mediatek: import driver for Adtran SmartRG RGBW LED

Import driver for I2C-connected HolTek MCU controlling the RGBW LED
found in Adtran SmartRG devices.

Signed-off-by: Daniel Golle <[email protected]>

target/linux/mediatek/files/drivers/leds/leds-smartrg-system.c

@@ -0,0 +1,239 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/version.h>
+
+/**
+ * Driver for SmartRG RGBW LED microcontroller.
+ * RGBW LED is connected to a Holtek HT45F0062 that is on the I2C bus.
+ *
+ */
+
+struct srg_led_ctrl;
+struct srg_led {
+	u8 index;
+	struct led_classdev led;
+	struct srg_led_ctrl *ctrl;
+};
+
+struct srg_led_ctrl {
+	struct mutex lock;
+	struct i2c_client *client;
+	struct srg_led channel[4];
+	u8 control[5];
+};
+
+static int
+srg_led_i2c_write(struct srg_led_ctrl *sysled_ctrl, u8 reg, u8 value)
+{
+	return i2c_smbus_write_byte_data(sysled_ctrl->client, reg, value);
+}
+
+/*
+ * MC LED Command: 0 = OFF, 1 = ON, 2 = Flash, 3 = Pulse, 4 = Blink
+ * */
+static int
+srg_led_control_sync(struct srg_led_ctrl *sysled_ctrl)
+{
+	int i, ret;
+
+	for (i = 1; i < 5; i++) {
+		ret = srg_led_i2c_write(sysled_ctrl, i, sysled_ctrl->control[i]);
+		if (ret)
+			break;
+	}
+	return ret;
+}
+
+/*
+ * This function overrides the led driver timer trigger to offload
+ * flashing to the micro-controller.  The negative effect of this
+ * is the inability to configure the delay_on and delay_off periods.
+ *
+ * */
+static int
+srg_led_set_pulse(struct led_classdev *led_cdev,
+		  unsigned long *delay_on,
+		  unsigned long *delay_off)
+{
+	struct srg_led *sysled = container_of(led_cdev, struct srg_led, led);
+	struct srg_led_ctrl *sysled_ctrl = sysled->ctrl;
+	bool blinking = false, pulsing = false;
+	u8 cbyte;
+	int ret;
+
+	if (delay_on && delay_off && (*delay_on > 100) && (*delay_on <= 500)) {
+		pulsing = true;
+		*delay_on = 500;
+		*delay_off = 500;
+	} else if (delay_on && delay_off && (*delay_on >= 50) && (*delay_on <= 100)) {
+		blinking = true;
+		*delay_on = 50;
+		*delay_off = 50;
+	}
+
+	cbyte = pulsing ? 3 : blinking ? 2 : 0;
+	mutex_lock(&sysled_ctrl->lock);
+	ret = srg_led_i2c_write(sysled_ctrl, sysled->index + 4,
+				(blinking || pulsing) ? 255 : 0);
+	if (!ret) {
+		sysled_ctrl->control[sysled->index] = cbyte;
+		ret = srg_led_control_sync(sysled_ctrl);
+	}
+	mutex_unlock(&sysled_ctrl->lock);
+
+	return !cbyte;
+}
+
+static int
+srg_led_set_brightness(struct led_classdev *led_cdev,
+			enum led_brightness value)
+{
+	struct srg_led *sysled = container_of(led_cdev, struct srg_led, led);
+	struct srg_led_ctrl *sysled_ctrl = sysled->ctrl;
+	int ret;
+
+	mutex_lock(&sysled_ctrl->lock);
+	ret = srg_led_i2c_write(sysled_ctrl, sysled->index + 4, value);
+	if (!ret) {
+		sysled_ctrl->control[sysled->index] = !!value;
+		ret = srg_led_control_sync(sysled_ctrl);
+	}
+	mutex_unlock(&sysled_ctrl->lock);
+	return ret;
+}
+
+static int
+srg_led_init_led(struct srg_led_ctrl *sysled_ctrl, struct device_node *np)
+{
+	struct led_init_data init_data = {};
+	struct led_classdev *led_cdev;
+	struct srg_led *sysled;
+	int index, ret;
+
+	if (!np)
+		return -ENOENT;
+
+	ret = of_property_read_u32(np, "reg", &index);
+	if (ret) {
+		dev_err(&sysled_ctrl->client->dev,
+			"srg_led_init_led: no reg defined in np!\n");
+		return ret;
+	}
+
+	if (index < 1 || index > 4)
+		return -EINVAL;
+
+	sysled = &sysled_ctrl->channel[index - 1];
+	led_cdev = &sysled->led;
+
+	sysled->index = index;
+	sysled->ctrl = sysled_ctrl;
+
+	init_data.fwnode = of_fwnode_handle(np);
+
+	led_cdev->name = of_get_property(np, "label", NULL) ? : np->name;
+	led_cdev->brightness = LED_OFF;
+	led_cdev->max_brightness = LED_FULL;
+	led_cdev->brightness_set_blocking = srg_led_set_brightness;
+	led_cdev->blink_set = srg_led_set_pulse;
+
+	srg_led_i2c_write(sysled_ctrl, index + 4, 0);
+
+	ret = devm_led_classdev_register_ext(&sysled_ctrl->client->dev,
+						led_cdev, &init_data);
+	if (ret) {
+		dev_err(&sysled_ctrl->client->dev,
+			"srg_led_init_led: led register %s error ret %d!n",
+			led_cdev->name, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int
+srg_led_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+	struct device_node *np = client->dev.of_node, *child;
+	struct srg_led_ctrl *sysled_ctrl;
+
+	sysled_ctrl = devm_kzalloc(&client->dev, sizeof(*sysled_ctrl), GFP_KERNEL);
+	if (!sysled_ctrl)
+		return -ENOMEM;
+
+	sysled_ctrl->client = client;
+
+	mutex_init(&sysled_ctrl->lock);
+
+	i2c_set_clientdata(client, sysled_ctrl);
+
+	for_each_child_of_node(np, child) {
+		if (srg_led_init_led(sysled_ctrl, child))
+			continue;
+
+		msleep(5);
+	}
+
+	return srg_led_control_sync(sysled_ctrl);;
+}
+
+static void srg_led_disable(struct i2c_client *client)
+{
+	struct srg_led_ctrl *sysled_ctrl = i2c_get_clientdata(client);
+	int i;
+
+	for (i = 1; i < 10; i++)
+		srg_led_i2c_write(sysled_ctrl, i, 0);
+}
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(5,16,0)
+static void
+#else
+static int
+#endif
+srg_led_remove(struct i2c_client *client)
+{
+	struct srg_led_ctrl *sysled_ctrl = i2c_get_clientdata(client);
+
+	srg_led_disable(client);
+	mutex_destroy(&sysled_ctrl->lock);
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(5,16,0)
+	return 0;
+#endif
+}
+
+static const struct i2c_device_id srg_led_id[] = {
+	{ "srg-sysled", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, srg_led_id);
+
+static const struct of_device_id of_srg_led_match[] = {
+	{ .compatible = "srg,sysled", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, of_srg_led_match);
+
+static struct i2c_driver srg_sysled_driver = {
+	.driver = {
+		.name	= "srg-sysled",
+		.of_match_table = of_srg_led_match,
+	},
+	.probe		= srg_led_probe,
+	.remove		= srg_led_remove,
+	.id_table	= srg_led_id,
+};
+module_i2c_driver(srg_sysled_driver);
+
+MODULE_DESCRIPTION("SmartRG system LED driver");
+MODULE_AUTHOR("Shen Loh <[email protected]>");
+MODULE_AUTHOR("Daniel Golle <[email protected]>");
+MODULE_LICENSE("GPL v2");

