ipq806x: 6.6: rework kernel patches for new kernel

Rework kernel patches for new kernel. Mainly adaptation for patch
related to DTS and changes for the downstream div generalize patch that
now use determine_rate.

Signed-off-by: Christian Marangi <[email protected]>

target/linux/ipq806x/patches-6.6/107-10-ARM-dts-qcom-add-saw-for-l2-cache-and-kraitcc-for.patch

@@ -11,11 +11,11 @@ for the secondary mux.
 Signed-off-by: Ansuel Smith <[email protected]>
 Tested-by: Jonathan McDowell <[email protected]>
 ---
- arch/arm/boot/dts/qcom-ipq8064.dtsi | 34 +++++++++++++++++++++++++++--
+ arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi | 34 +++++++++++++++++++++++++++--
  1 file changed, 32 insertions(+), 2 deletions(-)
 
---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
+--- a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
++++ b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
 @@ -301,6 +301,12 @@
  	};
  
@@ -29,30 +29,7 @@ Tested-by: Jonathan McDowell <[email protected]>
  		cxo_board: cxo_board {
  			compatible = "fixed-clock";
  			#clock-cells = <0>;
-@@ -575,15 +581,30 @@
- 			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
- 			clock-names = "pll8_vote", "pxo";
- 			clock-output-names = "acpu_l2_aux";
-+			#clock-cells = <0>;
-+		};
-+
-+		kraitcc: clock-controller {
-+			compatible = "qcom,krait-cc-v1";
-+			clocks = <&gcc PLL9>, <&gcc PLL10>, <&gcc PLL12>,
-+				 <&acc0>, <&acc1>, <&l2cc>, <&qsb>, <&pxo_board>;
-+			clock-names = "hfpll0", "hfpll1", "hfpll_l2",
-+				      "acpu0_aux", "acpu1_aux", "acpu_l2_aux",
-+				      "qsb", "pxo";
-+			#clock-cells = <1>;
- 		};
- 
- 		acc0: clock-controller@2088000 {
- 			compatible = "qcom,kpss-acc-v1";
- 			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
-+			clock-output-names = "acpu0_aux";
-+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
-+			clock-names = "pll8_vote", "pxo";
-+			#clock-cells = <0>;
+@@ -575,7 +581,7 @@
  		};
  
  		saw0: regulator@2089000 {
@@ -61,14 +38,7 @@ Tested-by: Jonathan McDowell <[email protected]>
  			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
  			regulator;
  		};
-@@ -591,14 +612,24 @@
- 		acc1: clock-controller@2098000 {
- 			compatible = "qcom,kpss-acc-v1";
- 			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
-+			clock-output-names = "acpu1_aux";
-+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
-+			clock-names = "pll8_vote", "pxo";
-+			#clock-cells = <0>;
+@@ -591,11 +612,27 @@
  		};
  
  		saw1: regulator@2099000 {
@@ -84,6 +54,16 @@ Tested-by: Jonathan McDowell <[email protected]>
 +			regulator;
 +		};
 +
- 		nss_common: syscon@03000000 {
++		kraitcc: clock-controller {
++			compatible = "qcom,krait-cc-v1";
++			clocks = <&gcc PLL9>, <&gcc PLL10>, <&gcc PLL12>,
++				 <&acc0>, <&acc1>, <&l2cc>, <&qsb>, <&pxo_board>;
++			clock-names = "hfpll0", "hfpll1", "hfpll_l2",
++				      "acpu0_aux", "acpu1_aux", "acpu_l2_aux",
++				      "qsb", "pxo";
++			#clock-cells = <1>;
++		};
++
+ 		nss_common: syscon@3000000 {
  			compatible = "syscon";
  			reg = <0x03000000 0x0000FFFF>;

target/linux/ipq806x/patches-6.6/107-13-ARM-dts-qcom-add-opp-table-for-cpu-and-l2-for-ipq.patch

@@ -18,11 +18,11 @@ Opp-level is set based on the logic of
 Signed-off-by: Ansuel Smith <[email protected]>
 Tested-by: Jonathan McDowell <[email protected]>
 ---
- arch/arm/boot/dts/qcom-ipq8064.dtsi | 99 +++++++++++++++++++++++++++++
+ arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi | 99 +++++++++++++++++++++++++++++
  1 file changed, 99 insertions(+)
 
