mac80211: update to version 5.4-rc8

This updates mac80211 to backports based on kernel 5.4-rc8.

The deleted patches were applied upstream.

Signed-off-by: Hauke Mehrtens <[email protected]>

package/kernel/mac80211/Makefile

@@ -10,10 +10,10 @@ include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=mac80211
 
-PKG_VERSION:=5.4-rc2-1
-PKG_RELEASE:=2
-PKG_SOURCE_URL:=@KERNEL/linux/kernel/projects/backports/stable/v5.4-rc2/
-PKG_HASH:=b3baedc135b455f09f266cb77e73276ca21bceeb0f24bac2184cc4b97d09cdbf
+PKG_VERSION:=5.4-rc8-1
+PKG_RELEASE:=1
+PKG_SOURCE_URL:=@KERNEL/linux/kernel/projects/backports/stable/v5.4-rc8/
+PKG_HASH:=707ffc50d0f6fe3398bcc3a7abd44ffa088d9309255a3a71d014620c20d3bbf9
 
 PKG_SOURCE:=backports-$(PKG_VERSION).tar.xz
 PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/backports-$(PKG_VERSION)

package/kernel/mac80211/patches/ath/921-ath10k_init_devices_synchronously.patch

@@ -14,7 +14,7 @@ Signed-off-by: Sven Eckelmann <[email protected]>
 
 --- a/drivers/net/wireless/ath/ath10k/core.c
 +++ b/drivers/net/wireless/ath/ath10k/core.c
-@@ -3071,6 +3071,16 @@ int ath10k_core_register(struct ath10k *
+@@ -3074,6 +3074,16 @@ int ath10k_core_register(struct ath10k *
  
  	queue_work(ar->workqueue, &ar->register_work);
  

package/kernel/mac80211/patches/ath/974-ath10k_add-LED-and-GPIO-controlling-support-for-various-chipsets.patch

@@ -172,7 +172,7 @@ v13:
  		.patch_load_addr = QCA9888_HW_2_0_PATCH_LOAD_ADDR,
  		.uart_pin = 7,
  		.cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH,
-@@ -2788,6 +2794,10 @@ int ath10k_core_start(struct ath10k *ar,
+@@ -2791,6 +2797,10 @@ int ath10k_core_start(struct ath10k *ar,
  		goto err_hif_stop;
  	}
  
@@ -183,7 +183,7 @@ v13:
  	return 0;
  
  err_hif_stop:
-@@ -3044,9 +3054,18 @@ static void ath10k_core_register_work(st
+@@ -3047,9 +3057,18 @@ static void ath10k_core_register_work(st
  		goto err_spectral_destroy;
  	}
  
@@ -202,7 +202,7 @@ v13:
  err_spectral_destroy:
  	ath10k_spectral_destroy(ar);
  err_debug_destroy:
-@@ -3092,6 +3111,8 @@ void ath10k_core_unregister(struct ath10
+@@ -3095,6 +3114,8 @@ void ath10k_core_unregister(struct ath10
  	if (!test_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags))
  		return;
  

package/kernel/mac80211/patches/ath/982-ath10k-fix-latency-issue-for-QCA988x.patch

@@ -1,42 +0,0 @@
-From: Miaoqing Pan <[email protected]>
-Subject: [PATCH] ath10k: fix latency issue for QCA988x
-Date: Thu, 29 Aug 2019 10:45:12 +0800
-
-Bad latency is found on QCA988x, the issue was introduced by
-commit 4504f0e5b571 ("ath10k: sdio: workaround firmware UART
-pin configuration bug"). If uart_pin_workaround is false, this
-change will set uart pin even if uart_print is false.
-
-Tested HW: QCA9880
-Tested FW: 10.2.4-1.0-00037
-
-Fixes: 4504f0e5b571 ("ath10k: sdio: workaround firmware UART pin configuration bug")
-Signed-off-by: Miaoqing Pan <[email protected]>
----
- drivers/net/wireless/ath/ath10k/core.c | 15 +++++++++------
- 1 file changed, 9 insertions(+), 6 deletions(-)
-
---- a/drivers/net/wireless/ath/ath10k/core.c
-+++ b/drivers/net/wireless/ath/ath10k/core.c
-@@ -2124,12 +2124,15 @@ static int ath10k_init_uart(struct ath10
- 		return ret;
- 	}
- 
--	if (!uart_print && ar->hw_params.uart_pin_workaround) {
--		ret = ath10k_bmi_write32(ar, hi_dbg_uart_txpin,
--					 ar->hw_params.uart_pin);
--		if (ret) {
--			ath10k_warn(ar, "failed to set UART TX pin: %d", ret);
--			return ret;
-+	if (!uart_print) {
-+		if (ar->hw_params.uart_pin_workaround) {
-+			ret = ath10k_bmi_write32(ar, hi_dbg_uart_txpin,
-+						 ar->hw_params.uart_pin);
-+			if (ret) {
-+				ath10k_warn(ar, "failed to set UART TX pin: %d",
-+					    ret);
-+				return ret;
-+			}
- 		}
- 
- 		return 0;

