brcm2708: update to latest version

As usual these patches were extracted from the raspberry pi repo:
https://github.com/raspberrypi/linux/commits/rpi-4.4.y

Signed-off-by: Álvaro Fernández Rojas <[email protected]>

target/linux/brcm2708/bcm2708/config-4.4

@@ -266,6 +266,7 @@ CONFIG_NO_HZ_IDLE=y
 CONFIG_OABI_COMPAT=y
 CONFIG_OF=y
 CONFIG_OF_ADDRESS=y
+CONFIG_OF_CONFIGFS=y
 CONFIG_OF_EARLY_FLATTREE=y
 CONFIG_OF_FLATTREE=y
 CONFIG_OF_GPIO=y

target/linux/brcm2708/bcm2709/config-4.4

@@ -283,6 +283,7 @@ CONFIG_NR_CPUS=4
 CONFIG_OABI_COMPAT=y
 CONFIG_OF=y
 CONFIG_OF_ADDRESS=y
+CONFIG_OF_CONFIGFS=y
 CONFIG_OF_EARLY_FLATTREE=y
 CONFIG_OF_FLATTREE=y
 CONFIG_OF_GPIO=y

target/linux/brcm2708/bcm2710/config-4.4

@@ -283,6 +283,7 @@ CONFIG_NR_CPUS=4
 CONFIG_OABI_COMPAT=y
 CONFIG_OF=y
 CONFIG_OF_ADDRESS=y
+CONFIG_OF_CONFIGFS=y
 CONFIG_OF_EARLY_FLATTREE=y
 CONFIG_OF_FLATTREE=y
 CONFIG_OF_GPIO=y

target/linux/brcm2708/image/Makefile

@@ -33,7 +33,7 @@ define Build/boot-img
 	mcopy -i [email protected] $(word 1,$^) ::kernel.img
 	$(foreach dts,$(shell echo $(DEVICE_DTS)),mcopy -i [email protected] $(DTS_DIR)/$(dts).dtb ::;)
 	mmd -i [email protected] ::/overlays
-	mcopy -i [email protected] $(DTS_DIR)/overlays/*.dtb ::/overlays/
+	mcopy -i [email protected] $(DTS_DIR)/overlays/*.dtbo ::/overlays/
 	mcopy -i [email protected] $(DTS_DIR)/overlays/README ::/overlays/
 endef
 

target/linux/brcm2708/image/config.txt

@@ -476,7 +476,14 @@
 ##     Stop start.elf from filling in ATAGS (memory from 0x100) before
 ##     launching kernel
 ##
-disable_commandline_tags=2
+#disable_commandline_tags=2
+
+## enable_uart
+##     Enables or disables uart pin multiplexing
+##     Raspberry Pi 1/2: if unset, uart is enabled by default
+##     Raspberry Pi 3: if unset uart is disabled by default
+##
+enable_uart=1
 
 ## cmdline (string)
 ##     Command line parameters. Can be used instead of cmdline.txt file
@@ -491,7 +498,7 @@ disable_commandline_tags=2
 ## kernel_address
 ##     Address to load kernel.img file at
 ##
-kernel_address=0x8000
+#kernel_address=0x8000
 
 ## ramfsfile (string)
 ##     ramfs file to load
@@ -515,21 +522,21 @@ kernel_address=0x8000
 ## device_tree_address
 ##     Address to load device_tree at
 ##
-device_tree_address=0x100
+#device_tree_address=0x100
 
 ## init_uart_baud
 ##     Initial uart baud rate.
 ##
 ##     Default 115200
 ##
-init_uart_baud=115200
+#init_uart_baud=115200
 
 ## init_uart_clock
 ##     Initial uart clock.
 ##
 ##     Default 3000000 (3MHz)
 ##
-init_uart_clock=3000000
+#init_uart_clock=3000000
 
 ## init_emmc_clock
 ##     Initial emmc clock, increasing this can speedup your SD-card.

target/linux/brcm2708/patches-4.4/0001-smsx95xx-fix-crimes-against-truesize.patch

