|
|
@@ -0,0 +1,186 @@
|
|
|
+Index: linux-2.6.24.5/drivers/w1/masters/Kconfig
|
|
|
+===================================================================
|
|
|
+--- linux-2.6.23.16.orig/drivers/w1/masters/Kconfig
|
|
|
++++ linux-2.6.23.16/drivers/w1/masters/Kconfig
|
|
|
+@@ -42,5 +42,15 @@ config W1_MASTER_DS1WM
|
|
|
+ in HP iPAQ devices like h5xxx, h2200, and ASIC3-based like
|
|
|
+ hx4700.
|
|
|
+
|
|
|
++config W1_MASTER_GPIO
|
|
|
++ tristate "GPIO 1-wire busmaster"
|
|
|
++ depends on GENERIC_GPIO
|
|
|
++ help
|
|
|
++ Say Y here if you want to communicate with your 1-wire devices using
|
|
|
++ GPIO pins. This driver uses the GPIO API to control the wire.
|
|
|
++
|
|
|
++ This support is also available as a module. If so, the module
|
|
|
++ will be called w1-gpio.ko.
|
|
|
++
|
|
|
+ endmenu
|
|
|
+
|
|
|
+Index: linux-2.6.23.16/drivers/w1/masters/Makefile
|
|
|
+===================================================================
|
|
|
+--- linux-2.6.23.16.orig/drivers/w1/masters/Makefile
|
|
|
++++ linux-2.6.23.16/drivers/w1/masters/Makefile
|
|
|
+@@ -6,3 +6,4 @@ obj-$(CONFIG_W1_MASTER_MATROX) += matro
|
|
|
+ obj-$(CONFIG_W1_MASTER_DS2490) += ds2490.o
|
|
|
+ obj-$(CONFIG_W1_MASTER_DS2482) += ds2482.o
|
|
|
+ obj-$(CONFIG_W1_MASTER_DS1WM) += ds1wm.o
|
|
|
++obj-$(CONFIG_W1_MASTER_GPIO) += w1-gpio.o
|
|
|
+Index: linux-2.6.23.16/drivers/w1/masters/w1-gpio.c
|
|
|
+===================================================================
|
|
|
+--- /dev/null
|
|
|
++++ linux-2.6.23.16/drivers/w1/masters/w1-gpio.c
|
|
|
+@@ -0,0 +1,124 @@
|
|
|
++/*
|
|
|
++ * w1-gpio - GPIO w1 bus master driver
|
|
|
++ *
|
|
|
++ * Copyright (C) 2007 Ville Syrjala <[email protected]>
|
|
|
++ *
|
|
|
++ * This program is free software; you can redistribute it and/or modify
|
|
|
++ * it under the terms of the GNU General Public License version 2
|
|
|
++ * as published by the Free Software Foundation.
|
|
|
++ */
|
|
|
++
|
|
|
++#include <linux/init.h>
|
|
|
++#include <linux/module.h>
|
|
|
++#include <linux/platform_device.h>
|
|
|
++#include <linux/w1-gpio.h>
|
|
|
++
|
|
|
++#include "../w1.h"
|
|
|
++#include "../w1_int.h"
|
|
|
++
|
|
|
++#include <asm/gpio.h>
|
|
|
++
|
|
|
++static void w1_gpio_write_bit_dir(void *data, u8 bit)
|
|
|
++{
|
|
|
++ struct w1_gpio_platform_data *pdata = data;
|
|
|
++
|
|
|
++ if (bit)
|
|
|
++ gpio_direction_input(pdata->pin);
|
|
|
++ else
|
|
|
++ gpio_direction_output(pdata->pin, 0);
|
|
|
++}
|
|
|
++
|
|
|
++static void w1_gpio_write_bit_val(void *data, u8 bit)
|
|
|
++{
|
|
|
++ struct w1_gpio_platform_data *pdata = data;
|
|
|
++
|
|
|
++ gpio_set_value(pdata->pin, bit);
|
|
|
++}
|
|
|
++
|
|
|
++static u8 w1_gpio_read_bit(void *data)
|
|
|
++{
|
|
|
++ struct w1_gpio_platform_data *pdata = data;
|
|
|
++
|
|
|
++ return gpio_get_value(pdata->pin);
|
|
|
++}
|
|
|
++
|
|
|
++static int __init w1_gpio_probe(struct platform_device *pdev)
|
|
|
++{
|
|
|
++ struct w1_bus_master *master;
|
|
|
++ struct w1_gpio_platform_data *pdata = pdev->dev.platform_data;
|
|
|
++ int err;
|
|
|
++
|
