ar71xx: WNR2000v3: add speed_mask to Ethernet port LED initialization

This patch add speed_mask parameter to Ethernet port LED initialization
during system startup. LEDs are configured to show amber light for 10 Mbps
link and green for 100 Mbps as described on device label.

Signed-off-by: Michal Cieslakiewicz <[email protected]>

SVN-Revision: 48923

target/linux/ar71xx/base-files/etc/board.d/01_leds

@@ -680,14 +680,14 @@ wnr2000-v3)
 	ucidef_set_led_netdev "wan-amber" "WAN (amber)" "netgear:amber:wan" "eth0"
 	ucidef_set_led_default "wan-green" "WAN (green)" "netgear:green:wan" "0"
 	ucidef_set_led_netdev "wlan" "WLAN" "netgear:blue:wlan" "wlan0"
-	ucidef_set_led_switch "lan1green" "LAN1 (green)" "netgear:green:lan1" "switch0" "0x02"
-	ucidef_set_led_switch "lan2green" "LAN2 (green)" "netgear:green:lan2" "switch0" "0x04"
-	ucidef_set_led_switch "lan3green" "LAN3 (green)" "netgear:green:lan3" "switch0" "0x08"
-	ucidef_set_led_switch "lan4green" "LAN4 (green)" "netgear:green:lan4" "switch0" "0x10"
-	ucidef_set_led_default "lan1amber" "LAN1 (amber)" "netgear:amber:lan1" "0"
-	ucidef_set_led_default "lan2amber" "LAN2 (amber)" "netgear:amber:lan2" "0"
-	ucidef_set_led_default "lan3amber" "LAN3 (amber)" "netgear:amber:lan3" "0"
-	ucidef_set_led_default "lan4amber" "LAN4 (amber)" "netgear:amber:lan4" "0"
+	ucidef_set_led_switch "lan1green" "LAN1 (green)" "netgear:green:lan1" "switch0" "0x02" "0x04"
+	ucidef_set_led_switch "lan2green" "LAN2 (green)" "netgear:green:lan2" "switch0" "0x04" "0x04"
+	ucidef_set_led_switch "lan3green" "LAN3 (green)" "netgear:green:lan3" "switch0" "0x08" "0x04"
+	ucidef_set_led_switch "lan4green" "LAN4 (green)" "netgear:green:lan4" "switch0" "0x10" "0x04"
+	ucidef_set_led_switch "lan1amber" "LAN1 (amber)" "netgear:amber:lan1" "switch0" "0x02" "0x02"
+	ucidef_set_led_switch "lan2amber" "LAN2 (amber)" "netgear:amber:lan2" "switch0" "0x04" "0x02"
+	ucidef_set_led_switch "lan3amber" "LAN3 (amber)" "netgear:amber:lan3" "switch0" "0x08" "0x02"
+	ucidef_set_led_switch "lan4amber" "LAN4 (amber)" "netgear:amber:lan4" "switch0" "0x10" "0x02"
 	;;
 
 wnr2000-v4)