refresh 2.6.26 patches

SVN-Revision: 13135

target/linux/adm5120/patches-2.6.26/001-adm5120.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
-@@ -18,6 +18,21 @@
+@@ -18,6 +18,21 @@ choice
  	prompt "System type"
  	default SGI_IP22
  
@@ -22,7 +22,7 @@
  config MACH_ALCHEMY
  	bool "Alchemy processor based machines"
  
-@@ -687,6 +702,7 @@
+@@ -687,6 +702,7 @@ config WR_PPMC
  
  endchoice
  
@@ -32,7 +32,7 @@
  source "arch/mips/jazz/Kconfig"
 --- a/arch/mips/Makefile
 +++ b/arch/mips/Makefile
-@@ -174,6 +174,21 @@
+@@ -174,6 +174,21 @@ cflags-$(CONFIG_MACH_JAZZ)	+= -Iinclude/
  load-$(CONFIG_MACH_JAZZ)	+= 0xffffffff80080000
  
  #

target/linux/adm5120/patches-2.6.26/002-adm5120_flash.patch

@@ -1,6 +1,6 @@
 --- a/drivers/mtd/maps/Kconfig
 +++ b/drivers/mtd/maps/Kconfig
-@@ -586,5 +586,9 @@
+@@ -586,5 +586,9 @@ config MTD_PLATRAM
  
  	  This selection automatically selects the map_ram driver.
  
@@ -12,7 +12,7 @@
  
 --- a/drivers/mtd/maps/Makefile
 +++ b/drivers/mtd/maps/Makefile
-@@ -44,6 +44,7 @@
+@@ -44,6 +44,7 @@ obj-$(CONFIG_MTD_DBOX2)		+= dbox2-flash.
  obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
  obj-$(CONFIG_MTD_PCI)		+= pci.o
  obj-$(CONFIG_MTD_ALCHEMY)       += alchemy-flash.o

target/linux/adm5120/patches-2.6.26/003-adm5120_switch.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/Kconfig
 +++ b/drivers/net/Kconfig
-@@ -613,6 +613,10 @@
+@@ -613,6 +613,10 @@ config MIPS_AU1X00_ENET
  	  If you have an Alchemy Semi AU1X00 based system
  	  say Y.  Otherwise, say N.
  
@@ -13,7 +13,7 @@
  	depends on PCI && SGI_IP27
 --- a/drivers/net/Makefile
 +++ b/drivers/net/Makefile
-@@ -186,6 +186,7 @@
+@@ -186,6 +186,7 @@ obj-$(CONFIG_SC92031) += sc92031.o
  # This is also a 82596 and should probably be merged
  obj-$(CONFIG_LP486E) += lp486e.o
  

target/linux/adm5120/patches-2.6.26/005-adm5120_usb.patch

@@ -13,7 +13,7 @@
  	depends on USB
 --- a/drivers/usb/host/Makefile
 +++ b/drivers/usb/host/Makefile
-@@ -10,6 +10,7 @@
+@@ -10,6 +10,7 @@ isp1760-objs := isp1760-hcd.o isp1760-if
  
  obj-$(CONFIG_PCI)		+= pci-quirks.o
  
@@ -23,7 +23,7 @@
  obj-$(CONFIG_USB_OHCI_HCD)	+= ohci-hcd.o
 --- a/drivers/usb/Makefile
 +++ b/drivers/usb/Makefile
-@@ -16,6 +16,7 @@
+@@ -16,6 +16,7 @@ obj-$(CONFIG_USB_UHCI_HCD)	+= host/
  obj-$(CONFIG_USB_SL811_HCD)	+= host/
  obj-$(CONFIG_USB_U132_HCD)	+= host/
  obj-$(CONFIG_USB_R8A66597_HCD)	+= host/

target/linux/adm5120/patches-2.6.26/007-adm5120_pci.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/pci/Makefile
 +++ b/arch/mips/pci/Makefile
-@@ -48,3 +48,4 @@
+@@ -48,3 +48,4 @@ obj-$(CONFIG_TOSHIBA_RBTX4938)	+= fixup-
  obj-$(CONFIG_VICTOR_MPC30X)	+= fixup-mpc30x.o
  obj-$(CONFIG_ZAO_CAPCELLA)	+= fixup-capcella.o
  obj-$(CONFIG_WR_PPMC)		+= fixup-wrppmc.o

target/linux/adm5120/patches-2.6.26/009-adm5120_leds_switch_trigger.patch

@@ -1,6 +1,6 @@
 --- a/drivers/leds/Kconfig
 +++ b/drivers/leds/Kconfig
-@@ -207,4 +207,12 @@
+@@ -207,4 +207,12 @@ config LEDS_TRIGGER_NETDEV
  	  This allows LEDs to be controlled by network device activity.
  	  If unsure, say Y.
  
@@ -15,7 +15,7 @@
  endif # NEW_LEDS
 --- a/drivers/leds/Makefile
 +++ b/drivers/leds/Makefile
-@@ -30,3 +30,4 @@
+@@ -30,3 +30,4 @@ obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT)	+= 
  obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON)	+= ledtrig-default-on.o
  obj-$(CONFIG_LEDS_TRIGGER_MORSE)	+= ledtrig-morse.o
  obj-$(CONFIG_LEDS_TRIGGER_NETDEV)      += ledtrig-netdev.o

target/linux/adm5120/patches-2.6.26/100-mtd_myloder_partition_parser.patch

@@ -1,6 +1,6 @@
 --- a/drivers/mtd/Kconfig
 +++ b/drivers/mtd/Kconfig
-@@ -174,6 +174,22 @@
+@@ -174,6 +174,22 @@ config MTD_AR7_PARTS
  	---help---
  	  TI AR7 partitioning support
  
@@ -25,7 +25,7 @@
  config MTD_CHAR
 --- a/drivers/mtd/Makefile
 +++ b/drivers/mtd/Makefile
-@@ -13,6 +13,7 @@
+@@ -13,6 +13,7 @@ obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdli
  obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o
  obj-$(CONFIG_MTD_AR7_PARTS)	+= ar7part.o
  obj-$(CONFIG_MTD_OF_PARTS)      += ofpart.o

target/linux/adm5120/patches-2.6.26/101-cfi_fixup_macronix_bootloc.patch

@@ -20,7 +20,7 @@
  static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
  static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
  static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-@@ -243,6 +250,41 @@
+@@ -243,6 +250,41 @@ static void fixup_s29gl032n_sectors(stru
  	}
  }
  
@@ -62,7 +62,7 @@
  static struct cfi_fixup cfi_fixup_table[] = {
  	{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
  #ifdef AMD_BOOTLOC_BUG
-@@ -278,6 +320,9 @@
+@@ -278,6 +320,9 @@ static struct cfi_fixup fixup_table[] = 
  	 */
  	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_erase_chip, NULL },
  	{ CFI_MFR_ATMEL, AT49BV6416, fixup_use_atmel_lock, NULL },
@@ -74,7 +74,7 @@
  
 --- a/drivers/mtd/chips/Kconfig
 +++ b/drivers/mtd/chips/Kconfig
-@@ -196,6 +196,14 @@
+@@ -196,6 +196,14 @@ config MTD_CFI_AMDSTD
  	  provides support for one of those command sets, used on chips
  	  including the AMD Am29LV320.
  

target/linux/adm5120/patches-2.6.26/102-jedec_pmc_39lvxxx_chips.patch

@@ -11,7 +11,7 @@
  #define PM49FL002	0x006D
  #define PM49FL004	0x006E
  #define PM49FL008	0x006A
-@@ -1173,6 +1177,54 @@
+@@ -1173,6 +1177,54 @@ static const struct amd_flash_info jedec
  			ERASEINFO(0x02000,2),
  			ERASEINFO(0x04000,1),
  		}

target/linux/adm5120/patches-2.6.26/103-mtd_trxsplit.patch

@@ -1,6 +1,6 @@
 --- a/drivers/mtd/Kconfig
 +++ b/drivers/mtd/Kconfig
-@@ -57,6 +57,11 @@
+@@ -57,6 +57,11 @@ config MTD_ROOTFS_SPLIT
  	depends on MTD_PARTITIONS
  	default y
  
@@ -14,7 +14,7 @@
  	depends on MTD_PARTITIONS
 --- a/drivers/mtd/Makefile
 +++ b/drivers/mtd/Makefile
-@@ -8,6 +8,7 @@
+@@ -8,6 +8,7 @@ mtd-y				:= mtdcore.o mtdsuper.o
  mtd-$(CONFIG_MTD_PARTITIONS)	+= mtdpart.o
  
  obj-$(CONFIG_MTD_CONCAT)	+= mtdconcat.o

target/linux/adm5120/patches-2.6.26/120-rb153_cf_driver.patch

@@ -1,6 +1,6 @@
 --- a/drivers/ata/Makefile
 +++ b/drivers/ata/Makefile
-@@ -72,6 +72,7 @@
+@@ -72,6 +72,7 @@ obj-$(CONFIG_PATA_BF54X)	+= pata_bf54x.o
  obj-$(CONFIG_PATA_PLATFORM)	+= pata_platform.o
  obj-$(CONFIG_PATA_OF_PLATFORM)	+= pata_of_platform.o
  obj-$(CONFIG_PATA_ICSIDE)	+= pata_icside.o
@@ -10,7 +10,7 @@
  # Should be last but one libata driver
 --- a/drivers/ata/Kconfig
 +++ b/drivers/ata/Kconfig
-@@ -566,6 +566,15 @@
+@@ -566,6 +566,15 @@ config PATA_RADISYS
  
  	  If unsure, say N.
  

target/linux/adm5120/patches-2.6.26/200-amba_pl010_hacks.patch

@@ -14,7 +14,7 @@
  
  #define AMBA_ISR_PASS_LIMIT	256
  
-@@ -82,9 +81,9 @@
+@@ -82,9 +81,9 @@ static void pl010_stop_tx(struct uart_po
  	struct uart_amba_port *uap = (struct uart_amba_port *)port;
  	unsigned int cr;
  
@@ -26,7 +26,7 @@
  }
  
  static void pl010_start_tx(struct uart_port *port)
-@@ -92,9 +91,9 @@
+@@ -92,9 +91,9 @@ static void pl010_start_tx(struct uart_p
  	struct uart_amba_port *uap = (struct uart_amba_port *)port;
  	unsigned int cr;
  
@@ -38,7 +38,7 @@
  }
  
  static void pl010_stop_rx(struct uart_port *port)
-@@ -102,9 +101,9 @@
+@@ -102,9 +101,9 @@ static void pl010_stop_rx(struct uart_po
  	struct uart_amba_port *uap = (struct uart_amba_port *)port;
  	unsigned int cr;
  
@@ -50,7 +50,7 @@
  }
  
  static void pl010_enable_ms(struct uart_port *port)
-@@ -112,9 +111,9 @@
+@@ -112,9 +111,9 @@ static void pl010_enable_ms(struct uart_
  	struct uart_amba_port *uap = (struct uart_amba_port *)port;
  	unsigned int cr;
  
@@ -62,7 +62,7 @@
  }
  
  static void pl010_rx_chars(struct uart_amba_port *uap)
-@@ -122,9 +121,9 @@
+@@ -122,9 +121,9 @@ static void pl010_rx_chars(struct uart_a
  	struct tty_struct *tty = uap->port.info->tty;
  	unsigned int status, ch, flag, rsr, max_count = 256;
  
@@ -74,7 +74,7 @@
  		flag = TTY_NORMAL;
  
  		uap->port.icount.rx++;
-@@ -133,9 +132,9 @@
+@@ -133,9 +132,9 @@ static void pl010_rx_chars(struct uart_a
  		 * Note that the error handling code is
  		 * out of the main execution path
  		 */
@@ -86,7 +86,7 @@
  
  			if (rsr & UART01x_RSR_BE) {
  				rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE);
-@@ -165,7 +164,7 @@
+@@ -165,7 +164,7 @@ static void pl010_rx_chars(struct uart_a
  		uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag);
  
  	ignore_char:
@@ -95,7 +95,7 @@
  	}
  	spin_unlock(&uap->port.lock);
  	tty_flip_buffer_push(tty);
-@@ -178,7 +177,7 @@
+@@ -178,7 +177,7 @@ static void pl010_tx_chars(struct uart_a
  	int count;
  
  	if (uap->port.x_char) {
@@ -104,7 +104,7 @@
  		uap->port.icount.tx++;
  		uap->port.x_char = 0;
  		return;
-@@ -190,7 +189,7 @@
+@@ -190,7 +189,7 @@ static void pl010_tx_chars(struct uart_a
  
  	count = uap->port.fifosize >> 1;
  	do {
@@ -113,7 +113,7 @@
  		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
  		uap->port.icount.tx++;
  		if (uart_circ_empty(xmit))
-@@ -208,9 +207,9 @@
+@@ -208,9 +207,9 @@ static void pl010_modem_status(struct ua
  {
  	unsigned int status, delta;
  
@@ -125,7 +125,7 @@
  
  	delta = status ^ uap->old_status;
  	uap->old_status = status;
-@@ -238,7 +237,7 @@
+@@ -238,7 +237,7 @@ static irqreturn_t pl010_int(int irq, vo
  
  	spin_lock(&uap->port.lock);
  
@@ -134,7 +134,7 @@
  	if (status) {
  		do {
  			if (status & (UART010_IIR_RTIS | UART010_IIR_RIS))
-@@ -251,7 +250,7 @@
+@@ -251,7 +250,7 @@ static irqreturn_t pl010_int(int irq, vo
  			if (pass_counter-- == 0)
  				break;
  
@@ -143,7 +143,7 @@
  		} while (status & (UART010_IIR_RTIS | UART010_IIR_RIS |
  				   UART010_IIR_TIS));
  		handled = 1;
-@@ -265,7 +264,7 @@
+@@ -265,7 +264,7 @@ static irqreturn_t pl010_int(int irq, vo
  static unsigned int pl010_tx_empty(struct uart_port *port)
  {
  	struct uart_amba_port *uap = (struct uart_amba_port *)port;
@@ -152,7 +152,7 @@
  	return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT;
  }
  
-@@ -275,7 +274,7 @@
+@@ -275,7 +274,7 @@ static unsigned int pl010_get_mctrl(stru
  	unsigned int result = 0;
  	unsigned int status;
  
@@ -161,7 +161,7 @@
  	if (status & UART01x_FR_DCD)
  		result |= TIOCM_CAR;
  	if (status & UART01x_FR_DSR)
-@@ -301,12 +300,12 @@
+@@ -301,12 +300,12 @@ static void pl010_break_ctl(struct uart_
  	unsigned int lcr_h;
  
  	spin_lock_irqsave(&uap->port.lock, flags);
@@ -176,7 +176,7 @@
  	spin_unlock_irqrestore(&uap->port.lock, flags);
  }
  
-@@ -334,12 +333,12 @@
+@@ -334,12 +333,12 @@ static int pl010_startup(struct uart_por
  	/*
  	 * initialise the old status of the modem signals
  	 */
@@ -191,7 +191,7 @@
  	       uap->port.membase + UART010_CR);
  
  	return 0;
-@@ -362,10 +361,10 @@
+@@ -362,10 +361,10 @@ static void pl010_shutdown(struct uart_p
  	/*
  	 * disable all interrupts, disable the port
  	 */
@@ -204,7 +204,7 @@
  		~(UART01x_LCRH_BRK | UART01x_LCRH_FEN),
  	       uap->port.membase + UART010_LCRH);
  
-@@ -387,7 +386,7 @@
+@@ -387,7 +386,7 @@ pl010_set_termios(struct uart_port *port
  	/*
  	 * Ask the core to calculate the divisor for us.
  	 */
@@ -213,7 +213,7 @@
  	quot = uart_get_divisor(port, baud);
  
  	switch (termios->c_cflag & CSIZE) {
-@@ -450,25 +449,25 @@
+@@ -450,25 +449,25 @@ pl010_set_termios(struct uart_port *port
  		uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX;
  
  	/* first, disable everything */
@@ -245,7 +245,7 @@
  
  	spin_unlock_irqrestore(&uap->port.lock, flags);
  }
-@@ -540,7 +539,7 @@
+@@ -540,7 +539,7 @@ static struct uart_ops amba_pl010_pops =
  	.verify_port	= pl010_verify_port,
  };
  
