浏览代码

mediatek: separate dts/dtsi for Buffalo WSR series

Separate dts/dtsi from the dts of Buffalo WSR-2533DHP2 to prepare adding
suppport for WSR-3200AX4S.

Signed-off-by: INAGAKI Hiroshi <[email protected]>
INAGAKI Hiroshi 2 年之前
父节点
当前提交
9f640cae75
共有 2 个文件被更改,包括 240 次插入226 次删除
  1. 4 226
      target/linux/mediatek/dts/mt7622-buffalo-wsr-2533dhp2.dts
  2. 236 0
      target/linux/mediatek/dts/mt7622-buffalo-wsr.dtsi

+ 4 - 226
target/linux/mediatek/dts/mt7622-buffalo-wsr-2533dhp2.dts

@@ -1,120 +1,20 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /dts-v1/;
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
 
-#include "mt7622.dtsi"
-#include "mt6380.dtsi"
+#include "mt7622-buffalo-wsr.dtsi"
 
 / {
 	model = "Buffalo WSR-2533DHP2";
 	compatible = "buffalo,wsr-2533dhp2", "mediatek,mt7622";
 
 	aliases {
-		serial0 = &uart0;
-		led-boot = &power_green;
-		led-failsafe = &power_amber;
-		led-running = &power_green;
-		led-upgrade = &power_green;
 		label-mac-device = &gmac0;
 	};
 
-	chosen {
-		bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n8 swiotlb=512";
-	};
-
 	memory {
 		reg = <0 0x40000000 0 0x0F000000>;
 	};
 
-	leds {
-		compatible = "gpio-leds";
-
-		led-0 {
-			label = "amber:wireless";
-			gpios = <&pio 2 GPIO_ACTIVE_HIGH>;
-			color = <LED_COLOR_ID_AMBER>;
-			function = LED_FUNCTION_WLAN;
-		};
-
-		power_amber: led-1 {
-			label = "amber:power";
-			gpios = <&pio 3 GPIO_ACTIVE_LOW>;
-			color = <LED_COLOR_ID_AMBER>;
-			function = LED_FUNCTION_POWER;
-		};
-
-		power_green: led-2 {
-			label = "green:power";
-			gpios = <&pio 4 GPIO_ACTIVE_LOW>;
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_POWER;
-		};
-
-		led-3 {
-			label = "green:wireless";
-			gpios = <&pio 15 GPIO_ACTIVE_HIGH>;
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_WLAN;
-		};
-
-		led-4 {
-			label = "green:internet";
-			gpios = <&pio 19 GPIO_ACTIVE_HIGH>;
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_WAN;
-		};
-
-		led-5 {
-			label = "green:router";
-			gpios = <&pio 20 GPIO_ACTIVE_HIGH>;
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_INDICATOR;
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		key-reset {
-			label = "reset";
-			gpios = <&pio 0 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-
-		/* GPIO 1 and 16 are a tri-state switch button with
-		 * ROUTER / AP / WB.
-		 */
-		key-router {
-			label = "router";
-			gpios = <&pio 1 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_0>;
-			linux,input-type = <EV_SW>;
-		};
-
-		key-bridge {
-			label = "wb";
-			gpios = <&pio 16 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_1>;
-			linux,input-type = <EV_SW>;
-		};
-
-		/* GPIO 18 is a switch button with AUTO / MANUAL. */
-		key-manual {
-			label = "manual";
-			gpios = <&pio 18 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_2>;
-			linux,input-type = <EV_SW>;
-		};
-
-		key-wps {
-			label = "wps";
-			gpios = <&pio 102 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-	};
-
 	rtkgsw: rtkgsw@0 {
 		compatible = "mediatek,rtk-gsw";
 		mediatek,ethsys = <&ethsys>;
@@ -123,41 +23,7 @@
 	};
 };
 
-&cpu0 {
-	proc-supply = <&mt6380_vcpu_reg>;
-	sram-supply = <&mt6380_vm_reg>;
-};
-
-&cpu1 {
-	proc-supply = <&mt6380_vcpu_reg>;
-	sram-supply = <&mt6380_vm_reg>;
-};
-
-&pcie0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcie0_pins>;
-	status = "okay";
-};
-
-&slot0 {
-	status = "okay";
-
-	wifi@0,0 {
-		compatible = "mediatek,mt76";
-		reg = <0x0000 0 0 0 0>;
-		mediatek,mtd-eeprom = <&factory 0x5000>;
-		ieee80211-freq-limit = <5000000 6000000>;
-	};
-};
-
 &pio {
-	eth_pins: eth-pins {
-		mux {
-			function = "eth";
-			groups = "mdc_mdio", "rgmii_via_gmac2";
-		};
-	};
-
 	/* Parallel nand is shared pin with eMMC */
 	parallel_nand_pins: parallel-nand-pins {
 		mux {
@@ -176,67 +42,11 @@
 			bias-pull-up;
 		};
 	};
-
-	pcie0_pins: pcie0-pins {
-		mux {
-			function = "pcie";
-			groups = "pcie0_pad_perst",
-				 "pcie0_1_waken",
-				 "pcie0_1_clkreq";
-		};
-	};
-
-	pmic_bus_pins: pmic-bus-pins {
-		mux {
-			function = "pmic";
-			groups = "pmic_bus";
-		};
-	};
-
-	uart0_pins: uart0-pins {
-		mux {
-			function = "uart";
-			groups = "uart0_0_tx_rx" ;
-		};
-	};
-
-	watchdog_pins: watchdog-pins {
-		mux {
-			function = "watchdog";
-			groups = "watchdog";
-		};
-	};
-};
-
-&bch {
-	status = "okay";
 };
 
