
|
|
|
-#if defined(COBRA_EMUL)
|
|
|
-#define AR531XPLUS_AMBA_CLOCK_RATE 20000000
|
|
|
-#define AR531XPLUS_CPU_CLOCK_RATE 40000000
|
|
|
-#else
|
|
|
-#if defined(DEFAULT_PLL)
|
|
|
-#define AR531XPLUS_AMBA_CLOCK_RATE 40000000
|
|
|
-#define AR531XPLUS_CPU_CLOCK_RATE 40000000
|
|
|
-#else
|
|
|
-#define AR531XPLUS_AMBA_CLOCK_RATE 92000000
|
|
|
-#define AR531XPLUS_CPU_CLOCK_RATE 184000000
|
|
|
-#endif /* ! DEFAULT_PLL */
|
|
|
-#endif /* ! COBRA_EMUL */
|
|
|
-
|
|
|
-#define AR531XPLUS_UART_CLOCK_RATE AR531XPLUS_AMBA_CLOCK_RATE
|
|
|
-#define AR531XPLUS_SDRAM_CLOCK_RATE AR531XPLUS_AMBA_CLOCK_RATE
|
|
|
-
|
|
|
-/*
|
|
|
- * The UART computes baud rate as:
|
|
|
- * baud = clock / (16 * divisor)
|
|
|
- * where divisor is specified as a High Byte (DLM) and a Low Byte (DLL).
|
|
|
- */
|
|
|
-#define DESIRED_BAUD_RATE 38400
|
|
|
-
|
|
|
-/*
|
|
|
- * The WATCHDOG value is computed as
|
|
|
- * 10 seconds * AR531X_WATCHDOG_CLOCK_RATE
|
|
|
- */
|
|
|
-#define DESIRED_WATCHDOG_SECONDS 10
|
|
|
-#define AR531X_WATCHDOG_TIME \
|
|
|
- (DESIRED_WATCHDOG_SECONDS * AR531X_WATCHDOG_CLOCK_RATE)
|
|
|
-
|
|
|
-
|
|
|
-#define CLOCKCTL_UART0 0x0010 /* enable UART0 external clock */
|
|
|
-
|
|
|
-
|
|
|
- /*
|
|
|
- * Applicable "PCICFG" bits for WLAN(s). Assoc status and LED mode.
|
|
|
- */
|
|
|
-#define AR531X_PCICFG (AR531X_RESETTMR + 0x00b0)
|
|
|
-#define ASSOC_STATUS_M 0x00000003
|
|
|
-#define ASSOC_STATUS_NONE 0
|
|
|
-#define ASSOC_STATUS_PENDING 1
|
|
|
-#define ASSOC_STATUS_ASSOCIATED 2
|
|
|
-#define LED_MODE_M 0x0000001c
|
|
|
-#define LED_BLINK_THRESHOLD_M 0x000000e0
|
|
|
-#define LED_SLOW_BLINK_MODE 0x00000100
|
|
|
-
|
|
|
-/*
|
|
|
- * GPIO
|
|
|
- */
|
|
|
-
|
|
|
-#define AR531XPLUS_GPIO_DI (AR531XPLUS_DSLBASE + 0x0088)
|
|
|
-#define AR531XPLUS_GPIO_DO (AR531XPLUS_DSLBASE + 0x0090)
|
|
|
-#define AR531XPLUS_GPIO_CR (AR531XPLUS_DSLBASE + 0x0098)
|
|
|
-#define AR531XPLUS_GPIO_INT (AR531XPLUS_DSLBASE + 0x00a0)
|
|
|
-
|
|
|
-#define GPIO_CR_M(x) (1 << (x)) /* mask for i/o */
|
|
|
-#define GPIO_CR_O(x) (1 << (x)) /* output */
|
|
|
-#define GPIO_CR_I(x) (0 << (x)) /* input */
|
|
|
-
|
|
|
-#define GPIO_INT(x,Y) ((x) << (8 * (Y))) /* interrupt enable */
|
|
|
-#define GPIO_INT_M(Y) ((0x3F) << (8 * (Y))) /* mask for int */
|
|
|
-#define GPIO_INT_LVL(x,Y) ((x) << (8 * (Y) + 6)) /* interrupt level */
|
|
|
-#define GPIO_INT_LVL_M(Y) ((0x3) << (8 * (Y) + 6)) /* mask for int level */
|
|
|
-
|
|
|
-#define AR531XPLUS_RESET_GPIO 5
|
|
|
-#define AR531XPLUS_NUM_GPIO 22
|
|
|
-
|
|
|
-
|
|
|
-/*
|
|
|
- * PCI Clock Control
|
|
|
- */
|
|
|
-
|
|
|
-#define AR531XPLUS_PCICLK (AR531XPLUS_DSLBASE + 0x00a4)
|
|
|
-
|
|
|
-#define PCICLK_INPUT_M 0x3
|
|
|
-#define PCICLK_INPUT_S 0
|
|
|
-
|
