kernel: bump 6.6 to 6.6.83

Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.83

Removed upstreamed:
	bcm27xx/patches-6.6/950-0483-usb-xhci-borrow-upstream-TRB_FETCH-quirk-on-VL805-ho.patch[1]

Manually rebased:
	bcm27xx/patches-6.6/950-0061-Revert-Revert-xhci-add-quirk-for-host-controllers-th.patch
	bcm27xx/patches-6.6/950-0485-usb-xhci-add-XHCI_VLI_HUB_TT_QUIRK.patch
	bcm27xx/patches-6.6/950-0519-usb-dwc3-Set-DMA-and-coherent-masks-early.patch

All other patches automatically rebased.

1. https://web.git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/drivers/usb/host/xhci-pci.c?h=linux-6.6.y&id=c401b1b4b835d66792e884b76264d742a20d931d

Build system: x86/64
Build-tested: x86/64
Run-tested: x86/64

Signed-off-by: John Audia <[email protected]>
[fixed issues with bcm27xx patches]
Signed-off-by: Álvaro Fernández Rojas <[email protected]>
(cherry picked from commit 748682e8556d27d904d3fe363228e16eff47afd9)

include/kernel-6.6

@@ -1,2 +1,2 @@
-LINUX_VERSION-6.6 = .82
-LINUX_KERNEL_HASH-6.6.82 = f3c2389b8c23cabe747f104a3e434201ca6e7725bbbfb3a8c59a063ac4820e41
+LINUX_VERSION-6.6 = .83
+LINUX_KERNEL_HASH-6.6.83 = 894bbbe63b7484a0bc576a1e11a8dbc090fbd476d6424431bdc8435e03c2c208

target/linux/airoha/patches-6.6/029-v6.12-net-dsa-mt7530-Add-EN7581-support.patch

@@ -79,7 +79,7 @@ Signed-off-by: David S. Miller <[email protected]>
  
  		/* Disable forwarding by default on all ports */
  		mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK,
-@@ -2783,6 +2788,28 @@ static void mt7988_mac_port_get_caps(str
+@@ -2779,6 +2784,28 @@ static void mt7988_mac_port_get_caps(str
  	}
  }
  
@@ -108,7 +108,7 @@ Signed-off-by: David S. Miller <[email protected]>
  static void
  mt7530_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
  		  phy_interface_t interface)
-@@ -3220,6 +3247,16 @@ const struct mt753x_info mt753x_table[]
+@@ -3216,6 +3243,16 @@ const struct mt753x_info mt753x_table[]
  		.phy_write_c45 = mt7531_ind_c45_phy_write,
  		.mac_port_get_caps = mt7988_mac_port_get_caps,
  	},

target/linux/ath79/patches-6.6/900-unaligned_access_hacks.patch

@@ -858,7 +858,7 @@ SVN-Revision: 35130
  
 --- a/net/ipv4/tcp_offload.c
 +++ b/net/ipv4/tcp_offload.c
-@@ -63,7 +63,7 @@ static struct sk_buff *__tcpv4_gso_segme
+@@ -66,7 +66,7 @@ static struct sk_buff *__tcpv4_gso_segme
  	th2 = tcp_hdr(seg->next);
  	iph2 = ip_hdr(seg->next);
  
@@ -867,7 +867,7 @@ SVN-Revision: 35130
  	    iph->daddr == iph2->daddr && iph->saddr == iph2->saddr)
  		return segs;
  
-@@ -264,7 +264,7 @@ struct sk_buff *tcp_gro_lookup(struct li
+@@ -267,7 +267,7 @@ struct sk_buff *tcp_gro_lookup(struct li
  			continue;
  
  		th2 = tcp_hdr(p);
@@ -876,7 +876,7 @@ SVN-Revision: 35130
  			NAPI_GRO_CB(p)->same_flow = 0;
  			continue;
  		}
-@@ -330,8 +330,8 @@ struct sk_buff *tcp_gro_receive(struct l
+@@ -333,8 +333,8 @@ struct sk_buff *tcp_gro_receive(struct l
  		  ~(TCP_FLAG_CWR | TCP_FLAG_FIN | TCP_FLAG_PSH));
  	flush |= (__force int)(th->ack_seq ^ th2->ack_seq);
  	for (i = sizeof(*th); i < thlen; i += 4)

target/linux/bcm27xx/patches-6.6/950-0061-Revert-Revert-xhci-add-quirk-for-host-controllers-th.patch

@@ -14,18 +14,14 @@ We don't agree with upstream revert so undo it.
 
 --- a/drivers/usb/host/xhci-pci.c
 +++ b/drivers/usb/host/xhci-pci.c
-@@ -480,8 +480,10 @@ static void xhci_pci_quirks(struct devic
- 			pdev->device == 0x3432)
- 		xhci->quirks |= XHCI_BROKEN_STREAMS;
- 
--	if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483)
-+	if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483) {
+@@ -485,6 +485,7 @@ static void xhci_pci_quirks(struct devic
+ 	if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == PCI_DEVICE_ID_VIA_VL805) {
  		xhci->quirks |= XHCI_LPM_SUPPORT;
+ 		xhci->quirks |= XHCI_TRB_OVERFETCH;
 +		xhci->quirks |= XHCI_EP_CTX_BROKEN_DCS;
-+	}
+ 	}
  
  	if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
- 		pdev->device == PCI_DEVICE_ID_ASMEDIA_1042_XHCI) {
 --- a/drivers/usb/host/xhci-ring.c
 +++ b/drivers/usb/host/xhci-ring.c
 @@ -635,8 +635,11 @@ static int xhci_move_dequeue_past_td(str

target/linux/bcm27xx/patches-6.6/950-0482-xhci-quirks-add-link-TRB-quirk-for-VL805.patch

@@ -24,9 +24,9 @@ Signed-off-by: Jonathan Bell <[email protected]>
 
 --- a/drivers/usb/host/xhci-pci.c
 +++ b/drivers/usb/host/xhci-pci.c
-@@ -483,6 +483,7 @@ static void xhci_pci_quirks(struct devic
- 	if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483) {
+@@ -486,6 +486,7 @@ static void xhci_pci_quirks(struct devic
  		xhci->quirks |= XHCI_LPM_SUPPORT;
+ 		xhci->quirks |= XHCI_TRB_OVERFETCH;
  		xhci->quirks |= XHCI_EP_CTX_BROKEN_DCS;
 +		xhci->quirks |= XHCI_AVOID_DQ_ON_LINK;
  	}

target/linux/bcm27xx/patches-6.6/950-0483-usb-xhci-borrow-upstream-TRB_FETCH-quirk-on-VL805-ho.patch

@@ -1,32 +0,0 @@
-From bab2f1e4e90675af7ea6b48b5c28eb94e22cecd7 Mon Sep 17 00:00:00 2001
-From: Jonathan Bell <[email protected]>
-Date: Thu, 13 Jul 2023 15:06:54 +0100
-Subject: [PATCH 0483/1085] usb: xhci: borrow upstream TRB_FETCH quirk on VL805
- hosts
-
-This reimplements 5a57342 usb: xhci: add VLI_TRB_CACHE_BUG quirk
-
-The downstream implementation required a fair bit of driver surgery to
-allow for truncated ring segments, which needed to shrink by a small
-amount to avoid the cache prefetcher from reading off the end of one
-segment and into another.
-
-An upstream implementation for a similar bug on a different controller
-just doubles the size of the memory allocated for ring segments, which
-is a bit more wasteful (+4K per allocation) but means less code churn.
-
-Signed-off-by: Jonathan Bell <[email protected]>
----
- drivers/usb/host/xhci-pci.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/usb/host/xhci-pci.c
-+++ b/drivers/usb/host/xhci-pci.c
-@@ -484,6 +484,7 @@ static void xhci_pci_quirks(struct devic
- 		xhci->quirks |= XHCI_LPM_SUPPORT;
- 		xhci->quirks |= XHCI_EP_CTX_BROKEN_DCS;
- 		xhci->quirks |= XHCI_AVOID_DQ_ON_LINK;
-+		xhci->quirks |= XHCI_ZHAOXIN_TRB_FETCH;
- 	}
- 
- 	if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&

target/linux/bcm27xx/patches-6.6/950-0484-usb-xhci-add-VLI_SS_BULK_OUT_BUG-quirk.patch

