mvebu: drop redundant label with new LED color/function format

Drop redundant label with new LED color/function format declared.
This was needed previously when the new format wasn't supported by
leds.sh functions script. Now that is supported this property
can be removed in favor of the new format.

Signed-off-by: Christian Marangi <[email protected]>

target/linux/mvebu/files/arch/arm/boot/dts/armada-370-buffalo-ls220de.dts

@@ -134,7 +134,6 @@
 		};
 
 		led_power: power_white {
-			label = "white:power";
 			function = LED_FUNCTION_POWER;
 			color = <LED_COLOR_ID_WHITE>;
 			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
@@ -142,21 +141,18 @@
 		};
 
 		led_failsafe: power_red {
-			label = "red:power";
 			function = LED_FUNCTION_POWER;
 			color = <LED_COLOR_ID_RED>;
 			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
 		};
 
 		led_upgrade: power_orange {
-			label = "amber:power";
 			function = LED_FUNCTION_POWER;
 			color = <LED_COLOR_ID_AMBER>;
 			gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
 		};
 
 		led_boot: indicator_white {
-			label = "white:indicator";
 			function = LED_FUNCTION_INDICATOR;
 			color = <LED_COLOR_ID_WHITE>;
 			gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;

target/linux/mvebu/files/arch/arm/boot/dts/armada-370-c200-v2.dts

@@ -178,7 +178,6 @@
 		};
 
 		led_status_red: led-10 {
-			label = "red:status";
 			function = LED_FUNCTION_STATUS;
 			color = <LED_COLOR_ID_RED>;
 			gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
@@ -193,7 +192,6 @@
 		};
 
 		led_status_green: led-12 {
-			label = "green:status";
 			function = LED_FUNCTION_STATUS;
 			color = <LED_COLOR_ID_GREEN>;
 			gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;

target/linux/mvebu/files/arch/arm/boot/dts/armada-380-iij-sa-w2.dts

@@ -66,71 +66,60 @@
 		pinctrl-0 = <&pmx_leds_pins>;
 
 		led-0 {
-			label = "green:wlan5g";
 			gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
 			color = <LED_COLOR_ID_GREEN>;
 			linux,default-trigger = "phy0tpt";
 		};
 
 		led-1 {
-			label = "red:wlan5g";
 			gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
 			color = <LED_COLOR_ID_RED>;
 		};
 
 		led-2 {
-			label = "green:status";
 			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
 			color = <LED_COLOR_ID_GREEN>;
 			function = LED_FUNCTION_STATUS;
 		};
 
 		led-3 {
-			label = "red:status";
 			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
 			color = <LED_COLOR_ID_RED>;
 			function = LED_FUNCTION_STATUS;
 		};
 
 		led-4 {
-			label = "green:mobile";
 			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
 			color = <LED_COLOR_ID_GREEN>;
 		};
 
 		led-5 {
-			label = "red:mobile";
 			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
 			color = <LED_COLOR_ID_RED>;
 		};
 
 		led-6 {
-			label = "green:wlan2g";
 			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
 			color = <LED_COLOR_ID_GREEN>;
 			linux,default-trigger = "phy1tpt";
 		};
 
 		led-7 {
-			label = "red:wlan2g";
 			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
 			color = <LED_COLOR_ID_RED>;
 		};
 
 		led_power_green: led-8 {
-			label = "green:power";
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 			color = <LED_COLOR_ID_GREEN>;
 		};
 
 		led_power_red: led-9 {
-			label = "red:power";
 			gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
 			color = <LED_COLOR_ID_RED>;
 		};
 
 		led-10 {
-			label = "green:usb1";
 			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
 			color = <LED_COLOR_ID_GREEN>;
 			linux,default-trigger = "usbport";
@@ -138,7 +127,6 @@
 		};
 
 		led-11 {
-			label = "green:usb0";
 			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
 			color = <LED_COLOR_ID_GREEN>;
 			linux,default-trigger = "usbport";

target/linux/mvebu/files/arch/arm/boot/dts/armada-385-fortinet-fg-30e.dts

@@ -14,14 +14,12 @@
 
 &gpio_leds {
 	led-14 {
-		label = "amber:speed_wan";
 		gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
 		color = <LED_COLOR_ID_AMBER>;
 		linux,default-trigger = "mv88e6xxx-1:00:100Mbps";
 	};
 