target/linux/mediatek/filogic/config-5.15

@@ -195,6 +195,7 @@ CONFIG_IRQ_TIME_ACCOUNTING=y
 CONFIG_IRQ_WORK=y
 CONFIG_JBD2=y
 CONFIG_JUMP_LABEL=y
+CONFIG_LEDS_SMARTRG_LED=y
 CONFIG_LIBFDT=y
 CONFIG_LOCK_DEBUGGING_SUPPORT=y
 CONFIG_LOCK_SPIN_ON_OWNER=y

target/linux/mediatek/filogic/config-6.1

@@ -212,6 +212,7 @@ CONFIG_IRQ_TIME_ACCOUNTING=y
 CONFIG_IRQ_WORK=y
 CONFIG_JBD2=y
 CONFIG_JUMP_LABEL=y
+CONFIG_LEDS_SMARTRG_LED=y
 CONFIG_LIBFDT=y
 CONFIG_LOCK_DEBUGGING_SUPPORT=y
 CONFIG_LOCK_SPIN_ON_OWNER=y

target/linux/mediatek/mt7622/config-5.15

@@ -215,6 +215,7 @@ CONFIG_IRQ_TIME_ACCOUNTING=y
 CONFIG_IRQ_WORK=y
 CONFIG_JBD2=y
 CONFIG_JUMP_LABEL=y
+# CONFIG_LEDS_SMARTRG_LED is not set
 CONFIG_LIBFDT=y
 CONFIG_LOCK_DEBUGGING_SUPPORT=y
 CONFIG_LOCK_SPIN_ON_OWNER=y

target/linux/mediatek/mt7622/config-6.1

@@ -216,6 +216,7 @@ CONFIG_IRQ_TIME_ACCOUNTING=y
 CONFIG_IRQ_WORK=y
 CONFIG_JBD2=y
 CONFIG_JUMP_LABEL=y
+# CONFIG_LEDS_SMARTRG_LED is not set
 CONFIG_LIBFDT=y
 CONFIG_LOCK_DEBUGGING_SUPPORT=y
 CONFIG_LOCK_SPIN_ON_OWNER=y

target/linux/mediatek/mt7623/config-5.15

@@ -297,6 +297,7 @@ CONFIG_KMAP_LOCAL_NON_LINEAR_PTE_ARRAY=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_PLATFORM=y
 CONFIG_LEDS_MT6323=y
+# CONFIG_LEDS_SMARTRG_LED is not set
 CONFIG_LIBFDT=y
 CONFIG_LOCK_DEBUGGING_SUPPORT=y
 CONFIG_LOCK_SPIN_ON_OWNER=y