@@ -90,10 +90,10 @@ Signed-off-by: Jonathan Bell <[email protected]>
  	/* Allow 3 retries for everything but isoc, set CErr = 3 */
 --- a/drivers/usb/host/xhci-pci.c
 +++ b/drivers/usb/host/xhci-pci.c
-@@ -485,6 +485,7 @@ static void xhci_pci_quirks(struct devic
+@@ -487,6 +487,7 @@ static void xhci_pci_quirks(struct devic
+ 		xhci->quirks |= XHCI_TRB_OVERFETCH;
  		xhci->quirks |= XHCI_EP_CTX_BROKEN_DCS;
  		xhci->quirks |= XHCI_AVOID_DQ_ON_LINK;
- 		xhci->quirks |= XHCI_ZHAOXIN_TRB_FETCH;
 +		xhci->quirks |= XHCI_VLI_SS_BULK_OUT_BUG;
  	}
  

target/linux/bcm27xx/patches-6.6/950-0485-usb-xhci-add-XHCI_VLI_HUB_TT_QUIRK.patch

@@ -45,9 +45,9 @@ Signed-off-by: Jonathan Bell <[email protected]>
 +#define VL805_FW_VER_0138C0	0x0138C0
 +
  /* Device for a quirk */
- #define PCI_VENDOR_ID_FRESCO_LOGIC	0x1b73
- #define PCI_DEVICE_ID_FRESCO_LOGIC_PDK	0x1000
-@@ -295,6 +297,16 @@ static int xhci_pci_reinit(struct xhci_h
+ #define PCI_VENDOR_ID_FRESCO_LOGIC		0x1b73
+ #define PCI_DEVICE_ID_FRESCO_LOGIC_PDK		0x1000
+@@ -297,6 +299,16 @@ static int xhci_pci_reinit(struct xhci_h
  	return 0;
  }
  
@@ -64,9 +64,9 @@ Signed-off-by: Jonathan Bell <[email protected]>
  static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
  {
  	struct pci_dev                  *pdev = to_pci_dev(dev);
-@@ -486,6 +498,8 @@ static void xhci_pci_quirks(struct devic
+@@ -488,6 +500,8 @@ static void xhci_pci_quirks(struct devic
+ 		xhci->quirks |= XHCI_EP_CTX_BROKEN_DCS;
  		xhci->quirks |= XHCI_AVOID_DQ_ON_LINK;
- 		xhci->quirks |= XHCI_ZHAOXIN_TRB_FETCH;
  		xhci->quirks |= XHCI_VLI_SS_BULK_OUT_BUG;
 +		if (xhci_vl805_get_fw_version(pdev) < VL805_FW_VER_0138C0)
 +			xhci->quirks |= XHCI_VLI_HUB_TT_QUIRK;

target/linux/bcm27xx/patches-6.6/950-0519-usb-dwc3-Set-DMA-and-coherent-masks-early.patch

@@ -212,7 +212,7 @@ Signed-off-by: Jonathan Bell <[email protected]>
  	},
 --- a/drivers/usb/dwc3/core.c
 +++ b/drivers/usb/dwc3/core.c
-@@ -1208,6 +1208,24 @@ static void dwc3_config_threshold(struct
+@@ -1223,6 +1223,24 @@ static void dwc3_config_threshold(struct
  	}
  }
  
@@ -237,7 +237,7 @@ Signed-off-by: Jonathan Bell <[email protected]>
  /**
   * dwc3_core_init - Low-level initialization of DWC3 Core
   * @dwc: Pointer to our controller context structure
-@@ -1273,6 +1291,8 @@ static int dwc3_core_init(struct dwc3 *d
+@@ -1288,6 +1306,8 @@ static int dwc3_core_init(struct dwc3 *d
  
  	dwc3_set_incr_burst_type(dwc);
  
@@ -246,7 +246,7 @@ Signed-off-by: Jonathan Bell <[email protected]>
  	ret = dwc3_phy_power_on(dwc);
  	if (ret)
  		goto err_exit_phy;
-@@ -1362,6 +1382,24 @@ static int dwc3_core_init(struct dwc3 *d
+@@ -1377,6 +1397,24 @@ static int dwc3_core_init(struct dwc3 *d
  
  	dwc3_config_threshold(dwc);
  
@@ -271,7 +271,7 @@ Signed-off-by: Jonathan Bell <[email protected]>
  	return 0;
  
  err_power_off_phy:
-@@ -1505,6 +1543,7 @@ static void dwc3_get_properties(struct d
+@@ -1520,6 +1558,7 @@ static void dwc3_get_properties(struct d
  	u8			tx_thr_num_pkt_prd = 0;
  	u8			tx_max_burst_prd = 0;
  	u8			tx_fifo_resize_max_num;
@@ -279,7 +279,7 @@ Signed-off-by: Jonathan Bell <[email protected]>
  
  	/* default to highest possible threshold */
  	lpm_nyet_threshold = 0xf;
-@@ -1525,6 +1564,9 @@ static void dwc3_get_properties(struct d
+@@ -1540,6 +1579,9 @@ static void dwc3_get_properties(struct d
  	 */
  	tx_fifo_resize_max_num = 6;
  
@@ -289,7 +289,7 @@ Signed-off-by: Jonathan Bell <[email protected]>
  	dwc->maximum_speed = usb_get_maximum_speed(dev);
  	dwc->max_ssp_rate = usb_get_maximum_ssp_rate(dev);
  	dwc->dr_mode = usb_get_dr_mode(dev);
-@@ -1639,6 +1681,9 @@ static void dwc3_get_properties(struct d
+@@ -1654,6 +1696,9 @@ static void dwc3_get_properties(struct d
  	dwc->dis_split_quirk = device_property_read_bool(dev,
  				"snps,dis-split-quirk");
  
@@ -299,16 +299,16 @@ Signed-off-by: Jonathan Bell <[email protected]>
  	dwc->lpm_nyet_threshold = lpm_nyet_threshold;
  	dwc->tx_de_emphasis = tx_de_emphasis;
  
-@@ -1656,6 +1701,8 @@ static void dwc3_get_properties(struct d
+@@ -1671,6 +1716,8 @@ static void dwc3_get_properties(struct d
  	dwc->tx_thr_num_pkt_prd = tx_thr_num_pkt_prd;
  	dwc->tx_max_burst_prd = tx_max_burst_prd;
  
 +	dwc->axi_pipe_limit = axi_pipe_limit;
 +
- 	dwc->imod_interval = 0;
- 
  	dwc->tx_fifo_resize_max_num = tx_fifo_resize_max_num;
-@@ -1952,6 +1999,12 @@ static int dwc3_probe(struct platform_de
+ }
+ 
+@@ -1963,6 +2010,12 @@ static int dwc3_probe(struct platform_de
  	if (IS_ERR(dwc->usb_psy))
  		return dev_err_probe(dev, PTR_ERR(dwc->usb_psy), "couldn't get usb power supply\n");
  

target/linux/bcm27xx/patches-6.6/950-0853-drivers-usb-dwc3-add-FS-LS-bus-instance-parkmode-dis.patch

@@ -16,7 +16,7 @@ Signed-off-by: Jonathan Bell <[email protected]>
 
 --- a/drivers/usb/dwc3/core.c
 +++ b/drivers/usb/dwc3/core.c
-@@ -1372,6 +1372,9 @@ static int dwc3_core_init(struct dwc3 *d
+@@ -1387,6 +1387,9 @@ static int dwc3_core_init(struct dwc3 *d
  		if (dwc->parkmode_disable_hs_quirk)
  			reg |= DWC3_GUCTL1_PARKMODE_DISABLE_HS;
  
@@ -26,7 +26,7 @@ Signed-off-by: Jonathan Bell <[email protected]>
  		if (DWC3_VER_IS_WITHIN(DWC3, 290A, ANY) &&
  		    (dwc->maximum_speed == USB_SPEED_HIGH ||
  		     dwc->maximum_speed == USB_SPEED_FULL))
-@@ -1661,6 +1664,8 @@ static void dwc3_get_properties(struct d
+@@ -1676,6 +1679,8 @@ static void dwc3_get_properties(struct d
  				"snps,parkmode-disable-ss-quirk");
  	dwc->parkmode_disable_hs_quirk = device_property_read_bool(dev,
  				"snps,parkmode-disable-hs-quirk");

target/linux/bcm27xx/patches-6.6/950-1359-usb-dwc3-core-add-support-for-setting-NAK-enhancemen.patch

@@ -22,7 +22,7 @@ Signed-off-by: Jonathan Bell <[email protected]>
 
 --- a/drivers/usb/dwc3/core.c
 +++ b/drivers/usb/dwc3/core.c
-@@ -1366,6 +1366,12 @@ static int dwc3_core_init(struct dwc3 *d
+@@ -1381,6 +1381,12 @@ static int dwc3_core_init(struct dwc3 *d
  		if (dwc->dis_tx_ipgap_linecheck_quirk)
  			reg |= DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS;
  
