drop 2.6.32 support (next target is 2.6.38)

SVN-Revision: 25096

target/linux/orion/patches-2.6.32/010-ignore_atag_cmdline.patch

@@ -1,11 +0,0 @@
---- a/arch/arm/kernel/setup.c
-+++ b/arch/arm/kernel/setup.c
-@@ -629,7 +629,7 @@ __tagtable(ATAG_REVISION, parse_tag_revi
- 
- static int __init parse_tag_cmdline(const struct tag *tag)
- {
--	strlcpy(default_command_line, tag->u.cmdline.cmdline, COMMAND_LINE_SIZE);
-+//	strlcpy(default_command_line, tag->u.cmdline.cmdline, COMMAND_LINE_SIZE);
- 	return 0;
- }
- 

target/linux/orion/patches-2.6.32/090-wrt350nv2_gpio_leds_buttons.patch

@@ -1,102 +0,0 @@
---- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
-+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
-@@ -15,6 +15,9 @@
- #include <linux/mtd/physmap.h>
- #include <linux/mv643xx_eth.h>
- #include <linux/ethtool.h>
-+#include <linux/leds.h>
-+#include <linux/gpio_keys.h>
-+#include <linux/input.h>
- #include <net/dsa.h>
- #include <asm/mach-types.h>
- #include <asm/gpio.h>
-@@ -24,6 +27,80 @@
- #include "common.h"
- #include "mpp.h"
- 
-+/*
-+ * LEDs attached to GPIO
-+ */
-+static struct gpio_led wrt350n_v2_led_pins[] = {
-+	{
-+		.name           = "wrt350nv2:green:power",
-+		.gpio           = 0,
-+		.active_low     = 1,
-+	}, {
-+		.name           = "wrt350nv2:green:security",
-+		.gpio           = 1,
-+		.active_low     = 1,
-+	}, {
-+		.name           = "wrt350nv2:orange:power",
-+		.gpio           = 5,
-+		.active_low     = 1,
-+	}, {
-+		.name           = "wrt350nv2:green:usb",
-+		.gpio           = 6,
-+		.active_low     = 1,
-+	}, {
-+		.name           = "wrt350nv2:green:wireless",
-+		.gpio           = 7,
-+		.active_low     = 1,
-+	},
-+};
-+
-+static struct gpio_led_platform_data wrt350n_v2_led_data = {
-+	.leds           = wrt350n_v2_led_pins,
-+	.num_leds       = ARRAY_SIZE(wrt350n_v2_led_pins),
-+};
-+
-+static struct platform_device wrt350n_v2_leds = {
-+	.name   = "leds-gpio",
-+	.id     = -1,
-+	.dev    = {
-+		.platform_data  = &wrt350n_v2_led_data,
-+	},
-+};
-+
-+/*
-+ * Buttons attached to GPIO
-+ */
-+static struct gpio_keys_button wrt350n_v2_buttons[] = {
-+        {
-+                .code           = KEY_RESTART,
-+                .gpio           = 3,
-+                .desc           = "Reset Button",
-+                .active_low     = 1,
-+        }, {
-+                .code           = KEY_WLAN,
-+                .gpio           = 2,
-+                .desc           = "WPS Button",
-+                .active_low     = 1,
-+        },
-+};
-+
-+static struct gpio_keys_platform_data wrt350n_v2_button_data = {
-+        .buttons        = wrt350n_v2_buttons,
-+        .nbuttons       = ARRAY_SIZE(wrt350n_v2_buttons),
-+};
-+
-+static struct platform_device wrt350n_v2_button_device = {
-+        .name           = "gpio-keys",
-+        .id             = -1,
-+        .num_resources  = 0,
-+        .dev            = {
-+                .platform_data  = &wrt350n_v2_button_data,
-+        },
-+};
-+
-+/*
-+ * General setup
-+ */
- static struct orion5x_mpp_mode wrt350n_v2_mpp_modes[] __initdata = {
- 	{  0, MPP_GPIO },		/* Power LED green (0=on) */
- 	{  1, MPP_GPIO },		/* Security LED (0=on) */
-@@ -140,6 +217,8 @@ static void __init wrt350n_v2_init(void)
- 	orion5x_setup_dev_boot_win(WRT350N_V2_NOR_BOOT_BASE,
- 				   WRT350N_V2_NOR_BOOT_SIZE);
- 	platform_device_register(&wrt350n_v2_nor_flash);
-+	platform_device_register(&wrt350n_v2_button_device);
-+	platform_device_register(&wrt350n_v2_leds);
- }
- 
- static int __init wrt350n_v2_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)

