realtek: rename hpe,1920-8g-poe to match hardware

There are two hardware models of the HPE 1920-8g-poe switch. The version
currently in the repository is the model with a PoE budget of 180W. In
preparation of the addition of the 65W model, the existing model is
renamed to clarify the hardware version it targets.

As suggested by Pawel, the 'SUPPORTED_DEVICES' includes the old target
name to enable an upgrade path of builds with the old name.

Suggested-by: Pawel Dembicki <[email protected]>
Signed-off-by: Kevin Jilissen <[email protected]>

target/linux/realtek/base-files/etc/board.d/02_network

@@ -31,7 +31,7 @@ lan_mac_end=""
 label_mac=""
 case $board in
 hpe,1920-8g|\
-hpe,1920-8g-poe|\
+hpe,1920-8g-poe-180w|\
 hpe,1920-16g|\
 hpe,1920-24g)
 	label_mac=$(mtd_get_mac_binary factory 0x68)
@@ -67,7 +67,7 @@ done
 [ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
 
 case $board in
-hpe,1920-8g-poe)
+hpe,1920-8g-poe-180w)
 	ucidef_set_poe 180 "$lan_list_rev" "lan9 lan10"
 	;;
 netgear,gs110tpp-v1)

target/linux/realtek/base-files/etc/board.d/03_gpio_switches

@@ -6,7 +6,7 @@ board_config_update
 board=$(board_name)
 
 case "$board" in
-hpe,1920-8g-poe)
+hpe,1920-8g-poe-180w)
 	ucidef_add_gpio_switch "fan_ctrl" "Fan control" "456" "0"
 	;;
 esac

target/linux/realtek/dts-5.15/rtl8380_hpe_1920-8g-poe.dts → target/linux/realtek/dts-5.15/rtl8380_hpe_1920-8g-poe-180w.dts

@@ -3,8 +3,8 @@
 #include "rtl8380_hpe_1920-8g.dtsi"
 
 / {
-	compatible = "hpe,1920-8g-poe", "realtek,rtl838x-soc";
-	model = "HPE 1920-8G-PoE+ (JG922A)";
+	compatible = "hpe,1920-8g-poe-180w", "realtek,rtl838x-soc";
+	model = "HPE 1920-8G-PoE+ 180W (JG922A)";
 };
 
 &uart1 {

target/linux/realtek/image/rtl838x.mk

@@ -99,13 +99,14 @@ define Device/hpe_1920-8g
 endef
 TARGET_DEVICES += hpe_1920-8g
 
-define Device/hpe_1920-8g-poe
+define Device/hpe_1920-8g-poe-180w
   $(Device/hpe_1920)
   SOC := rtl8380
-  DEVICE_MODEL := 1920-8G-PoE+ (JG922A)
+  DEVICE_MODEL := 1920-8G-PoE+ 180W (JG922A)
   H3C_DEVICE_ID := 0x00010025
+  SUPPORTED_DEVICES += hpe_1920-8g-poe
 endef
-TARGET_DEVICES += hpe_1920-8g-poe
+TARGET_DEVICES += hpe_1920-8g-poe-180w
 
 define Device/hpe_1920-16g
   $(Device/hpe_1920)