@@ -35,7 +35,7 @@ Signed-off-by: Jonathan Bell <[email protected]>
  		if (dwc->parkmode_disable_ss_quirk)
  			reg |= DWC3_GUCTL1_PARKMODE_DISABLE_SS;
  
-@@ -1660,6 +1666,10 @@ static void dwc3_get_properties(struct d
+@@ -1675,6 +1681,10 @@ static void dwc3_get_properties(struct d
  				"snps,resume-hs-terminations");
  	dwc->ulpi_ext_vbus_drv = device_property_read_bool(dev,
  				"snps,ulpi-ext-vbus-drv");

target/linux/generic/backport-6.6/611-01-v6.11-udp-Allow-GSO-transmit-from-devices-with-no-checksum.patch

@@ -65,7 +65,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  		}
 --- a/net/ipv4/udp_offload.c
 +++ b/net/ipv4/udp_offload.c
-@@ -380,6 +380,14 @@ struct sk_buff *__udp_gso_segment(struct
+@@ -384,6 +384,14 @@ struct sk_buff *__udp_gso_segment(struct
  	else
  		uh->check = gso_make_checksum(seg, ~check) ? : CSUM_MANGLED_0;
  

target/linux/generic/backport-6.6/790-02-v6.7-net-dsa-mt753x-remove-mt753x_phylink_pcs_link_up.patch

@@ -24,7 +24,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
 
 --- a/drivers/net/dsa/mt7530.c
 +++ b/drivers/net/dsa/mt7530.c
-@@ -3037,15 +3037,6 @@ static void mt753x_phylink_mac_link_down
+@@ -3033,15 +3033,6 @@ static void mt753x_phylink_mac_link_down
  	mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK);
  }
  
@@ -40,7 +40,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  static void mt753x_phylink_mac_link_up(struct dsa_switch *ds, int port,
  				       unsigned int mode,
  				       phy_interface_t interface,
-@@ -3133,8 +3124,6 @@ mt7531_cpu_port_config(struct dsa_switch
+@@ -3129,8 +3120,6 @@ mt7531_cpu_port_config(struct dsa_switch
  		return ret;
  	mt7530_write(priv, MT7530_PMCR_P(port),
  		     PMCR_CPU_PORT_SETTING(priv->id));

target/linux/generic/backport-6.6/790-05-v6.9-net-dsa-mt7530-always-trap-frames-to-active-CPU-port.patch

@@ -49,7 +49,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  	/* Add the CPU port to the CPU port bitmap for MT7531 and the switch on
  	 * the MT7988 SoC. Trapped frames will be forwarded to the CPU port that
  	 * is affine to the inbound user port.
-@@ -3305,6 +3301,36 @@ static int mt753x_set_mac_eee(struct dsa
+@@ -3301,6 +3297,36 @@ static int mt753x_set_mac_eee(struct dsa
  	return 0;
  }
  
@@ -86,7 +86,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  static int mt7988_pad_setup(struct dsa_switch *ds, phy_interface_t interface)
  {
  	return 0;
-@@ -3360,6 +3386,7 @@ const struct dsa_switch_ops mt7530_switc
+@@ -3356,6 +3382,7 @@ const struct dsa_switch_ops mt7530_switc
  	.phylink_mac_link_up	= mt753x_phylink_mac_link_up,
  	.get_mac_eee		= mt753x_get_mac_eee,
  	.set_mac_eee		= mt753x_set_mac_eee,

target/linux/generic/backport-6.6/790-07-v6.9-net-dsa-mt7530-store-port-5-SGMII-capability-of-MT75.patch

@@ -100,7 +100,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  	default:
  		return "unknown";
  	}
-@@ -2694,6 +2680,12 @@ mt7531_setup(struct dsa_switch *ds)
+@@ -2695,6 +2681,12 @@ mt7531_setup(struct dsa_switch *ds)
  		return -ENODEV;
  	}
  
@@ -113,7 +113,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  	/* all MACs must be forced link-down before sw reset */
  	for (i = 0; i < MT7530_NUM_PORTS; i++)
  		mt7530_write(priv, MT7530_PMCR_P(i), MT7531_FORCE_LNK);
-@@ -2703,21 +2695,18 @@ mt7531_setup(struct dsa_switch *ds)
+@@ -2704,21 +2696,18 @@ mt7531_setup(struct dsa_switch *ds)
  		     SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST |
  		     SYS_CTRL_REG_RST);
  
@@ -141,7 +141,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  
  	mt7530_rmw(priv, MT7531_GPIO_MODE0, MT7531_GPIO0_MASK,
  		   MT7531_GPIO0_INTERRUPT);
-@@ -2784,11 +2773,6 @@ static void mt7530_mac_port_get_caps(str
+@@ -2780,11 +2769,6 @@ static void mt7530_mac_port_get_caps(str
  	}
  }
  
@@ -153,7 +153,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  static void mt7531_mac_port_get_caps(struct dsa_switch *ds, int port,
  				     struct phylink_config *config)
  {
-@@ -2801,7 +2785,7 @@ static void mt7531_mac_port_get_caps(str
+@@ -2797,7 +2781,7 @@ static void mt7531_mac_port_get_caps(str
  		break;
  
  	case 5: /* 2nd cpu port supports either rgmii or sgmii/8023z */
@@ -162,7 +162,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  			phy_interface_set_rgmii(config->supported_interfaces);
  			break;
  		}
-@@ -2868,7 +2852,7 @@ static int mt7531_rgmii_setup(struct mt7
+@@ -2864,7 +2848,7 @@ static int mt7531_rgmii_setup(struct mt7
  {
  	u32 val;
  
@@ -171,7 +171,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  		dev_err(priv->dev, "RGMII mode is not available for port %d\n",
  			port);
  		return -EINVAL;
-@@ -3111,7 +3095,7 @@ mt7531_cpu_port_config(struct dsa_switch
+@@ -3107,7 +3091,7 @@ mt7531_cpu_port_config(struct dsa_switch
  
  	switch (port) {
  	case 5:
@@ -180,7 +180,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  			interface = PHY_INTERFACE_MODE_RGMII;
  		else
  			interface = PHY_INTERFACE_MODE_2500BASEX;
-@@ -3263,7 +3247,7 @@ mt753x_setup(struct dsa_switch *ds)
+@@ -3259,7 +3243,7 @@ mt753x_setup(struct dsa_switch *ds)
  		mt7530_free_irq_common(priv);
  
  	if (priv->create_sgmii) {

target/linux/generic/backport-6.6/790-08-v6.9-net-dsa-mt7530-improve-comments-regarding-switch-por.patch

@@ -37,7 +37,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
 
 --- a/drivers/net/dsa/mt7530.c
 +++ b/drivers/net/dsa/mt7530.c
-@@ -2751,12 +2751,14 @@ static void mt7530_mac_port_get_caps(str
+@@ -2747,12 +2747,14 @@ static void mt7530_mac_port_get_caps(str
  				     struct phylink_config *config)
  {
  	switch (port) {
@@ -54,7 +54,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  		phy_interface_set_rgmii(config->supported_interfaces);
  		__set_bit(PHY_INTERFACE_MODE_MII,
  			  config->supported_interfaces);
-@@ -2764,7 +2766,8 @@ static void mt7530_mac_port_get_caps(str
+@@ -2760,7 +2762,8 @@ static void mt7530_mac_port_get_caps(str
  			  config->supported_interfaces);
  		break;
  
@@ -64,7 +64,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  		__set_bit(PHY_INTERFACE_MODE_RGMII,
  			  config->supported_interfaces);
  		__set_bit(PHY_INTERFACE_MODE_TRGMII,
-@@ -2779,19 +2782,24 @@ static void mt7531_mac_port_get_caps(str
+@@ -2775,19 +2778,24 @@ static void mt7531_mac_port_get_caps(str
  	struct mt7530_priv *priv = ds->priv;
  
  	switch (port) {
@@ -92,7 +92,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  		__set_bit(PHY_INTERFACE_MODE_SGMII,
  			  config->supported_interfaces);
  		__set_bit(PHY_INTERFACE_MODE_1000BASEX,
-@@ -2810,11 +2818,13 @@ static void mt7988_mac_port_get_caps(str
+@@ -2806,11 +2814,13 @@ static void mt7988_mac_port_get_caps(str
  	phy_interface_zero(config->supported_interfaces);
  
  	switch (port) {
@@ -107,7 +107,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  	case 6:
  		__set_bit(PHY_INTERFACE_MODE_INTERNAL,
  			  config->supported_interfaces);
-@@ -2978,12 +2988,12 @@ mt753x_phylink_mac_config(struct dsa_swi
+@@ -2974,12 +2984,12 @@ mt753x_phylink_mac_config(struct dsa_swi
  	u32 mcr_cur, mcr_new;
  
  	switch (port) {
@@ -122,7 +122,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  		if (priv->p5_interface == state->interface)
  			break;
  
