bcm53xx: backport DT changes queued for v6.7

Among other changes this commit makes Linux use correct switch ports
again.

Fixes: a4792d79e899 ("bcm53xx: backport DT changes from v6.5")
Signed-off-by: Rafał Miłecki <[email protected]>

target/linux/bcm53xx/patches-5.15/038-v6.7-0001-ARM-dts-BCM5301X-Set-MACs-for-D-Link-DIR-885L.patch

@@ -0,0 +1,56 @@
+From 5cbee5828219c4f7b33e96b5d8ce5e467b2857c8 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
+Date: Fri, 1 Sep 2023 12:55:49 +0200
+Subject: [PATCH] ARM: dts: BCM5301X: Set MACs for D-Link DIR-885L
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Specify NVRAM access and use its "et2macaddr" NVMEM cell.
+
+Signed-off-by: Rafał Miłecki <[email protected]>
+Link: https://lore.kernel.org/r/[email protected]
+Signed-off-by: Florian Fainelli <[email protected]>
+---
+ .../dts/broadcom/bcm47094-dlink-dir-885l.dts     | 16 ++++++++++++++++
+ 1 file changed, 16 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
++++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+@@ -25,6 +25,15 @@
+ 		      <0x88000000 0x08000000>;
+ 	};
+ 
++	nvram@1e3f0000 {
++		compatible = "brcm,nvram";
++		reg = <0x1e3f0000 0x10000>;
++
++		et2macaddr: et2macaddr {
++			#nvmem-cell-cells = <1>;
++		};
++	};
++
+ 	nand_controller: nand-controller@18028000 {
+ 		nand@0 {
+ 			partitions {
+@@ -112,6 +121,11 @@
+ 	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+ };
+ 
++&gmac0 {
++	nvmem-cells = <&et2macaddr 0>;
++	nvmem-cell-names = "mac-address";
++};
++
+ &spi_nor {
+ 	status = "okay";
+ };
+@@ -142,6 +156,8 @@
+ 
+ 		port@4 {
+ 			label = "wan";
++			nvmem-cells = <&et2macaddr 3>;
++			nvmem-cell-names = "mac-address";
+ 		};
+ 
+ 		port@8 {

target/linux/bcm53xx/patches-5.15/038-v6.7-0002-ARM-dts-BCM5301X-Set-MAC-address-for-Asus-RT-AC87U.patch

@@ -0,0 +1,44 @@
+From a9e79863b62aaaefcdf469fc331bf482ae00db0d Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
+Date: Fri, 1 Sep 2023 14:43:11 +0200
+Subject: [PATCH] ARM: dts: BCM5301X: Set MAC address for Asus RT-AC87U
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Specify NVRAM access and use its "et1macaddr" NVMEM cell.
+
+Signed-off-by: Rafał Miłecki <[email protected]>
+Link: https://lore.kernel.org/r/[email protected]
+Signed-off-by: Florian Fainelli <[email protected]>
+---
+ arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac87u.dts | 11 +++++++++++
+ 1 file changed, 11 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
++++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+@@ -25,6 +25,12 @@
+ 		      <0x88000000 0x08000000>;
+ 	};
+ 
++	nvram@1c080000 {
++		et1macaddr: et1macaddr {
++			#nvmem-cell-cells = <1>;
++		};
++	};
++
+ 	leds {
+ 		compatible = "gpio-leds";
+ 
+@@ -62,6 +68,11 @@
+ 	};
+ };
+ 
++&gmac0 {
++	nvmem-cells = <&et1macaddr 0>;
++	nvmem-cell-names = "mac-address";
++};
++
+ &usb3_phy {
+ 	status = "okay";
+ };

target/linux/bcm53xx/patches-5.15/038-v6.7-0003-ARM-dts-BCM5301X-Relicense-Felix-s-code-to-the-GPL-2.patch

@@ -0,0 +1,57 @@
+From 81ea360a16978a4df61df9db56b171909bd659c0 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
+Date: Sat, 16 Sep 2023 10:30:57 +0200
+Subject: [PATCH] ARM: dts: BCM5301X: Relicense Felix's code to the GPL 2.0+ /
+ MIT
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Move code added by Felix to the bcm-ns.dtsi which uses dual licensing.
+That syncs more Northstar code to be based on the same licensing schema.
+
+This code was added in the commit 1ff80363524c ("ARM: BCM5301X: Add
+profiling support").
+
+Cc: Felix Fietkau <[email protected]>
+Signed-off-by: Rafał Miłecki <[email protected]>
+Acked-by: Felix Fietkau <[email protected]>
+Link: https://lore.kernel.org/r/[email protected]
+Signed-off-by: Florian Fainelli <[email protected]>
+---
+ arch/arm/boot/dts/broadcom/bcm-ns.dtsi   | 7 +++++++
+ arch/arm/boot/dts/broadcom/bcm5301x.dtsi | 7 -------
+ 2 files changed, 7 insertions(+), 7 deletions(-)
+
+--- a/arch/arm/boot/dts/bcm-ns.dtsi
++++ b/arch/arm/boot/dts/bcm-ns.dtsi
+@@ -14,6 +14,13 @@
+ 	#address-cells = <1>;
+ 	#size-cells = <1>;
+ 
++	pmu {
++		compatible = "arm,cortex-a9-pmu";
++		interrupts =
++			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
++			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
++	};
++
+ 	chipcommon-a-bus@18000000 {
+ 		compatible = "simple-bus";
+ 		ranges = <0x00000000 0x18000000 0x00001000>;
+--- a/arch/arm/boot/dts/bcm5301x.dtsi
++++ b/arch/arm/boot/dts/bcm5301x.dtsi
+@@ -26,13 +26,6 @@
+ 		};
+ 	};
+ 
+-	pmu {
+-		compatible = "arm,cortex-a9-pmu";
+-		interrupts =
+-			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+-			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+-	};
+-
+ 	clocks {
+ 		#address-cells = <1>;
+ 		#size-cells = <1>;

