|
|
@@ -0,0 +1,166 @@
|
|
|
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
+
|
|
|
+#include "qca956x.dtsi"
|
|
|
+
|
|
|
+#include <dt-bindings/gpio/gpio.h>
|
|
|
+#include <dt-bindings/input/input.h>
|
|
|
+
|
|
|
+/ {
|
|
|
+ model = "NEC Aterm WF1200CR";
|
|
|
+ compatible = "nec,wf1200cr", "qca,qca9561";
|
|
|
+
|
|
|
+ aliases {
|
|
|
+ led-boot = &led_power_green;
|
|
|
+ led-failsafe = &led_power_red;
|
|
|
+ led-running = &led_power_green;
|
|
|
+ led-upgrade = &led_power_green;
|
|
|
+ };
|
|
|
+
|
|
|
+ leds {
|
|
|
+ compatible = "gpio-leds";
|
|
|
+ /* other LEDs are connected to ath10k (QCA9888) gpiochip */
|
|
|
+
|
|
|
+ led_power_green: power_green {
|
|
|
+ label = "green:power";
|
|
|
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
|
|
|
+ };
|
|
|
+
|
|
|
+ led_power_red: power_red {
|
|
|
+ label = "red:power";
|
|
|
+ gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ keys {
|
|
|
+ compatible = "gpio-keys";
|
|
|
+
|
|
|
+ reset {
|
|
|
+ label = "reset";
|
|
|
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
|
|
|
+ linux,code = <KEY_RESTART>;
|
|
|
+ debounce-interval = <60>;
|
|
|
+ };
|
|
|
+
|
|
|
+ router {
|
|
|
+ label = "rt";
|
|
|
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
|
|
|
+ linux,code = <BTN_0>;
|
|
|
+ linux,input-type = <EV_SW>;
|
|
|
+ debounce-interval = <60>;
|
|
|
+ };
|
|
|
+
|
|
|
+ wps {
|
|
|
+ label = "wps";
|
|
|
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
|
|
|
+ linux,code = <KEY_WPS_BUTTON>;
|
|
|
+ debounce-interval = <60>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&spi {
|
|
|
+ status = "okay";
|
|
|
+
|
|
|
+ flash@0 {
|
|
|
+ compatible = "jedec,spi-nor";
|
|
|
+ reg = <0>;
|
|
|
+ spi-max-frequency = <25000000>;
|
|
|
+
|
|
|
+ partitions {
|
|
|
+ compatible = "fixed-partitions";
|
|
|
+ #address-cells = <1>;
|
|
|
+ #size-cells = <1>;
|
|
|
+
|
|
|
+ partition@0 {
|
|
|
+ label = "u-boot";
|
|
|
+ reg = <0x000000 0x040000>;
|
|
|
+ read-only;
|
|
|
+ };
|
|
|
+
|
|
|
+ partition@40000 {
|
|
|
+ label = "devdata";
|
|
|
+ reg = <0x040000 0x010000>;
|
|
|
+ read-only;
|
|
|
+ };
|
|
|
+
|
|
|
+ partition@50000 {
|
|
|
+ label = "devconf";
|
|
|
+ reg = <0x050000 0x010000>;
|
|
|
+ read-only;
|
|
|
+ };
|
|
|
+
|
|
|
+ partition@60000 {
|
|
|
+ label = "misc";
|
|
|
+ reg = <0x060000 0x010000>;
|
|
|
+ read-only;
|
|
|
+ };
|
|
|
+
|
|
|
+ partition@70000 {
|
|
|
+ compatible = "seama";
|
|
|
+ label = "firmware";
|
|
|
+ reg = <0x070000 0x780000>;
|
|
|
+ };
|
|
|
+
|
|
|
+ partition@7f0000 {
|
|
|
+ label = "art";
|
|
|
+ reg = <0x7f0000 0x010000>;
|
|
|
+ read-only;
|
|
|
+ };
|
|
|
+ };
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+ð0 {
|
|
|
+ status = "okay";
|
|
|
+
|
|
|
+ pll-data = <0x03000101 0x00000101 0x00001919>;
|
|
|
+
|
|
|
+ phy-handle = <&swphy0>;
|
|
|
+
|
|
|
+ gmac-config {
|
|
|
+ device = <&gmac>;
|
|
|
+
|
|
|
+ switch-phy-swap = <1>;
|
|
|
+ switch-phy-addr-swap = <0>;
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+ð1 {
|
|
|
+ status = "okay";
|
|
|
+
|
|
|
+ pinctrl-names = "default";
|
|
|
+ pinctrl-0 = <&pinmux_swled_enable_pins>;
|
|
|
+};
|
|
|
+
|
|
|
+&gpio {
|
|
|
+ switch_leds {
|
|
|
+ gpio-hog;
|
|
|
+ gpios = <14 GPIO_ACTIVE_HIGH>, /* WAN */
|
|
|
+ <19 GPIO_ACTIVE_HIGH>; /* LAN */
|
|
|
+ output-high;
|
|
|
+ line-name = "led:wan-lan";
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&pinmux {
|
|
|
+ pinmux_swled_enable_pins: swled_enable_pins {
|
|
|
+ pinctrl-single,bits =
|
|
|
+ <0xc 0x240000 0xff0000>, /* WAN */
|
|
|
+ <0x10 0x10000000 0xff000000>; /* LAN */
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&pcie {
|
|
|
+ status = "okay";
|
|
|
+
|
|
|
+ wifi@0,0 {
|
|
|
+ compatible = "qcom,ath10k";
|
|
|
+ reg = <0x0000 0 0 0 0>;
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&wmac {
|
|
|
+ status = "okay";
|
|
|
+
|
|
|
+ qca,no-eeprom;
|
|
|
+};
|
INAGAKI Hiroshi