-@@ -2993,7 +3003,7 @@ mt753x_phylink_mac_config(struct dsa_swi
+@@ -2989,7 +2999,7 @@ mt753x_phylink_mac_config(struct dsa_swi
  		if (priv->p5_intf_sel != P5_DISABLED)
  			priv->p5_interface = state->interface;
  		break;

target/linux/generic/backport-6.6/790-15-v6.9-net-dsa-mt7530-call-port-6-setup-from-mt7530_mac_con.patch

@@ -79,7 +79,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  	return 0;
  }
  
-@@ -2826,11 +2830,10 @@ mt7530_mac_config(struct dsa_switch *ds,
+@@ -2822,11 +2826,10 @@ mt7530_mac_config(struct dsa_switch *ds,
  {
  	struct mt7530_priv *priv = ds->priv;
  

target/linux/generic/backport-6.6/790-16-v6.9-net-dsa-mt7530-remove-pad_setup-function-pointer.patch

@@ -47,7 +47,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  static void
  mt7531_pll_setup(struct mt7530_priv *priv)
  {
-@@ -2817,14 +2805,6 @@ static void mt7988_mac_port_get_caps(str
+@@ -2813,14 +2801,6 @@ static void mt7988_mac_port_get_caps(str
  }
  
  static int
@@ -62,7 +62,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  mt7530_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
  		  phy_interface_t interface)
  {
-@@ -2989,8 +2969,6 @@ mt753x_phylink_mac_config(struct dsa_swi
+@@ -2985,8 +2965,6 @@ mt753x_phylink_mac_config(struct dsa_swi
  		if (priv->p6_interface == state->interface)
  			break;
  
@@ -71,7 +71,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  		if (mt753x_mac_config(ds, port, mode, state) < 0)
  			goto unsupported;
  
-@@ -3307,11 +3285,6 @@ mt753x_conduit_state_change(struct dsa_s
+@@ -3303,11 +3281,6 @@ mt753x_conduit_state_change(struct dsa_s
  	mt7530_rmw(priv, MT7530_MFC, CPU_EN | CPU_PORT_MASK, val);
  }
  
@@ -83,7 +83,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  static int mt7988_setup(struct dsa_switch *ds)
  {
  	struct mt7530_priv *priv = ds->priv;
-@@ -3375,7 +3348,6 @@ const struct mt753x_info mt753x_table[]
+@@ -3371,7 +3344,6 @@ const struct mt753x_info mt753x_table[]
  		.phy_write_c22 = mt7530_phy_write_c22,
  		.phy_read_c45 = mt7530_phy_read_c45,
  		.phy_write_c45 = mt7530_phy_write_c45,
@@ -91,7 +91,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  		.mac_port_get_caps = mt7530_mac_port_get_caps,
  		.mac_port_config = mt7530_mac_config,
  	},
-@@ -3387,7 +3359,6 @@ const struct mt753x_info mt753x_table[]
+@@ -3383,7 +3355,6 @@ const struct mt753x_info mt753x_table[]
  		.phy_write_c22 = mt7530_phy_write_c22,
  		.phy_read_c45 = mt7530_phy_read_c45,
  		.phy_write_c45 = mt7530_phy_write_c45,
@@ -99,7 +99,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  		.mac_port_get_caps = mt7530_mac_port_get_caps,
  		.mac_port_config = mt7530_mac_config,
  	},
-@@ -3399,7 +3370,6 @@ const struct mt753x_info mt753x_table[]
+@@ -3395,7 +3366,6 @@ const struct mt753x_info mt753x_table[]
  		.phy_write_c22 = mt7531_ind_c22_phy_write,
  		.phy_read_c45 = mt7531_ind_c45_phy_read,
  		.phy_write_c45 = mt7531_ind_c45_phy_write,
@@ -107,7 +107,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  		.cpu_port_config = mt7531_cpu_port_config,
  		.mac_port_get_caps = mt7531_mac_port_get_caps,
  		.mac_port_config = mt7531_mac_config,
-@@ -3412,7 +3382,6 @@ const struct mt753x_info mt753x_table[]
+@@ -3408,7 +3378,6 @@ const struct mt753x_info mt753x_table[]
  		.phy_write_c22 = mt7531_ind_c22_phy_write,
  		.phy_read_c45 = mt7531_ind_c45_phy_read,
  		.phy_write_c45 = mt7531_ind_c45_phy_write,
@@ -115,7 +115,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  		.cpu_port_config = mt7988_cpu_port_config,
  		.mac_port_get_caps = mt7988_mac_port_get_caps,
  		.mac_port_config = mt7988_mac_config,
-@@ -3442,9 +3411,8 @@ mt7530_probe_common(struct mt7530_priv *
+@@ -3438,9 +3407,8 @@ mt7530_probe_common(struct mt7530_priv *
  	/* Sanity check if these required device operations are filled
  	 * properly.
  	 */

target/linux/generic/backport-6.6/790-17-v6.9-net-dsa-mt7530-correct-port-capabilities-of-MT7988.patch

@@ -25,7 +25,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
 
 --- a/drivers/net/dsa/mt7530.c
 +++ b/drivers/net/dsa/mt7530.c
-@@ -2790,7 +2790,7 @@ static void mt7988_mac_port_get_caps(str
+@@ -2786,7 +2786,7 @@ static void mt7988_mac_port_get_caps(str
  
  	switch (port) {
  	/* Ports which are connected to switch PHYs. There is no MII pinout. */

target/linux/generic/backport-6.6/790-18-v6.9-net-dsa-mt7530-do-not-clear-config-supported_interfa.patch

@@ -27,7 +27,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
 
 --- a/drivers/net/dsa/mt7530.c
 +++ b/drivers/net/dsa/mt7530.c
-@@ -2786,8 +2786,6 @@ static void mt7531_mac_port_get_caps(str
+@@ -2782,8 +2782,6 @@ static void mt7531_mac_port_get_caps(str
  static void mt7988_mac_port_get_caps(struct dsa_switch *ds, int port,
  				     struct phylink_config *config)
  {

target/linux/generic/backport-6.6/790-19-v6.9-net-dsa-mt7530-remove-.mac_port_config-for-MT7988-an.patch

@@ -33,7 +33,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
 
 --- a/drivers/net/dsa/mt7530.c
 +++ b/drivers/net/dsa/mt7530.c
-@@ -2869,17 +2869,6 @@ static bool mt753x_is_mac_port(u32 port)
+@@ -2865,17 +2865,6 @@ static bool mt753x_is_mac_port(u32 port)
  }
  
  static int
@@ -51,7 +51,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  mt7531_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
  		  phy_interface_t interface)
  {
-@@ -2919,6 +2908,9 @@ mt753x_mac_config(struct dsa_switch *ds,
+@@ -2915,6 +2904,9 @@ mt753x_mac_config(struct dsa_switch *ds,
  {
  	struct mt7530_priv *priv = ds->priv;
  
@@ -61,7 +61,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  	return priv->info->mac_port_config(ds, port, mode, state->interface);
  }
  
-@@ -3382,7 +3374,6 @@ const struct mt753x_info mt753x_table[]
+@@ -3378,7 +3370,6 @@ const struct mt753x_info mt753x_table[]
  		.phy_write_c45 = mt7531_ind_c45_phy_write,
  		.cpu_port_config = mt7988_cpu_port_config,
  		.mac_port_get_caps = mt7988_mac_port_get_caps,
@@ -69,7 +69,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  	},
  };
  EXPORT_SYMBOL_GPL(mt753x_table);
-@@ -3410,8 +3401,7 @@ mt7530_probe_common(struct mt7530_priv *
+@@ -3406,8 +3397,7 @@ mt7530_probe_common(struct mt7530_priv *
  	 * properly.
  	 */
  	if (!priv->info->sw_setup || !priv->info->phy_read_c22 ||

target/linux/generic/backport-6.6/790-21-v6.9-net-dsa-mt7530-do-not-use-SW_PHY_RST-to-reset-MT7531.patch