@@ -254,7 +254,7 @@
  
  #ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE
  
-@@ -550,10 +549,10 @@
+@@ -550,10 +549,10 @@ static void pl010_console_putchar(struct
  	unsigned int status;
  
  	do {
@@ -267,7 +267,7 @@
  }
  
  static void
-@@ -567,8 +566,8 @@
+@@ -567,8 +566,8 @@ pl010_console_write(struct console *co, 
  	/*
  	 *	First save the CR then disable the interrupts
  	 */
@@ -278,7 +278,7 @@
  
  	uart_console_write(&uap->port, s, count, pl010_console_putchar);
  
-@@ -577,10 +576,10 @@
+@@ -577,10 +576,10 @@ pl010_console_write(struct console *co, 
  	 *	and restore the TCR
  	 */
  	do {
@@ -291,7 +291,7 @@
  
  	clk_disable(uap->clk);
  }
-@@ -589,9 +588,9 @@
+@@ -589,9 +588,9 @@ static void __init
  pl010_console_get_options(struct uart_amba_port *uap, int *baud,
  			     int *parity, int *bits)
  {
@@ -303,7 +303,7 @@
  
  		*parity = 'n';
  		if (lcr_h & UART01x_LCRH_PEN) {
-@@ -606,8 +605,8 @@
+@@ -606,8 +605,8 @@ pl010_console_get_options(struct uart_am
  		else
  			*bits = 8;
  
@@ -314,7 +314,7 @@
  		*baud = uap->port.uartclk / (16 * (quot + 1));
  	}
  }
-@@ -625,7 +624,7 @@
+@@ -625,7 +624,7 @@ static int __init pl010_console_setup(st
  	 * if so, search for the first available port that does have
  	 * console support.
  	 */
@@ -323,7 +323,7 @@
  		co->index = 0;
  	uap = amba_ports[co->index];
  	if (!uap)
-@@ -643,7 +642,7 @@
+@@ -643,7 +642,7 @@ static int __init pl010_console_setup(st
  
  static struct uart_driver amba_reg;
  static struct console amba_console = {
@@ -332,7 +332,7 @@
  	.write		= pl010_console_write,
  	.device		= uart_console_device,
  	.setup		= pl010_console_setup,
-@@ -659,11 +658,11 @@
+@@ -659,11 +658,11 @@ static struct console amba_console = {
  
  static struct uart_driver amba_reg = {
  	.owner			= THIS_MODULE,
@@ -349,7 +349,7 @@
  
 --- a/drivers/serial/Kconfig
 +++ b/drivers/serial/Kconfig
-@@ -287,10 +287,25 @@
+@@ -287,10 +287,25 @@ config SERIAL_AMBA_PL010
  	help
  	  This selects the ARM(R) AMBA(R) PrimeCell PL010 UART.  If you have
  	  an Integrator/AP or Integrator/PP2 platform, or if you have a

target/linux/adm5120/patches-2.6.26/202-pci_disable_common_quirks.patch

@@ -1,6 +1,6 @@
 --- a/drivers/pci/Kconfig
 +++ b/drivers/pci/Kconfig
-@@ -42,6 +42,12 @@
+@@ -42,6 +42,12 @@ config PCI_DEBUG
  
  	  When in doubt, say N.
  
@@ -23,7 +23,7 @@
  /* The Mellanox Tavor device gives false positive parity errors
   * Mark this device with a broken_parity_status, to allow
   * PCI scanning code to "skip" this now blacklisted device.
-@@ -1495,6 +1496,7 @@
+@@ -1495,6 +1496,7 @@ static void __devinit fixup_rev1_53c810(
  	}
  }
  DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810);
@@ -31,7 +31,7 @@
  
  static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, struct pci_fixup *end)
  {
-@@ -1561,6 +1563,7 @@
+@@ -1561,6 +1563,7 @@ void pci_fixup_device(enum pci_fixup_pas
  }
  EXPORT_SYMBOL(pci_fixup_device);
  
@@ -39,7 +39,7 @@
  /* Enable 1k I/O space granularity on the Intel P64H2 */
  static void __devinit quirk_p64h2_1k_io(struct pci_dev *dev)
  {
-@@ -1934,3 +1937,4 @@
+@@ -1934,3 +1937,4 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AT
  			quirk_msi_intx_disable_bug);
  
  #endif /* CONFIG_PCI_MSI */

target/linux/adm5120/patches-2.6.26/203-gpio_leds_brightness.patch

@@ -1,6 +1,6 @@
 --- a/drivers/leds/leds-gpio.c
 +++ b/drivers/leds/leds-gpio.c
-@@ -43,13 +43,17 @@
+@@ -43,13 +43,17 @@ static void gpio_led_set(struct led_clas
  		container_of(led_cdev, struct gpio_led_data, cdev);
  	int level;
  

target/linux/adm5120/patches-2.6.26/310-adm5120_wdt.patch

@@ -1,6 +1,6 @@
 --- a/drivers/watchdog/Kconfig
 +++ b/drivers/watchdog/Kconfig
-@@ -632,6 +632,18 @@
+@@ -632,6 +632,18 @@ config SBC_EPX_C3_WATCHDOG
  
  # MIPS Architecture
  
@@ -21,7 +21,7 @@
  	depends on SGI_HAS_INDYDOG
 --- a/drivers/watchdog/Makefile
 +++ b/drivers/watchdog/Makefile
-@@ -91,6 +91,7 @@
+@@ -91,6 +91,7 @@ obj-$(CONFIG_SBC_EPX_C3_WATCHDOG) += sbc
  # M68KNOMMU Architecture
  
  # MIPS Architecture

target/linux/ar7/patches-2.6.26/100-board_support.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
-@@ -18,6 +18,23 @@
+@@ -18,6 +18,23 @@ choice
  	prompt "System type"
  	default SGI_IP22
  
@@ -26,7 +26,7 @@
  
 --- a/arch/mips/kernel/traps.c
 +++ b/arch/mips/kernel/traps.c
-@@ -1188,9 +1188,22 @@
+@@ -1188,9 +1188,22 @@ void *set_except_vector(int n, void *add
  
  	exception_handlers[n] = handler;
  	if (n == 0 && cpu_has_divec) {
@@ -54,7 +54,7 @@
  }
 --- a/arch/mips/Makefile
 +++ b/arch/mips/Makefile
-@@ -167,6 +167,13 @@
+@@ -167,6 +167,13 @@ libs-$(CONFIG_SIBYTE_CFE)	+= arch/mips/s
  #
  
  #
@@ -70,7 +70,7 @@
  core-$(CONFIG_MACH_JAZZ)	+= arch/mips/jazz/
 --- a/include/asm-mips/page.h
 +++ b/include/asm-mips/page.h
-@@ -182,8 +182,10 @@
+@@ -182,8 +182,10 @@ typedef struct { unsigned long pgprot; }
  #define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
  				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
  

target/linux/ar7/patches-2.6.26/110-flash.patch

@@ -1,6 +1,6 @@
 --- a/drivers/mtd/Kconfig
 +++ b/drivers/mtd/Kconfig
-@@ -174,6 +174,12 @@
+@@ -174,6 +174,12 @@ config MTD_AR7_PARTS
  	---help---
  	  TI AR7 partitioning support
  
@@ -15,7 +15,7 @@
  config MTD_CHAR
 --- a/drivers/mtd/Makefile
 +++ b/drivers/mtd/Makefile
-@@ -13,6 +13,7 @@
+@@ -13,6 +13,7 @@ obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdli
  obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o
  obj-$(CONFIG_MTD_AR7_PARTS)	+= ar7part.o
  obj-$(CONFIG_MTD_OF_PARTS)      += ofpart.o
@@ -25,7 +25,7 @@
  obj-$(CONFIG_MTD_CHAR)		+= mtdchar.o
 --- a/drivers/mtd/maps/physmap.c
 +++ b/drivers/mtd/maps/physmap.c
-@@ -87,7 +87,8 @@
+@@ -87,7 +87,8 @@ static int physmap_flash_remove(struct p
  
  static const char *rom_probe_types[] = { "cfi_probe", "jedec_probe", "map_rom", NULL };
  #ifdef CONFIG_MTD_PARTITIONS

target/linux/ar7/patches-2.6.26/120-gpio_chrdev.patch

@@ -1,6 +1,6 @@
 --- a/drivers/char/Kconfig
 +++ b/drivers/char/Kconfig
-@@ -960,6 +960,15 @@
+@@ -960,6 +960,15 @@ config MWAVE
  	  To compile this driver as a module, choose M here: the
  	  module will be called mwave.
  
@@ -18,7 +18,7 @@
  	depends on SCx200
 --- a/drivers/char/Makefile
 +++ b/drivers/char/Makefile
-@@ -91,6 +91,7 @@
+@@ -91,6 +91,7 @@ obj-$(CONFIG_COBALT_LCD)	+= lcd.o
  obj-$(CONFIG_PPDEV)		+= ppdev.o
  obj-$(CONFIG_NWBUTTON)		+= nwbutton.o
  obj-$(CONFIG_NWFLASH)		+= nwflash.o

target/linux/ar7/patches-2.6.26/130-vlynq.patch

@@ -1,6 +1,6 @@
 --- a/drivers/Kconfig
 +++ b/drivers/Kconfig
-@@ -100,5 +100,7 @@
+@@ -100,5 +100,7 @@ source "drivers/auxdisplay/Kconfig"
  
  source "drivers/uio/Kconfig"
  
@@ -10,7 +10,7 @@
  endmenu
 --- a/drivers/Makefile
 +++ b/drivers/Makefile
-@@ -92,5 +92,6 @@
+@@ -92,5 +92,6 @@ obj-$(CONFIG_DCA)		+= dca/
  obj-$(CONFIG_HID)		+= hid/
  obj-$(CONFIG_PPC_PS3)		+= ps3/
  obj-$(CONFIG_OF)		+= of/

target/linux/ar7/patches-2.6.26/150-cpmac_not_broken.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/Kconfig
 +++ b/drivers/net/Kconfig
-@@ -1867,7 +1867,7 @@
+@@ -1867,7 +1867,7 @@ config SC92031
  
  config CPMAC
  	tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)"

target/linux/ar7/patches-2.6.26/200-mtd_fixes.patch

@@ -11,7 +11,7 @@
  struct ar7_bin_rec {
  	unsigned int checksum;
  	unsigned int length;
-@@ -47,7 +51,8 @@
+@@ -47,7 +51,8 @@ static int create_mtd_partitions(struct 
  				 unsigned long origin)
  {
  	struct ar7_bin_rec header;
@@ -21,7 +21,7 @@
  	unsigned int pre_size = master->erasesize, post_size = 0;
  	unsigned int root_offset = ROOT_OFFSET;
  
-@@ -66,7 +71,7 @@
+@@ -66,7 +71,7 @@ static int create_mtd_partitions(struct 
  	do { /* Try 10 blocks starting from master->erasesize */
  		offset = pre_size;
  		master->read(master, offset,
@@ -30,7 +30,7 @@
  		if (!strncmp((char *)&header, "TIENV0.8", 8))
  			ar7_parts[1].offset = pre_size;
  		if (header.checksum == LOADER_MAGIC1)
-@@ -88,7 +93,7 @@
+@@ -88,7 +93,7 @@ static int create_mtd_partitions(struct 
  		while (header.length) {
  			offset += sizeof(header) + header.length;
  			master->read(master, offset, sizeof(header),
@@ -39,7 +39,7 @@
  		}
  		root_offset = offset + sizeof(header) + 4;
  		break;
-@@ -96,10 +101,10 @@
+@@ -96,10 +101,10 @@ static int create_mtd_partitions(struct 
  		while (header.length) {
  			offset += sizeof(header) + header.length;
  			master->read(master, offset, sizeof(header),

target/linux/ar7/patches-2.6.26/500-serial_kludge.patch

@@ -1,6 +1,6 @@
 --- a/drivers/serial/8250.c
 +++ b/drivers/serial/8250.c
-@@ -266,6 +266,13 @@
+@@ -266,6 +266,13 @@ static const struct serial8250_config ua
  		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
  		.flags		= UART_CAP_FIFO,
  	},
@@ -14,7 +14,7 @@
  };
  
  #if defined (CONFIG_SERIAL_8250_AU1X00)
-@@ -2524,7 +2531,11 @@
+@@ -2524,7 +2531,11 @@ static void serial8250_console_putchar(s
  {
  	struct uart_8250_port *up = (struct uart_8250_port *)port;
  

target/linux/ar7/patches-2.6.26/900-cpmac_multiqueue.patch

@@ -19,7 +19,7 @@ because other drivers do it in the same way.
 
 --- a/drivers/net/cpmac.c
 +++ b/drivers/net/cpmac.c
-@@ -627,7 +627,7 @@
+@@ -627,7 +627,7 @@ static void cpmac_end_xmit(struct net_de
  		dev_kfree_skb_irq(desc->skb);
  		desc->skb = NULL;
  #ifdef CONFIG_NETDEVICES_MULTIQUEUE
@@ -28,7 +28,7 @@ because other drivers do it in the same way.
  			netif_wake_subqueue(dev, queue);
  #else
  		if (netif_queue_stopped(dev))
-@@ -638,7 +638,7 @@
+@@ -638,7 +638,7 @@ static void cpmac_end_xmit(struct net_de
  			printk(KERN_WARNING
  			       "%s: end_xmit: spurious interrupt\n", dev->name);
  #ifdef CONFIG_NETDEVICES_MULTIQUEUE
@@ -37,7 +37,7 @@ because other drivers do it in the same way.
  			netif_wake_subqueue(dev, queue);
  #else
  		if (netif_queue_stopped(dev))
-@@ -1124,7 +1124,7 @@
+@@ -1124,7 +1124,7 @@ static int external_switch;
  
  static int __devinit cpmac_probe(struct platform_device *pdev)
  {
@@ -46,7 +46,7 @@ because other drivers do it in the same way.
  	char *mdio_bus_id = "0";
  	struct resource *mem;
  	struct cpmac_priv *priv;
-@@ -1152,7 +1152,11 @@
+@@ -1152,7 +1152,11 @@ static int __devinit cpmac_probe(struct 
  		}
  	}
  
@@ -58,7 +58,7 @@ because other drivers do it in the same way.
  
  	if (!dev) {
  		printk(KERN_ERR "cpmac: Unable to allocate net_device\n");
-@@ -1179,7 +1183,9 @@
+@@ -1179,7 +1183,9 @@ static int __devinit cpmac_probe(struct 
  	dev->set_multicast_list = cpmac_set_multicast_list;
  	dev->tx_timeout         = cpmac_tx_timeout;
  	dev->ethtool_ops        = &cpmac_ethtool_ops;

target/linux/ar7/patches-2.6.26/900-temporary_cpmac_hack.diff

@@ -1,6 +1,6 @@
 --- a/drivers/net/cpmac.c
 +++ b/drivers/net/cpmac.c
-@@ -948,7 +948,8 @@
+@@ -948,7 +948,8 @@ static void cpmac_adjust_link(struct net
  	int new_state = 0;
  
  	spin_lock(&priv->lock);
@@ -10,7 +10,7 @@
  		netif_start_queue(dev);
  		if (priv->phy->duplex != priv->oldduplex) {
  			new_state = 1;
-@@ -960,11 +961,11 @@
+@@ -960,11 +961,11 @@ static void cpmac_adjust_link(struct net
  			priv->oldspeed = priv->phy->speed;
  		}
  

target/linux/ar71xx/patches-2.6.26/001-ar71xx_core.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/Makefile
 +++ b/arch/mips/Makefile
-@@ -597,6 +597,13 @@
+@@ -597,6 +597,13 @@ core-$(CONFIG_TOSHIBA_RBTX4938) += arch/
  cflags-$(CONFIG_TOSHIBA_RBTX4938) += -Iinclude/asm-mips/mach-tx49xx
  load-$(CONFIG_TOSHIBA_RBTX4938) += 0xffffffff80100000
  
@@ -35,7 +35,7 @@
  #define  MACH_NEC_MARKEINS	0	/* NEC EMMA2RH Mark-eins	*/
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
-@@ -21,6 +21,24 @@
+@@ -21,6 +21,24 @@ choice
  config MACH_ALCHEMY
  	bool "Alchemy processor based machines"
  
@@ -60,7 +60,7 @@
  config BASLER_EXCITE
  	bool "Basler eXcite smart camera"
  	select CEVT_R4K
-@@ -687,6 +705,7 @@
+@@ -687,6 +705,7 @@ config WR_PPMC
  
  endchoice
  

target/linux/ar71xx/patches-2.6.26/002-ar71xx_pci.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/pci/Makefile
 +++ b/arch/mips/pci/Makefile
-@@ -15,6 +15,7 @@
+@@ -15,6 +15,7 @@ obj-$(CONFIG_MIPS_TX3927)	+= ops-tx3927.
  obj-$(CONFIG_PCI_VR41XX)	+= ops-vr41xx.o pci-vr41xx.o
  obj-$(CONFIG_NEC_CMBVR4133)	+= fixup-vr4133.o
  obj-$(CONFIG_MARKEINS)		+= ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o

target/linux/ar71xx/patches-2.6.26/003-ar71xx_usb_host.patch

@@ -1,6 +1,6 @@
 --- a/drivers/usb/host/Kconfig
 +++ b/drivers/usb/host/Kconfig
-@@ -81,6 +81,12 @@
+@@ -81,6 +81,12 @@ config USB_EHCI_BIG_ENDIAN_DESC
  	depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX)
  	default y
  
@@ -13,7 +13,7 @@
  config USB_EHCI_FSL
  	bool "Support for Freescale on-chip EHCI USB controller"
  	depends on USB_EHCI_HCD && FSL_SOC
-@@ -152,6 +158,12 @@
+@@ -152,6 +158,12 @@ config USB_OHCI_HCD
  	  To compile this driver as a module, choose M here: the
  	  module will be called ohci-hcd.
  