|
|
++ if (!pdata)
|
|
|
++ return -ENXIO;
|
|
|
++
|
|
|
++ master = kzalloc(sizeof(struct w1_bus_master), GFP_KERNEL);
|
|
|
++ if (!master)
|
|
|
++ return -ENOMEM;
|
|
|
++
|
|
|
++ err = gpio_request(pdata->pin, "w1");
|
|
|
++ if (err)
|
|
|
++ goto free_master;
|
|
|
++
|
|
|
++ master->data = pdata;
|
|
|
++ master->read_bit = w1_gpio_read_bit;
|
|
|
++
|
|
|
++ if (pdata->is_open_drain) {
|
|
|
++ gpio_direction_output(pdata->pin, 1);
|
|
|
++ master->write_bit = w1_gpio_write_bit_val;
|
|
|
++ } else {
|
|
|
++ gpio_direction_input(pdata->pin);
|
|
|
++ master->write_bit = w1_gpio_write_bit_dir;
|
|
|
++ }
|
|
|
++
|
|
|
++ err = w1_add_master_device(master);
|
|
|
++ if (err)
|
|
|
++ goto free_gpio;
|
|
|
++
|
|
|
++ platform_set_drvdata(pdev, master);
|
|
|
++
|
|
|
++ return 0;
|
|
|
++
|
|
|
++ free_gpio:
|
|
|
++ gpio_free(pdata->pin);
|
|
|
++ free_master:
|
|
|
++ kfree(master);
|
|
|
++
|
|
|
++ return err;
|
|
|
++}
|
|
|
++
|
|
|
++static int __exit w1_gpio_remove(struct platform_device *pdev)
|
|
|
++{
|
|
|
++ struct w1_bus_master *master = platform_get_drvdata(pdev);
|
|
|
++ struct w1_gpio_platform_data *pdata = pdev->dev.platform_data;
|
|
|
++
|
|
|
++ w1_remove_master_device(master);
|
|
|
++ gpio_free(pdata->pin);
|
|
|
++ kfree(master);
|
|
|
++
|
|
|
++ return 0;
|
|
|
++}
|
|
|
++
|
|
|
++static struct platform_driver w1_gpio_driver = {
|
|
|
++ .driver = {
|
|
|
++ .name = "w1-gpio",
|
|
|
++ .owner = THIS_MODULE,
|
|
|
++ },
|
|
|
++ .remove = __exit_p(w1_gpio_remove),
|
|
|
++};
|
|
|
++
|
|
|
++static int __init w1_gpio_init(void)
|
|
|
++{
|
|
|
++ return platform_driver_probe(&w1_gpio_driver, w1_gpio_probe);
|
|
|
++}
|
|
|
++
|
|
|
++static void __exit w1_gpio_exit(void)
|
|
|
++{
|
|
|
++ platform_driver_unregister(&w1_gpio_driver);
|
|
|
++}
|
|
|
++
|
|
|
++module_init(w1_gpio_init);
|
|
|
++module_exit(w1_gpio_exit);
|
|
|
++
|
|
|
++MODULE_DESCRIPTION("GPIO w1 bus master driver");
|
|
|
++MODULE_AUTHOR("Ville Syrjala <[email protected]>");
|
|
|
++MODULE_LICENSE("GPL");
|
|
|
+Index: linux-2.6.23.16/include/linux/w1-gpio.h
|
|
|
+===================================================================
|
|
|
+--- /dev/null
|
|
|
++++ linux-2.6.23.16/include/linux/w1-gpio.h
|
|
|
+@@ -0,0 +1,23 @@
|
|
|
++/*
|
|
|
++ * w1-gpio interface to platform code
|
|
|
++ *
|
|
|
++ * Copyright (C) 2007 Ville Syrjala <[email protected]>
|
|
|
++ *
|
|
|
++ * This program is free software; you can redistribute it and/or modify
|
|
|
++ * it under the terms of the GNU General Public License version 2
|
|
|
++ * as published by the Free Software Foundation.
|
|
|
++ */
|
|
|
++#ifndef _LINUX_W1_GPIO_H
|
|
|
++#define _LINUX_W1_GPIO_H
|
|
|
++
|
|
|
++/**
|
|
|
++ * struct w1_gpio_platform_data - Platform-dependent data for w1-gpio
|
|
|
++ * @pin: GPIO pin to use
|
|
|
++ * @is_open_drain: GPIO pin is configured as open drain
|
|
|
++ */
|
|
|
++struct w1_gpio_platform_data {
|
|
|
++ unsigned int pin;
|
|
|
++ unsigned int is_open_drain:1;
|
|
|
++};
|
|
|
++
|
|
|
++#endif /* _LINUX_W1_GPIO_H */
|