package/kernel/mac80211/patches/build/100-backports-pci-Include-linux-pci-aspm.h.patch

@@ -1,24 +0,0 @@
-From: Hauke Mehrtens <[email protected]>
-Date: Fri, 27 Sep 2019 23:12:08 +0200
-Subject: [PATCH] backports: pci: Include linux/pci-aspm.h
-
-In upstream commit 7ce2e76a0420 linux/pci-aspm.h was removed and the
-content included into pci.h. Add an include to have the functions
-defined in linux/pci-aspm.h available when linux/pci.h is included.
-
-Signed-off-by: Hauke Mehrtens <[email protected]>
----
-
---- a/backport-include/linux/pci.h
-+++ b/backport-include/linux/pci.h
-@@ -7,6 +7,10 @@
- #include <linux/pci-aspm.h>
- #endif
- 
-+#if LINUX_VERSION_IS_LESS(5,4,0)
-+#include <linux/pci-aspm.h>
-+#endif
-+
- #ifndef module_pci_driver
- /**
-  * module_pci_driver() - Helper macro for registering a PCI driver

package/kernel/mac80211/patches/build/101-backport-add-pci_disable_link_state-wrapper-with-ret.patch

@@ -1,43 +0,0 @@
-From: Felix Fietkau <[email protected]>
-Date: Mon, 28 Oct 2019 15:20:40 +0100
-Subject: [PATCH] backport: add pci_disable_link_state wrapper with return code
-
-The signature of pci_disable_link_state was changed to indicate if the state
-was successfully disabled. Since the old version did not have this, add a
-wrapper which checks the pcie register to determine the return code
-
-Signed-off-by: Felix Fietkau <[email protected]>
----
-
---- a/backport-include/linux/pci.h
-+++ b/backport-include/linux/pci.h
-@@ -240,4 +240,29 @@ static inline struct pci_dev *pcie_find_
- 	(PCI_IRQ_LEGACY | PCI_IRQ_MSI | PCI_IRQ_MSIX)
- #endif
- 
-+#if defined(CONFIG_PCI) && LINUX_VERSION_IS_LESS(5,3,0)
-+
-+static inline int
-+LINUX_BACKPORT(pci_disable_link_state)(struct pci_dev *pdev, int state)
-+{
-+	u16 aspmc;
-+
-+	pci_disable_link_state(pdev, state);
-+
-+	pcie_capability_read_word(pdev, PCI_EXP_LNKCTL, &aspmc);
-+	if ((state & PCIE_LINK_STATE_L0S) &&
-+	    (aspmc & PCI_EXP_LNKCTL_ASPM_L0S))
-+		return -EPERM;
-+
-+	if ((state & PCIE_LINK_STATE_L1) &&
-+	    (aspmc & PCI_EXP_LNKCTL_ASPM_L1))
-+		return -EPERM;
-+
-+	return 0;
-+}
-+
-+#define pci_disable_link_state LINUX_BACKPORT(pci_disable_link_state)
-+
-+#endif
-+
- #endif /* _BACKPORT_LINUX_PCI_H */

package/kernel/mac80211/patches/build/102-backports-Adapt-to-changes-to-skb_get_hash_perturb.patch