@@ -28,7 +28,7 @@
  	depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx)
 --- a/drivers/usb/host/ehci-hcd.c
 +++ b/drivers/usb/host/ehci-hcd.c
-@@ -1034,6 +1034,11 @@
+@@ -1034,6 +1034,11 @@ MODULE_LICENSE ("GPL");
  #define	PLATFORM_DRIVER		ixp4xx_ehci_driver
  #endif
  
@@ -42,7 +42,7 @@
  #error "missing bus glue for ehci-hcd"
 --- a/drivers/usb/host/ohci.h
 +++ b/drivers/usb/host/ohci.h
-@@ -538,6 +538,11 @@
+@@ -538,6 +538,11 @@ static inline struct usb_hcd *ohci_to_hc
  #define writel_be(val, addr)	out_be32((__force unsigned *)addr, val)
  #endif
  
@@ -56,7 +56,7 @@
  {
 --- a/drivers/usb/host/ohci-hcd.c
 +++ b/drivers/usb/host/ohci-hcd.c
-@@ -1057,6 +1057,11 @@
+@@ -1057,6 +1057,11 @@ MODULE_LICENSE ("GPL");
  #define SM501_OHCI_DRIVER	ohci_hcd_sm501_driver
  #endif
  

target/linux/ar71xx/patches-2.6.26/004-ar71xx_spi_controller.patch

@@ -1,6 +1,6 @@
 --- a/drivers/spi/Kconfig
 +++ b/drivers/spi/Kconfig
-@@ -52,6 +52,13 @@
+@@ -52,6 +52,13 @@ config SPI_MASTER
  comment "SPI Master Controller Drivers"
  	depends on SPI_MASTER
  
@@ -16,7 +16,7 @@
  	depends on (ARCH_AT91 || AVR32) && SPI_MASTER
 --- a/drivers/spi/Makefile
 +++ b/drivers/spi/Makefile
-@@ -11,6 +11,7 @@
+@@ -11,6 +11,7 @@ endif
  obj-$(CONFIG_SPI_MASTER)		+= spi.o
  
  # SPI master controller drivers (bus)

target/linux/ar71xx/patches-2.6.26/005-ar71xx_mac_driver.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/Kconfig
 +++ b/drivers/net/Kconfig
-@@ -2060,6 +2060,8 @@
+@@ -2060,6 +2060,8 @@ config ACENIC_OMIT_TIGON_I
  
  	  The safe and default value for this is N.
  

target/linux/ar71xx/patches-2.6.26/006-ar71xx_wdt_driver.patch

@@ -1,6 +1,6 @@
 --- a/drivers/watchdog/Kconfig
 +++ b/drivers/watchdog/Kconfig
-@@ -683,6 +683,13 @@
+@@ -683,6 +683,13 @@ config TXX9_WDT
  	help
  	  Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
  
@@ -16,7 +16,7 @@
  # POWERPC Architecture
 --- a/drivers/watchdog/Makefile
 +++ b/drivers/watchdog/Makefile
-@@ -97,6 +97,7 @@
+@@ -97,6 +97,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
  obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
  obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
  obj-$(CONFIG_TXX9_WDT) += txx9wdt.o

target/linux/ar71xx/patches-2.6.26/100-mtd_pm25lv_flash_support.patch

@@ -1,6 +1,6 @@
 --- a/drivers/mtd/devices/m25p80.c
 +++ b/drivers/mtd/devices/m25p80.c
-@@ -455,6 +455,10 @@
+@@ -455,6 +455,10 @@ static struct flash_info __devinitdata m
  	{ "at26df161a", 0x1f4601, 64 * 1024, 32, SECT_4K, },
  	{ "at26df321",  0x1f4701, 64 * 1024, 64, SECT_4K, },
  

target/linux/ar71xx/patches-2.6.26/101-ksz8041_phy_driver.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -76,6 +76,11 @@
+@@ -82,6 +82,11 @@ config MVSWITCH_PHY
  	---help---
  	  Currently supports the Marvell 88E6060 switch.
  
@@ -14,7 +14,7 @@
  	depends on PHYLIB=y
 --- a/drivers/net/phy/Makefile
 +++ b/drivers/net/phy/Makefile
-@@ -15,5 +15,6 @@
+@@ -16,5 +16,6 @@ obj-$(CONFIG_ICPLUS_PHY)	+= icplus.o
  obj-$(CONFIG_ADM6996_PHY)	+= adm6996.o
  obj-$(CONFIG_MVSWITCH_PHY)	+= mvswitch.o
  obj-$(CONFIG_REALTEK_PHY)	+= realtek.o

target/linux/ar71xx/patches-2.6.26/140-redboot_partition_scan.patch

@@ -1,6 +1,6 @@
 --- a/drivers/mtd/redboot.c
 +++ b/drivers/mtd/redboot.c
-@@ -62,31 +62,32 @@
+@@ -62,31 +62,32 @@ static int parse_redboot_partitions(stru
  	static char nullstring[] = "unallocated";
  #endif
  
@@ -40,7 +40,7 @@
  	printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
  	       master->name, offset);
  
-@@ -158,6 +159,11 @@
+@@ -158,6 +159,11 @@ static int parse_redboot_partitions(stru
  	}
  	if (i == numslots) {
  		/* Didn't find it */

target/linux/ar71xx/patches-2.6.26/200-rb4xx_nand_driver.patch

@@ -1,6 +1,6 @@
 --- a/drivers/mtd/nand/Kconfig
 +++ b/drivers/mtd/nand/Kconfig
-@@ -386,4 +386,8 @@
+@@ -386,4 +386,8 @@ config MTD_NAND_FSL_UPM
  	  Enables support for NAND Flash chips wired onto Freescale PowerPC
  	  processor localbus with User-Programmable Machine support.
  
@@ -11,7 +11,7 @@
  endif # MTD_NAND
 --- a/drivers/mtd/nand/Makefile
 +++ b/drivers/mtd/nand/Makefile
-@@ -29,6 +29,7 @@
+@@ -29,6 +29,7 @@ obj-$(CONFIG_MTD_NAND_CM_X270)		+= cmx27
  obj-$(CONFIG_MTD_NAND_BASLER_EXCITE)	+= excite_nandflash.o
  obj-$(CONFIG_MTD_NAND_PXA3xx)		+= pxa3xx_nand.o
  obj-$(CONFIG_MTD_NAND_PLATFORM)		+= plat_nand.o

target/linux/ar71xx/patches-2.6.26/300-mips_fw_myloader.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/Makefile
 +++ b/arch/mips/Makefile
-@@ -158,6 +158,7 @@
+@@ -158,6 +158,7 @@ endif
  #
  libs-$(CONFIG_ARC)		+= arch/mips/fw/arc/
  libs-$(CONFIG_CFE)		+= arch/mips/fw/cfe/
@@ -10,7 +10,7 @@
  libs-$(CONFIG_SIBYTE_CFE)	+= arch/mips/sibyte/cfe/
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
-@@ -874,6 +874,9 @@
+@@ -874,6 +874,9 @@ config MIPS_NILE4
  config MIPS_DISABLE_OBSOLETE_IDE
  	bool
  

target/linux/ar71xx/patches-2.6.26/900-mips_multi_machine_support.patch

@@ -113,7 +113,7 @@
 +
 --- a/arch/mips/kernel/Makefile
 +++ b/arch/mips/kernel/Makefile
-@@ -86,6 +86,7 @@
+@@ -86,6 +86,7 @@ obj-$(CONFIG_GPIO_TXX9)		+= gpio_txx9.o
  
  obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
  obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
@@ -123,7 +123,7 @@
  
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
-@@ -880,6 +880,9 @@
+@@ -880,6 +880,9 @@ config MYLOADER
  config SYNC_R4K
  	bool
  

target/linux/ar71xx/patches-2.6.26/901-get_c0_compare_irq_function.patch

@@ -8,7 +8,7 @@
  
  extern asmlinkage void handle_int(void);
  extern asmlinkage void handle_tlbm(void);
-@@ -1464,6 +1465,8 @@
+@@ -1464,6 +1465,8 @@ void __cpuinit per_cpu_trap_init(void)
  	 */
  	if (cpu_has_mips_r2) {
  		cp0_compare_irq = (read_c0_intctl() >> 29) & 7;
@@ -19,7 +19,7 @@
  			cp0_perfcount_irq = -1;
 --- a/include/asm-mips/time.h
 +++ b/include/asm-mips/time.h
-@@ -53,6 +53,7 @@
+@@ -53,6 +53,7 @@ extern int (*perf_irq)(void);
  #ifdef CONFIG_CEVT_R4K
  extern int mips_clockevent_init(void);
  extern unsigned int __weak get_c0_compare_int(void);

target/linux/ar71xx/patches-2.6.26/902-mips_clocksource_init_war.patch

@@ -23,7 +23,7 @@
  static int mips_next_event(unsigned long delta,
                             struct clock_event_device *evt)
  {
-@@ -28,6 +44,7 @@
+@@ -28,6 +44,7 @@ static int mips_next_event(unsigned long
  	cnt = read_c0_count();
  	cnt += delta;
  	write_c0_compare(cnt);
@@ -31,7 +31,7 @@
  	res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0;
  #ifdef CONFIG_MIPS_MT_SMTC
  	evpe(vpflags);
-@@ -187,7 +204,7 @@
+@@ -187,7 +204,7 @@ static int c0_compare_int_usable(void)
  	 */
  	if (c0_compare_int_pending()) {
  		write_c0_compare(read_c0_count());
@@ -40,7 +40,7 @@
  		if (c0_compare_int_pending())
  			return 0;
  	}
-@@ -196,7 +213,7 @@
+@@ -196,7 +213,7 @@ static int c0_compare_int_usable(void)
  		cnt = read_c0_count();
  		cnt += delta;
  		write_c0_compare(cnt);
@@ -49,7 +49,7 @@
  		if ((int)(read_c0_count() - cnt) < 0)
  		    break;
  		/* increase delta if the timer was already expired */
-@@ -205,11 +222,12 @@
+@@ -205,11 +222,12 @@ static int c0_compare_int_usable(void)
  	while ((int)(read_c0_count() - cnt) <= 0)
  		;	/* Wait for expiry  */
  

target/linux/atheros/patches-2.6.26/100-board.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
-@@ -59,6 +59,18 @@
+@@ -59,6 +59,18 @@ config BCM47XX
  	help
  	 Support for BCM47XX based boards
  
@@ -19,7 +19,7 @@
  config MIPS_COBALT
  	bool "Cobalt Server"
  	select CEVT_R4K
-@@ -687,6 +699,7 @@
+@@ -687,6 +699,7 @@ config WR_PPMC
  
  endchoice
  
@@ -29,7 +29,7 @@
  source "arch/mips/jazz/Kconfig"
 --- a/arch/mips/Makefile
 +++ b/arch/mips/Makefile
-@@ -276,6 +276,13 @@
+@@ -276,6 +276,13 @@ libs-$(CONFIG_MIPS_XXS1500)	+= arch/mips
  load-$(CONFIG_MIPS_XXS1500)	+= 0xffffffff80100000
  
  #

target/linux/atheros/patches-2.6.26/110-spiflash.patch

@@ -1,6 +1,6 @@
 --- a/drivers/mtd/devices/Kconfig
 +++ b/drivers/mtd/devices/Kconfig
-@@ -84,6 +84,10 @@
+@@ -84,6 +84,10 @@ config M25PXX_USE_FAST_READ
  	help
  	  This option enables FAST_READ access supported by ST M25Pxx.
  
@@ -13,7 +13,7 @@
  	help
 --- a/drivers/mtd/devices/Makefile
 +++ b/drivers/mtd/devices/Makefile
-@@ -17,3 +17,4 @@
+@@ -17,3 +17,4 @@ obj-$(CONFIG_MTD_LART)		+= lart.o
  obj-$(CONFIG_MTD_BLOCK2MTD)	+= block2mtd.o
  obj-$(CONFIG_MTD_DATAFLASH)	+= mtd_dataflash.o
  obj-$(CONFIG_MTD_M25P80)	+= m25p80.o

target/linux/atheros/patches-2.6.26/120-watchdog.patch

@@ -1,6 +1,6 @@
 --- a/drivers/watchdog/Kconfig
 +++ b/drivers/watchdog/Kconfig
-@@ -683,6 +683,12 @@
+@@ -683,6 +683,12 @@ config TXX9_WDT
  	help
  	  Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
  
@@ -15,7 +15,7 @@
  # POWERPC Architecture
 --- a/drivers/watchdog/Makefile
 +++ b/drivers/watchdog/Makefile
-@@ -97,6 +97,7 @@
+@@ -97,6 +97,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
  obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
  obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
  obj-$(CONFIG_TXX9_WDT) += txx9wdt.o

target/linux/atheros/patches-2.6.26/130-ar2313_ethernet.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/Kconfig
 +++ b/drivers/net/Kconfig
-@@ -367,6 +367,12 @@
+@@ -367,6 +367,12 @@ config AX88796_93CX6
  	help
  	  Select this if your platform comes with an external 93CX6 eeprom.
  
