ipq40xx: enable ethernet and DSA driver combo

Select the Ethernet driver, DSA tag driver and the DSA driver itself to
be built in the kernel config.
They automatically pull in switchdev and phylink.

Signed-off-by: Robert Marko <[email protected]>

target/linux/ipq40xx/config-5.10

@@ -180,6 +180,7 @@ CONFIG_GPIOLIB_IRQCHIP=y
 CONFIG_GPIO_74X164=y
 CONFIG_GPIO_WATCHDOG=y
 CONFIG_GPIO_WATCHDOG_ARCH_INITCALL=y
+CONFIG_GRO_CELLS=y
 CONFIG_HANDLE_DOMAIN_IRQ=y
 CONFIG_HARDEN_BRANCH_PREDICTOR=y
 CONFIG_HARDIRQS_SW_RESEND=y
@@ -287,8 +288,13 @@ CONFIG_MTD_UBI_WL_THRESHOLD=4096
 CONFIG_MUTEX_SPIN_ON_OWNER=y
 CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_NEON=y
+CONFIG_NET_DEVLINK=y
+CONFIG_NET_DSA=y
+CONFIG_NET_DSA_QCA8K_IPQ4019=y
+CONFIG_NET_DSA_TAG_IPQ4019=y
 CONFIG_NET_FLOW_LIMIT=y
 CONFIG_NET_PTP_CLASSIFY=y
+CONFIG_NET_SWITCHDEV=y
 CONFIG_NLS=y
 CONFIG_NO_HZ=y
 CONFIG_NO_HZ_COMMON=y
@@ -326,6 +332,7 @@ CONFIG_PCI_MSI_IRQ_DOMAIN=y
 CONFIG_PERF_USE_VMALLOC=y
 CONFIG_PGTABLE_LEVELS=2
 CONFIG_PHYLIB=y
+CONFIG_PHYLINK=y
 # CONFIG_PHY_QCOM_APQ8064_SATA is not set
 CONFIG_PHY_QCOM_IPQ4019_USB=y
 # CONFIG_PHY_QCOM_IPQ806X_SATA is not set
@@ -379,6 +386,7 @@ CONFIG_QCOM_BAM_DMA=y
 # CONFIG_QCOM_GSBI is not set
 # CONFIG_QCOM_HFPLL is not set
 # CONFIG_QCOM_IOMMU is not set
+CONFIG_QCOM_IPQ4019_ESS_EDMA=y
 # CONFIG_QCOM_LLCC is not set
 # CONFIG_QCOM_OCMEM is not set
 # CONFIG_QCOM_PDC is not set

target/linux/ipq40xx/config-5.15

@@ -185,6 +185,7 @@ CONFIG_GPIO_74X164=y
 CONFIG_GPIO_CDEV=y
 CONFIG_GPIO_WATCHDOG=y
 CONFIG_GPIO_WATCHDOG_ARCH_INITCALL=y
+CONFIG_GRO_CELLS=y
 CONFIG_HANDLE_DOMAIN_IRQ=y
 CONFIG_HARDEN_BRANCH_PREDICTOR=y
 CONFIG_HARDIRQS_SW_RESEND=y
@@ -294,9 +295,14 @@ CONFIG_MTD_UBI_WL_THRESHOLD=4096
 CONFIG_MUTEX_SPIN_ON_OWNER=y
 CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_NEON=y
+CONFIG_NET_DEVLINK=y
+CONFIG_NET_DSA=y
+CONFIG_NET_DSA_QCA8K_IPQ4019=y
+CONFIG_NET_DSA_TAG_IPQ4019=y
 CONFIG_NET_FLOW_LIMIT=y
 CONFIG_NET_PTP_CLASSIFY=y
 CONFIG_NET_SELFTESTS=y
+CONFIG_NET_SWITCHDEV=y
 CONFIG_NLS=y
 CONFIG_NO_HZ=y
 CONFIG_NO_HZ_COMMON=y
@@ -333,6 +339,7 @@ CONFIG_PCI_MSI_IRQ_DOMAIN=y
 CONFIG_PERF_USE_VMALLOC=y
 CONFIG_PGTABLE_LEVELS=2
 CONFIG_PHYLIB=y
+CONFIG_PHYLINK=y
 # CONFIG_PHY_QCOM_APQ8064_SATA is not set
 CONFIG_PHY_QCOM_IPQ4019_USB=y
 # CONFIG_PHY_QCOM_IPQ806X_SATA is not set
@@ -387,6 +394,7 @@ CONFIG_QCOM_BAM_DMA=y
 # CONFIG_QCOM_GSBI is not set
 # CONFIG_QCOM_HFPLL is not set
 # CONFIG_QCOM_IOMMU is not set
+CONFIG_QCOM_IPQ4019_ESS_EDMA=y
 # CONFIG_QCOM_LLCC is not set
 # CONFIG_QCOM_OCMEM is not set
 # CONFIG_QCOM_PDC is not set