@@ -1,68 +0,0 @@
-From e3c57dd949835419cee8d3b45db38de58bf6ebd5 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <[email protected]>
-Date: Mon, 18 Nov 2019 01:13:37 +0100
-Subject: [PATCH] backports: Adapt to changes to skb_get_hash_perturb()
-
-The skb_get_hash_perturb() function now takes a siphash_key_t instead of
-an u32. This was changed in commit 55667441c84f ("net/flow_dissector:
-switch to siphash"). Use the correct type in the fq header file
-depending on the kernel version.
-
-Signed-off-by: Hauke Mehrtens <[email protected]>
----
- include/net/fq.h      | 8 ++++++++
- include/net/fq_impl.h | 8 ++++++++
- 2 files changed, 16 insertions(+)
-
---- a/include/net/fq.h
-+++ b/include/net/fq.h
-@@ -69,7 +69,15 @@ struct fq {
- 	struct list_head backlogs;
- 	spinlock_t lock;
- 	u32 flows_cnt;
-+#if LINUX_VERSION_IS_GEQ(5,3,10) || \
-+    LINUX_VERSION_IN_RANGE(4,19,83, 4,20,0) || \
-+    LINUX_VERSION_IN_RANGE(4,14,153, 4,15,0) || \
-+    LINUX_VERSION_IN_RANGE(4,9,200, 4,10,0) || \
-+    LINUX_VERSION_IN_RANGE(4,4,200, 4,5,0)
-+	siphash_key_t	perturbation;
-+#else
- 	u32 perturbation;
-+#endif
- 	u32 limit;
- 	u32 memory_limit;
- 	u32 memory_usage;
---- a/include/net/fq_impl.h
-+++ b/include/net/fq_impl.h
-@@ -108,7 +108,15 @@ begin:
- 
- static u32 fq_flow_idx(struct fq *fq, struct sk_buff *skb)
- {
-+#if LINUX_VERSION_IS_GEQ(5,3,10) || \
-+    LINUX_VERSION_IN_RANGE(4,19,83, 4,20,0) || \
-+    LINUX_VERSION_IN_RANGE(4,14,153, 4,15,0) || \
-+    LINUX_VERSION_IN_RANGE(4,9,200, 4,10,0) || \
-+    LINUX_VERSION_IN_RANGE(4,4,200, 4,5,0)
-+	u32 hash = skb_get_hash_perturb(skb, &fq->perturbation);
-+#else
- 	u32 hash = skb_get_hash_perturb(skb, fq->perturbation);
-+#endif
- 
- 	return reciprocal_scale(hash, fq->flows_cnt);
- }
-@@ -308,7 +316,15 @@ static int fq_init(struct fq *fq, int fl
- 	INIT_LIST_HEAD(&fq->backlogs);
- 	spin_lock_init(&fq->lock);
- 	fq->flows_cnt = max_t(u32, flows_cnt, 1);
-+#if LINUX_VERSION_IS_GEQ(5,3,10) || \
-+    LINUX_VERSION_IN_RANGE(4,19,83, 4,20,0) || \
-+    LINUX_VERSION_IN_RANGE(4,14,153, 4,15,0) || \
-+    LINUX_VERSION_IN_RANGE(4,9,200, 4,10,0) || \
-+    LINUX_VERSION_IN_RANGE(4,4,200, 4,5,0)
-+	get_random_bytes(&fq->perturbation, sizeof(fq->perturbation));
-+#else
- 	fq->perturbation = prandom_u32();
-+#endif
- 	fq->quantum = 300;
- 	fq->limit = 8192;
- 	fq->memory_limit = 16 << 20; /* 16 MBytes */

package/kernel/mac80211/patches/rt2x00/017-rt2x00-initialize-last_reset.patch

@@ -1,35 +0,0 @@
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-X-Patchwork-Submitter: Stanislaw Gruszka <[email protected]>
-X-Patchwork-Id: 11161981
-From: Stanislaw Gruszka <[email protected]>
-To: [email protected]
-Subject: [PATCH] rt2x00: initialize last_reset
-Date: Thu, 26 Sep 2019 10:54:33 +0200
-Message-Id: <[email protected]>
-Sender: [email protected]
-List-ID: <linux-wireless.vger.kernel.org>
-X-Mailing-List: [email protected]
-
-Initialize last_reset variable to INITIAL_JIFFIES, otherwise it is not
-possible to test H/W reset for first 5 minutes of system run.
-
-Fixes: e403fa31ed71 ("rt2x00: add restart hw")
-Reported-and-tested-by: Jonathan Liu <[email protected]>
-Signed-off-by: Stanislaw Gruszka <[email protected]>
----
- drivers/net/wireless/ralink/rt2x00/rt2x00debug.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00debug.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00debug.c
-@@ -555,7 +555,7 @@ static ssize_t rt2x00debug_write_restart
- {
- 	struct rt2x00debug_intf *intf =	file->private_data;
- 	struct rt2x00_dev *rt2x00dev = intf->rt2x00dev;
--	static unsigned long last_reset;
-+	static unsigned long last_reset = INITIAL_JIFFIES;
- 
- 	if (!rt2x00_has_cap_restart_hw(rt2x00dev))
- 		return -EOPNOTSUPP;

package/kernel/mac80211/patches/rt2x00/601-rt2x00-introduce-rt2x00_platform_h.patch

