net: ar8327: modify some configuration of switch

Imported from https://source.codeaurora.org/quic/qsdk/system/openwrt/commit/?h=korg/linux-3.4.y/release/arugula_bb_cs&id=2be4f8a8b205ae1a37db44839864451ebe893e6e
Signed-off-by: Pavel Kubelun <[email protected]>

Enable flow control of LAN and WAN ports to
get better performance.
Setup pvid as 0 for all ports during initialisation
to avoid confusion during system or switch INIT.
Disable PORT MAC before config MAC to avoid it work abnormal.
This change is for IR-054144, IR-057315.

Change-Id: I345f3dffa59ad3f97150e09692723da12a7b1067
Signed-off-by: Zou Shunxiang <[email protected]>
Signed-off-by: xiaofeis <[email protected]>

target/linux/generic/files/drivers/net/phy/ar8216.h

@@ -154,6 +154,7 @@
 #define   AR8216_PORT_STATUS_LINK_UP	BIT(8)
 #define   AR8216_PORT_STATUS_LINK_AUTO	BIT(9)
 #define   AR8216_PORT_STATUS_LINK_PAUSE	BIT(10)
+#define   AR8216_PORT_STATUS_FLOW_CONTROL  BIT(12)
 
 #define AR8216_REG_PORT_CTRL(_i)	(AR8216_PORT_OFFSET(_i) + 0x0004)
 

target/linux/generic/files/drivers/net/phy/ar8327.c

@@ -685,12 +685,20 @@ ar8327_init_port(struct ar8xxx_priv *priv, int port)
 	else
 		t = AR8216_PORT_STATUS_LINK_AUTO;
 
-	ar8xxx_write(priv, AR8327_REG_PORT_STATUS(port), t);
+	if (port != AR8216_PORT_CPU && port != 6) {
+		/*hw limitation:if configure mac when there is traffic,
+		port MAC may work abnormal. Need disable lan&wan mac at fisrt*/
+		ar8xxx_write(priv, AR8327_REG_PORT_STATUS(port), 0);
+		msleep(100);
+		t |= AR8216_PORT_STATUS_FLOW_CONTROL;
+		ar8xxx_write(priv, AR8327_REG_PORT_STATUS(port), t);
+	} else {
+		ar8xxx_write(priv, AR8327_REG_PORT_STATUS(port), t);
+	}
+
 	ar8xxx_write(priv, AR8327_REG_PORT_HEADER(port), 0);
 
-	t = 1 << AR8327_PORT_VLAN0_DEF_SVID_S;
-	t |= 1 << AR8327_PORT_VLAN0_DEF_CVID_S;
-	ar8xxx_write(priv, AR8327_REG_PORT_VLAN0(port), t);
+	ar8xxx_write(priv, AR8327_REG_PORT_VLAN0(port), 0);
 
 	t = AR8327_PORT_VLAN1_OUT_MODE_UNTOUCH << AR8327_PORT_VLAN1_OUT_MODE_S;
 	ar8xxx_write(priv, AR8327_REG_PORT_VLAN1(port), t);