upgrade to 3.3, enable framebuffer

SVN-Revision: 31576

target/linux/omap4/Makefile

@@ -11,7 +11,8 @@ BOARD:=omap4
 BOARDNAME:=TI OMAP4
 FEATURES:=usb targz audio display
 
-LINUX_VERSION:=3.2.16
+LINUX_VERSION:=3.3.4
+
 CFLAGS:=-Os -pipe -march=armv7-a -mfpu=vfpv3-d16 -mfloat-abi=softfp
 MAINTAINER:=Imre Kaloz <[email protected]>
 

target/linux/omap4/config-default

@@ -1,9 +1,12 @@
 CONFIG_ALIGNMENT_TRAP=y
 # CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_HAS_BARRIERS=y
 CONFIG_ARCH_HAS_CPUFREQ=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
 CONFIG_ARCH_HAS_OPP=y
+CONFIG_ARCH_NR_GPIO=0
 CONFIG_ARCH_OMAP=y
 # CONFIG_ARCH_OMAP1 is not set
 # CONFIG_ARCH_OMAP2 is not set
@@ -11,6 +14,7 @@ CONFIG_ARCH_OMAP2PLUS=y
 CONFIG_ARCH_OMAP2PLUS_TYPICAL=y
 # CONFIG_ARCH_OMAP3 is not set
 CONFIG_ARCH_OMAP4=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
@@ -31,7 +35,10 @@ CONFIG_ARM_ERRATA_720789=y
 # CONFIG_ARM_ERRATA_754327 is not set
 # CONFIG_ARM_ERRATA_764369 is not set
 CONFIG_ARM_GIC=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_ARM_L1_CACHE_SHIFT_6=y
+# CONFIG_ARM_LPAE is not set
+CONFIG_ARM_NR_BANKS=8
 CONFIG_ARM_PATCH_PHYS_VIRT=y
 CONFIG_ARM_THUMB=y
 # CONFIG_ARM_THUMBEE is not set
@@ -51,6 +58,7 @@ CONFIG_CFG80211_DEFAULT_PS=y
 CONFIG_CFG80211_WEXT=y
 CONFIG_CLKDEV_LOOKUP=y
 CONFIG_CLKSRC_MMIO=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_CPU_32v6K=y
 CONFIG_CPU_32v7=y
 CONFIG_CPU_ABRT_EV7=y
@@ -75,17 +83,39 @@ CONFIG_CRYPTO_ARC4=m
 # CONFIG_DEBUG_HIGHMEM is not set
 # CONFIG_DEBUG_USER is not set
 CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DUMMY_CONSOLE=y
 # CONFIG_DW_WATCHDOG is not set
 CONFIG_EXT4_FS=y
+CONFIG_FB=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_OMAP2=y
+CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
+CONFIG_FB_OMAP2_NUM_FBS=3
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+# CONFIG_FB_SM7XX is not set
+CONFIG_FB_TILEBLITTING=y
+# CONFIG_FB_WMT_GE_ROPS is not set
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x16=y
+CONFIG_FONT_8x8=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FRAME_POINTER=y
 CONFIG_FS_MBCACHE=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_GENERIC_CPU_DEVICES is not set
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_IRQ_CHIP=y
 CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PCI_IOMAP=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_TWL4030=y
 CONFIG_HARDIRQS_SW_RESEND=y
@@ -117,9 +147,11 @@ CONFIG_HAVE_PERF_EVENTS=y
 CONFIG_HAVE_PROC_CPU=y
 CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
 CONFIG_HAVE_SCHED_CLOCK=y
+CONFIG_HAVE_SMP=y
 CONFIG_HAVE_SPARSE_IRQ=y
 CONFIG_HIGHMEM=y
 # CONFIG_HIGHPTE is not set
+CONFIG_HW_CONSOLE=y
 CONFIG_HZ=128
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
@@ -127,7 +159,6 @@ CONFIG_I2C_OMAP=y
 # CONFIG_I2C_PXA_PCI is not set
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_INPUT=y
-# CONFIG_INPUT_GPIO_BUTTONS is not set
 CONFIG_INPUT_KEYBOARD=y
 CONFIG_INPUT_TWL4030_PWRBUTTON=y
 # CONFIG_INPUT_TWL4030_VIBRA is not set
@@ -160,6 +191,7 @@ CONFIG_MAC80211_RC_MINSTREL_HT=y
 CONFIG_MACH_OMAP4_PANDA=y