@@ -22,7 +22,7 @@
 +#endif /* _RT2X00_PLATFORM_H */
 --- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
 +++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
-@@ -29,6 +29,7 @@
+@@ -28,6 +28,7 @@
  #include <linux/average.h>
  #include <linux/usb.h>
  #include <linux/clk.h>

package/kernel/mac80211/patches/rt2x00/602-rt2x00-introduce-rt2x00eeprom.patch

@@ -105,7 +105,7 @@
  	.drv_init_registers	= rt2800mmio_init_registers,
 --- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
 +++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
-@@ -695,6 +695,7 @@ enum rt2x00_capability_flags {
+@@ -694,6 +694,7 @@ enum rt2x00_capability_flags {
  	REQUIRE_HT_TX_DESC,
  	REQUIRE_PS_AUTOWAKE,
  	REQUIRE_DELAYED_RFKILL,
@@ -113,7 +113,7 @@
  
  	/*
  	 * Capabilities
-@@ -971,6 +972,11 @@ struct rt2x00_dev {
+@@ -970,6 +971,11 @@ struct rt2x00_dev {
  	const struct firmware *fw;
  
  	/*

package/kernel/mac80211/patches/rt2x00/606-rt2x00-allow_disabling_bands_through_platform_data.patch

@@ -37,7 +37,7 @@
  		num_rates += 4;
 --- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
 +++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
-@@ -400,6 +400,7 @@ struct hw_mode_spec {
+@@ -399,6 +399,7 @@ struct hw_mode_spec {
  	unsigned int supported_bands;
  #define SUPPORT_BAND_2GHZ	0x00000001
  #define SUPPORT_BAND_5GHZ	0x00000002

package/kernel/mac80211/patches/rt2x00/982-rt2x00-add-rf-self-txdc-calibration.patch

@@ -79,7 +79,7 @@
  void rt2800_disable_radio(struct rt2x00_dev *rt2x00dev);
 --- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
 +++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
-@@ -563,6 +563,7 @@ struct rt2x00lib_ops {
+@@ -562,6 +562,7 @@ struct rt2x00lib_ops {
  			    struct link_qual *qual, const u32 count);
  	void (*gain_calibration) (struct rt2x00_dev *rt2x00dev);
  	void (*vco_calibration) (struct rt2x00_dev *rt2x00dev);

package/kernel/mac80211/patches/rt2x00/983-rt2x00-add-r-calibration.patch

@@ -182,7 +182,7 @@
  void rt2800_disable_radio(struct rt2x00_dev *rt2x00dev);
 --- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
 +++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
-@@ -564,6 +564,8 @@ struct rt2x00lib_ops {
+@@ -563,6 +563,8 @@ struct rt2x00lib_ops {
  	void (*gain_calibration) (struct rt2x00_dev *rt2x00dev);
  	void (*vco_calibration) (struct rt2x00_dev *rt2x00dev);
  	void (*rf_self_txdc_cal) (struct rt2x00_dev *rt2x00dev);

package/kernel/mac80211/patches/rt2x00/984-rt2x00-add-rxdcoc-calibration.patch

@@ -92,7 +92,7 @@
  void rt2800_disable_radio(struct rt2x00_dev *rt2x00dev);
 --- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
 +++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
-@@ -566,6 +566,7 @@ struct rt2x00lib_ops {
+@@ -565,6 +565,7 @@ struct rt2x00lib_ops {
  	void (*rf_self_txdc_cal) (struct rt2x00_dev *rt2x00dev);
  	int (*calcrcalibrationcode) (struct rt2x00_dev *rt2x00dev, int d1, int d2);
  	void (*r_calibration) (struct rt2x00_dev *rt2x00dev);