target/linux/mediatek/mt7623/config-6.1

@@ -317,6 +317,7 @@ CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_PLATFORM=y
 CONFIG_LEDS_MT6323=y
 # CONFIG_LEDS_QCOM_LPG is not set
+# CONFIG_LEDS_SMARTRG_LED is not set
 CONFIG_LIBFDT=y
 CONFIG_LOCK_DEBUGGING_SUPPORT=y
 CONFIG_LOCK_SPIN_ON_OWNER=y

target/linux/mediatek/mt7629/config-5.15

@@ -149,6 +149,7 @@ CONFIG_IRQ_FORCED_THREADING=y
 CONFIG_IRQ_TIME_ACCOUNTING=y
 CONFIG_IRQ_WORK=y
 # CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set
+# CONFIG_LEDS_SMARTRG_LED is not set
 CONFIG_LIBFDT=y
 CONFIG_LOCK_DEBUGGING_SUPPORT=y
 CONFIG_LOCK_SPIN_ON_OWNER=y

target/linux/mediatek/mt7629/config-6.1

@@ -165,6 +165,7 @@ CONFIG_IRQ_TIME_ACCOUNTING=y
 CONFIG_IRQ_WORK=y
 # CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set
 CONFIG_LIBFDT=y
+# CONFIG_LEDS_SMARTRG_LED is not set
 CONFIG_LOCK_DEBUGGING_SUPPORT=y
 CONFIG_LOCK_SPIN_ON_OWNER=y
 CONFIG_LZO_COMPRESS=y

target/linux/mediatek/patches-5.15/950-smartrg-i2c-led-driver.patch

@@ -0,0 +1,34 @@
+---
+ drivers/leds/Kconfig  |   10 ++++++++++
+ drivers/leds/Makefile |    1 +
+ 2 files changed, 11 insertions(+)
+
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -877,6 +877,16 @@ source "drivers/leds/blink/Kconfig"
+ comment "Flash and Torch LED drivers"
+ source "drivers/leds/flash/Kconfig"
+ 
++config LEDS_SMARTRG_LED
++	tristate "LED support for Adtran SmartRG"
++	depends on LEDS_CLASS && I2C && OF
++	help
++	  This option enables support for the Adtran SmartRG platform
++	  system LED driver.
++
++	  To compile this driver as a module, choose M here: the module
++	  will be called leds-smartrg-system.
++
+ comment "LED Triggers"
+ source "drivers/leds/trigger/Kconfig"
+ 
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -77,6 +77,7 @@ obj-$(CONFIG_LEDS_PWM)			+= leds-pwm.o
+ obj-$(CONFIG_LEDS_REGULATOR)		+= leds-regulator.o
+ obj-$(CONFIG_LEDS_S3C24XX)		+= leds-s3c24xx.o
+ obj-$(CONFIG_LEDS_SC27XX_BLTC)		+= leds-sc27xx-bltc.o
++obj-$(CONFIG_LEDS_SMARTRG_LED)		+= leds-smartrg-system.o
+ obj-$(CONFIG_LEDS_SUNFIRE)		+= leds-sunfire.o
+ obj-$(CONFIG_LEDS_SYSCON)		+= leds-syscon.o
+ obj-$(CONFIG_LEDS_TCA6507)		+= leds-tca6507.o

target/linux/mediatek/patches-6.1/950-smartrg-i2c-led-driver.patch

@@ -0,0 +1,34 @@
+---
+ drivers/leds/Kconfig  |   10 ++++++++++
+ drivers/leds/Makefile |    1 +
+ 2 files changed, 11 insertions(+)
+
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -873,6 +873,16 @@ source "drivers/leds/flash/Kconfig"
+ comment "RGB LED drivers"
+ source "drivers/leds/rgb/Kconfig"
+ 
++config LEDS_SMARTRG_LED
++	tristate "LED support for Adtran SmartRG"
++	depends on LEDS_CLASS && I2C && OF
++	help
++	  This option enables support for the Adtran SmartRG platform
++	  system LED driver.
++
++	  To compile this driver as a module, choose M here: the module
++	  will be called leds-smartrg-system.
++
+ comment "LED Triggers"
+ source "drivers/leds/trigger/Kconfig"
+ 
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -76,6 +76,7 @@ obj-$(CONFIG_LEDS_PWM)			+= leds-pwm.o
+ obj-$(CONFIG_LEDS_REGULATOR)		+= leds-regulator.o
+ obj-$(CONFIG_LEDS_S3C24XX)		+= leds-s3c24xx.o
+ obj-$(CONFIG_LEDS_SC27XX_BLTC)		+= leds-sc27xx-bltc.o
++obj-$(CONFIG_LEDS_SMARTRG_LED)		+= leds-smartrg-system.o
+ obj-$(CONFIG_LEDS_SUNFIRE)		+= leds-sunfire.o
+ obj-$(CONFIG_LEDS_SYSCON)		+= leds-syscon.o
+ obj-$(CONFIG_LEDS_TCA6507)		+= leds-tca6507.o