 # CONFIG_MACH_OMAP_4430SDP is not set
 # CONFIG_MACH_OMAP_GENERIC is not set
+CONFIG_MDIO_BOARDINFO=y
 CONFIG_MFD_OMAP_USB_HOST=y
 # CONFIG_MFD_T7L66XB is not set
 # CONFIG_MFD_TWL4030_AUDIO is not set
@@ -176,6 +208,7 @@ CONFIG_MTD_DATAFLASH=y
 # CONFIG_MTD_DATAFLASH_OTP is not set
 # CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
 CONFIG_MTD_PHYSMAP=y
+CONFIG_MULTI_IRQ_HANDLER=y
 CONFIG_MUTEX_SPIN_ON_OWNER=y
 # CONFIG_MWIFIEX is not set
 CONFIG_NEED_DMA_MAP_STATE=y
@@ -185,7 +218,20 @@ CONFIG_NEON=y
 CONFIG_NLS=y
 CONFIG_NO_HZ=y
 CONFIG_NR_CPUS=2
-# CONFIG_OMAP2_DSS is not set
+CONFIG_OMAP2_DSS=y
+# CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS is not set
+CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y
+CONFIG_OMAP2_DSS_DPI=y
+CONFIG_OMAP2_DSS_DSI=y
+# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
+CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
+# CONFIG_OMAP2_DSS_RFBI is not set
+CONFIG_OMAP2_DSS_SLEEP_AFTER_VENC_RESET=y
+# CONFIG_OMAP2_DSS_VENC is not set
+CONFIG_OMAP2_VRAM=y
+CONFIG_OMAP2_VRAM_SIZE=32
+CONFIG_OMAP4_DSS_HDMI=y
+CONFIG_OMAP4_ERRATA_I688=y
 CONFIG_OMAP_32K_TIMER=y
 CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
@@ -204,6 +250,11 @@ CONFIG_OUTER_CACHE=y
 CONFIG_OUTER_CACHE_SYNC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PANEL_DVI=y
+CONFIG_PANEL_GENERIC_DPI=y
+# CONFIG_PANEL_LGPHILIPS_LB035Q02 is not set
+# CONFIG_PANEL_PICODLP is not set
+# CONFIG_PANEL_TPO_TD043MTEA1 is not set
 # CONFIG_PCI_SYSCALL is not set
 CONFIG_PERF_USE_VMALLOC=y
 CONFIG_PHYLIB=y
@@ -241,6 +292,7 @@ CONFIG_REGULATOR_TWL4030=y
 CONFIG_RFS_ACCEL=y
 CONFIG_RPS=y
 CONFIG_RTC_CLASS=y
+# CONFIG_RTC_DRV_PT7C4338 is not set
 CONFIG_RTC_DRV_TWL4030=y
 # CONFIG_RTL8192CU is not set
 # CONFIG_SCSI_DMA is not set
@@ -285,15 +337,14 @@ CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGETFS is not set
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
 # CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
 CONFIG_USB_GADGET_VBUS_DRAW=2
-# CONFIG_USB_G_ACM_MS is not set
 # CONFIG_USB_G_DBGP is not set
 # CONFIG_USB_G_HID is not set
 # CONFIG_USB_G_NCM is not set
 # CONFIG_USB_G_PRINTER is not set
 # CONFIG_USB_G_SERIAL is not set
 # CONFIG_USB_M66592 is not set
+# CONFIG_USB_MV_UDC is not set
 # CONFIG_USB_NET2272 is not set
 CONFIG_USB_NET_SMSC95XX=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
@@ -303,7 +354,6 @@ CONFIG_USB_OHCI_HCD_OMAP3=y
 CONFIG_USB_OMAP=y
 CONFIG_USB_OTG_UTILS=y
 # CONFIG_USB_R8A66597 is not set
-# CONFIG_USB_RENESAS_USBHS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_USBNET=y
 # CONFIG_USB_ZERO is not set
@@ -311,14 +361,16 @@ CONFIG_USE_GENERIC_SMP_HELPERS=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_VFP=y
 CONFIG_VFPv3=y
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_W35UND is not set
 # CONFIG_WL1251 is not set
-CONFIG_WL12XX_MENU=m
 CONFIG_WL12XX=m
+CONFIG_WL12XX_MENU=m
+CONFIG_WL12XX_PLATFORM_DATA=y
 CONFIG_WL12XX_SDIO=m
-# CONFIG_WL12XX_SDIO_TEST is not set
 # CONFIG_WL12XX_SPI is not set
-CONFIG_WL12XX_PLATFORM_DATA=y
 CONFIG_XPS=y
 CONFIG_XZ_DEC=y
 CONFIG_ZBOOT_ROM_BSS=0