---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
+--- a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
++++ b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
 @@ -48,6 +48,105 @@
  		};
  	};
@@ -129,8 +129,8 @@ Tested-by: Jonathan McDowell <[email protected]>
  	thermal-zones {
  		sensor0-thermal {
  			polling-delay-passive = <0>;
---- a/arch/arm/boot/dts/qcom-ipq8065.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8065.dtsi
+--- a/arch/arm/boot/dts/qcom/qcom-ipq8065.dtsi
++++ b/arch/arm/boot/dts/qcom/qcom-ipq8065.dtsi
 @@ -6,3 +6,92 @@
  	model = "Qualcomm Technologies, Inc. IPQ8065";
  	compatible = "qcom,ipq8065", "qcom,ipq8064";
@@ -224,8 +224,8 @@ Tested-by: Jonathan McDowell <[email protected]>
 +		opp-level = <2>;
 +	};
 +};
---- a/arch/arm/boot/dts/qcom-ipq8062.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8062.dtsi
+--- a/arch/arm/boot/dts/qcom/qcom-ipq8062.dtsi
++++ b/arch/arm/boot/dts/qcom/qcom-ipq8062.dtsi
 @@ -6,3 +6,39 @@
  	model = "Qualcomm Technologies, Inc. IPQ8062";
  	compatible = "qcom,ipq8062", "qcom,ipq8064";

target/linux/ipq806x/patches-6.6/107-15-ARM-dts-qcom-add-multiple-missing-binding-for-cpu.patch

@@ -10,11 +10,11 @@ definition for ipq8064 dtsi.
 Signed-off-by: Ansuel Smith <[email protected]>
 Tested-by: Jonathan McDowell <[email protected]>
 ---
- arch/arm/boot/dts/qcom-ipq8064.dtsi | 36 +++++++++++++++++++++++++++++
+ arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi | 36 +++++++++++++++++++++++++++++
  1 file changed, 36 insertions(+)
 
---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
+--- a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
++++ b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
 @@ -30,6 +30,15 @@
  			next-level-cache = <&L2>;
  			qcom,acc = <&acc0>;
@@ -31,7 +31,7 @@ Tested-by: Jonathan McDowell <[email protected]>
  		};
  
  		cpu1: cpu@1 {
-@@ -40,11 +49,35 @@
+@@ -40,12 +49,36 @@
  			next-level-cache = <&L2>;
  			qcom,acc = <&acc1>;
  			qcom,saw = <&saw1>;
@@ -59,6 +59,7 @@ Tested-by: Jonathan McDowell <[email protected]>
  		L2: l2-cache {
  			compatible = "cache";
  			cache-level = <2>;
+			cache-unified;
 +			qcom,saw = <&saw_l2>;
 +
 +			clocks = <&kraitcc 4>;
@@ -67,8 +68,8 @@ Tested-by: Jonathan McDowell <[email protected]>
  		};
  	};
  
---- a/arch/arm/boot/dts/qcom-ipq8064-smb208.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064-smb208.dtsi
+--- a/arch/arm/boot/dts/qcom/qcom-ipq8064-smb208.dtsi
++++ b/arch/arm/boot/dts/qcom/qcom-ipq8064-smb208.dtsi
 @@ -2,6 +2,18 @@
  
  #include "qcom-ipq8064.dtsi"
@@ -88,8 +89,8 @@ Tested-by: Jonathan McDowell <[email protected]>
  &rpm {
  	smb208_regulators: regulators {
  		compatible = "qcom,rpm-smb208-regulators";
---- a/arch/arm/boot/dts/qcom-ipq8064-v2.0-smb208.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064-v2.0-smb208.dtsi
+--- a/arch/arm/boot/dts/qcom/qcom-ipq8064-v2.0-smb208.dtsi
++++ b/arch/arm/boot/dts/qcom/qcom-ipq8064-v2.0-smb208.dtsi
 @@ -2,6 +2,18 @@
  
  #include "qcom-ipq8064-v2.0.dtsi"
@@ -109,8 +110,8 @@ Tested-by: Jonathan McDowell <[email protected]>
  &rpm {
  	smb208_regulators: regulators {
  		compatible = "qcom,rpm-smb208-regulators";
---- a/arch/arm/boot/dts/qcom-ipq8062-smb208.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8062-smb208.dtsi
+--- a/arch/arm/boot/dts/qcom/qcom-ipq8062-smb208.dtsi
++++ b/arch/arm/boot/dts/qcom/qcom-ipq8062-smb208.dtsi
 @@ -2,6 +2,18 @@
  