|
|
-#define PCICLK_PLLC_CLKM 0
|
|
|
-#define PCICLK_PLLC_CLKM1 1
|
|
|
-#define PCICLK_PLLC_CLKC 2
|
|
|
-#define PCICLK_REF_CLK 3
|
|
|
-
|
|
|
-#define PCICLK_DIV_M 0xc
|
|
|
-#define PCICLK_DIV_S 2
|
|
|
-
|
|
|
-#define PCICLK_IN_FREQ 0
|
|
|
-#define PCICLK_IN_FREQ_DIV_6 1
|
|
|
-#define PCICLK_IN_FREQ_DIV_8 2
|
|
|
-#define PCICLK_IN_FREQ_DIV_10 3
|
|
|
-
|
|
|
-/*
|
|
|
- * Observation Control Register
|
|
|
- */
|
|
|
-#define AR531XPLUS_OCR (AR531XPLUS_DSLBASE + 0x00b0)
|
|
|
-#define OCR_GPIO0_IRIN 0x0040
|
|
|
-#define OCR_GPIO1_IROUT 0x0080
|
|
|
-#define OCR_GPIO3_RXCLR 0x0200
|
|
|
-
|
|
|
-/*
|
|
|
- * General Clock Control
|
|
|
- */
|
|
|
-
|
|
|
-#define AR531XPLUS_MISCCLK (AR531XPLUS_DSLBASE + 0x00b4)
|
|
|
-#define MISCCLK_PLLBYPASS_EN 0x00000001
|
|
|
-#define MISCCLK_PROCREFCLK 0x00000002
|
|
|
-
|
|
|
-/*
|
|
|
- * SDRAM Controller
|
|
|
- * - No read or write buffers are included.
|
|
|
- */
|
|
|
-#define AR531XPLUS_MEM_CFG (AR531XPLUS_SDRAMCTL + 0x00)
|
|
|
-#define AR531XPLUS_MEM_CTRL (AR531XPLUS_SDRAMCTL + 0x0c)
|
|
|
-#define AR531XPLUS_MEM_REF (AR531XPLUS_SDRAMCTL + 0x10)
|
|
|
-
|
|
|
-#define SDRAM_DATA_WIDTH_M 0x00006000
|
|
|
-#define SDRAM_DATA_WIDTH_S 13
|
|
|
-
|
|
|
-#define SDRAM_COL_WIDTH_M 0x00001E00
|
|
|
-#define SDRAM_COL_WIDTH_S 9
|
|
|
-
|
|
|
-#define SDRAM_ROW_WIDTH_M 0x000001E0
|
|
|
-#define SDRAM_ROW_WIDTH_S 5
|
|
|
-
|
|
|
-#define SDRAM_BANKADDR_BITS_M 0x00000018
|
|
|
-#define SDRAM_BANKADDR_BITS_S 3
|
|
|
-
|
|
|
-
|
|
|
-/*
|
|
|
- * SDRAM Memory Refresh (MEM_REF) value is computed as:
|
|
|
- * MEMCTL_SREFR = (Tr * hclk_freq) / R
|
|
|
- * where Tr is max. time of refresh of any single row
|
|
|
- * R is number of rows in the DRAM
|
|
|
- * For most 133MHz SDRAM parts, Tr=64ms, R=4096 or 8192
|
|
|
- */
|
|
|
-#if defined(COBRA_EMUL)
|
|
|
-#define AR531XPLUS_SDRAM_MEMORY_REFRESH_VALUE 0x96
|
|
|
-#else
|
|
|
-#if defined(DEFAULT_PLL)
|
|
|
-#define AR531XPLUS_SDRAM_MEMORY_REFRESH_VALUE 0x200
|
|
|
-#else
|
|
|
-#define AR531XPLUS_SDRAM_MEMORY_REFRESH_VALUE 0x61a
|
|
|
-#endif /* ! DEFAULT_PLL */
|
|
|
-#endif
|
|
|
-
|
|
|
-#if defined(AR531XPLUS)
|
|
|
-
|
|
|
-#define AR531XPLUS_SDRAM_DDR_SDRAM 0 /* Not DDR SDRAM */
|
|
|
-#define AR531XPLUS_SDRAM_DATA_WIDTH 16 /* bits */
|
|
|
-#define AR531XPLUS_SDRAM_COL_WIDTH 8
|
|
|
-#define AR531XPLUS_SDRAM_ROW_WIDTH 12
|
|
|
-
|
|
|
-#else
|
|
|
-
|
|
|
-#define AR531XPLUS_SDRAM_DDR_SDRAM 0 /* Not DDR SDRAM */
|
|
|
-#define AR531XPLUS_SDRAM_DATA_WIDTH 16
|
|
|
-#define AR531XPLUS_SDRAM_COL_WIDTH 8
|
|
|
-#define AR531XPLUS_SDRAM_ROW_WIDTH 12
|
|
|
-
|
|
|
-#endif /* ! AR531XPLUS */
|
|
|
-
|
|
|
-/*
|
|
|
- * SPI Flash Interface Registers
|
|
|
- */
|
|
|
-
|
|
|
-#define AR531XPLUS_SPI_CTL (AR531XPLUS_SPI + 0x00)