target/linux/bcm53xx/patches-5.15/038-v6.7-0004-ARM-dts-BCM5301X-Relicense-Vivek-s-code-to-the-GPL-2.patch

@@ -0,0 +1,104 @@
+From b8d4f7c1be04d66c37c119c501c87bccc4197694 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
+Date: Sat, 16 Sep 2023 10:58:55 +0200
+Subject: [PATCH] ARM: dts: BCM5301X: Relicense Vivek's code to the GPL 2.0+ /
+ MIT
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Move code added by Vivek to the bcm-ns.dtsi which uses dual licensing.
+That syncs more Northstar code to be based on the same licensing schema.
+
+This code was added in the commit 37f6130ec39f ("ARM: dts: BCM5301X:
+Make USB 3.0 PHY use MDIO PHY driver").
+
+Cc: Vivek Unune <[email protected]>
+Signed-off-by: Rafał Miłecki <[email protected]>
+Acked-by: Vivek Unune <[email protected]>
+Link: https://lore.kernel.org/r/[email protected]
+Signed-off-by: Florian Fainelli <[email protected]>
+---
+ arch/arm/boot/dts/broadcom/bcm-ns.dtsi   | 27 ++++++++++++++++++++++++
+ arch/arm/boot/dts/broadcom/bcm5301x.dtsi | 27 ------------------------
+ 2 files changed, 27 insertions(+), 27 deletions(-)
+
+--- a/arch/arm/boot/dts/bcm-ns.dtsi
++++ b/arch/arm/boot/dts/bcm-ns.dtsi
+@@ -327,6 +327,29 @@
+ 		#address-cells = <1>;
+ 	};
+ 
++	mdio-mux@18003000 {
++		compatible = "mdio-mux-mmioreg", "mdio-mux";
++		mdio-parent-bus = <&mdio>;
++		#address-cells = <1>;
++		#size-cells = <0>;
++		reg = <0x18003000 0x4>;
++		mux-mask = <0x200>;
++
++		mdio@0 {
++			reg = <0x0>;
++			#address-cells = <1>;
++			#size-cells = <0>;
++
++			usb3_phy: usb3-phy@10 {
++				compatible = "brcm,ns-ax-usb3-phy";
++				reg = <0x10>;
++				usb3-dmp-syscon = <&usb3_dmp>;
++				#phy-cells = <0>;
++				status = "disabled";
++			};
++		};
++	};
++
+ 	rng: rng@18004000 {
+ 		compatible = "brcm,bcm5301x-rng";
+ 		reg = <0x18004000 0x14>;
+@@ -467,6 +490,10 @@
+ 		brcm,nand-has-wp;
+ 	};
+ 
++	usb3_dmp: syscon@18105000 {
++		reg = <0x18105000 0x1000>;
++	};
++
+ 	thermal-zones {
+ 		cpu_thermal: cpu-thermal {
+ 			polling-delay-passive = <0>;
+--- a/arch/arm/boot/dts/bcm5301x.dtsi
++++ b/arch/arm/boot/dts/bcm5301x.dtsi
+@@ -62,33 +62,6 @@
+ 		};
+ 	};
+ 
+-	mdio-mux@18003000 {
+-		compatible = "mdio-mux-mmioreg", "mdio-mux";
+-		mdio-parent-bus = <&mdio>;
+-		#address-cells = <1>;
+-		#size-cells = <0>;
+-		reg = <0x18003000 0x4>;
+-		mux-mask = <0x200>;
+-
+-		mdio@0 {
+-			reg = <0x0>;
+-			#address-cells = <1>;
+-			#size-cells = <0>;
+-
+-			usb3_phy: usb3-phy@10 {
+-				compatible = "brcm,ns-ax-usb3-phy";
+-				reg = <0x10>;
+-				usb3-dmp-syscon = <&usb3_dmp>;
+-				#phy-cells = <0>;
+-				status = "disabled";
+-			};
+-		};
+-	};
+-
+-	usb3_dmp: syscon@18105000 {
+-		reg = <0x18105000 0x1000>;
+-	};
+-
+ 	i2c0: i2c@18009000 {
+ 		compatible = "brcm,iproc-i2c";
+ 		reg = <0x18009000 0x50>;

target/linux/bcm53xx/patches-5.15/038-v6.7-0005-ARM-dts-BCM5301X-Explicitly-disable-unused-switch-CP.patch