@@ -1,7 +1,7 @@
-From b6cc28abbbf710379772d3da9227ce66926c46a3 Mon Sep 17 00:00:00 2001
+From 23b133903a357066adb48bceb76aba8bd30d8c66 Mon Sep 17 00:00:00 2001
 From: Steve Glendinning <[email protected]>
 Date: Thu, 19 Feb 2015 18:47:12 +0000
-Subject: [PATCH 001/170] smsx95xx: fix crimes against truesize
+Subject: [PATCH 001/232] smsx95xx: fix crimes against truesize
 
 smsc95xx is adjusting truesize when it shouldn't, and following a recent patch from Eric this is now triggering warnings.
 

target/linux/brcm2708/patches-4.4/0002-smsc95xx-Disable-turbo-mode-by-default.patch

@@ -1,7 +1,7 @@
-From 37e24d2f0af32632a17692076dddcf176d1af1f7 Mon Sep 17 00:00:00 2001
+From e7515ee9af1d150d50b55d8f8f53d735a23cb253 Mon Sep 17 00:00:00 2001
 From: popcornmix <[email protected]>
 Date: Fri, 17 Apr 2015 16:58:45 +0100
-Subject: [PATCH 002/170] smsc95xx: Disable turbo mode by default
+Subject: [PATCH 002/232] smsc95xx: Disable turbo mode by default
 
 ---
  drivers/net/usb/smsc95xx.c | 2 +-

target/linux/brcm2708/patches-4.4/0003-vmstat-Workaround-for-issue-where-dirty-page-count-g.patch

@@ -1,7 +1,7 @@
-From d5cb475205138f9df1fdbb74d8810ab1928696ea Mon Sep 17 00:00:00 2001
+From 849ff5353023c95d40040ecfd279e216074b3d1c Mon Sep 17 00:00:00 2001
 From: popcornmix <[email protected]>
 Date: Wed, 18 Jun 2014 13:42:01 +0100
-Subject: [PATCH 003/170] vmstat: Workaround for issue where dirty page count
+Subject: [PATCH 003/232] vmstat: Workaround for issue where dirty page count
  goes negative
 
 See:

target/linux/brcm2708/patches-4.4/0004-BCM2835_DT-Fix-I2S-register-map.patch

@@ -1,7 +1,7 @@
-From 249a499b1d4b6f8a57b3377d4f505841e99f60c8 Mon Sep 17 00:00:00 2001
+From d29365673ed37e7688bd3f35c4a5ad719f878190 Mon Sep 17 00:00:00 2001
 From: Robert Tiemann <[email protected]>
 Date: Mon, 20 Jul 2015 11:01:25 +0200
-Subject: [PATCH 004/170] BCM2835_DT: Fix I2S register map
+Subject: [PATCH 004/232] BCM2835_DT: Fix I2S register map
 
 ---
  Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt   | 4 ++--

target/linux/brcm2708/patches-4.4/0005-irq-bcm2836-Prevent-spurious-interrupts-and-trap-the.patch

@@ -1,7 +1,7 @@
-From c24657505a2aac71d0409b0ef703fc21ecab4b2e Mon Sep 17 00:00:00 2001
+From c891de13b385afb3e4b2c97ac5bbea7e2d97252f Mon Sep 17 00:00:00 2001
 From: Phil Elwell <[email protected]>
 Date: Fri, 4 Dec 2015 17:41:50 +0000
-Subject: [PATCH 005/170] irq-bcm2836: Prevent spurious interrupts, and trap
+Subject: [PATCH 005/232] irq-bcm2836: Prevent spurious interrupts, and trap
  them early
 
 The old arch-specific IRQ macros included a dsb to ensure the

target/linux/brcm2708/patches-4.4/0006-irqchip-bcm2835-Add-FIQ-support.patch

@@ -1,7 +1,7 @@
-From 229bcf2e73ce37e8a18d68773471024c848d84bd Mon Sep 17 00:00:00 2001
+From 60f7ee79b375d72f5ef46ec542b925b1f1428bad Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <[email protected]>
 Date: Fri, 12 Jun 2015 19:01:05 +0200
-Subject: [PATCH 006/170] irqchip: bcm2835: Add FIQ support
+Subject: [PATCH 006/232] irqchip: bcm2835: Add FIQ support
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.4/0007-irqchip-irq-bcm2835-Add-2836-FIQ-support.patch