package/kernel/mac80211/patches/rt2x00/985-rt2x00-add-rxiq-calibration.patch

@@ -407,7 +407,7 @@
  void rt2800_disable_radio(struct rt2x00_dev *rt2x00dev);
 --- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
 +++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
-@@ -567,6 +567,7 @@ struct rt2x00lib_ops {
+@@ -566,6 +566,7 @@ struct rt2x00lib_ops {
  	int (*calcrcalibrationcode) (struct rt2x00_dev *rt2x00dev, int d1, int d2);
  	void (*r_calibration) (struct rt2x00_dev *rt2x00dev);
  	void (*rxdcoc_calibration) (struct rt2x00_dev *rt2x00dev);

package/kernel/mac80211/patches/rt2x00/986-rt2x00-add-TX-LOFT-calibration.patch

@@ -992,7 +992,7 @@
  void rt2800_disable_radio(struct rt2x00_dev *rt2x00dev);
 --- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
 +++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
-@@ -568,6 +568,7 @@ struct rt2x00lib_ops {
+@@ -567,6 +567,7 @@ struct rt2x00lib_ops {
  	void (*r_calibration) (struct rt2x00_dev *rt2x00dev);
  	void (*rxdcoc_calibration) (struct rt2x00_dev *rt2x00dev);
  	void (*rxiq_calibration) (struct rt2x00_dev *rt2x00dev);

package/kernel/mac80211/patches/subsys/030-mac80211_fix-scan-when-operating-on-DFS-channels-in-ETSI-domains.patch

@@ -1,118 +0,0 @@
-From dc0c18ed229cdcca283dd78fefa38273ec37a42c Mon Sep 17 00:00:00 2001
-From: Aaron Komisar <[email protected]>
-Date: Wed, 2 Oct 2019 13:59:07 +0000
-Subject: mac80211: fix scan when operating on DFS channels in ETSI domains
-
-In non-ETSI regulatory domains scan is blocked when operating channel
-is a DFS channel. For ETSI, however, once DFS channel is marked as
-available after the CAC, this channel will remain available (for some
-time) even after leaving this channel.
-
-Therefore a scan can be done without any impact on the availability
-of the DFS channel as no new CAC is required after the scan.
-
-Enable scan in mac80211 in these cases.
-
-Signed-off-by: Aaron Komisar <[email protected]>
-Link: https://lore.kernel.org/r/[email protected]
-Signed-off-by: Johannes Berg <[email protected]>
----
- include/net/cfg80211.h |  8 ++++++++
- net/mac80211/scan.c    | 30 ++++++++++++++++++++++++++++--
- net/wireless/reg.c     |  1 +
- net/wireless/reg.h     |  8 --------
- 4 files changed, 37 insertions(+), 10 deletions(-)
-
---- a/include/net/cfg80211.h
-+++ b/include/net/cfg80211.h
-@@ -5554,6 +5554,14 @@ const struct ieee80211_reg_rule *freq_re
- const char *reg_initiator_name(enum nl80211_reg_initiator initiator);
- 
- /**
-+ * regulatory_pre_cac_allowed - check if pre-CAC allowed in the current regdom
-+ * @wiphy: wiphy for which pre-CAC capability is checked.
-+ *
-+ * Pre-CAC is allowed only in some regdomains (notable ETSI).
-+ */
-+bool regulatory_pre_cac_allowed(struct wiphy *wiphy);
-+
-+/**
-  * DOC: Internal regulatory db functions
-  *
-  */
---- a/net/mac80211/scan.c
-+++ b/net/mac80211/scan.c
-@@ -520,10 +520,33 @@ static int ieee80211_start_sw_scan(struc
- 	return 0;
- }
- 
-+static bool __ieee80211_can_leave_ch(struct ieee80211_sub_if_data *sdata)
-+{
-+	struct ieee80211_local *local = sdata->local;
-+	struct ieee80211_sub_if_data *sdata_iter;
-+
-+	if (!ieee80211_is_radar_required(local))
-+		return true;
-+
-+	if (!regulatory_pre_cac_allowed(local->hw.wiphy))
-+		return false;
-+
-+	mutex_lock(&local->iflist_mtx);
-+	list_for_each_entry(sdata_iter, &local->interfaces, list) {
-+		if (sdata_iter->wdev.cac_started) {
-+			mutex_unlock(&local->iflist_mtx);
-+			return false;
-+		}
-+	}
-+	mutex_unlock(&local->iflist_mtx);
-+
-+	return true;
-+}
-+
- static bool ieee80211_can_scan(struct ieee80211_local *local,
- 			       struct ieee80211_sub_if_data *sdata)
- {
--	if (ieee80211_is_radar_required(local))
-+	if (!__ieee80211_can_leave_ch(sdata))
- 		return false;
- 
- 	if (!list_empty(&local->roc_list))
-@@ -630,7 +653,10 @@ static int __ieee80211_start_scan(struct
- 
- 	lockdep_assert_held(&local->mtx);
- 
--	if (local->scan_req || ieee80211_is_radar_required(local))
-+	if (local->scan_req)
-+		return -EBUSY;
-+
-+	if (!__ieee80211_can_leave_ch(sdata))
- 		return -EBUSY;
- 
- 	if (!ieee80211_can_scan(local, sdata)) {
---- a/net/wireless/reg.c
-+++ b/net/wireless/reg.c
-@@ -3883,6 +3883,7 @@ bool regulatory_pre_cac_allowed(struct w
- 
- 	return pre_cac_allowed;
- }
-+EXPORT_SYMBOL(regulatory_pre_cac_allowed);
- 
- void regulatory_propagate_dfs_state(struct wiphy *wiphy,
- 				    struct cfg80211_chan_def *chandef,
---- a/net/wireless/reg.h
-+++ b/net/wireless/reg.h
-@@ -156,14 +156,6 @@ bool regulatory_indoor_allowed(void);
- #define REG_PRE_CAC_EXPIRY_GRACE_MS 2000
- 
- /**
-- * regulatory_pre_cac_allowed - if pre-CAC allowed in the current dfs domain
-- * @wiphy: wiphy for which pre-CAC capability is checked.
--
-- * Pre-CAC is allowed only in ETSI domain.
-- */
--bool regulatory_pre_cac_allowed(struct wiphy *wiphy);
--
--/**
-  * regulatory_propagate_dfs_state - Propagate DFS channel state to other wiphys
-  * @wiphy - wiphy on which radar is detected and the event will be propagated
-  *	to other available wiphys having the same DFS domain