@@ -0,0 +1,377 @@
+From 473baeab929444295b0530f8766e4becb6a08973 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
+Date: Fri, 13 Oct 2023 12:33:13 +0200
+Subject: [PATCH] ARM: dts: BCM5301X: Explicitly disable unused switch CPU
+ ports
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+When redescribing ports I assumed that missing "label" (like "cpu")
+means switch port isn't used. That was incorrect and I realized my
+change made Linux always use the first (5) CPU port (there are 3 of
+them).
+
+While above should technically be possible it often isn't correct:
+1. Non-default switch ports are often connected to Ethernet interfaces
+   not fully covered by vendor setup (they may miss MACs)
+2. On some devices non-default ports require specifying fixed link
+
+This fixes network connectivity for some devices. It was reported &
+tested for Netgear R8000. It also affects Linksys EA9200 with its
+downstream DTS.
+
+Fixes: ba4aebce23b2 ("ARM: dts: BCM5301X: Describe switch ports in the main DTS")
+Signed-off-by: Rafał Miłecki <[email protected]>
+Link: https://lore.kernel.org/r/[email protected]
+Signed-off-by: Florian Fainelli <[email protected]>
+---
+ .../dts/broadcom/bcm4708-buffalo-wzr-1166dhp-common.dtsi  | 8 ++++++++
+ arch/arm/boot/dts/broadcom/bcm4708-luxul-xap-1510.dts     | 8 ++++++++
+ arch/arm/boot/dts/broadcom/bcm4708-luxul-xwc-1000.dts     | 8 ++++++++
+ arch/arm/boot/dts/broadcom/bcm4708-netgear-r6250.dts      | 8 ++++++++
+ arch/arm/boot/dts/broadcom/bcm4708-smartrg-sr400ac.dts    | 8 ++++++++
+ .../boot/dts/broadcom/bcm47081-buffalo-wzr-600dhp2.dts    | 8 ++++++++
+ arch/arm/boot/dts/broadcom/bcm47081-luxul-xap-1410.dts    | 8 ++++++++
+ arch/arm/boot/dts/broadcom/bcm47081-luxul-xwr-1200.dts    | 8 ++++++++
+ arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts      | 8 ++++++++
+ arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts    | 8 ++++++++
+ arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts    | 8 ++++++++
+ arch/arm/boot/dts/broadcom/bcm47094-luxul-abr-4500.dts    | 8 ++++++++
+ arch/arm/boot/dts/broadcom/bcm47094-luxul-xap-1610.dts    | 8 ++++++++
+ arch/arm/boot/dts/broadcom/bcm47094-luxul-xbr-4500.dts    | 8 ++++++++
+ arch/arm/boot/dts/broadcom/bcm47094-luxul-xwc-2000.dts    | 8 ++++++++
+ arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3100.dts    | 8 ++++++++
+ arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts | 8 ++++++++
+ arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts       | 8 ++++++++
+ arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts       | 8 ++++++++
+ arch/arm/boot/dts/broadcom/bcm953012er.dts                | 8 ++++++++
+ 20 files changed, 160 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi
++++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi
+@@ -181,5 +181,13 @@
+ 		port@5 {
+ 			label = "cpu";
+ 		};
++
++		port@7 {
++			status = "disabled";
++		};
++
++		port@8 {
++			status = "disabled";
++		};
+ 	};
+ };
+--- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
++++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
+@@ -85,5 +85,13 @@
+ 		port@5 {
+ 			label = "cpu";
+ 		};
++
++		port@7 {
++			status = "disabled";
++		};
++
++		port@8 {
++			status = "disabled";
++		};
+ 	};
+ };
+--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
++++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
+@@ -88,5 +88,13 @@
+ 		port@5 {
+ 			label = "cpu";
+ 		};
++
++		port@7 {
++			status = "disabled";
++		};
++
++		port@8 {
++			status = "disabled";
++		};
+ 	};
+ };
+--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
++++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+@@ -122,5 +122,13 @@
+ 		port@5 {
+ 			label = "cpu";
+ 		};
++
++		port@7 {
++			status = "disabled";
++		};
++
++		port@8 {
++			status = "disabled";
++		};
+ 	};
+ };
+--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
++++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+@@ -145,6 +145,14 @@
+ 		port@5 {
+ 			label = "cpu";
+ 		};
++
++		port@7 {
++			status = "disabled";
++		};
++
++		port@8 {
++			status = "disabled";
++		};
+ 	};
+ };
+ 
+--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
++++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
+@@ -145,5 +145,13 @@
+ 		port@5 {
+ 			label = "cpu";
+ 		};
++
++		port@7 {
++			status = "disabled";
++		};
++
++		port@8 {
++			status = "disabled";
++		};
+ 	};
+ };
+--- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
++++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
+@@ -81,5 +81,13 @@
+ 		port@5 {
+ 			label = "cpu";
+ 		};
++
++		port@7 {
++			status = "disabled";
++		};
++
++		port@8 {
++			status = "disabled";
++		};
+ 	};
+ };
+--- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
++++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
+@@ -148,5 +148,13 @@
+ 		port@5 {
+ 			label = "cpu";
+ 		};
++
++		port@7 {
++			status = "disabled";
++		};
++
++		port@8 {
++			status = "disabled";
++		};
+ 	};
+ };
+--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
++++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+@@ -227,6 +227,14 @@
+ 			label = "wan";
+ 		};
+ 
++		port@5 {
++			status = "disabled";
++		};
++
++		port@7 {
++			status = "disabled";
++		};
++
+ 		port@8 {
+ 			label = "cpu";
+ 		};
+--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
++++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+@@ -160,6 +160,14 @@
+ 			nvmem-cell-names = "mac-address";
+ 		};
+ 
++		port@5 {
++			status = "disabled";
++		};
++
++		port@7 {
++			status = "disabled";
++		};
++
+ 		port@8 {
+ 			label = "cpu";
+ 		};
+--- a/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
++++ b/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
+@@ -192,6 +192,14 @@
+ 			label = "wan";
+ 		};
+ 
++		port@5 {
++			status = "disabled";
++		};
++
++		port@7 {
++			status = "disabled";
++		};
++
+ 		port@8 {
+ 			label = "cpu";
+ 			phy-mode = "rgmii";
+--- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
++++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
+@@ -107,5 +107,13 @@
+ 		port@5 {
+ 			label = "cpu";
+ 		};
++
++		port@7 {
++			status = "disabled";
++		};
++
++		port@8 {
++			status = "disabled";
++		};
+ 	};
+ };
+--- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
++++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
+@@ -120,5 +120,13 @@
+ 		port@5 {
+ 			label = "cpu";
+ 		};
++
++		port@7 {
++			status = "disabled";
++		};
++
++		port@8 {
++			status = "disabled";
++		};
+ 	};
+ };
+--- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
++++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
+@@ -107,5 +107,13 @@
+ 		port@5 {
+ 			label = "cpu";
+ 		};
++
++		port@7 {
++			status = "disabled";
++		};
++
++		port@8 {
++			status = "disabled";
++		};
+ 	};
+ };
+--- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
++++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
+@@ -75,5 +75,13 @@
+ 		port@5 {
+ 			label = "cpu";
+ 		};
++
++		port@7 {
++			status = "disabled";
++		};
++
++		port@8 {
++			status = "disabled";
++		};
+ 	};
+ };
+--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
++++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
+@@ -147,5 +147,13 @@
+ 		port@5 {
+ 			label = "cpu";
+ 		};
++
++		port@7 {
++			status = "disabled";
++		};
++
++		port@8 {
++			status = "disabled";
++		};
+ 	};
+ };
+--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
++++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
+@@ -158,5 +158,13 @@
+ 		port@5 {
+ 			label = "cpu";
+ 		};
++
++		port@7 {
++			status = "disabled";
++		};
++
++		port@8 {
++			status = "disabled";
++		};
+ 	};
+ };
+--- a/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
++++ b/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
+@@ -124,6 +124,14 @@
+ 				full-duplex;
+ 			};
+ 		};
++
++		port@7 {
++			status = "disabled";
++		};
++
++		port@8 {
++			status = "disabled";
++		};
+ 	};
+ };
+ 
+--- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
++++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
+@@ -185,6 +185,14 @@
+ 				full-duplex;
+ 			};
+ 		};
++
++		port@7 {
++			status = "disabled";
++		};
++
++		port@8 {
++			status = "disabled";
++		};
+ 	};
+ };
+ 
+--- a/arch/arm/boot/dts/bcm953012er.dts
++++ b/arch/arm/boot/dts/bcm953012er.dts
+@@ -84,6 +84,14 @@
+ 			label = "cpu";
+ 			ethernet = <&gmac0>;
+ 		};
++
++		port@7 {
++			status = "disabled";
++		};
++
++		port@8 {
++			status = "disabled";
++		};
+ 	};
+ };
+ 