|
|
|
-#define AR531XPLUS_SPI_OPCODE (AR531XPLUS_SPI + 0x04)
|
|
|
-#define AR531XPLUS_SPI_DATA (AR531XPLUS_SPI + 0x08)
|
|
|
-
|
|
|
-#define SPI_CTL_START 0x00000100
|
|
|
-#define SPI_CTL_BUSY 0x00010000
|
|
|
-#define SPI_CTL_TXCNT_MASK 0x0000000f
|
|
|
-#define SPI_CTL_RXCNT_MASK 0x000000f0
|
|
|
-#define SPI_CTL_TX_RX_CNT_MASK 0x000000ff
|
|
|
-#define SPI_CTL_SIZE_MASK 0x00060000
|
|
|
-
|
|
|
-#define SPI_CTL_CLK_SEL_MASK 0x03000000
|
|
|
-#define SPI_OPCODE_MASK 0x000000ff
|
|
|
-
|
|
|
-/*
|
|
|
- * PCI-MAC Configuration registers
|
|
|
- */
|
|
|
-#define PCI_MAC_RC (AR531XPLUS_PCI + 0x4000)
|
|
|
-#define PCI_MAC_SCR (AR531XPLUS_PCI + 0x4004)
|
|
|
-#define PCI_MAC_INTPEND (AR531XPLUS_PCI + 0x4008)
|
|
|
-#define PCI_MAC_SFR (AR531XPLUS_PCI + 0x400C)
|
|
|
-#define PCI_MAC_PCICFG (AR531XPLUS_PCI + 0x4010)
|
|
|
-#define PCI_MAC_SREV (AR531XPLUS_PCI + 0x4020)
|
|
|
-
|
|
|
-#define PCI_MAC_RC_MAC 0x00000001
|
|
|
-#define PCI_MAC_RC_BB 0x00000002
|
|
|
-
|
|
|
-#define PCI_MAC_SCR_SLMODE_M 0x00030000
|
|
|
-#define PCI_MAC_SCR_SLMODE_S 16
|
|
|
-#define PCI_MAC_SCR_SLM_FWAKE 0
|
|
|
-#define PCI_MAC_SCR_SLM_FSLEEP 1
|
|
|
-#define PCI_MAC_SCR_SLM_NORMAL 2
|
|
|
-
|
|
|
-#define PCI_MAC_SFR_SLEEP 0x00000001
|
|
|
-
|
|
|
-#define PCI_MAC_PCICFG_SPWR_DN 0x00010000
|
|
|
-
|
|
|
-
|
|
|
-
|
|
|
-
|
|
|
-/*
|
|
|
- * PCI Bus Interface Registers
|
|
|
- */
|
|
|
-#define AR531XPLUS_PCI_1MS_REG (AR531XPLUS_PCI + 0x0008)
|
|
|
-#define AR531XPLUS_PCI_1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */
|
|
|
-
|
|
|
-#define AR531XPLUS_PCI_MISC_CONFIG (AR531XPLUS_PCI + 0x000c)
|
|
|
-#define AR531XPLUS_PCIMISC_TXD_EN 0x00000001 /* Enable TXD for fragments */
|
|
|
-#define AR531XPLUS_PCIMISC_CFG_SEL 0x00000002 /* mem or config cycles */
|
|
|
-#define AR531XPLUS_PCIMISC_GIG_MASK 0x0000000C /* bits 31-30 for pci req */
|
|
|
-#define AR531XPLUS_PCIMISC_RST_MODE 0x00000030
|
|
|
-#define AR531XPLUS_PCIRST_INPUT 0x00000000 /* 4:5=0 rst is input */
|
|
|
-#define AR531XPLUS_PCIRST_LOW 0x00000010 /* 4:5=1 rst to GND */
|
|
|
-#define AR531XPLUS_PCIRST_HIGH 0x00000020 /* 4:5=2 rst to VDD */
|
|
|
-#define AR531XPLUS_PCIGRANT_EN 0x00000000 /* 6:7=0 early grant en */
|
|
|
-#define AR531XPLUS_PCIGRANT_FRAME 0x00000040 /* 6:7=1 grant waits 4 frame */
|
|
|
-#define AR531XPLUS_PCIGRANT_IDLE 0x00000080 /* 6:7=2 grant waits 4 idle */
|
|
|
-#define AR531XPLUS_PCIGRANT_GAP 0x00000000 /* 6:7=2 grant waits 4 idle */
|
|
|
-#define AR531XPLUS_PCICACHE_DIS 0x00001000 /* PCI external access cache disable */
|
|
|
-
|
|
|
-#define AR531XPLUS_PCI_OUT_TSTAMP (AR531XPLUS_PCI + 0x0010)
|
|
|
-
|
|
|
-#define AR531XPLUS_PCI_UNCACHE_CFG (AR531XPLUS_PCI + 0x0014)
|
|
|
-
|
|
|