@@ -1,7 +1,7 @@
-From 6780f0a5c6af19f2b9850e961a0f81fbfdfa48fe Mon Sep 17 00:00:00 2001
+From 890dccbb9c60be182adefb61b3ede805ccba1a91 Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <[email protected]>
 Date: Fri, 23 Oct 2015 16:26:55 +0200
-Subject: [PATCH 007/170] irqchip: irq-bcm2835: Add 2836 FIQ support
+Subject: [PATCH 007/232] irqchip: irq-bcm2835: Add 2836 FIQ support
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.4/0008-serial-8250-Don-t-crash-when-nr_uarts-is-0.patch

@@ -1,7 +1,7 @@
-From 4b9529b98c01569dff06f4e67ba28a47318e5ea5 Mon Sep 17 00:00:00 2001
+From 9a27662aac88f95b3de1915333a0265614f88a0d Mon Sep 17 00:00:00 2001
 From: Phil Elwell <[email protected]>
 Date: Tue, 30 Jun 2015 14:12:42 +0100
-Subject: [PATCH 008/170] serial: 8250: Don't crash when nr_uarts is 0
+Subject: [PATCH 008/232] serial: 8250: Don't crash when nr_uarts is 0
 
 ---
  drivers/tty/serial/8250/8250_core.c | 2 ++

target/linux/brcm2708/patches-4.4/0009-pinctrl-bcm2835-Set-base-to-0-give-expected-gpio-num.patch

@@ -1,7 +1,7 @@
-From 5fd6ab82b1027504faa66cf4fc8b999fafaacd12 Mon Sep 17 00:00:00 2001
+From 4d7ff05e4d4d8d8adb4e7b4dd5fa8f63ae2be0f6 Mon Sep 17 00:00:00 2001
 From: notro <[email protected]>
 Date: Thu, 10 Jul 2014 13:59:47 +0200
-Subject: [PATCH 009/170] pinctrl-bcm2835: Set base to 0 give expected gpio
+Subject: [PATCH 009/232] pinctrl-bcm2835: Set base to 0 give expected gpio
  numbering
 
 Signed-off-by: Noralf Tronnes <[email protected]>

target/linux/brcm2708/patches-4.4/0010-pinctrl-bcm2835-Fix-interrupt-handling-for-GPIOs-28-.patch

@@ -1,7 +1,7 @@
-From 4254ef2647e89061427836443eac60351b3306a7 Mon Sep 17 00:00:00 2001
+From 969dc44a700e1be13c3f80445d40c1fe51cc4370 Mon Sep 17 00:00:00 2001
 From: Phil Elwell <[email protected]>
 Date: Tue, 24 Feb 2015 13:40:50 +0000
-Subject: [PATCH 010/170] pinctrl-bcm2835: Fix interrupt handling for GPIOs
+Subject: [PATCH 010/232] pinctrl-bcm2835: Fix interrupt handling for GPIOs
  28-31 and 46-53
 
 Contrary to the documentation, the BCM2835 GPIO controller actually has

target/linux/brcm2708/patches-4.4/0011-pinctrl-bcm2835-Only-request-the-interrupts-listed-i.patch

@@ -1,7 +1,7 @@
-From 93b12e64d0e2a8a65189dedd667e00b0a0fab60a Mon Sep 17 00:00:00 2001
+From b949246bf51fa852bad45136cdd6bcd91a29539e Mon Sep 17 00:00:00 2001
 From: Phil Elwell <[email protected]>
 Date: Thu, 26 Feb 2015 09:58:22 +0000
-Subject: [PATCH 011/170] pinctrl-bcm2835: Only request the interrupts listed
+Subject: [PATCH 011/232] pinctrl-bcm2835: Only request the interrupts listed
  in the DTB
 
 Although the GPIO controller can generate three interrupts (four counting

target/linux/brcm2708/patches-4.4/0012-spi-bcm2835-Support-pin-groups-other-than-7-11.patch

@@ -1,7 +1,7 @@
-From bb8ff388ad26721eebb7249afb6f6f57bc196de4 Mon Sep 17 00:00:00 2001
+From 19bcdacc5a67abe6a2d604a39ddfed5a54c77b2e Mon Sep 17 00:00:00 2001
 From: Phil Elwell <[email protected]>
 Date: Wed, 24 Jun 2015 14:10:44 +0100
-Subject: [PATCH 012/170] spi-bcm2835: Support pin groups other than 7-11
+Subject: [PATCH 012/232] spi-bcm2835: Support pin groups other than 7-11
 
