ipq807x: add support for Zbtlink ZBT-Z800AX

Hardware specifications:
  SoC: Qualcomm IPQ8072A
  RAM: 1GB of DDR4 600MHz
  Flash1: Winbond W25Q64DW 8MB
  Flash2: MX30UF2G28AD 256MB
  WiFi1: QCN5024 2.4GHz AX 4x4
  WiFi2: QCN5054 5GHz AX 4x4
  Ethernet: 5x 1G RJ45 port
  USB: 2x USB 3.0 (1x M.2)
  Button: Reset, WPS

Flash instructions:
  Upload factory.bin in stock firmware's
  upgrade page, do not preserve settings.

Signed-off-by: Chukun Pan <[email protected]>

package/firmware/ipq-wifi/Makefile

@@ -52,6 +52,7 @@ ALLWIFIBOARDS:= \
 	yyets_le1 \
 	yuncore_ax880 \
 	yuncore_fap650 \
+	zbtlink_zbt-z800ax \
 	zte_mf269 \
 	zte_mf287 \
 	zte_mf287plus \
@@ -170,6 +171,7 @@ $(eval $(call generate-ipq-wifi-package,xiaomi_ax9000,Xiaomi AX9000))
 $(eval $(call generate-ipq-wifi-package,yyets_le1,YYeTs LE1))
 $(eval $(call generate-ipq-wifi-package,yuncore_ax880,Yuncore AX880))
 $(eval $(call generate-ipq-wifi-package,yuncore_fap650,Yuncore FAP650))
+$(eval $(call generate-ipq-wifi-package,zbtlink_zbt-z800ax,Zbtlink ZBT-Z800AX))
 $(eval $(call generate-ipq-wifi-package,zte_mf269,ZTE MF269))
 $(eval $(call generate-ipq-wifi-package,zte_mf287,ZTE MF287))
 $(eval $(call generate-ipq-wifi-package,zte_mf287plus,ZTE MF287Plus))