-#define AR531XPLUS_PCI_IN_EN (AR531XPLUS_PCI + 0x0100)
|
|
|
-#define AR531XPLUS_PCI_IN_EN0 0x01 /* Enable chain 0 */
|
|
|
-#define AR531XPLUS_PCI_IN_EN1 0x02 /* Enable chain 1 */
|
|
|
-#define AR531XPLUS_PCI_IN_EN2 0x04 /* Enable chain 2 */
|
|
|
-#define AR531XPLUS_PCI_IN_EN3 0x08 /* Enable chain 3 */
|
|
|
-
|
|
|
-#define AR531XPLUS_PCI_IN_DIS (AR531XPLUS_PCI + 0x0104)
|
|
|
-#define AR531XPLUS_PCI_IN_DIS0 0x01 /* Disable chain 0 */
|
|
|
-#define AR531XPLUS_PCI_IN_DIS1 0x02 /* Disable chain 1 */
|
|
|
-#define AR531XPLUS_PCI_IN_DIS2 0x04 /* Disable chain 2 */
|
|
|
-#define AR531XPLUS_PCI_IN_DIS3 0x08 /* Disable chain 3 */
|
|
|
-
|
|
|
-#define AR531XPLUS_PCI_IN_PTR (AR531XPLUS_PCI + 0x0200)
|
|
|
-
|
|
|
-#define AR531XPLUS_PCI_OUT_EN (AR531XPLUS_PCI + 0x0400)
|
|
|
-#define AR531XPLUS_PCI_OUT_EN0 0x01 /* Enable chain 0 */
|
|
|
-
|
|
|
-#define AR531XPLUS_PCI_OUT_DIS (AR531XPLUS_PCI + 0x0404)
|
|
|
-#define AR531XPLUS_PCI_OUT_DIS0 0x01 /* Disable chain 0 */
|
|
|
-
|
|
|
-#define AR531XPLUS_PCI_OUT_PTR (AR531XPLUS_PCI + 0x0408)
|
|
|
-
|
|
|
-#define AR531XPLUS_PCI_INT_STATUS (AR531XPLUS_PCI + 0x0500) /* write one to clr */
|
|
|
-#define AR531XPLUS_PCI_TXINT 0x00000001 /* Desc In Completed */
|
|
|
-#define AR531XPLUS_PCI_TXOK 0x00000002 /* Desc In OK */
|
|
|
-#define AR531XPLUS_PCI_TXERR 0x00000004 /* Desc In ERR */
|
|
|
-#define AR531XPLUS_PCI_TXEOL 0x00000008 /* Desc In End-of-List */
|
|
|
-#define AR531XPLUS_PCI_RXINT 0x00000010 /* Desc Out Completed */
|
|
|
-#define AR531XPLUS_PCI_RXOK 0x00000020 /* Desc Out OK */
|
|
|
-#define AR531XPLUS_PCI_RXERR 0x00000040 /* Desc Out ERR */
|
|
|
-#define AR531XPLUS_PCI_RXEOL 0x00000080 /* Desc Out EOL */
|
|
|
-#define AR531XPLUS_PCI_TXOOD 0x00000200 /* Desc In Out-of-Desc */
|
|
|
-#define AR531XPLUS_PCI_MASK 0x0000FFFF /* Desc Mask */
|
|
|
-#define AR531XPLUS_PCI_EXT_INT 0x02000000
|
|
|
-#define AR531XPLUS_PCI_ABORT_INT 0x04000000
|
|
|
-
|
|
|
-#define AR531XPLUS_PCI_INT_MASK (AR531XPLUS_PCI + 0x0504) /* same as INT_STATUS */
|
|
|
-
|
|
|
-#define AR531XPLUS_PCI_INTEN_REG (AR531XPLUS_PCI + 0x0508)
|
|
|
-#define AR531XPLUS_PCI_INT_DISABLE 0x00 /* disable pci interrupts */
|
|
|
-#define AR531XPLUS_PCI_INT_ENABLE 0x01 /* enable pci interrupts */
|
|
|
-
|
|
|
-#define AR531XPLUS_PCI_HOST_IN_EN (AR531XPLUS_PCI + 0x0800)
|
|
|
-#define AR531XPLUS_PCI_HOST_IN_DIS (AR531XPLUS_PCI + 0x0804)
|
|
|
-#define AR531XPLUS_PCI_HOST_IN_PTR (AR531XPLUS_PCI + 0x0810)
|
|
|
-#define AR531XPLUS_PCI_HOST_OUT_EN (AR531XPLUS_PCI + 0x0900)
|
|
|
-#define AR531XPLUS_PCI_HOST_OUT_DIS (AR531XPLUS_PCI + 0x0904)
|
|
|
-#define AR531XPLUS_PCI_HOST_OUT_PTR (AR531XPLUS_PCI + 0x0908)
|
|
|
-
|
|
|
-
|
|
|
-/*
|
|
|
- * Local Bus Interface Registers
|
|
|
- */
|
|
|