package/kernel/mac80211/patches/subsys/363-mac80211-accept-deauth-frames-in-IBSS-mode.patch

@@ -1,39 +0,0 @@
-From 95697f9907bfe3eab0ef20265a766b22e27dde64 Mon Sep 17 00:00:00 2001
-From: Johannes Berg <[email protected]>
-Date: Fri, 4 Oct 2019 15:37:05 +0300
-Subject: [PATCH] mac80211: accept deauth frames in IBSS mode
-
-We can process deauth frames and all, but we drop them very
-early in the RX path today - this could never have worked.
-
-Fixes: 2cc59e784b54 ("mac80211: reply to AUTH with DEAUTH if sta allocation fails in IBSS")
-Signed-off-by: Johannes Berg <[email protected]>
-Signed-off-by: Luca Coelho <[email protected]>
-Link: https://lore.kernel.org/r/[email protected]
-Signed-off-by: Johannes Berg <[email protected]>
----
- net/mac80211/rx.c | 11 ++++++++++-
- 1 file changed, 10 insertions(+), 1 deletion(-)
-
---- a/net/mac80211/rx.c
-+++ b/net/mac80211/rx.c
-@@ -3467,9 +3467,18 @@ ieee80211_rx_h_mgmt(struct ieee80211_rx_
- 	case cpu_to_le16(IEEE80211_STYPE_PROBE_RESP):
- 		/* process for all: mesh, mlme, ibss */
- 		break;
-+	case cpu_to_le16(IEEE80211_STYPE_DEAUTH):
-+		if (is_multicast_ether_addr(mgmt->da) &&
-+		    !is_broadcast_ether_addr(mgmt->da))
-+			return RX_DROP_MONITOR;
-+
-+		/* process only for station/IBSS */
-+		if (sdata->vif.type != NL80211_IFTYPE_STATION &&
-+		    sdata->vif.type != NL80211_IFTYPE_ADHOC)
-+			return RX_DROP_MONITOR;
-+		break;
- 	case cpu_to_le16(IEEE80211_STYPE_ASSOC_RESP):
- 	case cpu_to_le16(IEEE80211_STYPE_REASSOC_RESP):
--	case cpu_to_le16(IEEE80211_STYPE_DEAUTH):
- 	case cpu_to_le16(IEEE80211_STYPE_DISASSOC):
- 		if (is_multicast_ether_addr(mgmt->da) &&
- 		    !is_broadcast_ether_addr(mgmt->da))