 The spi-bcm2835 driver automatically uses GPIO chip-selects due to
 some unreliability of the native ones. In doing so it chooses the

target/linux/brcm2708/patches-4.4/0013-ARM-bcm2835-Set-Serial-number-and-Revision.patch

@@ -1,7 +1,7 @@
-From bfcfed788d152e828747ea889a88f8b179217ddb Mon Sep 17 00:00:00 2001
+From 7ce5cbfba6e930c2178f342a4390972f1efd75ef Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <[email protected]>
 Date: Wed, 3 Jun 2015 12:26:13 +0200
-Subject: [PATCH 013/170] ARM: bcm2835: Set Serial number and Revision
+Subject: [PATCH 013/232] ARM: bcm2835: Set Serial number and Revision
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.4/0014-bcm2835-i2s-get-base-address-for-DMA-from-devicetree.patch

@@ -1,7 +1,7 @@
-From fb968a02c00e2722df2dcfec6f54b7524ff5a155 Mon Sep 17 00:00:00 2001
+From 569baa856d805e594011f2d1444b6849c291544d Mon Sep 17 00:00:00 2001
 From: Matthias Reichl <[email protected]>
 Date: Sun, 11 Oct 2015 16:44:05 +0200
-Subject: [PATCH 014/170] bcm2835-i2s: get base address for DMA from devicetree
+Subject: [PATCH 014/232] bcm2835-i2s: get base address for DMA from devicetree
 
 Code copied from spi-bcm2835. Get physical address from devicetree
 instead of using hardcoded constant.

target/linux/brcm2708/patches-4.4/0015-bcm2835-i2s-add-24bit-support-update-bclk_ratio-to-m.patch

@@ -1,7 +1,7 @@
-From abbe565abfe075b76e01b9671c6fc4cf42cc0328 Mon Sep 17 00:00:00 2001
+From c61a7aef15a1aee86e1de59dca2ad7002995f9cf Mon Sep 17 00:00:00 2001
 From: Matthias Reichl <[email protected]>
 Date: Sun, 11 Oct 2015 15:21:16 +0200
-Subject: [PATCH 015/170] bcm2835-i2s: add 24bit support, update bclk_ratio to
+Subject: [PATCH 015/232] bcm2835-i2s: add 24bit support, update bclk_ratio to
  more correct values
 
 Code ported from bcm2708-i2s driver in Raspberry Pi tree.

target/linux/brcm2708/patches-4.4/0016-bcm2835-i2s-setup-clock-only-if-CPU-is-clock-master.patch

@@ -1,7 +1,7 @@
-From b2cc62cd13099d6d2f21b9927df248aa3bdd8d5b Mon Sep 17 00:00:00 2001
+From e2a75ce0e2b6319150e14401f9822adba7895c9c Mon Sep 17 00:00:00 2001
 From: Matthias Reichl <[email protected]>
 Date: Sun, 11 Oct 2015 15:25:51 +0200
-Subject: [PATCH 016/170] bcm2835-i2s: setup clock only if CPU is clock master
+Subject: [PATCH 016/232] bcm2835-i2s: setup clock only if CPU is clock master
 
 Code ported from bcm2708-i2s driver in Raspberry Pi tree.
 

target/linux/brcm2708/patches-4.4/0017-bcm2835-i2s-Eliminate-debugfs-directory-error.patch

@@ -1,7 +1,7 @@
-From 71b2c93cd332be280b9ca7f293e463f30d5fb108 Mon Sep 17 00:00:00 2001
+From 433841fc5958e1ddbd503b579a022fb67defd74b Mon Sep 17 00:00:00 2001
 From: Matthias Reichl <[email protected]>
 Date: Sun, 11 Oct 2015 15:49:51 +0200
-Subject: [PATCH 017/170] bcm2835-i2s: Eliminate debugfs directory error
+Subject: [PATCH 017/232] bcm2835-i2s: Eliminate debugfs directory error
 
 Code ported from bcm2708-i2s driver in Raspberry Pi tree.
 

target/linux/brcm2708/patches-4.4/0018-bcm2835-i2s-Register-PCM-device.patch

@@ -1,7 +1,7 @@
-From fae43fcaa20df1d39c09c98372100bb1dedd6090 Mon Sep 17 00:00:00 2001
+From 7b4481818fe920904457496db40d59dd3d0a83bb Mon Sep 17 00:00:00 2001
 From: Matthias Reichl <[email protected]>
 Date: Sun, 11 Oct 2015 15:35:20 +0200
-Subject: [PATCH 018/170] bcm2835-i2s: Register PCM device
+Subject: [PATCH 018/232] bcm2835-i2s: Register PCM device
 