-#define AR531XPLUS_LB_CONFIG (AR531XPLUS_LOCAL + 0x0000)
|
|
|
-#define AR531XPLUS_LBCONF_OE 0x00000001 /* =1 OE is low-true */
|
|
|
-#define AR531XPLUS_LBCONF_CS0 0x00000002 /* =1 first CS is low-true */
|
|
|
-#define AR531XPLUS_LBCONF_CS1 0x00000004 /* =1 2nd CS is low-true */
|
|
|
-#define AR531XPLUS_LBCONF_RDY 0x00000008 /* =1 RDY is low-true */
|
|
|
-#define AR531XPLUS_LBCONF_WE 0x00000010 /* =1 Write En is low-true */
|
|
|
-#define AR531XPLUS_LBCONF_WAIT 0x00000020 /* =1 WAIT is low-true */
|
|
|
-#define AR531XPLUS_LBCONF_ADS 0x00000040 /* =1 Adr Strobe is low-true */
|
|
|
-#define AR531XPLUS_LBCONF_MOT 0x00000080 /* =0 Intel, =1 Motorola */
|
|
|
-#define AR531XPLUS_LBCONF_8CS 0x00000100 /* =1 8 bits CS, 0= 16bits */
|
|
|
-#define AR531XPLUS_LBCONF_8DS 0x00000200 /* =1 8 bits Data S, 0=16bits */
|
|
|
-#define AR531XPLUS_LBCONF_ADS_EN 0x00000400 /* =1 Enable ADS */
|
|
|
-#define AR531XPLUS_LBCONF_ADR_OE 0x00000800 /* =1 Adr cap on OE, WE or DS */
|
|
|
-#define AR531XPLUS_LBCONF_ADDT_MUX 0x00001000 /* =1 Adr and Data share bus */
|
|
|
-#define AR531XPLUS_LBCONF_DATA_OE 0x00002000 /* =1 Data cap on OE, WE, DS */
|
|
|
-#define AR531XPLUS_LBCONF_16DATA 0x00004000 /* =1 Data is 16 bits wide */
|
|
|
-#define AR531XPLUS_LBCONF_SWAPDT 0x00008000 /* =1 Byte swap data */
|
|
|
-#define AR531XPLUS_LBCONF_SYNC 0x00010000 /* =1 Bus synchronous to clk */
|
|
|
-#define AR531XPLUS_LBCONF_INT 0x00020000 /* =1 Intr is low true */
|
|
|
-#define AR531XPLUS_LBCONF_INT_CTR0 0x00000000 /* GND high-Z, Vdd is high-Z */
|
|
|
-#define AR531XPLUS_LBCONF_INT_CTR1 0x00040000 /* GND drive, Vdd is high-Z */
|
|
|
-#define AR531XPLUS_LBCONF_INT_CTR2 0x00080000 /* GND high-Z, Vdd drive */
|
|
|
-#define AR531XPLUS_LBCONF_INT_CTR3 0x000C0000 /* GND drive, Vdd drive */
|
|
|
-#define AR531XPLUS_LBCONF_RDY_WAIT 0x00100000 /* =1 RDY is negative of WAIT */
|
|
|
-#define AR531XPLUS_LBCONF_INT_PULSE 0x00200000 /* =1 Interrupt is a pulse */
|
|
|
-#define AR531XPLUS_LBCONF_ENABLE 0x00400000 /* =1 Falcon respond to LB */
|
|
|
-
|
|
|
-#define AR531XPLUS_LB_CLKSEL (AR531XPLUS_LOCAL + 0x0004)
|
|
|
-#define AR531XPLUS_LBCLK_EXT 0x0001 /* use external clk for lb */
|
|
|
-
|
|
|
-#define AR531XPLUS_LB_1MS (AR531XPLUS_LOCAL + 0x0008)
|
|
|
-#define AR531XPLUS_LB1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */
|
|
|
-
|
|
|
-#define AR531XPLUS_LB_MISCCFG (AR531XPLUS_LOCAL + 0x000C)
|
|
|
-#define AR531XPLUS_LBM_TXD_EN 0x00000001 /* Enable TXD for fragments */
|
|
|
-#define AR531XPLUS_LBM_RX_INTEN 0x00000002 /* Enable LB ints on RX ready */
|
|
|
-#define AR531XPLUS_LBM_MBOXWR_INTEN 0x00000004 /* Enable LB ints on mbox wr */
|
|
|
-#define AR531XPLUS_LBM_MBOXRD_INTEN 0x00000008 /* Enable LB ints on mbox rd */