target/linux/bcm53xx/patches-5.15/038-v6.7-0006-ARM-dts-BCM5301X-Set-fixed-link-for-extra-Netgear-R8.patch

@@ -0,0 +1,47 @@
+From d313b0e9070a7100ca55e64fe3b081d176d8806d Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
+Date: Fri, 13 Oct 2023 12:33:14 +0200
+Subject: [PATCH] ARM: dts: BCM5301X: Set fixed-link for extra Netgear R8000
+ CPU ports
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Ports 5 and 7 are disabled by default because the standard use case is
+for port 8 to manage all CPU directed traffic. For experimentation
+purposes however it is desirable to provide adequate properties such
+that people can experiment with using different ports without having to
+figure out their configuration. Some of the use cases include but are
+not limited to doubling or tripling the bandwidth by leveraging the
+additional ports/Ethernet MAC combinations.
+
+Signed-off-by: Rafał Miłecki <[email protected]>
+Link: https://lore.kernel.org/r/[email protected]
+Signed-off-by: Florian Fainelli <[email protected]>
+---
+ arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts | 10 ++++++++++
+ 1 file changed, 10 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
++++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+@@ -229,10 +229,20 @@
+ 
+ 		port@5 {
+ 			status = "disabled";
++
++			fixed-link {
++				speed = <1000>;
++				full-duplex;
++			};
+ 		};
+ 
+ 		port@7 {
+ 			status = "disabled";
++
++			fixed-link {
++				speed = <1000>;
++				full-duplex;
++			};
+ 		};
+ 
+ 		port@8 {

target/linux/bcm53xx/patches-5.15/304-ARM-dts-BCM5301X-Specify-switch-ports-for-remaining-.patch