@@ -15,7 +15,7 @@
  	depends on PPC_PMAC && PPC32
 --- a/drivers/net/Makefile
 +++ b/drivers/net/Makefile
-@@ -194,6 +194,7 @@
+@@ -194,6 +194,7 @@ obj-$(CONFIG_EQUALIZER) += eql.o
  obj-$(CONFIG_KORINA) += korina.o
  obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
  obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o

target/linux/atheros/patches-2.6.26/135-ar2313_2.6.26.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/ar2313/ar2313.c
 +++ b/drivers/net/ar2313/ar2313.c
-@@ -291,7 +291,7 @@
+@@ -291,7 +291,7 @@ int __init ar2313_probe(struct platform_
  	sp->mii_bus.write = mdiobus_write;
  	sp->mii_bus.reset = mdiobus_reset;
  	sp->mii_bus.name = "ar2313_eth_mii";

target/linux/atheros/patches-2.6.26/140-redboot_partition_scan.patch

@@ -1,6 +1,6 @@
 --- a/drivers/mtd/redboot.c
 +++ b/drivers/mtd/redboot.c
-@@ -62,31 +62,32 @@
+@@ -62,31 +62,32 @@ static int parse_redboot_partitions(stru
  	static char nullstring[] = "unallocated";
  #endif
  
@@ -40,7 +40,7 @@
  	printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
  	       master->name, offset);
  
-@@ -158,6 +159,11 @@
+@@ -158,6 +159,11 @@ static int parse_redboot_partitions(stru
  	}
  	if (i == numslots) {
  		/* Didn't find it */

target/linux/atheros/patches-2.6.26/150-bridge-printk.patch

@@ -1,6 +1,6 @@
 --- a/net/core/dev.c
 +++ b/net/core/dev.c
-@@ -3786,8 +3786,8 @@
+@@ -3786,8 +3786,8 @@ int register_netdevice(struct net_device
  	/* Fix illegal SG+CSUM combinations. */
  	if ((dev->features & NETIF_F_SG) &&
  	    !(dev->features & NETIF_F_ALL_CSUM)) {
@@ -11,7 +11,7 @@
  		dev->features &= ~NETIF_F_SG;
  	}
  
-@@ -3800,9 +3800,9 @@
+@@ -3800,9 +3800,9 @@ int register_netdevice(struct net_device
  	}
  	if (dev->features & NETIF_F_UFO) {
  		if (!(dev->features & NETIF_F_HW_CSUM)) {

target/linux/atheros/patches-2.6.26/900-cevt_r4k_irq_disable_hazard.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/kernel/cevt-r4k.c
 +++ b/arch/mips/kernel/cevt-r4k.c
-@@ -205,6 +205,7 @@
+@@ -205,6 +205,7 @@ static int c0_compare_int_usable(void)
  	while ((int)(read_c0_count() - cnt) <= 0)
  		;	/* Wait for expiry  */
  

target/linux/atheros/patches-2.6.26/901-get_c0_compare_irq_function.patch

@@ -8,7 +8,7 @@
  
  extern asmlinkage void handle_int(void);
  extern asmlinkage void handle_tlbm(void);
-@@ -1464,6 +1465,8 @@
+@@ -1464,6 +1465,8 @@ void __cpuinit per_cpu_trap_init(void)
  	 */
  	if (cpu_has_mips_r2) {
  		cp0_compare_irq = (read_c0_intctl() >> 29) & 7;
@@ -19,7 +19,7 @@
  			cp0_perfcount_irq = -1;
 --- a/include/asm-mips/time.h
 +++ b/include/asm-mips/time.h
-@@ -53,6 +53,7 @@
+@@ -53,6 +53,7 @@ extern int (*perf_irq)(void);
  #ifdef CONFIG_CEVT_R4K
  extern int mips_clockevent_init(void);
  extern unsigned int __weak get_c0_compare_int(void);
@@ -29,7 +29,7 @@
  {
 --- a/arch/mips/atheros/board.c
 +++ b/arch/mips/atheros/board.c
-@@ -205,6 +205,11 @@
+@@ -265,6 +265,11 @@ void (*board_time_init)(void);
  void __init plat_time_init(void) {
      board_time_init();
  }

target/linux/generic-2.6/patches-2.6.26/001-squashfs.patch

@@ -1,6 +1,6 @@
 --- a/fs/Kconfig
 +++ b/fs/Kconfig
-@@ -1395,6 +1395,71 @@
+@@ -1395,6 +1395,71 @@ config CRAMFS
  
  	  If unsure, say N.
  
@@ -74,7 +74,7 @@
  	depends on BLOCK
 --- a/fs/Makefile
 +++ b/fs/Makefile
-@@ -73,6 +73,7 @@
+@@ -73,6 +73,7 @@ obj-$(CONFIG_JBD)		+= jbd/
  obj-$(CONFIG_JBD2)		+= jbd2/
  obj-$(CONFIG_EXT2_FS)		+= ext2/
  obj-$(CONFIG_CRAMFS)		+= cramfs/
@@ -4128,7 +4128,7 @@
  #include <linux/initrd.h>
  #include <linux/string.h>
  
-@@ -39,6 +40,7 @@
+@@ -39,6 +40,7 @@ static int __init crd_load(int in_fd, in
   * numbers could not be found.
   *
   * We currently check for the following magic numbers:
@@ -4136,7 +4136,7 @@
   * 	minix
   * 	ext2
   *	romfs
-@@ -53,6 +55,7 @@
+@@ -53,6 +55,7 @@ identify_ramdisk_image(int fd, int start
  	struct ext2_super_block *ext2sb;
  	struct romfs_super_block *romfsb;
  	struct cramfs_super *cramfsb;
@@ -4144,7 +4144,7 @@
  	int nblocks = -1;
  	unsigned char *buf;
  
-@@ -64,6 +67,7 @@
+@@ -64,6 +67,7 @@ identify_ramdisk_image(int fd, int start
  	ext2sb = (struct ext2_super_block *) buf;
  	romfsb = (struct romfs_super_block *) buf;
  	cramfsb = (struct cramfs_super *) buf;
@@ -4152,7 +4152,7 @@
  	memset(buf, 0xe5, size);
  
  	/*
-@@ -101,6 +105,15 @@
+@@ -101,6 +105,15 @@ identify_ramdisk_image(int fd, int start
  		goto done;
  	}
  

target/linux/generic-2.6/patches-2.6.26/002-lzma_decompress.patch

@@ -769,7 +769,7 @@
 +}
 --- a/lib/Makefile
 +++ b/lib/Makefile
-@@ -14,7 +14,7 @@
+@@ -14,7 +14,7 @@ lib-$(CONFIG_SMP) += cpumask.o
  lib-y	+= kobject.o kref.o klist.o
  
  obj-y += div64.o sort.o parser.o halfmd4.o debug_locks.o random32.o \

target/linux/generic-2.6/patches-2.6.26/003-squashfs_lzma.patch

@@ -38,7 +38,7 @@
  static void squashfs_put_super(struct super_block *);
  static int squashfs_statfs(struct dentry *, struct kstatfs *);
  static int squashfs_symlink_readpage(struct file *file, struct page *page);
-@@ -64,7 +81,11 @@
+@@ -64,7 +81,11 @@ static int squashfs_get_sb(struct file_s
  			const char *, void *, struct vfsmount *);
  
  
@@ -50,7 +50,7 @@
  
  static struct file_system_type squashfs_fs_type = {
  	.owner = THIS_MODULE,
-@@ -249,6 +270,15 @@
+@@ -249,6 +270,15 @@ SQSH_EXTERN unsigned int squashfs_read_d
  	if (compressed) {
  		int zlib_err;
  
@@ -66,7 +66,7 @@
  		stream.next_in = c_buffer;
  		stream.avail_in = c_byte;
  		stream.next_out = buffer;
-@@ -263,7 +293,7 @@
+@@ -263,7 +293,7 @@ SQSH_EXTERN unsigned int squashfs_read_d
  			bytes = 0;
  		} else
  			bytes = stream.total_out;
@@ -75,7 +75,7 @@
  		up(&msblk->read_data_mutex);
  	}
  
-@@ -2045,15 +2075,19 @@
+@@ -2045,15 +2075,19 @@ static int __init init_squashfs_fs(void)
  	printk(KERN_INFO "squashfs: version 3.0 (2006/03/15) "
  		"Phillip Lougher\n");
  
@@ -95,7 +95,7 @@
  		destroy_inodecache();
  	}
  
-@@ -2064,7 +2098,9 @@
+@@ -2064,7 +2098,9 @@ out:
  
  static void __exit exit_squashfs_fs(void)
  {

target/linux/generic-2.6/patches-2.6.26/004-extra_optimization.patch

@@ -1,6 +1,6 @@
 --- a/Makefile
 +++ b/Makefile
-@@ -537,6 +537,9 @@
+@@ -537,6 +537,9 @@ endif
  NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
  CHECKFLAGS     += $(NOSTDINC_FLAGS)
  

target/linux/generic-2.6/patches-2.6.26/005-squashfs_fix.patch

@@ -8,7 +8,7 @@
  #include <linux/squashfs_fs_sb.h>
  #include <linux/squashfs_fs_i.h>
  #include <linux/buffer_head.h>
-@@ -2125,7 +2126,7 @@
+@@ -2125,7 +2126,7 @@ static void squashfs_destroy_inode(struc
  }
  
  

target/linux/generic-2.6/patches-2.6.26/006-gcc4_inline_fix.patch

@@ -1,6 +1,6 @@
 --- a/include/asm-mips/system.h
 +++ b/include/asm-mips/system.h
-@@ -185,7 +185,7 @@
+@@ -185,7 +185,7 @@ extern __u64 __xchg_u64_unsupported_on_3
     if something tries to do an invalid xchg().  */
  extern void __xchg_called_with_bad_pointer(void);
  

target/linux/generic-2.6/patches-2.6.26/007-samsung_flash.patch

@@ -8,7 +8,7 @@
  
  static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
  static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-@@ -324,12 +325,19 @@
+@@ -324,12 +325,19 @@ struct mtd_info *cfi_cmdset_0002(struct 
  
  		if (extp->MajorVersion != '1' ||
  		    (extp->MinorVersion < '0' || extp->MinorVersion > '4')) {

target/linux/generic-2.6/patches-2.6.26/009-revert_intel_flash_breakage.patch

@@ -1,6 +1,6 @@
 --- a/drivers/mtd/chips/cfi_cmdset_0001.c
 +++ b/drivers/mtd/chips/cfi_cmdset_0001.c
-@@ -1010,7 +1010,7 @@
+@@ -1010,7 +1010,7 @@ static void __xipram xip_enable(struct m
  
  static int __xipram xip_wait_for_operation(
  		struct map_info *map, struct flchip *chip,
@@ -9,7 +9,7 @@
  {
  	struct cfi_private *cfi = map->fldrv_priv;
  	struct cfi_pri_intelext *cfip = cfi->cmdset_priv;
-@@ -1019,7 +1019,7 @@
+@@ -1019,7 +1019,7 @@ static int __xipram xip_wait_for_operati
  	flstate_t oldstate, newstate;
  
         	start = xip_currtime();
@@ -18,7 +18,7 @@
  	if (usec == 0)
  		usec = 500000;
  	done = 0;
-@@ -1129,8 +1129,8 @@
+@@ -1129,8 +1129,8 @@ static int __xipram xip_wait_for_operati
  #define XIP_INVAL_CACHED_RANGE(map, from, size)  \
  	INVALIDATE_CACHED_RANGE(map, from, size)
  
@@ -29,7 +29,7 @@
  
  #else
  
-@@ -1142,65 +1142,65 @@
+@@ -1142,65 +1142,65 @@ static int __xipram xip_wait_for_operati
  static int inval_cache_and_wait_for_operation(
  		struct map_info *map, struct flchip *chip,
  		unsigned long cmd_adr, unsigned long inval_adr, int inval_len,
@@ -130,7 +130,7 @@
  	/* Done and happy. */
   	chip->state = FL_STATUS;
  	return 0;
-@@ -1209,7 +1209,8 @@
+@@ -1209,7 +1209,8 @@ static int inval_cache_and_wait_for_oper
  #endif
  
  #define WAIT_TIMEOUT(map, chip, adr, udelay) \
@@ -140,7 +140,7 @@
  
  
  static int do_point_onechip (struct map_info *map, struct flchip *chip, loff_t adr, size_t len)
-@@ -1443,7 +1444,7 @@
+@@ -1443,7 +1444,7 @@ static int __xipram do_write_oneword(str
  
  	ret = INVAL_CACHE_AND_WAIT(map, chip, adr,
  				   adr, map_bankwidth(map),
@@ -149,7 +149,7 @@
  	if (ret) {
  		xip_enable(map, chip, adr);
  		printk(KERN_ERR "%s: word write error (status timeout)\n", map->name);
-@@ -1683,7 +1684,7 @@
+@@ -1683,7 +1684,7 @@ static int __xipram do_write_buffer(stru
  
  	ret = INVAL_CACHE_AND_WAIT(map, chip, cmd_adr,
  				   initial_adr, initial_len,
@@ -158,7 +158,7 @@
  	if (ret) {
  		map_write(map, CMD(0x70), cmd_adr);
  		chip->state = FL_STATUS;
-@@ -1818,7 +1819,7 @@
+@@ -1818,7 +1819,7 @@ static int __xipram do_erase_oneblock(st
  
  	ret = INVAL_CACHE_AND_WAIT(map, chip, adr,
  				   adr, len,

target/linux/generic-2.6/patches-2.6.26/060-block2mtd_init.patch

@@ -8,7 +8,7 @@
  #include <linux/buffer_head.h>
  #include <linux/mutex.h>
  #include <linux/mount.h>
-@@ -237,10 +238,11 @@
+@@ -237,10 +238,11 @@ static void block2mtd_free_device(struct
  
  
  /* FIXME: ensure that mtd->size % erase_size == 0 */
@@ -21,7 +21,7 @@
  
  	if (!devname)
  		return NULL;
-@@ -279,14 +281,18 @@
+@@ -279,14 +281,18 @@ static struct block2mtd_dev *add_device(
  
  	/* Setup the MTD structure */
  	/* make the name contain the block device in */
@@ -44,7 +44,7 @@
  	dev->mtd.erasesize = erase_size;
  	dev->mtd.writesize = 1;
  	dev->mtd.type = MTD_RAM;
-@@ -299,14 +305,17 @@
+@@ -299,14 +305,17 @@ static struct block2mtd_dev *add_device(
  	dev->mtd.priv = dev;
  	dev->mtd.owner = THIS_MODULE;
  
@@ -65,7 +65,7 @@
  	return dev;
  
  devinit_err:
-@@ -379,9 +388,9 @@
+@@ -379,9 +388,9 @@ static char block2mtd_paramline[80 + 12]
  
  static int block2mtd_setup2(const char *val)
  {
@@ -77,7 +77,7 @@
  	char *name;
  	size_t erase_size = PAGE_SIZE;
  	int i, ret;
-@@ -392,7 +401,7 @@
+@@ -392,7 +401,7 @@ static int block2mtd_setup2(const char *
  	strcpy(str, val);
  	kill_final_newline(str);
  
@@ -86,7 +86,7 @@
  		token[i] = strsep(&str, ",");
  
  	if (str)
-@@ -411,8 +420,10 @@
+@@ -411,8 +420,10 @@ static int block2mtd_setup2(const char *
  			parse_err("illegal erase size");
  		}
  	}
@@ -98,7 +98,7 @@
  
  	return 0;
  }
-@@ -446,7 +457,7 @@
+@@ -446,7 +457,7 @@ static int block2mtd_setup(const char *v
  
  
  module_param_call(block2mtd, block2mtd_setup, NULL, NULL, 0200);

target/linux/generic-2.6/patches-2.6.26/065-rootfs_split.patch

@@ -1,6 +1,6 @@
 --- a/drivers/mtd/Kconfig
 +++ b/drivers/mtd/Kconfig
-@@ -47,6 +47,16 @@
+@@ -47,6 +47,16 @@ config MTD_PARTITIONS
  	  devices. Partitioning on NFTL 'devices' is a different - that's the
  	  'normal' form of partitioning used on a block device.
  