target/linux/orion/patches-2.6.32/100-wrt350nv2_openwrt_partition_map.patch

@@ -1,32 +0,0 @@
---- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
-+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
-@@ -135,11 +135,11 @@ static struct mtd_partition wrt350n_v2_n
- 	{
- 		.name		= "kernel",
- 		.offset		= 0x00000000,
--		.size		= 0x00760000,
-+		.size		= 0x00100000,	// change to kernel mtd size here (1/3)
- 	}, {
- 		.name		= "rootfs",
--		.offset		= 0x001a0000,
--		.size		= 0x005c0000,
-+		.offset		= 0x00100000,	// change to kernel mtd size here (2/3)
-+		.size		= 0x00650000,	// adopt to kernel mtd size here (3/3) = 0x00750000 - <kernel mtd size>
- 	}, {
- 		.name		= "lang",
- 		.offset		= 0x00760000,
-@@ -152,6 +152,14 @@ static struct mtd_partition wrt350n_v2_n
- 		.name		= "u-boot",
- 		.offset		= 0x007c0000,
- 		.size		= 0x00040000,
-+	}, {
-+		.name		= "eRcOmM_do_not_touch",
-+		.offset		= 0x00750000,
-+		.size		= 0x00010000,	// erasesize
-+	}, {
-+		.name		= "image",	// for sysupgrade
-+		.offset		= 0x00000000,
-+		.size		= 0x00750000,
- 	},
- };
- 

target/linux/orion/patches-2.6.32/101-wnr854t_partition_map.patch

@@ -1,13 +0,0 @@
---- a/arch/arm/mach-orion5x/wnr854t-setup.c
-+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
-@@ -67,6 +67,10 @@ static struct mtd_partition wnr854t_nor_
- 		.name		= "uboot",
- 		.offset		= 0x00760000,
- 		.size		= 0x00040000,
-+	}, {
-+		.name		= "image",	// for sysupgrade
-+		.offset		= 0x00000000,
-+		.size		= 0x00760000,
- 	},
- };
- 

target/linux/orion/patches-2.6.32/200-dt2_board_support.patch

@@ -1,23 +0,0 @@
---- a/arch/arm/mach-orion5x/Kconfig
-+++ b/arch/arm/mach-orion5x/Kconfig
-@@ -16,6 +16,13 @@ config MACH_RD88F5182
- 	  Say 'Y' here if you want your kernel to support the
- 	  Marvell Orion-NAS (88F5182) RD2
- 
-+config MACH_DT2
-+	bool "Freecom DataTank Gateway"
-+	select I2C_BOARDINFO
-+	help
-+	  Say 'Y' here if you want your kernel to support the
-+	  Freecom DataTank Gateway
-+
- config MACH_KUROBOX_PRO
- 	bool "KuroBox Pro"
- 	select I2C_BOARDINFO
---- a/arch/arm/mach-orion5x/Makefile
-+++ b/arch/arm/mach-orion5x/Makefile
-@@ -20,3 +20,4 @@ obj-$(CONFIG_MACH_WNR854T)	+= wnr854t-se
- obj-$(CONFIG_MACH_RD88F5181L_GE)	+= rd88f5181l-ge-setup.o
- obj-$(CONFIG_MACH_RD88F5181L_FXO)	+= rd88f5181l-fxo-setup.o
- obj-$(CONFIG_MACH_RD88F6183AP_GE)	+= rd88f6183ap-ge-setup.o
-+obj-$(CONFIG_MACH_DT2)		+= dt2-setup.o

target/linux/orion/patches-2.6.32/300-skb_cb_align.patch

@@ -1,11 +0,0 @@
---- a/include/linux/skbuff.h
-+++ b/include/linux/skbuff.h
-@@ -332,7 +332,7 @@ struct sk_buff {
- 	 * want to keep them across layers you have to do a skb_clone()
- 	 * first. This is owned by whoever has the skb queued ATM.
- 	 */
--	char			cb[48];
-+	char			cb[48] __attribute__((aligned(8)));
- #if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
- 	void			*cb_next;
- #endif