@@ -262,7 +262,7 @@ Signed-off-by: Rafał Miłecki <[email protected]>
 +};
 --- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
 +++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-@@ -66,6 +66,32 @@
+@@ -77,6 +77,32 @@
  	status = "okay";
  };
  

target/linux/bcm53xx/patches-6.1/033-v6.7-0001-ARM-dts-BCM5301X-Set-MACs-for-D-Link-DIR-885L.patch

@@ -0,0 +1,56 @@
+From 5cbee5828219c4f7b33e96b5d8ce5e467b2857c8 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
+Date: Fri, 1 Sep 2023 12:55:49 +0200
+Subject: [PATCH] ARM: dts: BCM5301X: Set MACs for D-Link DIR-885L
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Specify NVRAM access and use its "et2macaddr" NVMEM cell.
+
+Signed-off-by: Rafał Miłecki <[email protected]>
+Link: https://lore.kernel.org/r/[email protected]
+Signed-off-by: Florian Fainelli <[email protected]>
+---
+ .../dts/broadcom/bcm47094-dlink-dir-885l.dts     | 16 ++++++++++++++++
+ 1 file changed, 16 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
++++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+@@ -25,6 +25,15 @@
+ 		      <0x88000000 0x08000000>;
+ 	};
+ 
++	nvram@1e3f0000 {
++		compatible = "brcm,nvram";
++		reg = <0x1e3f0000 0x10000>;
++
++		et2macaddr: et2macaddr {
++			#nvmem-cell-cells = <1>;
++		};
++	};
++
+ 	nand_controller: nand-controller@18028000 {
+ 		nand@0 {
+ 			partitions {
+@@ -112,6 +121,11 @@
+ 	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+ };
+ 
++&gmac0 {
++	nvmem-cells = <&et2macaddr 0>;
++	nvmem-cell-names = "mac-address";
++};
++
+ &spi_nor {
+ 	status = "okay";
+ };
+@@ -142,6 +156,8 @@
+ 
+ 		port@4 {
+ 			label = "wan";
++			nvmem-cells = <&et2macaddr 3>;
++			nvmem-cell-names = "mac-address";
+ 		};
+ 
+ 		port@8 {

target/linux/bcm53xx/patches-6.1/033-v6.7-0002-ARM-dts-BCM5301X-Set-MAC-address-for-Asus-RT-AC87U.patch

@@ -0,0 +1,44 @@
+From a9e79863b62aaaefcdf469fc331bf482ae00db0d Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
+Date: Fri, 1 Sep 2023 14:43:11 +0200
+Subject: [PATCH] ARM: dts: BCM5301X: Set MAC address for Asus RT-AC87U
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Specify NVRAM access and use its "et1macaddr" NVMEM cell.
+
+Signed-off-by: Rafał Miłecki <[email protected]>
+Link: https://lore.kernel.org/r/[email protected]
+Signed-off-by: Florian Fainelli <[email protected]>
+---
+ arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac87u.dts | 11 +++++++++++
+ 1 file changed, 11 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
++++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+@@ -25,6 +25,12 @@
+ 		      <0x88000000 0x08000000>;
+ 	};
+ 
++	nvram@1c080000 {
++		et1macaddr: et1macaddr {
++			#nvmem-cell-cells = <1>;
++		};
++	};
++
+ 	leds {
+ 		compatible = "gpio-leds";
+ 
+@@ -62,6 +68,11 @@
+ 	};
+ };
+ 
++&gmac0 {
++	nvmem-cells = <&et1macaddr 0>;
++	nvmem-cell-names = "mac-address";
++};
++
+ &usb3_phy {
+ 	status = "okay";
+ };

target/linux/bcm53xx/patches-6.1/033-v6.7-0003-ARM-dts-BCM5301X-Relicense-Felix-s-code-to-the-GPL-2.patch

@@ -0,0 +1,57 @@
+From 81ea360a16978a4df61df9db56b171909bd659c0 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
+Date: Sat, 16 Sep 2023 10:30:57 +0200
+Subject: [PATCH] ARM: dts: BCM5301X: Relicense Felix's code to the GPL 2.0+ /
+ MIT
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Move code added by Felix to the bcm-ns.dtsi which uses dual licensing.
+That syncs more Northstar code to be based on the same licensing schema.
+
+This code was added in the commit 1ff80363524c ("ARM: BCM5301X: Add
+profiling support").
+
+Cc: Felix Fietkau <[email protected]>
+Signed-off-by: Rafał Miłecki <[email protected]>
+Acked-by: Felix Fietkau <[email protected]>
+Link: https://lore.kernel.org/r/[email protected]
+Signed-off-by: Florian Fainelli <[email protected]>
+---
+ arch/arm/boot/dts/broadcom/bcm-ns.dtsi   | 7 +++++++
+ arch/arm/boot/dts/broadcom/bcm5301x.dtsi | 7 -------
+ 2 files changed, 7 insertions(+), 7 deletions(-)
+
+--- a/arch/arm/boot/dts/bcm-ns.dtsi
++++ b/arch/arm/boot/dts/bcm-ns.dtsi
+@@ -14,6 +14,13 @@
+ 	#address-cells = <1>;
+ 	#size-cells = <1>;
+ 
++	pmu {
++		compatible = "arm,cortex-a9-pmu";
++		interrupts =
++			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
++			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
++	};
++
+ 	chipcommon-a-bus@18000000 {
+ 		compatible = "simple-bus";
+ 		ranges = <0x00000000 0x18000000 0x00001000>;
+--- a/arch/arm/boot/dts/bcm5301x.dtsi
++++ b/arch/arm/boot/dts/bcm5301x.dtsi
+@@ -26,13 +26,6 @@
+ 		};
+ 	};
+ 
+-	pmu {
+-		compatible = "arm,cortex-a9-pmu";
+-		interrupts =
+-			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+-			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+-	};
+-
+ 	clocks {
+ 		#address-cells = <1>;
+ 		#size-cells = <1>;

target/linux/bcm53xx/patches-6.1/033-v6.7-0004-ARM-dts-BCM5301X-Relicense-Vivek-s-code-to-the-GPL-2.patch