  #include "qcom-ipq8062.dtsi"
@@ -130,8 +131,8 @@ Tested-by: Jonathan McDowell <[email protected]>
  &rpm {
  	smb208_regulators: regulators {
  		compatible = "qcom,rpm-smb208-regulators";
---- a/arch/arm/boot/dts/qcom-ipq8065-smb208.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8065-smb208.dtsi
+--- a/arch/arm/boot/dts/qcom/qcom-ipq8065-smb208.dtsi
++++ b/arch/arm/boot/dts/qcom/qcom-ipq8065-smb208.dtsi
 @@ -2,6 +2,18 @@
  
  #include "qcom-ipq8065.dtsi"

target/linux/ipq806x/patches-6.6/108-01-ARM-dts-qcom-fix-wrong-nad_pins-definition-for-ipq80.patch

@@ -7,11 +7,11 @@ Fix wrong nand_pings definition for bias-disable pins.
 
 Signed-off-by: Christian 'Ansuel' Marangi <[email protected]>
 ---
- arch/arm/boot/dts/qcom-ipq8064.dtsi | 7 ++-----
+ arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi | 7 ++-----
  1 file changed, 2 insertions(+), 5 deletions(-)
 
---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
+--- a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
++++ b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
 @@ -599,12 +599,9 @@
  			};
  

target/linux/ipq806x/patches-6.6/108-02-ARM-dts-qcom-add-MDIO-dedicated-controller-node-for-.patch

@@ -9,13 +9,13 @@ correctly use the new tag.
 
 Signed-off-by: Christian 'Ansuel' Marangi <[email protected]>
 ---
- arch/arm/boot/dts/qcom-ipq8064-rb3011.dts | 134 +++++++++++-----------
- arch/arm/boot/dts/qcom-ipq8064.dtsi       |  14 +++
+ arch/arm/boot/dts/qcom/qcom-ipq8064-rb3011.dts | 134 +++++++++++-----------
+ arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi       |  14 +++
  2 files changed, 81 insertions(+), 67 deletions(-)
 
---- a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
-+++ b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
-@@ -25,73 +25,6 @@
+--- a/arch/arm/boot/dts/qcom/qcom-ipq8064-rb3011.dts
++++ b/arch/arm/boot/dts/qcom/qcom-ipq8064-rb3011.dts
+@@ -25,131 +25,6 @@
  		device_type = "memory";
  	};
  
@@ -32,8 +32,6 @@ Signed-off-by: Christian 'Ansuel' Marangi <[email protected]>
 -
 -		switch0: switch@10 {
 -			compatible = "qca,qca8337";
--			#address-cells = <1>;
--			#size-cells = <0>;
 -
 -			dsa,member = <0 0>;
 -
@@ -61,26 +59,86 @@ Signed-off-by: Christian 'Ansuel' Marangi <[email protected]>
 -				port@1 {
 -					reg = <1>;
 -					label = "sw1";
+-
+-					leds {
+-						#address-cells = <1>;
+-						#size-cells = <0>;
+-
+-						led@0 {
+-							reg = <0>;
+-							color = <LED_COLOR_ID_GREEN>;
+-							function = LED_FUNCTION_LAN;
+-							default-state = "keep";
+-						};
+-					};
 -				};
 -
 -				port@2 {
 -					reg = <2>;
 -					label = "sw2";
+-
+-					leds {
+-						#address-cells = <1>;
+-						#size-cells = <0>;
+-
+-						led@0 {
+-							reg = <0>;
+-							color = <LED_COLOR_ID_GREEN>;
+-							function = LED_FUNCTION_LAN;
+-							default-state = "keep";
+-						};
+-					};
 -				};
 -
 -				port@3 {
 -					reg = <3>;
 -					label = "sw3";
+-
+-					leds {
+-						#address-cells = <1>;
+-						#size-cells = <0>;
+-
+-						led@0 {
+-							reg = <0>;
+-							color = <LED_COLOR_ID_GREEN>;
+-							function = LED_FUNCTION_LAN;
+-							default-state = "keep";
+-						};
+-					};
 -				};
 -
 -				port@4 {
 -					reg = <4>;
 -					label = "sw4";
+-
+-					leds {
+-						#address-cells = <1>;
+-						#size-cells = <0>;
+-
+-						led@0 {
+-							reg = <0>;
+-							color = <LED_COLOR_ID_GREEN>;
+-							function = LED_FUNCTION_LAN;
+-							default-state = "keep";
+-						};
+-					};
 -				};
 -
 -				port@5 {
 -					reg = <5>;
 -					label = "sw5";
+-
+-					leds {
+-						#address-cells = <1>;
+-						#size-cells = <0>;
+-
+-						led@0 {
+-							reg = <0>;
+-							color = <LED_COLOR_ID_GREEN>;
+-							function = LED_FUNCTION_LAN;
+-							default-state = "keep";
+-						};
+-					};
 -				};
 -			};
 -		};
@@ -89,7 +147,7 @@ Signed-off-by: Christian 'Ansuel' Marangi <[email protected]>
  	mdio1: mdio-1 {
  		status = "okay";
  		compatible = "virtual,mdio-gpio";
-@@ -222,6 +155,73 @@
+@@ -222,6 +155,131 @@
  	status = "okay";
  };
  