target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-zbt-z800ax.dts

@@ -0,0 +1,454 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+
+#include "ipq8074.dtsi"
+#include "ipq8074-hk-cpu.dtsi"
+#include "ipq8074-ess.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Zbtlink ZBT-Z800AX";
+	compatible = "zbtlink,zbt-z800ax", "qcom,ipq8074";
+
+	aliases {
+		led-boot = &led_net;
+		led-failsafe = &led_net;
+		led-upgrade = &led_net;
+		serial0 = &blsp1_uart5;
+		/*
+		 * Aliases as required by u-boot
+		 * to patch MAC addresses
+		 */
+		ethernet0 = &dp1;
+		ethernet1 = &dp2;
+		ethernet2 = &dp3;
+		ethernet3 = &dp4;
+		ethernet4 = &dp5;
+		label-mac-device = &dp1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		bootargs-append = " root=/dev/ubiblock0_1";
+	};
+
+	gpio-export {
+		compatible = "gpio-export";
+
+		lte-power {
+			gpio-export,name = "lte_power";
+			gpio-export,output = <1>;
+			gpios = <&tlmm 55 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
+		};
+
+		wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&tlmm 46 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_net: net {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WAN_ONLINE;
+			gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
+		};
+
+		module {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_MOBILE;
+			gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>;
+		};
+
+		wlan2g {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WLAN_2GHZ;
+			gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy1radio";
+		};
+
+		wlan5g {
+			color = <LED_COLOR_ID_GREEN>;
+			function =  LED_FUNCTION_WLAN_5GHZ;
+			gpios = <&tlmm 43 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0radio";
+		};
+	};
+};
+
+&tlmm {
+	button_pins: button-pins {
+		mux {
+			pins = "gpio34", "gpio46";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	mdio_pins: mdio-pins {
+		mdc {
+			pins = "gpio68";
+			function = "mdc";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		mdio {
+			pins = "gpio69";
+			function = "mdio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+};
+
+&blsp1_spi1 {
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	cs-select = <0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "0:sbl1";
+				reg = <0x0 0x50000>;
+				read-only;
+			};
+
+			partition@50000 {
+				label = "0:mibib";
+				reg = <0x50000 0x10000>;
+				read-only;
+			};
+
+			partition@60000 {
+				label = "0:bootconfig";
+				reg = <0x60000 0x20000>;
+				read-only;
+			};
+
+			partition@80000 {
+				label = "0:bootconfig1";
+				reg = <0x80000 0x20000>;
+				read-only;
+			};
+
+			partition@a0000 {
+				label = "0:qsee";
+				reg = <0xa0000 0x180000>;
+				read-only;
+			};
+
+			partition@220000 {
+				label = "0:qsee_1";
+				reg = <0x220000 0x180000>;
+				read-only;
+			};
+
+			partition@3a0000 {
+				label = "0:devcfg";
+				reg = <0x3a0000 0x10000>;
+				read-only;
+			};
+
+			partition@3b0000 {
+				label = "0:devcfg_1";
+				reg = <0x3b0000 0x10000>;
+				read-only;
+			};
+
+			partition@3c0000 {
+				label = "0:apdp";
+				reg = <0x3c0000 0x10000>;
+				read-only;
+			};
+
+			partition@3d0000 {
+				label = "0:apdp_1";
+				reg = <0x3d0000 0x10000>;
+				read-only;
+			};
+
+			partition@3e0000 {
+				label = "0:rpm";
+				reg = <0x3e0000 0x40000>;
+				read-only;
+			};
+
+			partition@420000 {
+				label = "0:rpm_1";
+				reg = <0x420000 0x40000>;
+				read-only;
+			};
+
+			partition@460000 {
+				label = "0:cdt";
+				reg = <0x460000 0x10000>;
+				read-only;
+			};
+
+			partition@470000 {
+				label = "0:cdt_1";
+				reg = <0x470000 0x10000>;
+				read-only;
+			};
+
+			partition@480000 {
+				label = "0:appsblenv";
+				reg = <0x480000 0x10000>;
+			};
+
+			partition@490000 {
+				label = "0:appsbl";
+				reg = <0x490000 0xa0000>;
+				read-only;
+			};
+
+			partition@530000 {
+				label = "0:appsbl_1";
+				reg = <0x530000 0xa0000>;
+				read-only;
+			};
+
+			partition@5d0000 {
+				label = "0:art";
+				reg = <0x5d0000 0x40000>;
+				read-only;
+			};
+
+			partition@610000 {
+				label = "0:ethphyfw";
+				reg = <0x610000 0x80000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&blsp1_uart5 {
+	status = "okay";
+};
+
+&cryptobam {
+	status = "okay";
+};
+
+&crypto {
+	status = "okay";
+};
+
+&prng {
+	status = "okay";
+};
+
+&qpic_bam {
+	status = "okay";
+};
+
+&qpic_nand {
+	status = "okay";
+
+	partitions {
+		status = "disabled";
+	};
+
+	nand@0 {
+		reg = <0>;
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+		nand-bus-width = <8>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "rootfs";
+				reg = <0x0000000 0x3400000>;
+			};
+
+			partition@3400000 {
+				label = "0:wififw";
+				reg = <0x3400000 0x0800000>;
+				read-only;
+			};
+
+			partition@3c00000 {
+				label = "rootfs_1";
+				reg = <0x3c00000 0x3400000>;
+			};
+
+			partition@7000000 {
+				label = "0:wififw_1";
+				reg = <0x7000000 0x0800000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&qusb_phy_0 {
+	status = "okay";
+};
+
+&qusb_phy_1 {
+	status = "okay";
+};
+
+&ssphy_0 {
+	status = "okay";
+};
+
+&ssphy_1 {
+	status = "okay";
+};
+
+&usb_0 {
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+	reset-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
+
+	ethernet-phy-package@0 {
+		compatible = "qcom,qca8075-package";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+
+		qca8075_0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+
+		qca8075_1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+		};
+
+		qca8075_2: ethernet-phy@2 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <2>;
+		};
+
+		qca8075_3: ethernet-phy@3 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <3>;
+		};
+
+		qca8075_4: ethernet-phy@4 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <4>;
+		};
+	};
+};
+
+&switch {
+	status = "okay";
+
+	switch_lan_bmp = <(ESS_PORT1 | ESS_PORT2 | ESS_PORT3 | ESS_PORT4)>;
+	switch_wan_bmp = <ESS_PORT5>;
+	switch_mac_mode = <MAC_MODE_PSGMII>;
+
+	qcom,port_phyinfo {
+		port@1 {
+			port_id = <1>;
+			phy_address = <0>;
+		};
+		port@2 {
+			port_id = <2>;
+			phy_address = <1>;
+		};
+		port@3 {
+			port_id = <3>;
+			phy_address = <2>;
+		};
+		port@4 {
+			port_id = <4>;
+			phy_address = <3>;
+		};
+		port@5 {
+			port_id = <5>;
+			phy_address = <4>;
+		};
+	};
+};
+
+&edma {
+	status = "okay";
+};
+
+&dp1 {
+	status = "okay";
+	phy-handle = <&qca8075_0>;
+	label = "lan1";
+};
+
+&dp2 {
+	status = "okay";
+	phy-handle = <&qca8075_1>;
+	label = "lan2";
+};
+
+&dp3 {
+	status = "okay";
+	phy-handle = <&qca8075_2>;
+	label = "lan3";
+};
+
+&dp4 {
+	status = "okay";
+	phy-handle = <&qca8075_3>;
+	label = "lan4";
+};
+
+&dp5 {
+	status = "okay";
+	phy-handle = <&qca8075_4>;
+	label = "wan";
+};
+
+&wifi {
+	status = "okay";
+
+	qcom,ath11k-calibration-variant = "ZBT-Z800AX";
+};