|
|
|
-#define AR531XPLUS_LMB_DESCSWAP_EN 0x00000010 /* Byte swap desc enable */
|
|
|
-#define AR531XPLUS_LBM_TIMEOUT_MASK 0x00FFFF80
|
|
|
-#define AR531XPLUS_LBM_TIMEOUT_SHFT 7
|
|
|
-#define AR531XPLUS_LBM_PORTMUX 0x07000000
|
|
|
-
|
|
|
-
|
|
|
-#define AR531XPLUS_LB_RXTSOFF (AR531XPLUS_LOCAL + 0x0010)
|
|
|
-
|
|
|
-#define AR531XPLUS_LB_TX_CHAIN_EN (AR531XPLUS_LOCAL + 0x0100)
|
|
|
-#define AR531XPLUS_LB_TXEN_0 0x01
|
|
|
-#define AR531XPLUS_LB_TXEN_1 0x02
|
|
|
-#define AR531XPLUS_LB_TXEN_2 0x04
|
|
|
-#define AR531XPLUS_LB_TXEN_3 0x08
|
|
|
-
|
|
|
-#define AR531XPLUS_LB_TX_CHAIN_DIS (AR531XPLUS_LOCAL + 0x0104)
|
|
|
-#define AR531XPLUS_LB_TX_DESC_PTR (AR531XPLUS_LOCAL + 0x0200)
|
|
|
-
|
|
|
-#define AR531XPLUS_LB_RX_CHAIN_EN (AR531XPLUS_LOCAL + 0x0400)
|
|
|
-#define AR531XPLUS_LB_RXEN 0x01
|
|
|
-
|
|
|
-#define AR531XPLUS_LB_RX_CHAIN_DIS (AR531XPLUS_LOCAL + 0x0404)
|
|
|
-#define AR531XPLUS_LB_RX_DESC_PTR (AR531XPLUS_LOCAL + 0x0408)
|
|
|
-
|
|
|
-#define AR531XPLUS_LB_INT_STATUS (AR531XPLUS_LOCAL + 0x0500)
|
|
|
-#define AR531XPLUS_INT_TX_DESC 0x0001
|
|
|
-#define AR531XPLUS_INT_TX_OK 0x0002
|
|
|
-#define AR531XPLUS_INT_TX_ERR 0x0004
|
|
|
-#define AR531XPLUS_INT_TX_EOF 0x0008
|
|
|
-#define AR531XPLUS_INT_RX_DESC 0x0010
|
|
|
-#define AR531XPLUS_INT_RX_OK 0x0020
|
|
|
-#define AR531XPLUS_INT_RX_ERR 0x0040
|
|
|
-#define AR531XPLUS_INT_RX_EOF 0x0080
|
|
|
-#define AR531XPLUS_INT_TX_TRUNC 0x0100
|
|
|
-#define AR531XPLUS_INT_TX_STARVE 0x0200
|
|
|
-#define AR531XPLUS_INT_LB_TIMEOUT 0x0400
|
|
|
-#define AR531XPLUS_INT_LB_ERR 0x0800
|
|
|
-#define AR531XPLUS_INT_MBOX_WR 0x1000
|
|
|
-#define AR531XPLUS_INT_MBOX_RD 0x2000
|
|
|
-
|
|
|
-/* Bit definitions for INT MASK are the same as INT_STATUS */
|
|
|
-#define AR531XPLUS_LB_INT_MASK (AR531XPLUS_LOCAL + 0x0504)
|
|
|
-
|
|
|
-#define AR531XPLUS_LB_INT_EN (AR531XPLUS_LOCAL + 0x0508)
|
|
|
-#define AR531XPLUS_LB_MBOX (AR531XPLUS_LOCAL + 0x0600)
|
|
|
-
|
|
|
-
|
|
|
-
|
|
|
-/*
|
|
|
- * IR Interface Registers
|
|
|
- */
|
|
|
-#define AR531XPLUS_IR_PKTDATA (AR531XPLUS_IR + 0x0000)
|
|
|
-
|
|
|
-#define AR531XPLUS_IR_PKTLEN (AR531XPLUS_IR + 0x07fc) /* 0 - 63 */
|
|
|
-
|
|
|
-#define AR531XPLUS_IR_CONTROL (AR531XPLUS_IR + 0x0800)
|
|
|
-#define AR531XPLUS_IRCTL_TX 0x00000000 /* use as tranmitter */
|
|
|
-#define AR531XPLUS_IRCTL_RX 0x00000001 /* use as receiver */
|
|
|
-#define AR531XPLUS_IRCTL_SAMPLECLK_MASK 0x00003ffe /* Sample clk divisor mask */
|
|
|
-#define AR531XPLUS_IRCTL_SAMPLECLK_SHFT 1
|
|
|
-#define AR531XPLUS_IRCTL_OUTPUTCLK_MASK 0x03ffc000 /* Output clk divisor mask */
|
|
|
-#define AR531XPLUS_IRCTL_OUTPUTCLK_SHFT 14
|
|
|
-
|
|
|
-#define AR531XPLUS_IR_STATUS (AR531XPLUS_IR + 0x0804)
|
|
|
