brcm63xx: add uart nodes

Now that we can register uarts through device-tree, add them to the dtsi
files.

Signed-off-by: Jonas Gorski <[email protected]>

target/linux/brcm63xx/dts/bcm3368.dtsi

@@ -7,6 +7,8 @@
 		pflash = &pflash;
 		gpio0 = &gpio0;
 		gpio1 = &gpio1;
+		serial0 = &uart0;
+		serial1 = &uart1;
 		spi0 = &lsspi;
 	};
 
@@ -93,6 +95,32 @@
 			#gpio-cells = <2>;
 		};
 
+		uart0: serial@fff8c100 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0xfff8c100 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <2>;
+
+			/* clocks = <&periph_clk>; */
+			/* clock-names = "refclk"; */
+
+			status = "disabled";
+		};
+
+		uart1: serial@fff8c120 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0xfff8c120 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <3>;
+
+			/* clocks = <&periph_clk>; */
+			/* clock-names = "refclk"; */
+
+			status = "disabled";
+		};
+
 		lsspi: spi@fff8c800 {
 			#address-cells = <1>;
 			#size-cells = <0>;

target/linux/brcm63xx/dts/bcm6318.dtsi

@@ -5,6 +5,7 @@
 
 	aliases {
 		pinctrl = &pinctrl;
+		serial0 = &uart0;
 		spi1 = &hsspi;
 	};
 
@@ -166,6 +167,19 @@
 			};
 		};
 
+		uart0: serial@10000100 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x10000100 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <28>;
+
+			/* clocks = <&periph_clk>; */
+			/* clock-names = "refclk"; */
+
+			status = "disabled";
+		};
+
 		leds: led-controller@10000200 {
 			#address-cells = <1>;
 			#size-cells = <0>;

target/linux/brcm63xx/dts/bcm63268.dtsi

@@ -5,6 +5,8 @@
 
 	aliases {
 		pinctrl = &pinctrl;
+		serial0 = &uart0;
+		serial1 = &uart1;
 		spi0 = &lsspi;
 		spi1 = &hsspi;
 	};
@@ -193,6 +195,32 @@
 			};
 		};
 
+		uart0: serial@10000180 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x10000180 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <5>;
+
+			/* clocks = <&periph_clk>; */
+			/* clock-names = "refclk"; */
+
+			status = "disabled";
+		};
+
+		uart1: serial@100001a0 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x100001a0 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <34>;
+
+			/* clocks = <&periph_clk>; */
+			/* clock-names = "refclk"; */
+
+			status = "disabled";
+		};
+
 		lsspi: spi@10000800 {
 			#address-cells = <1>;
 			#size-cells = <0>;

target/linux/brcm63xx/dts/bcm6328.dtsi

@@ -5,6 +5,8 @@
 
 	aliases {
 		pinctrl = &pinctrl;
+		serial0 = &uart0;
+		serial1 = &uart1;
 		spi1 = &hsspi;
 	};
 
@@ -151,6 +153,32 @@
 			};
 		};
 
+		uart0: serial@10000100 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x10000100 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <28>;
+
+			/* clocks = <&periph_clk>; */
+			/* clock-names = "refclk"; */
+
+			status = "disabled";
+		};
+
+		uart1: serial@10000120 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x10000120 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <39>;
+
+			/* clocks = <&periph_clk>; */
+			/* clock-names = "refclk"; */
+
+			status = "disabled";
+		};
+
 		leds: led-controller@10000800 {
 			#address-cells = <1>;
 			#size-cells = <0>;

target/linux/brcm63xx/dts/bcm6338.dtsi

@@ -6,6 +6,7 @@
 	aliases {
 		pflash = &pflash;
 		gpio0 = &gpio0;
+		serial0 = &uart0;
 		spi0 = &lsspi;
 	};
 
@@ -79,6 +80,19 @@
 			ngpios = <8>;
 		};
 
+		uart0: serial@fffe0300 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0xfffe0300 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <2>;
+
+			/* clocks = <&periph_clk>; */
+			/* clock-names = "refclk"; */
+
+			status = "disabled";
+		};
+
 		lsspi: spi@fffe0c00 {
 			#address-cells = <1>;
 			#size-cells = <0>;

target/linux/brcm63xx/dts/bcm6345.dtsi

@@ -5,6 +5,7 @@
 
 	aliases {
 		pflash = &pflash;
+		serial0 = &uart0;
 		gpio0 = &gpio0;
 	};
 
