ipq806x: drop "mtd: nand: add Winbond manufacturer and chip"

The W25N01GV NAND is currently not used in any ipq806x device.

Signed-off-by: Stefan Lippers-Hollmann <[email protected]>

target/linux/ipq806x/patches-4.14/104-mtd-nand-add-Winbond-manufacturer-and-chip.patch

@@ -1,38 +0,0 @@
-From 07b6d0cdbbda8c917480eceaec668f09e4cf24a5 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <[email protected]>
-Date: Mon, 14 Nov 2016 23:49:22 +0100
-Subject: [PATCH] mtd: nand: add Winbond manufacturer and chip
-
-This patch adds the W25N01GV NAND to the table of
-known devices. Without this patch the device gets detected:
-
-nand: device found, Manufacturer ID: 0xef, Chip ID: 0xaa
-nand: Unknown NAND 256MiB 1,8V 8-bit
-nand: 256 MiB, SLC, erase size: 64 KiB, page size: 1024, OOB size : 16
-
-Whereas the u-boot identifies it as:
-spi_nand: spi_nand_flash_probe SF NAND ID 00:ef:aa:21
-SF: Detected W25N01GV with page size 2 KiB, total 128 MiB
-
-Due to the page size discrepancy, it's impossible to attach
-ubi volumes on the device.
-
-Signed-off-by: Christian Lamparter <[email protected]>
----
- drivers/mtd/nand/nand_ids.c | 4 ++++
- include/linux/mtd/nand.h    | 1 +
- 2 files changed, 5 insertions(+)
-
---- a/drivers/mtd/nand/nand_ids.c
-+++ b/drivers/mtd/nand/nand_ids.c
-@@ -54,6 +54,10 @@ struct nand_flash_dev nand_flash_ids[] =
-		{ .id = {0xad, 0xde, 0x94, 0xda, 0x74, 0xc4} },
-		  SZ_8K, SZ_8K, SZ_2M, NAND_NEED_SCRAMBLING, 6, 640,
-		  NAND_ECC_INFO(40, SZ_1K), 4 },
-+	{"W25N01GV 1G 3.3V 8-bit",
-+		{ .id = {0xef, 0xaa} },
-+		  SZ_2K, SZ_128, SZ_128K, NAND_NO_SUBPAGE_WRITE,
-+		  2, 64, NAND_ECC_INFO(1, SZ_512) },
-
-	LEGACY_ID_NAND("NAND 4MiB 5V 8-bit",   0x6B, 4, SZ_8K, SP_OPTIONS),
-	LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE3, 4, SZ_8K, SP_OPTIONS),