@@ -0,0 +1,104 @@
+From b8d4f7c1be04d66c37c119c501c87bccc4197694 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
+Date: Sat, 16 Sep 2023 10:58:55 +0200
+Subject: [PATCH] ARM: dts: BCM5301X: Relicense Vivek's code to the GPL 2.0+ /
+ MIT
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Move code added by Vivek to the bcm-ns.dtsi which uses dual licensing.
+That syncs more Northstar code to be based on the same licensing schema.
+
+This code was added in the commit 37f6130ec39f ("ARM: dts: BCM5301X:
+Make USB 3.0 PHY use MDIO PHY driver").
+
+Cc: Vivek Unune <[email protected]>
+Signed-off-by: Rafał Miłecki <[email protected]>
+Acked-by: Vivek Unune <[email protected]>
+Link: https://lore.kernel.org/r/[email protected]
+Signed-off-by: Florian Fainelli <[email protected]>
+---
+ arch/arm/boot/dts/broadcom/bcm-ns.dtsi   | 27 ++++++++++++++++++++++++
+ arch/arm/boot/dts/broadcom/bcm5301x.dtsi | 27 ------------------------
+ 2 files changed, 27 insertions(+), 27 deletions(-)
+
+--- a/arch/arm/boot/dts/bcm-ns.dtsi
++++ b/arch/arm/boot/dts/bcm-ns.dtsi
+@@ -327,6 +327,29 @@
+ 		#address-cells = <1>;
+ 	};
+ 
++	mdio-mux@18003000 {
++		compatible = "mdio-mux-mmioreg", "mdio-mux";
++		mdio-parent-bus = <&mdio>;
++		#address-cells = <1>;
++		#size-cells = <0>;
++		reg = <0x18003000 0x4>;
++		mux-mask = <0x200>;
++
++		mdio@0 {
++			reg = <0x0>;
++			#address-cells = <1>;
++			#size-cells = <0>;
++
++			usb3_phy: usb3-phy@10 {
++				compatible = "brcm,ns-ax-usb3-phy";
++				reg = <0x10>;
++				usb3-dmp-syscon = <&usb3_dmp>;
++				#phy-cells = <0>;
++				status = "disabled";
++			};
++		};
++	};
++
+ 	rng: rng@18004000 {
+ 		compatible = "brcm,bcm5301x-rng";
+ 		reg = <0x18004000 0x14>;
+@@ -467,6 +490,10 @@
+ 		brcm,nand-has-wp;
+ 	};
+ 
++	usb3_dmp: syscon@18105000 {
++		reg = <0x18105000 0x1000>;
++	};
++
+ 	thermal-zones {
+ 		cpu_thermal: cpu-thermal {
+ 			polling-delay-passive = <0>;
+--- a/arch/arm/boot/dts/bcm5301x.dtsi
++++ b/arch/arm/boot/dts/bcm5301x.dtsi
+@@ -62,33 +62,6 @@
+ 		};
+ 	};
+ 
+-	mdio-mux@18003000 {
+-		compatible = "mdio-mux-mmioreg", "mdio-mux";
+-		mdio-parent-bus = <&mdio>;
+-		#address-cells = <1>;
+-		#size-cells = <0>;
+-		reg = <0x18003000 0x4>;
+-		mux-mask = <0x200>;
+-
+-		mdio@0 {
+-			reg = <0x0>;
+-			#address-cells = <1>;
+-			#size-cells = <0>;
+-
+-			usb3_phy: usb3-phy@10 {
+-				compatible = "brcm,ns-ax-usb3-phy";
+-				reg = <0x10>;
+-				usb3-dmp-syscon = <&usb3_dmp>;
+-				#phy-cells = <0>;
+-				status = "disabled";
+-			};
+-		};
+-	};
+-
+-	usb3_dmp: syscon@18105000 {
+-		reg = <0x18105000 0x1000>;
+-	};
+-
+ 	i2c0: i2c@18009000 {
+ 		compatible = "brcm,iproc-i2c";
+ 		reg = <0x18009000 0x50>;

target/linux/bcm53xx/patches-6.1/033-v6.7-0005-ARM-dts-BCM5301X-Explicitly-disable-unused-switch-CP.patch

