ath79: remove further redundant mtd-mac-address for wmac

For several devices, wmac MAC address is set from art 0x1002
explicitly by using mtd-mac-address although mtd-cal-data is
pulled from art 0x1000.

With the MAC address in 0x1002, the driver should automatically
use it when reading caldata from 0x1000. Thus, remove the
redundant mtd-mac-address for those devices.

This patch addresses the cases where the calibration data partition
is not labelled art, having been overlooked in the first patch.

Signed-off-by: Adrian Schmutzler <[email protected]>

target/linux/ath79/dts/ar9342_ubnt_nanostation-ac.dts

@@ -74,5 +74,4 @@
 	status = "okay";
 
 	mtd-cal-data = <&eeprom 0x1000>;
-	mtd-mac-address = <&eeprom 0x1002>;
 };

target/linux/ath79/dts/ar9342_ubnt_wa.dtsi

@@ -89,5 +89,4 @@
 
 	qca,disable-5ghz;
 	mtd-cal-data = <&eeprom 0x1000>;
-	mtd-mac-address = <&eeprom 0x1002>;
 };

target/linux/ath79/dts/ar9342_ubnt_xw.dtsi

@@ -116,7 +116,6 @@
 	status = "okay";
 
 	mtd-cal-data = <&eeprom 0x1000>;
-	mtd-mac-address = <&eeprom 0x1002>;
 };
 
 &eth0 {

target/linux/ath79/dts/qca9533_ubnt_acb-isp.dts

@@ -95,5 +95,4 @@
 &wmac {
 	status = "okay";
 	mtd-cal-data = <&eeprom 0x1000>;
-	mtd-mac-address = <&eeprom 0x1002>;
 };