|
|
@@ -0,0 +1,322 @@
|
|
|
+/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
|
|
|
+ * Copyright (c) 2018, David Bauer <[email protected]>
|
|
|
+ *
|
|
|
+ * Permission to use, copy, modify, and/or distribute this software for any
|
|
|
+ * purpose with or without fee is hereby granted, provided that the above
|
|
|
+ * copyright notice and this permission notice appear in all copies.
|
|
|
+ *
|
|
|
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
|
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
|
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
|
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
|
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
|
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
|
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
|
+ *
|
|
|
+ */
|
|
|
+
|
|
|
+#include "qcom-ipq4019.dtsi"
|
|
|
+#include "qcom-ipq4019-bus.dtsi"
|
|
|
+#include <dt-bindings/gpio/gpio.h>
|
|
|
+#include <dt-bindings/input/input.h>
|
|
|
+#include <dt-bindings/soc/qcom,tcsr.h>
|
|
|
+
|
|
|
+/ {
|
|
|
+ model = "Netgear EX61X0v2";
|
|
|
+ compatible = "netgear,ex61x0v2", "qcom,ipq4019";
|
|
|
+
|
|
|
+ reserved-memory {
|
|
|
+ #address-cells = <0x1>;
|
|
|
+ #size-cells = <0x1>;
|
|
|
+ ranges;
|
|
|
+
|
|
|
+ smem@87e00000 {
|
|
|
+ reg = <0x87e00000 0x080000>;
|
|
|
+ no-map;
|
|
|
+ };
|
|
|
+
|
|
|
+ tz@87e80000 {
|
|
|
+ reg = <0x87e80000 0x180000>;
|
|
|
+ no-map;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ soc {
|
|
|
+ mdio@90000 {
|
|
|
+ status = "okay";
|
|
|
+ };
|
|
|
+
|
|
|
+ ess-psgmii@98000 {
|
|
|
+ status = "okay";
|
|
|
+ };
|
|
|
+
|
|
|
+ tcsr@1949000 {
|
|
|
+ compatible = "qcom,tcsr";
|
|
|
+ reg = <0x1949000 0x100>;
|
|
|
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
|
|
|
+ };
|
|
|
+
|
|
|
+ ess_tcsr@1953000 {
|
|
|
+ compatible = "qcom,tcsr";
|
|
|
+ reg = <0x1953000 0x1000>;
|
|
|
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
|
|
|
+ };
|
|
|
+
|
|
|
+ tcsr@1957000 {
|
|
|
+ compatible = "qcom,tcsr";
|
|
|
+ reg = <0x1957000 0x100>;
|
|
|
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
|
|
|
+ };
|
|
|
+
|
|
|
+ serial@78af000 {
|
|
|
+ pinctrl-0 = <&serial_pins>;
|
|
|
+ pinctrl-names = "default";
|
|
|
+ status = "okay";
|
|
|
+ };
|
|
|
+
|
|
|
+ crypto@8e3a000 {
|
|
|
+ status = "okay";
|
|
|
+ };
|
|
|
+
|
|
|
+ watchdog@b017000 {
|
|
|
+ status = "okay";
|
|
|
+ };
|
|
|
+
|
|
|
+ ess-switch@c000000 {
|
|
|
+ status = "okay";
|
|
|
+ };
|
|
|
+
|
|
|
+ edma@c080000 {
|
|
|
+ status = "okay";
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ aliases {
|
|
|
+ led-boot = &power_amber;
|
|
|
+ led-failsafe = &power_amber;
|
|
|
+ led-running = &power_green;
|
|
|
+ led-upgrade = &power_amber;
|
|
|
+ };
|
|
|
+
|
|
|
+ gpio-keys {
|
|
|
+ compatible = "gpio-keys";
|
|
|
+
|
|
|
+ wps {
|
|
|
+ label = "wps";
|
|
|
+ gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
|
|
|
+ linux,code = <KEY_WPS_BUTTON>;
|
|
|
+ };
|
|
|
+
|
|
|
+ reset {
|
|
|
+ label = "reset";
|
|
|
+ gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
|
|
|
+ linux,code = <KEY_RESTART>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ led_spi {
|
|
|
+ compatible = "spi-gpio";
|
|
|
+ #address-cells = <1>;
|
|
|
+ ranges;
|
|
|
+
|
|
|
+ gpio-sck = <&tlmm 5 GPIO_ACTIVE_HIGH>;
|
|
|
+ gpio-mosi = <&tlmm 4 GPIO_ACTIVE_HIGH>;
|
|
|
+ num-chipselects = <0>;
|
|
|
+
|
|
|
+ led_gpio: led_gpio@0 {
|
|
|
+ compatible = "fairchild,74hc595";
|
|
|
+ reg = <0>;
|
|
|
+ gpio-controller;
|
|
|
+ #gpio-cells = <2>;
|
|
|
+ registers-number = <1>;
|
|
|
+ spi-max-frequency = <1000000>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ gpio-leds {
|
|
|
+ compatible = "gpio-leds";
|
|
|
+
|
|
|
+ power_amber: power_amber {
|
|
|
+ label = "ex61x0v2:amber:power";
|
|
|
+ gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
|
|
|
+ };
|
|
|
+
|
|
|
+ power_green: power_green {
|
|
|
+ label = "ex61x0v2:green:power";
|
|
|
+ gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