@@ -106,8 +164,6 @@ Signed-off-by: Christian 'Ansuel' Marangi <[email protected]>
 +
 +	switch0: switch@10 {
 +		compatible = "qca,qca8337";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
 +
 +		dsa,member = <0 0>;
 +
@@ -135,26 +191,86 @@ Signed-off-by: Christian 'Ansuel' Marangi <[email protected]>
 +			port@1 {
 +				reg = <1>;
 +				label = "sw1";
++
++				leds {
++					#address-cells = <1>;
++					#size-cells = <0>;
++
++					led@0 {
++						reg = <0>;
++						color = <LED_COLOR_ID_GREEN>;
++						function = LED_FUNCTION_LAN;
++						default-state = "keep";
++					};
++				};
 +			};
 +
 +			port@2 {
 +				reg = <2>;
 +				label = "sw2";
++
++				leds {
++					#address-cells = <1>;
++					#size-cells = <0>;
++
++					led@0 {
++						reg = <0>;
++						color = <LED_COLOR_ID_GREEN>;
++						function = LED_FUNCTION_LAN;
++						default-state = "keep";
++					};
++				};
 +			};
 +
 +			port@3 {
 +				reg = <3>;
 +				label = "sw3";
++
++				leds {
++					#address-cells = <1>;
++					#size-cells = <0>;
++
++					led@0 {
++						reg = <0>;
++						color = <LED_COLOR_ID_GREEN>;
++						function = LED_FUNCTION_LAN;
++						default-state = "keep";
++					};
++				};
 +			};
 +
 +			port@4 {
 +				reg = <4>;
 +				label = "sw4";
++
++				leds {
++					#address-cells = <1>;
++					#size-cells = <0>;
++
++					led@0 {
++						reg = <0>;
++						color = <LED_COLOR_ID_GREEN>;
++						function = LED_FUNCTION_LAN;
++						default-state = "keep";
++					};
++				};
 +			};
 +
 +			port@5 {
 +				reg = <5>;
 +				label = "sw5";
++
++				leds {
++					#address-cells = <1>;
++					#size-cells = <0>;
++
++					led@0 {
++						reg = <0>;
++						color = <LED_COLOR_ID_GREEN>;
++						function = LED_FUNCTION_LAN;
++						default-state = "keep";
++					};
++				};
 +			};
 +		};
 +	};
@@ -163,10 +279,10 @@ Signed-off-by: Christian 'Ansuel' Marangi <[email protected]>
  &gmac0 {
  	status = "okay";
  
---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
+--- a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
++++ b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
 @@ -476,6 +476,20 @@
- 			snps,blen = <16 0 0 0 0 0 0>;
+ 			status = "disabled";
  		};
  
 +		mdio0: mdio@37000000 {
@@ -183,6 +299,6 @@ Signed-off-by: Christian 'Ansuel' Marangi <[email protected]>
 +			status = "disabled";
 +		};
 +
- 		vsdcc_fixed: vsdcc-regulator {
- 			compatible = "regulator-fixed";
- 			regulator-name = "SDCC Power";
+ 		gmac0: ethernet@37000000 {
+ 			device_type = "network";
+ 			compatible = "qcom,ipq806x-gmac", "snps,dwmac";

target/linux/ipq806x/patches-6.6/114-02-ARM-dts-qcom-add-krait-cache-compatible-for-ipq806x-.patch

@@ -9,12 +9,12 @@ driver correctly probe.
 