-#define AR531XPLUS_IRSTS_RX 0x00000001 /* receive in progress */
|
|
|
-#define AR531XPLUS_IRSTS_TX 0x00000002 /* transmit in progress */
|
|
|
-
|
|
|
-#define AR531XPLUS_IR_CONFIG (AR531XPLUS_IR + 0x0808)
|
|
|
-#define AR531XPLUS_IRCFG_INVIN 0x00000001 /* invert input polarity */
|
|
|
-#define AR531XPLUS_IRCFG_INVOUT 0x00000002 /* invert output polarity */
|
|
|
-#define AR531XPLUS_IRCFG_SEQ_START_WIN_SEL 0x00000004 /* 1 => 28, 0 => 7 */
|
|
|
-#define AR531XPLUS_IRCFG_SEQ_START_THRESH 0x000000f0 /* */
|
|
|
-#define AR531XPLUS_IRCFG_SEQ_END_UNIT_SEL 0x00000100 /* */
|
|
|
-#define AR531XPLUS_IRCFG_SEQ_END_UNIT_THRESH 0x00007e00 /* */
|
|
|
-#define AR531XPLUS_IRCFG_SEQ_END_WIN_SEL 0x00008000 /* */
|
|
|
-#define AR531XPLUS_IRCFG_SEQ_END_WIN_THRESH 0x001f0000 /* */
|
|
|
-#define AR531XPLUS_IRCFG_NUM_BACKOFF_WORDS 0x01e00000 /* */
|
|
|
-
|
|
|
-/*
|
|
|
- * PCI memory constants: Memory area 1 and 2 are the same size -
|
|
|
- * (twice the PCI_TLB_PAGE_SIZE). The definition of
|
|
|
- * CPU_TO_PCI_MEM_SIZE is coupled with the TLB setup routine
|
|
|
- * sysLib.c/sysTlbInit(), in that it assumes that 2 pages of size
|
|
|
- * PCI_TLB_PAGE_SIZE are set up in the TLB for each PCI memory space.
|
|
|
- */
|
|
|
-
|
|
|
-#define CPU_TO_PCI_MEM_BASE1 0xE0000000
|
|
|
-#define CPU_TO_PCI_MEM_SIZE1 (2*PCI_TLB_PAGE_SIZE)
|
|
|
-
|
|
|
-
|
|
|
-/* TLB attributes for PCI transactions */
|
|
|
-
|
|
|
-#define PCI_MMU_PAGEMASK 0x00003FFF
|
|
|
-#define MMU_PAGE_UNCACHED 0x00000010
|
|
|
-#define MMU_PAGE_DIRTY 0x00000004
|
|
|
-#define MMU_PAGE_VALID 0x00000002
|
|
|
-#define MMU_PAGE_GLOBAL 0x00000001
|
|
|
-#define PCI_MMU_PAGEATTRIB (MMU_PAGE_UNCACHED|MMU_PAGE_DIRTY|\
|
|
|
- MMU_PAGE_VALID|MMU_PAGE_GLOBAL)
|
|
|
-#define PCI_MEMORY_SPACE1_VIRT 0xE0000000 /* Used for non-prefet mem */
|
|
|
-#define PCI_MEMORY_SPACE1_PHYS 0x80000000
|
|
|
-#define PCI_TLB_PAGE_SIZE 0x01000000
|
|
|
-#define TLB_HI_MASK 0xFFFFE000
|
|
|
-#define TLB_LO_MASK 0x3FFFFFFF
|
|
|
-#define PAGEMASK_SHIFT 11
|
|
|
-#define TLB_LO_SHIFT 6
|
|
|
-
|
|
|
-#define PCI_MAX_LATENCY 0xFFF /* Max PCI latency */
|
|
|
-
|
|
|
-#define HOST_PCI_DEV_ID 3
|
|
|
-#define HOST_PCI_MBAR0 0x10000000
|
|
|
-#define HOST_PCI_MBAR1 0x20000000
|
|
|
-#define HOST_PCI_MBAR2 0x30000000
|
|
|
-
|
|
|
-#define HOST_PCI_SDRAM_BASEADDR HOST_PCI_MBAR1
|
|
|
-#define PCI_DEVICE_MEM_SPACE 0x800000
|
|
|
-
|
|
|
-
|
|
|
-typedef unsigned int AR531X_REG;
|
|
|
-
|
|
|
-#define sysRegRead(phys) \
|
|
|
- (*(volatile AR531X_REG *)PHYS_TO_K1(phys))
|
|
|
-
|
|
|
-#define sysRegWrite(phys, val) \
|
|
|
- ((*(volatile AR531X_REG *)PHYS_TO_K1(phys)) = (val))
|
|
|
-
|
|
|
-
|
|
|
-
|
|
|
-/*
|
|
|
- * This is board-specific data that is stored in a "fixed" location in flash.