@@ -0,0 +1,377 @@
+From 473baeab929444295b0530f8766e4becb6a08973 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
+Date: Fri, 13 Oct 2023 12:33:13 +0200
+Subject: [PATCH] ARM: dts: BCM5301X: Explicitly disable unused switch CPU
+ ports
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+When redescribing ports I assumed that missing "label" (like "cpu")
+means switch port isn't used. That was incorrect and I realized my
+change made Linux always use the first (5) CPU port (there are 3 of
+them).
+
+While above should technically be possible it often isn't correct:
+1. Non-default switch ports are often connected to Ethernet interfaces
+   not fully covered by vendor setup (they may miss MACs)
+2. On some devices non-default ports require specifying fixed link
+
+This fixes network connectivity for some devices. It was reported &
+tested for Netgear R8000. It also affects Linksys EA9200 with its
+downstream DTS.
+
+Fixes: ba4aebce23b2 ("ARM: dts: BCM5301X: Describe switch ports in the main DTS")
+Signed-off-by: Rafał Miłecki <[email protected]>
+Link: https://lore.kernel.org/r/[email protected]
+Signed-off-by: Florian Fainelli <[email protected]>
+---
+ .../dts/broadcom/bcm4708-buffalo-wzr-1166dhp-common.dtsi  | 8 ++++++++
+ arch/arm/boot/dts/broadcom/bcm4708-luxul-xap-1510.dts     | 8 ++++++++
+ arch/arm/boot/dts/broadcom/bcm4708-luxul-xwc-1000.dts     | 8 ++++++++
+ arch/arm/boot/dts/broadcom/bcm4708-netgear-r6250.dts      | 8 ++++++++
+ arch/arm/boot/dts/broadcom/bcm4708-smartrg-sr400ac.dts    | 8 ++++++++
+ .../boot/dts/broadcom/bcm47081-buffalo-wzr-600dhp2.dts    | 8 ++++++++
+ arch/arm/boot/dts/broadcom/bcm47081-luxul-xap-1410.dts    | 8 ++++++++
+ arch/arm/boot/dts/broadcom/bcm47081-luxul-xwr-1200.dts    | 8 ++++++++
+ arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts      | 8 ++++++++
+ arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts    | 8 ++++++++
+ arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts    | 8 ++++++++
+ arch/arm/boot/dts/broadcom/bcm47094-luxul-abr-4500.dts    | 8 ++++++++
+ arch/arm/boot/dts/broadcom/bcm47094-luxul-xap-1610.dts    | 8 ++++++++
+ arch/arm/boot/dts/broadcom/bcm47094-luxul-xbr-4500.dts    | 8 ++++++++
+ arch/arm/boot/dts/broadcom/bcm47094-luxul-xwc-2000.dts    | 8 ++++++++
+ arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3100.dts    | 8 ++++++++
+ arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts | 8 ++++++++
+ arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts       | 8 ++++++++
+ arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts       | 8 ++++++++
+ arch/arm/boot/dts/broadcom/bcm953012er.dts                | 8 ++++++++
+ 20 files changed, 160 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi
++++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi
+@@ -181,5 +181,13 @@
+ 		port@5 {
+ 			label = "cpu";
+ 		};
++
++		port@7 {
++			status = "disabled";
++		};
++
++		port@8 {
++			status = "disabled";
++		};
+ 	};
+ };
+--- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
++++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
+@@ -85,5 +85,13 @@
+ 		port@5 {
+ 			label = "cpu";
+ 		};
++
++		port@7 {
++			status = "disabled";
++		};
++
++		port@8 {
++			status = "disabled";
++		};
+ 	};
+ };
+--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
++++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
+@@ -88,5 +88,13 @@
+ 		port@5 {
+ 			label = "cpu";
+ 		};
++
++		port@7 {
++			status = "disabled";
++		};
++
++		port@8 {
++			status = "disabled";
++		};
+ 	};
+ };
+--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
++++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+@@ -122,5 +122,13 @@
+ 		port@5 {
+ 			label = "cpu";
+ 		};
++
++		port@7 {
++			status = "disabled";
++		};
++
++		port@8 {
++			status = "disabled";
++		};
+ 	};
+ };
+--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
++++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+@@ -145,6 +145,14 @@
+ 		port@5 {
+ 			label = "cpu";
+ 		};
++
++		port@7 {
++			status = "disabled";
++		};
++
++		port@8 {
++			status = "disabled";
++		};
+ 	};
+ };
+ 
+--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
++++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
+@@ -145,5 +145,13 @@
+ 		port@5 {
+ 			label = "cpu";
+ 		};
++
++		port@7 {
++			status = "disabled";
++		};
++
++		port@8 {
++			status = "disabled";
++		};
+ 	};
+ };
+--- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
++++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
+@@ -81,5 +81,13 @@
+ 		port@5 {
+ 			label = "cpu";
+ 		};
++
++		port@7 {
++			status = "disabled";
++		};
++
++		port@8 {
++			status = "disabled";
++		};
+ 	};
+ };
+--- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
++++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
+@@ -148,5 +148,13 @@
+ 		port@5 {
+ 			label = "cpu";
+ 		};
++
++		port@7 {
++			status = "disabled";
++		};
++
++		port@8 {
++			status = "disabled";
++		};
+ 	};
+ };
+--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
++++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+@@ -227,6 +227,14 @@
+ 			label = "wan";
+ 		};
+ 
++		port@5 {
++			status = "disabled";
++		};
++
++		port@7 {
++			status = "disabled";
++		};
++
+ 		port@8 {
+ 			label = "cpu";
+ 		};
+--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
++++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+@@ -160,6 +160,14 @@
+ 			nvmem-cell-names = "mac-address";
+ 		};
+ 
++		port@5 {
++			status = "disabled";
++		};
++
++		port@7 {
++			status = "disabled";
++		};
++
+ 		port@8 {
+ 			label = "cpu";
+ 		};
+--- a/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
++++ b/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
+@@ -192,6 +192,14 @@
+ 			label = "wan";
+ 		};
+ 
++		port@5 {
++			status = "disabled";
++		};
++
++		port@7 {
++			status = "disabled";
++		};
++
+ 		port@8 {
+ 			label = "cpu";
+ 			phy-mode = "rgmii";
+--- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
++++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
+@@ -107,5 +107,13 @@
+ 		port@5 {
+ 			label = "cpu";
+ 		};
++
++		port@7 {
++			status = "disabled";
++		};
++
++		port@8 {
++			status = "disabled";
++		};
+ 	};
+ };
+--- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
++++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
+@@ -120,5 +120,13 @@
+ 		port@5 {
+ 			label = "cpu";
+ 		};
++
++		port@7 {
++			status = "disabled";
++		};
++
++		port@8 {
++			status = "disabled";
++		};
+ 	};
+ };
+--- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
++++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
+@@ -107,5 +107,13 @@
+ 		port@5 {
+ 			label = "cpu";
+ 		};
++
++		port@7 {
++			status = "disabled";
++		};
++
++		port@8 {
++			status = "disabled";
++		};
+ 	};
+ };
+--- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
++++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
+@@ -75,5 +75,13 @@
+ 		port@5 {
+ 			label = "cpu";
+ 		};
++
++		port@7 {
++			status = "disabled";
++		};
++
++		port@8 {
++			status = "disabled";
++		};
+ 	};
+ };
+--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
++++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
+@@ -147,5 +147,13 @@
+ 		port@5 {
+ 			label = "cpu";
+ 		};
++
++		port@7 {
++			status = "disabled";
++		};
++
++		port@8 {
++			status = "disabled";
++		};
+ 	};
+ };
+--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
++++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
+@@ -158,5 +158,13 @@
+ 		port@5 {
+ 			label = "cpu";
+ 		};
++
++		port@7 {
++			status = "disabled";
++		};
++
++		port@8 {
++			status = "disabled";
++		};
+ 	};
+ };
+--- a/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
++++ b/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
+@@ -124,6 +124,14 @@
+ 				full-duplex;
+ 			};
+ 		};
++
++		port@7 {
++			status = "disabled";
++		};
++
++		port@8 {
++			status = "disabled";
++		};
+ 	};
+ };
+ 
+--- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
++++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
+@@ -185,6 +185,14 @@
+ 				full-duplex;
+ 			};
+ 		};
++
++		port@7 {
++			status = "disabled";
++		};
++
++		port@8 {
++			status = "disabled";
++		};
+ 	};
+ };
+ 
+--- a/arch/arm/boot/dts/bcm953012er.dts
++++ b/arch/arm/boot/dts/bcm953012er.dts
+@@ -84,6 +84,14 @@
+ 			label = "cpu";
+ 			ethernet = <&gmac0>;
+ 		};
++
++		port@7 {
++			status = "disabled";
++		};
++
++		port@8 {
++			status = "disabled";
++		};
+ 	};
+ };
+ 