@@ -22,7 +22,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
 
 --- a/drivers/net/dsa/mt7530.c
 +++ b/drivers/net/dsa/mt7530.c
-@@ -2657,14 +2657,12 @@ mt7531_setup(struct dsa_switch *ds)
+@@ -2658,14 +2658,12 @@ mt7531_setup(struct dsa_switch *ds)
  	val = mt7530_read(priv, MT7531_TOP_SIG_SR);
  	priv->p5_sgmii = !!(val & PAD_DUAL_SGMII_EN);
  

target/linux/generic/backport-6.6/790-22-v6.9-net-dsa-mt7530-get-rid-of-useless-error-returns-on-p.patch

@@ -36,7 +36,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
 
 --- a/drivers/net/dsa/mt7530.c
 +++ b/drivers/net/dsa/mt7530.c
-@@ -2800,7 +2800,7 @@ static void mt7988_mac_port_get_caps(str
+@@ -2796,7 +2796,7 @@ static void mt7988_mac_port_get_caps(str
  	}
  }
  
@@ -45,7 +45,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  mt7530_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
  		  phy_interface_t interface)
  {
-@@ -2810,22 +2810,14 @@ mt7530_mac_config(struct dsa_switch *ds,
+@@ -2806,22 +2806,14 @@ mt7530_mac_config(struct dsa_switch *ds,
  		mt7530_setup_port5(priv->ds, interface);
  	else if (port == 6)
  		mt7530_setup_port6(priv->ds, interface);
@@ -71,7 +71,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  	val = mt7530_read(priv, MT7531_CLKGEN_CTRL);
  	val |= GP_CLK_EN;
  	val &= ~GP_MODE_MASK;
-@@ -2853,20 +2845,14 @@ static int mt7531_rgmii_setup(struct mt7
+@@ -2849,20 +2841,14 @@ static int mt7531_rgmii_setup(struct mt7
  		case PHY_INTERFACE_MODE_RGMII_ID:
  			break;
  		default:
@@ -95,7 +95,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  mt7531_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
  		  phy_interface_t interface)
  {
-@@ -2874,42 +2860,21 @@ mt7531_mac_config(struct dsa_switch *ds,
+@@ -2870,42 +2856,21 @@ mt7531_mac_config(struct dsa_switch *ds,
  	struct phy_device *phydev;
  	struct dsa_port *dp;
  
@@ -143,7 +143,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  }
  
  static struct phylink_pcs *
-@@ -2938,17 +2903,11 @@ mt753x_phylink_mac_config(struct dsa_swi
+@@ -2934,17 +2899,11 @@ mt753x_phylink_mac_config(struct dsa_swi
  	u32 mcr_cur, mcr_new;
  
  	switch (port) {
@@ -162,7 +162,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  
  		if (priv->p5_intf_sel != P5_DISABLED)
  			priv->p5_interface = state->interface;
-@@ -2957,16 +2916,10 @@ mt753x_phylink_mac_config(struct dsa_swi
+@@ -2953,16 +2912,10 @@ mt753x_phylink_mac_config(struct dsa_swi
  		if (priv->p6_interface == state->interface)
  			break;
  
@@ -180,7 +180,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  	}
  
  	mcr_cur = mt7530_read(priv, MT7530_PMCR_P(port));
-@@ -3049,7 +3002,6 @@ mt7531_cpu_port_config(struct dsa_switch
+@@ -3045,7 +2998,6 @@ mt7531_cpu_port_config(struct dsa_switch
  	struct mt7530_priv *priv = ds->priv;
  	phy_interface_t interface;
  	int speed;
@@ -188,7 +188,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  
  	switch (port) {
  	case 5:
-@@ -3074,9 +3026,8 @@ mt7531_cpu_port_config(struct dsa_switch
+@@ -3070,9 +3022,8 @@ mt7531_cpu_port_config(struct dsa_switch
  	else
  		speed = SPEED_1000;
  

target/linux/generic/backport-6.6/790-23-v6.9-net-dsa-mt7530-get-rid-of-priv-info-cpu_port_config.patch

@@ -117,7 +117,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  		} else {
  			mt7530_port_disable(ds, i);
  
-@@ -2680,10 +2664,6 @@ mt7531_setup(struct dsa_switch *ds)
+@@ -2681,10 +2665,6 @@ mt7531_setup(struct dsa_switch *ds)
  	mt7530_rmw(priv, MT7531_GPIO_MODE0, MT7531_GPIO0_MASK,
  		   MT7531_GPIO0_INTERRUPT);
  
@@ -128,7 +128,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  	/* Enable Energy-Efficient Ethernet (EEE) and PHY core PLL, since
  	 * phy_device has not yet been created provided for
  	 * phy_[read,write]_mmd_indirect is called, we provide our own
-@@ -2902,26 +2882,9 @@ mt753x_phylink_mac_config(struct dsa_swi
+@@ -2898,26 +2878,9 @@ mt753x_phylink_mac_config(struct dsa_swi
  	struct mt7530_priv *priv = ds->priv;
  	u32 mcr_cur, mcr_new;
  
@@ -156,7 +156,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  	mcr_cur = mt7530_read(priv, MT7530_PMCR_P(port));
  	mcr_new = mcr_cur;
  	mcr_new &= ~PMCR_LINK_SETTINGS_MASK;
-@@ -2957,17 +2920,10 @@ static void mt753x_phylink_mac_link_up(s
+@@ -2953,17 +2916,10 @@ static void mt753x_phylink_mac_link_up(s
  
  	mcr = PMCR_RX_EN | PMCR_TX_EN | PMCR_FORCE_LNK;
  
@@ -176,7 +176,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  		mcr |= PMCR_FORCE_SPEED_1000;
  		break;
  	case SPEED_100:
-@@ -2985,6 +2941,7 @@ static void mt753x_phylink_mac_link_up(s
+@@ -2981,6 +2937,7 @@ static void mt753x_phylink_mac_link_up(s
  	if (mode == MLO_AN_PHY && phydev && phy_init_eee(phydev, false) >= 0) {
  		switch (speed) {
  		case SPEED_1000:
@@ -184,7 +184,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  			mcr |= PMCR_FORCE_EEE1G;
  			break;
  		case SPEED_100:
-@@ -2996,61 +2953,6 @@ static void mt753x_phylink_mac_link_up(s
+@@ -2992,61 +2949,6 @@ static void mt753x_phylink_mac_link_up(s
  	mt7530_set(priv, MT7530_PMCR_P(port), mcr);
  }
  
@@ -246,7 +246,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  static void mt753x_phylink_get_caps(struct dsa_switch *ds, int port,
  				    struct phylink_config *config)
  {
-@@ -3309,7 +3211,6 @@ const struct mt753x_info mt753x_table[]
+@@ -3305,7 +3207,6 @@ const struct mt753x_info mt753x_table[]
  		.phy_write_c22 = mt7531_ind_c22_phy_write,
  		.phy_read_c45 = mt7531_ind_c45_phy_read,
  		.phy_write_c45 = mt7531_ind_c45_phy_write,
@@ -254,7 +254,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  		.mac_port_get_caps = mt7531_mac_port_get_caps,
  		.mac_port_config = mt7531_mac_config,
  	},
-@@ -3321,7 +3222,6 @@ const struct mt753x_info mt753x_table[]
+@@ -3317,7 +3218,6 @@ const struct mt753x_info mt753x_table[]
  		.phy_write_c22 = mt7531_ind_c22_phy_write,
  		.phy_read_c45 = mt7531_ind_c45_phy_read,
  		.phy_write_c45 = mt7531_ind_c45_phy_write,

target/linux/generic/backport-6.6/790-24-v6.9-net-dsa-mt7530-get-rid-of-mt753x_mac_config.patch

@@ -18,7 +18,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
 
 --- a/drivers/net/dsa/mt7530.c
 +++ b/drivers/net/dsa/mt7530.c
-@@ -2847,16 +2847,6 @@ mt7531_mac_config(struct dsa_switch *ds,
+@@ -2843,16 +2843,6 @@ mt7531_mac_config(struct dsa_switch *ds,
  	}
  }
  
@@ -35,7 +35,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  static struct phylink_pcs *
  mt753x_phylink_mac_select_pcs(struct dsa_switch *ds, int port,
  			      phy_interface_t interface)
-@@ -2882,8 +2872,8 @@ mt753x_phylink_mac_config(struct dsa_swi
+@@ -2878,8 +2868,8 @@ mt753x_phylink_mac_config(struct dsa_swi
  	struct mt7530_priv *priv = ds->priv;
  	u32 mcr_cur, mcr_new;
  

target/linux/generic/backport-6.6/790-25-v6.9-net-dsa-mt7530-put-initialising-PCS-devices-code-bac.patch