@@ -28,7 +28,7 @@
  
  /* Our partition linked list */
  static LIST_HEAD(mtd_partitions);
-@@ -39,7 +41,7 @@
+@@ -39,7 +41,7 @@ struct mtd_part {
   * the pointer to that structure with this macro.
   */
  #define PART(x)  ((struct mtd_part *)(x))
@@ -37,7 +37,7 @@
  
  /*
   * MTD methods which simply translate the effective address and pass through
-@@ -322,6 +324,316 @@
+@@ -322,6 +324,316 @@ int del_mtd_partitions(struct mtd_info *
  	return 0;
  }
  
@@ -354,7 +354,7 @@
  /*
   * This function, given a master MTD object and a partition table, creates
   * and registers slave MTD objects which are bound to the master according to
-@@ -334,171 +646,31 @@
+@@ -334,171 +646,31 @@ int add_mtd_partitions(struct mtd_info *
  		       int nbparts)
  {
  	struct mtd_part *slave;
@@ -547,7 +547,7 @@
  		}
  	}
  
-@@ -574,6 +746,32 @@
+@@ -574,6 +746,32 @@ int parse_mtd_partitions(struct mtd_info
  	return ret;
  }
  
@@ -582,7 +582,7 @@
  EXPORT_SYMBOL_GPL(deregister_mtd_parser);
 --- a/drivers/mtd/devices/block2mtd.c
 +++ b/drivers/mtd/devices/block2mtd.c
-@@ -34,6 +34,8 @@
+@@ -34,6 +34,8 @@ struct block2mtd_dev {
  	struct block_device *blkdev;
  	struct mtd_info mtd;
  	struct mutex write_mutex;
@@ -591,7 +591,7 @@
  };
  
  
-@@ -86,6 +88,12 @@
+@@ -86,6 +88,12 @@ static int block2mtd_erase(struct mtd_in
  	size_t len = instr->len;
  	int err;
  
@@ -604,7 +604,7 @@
  	instr->state = MTD_ERASING;
  	mutex_lock(&dev->write_mutex);
  	err = _block2mtd_erase(dev, from, len);
-@@ -98,6 +106,10 @@
+@@ -98,6 +106,10 @@ static int block2mtd_erase(struct mtd_in
  
  	instr->state = MTD_ERASE_DONE;
  	mtd_erase_callback(instr);
@@ -615,7 +615,7 @@
  	return err;
  }
  
-@@ -109,10 +121,14 @@
+@@ -109,10 +121,14 @@ static int block2mtd_read(struct mtd_inf
  	struct page *page;
  	int index = from >> PAGE_SHIFT;
  	int offset = from & (PAGE_SIZE-1);
@@ -633,7 +633,7 @@
  	if (from + len > mtd->size)
  		len = mtd->size - from;
  
-@@ -127,10 +143,14 @@
+@@ -127,10 +143,14 @@ static int block2mtd_read(struct mtd_inf
  		len = len - cpylen;
  
  		page = page_read(dev->blkdev->bd_inode->i_mapping, index);
@@ -652,7 +652,7 @@
  
  		memcpy(buf, page_address(page) + offset, cpylen);
  		page_cache_release(page);
-@@ -141,7 +161,10 @@
+@@ -141,7 +161,10 @@ static int block2mtd_read(struct mtd_inf
  		offset = 0;
  		index++;
  	}
@@ -664,7 +664,7 @@
  }
  
  
-@@ -193,12 +216,22 @@
+@@ -193,12 +216,22 @@ static int block2mtd_write(struct mtd_in
  		size_t *retlen, const u_char *buf)
  {
  	struct block2mtd_dev *dev = mtd->priv;
@@ -691,7 +691,7 @@
  	if (to + len > mtd->size)
  		len = mtd->size - to;
  
-@@ -207,6 +240,9 @@
+@@ -207,6 +240,9 @@ static int block2mtd_write(struct mtd_in
  	mutex_unlock(&dev->write_mutex);
  	if (err > 0)
  		err = 0;
@@ -701,7 +701,7 @@
  	return err;
  }
  
-@@ -215,51 +251,29 @@
+@@ -215,51 +251,29 @@ static int block2mtd_write(struct mtd_in
  static void block2mtd_sync(struct mtd_info *mtd)
  {
  	struct block2mtd_dev *dev = mtd->priv;
@@ -761,7 +761,7 @@
  		if (devt) {
  			bdev = open_by_devnum(devt, FMODE_WRITE | FMODE_READ);
  		}
-@@ -267,17 +281,96 @@
+@@ -267,17 +281,96 @@ static struct block2mtd_dev *add_device(
  #endif
  
  	if (IS_ERR(bdev)) {
@@ -861,7 +861,7 @@
  
  	/* Setup the MTD structure */
  	/* make the name contain the block device in */
-@@ -304,6 +397,7 @@
+@@ -304,6 +397,7 @@ static struct block2mtd_dev *add_device(
  	dev->mtd.read = block2mtd_read;
  	dev->mtd.priv = dev;
  	dev->mtd.owner = THIS_MODULE;
@@ -879,7 +879,7 @@
  
  #include <asm/uaccess.h>
  
-@@ -756,6 +757,13 @@
+@@ -756,6 +757,13 @@ static int mtd_ioctl(struct inode *inode
  		file->f_pos = 0;
  		break;
  	}
@@ -895,7 +895,7 @@
  		ret = -ENOTTY;
 --- a/include/linux/mtd/mtd.h
 +++ b/include/linux/mtd/mtd.h
-@@ -98,6 +98,7 @@
+@@ -98,6 +98,7 @@ struct mtd_oob_ops {
  	uint8_t		*oobbuf;
  };
  
@@ -903,7 +903,7 @@
  struct mtd_info {
  	u_char type;
  	u_int32_t flags;
-@@ -213,6 +214,9 @@
+@@ -213,6 +214,9 @@ struct mtd_info {
  	struct module *owner;
  	int usecount;
  
@@ -923,7 +923,7 @@
  struct mtd_partition {
  	char *name;			/* identifier string */
  	u_int32_t size;			/* partition size */
-@@ -43,6 +44,7 @@
+@@ -43,6 +44,7 @@ struct mtd_partition {
  	u_int32_t mask_flags;		/* master MTD flags to mask out for this partition */
  	struct nand_ecclayout *ecclayout;	/* out of band layout for this partition (NAND only)*/
  	struct mtd_info **mtdp;		/* pointer to store the MTD object */
@@ -931,7 +931,7 @@
  };
  
  #define MTDPART_OFS_NXTBLK	(-2)
-@@ -52,6 +54,7 @@
+@@ -52,6 +54,7 @@ struct mtd_partition {
  
  int add_mtd_partitions(struct mtd_info *, const struct mtd_partition *, int);
  int del_mtd_partitions(struct mtd_info *);
@@ -941,7 +941,7 @@
   * Functions dealing with the various ways of partitioning the space
 --- a/include/mtd/mtd-abi.h
 +++ b/include/mtd/mtd-abi.h
-@@ -95,6 +95,7 @@
+@@ -95,6 +95,7 @@ struct otp_info {
  #define ECCGETLAYOUT		_IOR('M', 17, struct nand_ecclayout)
  #define ECCGETSTATS		_IOR('M', 18, struct mtd_ecc_stats)
  #define MTDFILEMODE		_IO('M', 19)

target/linux/generic-2.6/patches-2.6.26/070-redboot_space.patch

@@ -1,6 +1,6 @@
 --- a/drivers/mtd/redboot.c
 +++ b/drivers/mtd/redboot.c
-@@ -251,14 +251,21 @@
+@@ -251,14 +251,21 @@ static int parse_redboot_partitions(stru
  #endif
  		names += strlen(names)+1;
  

target/linux/generic-2.6/patches-2.6.26/071-redboot_boardconfig.patch

@@ -9,7 +9,7 @@
  struct fis_image_desc {
      unsigned char name[16];      // Null terminated name
      uint32_t	  flash_base;    // Address within FLASH of image
-@@ -43,6 +45,7 @@
+@@ -43,6 +45,7 @@ static int parse_redboot_partitions(stru
                               struct mtd_partition **pparts,
                               unsigned long fis_origin)
  {
@@ -17,7 +17,7 @@
  	int nrparts = 0;
  	struct fis_image_desc *buf;
  	struct mtd_partition *parts;
-@@ -211,14 +214,14 @@
+@@ -211,14 +214,14 @@ static int parse_redboot_partitions(stru
  		}
  	}
  #endif
@@ -34,7 +34,7 @@
  #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
  	if (nulllen > 0) {
  		strcpy(nullname, nullstring);
-@@ -237,6 +240,8 @@
+@@ -237,6 +240,8 @@ static int parse_redboot_partitions(stru
  	}
  #endif
  	for ( ; i<nrparts; i++) {
@@ -43,7 +43,7 @@
  		parts[i].size = fl->img->size;
  		parts[i].offset = fl->img->flash_base;
  		parts[i].name = names;
-@@ -270,6 +275,14 @@
+@@ -270,6 +275,14 @@ static int parse_redboot_partitions(stru
  		fl = fl->next;
  		kfree(tmp_fl);
  	}

target/linux/generic-2.6/patches-2.6.26/080-mtd_plat_nand_chip_fixup.patch

@@ -1,6 +1,6 @@
 --- a/include/linux/mtd/nand.h
 +++ b/include/linux/mtd/nand.h
-@@ -573,6 +573,7 @@
+@@ -573,6 +573,7 @@ struct platform_nand_chip {
  	int			chip_delay;
  	unsigned int		options;
  	const char		**part_probe_types;
@@ -10,7 +10,7 @@
  
 --- a/drivers/mtd/nand/plat_nand.c
 +++ b/drivers/mtd/nand/plat_nand.c
-@@ -71,7 +71,18 @@
+@@ -71,7 +71,18 @@ static int __init plat_nand_probe(struct
  	platform_set_drvdata(pdev, data);
  
  	/* Scan to find existance of the device */

target/linux/generic-2.6/patches-2.6.26/100-netfilter_layer7_2.17.patch

@@ -1,6 +1,6 @@
 --- a/net/netfilter/Kconfig
 +++ b/net/netfilter/Kconfig
-@@ -749,6 +749,27 @@
+@@ -749,6 +749,27 @@ config NETFILTER_XT_MATCH_STATE
  
  	  To compile it as a module, choose M here.  If unsure, say N.
  
@@ -30,7 +30,7 @@
  	depends on NETFILTER_XTABLES
 --- a/net/netfilter/Makefile
 +++ b/net/netfilter/Makefile
-@@ -78,6 +78,7 @@
+@@ -78,6 +78,7 @@ obj-$(CONFIG_NETFILTER_XT_MATCH_RATEEST)
  obj-$(CONFIG_NETFILTER_XT_MATCH_REALM) += xt_realm.o
  obj-$(CONFIG_NETFILTER_XT_MATCH_SCTP) += xt_sctp.o
  obj-$(CONFIG_NETFILTER_XT_MATCH_STATE) += xt_state.o
@@ -2027,7 +2027,7 @@
 +}
 --- a/net/netfilter/nf_conntrack_core.c
 +++ b/net/netfilter/nf_conntrack_core.c
-@@ -205,6 +205,14 @@
+@@ -205,6 +205,14 @@ destroy_conntrack(struct nf_conntrack *n
  	 * too. */
  	nf_ct_remove_expectations(ct);
  
@@ -2044,7 +2044,7 @@
  		BUG_ON(hlist_unhashed(&ct->tuplehash[IP_CT_DIR_ORIGINAL].hnode));
 --- a/net/netfilter/nf_conntrack_standalone.c
 +++ b/net/netfilter/nf_conntrack_standalone.c
-@@ -174,7 +174,12 @@
+@@ -174,7 +174,12 @@ static int ct_seq_show(struct seq_file *
  		return -ENOSPC;
  #endif
  
@@ -2060,7 +2060,7 @@
  	return 0;
 --- a/include/net/netfilter/nf_conntrack.h
 +++ b/include/net/netfilter/nf_conntrack.h
-@@ -124,6 +124,22 @@
+@@ -124,6 +124,22 @@ struct nf_conn
  	u_int32_t secmark;
  #endif
  

target/linux/generic-2.6/patches-2.6.26/101-netfilter_layer7_pktmatch.patch

@@ -1,6 +1,6 @@
 --- a/include/linux/netfilter/xt_layer7.h
 +++ b/include/linux/netfilter/xt_layer7.h
-@@ -8,6 +8,7 @@
+@@ -8,6 +8,7 @@ struct xt_layer7_info {
      char protocol[MAX_PROTOCOL_LEN];
      char pattern[MAX_PATTERN_LEN];
      u_int8_t invert;
@@ -10,7 +10,7 @@
  #endif /* _XT_LAYER7_H */
 --- a/net/netfilter/xt_layer7.c
 +++ b/net/netfilter/xt_layer7.c
-@@ -297,34 +297,36 @@
+@@ -297,34 +297,36 @@ static int match_no_append(struct nf_con
  }
  
  /* add the new app data to the conntrack.  Return number of bytes added. */
@@ -60,7 +60,7 @@
  	return length;
  }
  
-@@ -411,7 +413,7 @@
+@@ -411,7 +413,7 @@ match(const struct sk_buff *skbin,
  	const struct xt_layer7_info * info = matchinfo;
  	enum ip_conntrack_info master_ctinfo, ctinfo;
  	struct nf_conn *master_conntrack, *conntrack;
@@ -69,7 +69,7 @@
  	unsigned int pattern_result, appdatalen;
  	regexp * comppattern;
  
-@@ -439,8 +441,8 @@
+@@ -439,8 +441,8 @@ match(const struct sk_buff *skbin,
  		master_conntrack = master_ct(master_conntrack);
  
  	/* if we've classified it or seen too many packets */
@@ -80,7 +80,7 @@
  
  		pattern_result = match_no_append(conntrack, master_conntrack,
  						 ctinfo, master_ctinfo, info);
-@@ -473,6 +475,25 @@
+@@ -473,6 +475,25 @@ match(const struct sk_buff *skbin,
  	/* the return value gets checked later, when we're ready to use it */
  	comppattern = compile_and_cache(info->pattern, info->protocol);
  

target/linux/generic-2.6/patches-2.6.26/110-ipp2p_0.8.1rc1.patch

@@ -893,7 +893,7 @@
 +
 --- a/net/ipv4/netfilter/Kconfig
 +++ b/net/ipv4/netfilter/Kconfig
-@@ -57,6 +57,12 @@
+@@ -57,6 +57,12 @@ config IP_NF_IPTABLES
  	  To compile it as a module, choose M here.  If unsure, say N.
  
  # The matches.
@@ -908,7 +908,7 @@
  	depends on IP_NF_IPTABLES
 --- a/net/ipv4/netfilter/Makefile
 +++ b/net/ipv4/netfilter/Makefile
-@@ -50,6 +50,8 @@
+@@ -50,6 +50,8 @@ obj-$(CONFIG_IP_NF_MATCH_ECN) += ipt_ecn
  obj-$(CONFIG_IP_NF_MATCH_RECENT) += ipt_recent.o
  obj-$(CONFIG_IP_NF_MATCH_TTL) += ipt_ttl.o
  

target/linux/generic-2.6/patches-2.6.26/130-netfilter_ipset.patch

@@ -7517,7 +7517,7 @@
 +module_exit(ipt_SET_fini);
 --- a/net/ipv4/netfilter/Kconfig
 +++ b/net/ipv4/netfilter/Kconfig
-@@ -401,5 +401,122 @@
+@@ -401,5 +401,122 @@ config IP_NF_ARP_MANGLE
  	  Allows altering the ARP packet payload: source and destination
  	  hardware and network addresses.
  
@@ -7642,7 +7642,7 @@
  
 --- a/net/ipv4/netfilter/Makefile
 +++ b/net/ipv4/netfilter/Makefile
-@@ -49,6 +49,7 @@
+@@ -49,6 +49,7 @@ obj-$(CONFIG_IP_NF_MATCH_AH) += ipt_ah.o
  obj-$(CONFIG_IP_NF_MATCH_ECN) += ipt_ecn.o
  obj-$(CONFIG_IP_NF_MATCH_RECENT) += ipt_recent.o
  obj-$(CONFIG_IP_NF_MATCH_TTL) += ipt_ttl.o
@@ -7650,7 +7650,7 @@
  
  obj-$(CONFIG_IP_NF_MATCH_IPP2P) += ipt_ipp2p.o
  
-@@ -62,6 +63,18 @@
+@@ -62,6 +63,18 @@ obj-$(CONFIG_IP_NF_TARGET_REDIRECT) += i
  obj-$(CONFIG_IP_NF_TARGET_REJECT) += ipt_REJECT.o
  obj-$(CONFIG_IP_NF_TARGET_TTL) += ipt_TTL.o
  obj-$(CONFIG_IP_NF_TARGET_ULOG) += ipt_ULOG.o

target/linux/generic-2.6/patches-2.6.26/140-netfilter_time.patch

@@ -204,7 +204,7 @@
 +}
 --- a/net/ipv4/netfilter/Kconfig
 +++ b/net/ipv4/netfilter/Kconfig
-@@ -63,6 +63,22 @@
+@@ -63,6 +63,22 @@ config IP_NF_MATCH_IPP2P
  	help
  	  Module for matching traffic of various Peer-to-Peer applications
  
@@ -229,7 +229,7 @@
  	depends on IP_NF_IPTABLES
 --- a/net/ipv4/netfilter/Makefile
 +++ b/net/ipv4/netfilter/Makefile
-@@ -50,6 +50,7 @@
+@@ -50,6 +50,7 @@ obj-$(CONFIG_IP_NF_MATCH_ECN) += ipt_ecn
  obj-$(CONFIG_IP_NF_MATCH_RECENT) += ipt_recent.o
  obj-$(CONFIG_IP_NF_MATCH_TTL) += ipt_ttl.o
  obj-$(CONFIG_IP_NF_MATCH_SET) += ipt_set.o

target/linux/generic-2.6/patches-2.6.26/150-netfilter_imq.patch

@@ -477,7 +477,7 @@
 +
 --- a/drivers/net/Kconfig
 +++ b/drivers/net/Kconfig
-@@ -117,6 +117,129 @@
+@@ -117,6 +117,129 @@ config EQUALIZER
  	  To compile this driver as a module, choose M here: the module
  	  will be called eql.  If unsure, say N.
  
