mpc85xx: build usb support into the kernel instead of packaging it separately

Signed-off-by: Felix Fietkau <[email protected]>

package/kernel/linux/modules/usb.mk

@@ -400,23 +400,6 @@ endef
 $(eval $(call KernelPackage,usb-ohci-pci))
 
 
-define KernelPackage/usb2-fsl
-  TITLE:=Support for Freescale USB2 controllers
-  DEPENDS:=@TARGET_mpc85xx
-  HIDDEN:=1
-  KCONFIG:=CONFIG_USB_FSL_MPH_DR_OF
-  FILES:=$(LINUX_DIR)/drivers/usb/host/fsl-mph-dr-of.ko
-  AUTOLOAD:=$(call AutoLoad,39,fsl-mph-dr-of,1)
-  $(call AddDepends/usb)
-endef
-
-define KernelPackage/usb2-fsl/description
- Kernel support for Freescale USB2 (EHCI) controllers
-endef
-
-$(eval $(call KernelPackage,usb2-fsl))
-
-
 define KernelPackage/usb2-omap
   TITLE:=Support for USB2 for OMAP
   DEPENDS:=@TARGET_omap +kmod-usb-phy-nop +kmod-usb-phy-am335x +kmod-usb2
@@ -464,8 +447,7 @@ define KernelPackage/usb2
 	+TARGET_brcm47xx:kmod-usb-bcma \
 	+TARGET_brcm47xx:kmod-usb-ssb \
 	+TARGET_bcm53xx:kmod-usb-bcma \
-	+TARGET_bcm53xx:kmod-phy-bcm-ns-usb2 \
-	+TARGET_mpc85xx:kmod-usb2-fsl
+	+TARGET_bcm53xx:kmod-phy-bcm-ns-usb2
   KCONFIG:=\
 	CONFIG_USB_EHCI_HCD \
 	CONFIG_USB_EHCI_ATH79=y \
@@ -486,10 +468,7 @@ define KernelPackage/usb2
   ifneq ($(wildcard $(LINUX_DIR)/drivers/usb/host/ehci-atmel.ko),)
     FILES+=$(LINUX_DIR)/drivers/usb/host/ehci-atmel.ko
   endif
-  ifneq ($(wildcard $(LINUX_DIR)/drivers/usb/host/ehci-fsl.ko),)
-    FILES+=$(LINUX_DIR)/drivers/usb/host/ehci-fsl.ko
-  endif
-  AUTOLOAD:=$(call AutoLoad,40,ehci-hcd ehci-platform ehci-orion ehci-atmel ehci-fsl,1)
+  AUTOLOAD:=$(call AutoLoad,40,ehci-hcd ehci-platform ehci-orion ehci-atmel,1)
   $(call AddDepends/usb)
 endef
 

target/linux/mpc85xx/config-4.4

@@ -80,8 +80,10 @@ CONFIG_EDAC_SUPPORT=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_EPAPR_BOOT is not set
 CONFIG_ETHERNET_PACKET_MANGLE=y
+# CONFIG_FHCI_DEBUG is not set
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
+CONFIG_FSL_GTM=y
 CONFIG_FSL_LBC=y
 CONFIG_FSL_PCI=y
 CONFIG_FSL_PQ_MDIO=y
@@ -196,6 +198,7 @@ CONFIG_MTD_SPI_NOR=y
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_NEED_PER_CPU_KM=y
 CONFIG_NEED_SG_DMA_LENGTH=y
+CONFIG_NLS=y
 # CONFIG_NONSTATIC_KERNEL is not set
 CONFIG_NO_BOOTMEM=y
 CONFIG_NR_IRQS=512
@@ -277,6 +280,7 @@ CONFIG_PPC_WERROR=y
 CONFIG_PROC_PAGE_MONITOR=y
 # CONFIG_PTP_1588_CLOCK_GIANFAR is not set
 CONFIG_QE_GPIO=y
+CONFIG_QE_USB=y
 CONFIG_QUICC_ENGINE=y
 CONFIG_RAS=y
 # CONFIG_RCU_STALL_COMMON is not set
@@ -319,11 +323,22 @@ CONFIG_UCC=y
 CONFIG_UCC_FAST=y
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_TX_ON_DEMAND is not set
+CONFIG_USB=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_HCD_PLATFORM is not set
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+CONFIG_USB_EHCI_PCI=y
+CONFIG_USB_FHCI_HCD=y
+CONFIG_USB_FSL_MPH_DR_OF=y
 CONFIG_USB_SUPPORT=y
+# CONFIG_USB_UHCI_HCD is not set
 CONFIG_VDSO32=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_WATCHDOG_CORE=y
 CONFIG_WORD_SIZE=32
 # CONFIG_XES_MPC85xx is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
 CONFIG_XZ_DEC_BCJ=y
 CONFIG_XZ_DEC_POWERPC=y

target/linux/mpc85xx/profiles/00-default.mk

@@ -7,7 +7,6 @@
 
 define Profile/Default
 	NAME:=Default Profile (all drivers)
-	PACKAGES:=kmod-usb-core kmod-usb2 kmod-usb2-fsl
 endef
 
 define Profile/Default/Description

target/linux/mpc85xx/profiles/tp-link.mk

@@ -7,9 +7,7 @@
 
 define Profile/TLWDR4900
 	NAME:=TP-Link TL-WDR4900
-	PACKAGES:=\
-		kmod-usb-core kmod-usb2 kmod-usb2-fsl \
-		kmod-ath9k wpad-mini
+	PACKAGES:=kmod-ath9k wpad-mini
 endef
 
 define Profile/TLWDR4900/Description