@@ -20,7 +20,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
 
 --- a/drivers/net/dsa/mt7530.c
 +++ b/drivers/net/dsa/mt7530.c
-@@ -3025,17 +3025,9 @@ static int
+@@ -3021,17 +3021,9 @@ static int
  mt753x_setup(struct dsa_switch *ds)
  {
  	struct mt7530_priv *priv = ds->priv;
@@ -40,7 +40,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  	if (ret)
  		return ret;
  
-@@ -3047,6 +3039,14 @@ mt753x_setup(struct dsa_switch *ds)
+@@ -3043,6 +3035,14 @@ mt753x_setup(struct dsa_switch *ds)
  	if (ret && priv->irq)
  		mt7530_free_irq_common(priv);
  

target/linux/generic/backport-6.6/790-27-v6.9-net-dsa-mt7530-simplify-link-operations.patch

@@ -45,7 +45,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
 
 --- a/drivers/net/dsa/mt7530.c
 +++ b/drivers/net/dsa/mt7530.c
-@@ -2880,23 +2880,13 @@ mt753x_phylink_mac_config(struct dsa_swi
+@@ -2876,23 +2876,13 @@ mt753x_phylink_mac_config(struct dsa_swi
  			  const struct phylink_link_state *state)
  {
  	struct mt7530_priv *priv = ds->priv;

target/linux/generic/backport-6.6/790-33-v6.10-net-dsa-mt7530-provide-own-phylink-MAC-operations.patch

@@ -19,7 +19,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
 
 --- a/drivers/net/dsa/mt7530.c
 +++ b/drivers/net/dsa/mt7530.c
-@@ -2858,28 +2858,34 @@ mt7531_mac_config(struct dsa_switch *ds,
+@@ -2854,28 +2854,34 @@ mt7531_mac_config(struct dsa_switch *ds,
  }
  
  static struct phylink_pcs *
@@ -60,7 +60,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  
  	if ((port == 5 || port == 6) && priv->info->mac_port_config)
  		priv->info->mac_port_config(ds, port, mode, state->interface);
-@@ -2889,23 +2895,25 @@ mt753x_phylink_mac_config(struct dsa_swi
+@@ -2885,23 +2891,25 @@ mt753x_phylink_mac_config(struct dsa_swi
  		mt7530_set(priv, MT7530_PMCR_P(port), PMCR_EXT_PHY);
  }
  
@@ -92,7 +92,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  	u32 mcr;
  
  	mcr = PMCR_RX_EN | PMCR_TX_EN | PMCR_FORCE_LNK;
-@@ -2940,7 +2948,7 @@ static void mt753x_phylink_mac_link_up(s
+@@ -2936,7 +2944,7 @@ static void mt753x_phylink_mac_link_up(s
  		}
  	}
  
@@ -101,7 +101,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  }
  
  static void mt753x_phylink_get_caps(struct dsa_switch *ds, int port,
-@@ -3160,16 +3168,19 @@ const struct dsa_switch_ops mt7530_switc
+@@ -3156,16 +3164,19 @@ const struct dsa_switch_ops mt7530_switc
  	.port_mirror_add	= mt753x_port_mirror_add,
  	.port_mirror_del	= mt753x_port_mirror_del,
  	.phylink_get_caps	= mt753x_phylink_get_caps,
@@ -125,7 +125,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  const struct mt753x_info mt753x_table[] = {
  	[ID_MT7621] = {
  		.id = ID_MT7621,
-@@ -3247,6 +3258,7 @@ mt7530_probe_common(struct mt7530_priv *
+@@ -3243,6 +3254,7 @@ mt7530_probe_common(struct mt7530_priv *
  	priv->dev = dev;
  	priv->ds->priv = priv;
  	priv->ds->ops = &mt7530_switch_ops;

target/linux/generic/backport-6.6/790-36-v6.10-net-dsa-mt7530-mdio-read-PHY-address-of-switch-from-.patch

@@ -184,7 +184,7 @@ Signed-off-by: Paolo Abeni <[email protected]>
  err:
  	if (ret < 0)
  		dev_err(&bus->dev,
-@@ -2679,16 +2687,19 @@ mt7531_setup(struct dsa_switch *ds)
+@@ -2680,16 +2688,19 @@ mt7531_setup(struct dsa_switch *ds)
  	 * phy_[read,write]_mmd_indirect is called, we provide our own
  	 * mt7531_ind_mmd_phy_[read,write] to complete this function.
  	 */

target/linux/generic/backport-6.6/790-39-v6.10-net-dsa-mt7530-refactor-MT7530_PMCR_P.patch

@@ -64,7 +64,7 @@ Signed-off-by: Arınç ÜNAL <[email protected]>
  
  		/* Disable forwarding by default on all ports */
  		mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK,
-@@ -2639,7 +2639,7 @@ mt7531_setup(struct dsa_switch *ds)
+@@ -2640,7 +2640,7 @@ mt7531_setup(struct dsa_switch *ds)
  
  	/* Force link down on all ports before internal reset */
  	for (i = 0; i < MT7530_NUM_PORTS; i++)
@@ -73,7 +73,7 @@ Signed-off-by: Arınç ÜNAL <[email protected]>
  
  	/* Reset the switch through internal reset */
  	mt7530_write(priv, MT7530_SYS_CTRL, SYS_CTRL_SW_RST | SYS_CTRL_REG_RST);
-@@ -2881,7 +2881,7 @@ mt753x_phylink_mac_config(struct phylink
+@@ -2877,7 +2877,7 @@ mt753x_phylink_mac_config(struct phylink
  
  	/* Are we connected to external phy */
  	if (port == 5 && dsa_is_user_port(ds, 5))
@@ -82,7 +82,7 @@ Signed-off-by: Arınç ÜNAL <[email protected]>
  }
  
  static void mt753x_phylink_mac_link_down(struct phylink_config *config,
-@@ -2891,7 +2891,7 @@ static void mt753x_phylink_mac_link_down
+@@ -2887,7 +2887,7 @@ static void mt753x_phylink_mac_link_down
  	struct dsa_port *dp = dsa_phylink_to_port(config);
  	struct mt7530_priv *priv = dp->ds->priv;
  
@@ -91,7 +91,7 @@ Signed-off-by: Arınç ÜNAL <[email protected]>
  }
  
  static void mt753x_phylink_mac_link_up(struct phylink_config *config,
-@@ -2905,7 +2905,7 @@ static void mt753x_phylink_mac_link_up(s
+@@ -2901,7 +2901,7 @@ static void mt753x_phylink_mac_link_up(s
  	struct mt7530_priv *priv = dp->ds->priv;
  	u32 mcr;
  
@@ -100,7 +100,7 @@ Signed-off-by: Arınç ÜNAL <[email protected]>
  
  	switch (speed) {
  	case SPEED_1000:
-@@ -2920,9 +2920,9 @@ static void mt753x_phylink_mac_link_up(s
+@@ -2916,9 +2916,9 @@ static void mt753x_phylink_mac_link_up(s
  	if (duplex == DUPLEX_FULL) {
  		mcr |= PMCR_FORCE_FDX;
  		if (tx_pause)
@@ -112,7 +112,7 @@ Signed-off-by: Arınç ÜNAL <[email protected]>
  	}
  
  	if (mode == MLO_AN_PHY && phydev && phy_init_eee(phydev, false) >= 0) {
-@@ -2937,7 +2937,7 @@ static void mt753x_phylink_mac_link_up(s
+@@ -2933,7 +2933,7 @@ static void mt753x_phylink_mac_link_up(s
  		}
  	}
  

target/linux/generic/backport-6.6/790-40-v6.10-net-dsa-mt7530-rename-p5_intf_sel-and-use-only-for-M.patch

@@ -135,7 +135,7 @@ Signed-off-by: Arınç ÜNAL <[email protected]>
  			mt7530_setup_port5(ds, interface);
  	}
  
-@@ -2654,9 +2647,6 @@ mt7531_setup(struct dsa_switch *ds)
+@@ -2655,9 +2648,6 @@ mt7531_setup(struct dsa_switch *ds)
  			   MT7531_EXT_P_MDIO_12);
  	}
  

target/linux/generic/backport-6.6/790-42-v6.10-net-dsa-mt7530-refactor-MT7530_MFC-and-MT7531_CFC-ad.patch

