|
|
@@ -0,0 +1,153 @@
|
|
|
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
+/dts-v1/;
|
|
|
+
|
|
|
+#include <dt-bindings/gpio/gpio.h>
|
|
|
+#include <dt-bindings/input/input.h>
|
|
|
+
|
|
|
+#include "ar9344.dtsi"
|
|
|
+
|
|
|
+/ {
|
|
|
+ compatible = "compex,wpj344-16m", "qca,ar9344";
|
|
|
+ model = "Compex WPJ344 (16MB flash)";
|
|
|
+
|
|
|
+ aliases {
|
|
|
+ label-mac-device = ð0;
|
|
|
+ led-boot = &led_status;
|
|
|
+ led-failsafe = &led_status;
|
|
|
+ led-running = &led_status;
|
|
|
+ led-upgrade = &led_status;
|
|
|
+ };
|
|
|
+
|
|
|
+ leds {
|
|
|
+ compatible = "gpio-leds";
|
|
|
+
|
|
|
+ led_status: status {
|
|
|
+ label = "wpj344:green:status";
|
|
|
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
|
|
|
+ };
|
|
|
+
|
|
|
+ sig1 {
|
|
|
+ label = "wpj344:red:sig1";
|
|
|
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
|
|
|
+ };
|
|
|
+
|
|
|
+ sig2 {
|
|
|
+ label = "wpj344:yellow:sig2";
|
|
|
+ gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
|
|
|
+ };
|
|
|
+
|
|
|
+ sig3 {
|
|
|
+ label = "wpj344:green:sig3";
|
|
|
+ gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
|
|
|
+ };
|
|
|
+
|
|
|
+ sig4 {
|
|
|
+ label = "wpj344:green:sig4";
|
|
|
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ keys {
|
|
|
+ compatible = "gpio-keys";
|
|
|
+
|
|
|
+ reset {
|
|
|
+ linux,code = <KEY_RESTART>;
|
|
|
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
|
|
|
+ debounce-interval = <60>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&ref {
|
|
|
+ clock-frequency = <40000000>;
|
|
|
+};
|
|
|
+
|
|
|
+&uart {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&spi {
|
|
|
+ status = "okay";
|
|
|
+
|
|
|
+ num-cs = <1>;
|
|
|
+
|
|
|
+ flash@0 {
|
|
|
+ compatible = "jedec,spi-nor";
|
|
|
+ reg = <0>;
|
|
|
+ spi-max-frequency = <25000000>;
|
|
|
+
|
|
|
+ partitions {
|
|
|
+ compatible = "fixed-partitions";
|
|
|
+ #address-cells = <1>;
|
|
|
+ #size-cells = <1>;
|
|
|
+
|
|
|
+ uboot: partition@0 {
|
|
|
+ label = "u-boot";
|
|
|
+ reg = <0x000000 0x030000>;
|
|
|
+ read-only;
|
|
|
+ };
|
|
|
+
|
|
|
+ partition@30000 {
|
|
|
+ label = "firmware";
|
|
|
+ reg = <0x030000 0xfc0000>;
|
|
|
+ compatible = "denx,uimage";
|
|
|
+ };
|
|
|
+
|
|
|
+ art: partition@ff0000 {
|
|
|
+ label = "art";
|
|
|
+ reg = <0xff0000 0x010000>;
|
|
|
+ read-only;
|
|
|
+ };
|
|
|
+ };
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&usb {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&usb_phy {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&pcie {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&wmac {
|
|
|
+ status = "okay";
|
|
|
+
|
|
|
+ mtd-cal-data = <&art 0x1000>;
|
|
|
+};
|
|
|
+
|
|
|
+&mdio0 {
|
|
|
+ status = "okay";
|
|
|
+
|
|
|
+ phy-mask = <0>;
|
|
|
+
|
|
|
+ phy0: ethernet-phy@0 {
|
|
|
+ reg = <0>;
|
|
|
+ phy-mode = "rgmii";
|
|
|
+
|
|
|
+ qca,ar8327-initvals = <
|
|
|
+ 0x04 0x07600000 /* PORT0 PAD MODE CTRL */
|
|
|
+ 0x10 0x80000080 /* POWER_ON_STRIP */
|
|
|
+ 0x50 0x00000000 /* LED_CTRL0 */
|
|
|
+ 0x54 0xc737c737 /* LED_CTRL1 */
|
|
|
+ 0x58 0x00000000 /* LED_CTRL2 */
|
|
|
+ 0x5c 0x00c30c00 /* LED_CTRL3 */
|
|
|
+ 0x7c 0x0000007e /* PORT0_STATUS */
|
|
|
+ >;
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+ð0 {
|
|
|
+ status = "okay";
|
|
|
+
|
|
|
+ pll-data = <0x06000000 0x00000101 0x00001616>;
|
|
|
+
|
|
|
+ mtd-mac-address = <&uboot 0x2e010>;
|
|
|
+
|
|
|
+ phy-mode = "rgmii";
|
|
|
+ phy-handle = <&phy0>;
|
|
|
+};
|