|
|
|
+ };
|
|
|
+
|
|
|
+ right {
|
|
|
+ label = "ex61x0v2:blue:right";
|
|
|
+ gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
|
|
|
+ };
|
|
|
+
|
|
|
+ left {
|
|
|
+ label = "ex61x0v2:blue:left";
|
|
|
+ gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
|
|
|
+ };
|
|
|
+
|
|
|
+ client_green {
|
|
|
+ label = "ex61x0v2:green:client";
|
|
|
+ gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
|
|
|
+ };
|
|
|
+
|
|
|
+ client_red {
|
|
|
+ label = "ex61x0v2:red:client";
|
|
|
+ gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
|
|
|
+ };
|
|
|
+
|
|
|
+ router_green {
|
|
|
+ label = "ex61x0v2:green:router";
|
|
|
+ gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
|
|
|
+ };
|
|
|
+
|
|
|
+ router_red {
|
|
|
+ label = "ex61x0v2:red:router";
|
|
|
+ gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
|
|
|
+ };
|
|
|
+
|
|
|
+ wps {
|
|
|
+ label = "ex61x0v2:green:wps";
|
|
|
+ gpios = <&tlmm 1 GPIO_ACTIVE_LOW>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&tlmm {
|
|
|
+ serial_pins: serial_pinmux {
|
|
|
+ mux {
|
|
|
+ pins = "gpio60", "gpio61";
|
|
|
+ function = "blsp_uart0";
|
|
|
+ bias-disable;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ spi_0_pins: spi_0_pinmux {
|
|
|
+ pin {
|
|
|
+ function = "blsp_spi0";
|
|
|
+ pins = "gpio55", "gpio56", "gpio57";
|
|
|
+ drive-strength = <12>;
|
|
|
+ bias-disable;
|
|
|
+ };
|
|
|
+ pin_cs {
|
|
|
+ function = "gpio";
|
|
|
+ pins = "gpio54";
|
|
|
+ drive-strength = <2>;
|
|
|
+ bias-disable;
|
|
|
+ output-high;
|
|
|
+ };
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&spi_0 {
|
|
|
+ pinctrl-0 = <&spi_0_pins>;
|
|
|
+ pinctrl-names = "default";
|
|
|
+ status = "okay";
|
|
|
+ cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
|
|
|
+
|
|
|
+ mx25l12805d@0 {
|
|
|
+ compatible = "jedec,spi-nor";
|
|
|
+ reg = <0>;
|
|
|
+ spi-max-frequency = <24000000>;
|
|
|
+
|
|
|
+ partitions {
|
|
|
+ compatible = "fixed-partitions";
|
|
|
+ #address-cells = <1>;
|
|
|
+ #size-cells = <1>;
|
|
|
+
|
|
|
+ partition0@0 {
|
|
|
+ label = "SBL1";
|
|
|
+ reg = <0x00000000 0x00040000>;
|
|
|
+ read-only;
|
|
|
+ };
|
|
|
+
|
|
|
+ partition1@40000 {
|
|
|
+ label = "MIBIB";
|
|
|
+ reg = <0x00040000 0x00020000>;
|
|
|
+ read-only;
|
|
|
+ };
|
|
|
+
|
|
|
+ partition2@60000 {
|
|
|
+ label = "QSEE";
|
|
|
+ reg = <0x00060000 0x00060000>;
|
|
|
+ read-only;
|
|
|
+ };
|
|
|
+
|
|
|
+ partition3@c0000 {
|
|
|
+ label = "CDT";
|
|
|
+ reg = <0x000c0000 0x00010000>;
|
|
|
+ read-only;
|
|
|
+ };
|
|
|
+
|
|
|
+ partition4@d0000 {
|
|
|
+ label = "DDRPARAMS";
|
|
|
+ reg = <0x000d0000 0x00010000>;
|
|
|
+ read-only;
|
|
|
+ };
|
|
|
+
|
|
|
+ partition5@E0000 {
|
|
|
+ label = "APPSBLENV";
|
|
|
+ reg = <0x000e0000 0x00010000>;
|
|
|
+ read-only;
|
|
|
+ };
|
|
|
+
|
|
|
+ partition6@F0000 {
|
|
|
+ label = "APPSBL";
|
|
|
+ reg = <0x000f0000 0x00080000>;
|
|
|
+ read-only;
|
|
|
+ };
|
|
|
+
|
|
|
+ partition7@170000 {
|
|
|
+ label = "ART";
|
|
|
+ reg = <0x00170000 0x00010000>;
|
|
|
+ read-only;
|
|
|
+ };
|
|
|
+
|
|
|
+ partition8@180000 {
|
|
|
+ label = "config";
|
|
|
+ reg = <0x00180000 0x00010000>;
|
|
|
+ read-only;
|
|
|
+ };
|
|
|
+
|
|
|
+ partition9@190000 {
|
|
|
+ label = "pot";
|
|
|
+ reg = <0x00190000 0x00010000>;
|
|
|
+ read-only;
|
|
|
+ };
|
|
|
+
|
|
|
+ partition10@1a0000 {
|
|
|
+ label = "dnidata";
|
|
|
+ reg = <0x001a0000 0x00010000>;
|
|
|
+ read-only;
|
|
|
+ };
|
|
|
+
|
|
|
+ partition11@1b0000 {
|
|
|
+ label = "firmware";
|
|
|
+ reg = <0x001b0000 0x00e10000>;
|
|
|
+ };
|
|
|
+
|
|
|
+ partition12@fc0000 {
|
|
|
+ label = "language";
|
|
|
+ reg = <0x00fc0000 0x00040000>;
|
|
|
+ read-only;
|
|
|
+ };
|
|
|
+ };
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&blsp_dma {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&cryptobam {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&wifi0 {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&wifi1 {
|
|
|
+ status = "okay";
|
|
|
+};
|
David Bauer