@@ -609,7 +609,7 @@
  	select CRC32
 --- a/drivers/net/Makefile
 +++ b/drivers/net/Makefile
-@@ -142,6 +142,7 @@
+@@ -142,6 +142,7 @@ obj-$(CONFIG_SLHC) += slhc.o
  obj-$(CONFIG_XEN_NETDEV_FRONTEND) += xen-netfront.o
  
  obj-$(CONFIG_DUMMY) += dummy.o
@@ -653,7 +653,7 @@
 +#endif /* _IP6T_IMQ_H */
 --- a/include/linux/skbuff.h
 +++ b/include/linux/skbuff.h
-@@ -300,6 +300,10 @@
+@@ -300,6 +300,10 @@ struct sk_buff {
  	struct nf_conntrack	*nfct;
  	struct sk_buff		*nfct_reasm;
  #endif
@@ -664,7 +664,7 @@
  #ifdef CONFIG_BRIDGE_NETFILTER
  	struct nf_bridge_info	*nf_bridge;
  #endif
-@@ -1633,6 +1637,10 @@
+@@ -1633,6 +1637,10 @@ static inline void __nf_copy(struct sk_b
  	dst->nfct_reasm = src->nfct_reasm;
  	nf_conntrack_get_reasm(src->nfct_reasm);
  #endif
@@ -687,7 +687,7 @@
  #include <linux/proc_fs.h>
  #include <linux/seq_file.h>
  #include <linux/stat.h>
-@@ -1569,7 +1572,11 @@
+@@ -1569,7 +1572,11 @@ static int dev_gso_segment(struct sk_buf
  int dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
  {
  	if (likely(!skb->next)) {
@@ -774,7 +774,7 @@
 +MODULE_LICENSE("GPL");
 --- a/net/ipv4/netfilter/Kconfig
 +++ b/net/ipv4/netfilter/Kconfig
-@@ -145,6 +145,17 @@
+@@ -145,6 +145,17 @@ config IP_NF_FILTER
  
  	  To compile it as a module, choose M here.  If unsure, say N.
  
@@ -794,7 +794,7 @@
  	depends on IP_NF_FILTER
 --- a/net/ipv4/netfilter/Makefile
 +++ b/net/ipv4/netfilter/Makefile
-@@ -58,6 +58,7 @@
+@@ -58,6 +58,7 @@ obj-$(CONFIG_IP_NF_MATCH_IPP2P) += ipt_i
  obj-$(CONFIG_IP_NF_TARGET_CLUSTERIP) += ipt_CLUSTERIP.o
  obj-$(CONFIG_IP_NF_TARGET_ECN) += ipt_ECN.o
  obj-$(CONFIG_IP_NF_TARGET_LOG) += ipt_LOG.o
@@ -876,7 +876,7 @@
 +MODULE_LICENSE("GPL");
 --- a/net/ipv6/netfilter/Kconfig
 +++ b/net/ipv6/netfilter/Kconfig
-@@ -179,6 +179,15 @@
+@@ -179,6 +179,15 @@ config IP6_NF_MANGLE
  
  	  To compile it as a module, choose M here.  If unsure, say N.
  
@@ -904,7 +904,7 @@
  
 --- a/net/sched/sch_generic.c
 +++ b/net/sched/sch_generic.c
-@@ -203,6 +203,7 @@
+@@ -203,6 +203,7 @@ void __qdisc_run(struct net_device *dev)
  
  	clear_bit(__LINK_STATE_QDISC_RUNNING, &dev->state);
  }

target/linux/generic-2.6/patches-2.6.26/170-netfilter_chaostables_0.8.patch

@@ -95,7 +95,7 @@
 +#define xt_request_find_match xt_request_find_match_lo
 --- a/net/netfilter/Kconfig
 +++ b/net/netfilter/Kconfig
-@@ -288,6 +288,14 @@
+@@ -288,6 +288,14 @@ config NETFILTER_XTABLES
  
  # alphabetically ordered list of targets
  
@@ -110,7 +110,7 @@
  config NETFILTER_XT_TARGET_CLASSIFY
  	tristate '"CLASSIFY" target support'
  	depends on NETFILTER_XTABLES
-@@ -317,6 +325,14 @@
+@@ -317,6 +325,14 @@ config NETFILTER_XT_TARGET_CONNMARK
  	  <file:Documentation/kbuild/modules.txt>.  The module will be called
  	  ipt_CONNMARK.ko.  If unsure, say `N'.
  
@@ -125,7 +125,7 @@
  config NETFILTER_XT_TARGET_DSCP
  	tristate '"DSCP" and "TOS" target support'
  	depends on NETFILTER_XTABLES
-@@ -653,6 +669,14 @@
+@@ -653,6 +669,14 @@ config NETFILTER_XT_MATCH_POLICY
  
  	  To compile it as a module, choose M here.  If unsure, say N.
  
@@ -142,7 +142,7 @@
  	depends on NETFILTER_XTABLES
 --- a/net/netfilter/Makefile
 +++ b/net/netfilter/Makefile
-@@ -51,6 +51,8 @@
+@@ -51,6 +51,8 @@ obj-$(CONFIG_NETFILTER_XT_TARGET_SECMARK
  obj-$(CONFIG_NETFILTER_XT_TARGET_TCPMSS) += xt_TCPMSS.o
  obj-$(CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP) += xt_TCPOPTSTRIP.o
  obj-$(CONFIG_NETFILTER_XT_TARGET_TRACE) += xt_TRACE.o
@@ -151,7 +151,7 @@
  
  # matches
  obj-$(CONFIG_NETFILTER_XT_MATCH_COMMENT) += xt_comment.o
-@@ -84,3 +86,4 @@
+@@ -84,3 +86,4 @@ obj-$(CONFIG_NETFILTER_XT_MATCH_STRING) 
  obj-$(CONFIG_NETFILTER_XT_MATCH_TCPMSS) += xt_tcpmss.o
  obj-$(CONFIG_NETFILTER_XT_MATCH_TIME) += xt_time.o
  obj-$(CONFIG_NETFILTER_XT_MATCH_U32) += xt_u32.o
@@ -833,7 +833,7 @@
 +MODULE_ALIAS("ipt_portscan");
 --- a/drivers/char/random.c
 +++ b/drivers/char/random.c
-@@ -1554,6 +1554,8 @@
+@@ -1554,6 +1554,8 @@ __u32 secure_tcp_sequence_number(__be32 
  	return seq;
  }
  

target/linux/generic-2.6/patches-2.6.26/171-netfilter_tarpit.patch

@@ -1,6 +1,6 @@
 --- a/net/netfilter/Kconfig
 +++ b/net/netfilter/Kconfig
-@@ -449,6 +449,23 @@
+@@ -449,6 +449,23 @@ config NETFILTER_XT_TARGET_CONNSECMARK
  
  	  To compile it as a module, choose M here.  If unsure, say N.
  
@@ -26,7 +26,7 @@
  	depends on NETFILTER_XTABLES && (IPV6 || IPV6=n)
 --- a/net/netfilter/Makefile
 +++ b/net/netfilter/Makefile
-@@ -48,6 +48,7 @@
+@@ -48,6 +48,7 @@ obj-$(CONFIG_NETFILTER_XT_TARGET_NFQUEUE
  obj-$(CONFIG_NETFILTER_XT_TARGET_NOTRACK) += xt_NOTRACK.o
  obj-$(CONFIG_NETFILTER_XT_TARGET_RATEEST) += xt_RATEEST.o
  obj-$(CONFIG_NETFILTER_XT_TARGET_SECMARK) += xt_SECMARK.o

target/linux/generic-2.6/patches-2.6.26/180-netfilter_depends.patch

@@ -1,6 +1,6 @@
 --- a/net/netfilter/Kconfig
 +++ b/net/netfilter/Kconfig
-@@ -157,7 +157,7 @@
+@@ -157,7 +157,7 @@ config NF_CONNTRACK_FTP
  
  config NF_CONNTRACK_H323
  	tristate "H.323 protocol support"
@@ -9,7 +9,7 @@
  	depends on NETFILTER_ADVANCED
  	help
  	  H.323 is a VoIP signalling protocol from ITU-T. As one of the most
-@@ -468,7 +468,7 @@
+@@ -468,7 +468,7 @@ config NETFILTER_XT_TARGET_TARPIT
  
  config NETFILTER_XT_TARGET_TCPMSS
  	tristate '"TCPMSS" target support'

target/linux/generic-2.6/patches-2.6.26/190-netfilter_rtsp.patch

@@ -294,7 +294,7 @@
 +#endif /* _NETFILTER_MIME_H */
 --- a/net/ipv4/netfilter/Makefile
 +++ b/net/ipv4/netfilter/Makefile
-@@ -23,6 +23,7 @@
+@@ -23,6 +23,7 @@ obj-$(CONFIG_NF_NAT_AMANDA) += nf_nat_am
  obj-$(CONFIG_NF_NAT_FTP) += nf_nat_ftp.o
  obj-$(CONFIG_NF_NAT_H323) += nf_nat_h323.o
  obj-$(CONFIG_NF_NAT_IRC) += nf_nat_irc.o
@@ -304,7 +304,7 @@
  obj-$(CONFIG_NF_NAT_SNMP_BASIC) += nf_nat_snmp_basic.o
 --- a/net/netfilter/Kconfig
 +++ b/net/netfilter/Kconfig
-@@ -270,6 +270,16 @@
+@@ -270,6 +270,16 @@ config NF_CONNTRACK_TFTP
  
  	  To compile it as a module, choose M here.  If unsure, say N.
  
@@ -323,7 +323,7 @@
  	depends on NF_CONNTRACK
 --- a/net/netfilter/Makefile
 +++ b/net/netfilter/Makefile
-@@ -33,6 +33,7 @@
+@@ -33,6 +33,7 @@ obj-$(CONFIG_NF_CONNTRACK_PPTP) += nf_co
  obj-$(CONFIG_NF_CONNTRACK_SANE) += nf_conntrack_sane.o
  obj-$(CONFIG_NF_CONNTRACK_SIP) += nf_conntrack_sip.o
  obj-$(CONFIG_NF_CONNTRACK_TFTP) += nf_conntrack_tftp.o
@@ -333,7 +333,7 @@
  obj-$(CONFIG_NETFILTER_XTABLES) += x_tables.o xt_tcpudp.o
 --- a/net/ipv4/netfilter/Kconfig
 +++ b/net/ipv4/netfilter/Kconfig
-@@ -304,6 +304,11 @@
+@@ -304,6 +304,11 @@ config NF_NAT_IRC
  	depends on IP_NF_IPTABLES && NF_CONNTRACK && NF_NAT
  	default NF_NAT && NF_CONNTRACK_IRC
  

target/linux/generic-2.6/patches-2.6.26/200-sched_esfq.patch

@@ -1,6 +1,6 @@
 --- a/include/linux/pkt_sched.h
 +++ b/include/linux/pkt_sched.h
-@@ -162,8 +162,37 @@
+@@ -162,8 +162,37 @@ struct tc_sfq_xstats
   *
   *	The only reason for this is efficiency, it is possible
   *	to change these parameters in compile time.
@@ -40,7 +40,7 @@
  enum
 --- a/net/sched/Kconfig
 +++ b/net/sched/Kconfig
-@@ -128,6 +128,37 @@
+@@ -128,6 +128,37 @@ config NET_SCH_SFQ
  	  To compile this code as a module, choose M here: the
  	  module will be called sch_sfq.
  
@@ -80,7 +80,7 @@
  	---help---
 --- a/net/sched/Makefile
 +++ b/net/sched/Makefile
-@@ -23,6 +23,7 @@
+@@ -23,6 +23,7 @@ obj-$(CONFIG_NET_SCH_GRED)	+= sch_gred.o
  obj-$(CONFIG_NET_SCH_INGRESS)	+= sch_ingress.o 
  obj-$(CONFIG_NET_SCH_DSMARK)	+= sch_dsmark.o
  obj-$(CONFIG_NET_SCH_SFQ)	+= sch_sfq.o

target/linux/generic-2.6/patches-2.6.26/202-mips-freestanding.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/Makefile
 +++ b/arch/mips/Makefile
-@@ -597,6 +597,9 @@
+@@ -597,6 +597,9 @@ core-$(CONFIG_TOSHIBA_RBTX4938) += arch/
  cflags-$(CONFIG_TOSHIBA_RBTX4938) += -Iinclude/asm-mips/mach-tx49xx
  load-$(CONFIG_TOSHIBA_RBTX4938) += 0xffffffff80100000
  

target/linux/generic-2.6/patches-2.6.26/204-jffs2_eofdetect.patch

@@ -1,6 +1,6 @@
 --- a/fs/jffs2/build.c
 +++ b/fs/jffs2/build.c
-@@ -111,6 +111,17 @@
+@@ -111,6 +111,17 @@ static int jffs2_build_filesystem(struct
  	dbg_fsbuild("scanned flash completely\n");
  	jffs2_dbg_dump_block_lists_nolock(c);
  
@@ -20,7 +20,7 @@
  	/* Now scan the directory tree, increasing nlink according to every dirent found. */
 --- a/fs/jffs2/scan.c
 +++ b/fs/jffs2/scan.c
-@@ -72,7 +72,7 @@
+@@ -72,7 +72,7 @@ static int file_dirty(struct jffs2_sb_in
  		return ret;
  	if ((ret = jffs2_scan_dirty_space(c, jeb, jeb->free_size)))
  		return ret;
@@ -29,7 +29,7 @@
  	   think it's recoverable now. */
  	jeb->dirty_size += jeb->wasted_size;
  	c->dirty_size += jeb->wasted_size;
-@@ -144,8 +144,11 @@
+@@ -144,8 +144,11 @@ int jffs2_scan_medium(struct jffs2_sb_in
  		/* reset summary info for next eraseblock scan */
  		jffs2_sum_reset_collected(s);
  
@@ -43,7 +43,7 @@
  
  		if (ret < 0)
  			goto out;
-@@ -400,7 +403,7 @@
+@@ -400,7 +403,7 @@ static int jffs2_scan_xref_node(struct j
  	if (!ref)
  		return -ENOMEM;
  
@@ -52,7 +52,7 @@
  	 * and AFTER xattr_ref is marked as a dead xref,
  	 * ref->xid is used to store 32bit xid, xd is not used
  	 * ref->ino is used to store 32bit inode-number, ic is not used
-@@ -473,7 +476,7 @@
+@@ -473,7 +476,7 @@ static int jffs2_scan_eraseblock (struct
  		struct jffs2_sum_marker *sm;
  		void *sumptr = NULL;
  		uint32_t sumlen;
@@ -61,7 +61,7 @@
  		if (!buf_size) {
  			/* XIP case. Just look, point at the summary if it's there */
  			sm = (void *)buf + c->sector_size - sizeof(*sm);
-@@ -489,9 +492,9 @@
+@@ -489,9 +492,9 @@ static int jffs2_scan_eraseblock (struct
  				buf_len = sizeof(*sm);
  
  			/* Read as much as we want into the _end_ of the preallocated buffer */
@@ -73,7 +73,7 @@
  			if (err)
  				return err;
  
-@@ -510,9 +513,9 @@
+@@ -510,9 +513,9 @@ static int jffs2_scan_eraseblock (struct
  				}
  				if (buf_len < sumlen) {
  					/* Need to read more so that the entire summary node is present */
@@ -85,7 +85,7 @@
  					if (err)
  						return err;
  				}
-@@ -525,7 +528,7 @@
+@@ -525,7 +528,7 @@ static int jffs2_scan_eraseblock (struct
  
  			if (buf_size && sumlen > buf_size)
  				kfree(sumptr);
@@ -94,7 +94,7 @@
  			   If it returns positive, that's a block classification
  			   (i.e. BLK_STATE_xxx) so return that too.
  			   If it returns zero, fall through to full scan. */
-@@ -546,6 +549,17 @@
+@@ -546,6 +549,17 @@ static int jffs2_scan_eraseblock (struct
  			return err;
  	}
  
@@ -112,7 +112,7 @@
  	/* We temporarily use 'ofs' as a pointer into the buffer/jeb */
  	ofs = 0;
  
-@@ -671,7 +685,7 @@
+@@ -671,7 +685,7 @@ scan_more:
  				scan_end = buf_len;
  				goto more_empty;
  			}
@@ -121,7 +121,7 @@
  			/* See how much more there is to read in this eraseblock... */
  			buf_len = min_t(uint32_t, buf_size, jeb->offset + c->sector_size - ofs);
  			if (!buf_len) {
-@@ -907,7 +921,7 @@
+@@ -907,7 +921,7 @@ scan_more:
  