@@ -101,7 +101,7 @@ Signed-off-by: Arınç ÜNAL <[email protected]>
  		     UNU_FFP_MASK);
  
  	for (i = 0; i < MT7530_NUM_PORTS; i++) {
-@@ -3089,10 +3075,12 @@ mt753x_conduit_state_change(struct dsa_s
+@@ -3085,10 +3071,12 @@ mt753x_conduit_state_change(struct dsa_s
  	else
  		priv->active_cpu_ports &= ~mask;
  

target/linux/generic/backport-6.6/790-43-v6.10-net-dsa-mt7530-refactor-MT7530_HWTRAP-and-MT7530_MHW.patch

@@ -189,7 +189,7 @@ Signed-off-by: Arınç ÜNAL <[email protected]>
  		mt7530_pll_setup(priv);
  
  	mt753x_trap_frames(priv);
-@@ -2586,7 +2587,7 @@ mt7531_setup(struct dsa_switch *ds)
+@@ -2587,7 +2588,7 @@ mt7531_setup(struct dsa_switch *ds)
  	}
  
  	/* Waiting for MT7530 got to stable */

target/linux/generic/backport-6.6/790-45-v6.10-net-dsa-mt7530-return-mt7530_setup_mdio-mt7531_setup.patch

@@ -17,7 +17,7 @@ Signed-off-by: Arınç ÜNAL <[email protected]>
 
 --- a/drivers/net/dsa/mt7530.c
 +++ b/drivers/net/dsa/mt7530.c
-@@ -2667,7 +2667,9 @@ mt7531_setup(struct dsa_switch *ds)
+@@ -2668,7 +2668,9 @@ mt7531_setup(struct dsa_switch *ds)
  					 0);
  	}
  
@@ -26,9 +26,9 @@ Signed-off-by: Arınç ÜNAL <[email protected]>
 +	if (ret)
 +		return ret;
  
- 	/* Setup VLAN ID 0 for VLAN-unaware bridges */
- 	ret = mt7530_setup_vlan0(priv);
-@@ -3020,6 +3022,8 @@ mt753x_setup(struct dsa_switch *ds)
+ 	ds->assisted_learning_on_cpu_port = true;
+ 	ds->mtu_enforcement_ingress = true;
+@@ -3016,6 +3018,8 @@ mt753x_setup(struct dsa_switch *ds)
  	ret = mt7530_setup_mdio(priv);
  	if (ret && priv->irq)
  		mt7530_free_irq_common(priv);

target/linux/generic/backport-6.6/790-46-v6.10-net-dsa-mt7530-define-MAC-speed-capabilities-per-swi.patch

@@ -24,7 +24,7 @@ Signed-off-by: Arınç ÜNAL <[email protected]>
 
 --- a/drivers/net/dsa/mt7530.c
 +++ b/drivers/net/dsa/mt7530.c
-@@ -2685,6 +2685,8 @@ mt7531_setup(struct dsa_switch *ds)
+@@ -2681,6 +2681,8 @@ mt7531_setup(struct dsa_switch *ds)
  static void mt7530_mac_port_get_caps(struct dsa_switch *ds, int port,
  				     struct phylink_config *config)
  {
@@ -33,7 +33,7 @@ Signed-off-by: Arınç ÜNAL <[email protected]>
  	switch (port) {
  	/* Ports which are connected to switch PHYs. There is no MII pinout. */
  	case 0 ... 4:
-@@ -2716,6 +2718,8 @@ static void mt7531_mac_port_get_caps(str
+@@ -2712,6 +2714,8 @@ static void mt7531_mac_port_get_caps(str
  {
  	struct mt7530_priv *priv = ds->priv;
  
@@ -42,7 +42,7 @@ Signed-off-by: Arınç ÜNAL <[email protected]>
  	switch (port) {
  	/* Ports which are connected to switch PHYs. There is no MII pinout. */
  	case 0 ... 4:
-@@ -2755,14 +2759,17 @@ static void mt7988_mac_port_get_caps(str
+@@ -2751,14 +2755,17 @@ static void mt7988_mac_port_get_caps(str
  	case 0 ... 3:
  		__set_bit(PHY_INTERFACE_MODE_INTERNAL,
  			  config->supported_interfaces);
@@ -62,7 +62,7 @@ Signed-off-by: Arınç ÜNAL <[email protected]>
  	}
  }
  
-@@ -2932,9 +2939,7 @@ static void mt753x_phylink_get_caps(stru
+@@ -2928,9 +2935,7 @@ static void mt753x_phylink_get_caps(stru
  {
  	struct mt7530_priv *priv = ds->priv;
  

target/linux/generic/backport-6.6/790-47-v6.10-net-dsa-mt7530-get-rid-of-function-sanity-check.patch

@@ -17,7 +17,7 @@ Signed-off-by: Arınç ÜNAL <[email protected]>
 
 --- a/drivers/net/dsa/mt7530.c
 +++ b/drivers/net/dsa/mt7530.c
-@@ -3232,13 +3232,6 @@ mt7530_probe_common(struct mt7530_priv *
+@@ -3228,13 +3228,6 @@ mt7530_probe_common(struct mt7530_priv *
  	if (!priv->info)
  		return -EINVAL;
  

target/linux/generic/backport-6.6/790-48-v6.10-net-dsa-mt7530-refactor-MT7530_PMEEECR_P.patch

@@ -19,7 +19,7 @@ Signed-off-by: Arınç ÜNAL <[email protected]>
 
 --- a/drivers/net/dsa/mt7530.c
 +++ b/drivers/net/dsa/mt7530.c
-@@ -3051,10 +3051,10 @@ static int mt753x_get_mac_eee(struct dsa
+@@ -3047,10 +3047,10 @@ static int mt753x_get_mac_eee(struct dsa
  			      struct ethtool_eee *e)
  {
  	struct mt7530_priv *priv = ds->priv;
@@ -32,7 +32,7 @@ Signed-off-by: Arınç ÜNAL <[email protected]>
  
  	return 0;
  }
-@@ -3068,11 +3068,11 @@ static int mt753x_set_mac_eee(struct dsa
+@@ -3064,11 +3064,11 @@ static int mt753x_set_mac_eee(struct dsa
  	if (e->tx_lpi_timer > 0xFFF)
  		return -EINVAL;
  

target/linux/generic/backport-6.6/790-50-v6.10-net-dsa-mt7530-use-priv-ds-num_ports-instead-of-MT75.patch

@@ -46,7 +46,7 @@ Signed-off-by: Arınç ÜNAL <[email protected]>
  		/* Clear link settings and enable force mode to force link down
  		 * on all ports until they're enabled later.
  		 */
-@@ -2626,7 +2626,7 @@ mt7531_setup(struct dsa_switch *ds)
+@@ -2627,7 +2627,7 @@ mt7531_setup(struct dsa_switch *ds)
  	priv->p5_sgmii = !!(val & PAD_DUAL_SGMII_EN);
  
  	/* Force link down on all ports before internal reset */

target/linux/generic/backport-6.6/790-51-v6.10-net-dsa-mt7530-do-not-pass-port-variable-to-mt7531_r.patch

@@ -17,7 +17,7 @@ Signed-off-by: Arınç ÜNAL <[email protected]>
 
 --- a/drivers/net/dsa/mt7530.c
 +++ b/drivers/net/dsa/mt7530.c
-@@ -2785,7 +2785,7 @@ mt7530_mac_config(struct dsa_switch *ds,
+@@ -2781,7 +2781,7 @@ mt7530_mac_config(struct dsa_switch *ds,
  		mt7530_setup_port6(priv->ds, interface);
  }
  
@@ -26,7 +26,7 @@ Signed-off-by: Arınç ÜNAL <[email protected]>
  			       phy_interface_t interface,
  			       struct phy_device *phydev)
  {
-@@ -2836,7 +2836,7 @@ mt7531_mac_config(struct dsa_switch *ds,
+@@ -2832,7 +2832,7 @@ mt7531_mac_config(struct dsa_switch *ds,
  	if (phy_interface_mode_is_rgmii(interface)) {
  		dp = dsa_to_port(ds, port);
  		phydev = dp->slave->phydev;

target/linux/generic/backport-6.6/790-52-v6.10-net-dsa-mt7530-explain-exposing-MDIO-bus-of-MT7531AE.patch