@@ -67,6 +68,19 @@
 			interrupts = <3>, <4>, <5>, <6>;
 		};
 
+		uart0: serial@fffe0300 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0xfffe0300 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <2>;
+
+			/* clocks = <&periph_clk>; */
+			/* clock-names = "refclk"; */
+
+			status = "disabled";
+		};
+
 		gpio0: gpio-controller@fffe0404 {
 			compatible = "brcm,bcm6345-gpio";
 			reg = <0xfffe0404 4>, <0xfffe0408 4>;

target/linux/brcm63xx/dts/bcm6348.dtsi

@@ -6,6 +6,7 @@
 	aliases {
 		pflash = &pflash;
 		pinctrl = &pinctrl;
+		serial0 = &uart0;
 		spi0 = &lsspi;
 	};
 
@@ -126,6 +127,19 @@
 			};
 		};
 
+		uart0: serial@fffe0300 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0xfffe0300 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <2>;
+
+			/* clocks = <&periph_clk>; */
+			/* clock-names = "refclk"; */
+
+			status = "disabled";
+		};
+
 		lsspi: spi@fffe0c00 {
 			#address-cells = <1>;
 			#size-cells = <0>;

target/linux/brcm63xx/dts/bcm6358.dtsi

@@ -6,6 +6,8 @@
 	aliases {
 		pflash = &pflash;
 		pinctrl = &pinctrl;
+		serial0 = &uart0;
+		serial1 = &uart1;
 		spi0 = &lsspi;
 	};
 
@@ -163,6 +165,32 @@
 			status = "disabled";
 		};
 
+		uart0: serial@fffe0100 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0xfffe0100 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <2>;
+
+			/* clocks = <&periph_clk>; */
+			/* clock-names = "refclk"; */
+
+			status = "disabled";
+		};
+
+		uart1: serial@fffe0120 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0xfffe0120 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <3>;
+
+			/* clocks = <&periph_clk>; */
+			/* clock-names = "refclk"; */
+
+			status = "disabled";
+		};
+
 		lsspi: spi@fffe0800 {
 			#address-cells = <1>;
 			#size-cells = <0>;

target/linux/brcm63xx/dts/bcm6362.dtsi

@@ -5,6 +5,8 @@
 
 	aliases {
 		pinctrl = &pinctrl;
+		serial0 = &uart0;
+		serial1 = &uart1;
 		spi0 = &lsspi;
 		spi1 = &hsspi;
 	};
@@ -237,6 +239,32 @@
 			};
 		};
 
+		uart0: serial@10000100 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x10000100 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <3>;
+
+			/* clocks = <&periph_clk>; */
+			/* clock-names = "refclk"; */
+
+			status = "disabled";
+		};
+
+		uart1: serial@10000120 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x10000120 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <4>;
+
+			/* clocks = <&periph_clk>; */
+			/* clock-names = "refclk"; */
+
+			status = "disabled";
+		};
+
 		lsspi: spi@10000800 {
 			#address-cells = <1>;
 			#size-cells = <0>;

target/linux/brcm63xx/dts/bcm6368.dtsi

@@ -6,6 +6,8 @@
 	aliases {
 		pflash = &pflash;
 		pinctrl = &pinctrl;
+		serial0 = &uart0;
+		serial1 = &uart1;
 		spi0 = &lsspi;
 	};
 
@@ -270,6 +272,32 @@
 			status = "disabled";
 		};
 
+		uart0: serial@10000100 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x10000100 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <2>;
+
+			/* clocks = <&periph_clk>; */
+			/* clock-names = "refclk"; */
+
+			status = "disabled";
+		};
+
+		uart1: serial@10000120 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x10000120 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <3>;
+
+			/* clocks = <&periph_clk>; */
+			/* clock-names = "refclk"; */
+
+			status = "disabled";
+		};
+
 		lsspi: spi@10000800 {
 			#address-cells = <1>;
 			#size-cells = <0>;