ipq806x: 5.15: revert unwanted DSA conversion for ASRock G10

In refreshing DTS to the upstream version an unwanted change slipped in
the commit. The ASRock G10 dts got converted to DSA without any support.

Revert this to swconfig driver to restore normal functionality.

Fixes: 88bf6525251f ("ipq806x: 5.15: replace dtsi patches with upstream version")
Signed-off-by: Christian Marangi <[email protected]>

target/linux/ipq806x/files-5.15/arch/arm/boot/dts/qcom-ipq8064-g10.dts

@@ -158,71 +158,17 @@
 	pinctrl-0 = <&mdio0_pins>;
 	pinctrl-names = "default";
 
-	switch@10 {
-		compatible = "qca,qca8337";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x10>;
-
-		qca8k,rgmii56_1_8v;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				label = "cpu";
-				ethernet = <&gmac1>;
-				phy-mode = "rgmii-id";
-
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "lan1";
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan2";
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "lan3";
-			};
-
-			port@4 {
-				reg = <4>;
-				label = "lan4";
-			};
-
-			port@5 {
-				reg = <5>;
-				label = "wan";
-			};
-
-			/*
-			port@6 {
-					reg = <0>;
-					label = "cpu";
-					ethernet = <&gmac2>;
-					phy-mode = "rgmii";
-
-					fixed-link {
-							speed = <1000>;
-							full-duplex;
-							pause;
-							asym-pause;
-					};
-			};
-			*/
-		};
+	ethernet-phy@0 {
+		reg = <0>;
+		qca,ar8327-initvals = <
+			0x00004 0x7600000   /* PAD0_MODE */
+			0x00008 0x1000000   /* PAD5_MODE */
+			0x0000c 0x80        /* PAD6_MODE */
+			0x000e4 0x6a545     /* MAC_POWER_SEL */
+			0x000e0 0xc74164de  /* SGMII_CTRL */
+			0x0007c 0x4e        /* PORT0_STATUS */
+			0x00094 0x4e        /* PORT6_STATUS */
+			>;
 	};
 };