target/linux/qualcommax/image/ipq807x.mk

@@ -299,6 +299,21 @@ define Device/yuncore_ax880
 endef
 TARGET_DEVICES += yuncore_ax880
 
+define Device/zbtlink_zbt-z800ax
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := Zbtlink
+	DEVICE_MODEL := ZBT-Z800AX
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	DEVICE_DTS_CONFIG := config@hk09
+	SOC := ipq8072
+	DEVICE_PACKAGES := ipq-wifi-zbtlink_zbt-z800ax
+	IMAGES += factory.bin
+	IMAGE/factory.bin := append-ubi | qsdk-ipq-factory-nand
+endef
+TARGET_DEVICES += zbtlink_zbt-z800ax
+
 define Device/zte_mf269
 	$(call Device/FitImage)
 	$(call Device/UbiFit)

target/linux/qualcommax/ipq807x/base-files/etc/board.d/01_leds

@@ -62,6 +62,9 @@ yuncore,ax880)
 	ucidef_set_led_netdev "wan-port-link" "WAN-PORT-LINK" "90000.mdio-1:18:green:wan" "wan" "tx rx link_10 link_100 link_1000 link_2500"
 	ucidef_set_led_netdev "lan-port-link" "LAN-PORT-LINK" "90000.mdio-1:1c:green:lan" "lan" "tx rx link_10 link_100 link_1000 link_2500"
 	;;
+zbtlink,zbt-z800ax)
+	ucidef_set_led_netdev "internet" "Internet" "green:wan-online" "wan"
+	;;
 esac
 
 board_config_flush

target/linux/qualcommax/ipq807x/base-files/etc/board.d/02_network

@@ -15,7 +15,8 @@ ipq807x_setup_interfaces()
 	buffalo,wxr-5950ax12|\
 	dynalink,dl-wrx36|\
 	linksys,mx5300|\
-	xiaomi,ax9000)
+	xiaomi,ax9000|\
+	zbtlink,zbt-z800ax)
 		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
 		;;
 	cmcc,rm2-6)

target/linux/qualcommax/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata

@@ -28,6 +28,7 @@ case "$FIRMWARE" in
 	xiaomi,ax3600|\
 	xiaomi,ax9000|\
 	yuncore,ax880|\
+	zbtlink,zbt-z800ax|\
 	zte,mf269|\
 	zyxel,nbg7815)
 		caldata_extract "0:art" 0x1000 0x20000

target/linux/qualcommax/ipq807x/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac

@@ -30,4 +30,8 @@ case "$board" in
 		[ "$PHYNBR" = "1" ] && macaddr_add $label_mac 1 > /sys${DEVPATH}/macaddress
 		[ "$PHYNBR" = "2" ] && macaddr_add $label_mac 3 > /sys${DEVPATH}/macaddress
 		;;
+	zbtlink,zbt-z800ax)
+		[ "$PHYNBR" = "0" ] && macaddr_add $(get_mac_label) -1 > /sys${DEVPATH}/macaddress
+		[ "$PHYNBR" = "1" ] && macaddr_add $(get_mac_label) -2 > /sys${DEVPATH}/macaddress
+		;;
 esac

target/linux/qualcommax/ipq807x/base-files/lib/upgrade/platform.sh

@@ -51,7 +51,8 @@ platform_do_upgrade() {
 	netgear,rax120v2|\
 	netgear,wax218|\
 	netgear,wax620|\
-	netgear,wax630)
+	netgear,wax630|\
+	zbtlink,zbt-z800ax)
 		nand_do_upgrade "$1"
 		;;
 	buffalo,wxr-5950ax12)