Explorar o código

realtek: dts: RTL93xx whitespace cleanup

Replace spaces with tabs. No functional changes.

Signed-off-by: Markus Stockhausen <[email protected]>
Link: https://github.com/openwrt/openwrt/pull/21474
Signed-off-by: Stijn Tintel <[email protected]>
Markus Stockhausen hai 1 mes
pai
achega
985f30d576

+ 1 - 1
target/linux/realtek/dts/rtl931x.dtsi

@@ -157,7 +157,7 @@
 				     <GIC_SHARED 2 IRQ_TYPE_LEVEL_HIGH>, <GIC_SHARED 3 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>, <GIC_SHARED 5 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&lx_clk>;
-                };
+		};
 
 		uart0: uart@2000 {
 			compatible = "ns16550a";

+ 30 - 30
target/linux/realtek/dts/rtl93xx_linksys_lgs3xxc_nand_common.dtsi

@@ -90,39 +90,39 @@
 };
 
 &spi0 {
-        status = "okay";
-        flash@0 {
-                compatible = "jedec,spi-nor";
-                reg = <0>;
-                spi-max-frequency = <10000000>;
-
-                partitions {
-                        compatible = "fixed-partitions";
-                        #address-cells = <1>;
-                        #size-cells = <1>;
-
-                        partition@0 {
-                                label = "u-boot";
-                                reg = <0x0 0xe0000>;
+	status = "okay";
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0xe0000>;
 				read-only;
-                        };
-                        partition@e0000 {
-                                label = "u-boot-env";
-                                reg = <0xe0000 0x10000>;
-                        };
-                        partition@f0000 {
-                                label = "u-boot-env2";
-                                reg = <0xf0000 0x10000>;
-                        };
-                };
-        };
+			};
+			partition@e0000 {
+				label = "u-boot-env";
+				reg = <0xe0000 0x10000>;
+			};
+			partition@f0000 {
+				label = "u-boot-env2";
+				reg = <0xf0000 0x10000>;
+			};
+		};
+	};
 };
 
 &snand {
-        status = "okay";
-        flash@0 {
-                compatible = "spi-nand";
-                reg = <0>;
+	status = "okay";
+	flash@0 {
+		compatible = "spi-nand";
+		reg = <0>;
 
 		nand-ecc-engine = <&ecc0>;
 		nand-ecc-strength = <6>;
@@ -158,5 +158,5 @@
 				reg = <0x7300000 0x900000>;
 			};
 		};
-        };
+	};
 };