target/linux/omap4/patches/000-hwmod_dont_wait.patch

@@ -1,194 +0,0 @@
-From: Benoit Cousson <[email protected]>
-Date: Sat, 17 Dec 2011 00:09:11 +0000 (-0800)
-Subject: ARM: OMAP4: hwmod: Don't wait for the idle status if modulemode is not supported
-X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Ftorvalds%2Flinux.git;a=commitdiff_plain;h=bfc141e3a515008d85e57af39c9faa4d2bbc65e0;hp=ddf536d0d7e1f0b63a681c970888730a4437414d
-
-ARM: OMAP4: hwmod: Don't wait for the idle status if modulemode is not supported
-
-If the module does not have any modulemode, the _disable_module function
-will do nothing. There is then no point waiting for a idle status change.
-
-It will remove the following warnings.
-
-[    0.331848] omap_hwmod: dmm: _wait_target_disable failed
-[    0.339935] omap_hwmod: emif_fw: _wait_target_disable failed
-[    0.348358] omap_hwmod: l3_main_1: _wait_target_disable failed
-[    0.356964] omap_hwmod: l3_main_2: _wait_target_disable failed
-[    0.365600] omap_hwmod: l4_abe: _wait_target_disable failed
-[    0.373931] omap_hwmod: l4_cfg: _wait_target_disable failed
-[    0.382263] omap_hwmod: l4_per: _wait_target_disable failed
-[    0.391113] omap_hwmod: l4_wkup: _wait_target_disable failed
-[    0.399536] omap_hwmod: dma_system: _wait_target_disable failed
-[    0.408325] omap_hwmod: dss_core: _wait_target_disable failed
-[    0.416839] omap_hwmod: dss_dispc: _wait_target_disable failed
-[    0.425445] omap_hwmod: dss_dsi1: _wait_target_disable failed
-[    0.433990] omap_hwmod: dss_dsi2: _wait_target_disable failed
-[    0.442504] omap_hwmod: dss_hdmi: _wait_target_disable failed
-[    0.451019] omap_hwmod: dss_rfbi: _wait_target_disable failed
-[    0.459564] omap_hwmod: dss_venc: _wait_target_disable failed
-[    0.489471] omap_hwmod: mailbox: _wait_target_disable failed
-[    0.505920] omap_hwmod: spinlock: _wait_target_disable failed
-
-Note: For such module, the state is managed automatically by HW according
-to clock domain transition. It is then not possible to wait for idle even
-later in the _idle function since the status will change at clock domain
-boundary.
-
-Signed-off-by: Benoit Cousson <[email protected]>
-Cc: Paul Walmsley <[email protected]>
-Cc: Rajendra Nayak <[email protected]>
-[[email protected]: renamed fns to indicate that they are OMAP4-only; moved
- _wait_target_disable() into _disable_module(), removing duplicate code]
-Signed-off-by: Paul Walmsley <[email protected]>
-Signed-off-by: Tony Lindgren <[email protected]>
----
-
---- a/arch/arm/mach-omap2/omap_hwmod.c
-+++ b/arch/arm/mach-omap2/omap_hwmod.c
-@@ -706,27 +706,65 @@ static void _enable_module(struct omap_h
- }
- 
- /**
-- * _disable_module - enable CLKCTRL modulemode on OMAP4
-+ * _omap4_wait_target_disable - wait for a module to be disabled on OMAP4
-+ * @oh: struct omap_hwmod *
-+ *
-+ * Wait for a module @oh to enter slave idle.  Returns 0 if the module
-+ * does not have an IDLEST bit or if the module successfully enters
-+ * slave idle; otherwise, pass along the return value of the
-+ * appropriate *_cm*_wait_module_idle() function.
-+ */
-+static int _omap4_wait_target_disable(struct omap_hwmod *oh)
-+{
-+	if (!cpu_is_omap44xx())
-+		return 0;
-+
-+	if (!oh)
-+		return -EINVAL;
-+
-+	if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
-+		return 0;
-+
-+	if (oh->flags & HWMOD_NO_IDLEST)
-+		return 0;
-+
-+	return omap4_cminst_wait_module_idle(oh->clkdm->prcm_partition,
-+					     oh->clkdm->cm_inst,