-&eth {
-	pinctrl-names = "default";
-	pinctrl-0 = <&eth_pins>;
-	status = "okay";
-
-	gmac0: mac@0 {
-		compatible = "mediatek,eth-mac";
-		reg = <0>;
-
-		phy-connection-type = "2500base-x";
-
-		nvmem-cells = <&macaddr_factory_4 (-1)>;
-		nvmem-cell-names = "mac-address";
-
-		fixed-link {
-			speed = <2500>;
-			full-duplex;
-			pause;
-		};
-	};
-
-	mdio: mdio-bus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
+&gmac0 {
+	nvmem-cells = <&macaddr_factory_4 (-1)>;
+	nvmem-cell-names = "mac-address";
 };
 
 &nandc {
@@ -321,35 +131,3 @@
 		};
 	};
 };
-
-&pwm {
-	status = "okay";
-};
-
-&pwrap {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pmic_bus_pins>;
-	status = "okay";
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-	status = "okay";
-};
-
-&watchdog {
-	pinctrl-names = "default";
-	pinctrl-0 = <&watchdog_pins>;
-	status = "okay";
-};
-
-&wmac {
-	status = "okay";
-
-	mediatek,mtd-eeprom = <&factory 0x0>;
-};
-
-&rtc {
-	status = "disabled";
-};

+ 236 - 0
target/linux/mediatek/dts/mt7622-buffalo-wsr.dtsi

@@ -0,0 +1,236 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+#include "mt7622.dtsi"
+#include "mt6380.dtsi"
+
+/ {
+	aliases {
+		serial0 = &uart0;
+		led-boot = &power_green;
+		led-failsafe = &power_amber;
+		led-running = &power_green;
+		led-upgrade = &power_green;
+	};
+
+	chosen {
+		bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n8 swiotlb=512";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "amber:wireless";
+			gpios = <&pio 2 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_WLAN;
+		};
+
+		power_amber: led-1 {
+			label = "amber:power";
+			gpios = <&pio 3 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_POWER;
+		};
+
+		power_green: led-2 {
+			label = "green:power";
+			gpios = <&pio 4 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_POWER;
+		};
+
+		led-3 {
+			label = "green:wireless";
+			gpios = <&pio 15 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WLAN;
+		};
+
+		led-4 {
+			label = "green:internet";
+			gpios = <&pio 19 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WAN;
+		};
+
+		led-5 {
+			label = "green:router";
+			gpios = <&pio 20 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		key-reset {
+			label = "reset";
+			gpios = <&pio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		/* GPIO 1 and 16 are a tri-state switch button with
+		 * ROUTER / AP / WB.
+		 */
+		key-router {
+			label = "router";
+			gpios = <&pio 1 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+			linux,input-type = <EV_SW>;
+		};
+
+		key-bridge {
+			label = "wb";
+			gpios = <&pio 16 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_1>;
+			linux,input-type = <EV_SW>;
+		};
+
+		/* GPIO 18 is a switch button with AUTO / MANUAL. */
+		key-manual {
+			label = "manual";
+			gpios = <&pio 18 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_2>;
+			linux,input-type = <EV_SW>;
+		};
+
+		key-wps {
+			label = "wps";
+			gpios = <&pio 102 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+};
+
+&cpu0 {
+	proc-supply = <&mt6380_vcpu_reg>;
+	sram-supply = <&mt6380_vm_reg>;
+};
+
+&cpu1 {
+	proc-supply = <&mt6380_vcpu_reg>;
+	sram-supply = <&mt6380_vm_reg>;
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie0_pins>;
+	status = "okay";
+};
+
+&slot0 {
+	status = "okay";
+
+	wifi@0,0 {
+		compatible = "mediatek,mt76";
+		reg = <0x0000 0 0 0 0>;
+		mediatek,mtd-eeprom = <&factory 0x5000>;
+		ieee80211-freq-limit = <5000000 6000000>;
+	};
+};
+
+&pio {
+	eth_pins: eth-pins {
+		mux {
+			function = "eth";
+			groups = "mdc_mdio", "rgmii_via_gmac2";
+		};
+	};
+
+	pcie0_pins: pcie0-pins {
+		mux {
+			function = "pcie";
+			groups = "pcie0_pad_perst",
+				 "pcie0_1_waken",
+				 "pcie0_1_clkreq";
+		};
+	};
+
+	pmic_bus_pins: pmic-bus-pins {
+		mux {
+			function = "pmic";
+			groups = "pmic_bus";
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		mux {
+			function = "uart";
+			groups = "uart0_0_tx_rx" ;
+		};
+	};
+
+	watchdog_pins: watchdog-pins {
+		mux {
+			function = "watchdog";
+			groups = "watchdog";
+		};
+	};
+};
+
+&eth {
+	pinctrl-names = "default";
+	pinctrl-0 = <&eth_pins>;
+	status = "okay";
+
+	gmac0: mac@0 {
+		compatible = "mediatek,eth-mac";
+		reg = <0>;
+
+		phy-connection-type = "2500base-x";
+
+		fixed-link {
+			speed = <2500>;
+			full-duplex;
+			pause;
+		};
+	};
+
+	mdio: mdio-bus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&bch {
+	status = "okay";
+};
+
+&pwm {
+	status = "okay";
+};
+
+&pwrap {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_bus_pins>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&watchdog {
+	pinctrl-names = "default";
+	pinctrl-0 = <&watchdog_pins>;
+	status = "okay";
+};
+
+&wmac {
+	status = "okay";
+
+	mediatek,mtd-eeprom = <&factory 0x0>;
+};
+
+&rtc {
+	status = "disabled";
+};