@@ -19,7 +19,7 @@ Signed-off-by: Arınç ÜNAL <[email protected]>
 
 --- a/drivers/net/dsa/mt7530.c
 +++ b/drivers/net/dsa/mt7530.c
-@@ -2635,7 +2635,10 @@ mt7531_setup(struct dsa_switch *ds)
+@@ -2636,7 +2636,10 @@ mt7531_setup(struct dsa_switch *ds)
  	if (!priv->p5_sgmii) {
  		mt7531_pll_setup(priv);
  	} else {

target/linux/generic/pending-6.6/680-net-add-TCP-fraglist-GRO-support.patch

@@ -81,7 +81,7 @@ Signe-off-by: Felix Fietkau <[email protected]>
  {
 --- a/net/ipv4/tcp_offload.c
 +++ b/net/ipv4/tcp_offload.c
-@@ -28,6 +28,70 @@ static void tcp_gso_tstamp(struct sk_buf
+@@ -31,6 +31,70 @@ static void tcp_gso_tstamp(struct sk_buf
  	}
  }
  
@@ -152,7 +152,7 @@ Signe-off-by: Felix Fietkau <[email protected]>
  static struct sk_buff *tcp4_gso_segment(struct sk_buff *skb,
  					netdev_features_t features)
  {
-@@ -37,6 +101,9 @@ static struct sk_buff *tcp4_gso_segment(
+@@ -40,6 +104,9 @@ static struct sk_buff *tcp4_gso_segment(
  	if (!pskb_may_pull(skb, sizeof(struct tcphdr)))
  		return ERR_PTR(-EINVAL);
  
@@ -162,7 +162,7 @@ Signe-off-by: Felix Fietkau <[email protected]>
  	if (unlikely(skb->ip_summed != CHECKSUM_PARTIAL)) {
  		const struct iphdr *iph = ip_hdr(skb);
  		struct tcphdr *th = tcp_hdr(skb);
-@@ -181,61 +248,76 @@ out:
+@@ -184,61 +251,76 @@ out:
  	return segs;
  }
  
@@ -269,7 +269,7 @@ Signe-off-by: Felix Fietkau <[email protected]>
  	flush = NAPI_GRO_CB(p)->flush;
  	flush |= (__force int)(flags & TCP_FLAG_CWR);
  	flush |= (__force int)((flags ^ tcp_flag_word(th2)) &
-@@ -272,6 +354,19 @@ found:
+@@ -275,6 +357,19 @@ found:
  	flush |= p->decrypted ^ skb->decrypted;
  #endif
  
@@ -289,7 +289,7 @@ Signe-off-by: Felix Fietkau <[email protected]>
  	if (flush || skb_gro_receive(p, skb)) {
  		mss = 1;
  		goto out_check_final;
-@@ -293,7 +388,6 @@ out_check_final:
+@@ -296,7 +391,6 @@ out_check_final:
  	if (p && (!NAPI_GRO_CB(skb)->same_flow || flush))
  		pp = p;
  
@@ -297,7 +297,7 @@ Signe-off-by: Felix Fietkau <[email protected]>
  	NAPI_GRO_CB(skb)->flush |= (flush != 0);
  
  	return pp;
-@@ -317,18 +411,58 @@ void tcp_gro_complete(struct sk_buff *sk
+@@ -320,18 +414,58 @@ void tcp_gro_complete(struct sk_buff *sk
  }
  EXPORT_SYMBOL(tcp_gro_complete);
  
@@ -361,7 +361,7 @@ Signe-off-by: Felix Fietkau <[email protected]>
  }
  
  INDIRECT_CALLABLE_SCOPE int tcp4_gro_complete(struct sk_buff *skb, int thoff)
-@@ -336,6 +470,15 @@ INDIRECT_CALLABLE_SCOPE int tcp4_gro_com
+@@ -339,6 +473,15 @@ INDIRECT_CALLABLE_SCOPE int tcp4_gro_com
  	const struct iphdr *iph = ip_hdr(skb);
  	struct tcphdr *th = tcp_hdr(skb);
  
@@ -379,7 +379,7 @@ Signe-off-by: Felix Fietkau <[email protected]>
  	skb_shinfo(skb)->gso_type |= SKB_GSO_TCPV4;
 --- a/net/ipv4/udp_offload.c
 +++ b/net/ipv4/udp_offload.c
-@@ -470,33 +470,6 @@ out:
+@@ -474,33 +474,6 @@ out:
  	return segs;
  }
  

target/linux/generic/pending-6.6/685-net-gso-fix-tcp-fraglist-segmentation-after-pull-fro.patch

@@ -36,7 +36,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
 
 --- a/net/ipv4/tcp_offload.c
 +++ b/net/ipv4/tcp_offload.c
-@@ -101,8 +101,14 @@ static struct sk_buff *tcp4_gso_segment(
+@@ -104,8 +104,14 @@ static struct sk_buff *tcp4_gso_segment(
  	if (!pskb_may_pull(skb, sizeof(struct tcphdr)))
  		return ERR_PTR(-EINVAL);
  

target/linux/ipq40xx/patches-6.6/999-atm-mpoa-intel-dsl-phy-support.patch

@@ -4,7 +4,7 @@ Subject: [PATCH] UGW_SW-29163: ATM oam support
 
 --- a/drivers/net/ppp/ppp_generic.c
 +++ b/drivers/net/ppp/ppp_generic.c
-@@ -2968,6 +2968,22 @@ char *ppp_dev_name(struct ppp_channel *c
+@@ -2978,6 +2978,22 @@ char *ppp_dev_name(struct ppp_channel *c
  	return name;
  }
  
@@ -27,7 +27,7 @@ Subject: [PATCH] UGW_SW-29163: ATM oam support
  
  /*
   * Disconnect a channel from the generic layer.
-@@ -3614,6 +3630,7 @@ EXPORT_SYMBOL(ppp_unregister_channel);
+@@ -3624,6 +3640,7 @@ EXPORT_SYMBOL(ppp_unregister_channel);
  EXPORT_SYMBOL(ppp_channel_index);
  EXPORT_SYMBOL(ppp_unit_number);
  EXPORT_SYMBOL(ppp_dev_name);

target/linux/rockchip/patches-6.6/034-v6.7-usb-dwc3-add-optional-PHY-interface-clocks.patch

@@ -18,7 +18,7 @@ Signed-off-by: Greg Kroah-Hartman <[email protected]>
 
 --- a/drivers/usb/dwc3/core.c
 +++ b/drivers/usb/dwc3/core.c
-@@ -845,8 +845,20 @@ static int dwc3_clk_enable(struct dwc3 *
+@@ -860,8 +860,20 @@ static int dwc3_clk_enable(struct dwc3 *
  	if (ret)
  		goto disable_ref_clk;
  
@@ -39,7 +39,7 @@ Signed-off-by: Greg Kroah-Hartman <[email protected]>
  disable_ref_clk:
  	clk_disable_unprepare(dwc->ref_clk);
  disable_bus_clk:
-@@ -856,6 +868,8 @@ disable_bus_clk:
+@@ -871,6 +883,8 @@ disable_bus_clk:
  
  static void dwc3_clk_disable(struct dwc3 *dwc)
  {
@@ -48,7 +48,7 @@ Signed-off-by: Greg Kroah-Hartman <[email protected]>
  	clk_disable_unprepare(dwc->susp_clk);
  	clk_disable_unprepare(dwc->ref_clk);
  	clk_disable_unprepare(dwc->bus_clk);
-@@ -1875,6 +1889,20 @@ static int dwc3_get_clocks(struct dwc3 *
+@@ -1886,6 +1900,20 @@ static int dwc3_get_clocks(struct dwc3 *
  		}
  	}
  

target/linux/starfive/patches-6.6/0109-usb-xhci-To-improve-performance-usb-using-lowmem-for.patch

@@ -128,7 +128,7 @@ Signed-off-by: minda.chen <[email protected]>
  int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
  {
  	dma_addr_t	dma;
-@@ -2436,6 +2494,12 @@ int xhci_mem_init(struct xhci_hcd *xhci,
+@@ -2437,6 +2495,12 @@ int xhci_mem_init(struct xhci_hcd *xhci,
  
  	xhci->isoc_bei_interval = AVOID_BEI_INTERVAL_MAX;
  

target/linux/starfive/patches-6.6/0110-usb-xhci-using-dma_alloc_noncoherent-to-alloc-low-me.patch

@@ -71,7 +71,7 @@ Signed-off-by: Minda Chen <[email protected]>
  
  	INIT_LIST_HEAD(&xhci->cmd_list);
  
-@@ -2495,9 +2496,11 @@ int xhci_mem_init(struct xhci_hcd *xhci,
+@@ -2496,9 +2497,11 @@ int xhci_mem_init(struct xhci_hcd *xhci,
  	xhci->isoc_bei_interval = AVOID_BEI_INTERVAL_MAX;
  
  	if (xhci->quirks & XHCI_LOCAL_BUFFER) {