-+					     oh->clkdm->clkdm_offs,
-+					     oh->prcm.omap4.clkctrl_offs);
-+}
-+
-+/**
-+ * _omap4_disable_module - enable CLKCTRL modulemode on OMAP4
-  * @oh: struct omap_hwmod *
-  *
-  * Disable the PRCM module mode related to the hwmod @oh.
-- * No return value.
-+ * Return EINVAL if the modulemode is not supported and 0 in case of success.
-  */
--static void _disable_module(struct omap_hwmod *oh)
-+static int _omap4_disable_module(struct omap_hwmod *oh)
- {
-+	int v;
-+
- 	/* The module mode does not exist prior OMAP4 */
--	if (cpu_is_omap24xx() || cpu_is_omap34xx())
--		return;
-+	if (!cpu_is_omap44xx())
-+		return -EINVAL;
- 
- 	if (!oh->clkdm || !oh->prcm.omap4.modulemode)
--		return;
-+		return -EINVAL;
- 
--	pr_debug("omap_hwmod: %s: _disable_module\n", oh->name);
-+	pr_debug("omap_hwmod: %s: %s\n", oh->name, __func__);
- 
- 	omap4_cminst_module_disable(oh->clkdm->prcm_partition,
- 				    oh->clkdm->cm_inst,
- 				    oh->clkdm->clkdm_offs,
- 				    oh->prcm.omap4.clkctrl_offs);
-+
-+	v = _omap4_wait_target_disable(oh);
-+	if (v)
-+		pr_warn("omap_hwmod: %s: _wait_target_disable failed\n",
-+			oh->name);
-+
-+	return 0;
- }
- 
- /**
-@@ -1153,36 +1191,6 @@ static int _wait_target_ready(struct oma
- }
- 
- /**
-- * _wait_target_disable - wait for a module to be disabled
-- * @oh: struct omap_hwmod *
-- *
-- * Wait for a module @oh to enter slave idle.  Returns 0 if the module
-- * does not have an IDLEST bit or if the module successfully enters
-- * slave idle; otherwise, pass along the return value of the
-- * appropriate *_cm*_wait_module_idle() function.
-- */
--static int _wait_target_disable(struct omap_hwmod *oh)
--{
--	/* TODO: For now just handle OMAP4+ */
--	if (cpu_is_omap24xx() || cpu_is_omap34xx())
--		return 0;
--
--	if (!oh)
--		return -EINVAL;
--
--	if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
--		return 0;
--
--	if (oh->flags & HWMOD_NO_IDLEST)
--		return 0;
--
--	return omap4_cminst_wait_module_idle(oh->clkdm->prcm_partition,
--					     oh->clkdm->cm_inst,
--					     oh->clkdm->clkdm_offs,
--					     oh->prcm.omap4.clkctrl_offs);
--}
--
--/**
-  * _lookup_hardreset - fill register bit info for this hwmod/reset line
-  * @oh: struct omap_hwmod *
-  * @name: name of the reset line in the context of this hwmod
-@@ -1524,8 +1532,6 @@ static int _enable(struct omap_hwmod *oh
-  */
- static int _idle(struct omap_hwmod *oh)
- {
--	int ret;
--
- 	pr_debug("omap_hwmod: %s: idling\n", oh->name);
- 
- 	if (oh->_state != _HWMOD_STATE_ENABLED) {
-@@ -1537,11 +1543,9 @@ static int _idle(struct omap_hwmod *oh)
- 	if (oh->class->sysc)
- 		_idle_sysc(oh);
- 	_del_initiator_dep(oh, mpu_oh);
--	_disable_module(oh);
--	ret = _wait_target_disable(oh);
--	if (ret)
--		pr_warn("omap_hwmod: %s: _wait_target_disable failed\n",
--			oh->name);
-+
-+	_omap4_disable_module(oh);
-+
- 	/*
- 	 * The module must be in idle mode before disabling any parents
- 	 * clocks. Otherwise, the parent clock might be disabled before
-@@ -1642,11 +1646,7 @@ static int _shutdown(struct omap_hwmod *
- 	if (oh->_state == _HWMOD_STATE_ENABLED) {
- 		_del_initiator_dep(oh, mpu_oh);
- 		/* XXX what about the other system initiators here? dma, dsp */
--		_disable_module(oh);
--		ret = _wait_target_disable(oh);
--		if (ret)
--			pr_warn("omap_hwmod: %s: _wait_target_disable failed\n",
--				oh->name);
-+		_omap4_disable_module(oh);
- 		_disable_clocks(oh);
- 		if (oh->clkdm)
- 			clkdm_hwmod_disable(oh->clkdm, oh);