 Signed-off-by: Christian Marangi <[email protected]>
 ---
- arch/arm/boot/dts/qcom-ipq8064.dtsi | 22 +++++++++++-----------
+ arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi | 22 +++++++++++-----------
  1 file changed, 11 insertions(+), 11 deletions(-)
 
---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -69,16 +69,6 @@
+--- a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
++++ b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
+@@ -69,17 +69,6 @@
  				min-residency-us = <3000>;
  			};
  		};
@@ -22,6 +22,7 @@ Signed-off-by: Christian Marangi <[email protected]>
 -		L2: l2-cache {
 -			compatible = "cache";
 -			cache-level = <2>;
+-			cache-unified;
 -			qcom,saw = <&saw_l2>;
 -
 -			clocks = <&kraitcc 4>;
@@ -31,13 +32,14 @@ Signed-off-by: Christian Marangi <[email protected]>
  	};
  
  	opp_table_l2: opp_table_l2 {
-@@ -1409,6 +1399,16 @@
+@@ -1409,6 +1399,17 @@
  			#reset-cells = <1>;
  		};
  
 +		L2: l2-cache {
 +			compatible = "cache", "qcom,krait-cache";
 +			cache-level = <2>;
++			cache-unified;
 +			qcom,saw = <&saw_l2>;
 +
 +			clocks = <&kraitcc 4>;

target/linux/ipq806x/patches-6.6/115-02-ARM-dts-qcom-add-fab-scaling-node-for-ipq806x.patch

@@ -8,11 +8,11 @@ fabric clk.
 
 Signed-off-by: Christian Marangi <[email protected]>
 ---
- arch/arm/boot/dts/qcom-ipq8064.dtsi | 19 +++++++++++++++++++
+ arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi | 19 +++++++++++++++++++
  1 file changed, 19 insertions(+)
 
---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
+--- a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
++++ b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
 @@ -170,6 +170,18 @@
  		};
  	};

target/linux/ipq806x/patches-6.6/122-05-clk-qcom-clk-krait-generilize-div-functions.patch

@@ -16,22 +16,21 @@ Signed-off-by: Christian Marangi <[email protected]>
 
 --- a/drivers/clk/qcom/clk-krait.c
 +++ b/drivers/clk/qcom/clk-krait.c
-@@ -97,53 +97,58 @@ const struct clk_ops krait_mux_clk_ops =
+@@ -97,53 +97,57 @@ const struct clk_ops krait_mux_clk_ops =
  EXPORT_SYMBOL_GPL(krait_mux_clk_ops);
  
  /* The divider can divide by 2, 4, 6 and 8. But we only really need div-2. */
--static long krait_div2_round_rate(struct clk_hw *hw, unsigned long rate,
-+static long krait_div_round_rate(struct clk_hw *hw, unsigned long rate,
- 				  unsigned long *parent_rate)
+-static int krait_div2_determine_rate(struct clk_hw *hw, struct clk_rate_request *req)
++static int krait_div_determine_rate(struct clk_hw *hw, struct clk_rate_request *req)
  {
--	*parent_rate = clk_hw_round_rate(clk_hw_get_parent(hw), rate * 2);
--	return DIV_ROUND_UP(*parent_rate, 2);
+-	req->best_parent_rate = clk_hw_round_rate(clk_hw_get_parent(hw), req->rate * 2);
+-	req->rate = DIV_ROUND_UP(req->best_parent_rate, 2);
 +	struct krait_div_clk *d = to_krait_div_clk(hw);
 +
-+	*parent_rate = clk_hw_round_rate(clk_hw_get_parent(hw),
-+					 rate * d->divisor);
-+
-+	return DIV_ROUND_UP(*parent_rate, d->divisor);
++	req->best_parent_rate = clk_hw_round_rate(clk_hw_get_parent(hw),
++						  req->rate * d->divisor);
++	req->rate = DIV_ROUND_UP(req->best_parent_rate, d->divisor);
+	return 0;
  }
  
 -static int krait_div2_set_rate(struct clk_hw *hw, unsigned long rate,
@@ -91,11 +90,11 @@ Signed-off-by: Christian Marangi <[email protected]>
  }
  
 -const struct clk_ops krait_div2_clk_ops = {
--	.round_rate = krait_div2_round_rate,
+-	.determine_rate = krait_div2_determine_rate,
 -	.set_rate = krait_div2_set_rate,
 -	.recalc_rate = krait_div2_recalc_rate,
 +const struct clk_ops krait_div_clk_ops = {
-+	.round_rate = krait_div_round_rate,
++	.determine_rate = krait_div_determine_rate,
 +	.set_rate = krait_div_set_rate,
 +	.recalc_rate = krait_div_recalc_rate,
  };