  	D1(printk(KERN_DEBUG "Block at 0x%08x: free 0x%08x, dirty 0x%08x, unchecked 0x%08x, used 0x%08x, wasted 0x%08x\n",
  		  jeb->offset,jeb->free_size, jeb->dirty_size, jeb->unchecked_size, jeb->used_size, jeb->wasted_size));

target/linux/generic-2.6/patches-2.6.26/208-rtl8110sb_fix.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/r8169.c
 +++ b/drivers/net/r8169.c
-@@ -1539,7 +1539,7 @@
+@@ -1539,7 +1539,7 @@ static const struct rtl_cfg_info {
  		.hw_start	= rtl_hw_start_8169,
  		.region		= 1,
  		.align		= 0,
@@ -9,7 +9,7 @@
  				  RxFIFOOver | TxErr | TxOK | RxOK | RxErr,
  		.napi_event	= RxFIFOOver | TxErr | TxOK | RxOK | RxOverflow,
  		.msi		= 0
-@@ -1548,7 +1548,7 @@
+@@ -1548,7 +1548,7 @@ static const struct rtl_cfg_info {
  		.hw_start	= rtl_hw_start_8168,
  		.region		= 2,
  		.align		= 8,
@@ -18,7 +18,7 @@
  				  TxErr | TxOK | RxOK | RxErr,
  		.napi_event	= TxErr | TxOK | RxOK | RxOverflow,
  		.msi		= RTL_FEATURE_MSI
-@@ -1557,7 +1557,7 @@
+@@ -1557,7 +1557,7 @@ static const struct rtl_cfg_info {
  		.hw_start	= rtl_hw_start_8101,
  		.region		= 2,
  		.align		= 8,
@@ -27,7 +27,7 @@
  				  RxFIFOOver | TxErr | TxOK | RxOK | RxErr,
  		.napi_event	= RxFIFOOver | TxErr | TxOK | RxOK | RxOverflow,
  		.msi		= RTL_FEATURE_MSI
-@@ -2905,10 +2905,12 @@
+@@ -2905,10 +2905,12 @@ static irqreturn_t rtl8169_interrupt(int
  			break;
  		}
  

target/linux/generic-2.6/patches-2.6.26/209-mini_fo.patch

@@ -1,6 +1,6 @@
 --- a/fs/Kconfig
 +++ b/fs/Kconfig
-@@ -1477,6 +1477,9 @@
+@@ -1477,6 +1477,9 @@ config VXFS_FS
  	  To compile this as a module, choose M here: the module will be
  	  called freevxfs.  If unsure, say N.
  
@@ -12,7 +12,7 @@
  	depends on BLOCK
 --- a/fs/Makefile
 +++ b/fs/Makefile
-@@ -77,6 +77,7 @@
+@@ -77,6 +77,7 @@ obj-$(CONFIG_SQUASHFS)		+= squashfs/
  obj-y				+= ramfs/
  obj-$(CONFIG_HUGETLBFS)		+= hugetlbfs/
  obj-$(CONFIG_CODA_FS)		+= coda/

target/linux/generic-2.6/patches-2.6.26/210-mini_fo_2.6.25_fixes.patch

@@ -1,6 +1,6 @@
 --- a/fs/mini_fo/main.c
 +++ b/fs/mini_fo/main.c
-@@ -79,6 +79,7 @@
+@@ -79,6 +79,7 @@ mini_fo_tri_interpose(dentry_t *hidden_d
  	 * of the new inode's fields
  	 */
  
@@ -8,7 +8,7 @@
  	/*
  	 * original: inode = iget(sb, hidden_inode->i_ino);
  	 */
-@@ -87,6 +88,13 @@
+@@ -87,6 +88,13 @@ mini_fo_tri_interpose(dentry_t *hidden_d
  		err = -EACCES;		/* should be impossible??? */
  		goto out;
  	}
@@ -22,7 +22,7 @@
  
  	/*
  	 * interpose the inode if not already interposed
-@@ -184,9 +192,9 @@
+@@ -184,9 +192,9 @@ mini_fo_parse_options(super_block_t *sb,
  				hidden_root = ERR_PTR(err);
  				goto out;
  			}
@@ -35,7 +35,7 @@
  
  		} else if(!strncmp("sto=", options, 4)) {
  			/* parse the storage dir */
-@@ -204,9 +212,9 @@
+@@ -204,9 +212,9 @@ mini_fo_parse_options(super_block_t *sb,
  				hidden_root2 = ERR_PTR(err);
  				goto out;
  			}
@@ -50,7 +50,7 @@
  			/* validate storage dir, this is done in
 --- a/fs/mini_fo/mini_fo.h
 +++ b/fs/mini_fo/mini_fo.h
-@@ -302,6 +302,10 @@
+@@ -302,6 +302,10 @@ extern int mini_fo_tri_interpose(dentry_
  extern int mini_fo_cp_cont(dentry_t *tgt_dentry, struct vfsmount *tgt_mnt,
  			   dentry_t *src_dentry, struct vfsmount *src_mnt);
  
@@ -61,7 +61,7 @@
  #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
  extern int mini_fo_create(inode_t *dir, dentry_t *dentry, int mode, struct nameidata *nd);
  
-@@ -501,6 +505,29 @@
+@@ -501,6 +505,29 @@ static inline void double_unlock(struct 
  #endif  /* if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) */
  #endif /* __KERNEL__ */
  
@@ -93,7 +93,7 @@
   */
 --- a/fs/mini_fo/super.c
 +++ b/fs/mini_fo/super.c
-@@ -262,10 +262,31 @@
+@@ -262,10 +262,31 @@ mini_fo_umount_begin(super_block_t *sb)
  }
  #endif
  
@@ -127,7 +127,7 @@
  #endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
 --- a/fs/mini_fo/aux.c
 +++ b/fs/mini_fo/aux.c
-@@ -164,11 +164,11 @@
+@@ -164,11 +164,11 @@ dentry_t *bpath_walk(super_block_t *sb, 
  	err = vfs_path_lookup(mnt->mnt_root, mnt, bpath+1, 0, &nd);
  
  	/* validate */

target/linux/generic-2.6/patches-2.6.26/211-mini_fo_2.6.25_dentry_open_war.patch

@@ -1,6 +1,6 @@
 --- a/fs/mini_fo/meta.c
 +++ b/fs/mini_fo/meta.c
-@@ -442,6 +442,11 @@
+@@ -442,6 +442,11 @@ int meta_write_d_entry(dentry_t *dentry,
  			   S_IRUSR | S_IWUSR);
  #endif
  	}
@@ -12,7 +12,7 @@
          /* open META-file for writing */
          meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
          if(!meta_file || IS_ERR(meta_file)) {
-@@ -535,6 +540,11 @@
+@@ -535,6 +540,11 @@ int meta_write_r_entry(dentry_t *dentry,
  			   meta_dentry, S_IRUSR | S_IWUSR);
  #endif
  	}
@@ -24,7 +24,7 @@
          /* open META-file for writing */
          meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
          if(!meta_file || IS_ERR(meta_file)) {
-@@ -671,14 +681,16 @@
+@@ -671,14 +681,16 @@ int meta_sync_d_list(dentry_t *dentry, i
  		}
  	}
  
@@ -44,7 +44,7 @@
  		dput(meta_dentry);
  		err = -1;
                  goto out;
-@@ -811,14 +823,16 @@
+@@ -811,14 +823,16 @@ int meta_sync_r_list(dentry_t *dentry, i
  		}
  	}
  

target/linux/generic-2.6/patches-2.6.26/212-mini_fo_2.6.26_fixes.patch

@@ -1,6 +1,6 @@
 --- a/fs/mini_fo/super.c
 +++ b/fs/mini_fo/super.c
-@@ -84,6 +84,7 @@
+@@ -84,6 +84,7 @@ mini_fo_write_inode(inode_t *inode, int 
  #endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
  
  
@@ -8,7 +8,7 @@
  STATIC void
  mini_fo_put_inode(inode_t *inode)
  {
-@@ -99,6 +100,7 @@
+@@ -99,6 +100,7 @@ mini_fo_put_inode(inode_t *inode)
  	if (atomic_read(&inode->i_count) == 1)
  		inode->i_nlink = 0;
  }
@@ -16,7 +16,7 @@
  
  
  #if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
-@@ -238,7 +240,7 @@
+@@ -238,7 +240,7 @@ mini_fo_clear_inode(inode_t *inode)
   * dies.
   */
  STATIC void
@@ -25,7 +25,7 @@
  mini_fo_umount_begin(struct vfsmount *mnt, int flags)
  {
  	struct vfsmount *hidden_mnt;
-@@ -290,7 +292,9 @@
+@@ -290,7 +292,9 @@ struct super_operations mini_fo_sops =
  #if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
  	write_inode:	mini_fo_write_inode,
  #endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */

target/linux/generic-2.6/patches-2.6.26/213-kobject_uevent.patch

@@ -1,6 +1,6 @@
 --- a/lib/kobject_uevent.c
 +++ b/lib/kobject_uevent.c
-@@ -29,7 +29,8 @@
+@@ -29,7 +29,8 @@ u64 uevent_seqnum;
  char uevent_helper[UEVENT_HELPER_PATH_LEN] = CONFIG_UEVENT_HELPER_PATH;
  static DEFINE_SPINLOCK(sequence_lock);
  #if defined(CONFIG_NET)
@@ -10,7 +10,7 @@
  #endif
  
  /* the strings here must match the enum in include/linux/kobject.h */
-@@ -42,6 +43,18 @@
+@@ -42,6 +43,18 @@ static const char *kobject_actions[] = {
  	[KOBJ_OFFLINE] =	"offline",
  };
  
@@ -29,7 +29,7 @@
  /**
   * kobject_action_type - translate action string to numeric type
   *
-@@ -194,9 +207,7 @@
+@@ -194,9 +207,7 @@ int kobject_uevent_env(struct kobject *k
  		kobj->state_remove_uevent_sent = 1;
  
  	/* we will send an event, so request a new sequence number */

target/linux/generic-2.6/patches-2.6.26/220-sound_kconfig.patch

@@ -1,6 +1,6 @@
 --- a/sound/core/Kconfig
 +++ b/sound/core/Kconfig
-@@ -9,7 +9,7 @@
+@@ -9,7 +9,7 @@ config SND_PCM
  	depends on SND
  
  config SND_HWDEP

target/linux/generic-2.6/patches-2.6.26/400-ledtrig_morse.patch

@@ -1,6 +1,6 @@
 --- a/drivers/leds/Kconfig
 +++ b/drivers/leds/Kconfig
-@@ -190,4 +190,8 @@
+@@ -190,4 +190,8 @@ config LEDS_TRIGGER_DEFAULT_ON
  	  This allows LEDs to be initialised in the ON state.
  	  If unsure, say Y.
  
@@ -11,7 +11,7 @@
  endif # NEW_LEDS
 --- a/drivers/leds/Makefile
 +++ b/drivers/leds/Makefile
-@@ -27,3 +27,4 @@
+@@ -27,3 +27,4 @@ obj-$(CONFIG_LEDS_TRIGGER_TIMER)	+= ledt
  obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK)	+= ledtrig-ide-disk.o
  obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT)	+= ledtrig-heartbeat.o
  obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON)	+= ledtrig-default-on.o

target/linux/generic-2.6/patches-2.6.26/401-led_alix.patch

@@ -1,6 +1,6 @@
 --- a/drivers/leds/Kconfig
 +++ b/drivers/leds/Kconfig
-@@ -77,6 +77,12 @@
+@@ -77,6 +77,12 @@ config LEDS_WRAP
  	help
  	  This option enables support for the PCEngines WRAP programmable LEDs.
  
@@ -15,7 +15,7 @@
  	depends on LEDS_CLASS && ARCH_H1940
 --- a/drivers/leds/Makefile
 +++ b/drivers/leds/Makefile
-@@ -13,6 +13,7 @@
+@@ -13,6 +13,7 @@ obj-$(CONFIG_LEDS_S3C24XX)		+= leds-s3c2
  obj-$(CONFIG_LEDS_AMS_DELTA)		+= leds-ams-delta.o
  obj-$(CONFIG_LEDS_NET48XX)		+= leds-net48xx.o
  obj-$(CONFIG_LEDS_WRAP)			+= leds-wrap.o

target/linux/generic-2.6/patches-2.6.26/402-ledtrig_netdev.patch

@@ -1,6 +1,6 @@
 --- a/drivers/leds/Kconfig
 +++ b/drivers/leds/Kconfig
-@@ -200,4 +200,11 @@
+@@ -200,4 +200,11 @@ config LEDS_TRIGGER_MORSE
  	tristate "LED Morse Trigger"
  	depends on LEDS_TRIGGERS
  
@@ -14,7 +14,7 @@
  endif # NEW_LEDS
 --- a/drivers/leds/Makefile
 +++ b/drivers/leds/Makefile
-@@ -29,3 +29,4 @@
+@@ -29,3 +29,4 @@ obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK)	+= l
  obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT)	+= ledtrig-heartbeat.o
  obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON)	+= ledtrig-default-on.o
  obj-$(CONFIG_LEDS_TRIGGER_MORSE)	+= ledtrig-morse.o

target/linux/generic-2.6/patches-2.6.26/410-gpio_buttons.patch

@@ -1,6 +1,6 @@
 --- a/drivers/input/misc/Kconfig
 +++ b/drivers/input/misc/Kconfig
-@@ -197,4 +197,20 @@
+@@ -197,4 +197,20 @@ config HP_SDC_RTC
  	  Say Y here if you want to support the built-in real time clock
  	  of the HP SDC controller.
  
@@ -23,7 +23,7 @@
  endif
 --- a/drivers/input/misc/Makefile
 +++ b/drivers/input/misc/Makefile
-@@ -19,3 +19,4 @@
+@@ -19,3 +19,4 @@ obj-$(CONFIG_INPUT_YEALINK)		+= yealink.
  obj-$(CONFIG_HP_SDC_RTC)		+= hp_sdc_rtc.o
  obj-$(CONFIG_INPUT_UINPUT)		+= uinput.o
  obj-$(CONFIG_INPUT_APANEL)		+= apanel.o

target/linux/generic-2.6/patches-2.6.26/420-gpiodev.patch

@@ -1,6 +1,6 @@
 --- a/drivers/char/Kconfig
 +++ b/drivers/char/Kconfig
-@@ -1002,6 +1002,13 @@
+@@ -1002,6 +1002,13 @@ config CS5535_GPIO
  
  	  If compiled as a module, it will be called cs5535_gpio.
  