target/linux/omap4/patches/001-omap4_pandaboard-wlan_fix.patch

@@ -1,6 +1,6 @@
 --- a/arch/arm/mach-omap2/twl-common.c
 +++ b/arch/arm/mach-omap2/twl-common.c
-@@ -281,6 +281,7 @@ static struct regulator_init_data omap4_
+@@ -280,6 +280,7 @@ static struct regulator_init_data omap4_
  static struct regulator_init_data omap4_clk32kg_idata = {
  	.constraints = {
  		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,

target/linux/omap4/patches/002-omap4_pandaboard_i2c.patch

@@ -1,45 +0,0 @@
---- a/arch/arm/mach-omap2/id.c
-+++ b/arch/arm/mach-omap2/id.c
-@@ -389,8 +389,10 @@ static void __init omap4_check_revision(
- 			omap_revision = OMAP4430_REV_ES2_1;
- 			break;
- 		case 4:
--		default:
- 			omap_revision = OMAP4430_REV_ES2_2;
-+		case 6:
-+		default:
-+			omap_revision = OMAP4430_REV_ES2_3;
- 		}
- 		break;
- 	case 0xb94e:
-@@ -403,7 +405,7 @@ static void __init omap4_check_revision(
- 		break;
- 	default:
- 		/* Unknown default to latest silicon rev as default */
--		omap_revision = OMAP4430_REV_ES2_2;
-+		omap_revision = OMAP4430_REV_ES2_3;
- 	}
- 
- 	pr_info("OMAP%04x ES%d.%d\n", omap_rev() >> 16,
---- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
-+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
-@@ -2257,7 +2257,8 @@ static struct omap_hwmod_class omap44xx_
- };
- 
- static struct omap_i2c_dev_attr i2c_dev_attr = {
--	.flags	= OMAP_I2C_FLAG_BUS_SHIFT_NONE,
-+	.flags	= OMAP_I2C_FLAG_BUS_SHIFT_NONE |
-+			OMAP_I2C_FLAG_RESET_REGS_POSTIDLE,
- };
- 
- /* i2c1 */
---- a/arch/arm/plat-omap/include/plat/cpu.h
-+++ b/arch/arm/plat-omap/include/plat/cpu.h
-@@ -391,6 +391,7 @@ IS_OMAP_TYPE(3517, 0x3517)
- #define OMAP4430_REV_ES2_0	(OMAP443X_CLASS | (0x20 << 8))
- #define OMAP4430_REV_ES2_1	(OMAP443X_CLASS | (0x21 << 8))
- #define OMAP4430_REV_ES2_2	(OMAP443X_CLASS | (0x22 << 8))
-+#define OMAP4430_REV_ES2_3	(OMAP443X_CLASS | (0x23 << 8))
- 
- #define OMAP446X_CLASS		0x44600044
- #define OMAP4460_REV_ES1_0	(OMAP446X_CLASS | (0x10 << 8))