 	led-15 {
-		label = "green:speed_wan";
 		gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
 		color = <LED_COLOR_ID_GREEN>;
 		linux,default-trigger = "mv88e6xxx-1:00:1Gbps";

target/linux/mvebu/files/arch/arm/boot/dts/armada-385-fortinet-fg-50e.dts

@@ -14,28 +14,24 @@
 
 &gpio_leds {
 	led-14 {
-		label = "green:speed_wan1";
 		gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
 		color = <LED_COLOR_ID_GREEN>;
 		linux,default-trigger = "f1072004.mdio-mii:00:1Gbps";
 	};
 
 	led-15 {
-		label = "green:speed_wan2";
 		gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
 		color = <LED_COLOR_ID_GREEN>;
 		linux,default-trigger = "f1072004.mdio-mii:01:1Gbps";
 	};
 
 	led-16 {
-		label = "amber:speed_lan5";
 		gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
 		color = <LED_COLOR_ID_AMBER>;
 		linux,default-trigger = "mv88e6xxx-1:00:100Mbps";
 	};
 
 	led-17 {
-		label = "green:speed_lan5";
 		gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
 		color = <LED_COLOR_ID_GREEN>;
 		linux,default-trigger = "mv88e6xxx-1:00:1Gbps";

target/linux/mvebu/files/arch/arm/boot/dts/armada-385-fortinet-fg-x0e.dtsi

@@ -46,96 +46,82 @@
 		pinctrl-0 = <&pmx_gpio_leds_pins>;
 
 		led-0 {
-			label = "red:alarm";
 			gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
 			color = <LED_COLOR_ID_RED>;
 			function = LED_FUNCTION_ALARM;
 		};
 
 		led-1 {
-			label = "red:ha";
 			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
 			color = <LED_COLOR_ID_RED>;
 		};
 
 		led_status_green: led-2 {
-			label = "green:sta";
 			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
 			color = <LED_COLOR_ID_GREEN>;
 			function = LED_FUNCTION_STATUS;
 		};
 
 		led-3 {
-			label = "green:ha";
 			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
 			color = <LED_COLOR_ID_GREEN>;
 		};
 
 		led-4 {
-			label = "amber:alarm";
 			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
 			color = <LED_COLOR_ID_AMBER>;
 			function = LED_FUNCTION_ALARM;
 		};
 
 		led_status_red: led-5 {
-			label = "red:sta";
 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 			color = <LED_COLOR_ID_RED>;
 			function = LED_FUNCTION_STATUS;
 		};
 
 		led-6 {
-			label = "green:speed_lan4";
 			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
 			color = <LED_COLOR_ID_GREEN>;
 			linux,default-trigger = "mv88e6xxx-1:01:1Gbps";
 		};
 
 		led-7 {
-			label = "amber:speed_lan4";
 			gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
 			color = <LED_COLOR_ID_AMBER>;
 			linux,default-trigger = "mv88e6xxx-1:01:100Mbps";
 		};
 
 		led-8 {
-			label = "amber:speed_lan3";
 			gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
 			color = <LED_COLOR_ID_AMBER>;
 			linux,default-trigger = "mv88e6xxx-1:02:100Mbps";
 		};
 
 		led-9 {
-			label = "green:speed_lan3";
 			gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
 			color = <LED_COLOR_ID_GREEN>;
 			linux,default-trigger = "mv88e6xxx-1:02:1Gbps";
 		};
 
 		led-10 {
-			label = "green:speed_lan1";
 			gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
 			color = <LED_COLOR_ID_GREEN>;
 			linux,default-trigger = "mv88e6xxx-1:04:1Gbps";
 		};
 
 		led-11 {
-			label = "amber:speed_lan1";
 			gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
 			color = <LED_COLOR_ID_AMBER>;
 			linux,default-trigger = "mv88e6xxx-1:04:100Mbps";
 		};
 
 		led-12 {
-			label = "green:speed_lan2";
 			gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
 			color = <LED_COLOR_ID_GREEN>;
 			linux,default-trigger = "mv88e6xxx-1:03:1Gbps";
 		};
 
 		led-13 {
-			label = "amber:speed_lan2";
 			gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
 			color = <LED_COLOR_ID_AMBER>;
 			linux,default-trigger = "mv88e6xxx-1:03:100Mbps";