|
|
|
- * It is shared across operating systems, so it should not be changed lightly.
|
|
|
- * The main reason we need it is in order to extract the ethernet MAC
|
|
|
- * address(es).
|
|
|
- */
|
|
|
-struct ar531x_boarddata {
|
|
|
- u32 magic; /* board data is valid */
|
|
|
-#define AR531X_BD_MAGIC 0x35333131 /* "5311", for all 531x platforms */
|
|
|
- u16 cksum; /* checksum (starting with BD_REV 2) */
|
|
|
- u16 rev; /* revision of this struct */
|
|
|
-#define BD_REV 4
|
|
|
- char boardName[64]; /* Name of board */
|
|
|
- u16 major; /* Board major number */
|
|
|
- u16 minor; /* Board minor number */
|
|
|
- u32 config; /* Board configuration */
|
|
|
-#define BD_ENET0 0x00000001 /* ENET0 is stuffed */
|
|
|
-#define BD_ENET1 0x00000002 /* ENET1 is stuffed */
|
|
|
-#define BD_UART1 0x00000004 /* UART1 is stuffed */
|
|
|
-#define BD_UART0 0x00000008 /* UART0 is stuffed (dma) */
|
|
|
-#define BD_RSTFACTORY 0x00000010 /* Reset factory defaults stuffed */
|
|
|
-#define BD_SYSLED 0x00000020 /* System LED stuffed */
|
|
|
-#define BD_EXTUARTCLK 0x00000040 /* External UART clock */
|
|
|
-#define BD_CPUFREQ 0x00000080 /* cpu freq is valid in nvram */
|
|
|
-#define BD_SYSFREQ 0x00000100 /* sys freq is set in nvram */
|
|
|
-#define BD_WLAN0 0x00000200 /* Enable WLAN0 */
|
|
|
-#define BD_MEMCAP 0x00000400 /* CAP SDRAM @ memCap for testing */
|
|
|
-#define BD_DISWATCHDOG 0x00000800 /* disable system watchdog */
|
|
|
-#define BD_WLAN1 0x00001000 /* Enable WLAN1 (ar5212) */
|
|
|
-#define BD_ISCASPER 0x00002000 /* FLAG for AR2312 */
|
|
|
-#define BD_WLAN0_2G_EN 0x00004000 /* FLAG for radio0_2G */
|
|
|
-#define BD_WLAN0_5G_EN 0x00008000 /* FLAG for radio0_2G */
|
|
|
-#define BD_WLAN1_2G_EN 0x00020000 /* FLAG for radio0_2G */
|
|
|
-#define BD_WLAN1_5G_EN 0x00040000 /* FLAG for radio0_2G */
|
|
|
- u16 resetConfigGpio; /* Reset factory GPIO pin */
|
|
|
- u16 sysLedGpio; /* System LED GPIO pin */
|
|
|
-
|
|
|
- u32 cpuFreq; /* CPU core frequency in Hz */
|
|
|
- u32 sysFreq; /* System frequency in Hz */
|
|
|
- u32 cntFreq; /* Calculated C0_COUNT frequency */
|
|
|
-
|
|
|
- u8 wlan0Mac[6];
|
|
|
- u8 enet0Mac[6];
|
|
|
- u8 enet1Mac[6];
|
|
|
-
|
|
|
- u16 pciId; /* Pseudo PCIID for common code */
|
|
|
- u16 memCap; /* cap bank1 in MB */
|
|
|
-
|
|
|
- /* version 3 */
|
|
|
- u8 wlan1Mac[6]; /* (ar5212) */
|
|
|
-};
|
|
|
-
|
|
|
-#endif
|
|
|
-
|
|
|
-#endif /* AR531X_H */
|