ramips: add user-space support for the Tenda 3G300M

Signed-off-by: Cezary Jackiewicz <[email protected]>
Signed-off-by: Gabor Juhos <[email protected]>

SVN-Revision: 35245

target/linux/ramips/base-files/etc/diag.sh

@@ -33,6 +33,9 @@ get_status_led() {
 	3g-6200n)
 		status_led="edimax:green:power"
 		;;
+	3g300m)
+		status_led="tenda:blue:ap"
+		;;
 	argus-atp52b)
 		status_led="argus-atp52b:green:run"
 		;;

target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom

@@ -52,6 +52,7 @@ case "$FIRMWARE" in
 		;;
 
 	3g-6200n | \
+	3g300m | \
 	air3gii | \
 	all0239-3g | \
 	all0256n | \

target/linux/ramips/base-files/etc/uci-defaults/01_leds

@@ -18,6 +18,9 @@ case $board in
 		set_wifi_led "edimax:amber:wlan"
 		set_usb_led "edimax:blue:3g"
 		;;
+	3g300m)
+		set_usb_led "tenda:blue:3g"
+		;;
 	air3gii)
 		set_wifi_led "airlive:green:wlan"
 		set_usb_led "airlive:green:mobile"

target/linux/ramips/base-files/etc/uci-defaults/02_network

@@ -42,6 +42,7 @@ ramips_setup_interfaces()
 	ucidef_set_interface_loopback
 
 	case $board in
+	3g300m | \
 	all0256n | \
 	all5002 | \
 	broadway)
@@ -148,6 +149,7 @@ ramips_setup_macs()
 		lan_mac=$(ramips_get_mac_binary factory 40)
 		;;
 	3g-6200n | \
+	3g300m | \
 	air3gii | \
 	argus-atp52b | \
 	bc2 | \

target/linux/ramips/base-files/lib/preinit/06_set_iface_mac

@@ -9,6 +9,7 @@ preinit_set_mac_address() {
 
 	case $(ramips_board_name) in
 	3g-6200n |\
+	3g300m | \
 	mzk-w300nh2 |\
 	wl-330n |\
 	wl-330n3g)

target/linux/ramips/base-files/lib/ramips.sh

@@ -182,6 +182,9 @@ ramips_board_name() {
 	*"Sitecom WL-351 v1 002")
 		name="wl-351"
 		;;
+	*"Tenda 3G300M")
+		name="3g300m"
+		;;
 	*"Tenda W306R V2.0")
 		name="w306r-v20"
 		;;

target/linux/ramips/base-files/lib/upgrade/platform.sh

@@ -15,6 +15,7 @@ platform_check_image() {
 
 	case "$board" in
 	3g-6200n | \
+	3g300m | \
 	air3gii | \
 	all0239-3g | \
 	all0256n | \