@@ -16,7 +16,7 @@
  	depends on CPU_VR41XX
 --- a/drivers/char/Makefile
 +++ b/drivers/char/Makefile
-@@ -95,6 +95,7 @@
+@@ -95,6 +95,7 @@ obj-$(CONFIG_SCx200_GPIO)	+= scx200_gpio
  obj-$(CONFIG_PC8736x_GPIO)	+= pc8736x_gpio.o
  obj-$(CONFIG_NSC_GPIO)		+= nsc_gpio.o
  obj-$(CONFIG_CS5535_GPIO)	+= cs5535_gpio.o

target/linux/generic-2.6/patches-2.6.26/510-yaffs_support.patch

@@ -1,6 +1,6 @@
 --- a/fs/Kconfig
 +++ b/fs/Kconfig
-@@ -421,6 +421,7 @@
+@@ -421,6 +421,7 @@ config FS_POSIX_ACL
  
  source "fs/xfs/Kconfig"
  source "fs/gfs2/Kconfig"
@@ -10,7 +10,7 @@
  	tristate "OCFS2 file system support"
 --- a/fs/Makefile
 +++ b/fs/Makefile
-@@ -121,3 +121,4 @@
+@@ -121,3 +121,4 @@ obj-$(CONFIG_HPPFS)		+= hppfs/
  obj-$(CONFIG_DEBUG_FS)		+= debugfs/
  obj-$(CONFIG_OCFS2_FS)		+= ocfs2/
  obj-$(CONFIG_GFS2_FS)           += gfs2/

target/linux/generic-2.6/patches-2.6.26/512-yaffs_2.6.25_fix.patch

@@ -1,6 +1,6 @@
 --- a/fs/yaffs2/yaffs_fs.c
 +++ b/fs/yaffs2/yaffs_fs.c
-@@ -181,7 +181,13 @@
+@@ -181,7 +181,13 @@ static int yaffs_statfs(struct super_blo
  #else
  static int yaffs_statfs(struct super_block *sb, struct statfs *buf);
  #endif
@@ -14,7 +14,7 @@
  
  static void yaffs_put_inode(struct inode *inode);
  static void yaffs_delete_inode(struct inode *);
-@@ -284,7 +290,9 @@
+@@ -284,7 +290,9 @@ static struct file_operations yaffs_dir_
  
  static struct super_operations yaffs_super_ops = {
  	.statfs = yaffs_statfs,
@@ -24,7 +24,7 @@
  	.put_inode = yaffs_put_inode,
  	.put_super = yaffs_put_super,
  	.delete_inode = yaffs_delete_inode,
-@@ -844,11 +852,17 @@
+@@ -844,11 +852,17 @@ struct inode *yaffs_get_inode(struct sup
  	T(YAFFS_TRACE_OS,
  	  (KERN_DEBUG "yaffs_get_inode for object %d\n", obj->objectId));
  
@@ -42,7 +42,7 @@
  
  	return inode;
  }
-@@ -1427,6 +1441,39 @@
+@@ -1427,6 +1441,39 @@ static int yaffs_sync_fs(struct super_bl
  }
  
  
@@ -82,7 +82,7 @@
  static void yaffs_read_inode(struct inode *inode)
  {
  	/* NB This is called as a side effect of other functions, but
-@@ -1448,6 +1495,7 @@
+@@ -1448,6 +1495,7 @@ static void yaffs_read_inode(struct inod
  
  	yaffs_GrossUnlock(dev);
  }

target/linux/generic-2.6/patches-2.6.26/513-yaffs_2.6.26_fix.patch

@@ -1,6 +1,6 @@
 --- a/fs/yaffs2/yaffs_fs.c
 +++ b/fs/yaffs2/yaffs_fs.c
-@@ -76,6 +76,12 @@
+@@ -76,6 +76,12 @@ extern const char *yaffs_guts_c_version;
  
  #endif
  
@@ -13,7 +13,7 @@
  #if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
  #define WRITE_SIZE_STR "writesize"
  #define WRITE_SIZE(mtd) (mtd)->writesize
-@@ -189,7 +195,9 @@
+@@ -189,7 +195,9 @@ static void yaffs_read_inode(struct inod
  #endif
  
  
@@ -23,7 +23,7 @@
  static void yaffs_delete_inode(struct inode *);
  static void yaffs_clear_inode(struct inode *);
  
-@@ -293,7 +301,9 @@
+@@ -293,7 +301,9 @@ static struct super_operations yaffs_sup
  #if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,25))
  	.read_inode = yaffs_read_inode,
  #endif
@@ -33,7 +33,7 @@
  	.put_super = yaffs_put_super,
  	.delete_inode = yaffs_delete_inode,
  	.clear_inode = yaffs_clear_inode,
-@@ -437,6 +447,7 @@
+@@ -437,6 +447,7 @@ static struct dentry *yaffs_lookup(struc
  
  }
  
@@ -41,7 +41,7 @@
  /* For now put inode is just for debugging
   * Put inode is called when the inode **structure** is put.
   */
-@@ -447,6 +458,7 @@
+@@ -447,6 +458,7 @@ static void yaffs_put_inode(struct inode
  	   atomic_read(&inode->i_count)));
  
  }
@@ -49,7 +49,7 @@
  
  /* clear is called to tell the fs to release any per-inode data it holds */
  static void yaffs_clear_inode(struct inode *inode)
-@@ -2279,7 +2291,7 @@
+@@ -2279,7 +2291,7 @@ static int __init init_yaffs_fs(void)
  	/* Install the proc_fs entry */
  	my_proc_entry = create_proc_entry("yaffs",
  					       S_IRUGO | S_IFREG,
@@ -58,7 +58,7 @@
  
  	if (my_proc_entry) {
  		my_proc_entry->write_proc = yaffs_proc_write;
-@@ -2325,7 +2337,7 @@
+@@ -2325,7 +2337,7 @@ static void __exit exit_yaffs_fs(void)
  	T(YAFFS_TRACE_ALWAYS, ("yaffs " __DATE__ " " __TIME__
  			       " removing. \n"));
  

target/linux/generic-2.6/patches-2.6.26/600-phy_extension.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/phy/phy.c
 +++ b/drivers/net/phy/phy.c
-@@ -348,6 +348,50 @@
+@@ -348,6 +348,50 @@ int phy_ethtool_gset(struct phy_device *
  }
  EXPORT_SYMBOL(phy_ethtool_gset);
  
@@ -51,7 +51,7 @@
  /**
   * phy_mii_ioctl - generic PHY MII ioctl interface
   * @phydev: the phy_device struct
-@@ -403,8 +447,8 @@
+@@ -403,8 +447,8 @@ int phy_mii_ioctl(struct phy_device *phy
  		}
  
  		phy_write(phydev, mii_data->reg_num, val);
@@ -62,7 +62,7 @@
  				&& val & BMCR_RESET
  				&& phydev->drv->config_init) {
  			phy_scan_fixups(phydev);
-@@ -524,7 +568,7 @@
+@@ -524,7 +568,7 @@ static void phy_force_reduction(struct p
  	int idx;
  
  	idx = phy_find_setting(phydev->speed, phydev->duplex);
@@ -73,7 +73,7 @@
  	idx = phy_find_valid(idx, phydev->supported);
 --- a/include/linux/phy.h
 +++ b/include/linux/phy.h
-@@ -434,6 +434,7 @@
+@@ -434,6 +434,7 @@ void phy_start_machine(struct phy_device
  void phy_stop_machine(struct phy_device *phydev);
  int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd);
  int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd);

target/linux/generic-2.6/patches-2.6.26/610-phy_detect.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/phy/mdio_bus.c
 +++ b/drivers/net/phy/mdio_bus.c
-@@ -135,6 +135,9 @@
+@@ -135,6 +135,9 @@ static int mdio_bus_match(struct device 
  	struct phy_device *phydev = to_phy_device(dev);
  	struct phy_driver *phydrv = to_phy_driver(drv);
  
@@ -12,7 +12,7 @@
  }
 --- a/include/linux/phy.h
 +++ b/include/linux/phy.h
-@@ -339,6 +339,11 @@
+@@ -339,6 +339,11 @@ struct phy_driver {
  	u32 features;
  	u32 flags;
  

target/linux/generic-2.6/patches-2.6.26/620-phy_adm6996.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -65,6 +65,11 @@
+@@ -65,6 +65,11 @@ config REALTEK_PHY
  	---help---
  	  Supports the Realtek 821x PHY.
  
@@ -14,7 +14,7 @@
  	depends on PHYLIB=y
 --- a/drivers/net/phy/Makefile
 +++ b/drivers/net/phy/Makefile
-@@ -12,6 +12,7 @@
+@@ -12,6 +12,7 @@ obj-$(CONFIG_SMSC_PHY)		+= smsc.o
  obj-$(CONFIG_VITESSE_PHY)	+= vitesse.o
  obj-$(CONFIG_BROADCOM_PHY)	+= broadcom.o
  obj-$(CONFIG_ICPLUS_PHY)	+= icplus.o

target/linux/generic-2.6/patches-2.6.26/630-phy_packets.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/phy/phy_device.c
 +++ b/drivers/net/phy/phy_device.c
-@@ -143,6 +143,18 @@
+@@ -143,6 +143,18 @@ int phy_scan_fixups(struct phy_device *p
  }
  EXPORT_SYMBOL(phy_scan_fixups);
  
@@ -19,7 +19,7 @@
  struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id)
  {
  	struct phy_device *dev;
-@@ -168,6 +180,8 @@
+@@ -168,6 +180,8 @@ struct phy_device* phy_device_create(str
  	dev->bus = bus;
  
  	dev->state = PHY_DOWN;
@@ -30,7 +30,7 @@
  
 --- a/include/linux/phy.h
 +++ b/include/linux/phy.h
-@@ -309,6 +309,20 @@
+@@ -309,6 +309,20 @@ struct phy_device {
  	void (*adjust_link)(struct net_device *dev);
  
  	void (*adjust_state)(struct net_device *dev);
@@ -53,7 +53,7 @@
  
 --- a/include/linux/netdevice.h
 +++ b/include/linux/netdevice.h
-@@ -613,6 +613,7 @@
+@@ -613,6 +613,7 @@ struct net_device
  	void			*ax25_ptr;	/* AX.25 specific data */
  	struct wireless_dev	*ieee80211_ptr;	/* IEEE 802.11 specific data,
  						   assign before registering */

target/linux/generic-2.6/patches-2.6.26/640-mvswitch.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -70,6 +70,12 @@
+@@ -70,6 +70,12 @@ config ADM6996_PHY
  	---help---
  	  Currently supports the ADM6996F switch
  
@@ -15,7 +15,7 @@
  	depends on PHYLIB=y
 --- a/drivers/net/phy/Makefile
 +++ b/drivers/net/phy/Makefile
-@@ -13,6 +13,7 @@
+@@ -13,6 +13,7 @@ obj-$(CONFIG_VITESSE_PHY)	+= vitesse.o
  obj-$(CONFIG_BROADCOM_PHY)	+= broadcom.o
  obj-$(CONFIG_ICPLUS_PHY)	+= icplus.o
  obj-$(CONFIG_ADM6996_PHY)	+= adm6996.o
@@ -38,7 +38,7 @@
  /**
   * mdiobus_register - bring up all the PHYs on a given bus and attach them to bus
   * @bus: target mii_bus
-@@ -85,6 +91,7 @@
+@@ -85,6 +91,7 @@ int mdiobus_register(struct mii_bus *bus
  
  			phydev->dev.parent = bus->dev;
  			phydev->dev.bus = &mdio_bus_type;

target/linux/generic-2.6/patches-2.6.26/801-usb_serial_endpoint_size.patch

@@ -1,6 +1,6 @@
 --- a/drivers/usb/serial/usb-serial.c
 +++ b/drivers/usb/serial/usb-serial.c
-@@ -58,6 +58,7 @@
+@@ -58,6 +58,7 @@ static struct usb_driver usb_serial_driv
     drivers depend on it.
  */
  
@@ -8,7 +8,7 @@
  static int debug;
  static struct usb_serial *serial_table[SERIAL_TTY_MINORS];	/* initially all NULL */
  static DEFINE_MUTEX(table_lock);
-@@ -814,7 +815,7 @@
+@@ -814,7 +815,7 @@ int usb_serial_probe(struct usb_interfac
  			dev_err(&interface->dev, "No free urbs available\n");
  			goto probe_error;
  		}
@@ -17,7 +17,7 @@
  		port->bulk_in_size = buffer_size;
  		port->bulk_in_endpointAddress = endpoint->bEndpointAddress;
  		port->bulk_in_buffer = kmalloc (buffer_size, GFP_KERNEL);
-@@ -1228,3 +1229,5 @@
+@@ -1228,3 +1229,5 @@ MODULE_LICENSE("GPL");
  
  module_param(debug, bool, S_IRUGO | S_IWUSR);
  MODULE_PARM_DESC(debug, "Debug enabled or not");

target/linux/generic-2.6/patches-2.6.26/840-unable_to_open_console.patch

@@ -1,6 +1,6 @@
 --- a/init/main.c
 +++ b/init/main.c
-@@ -803,7 +803,7 @@
+@@ -803,7 +803,7 @@ static int noinline init_post(void)
  	numa_default_policy();
  
  	if (sys_open((const char __user *) "/dev/console", O_RDWR, 0) < 0)

target/linux/generic-2.6/patches-2.6.26/900-headers_type_and_time.patch

@@ -11,7 +11,7 @@
  #include <linux/types.h>
  
  #ifdef __KERNEL__
-@@ -228,4 +232,6 @@
+@@ -228,4 +232,6 @@ struct itimerval {
   */
  #define TIMER_ABSTIME			0x01
  
@@ -35,7 +35,7 @@
  #ifdef	__KERNEL__
  
  #define DECLARE_BITMAP(name,bits) \
-@@ -161,6 +169,8 @@
+@@ -161,6 +169,8 @@ typedef unsigned long blkcnt_t;
  
  #endif /* __KERNEL_STRICT_NAMES */
  

target/linux/generic-2.6/patches-2.6.26/902-darwin_scripts_include.patch

@@ -62,7 +62,7 @@
  
 --- a/scripts/kconfig/Makefile
 +++ b/scripts/kconfig/Makefile
-@@ -93,6 +93,9 @@
+@@ -93,6 +93,9 @@ check-lxdialog  := $(srctree)/$(src)/lxd
  # we really need to do so. (Do not call gcc as part of make mrproper)
  HOST_EXTRACFLAGS = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags)
  HOST_LOADLIBES   = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC))

target/linux/generic-2.6/patches-2.6.26/903-hostap_txpower.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/hostap/hostap_ap.c
 +++ b/drivers/net/wireless/hostap/hostap_ap.c
-@@ -2397,13 +2397,13 @@
+@@ -2397,13 +2397,13 @@ int prism2_ap_get_sta_qual(local_info_t 
  		addr[count].sa_family = ARPHRD_ETHER;
  		memcpy(addr[count].sa_data, sta->addr, ETH_ALEN);
  		if (sta->last_rx_silence == 0)
@@ -20,7 +20,7 @@
  		qual[count].updated = sta->last_rx_updated;
  
  		sta->last_rx_updated = IW_QUAL_DBM;
-@@ -2468,13 +2468,13 @@
+@@ -2468,13 +2468,13 @@ int prism2_ap_translate_scan(struct net_
  		memset(&iwe, 0, sizeof(iwe));
  		iwe.cmd = IWEVQUAL;
  		if (sta->last_rx_silence == 0)
@@ -54,7 +54,7 @@
  #endif /* HOSTAP_CONFIG_H */
 --- a/drivers/net/wireless/hostap/hostap.h
 +++ b/drivers/net/wireless/hostap/hostap.h
-@@ -89,6 +89,7 @@
+@@ -89,6 +89,7 @@ extern const struct iw_handler_def hosta
  extern const struct ethtool_ops prism2_ethtool_ops;
  
  int hostap_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
@@ -64,7 +64,7 @@
  #endif /* HOSTAP_H */
 --- a/drivers/net/wireless/hostap/hostap_hw.c
 +++ b/drivers/net/wireless/hostap/hostap_hw.c
-@@ -933,6 +933,7 @@
+@@ -933,6 +933,7 @@ static int hfa384x_set_rid(struct net_de
  			prism2_hw_reset(dev);
  	}
  
@@ -74,7 +74,7 @@
  
 --- a/drivers/net/wireless/hostap/hostap_info.c
 +++ b/drivers/net/wireless/hostap/hostap_info.c
-@@ -434,6 +434,11 @@
+@@ -434,6 +434,11 @@ static void handle_info_queue_linkstatus
  	}
  
  	/* Get BSSID if we have a valid AP address */
@@ -88,7 +88,7 @@
  		netif_carrier_on(local->ddev);
 --- a/drivers/net/wireless/hostap/hostap_ioctl.c
 +++ b/drivers/net/wireless/hostap/hostap_ioctl.c
-@@ -1500,23 +1500,20 @@
+@@ -1500,23 +1500,20 @@ static int prism2_txpower_hfa386x_to_dBm
  		val = 255;
  
  	tmp = val;
@@ -116,7 +116,7 @@
  
  	return (unsigned char) tmp;
  }
-@@ -4076,3 +4073,35 @@
+@@ -4076,3 +4073,35 @@ int hostap_ioctl(struct net_device *dev,
  
  	return ret;
  }

target/linux/generic-2.6/patches-2.6.26/903-stddef_include.patch

@@ -1,6 +1,6 @@
 --- a/include/linux/stddef.h
 +++ b/include/linux/stddef.h
-@@ -16,6 +16,7 @@
+@@ -16,6 +16,7 @@ enum {
  	false	= 0,
  	true	= 1
  };
@@ -8,7 +8,7 @@
  
  #undef offsetof
  #ifdef __compiler_offsetof
-@@ -23,6 +24,5 @@
+@@ -23,6 +24,5 @@ enum {
  #else
  #define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER)
  #endif