mvebu: use ucidef to set up MAC address

Use ucidef to set up MAC address instead of preinit script

Signed-off-by: DENG Qingfang <[email protected]>

target/linux/mvebu/cortexa9/base-files/etc/board.d/02_network

@@ -4,49 +4,86 @@
 # Copyright (C) 2016 LEDE-Project.org
 #
 
+. /lib/functions.sh
 . /lib/functions/uci-defaults.sh
+. /lib/functions/system.sh
 
-board_config_update
+mvebu_setup_interfaces()
+{
+	local board="$1"
 
-board=$(board_name)
+	case "$board" in
+	cznic,turris-omnia)
+		ucidef_set_interfaces_lan_wan "lan0 lan1 lan2 lan3 lan4" "eth2"
+		;;
+	linksys,caiman|\
+	linksys,cobra|\
+	linksys,mamba|\
+	linksys,rango|\
+	linksys,shelby|\
+	linksys,venom)
+		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
+		;;
+	marvell,a385-db-ap)
+		ucidef_set_interfaces_lan_wan "eth0 eth1" "eth2"
+		;;
+	marvell,axp-gp)
+		ucidef_set_interface_lan "eth0 eth1 eth2 eth3"
+		;;
+	solidrun,clearfog-a1|\
+	solidrun,clearfog-pro-a1)
+		# eth0 is standalone ethernet
+		# eth1 is switch
+		# eth2 is SFP
+		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 lan5 lan6" "eth0 eth2"
+		;;
+	solidrun,clearfog-base-a1)
+		# eth0 is standalone ethernet
+		# eth1 is standalone ethernet
+		# eth2 is SFP
+		ucidef_set_interfaces_lan_wan "eth1" "eth0 eth2"
+		;;
+	*)
+		ucidef_set_interface_lan "eth0"
+		;;
+	esac
+}
+
+mvebu_setup_macs()
+{
+	local board="$1"
+	local lan_mac=""
+	local wan_mac=""
+	local label_mac=""
 
-case "$board" in
-cznic,turris-omnia)
-	ucidef_set_interface_lan "lan0 lan1 lan2 lan3 lan4"
-	ucidef_set_interface_wan "eth2"
-	;;
-linksys,caiman|\
-linksys,cobra|\
-linksys,mamba|\
-linksys,rango|\
-linksys,shelby|\
-linksys,venom)
-	ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
-	;;
-marvell,a385-db-ap)
-	ucidef_set_interfaces_lan_wan "eth0 eth1" "eth2"
-	;;
-marvell,axp-gp)
-	ucidef_set_interface_lan "eth0 eth1 eth2 eth3"
-	;;
-solidrun,clearfog-a1|\
-solidrun,clearfog-pro-a1)
-	# eth0 is standalone ethernet
-	# eth1 is switch
-	# eth2 is SFP
-	ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 lan5 lan6" "eth0 eth2"
-	;;
-solidrun,clearfog-base-a1)
-	# eth0 is standalone ethernet
-	# eth1 is standalone ethernet
-	# eth2 is SFP
-	ucidef_set_interfaces_lan_wan "eth1" "eth0 eth2"
-	;;
-*)
-	ucidef_set_interface_lan "eth0"
-	;;
-esac
+	case "$board" in
+	buffalo,ls421de)
+		lan_mac=$(mtd_get_mac_ascii u-boot-env eth1addr)
+		;;
+	linksys,caiman|\
+	linksys,cobra|\
+	linksys,rango|\
+	linksys,shelby|\
+	linksys,venom)
+		label_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
+		wan_mac=$(macaddr_setbit_la $label_mac)
+		;;
+	linksys,mamba)
+		label_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
+		lan_mac=$label_mac
+		wan_mac=$label_mac
+		;;
+	esac
 
+	[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
+	[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
+	[ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
+}
+
+board_config_update
+board=$(board_name)
+mvebu_setup_interfaces $board
+mvebu_setup_macs $board
 board_config_flush
 
 exit 0