target/linux/bcm53xx/patches-6.1/033-v6.7-0006-ARM-dts-BCM5301X-Set-fixed-link-for-extra-Netgear-R8.patch

@@ -0,0 +1,47 @@
+From d313b0e9070a7100ca55e64fe3b081d176d8806d Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
+Date: Fri, 13 Oct 2023 12:33:14 +0200
+Subject: [PATCH] ARM: dts: BCM5301X: Set fixed-link for extra Netgear R8000
+ CPU ports
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Ports 5 and 7 are disabled by default because the standard use case is
+for port 8 to manage all CPU directed traffic. For experimentation
+purposes however it is desirable to provide adequate properties such
+that people can experiment with using different ports without having to
+figure out their configuration. Some of the use cases include but are
+not limited to doubling or tripling the bandwidth by leveraging the
+additional ports/Ethernet MAC combinations.
+
+Signed-off-by: Rafał Miłecki <[email protected]>
+Link: https://lore.kernel.org/r/[email protected]
+Signed-off-by: Florian Fainelli <[email protected]>
+---
+ arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts | 10 ++++++++++
+ 1 file changed, 10 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
++++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+@@ -229,10 +229,20 @@
+ 
+ 		port@5 {
+ 			status = "disabled";
++
++			fixed-link {
++				speed = <1000>;
++				full-duplex;
++			};
+ 		};
+ 
+ 		port@7 {
+ 			status = "disabled";
++
++			fixed-link {
++				speed = <1000>;
++				full-duplex;
++			};
+ 		};
+ 
+ 		port@8 {

target/linux/bcm53xx/patches-6.1/304-ARM-dts-BCM5301X-Specify-switch-ports-for-remaining-.patch

@@ -262,7 +262,7 @@ Signed-off-by: Rafał Miłecki <[email protected]>
 +};
 --- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
 +++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-@@ -66,6 +66,32 @@
+@@ -77,6 +77,32 @@
  	status = "okay";
  };