 Code ported from bcm2708-i2s driver in Raspberry Pi tree.
 

target/linux/brcm2708/patches-4.4/0019-bcm2835-i2s-Enable-MMAP-support-via-a-DT-property.patch

@@ -1,7 +1,7 @@
-From c9e2eeee4889f965a29744718bbff2de409ac649 Mon Sep 17 00:00:00 2001
+From 027ba808e84799c97ae1c64f8424ac8eb7235cc4 Mon Sep 17 00:00:00 2001
 From: Matthias Reichl <[email protected]>
 Date: Sun, 11 Oct 2015 15:55:21 +0200
-Subject: [PATCH 019/170] bcm2835-i2s: Enable MMAP support via a DT property
+Subject: [PATCH 019/232] bcm2835-i2s: Enable MMAP support via a DT property
 
 Code ported from bcm2708-i2s driver in Raspberry Pi tree.
 

target/linux/brcm2708/patches-4.4/0020-dmaengine-bcm2835-Add-slave-dma-support.patch

@@ -1,7 +1,7 @@
-From dc5b926436bccc4efbb1695ec3696b5db6746d3b Mon Sep 17 00:00:00 2001
+From 8a349301238aabb40c9da5ca8c8492b6b8d146f6 Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <[email protected]>
 Date: Thu, 9 Apr 2015 12:34:11 +0200
-Subject: [PATCH 020/170] dmaengine: bcm2835: Add slave dma support
+Subject: [PATCH 020/232] dmaengine: bcm2835: Add slave dma support
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.4/0021-dmaengine-bcm2835-set-residue_granularity-field.patch

@@ -1,7 +1,7 @@
-From 9c6955f3fbfbb46242c63b4640886b9a0d87910a Mon Sep 17 00:00:00 2001
+From 290f55520c62025da992d6be0002fc1e3738cfdb Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <[email protected]>
 Date: Sat, 3 Oct 2015 15:58:59 +0200
-Subject: [PATCH 021/170] dmaengine: bcm2835: set residue_granularity field
+Subject: [PATCH 021/232] dmaengine: bcm2835: set residue_granularity field
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.4/0022-dmaengine-bcm2835-Load-driver-early-and-support-lega.patch

@@ -1,7 +1,7 @@
-From 8da7ee8d9b714dbbac842fb5ae0471b52e0393ec Mon Sep 17 00:00:00 2001
+From 6f56fff39c811953809b011f59c49a2122c4d173 Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <[email protected]>
 Date: Sat, 3 Oct 2015 22:22:55 +0200
-Subject: [PATCH 022/170] dmaengine: bcm2835: Load driver early and support
+Subject: [PATCH 022/232] dmaengine: bcm2835: Load driver early and support
  legacy API
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8

target/linux/brcm2708/patches-4.4/0023-bcm2835-dma-Fix-dreq-not-set-for-slave-transfers.patch

@@ -1,7 +1,7 @@
-From 0f3a30eb7ad7e709fdc6447c70bc3f1d5704eb63 Mon Sep 17 00:00:00 2001
+From df03f00c5e21559185b5a61ea5e8238e10959ab1 Mon Sep 17 00:00:00 2001
 From: Matthias Reichl <[email protected]>
 Date: Sat, 10 Oct 2015 12:29:18 +0200
-Subject: [PATCH 023/170] bcm2835-dma: Fix dreq not set for slave transfers
+Subject: [PATCH 023/232] bcm2835-dma: Fix dreq not set for slave transfers
 
 Set dreq to slave_id if it is not set like in bcm2708-dmaengine.
 ---

target/linux/brcm2708/patches-4.4/0024-bcm2835-dma-Limit-cyclic-transfers-on-lite-channels-.patch

@@ -1,7 +1,7 @@
-From 305370f7caaecafbabb77b630380dbc0c436bb4c Mon Sep 17 00:00:00 2001
+From 052c2005b6ecedc5abad86632f5781adda310aa7 Mon Sep 17 00:00:00 2001
 From: Matthias Reichl <[email protected]>
 Date: Sun, 11 Oct 2015 12:28:30 +0200
-Subject: [PATCH 024/170] bcm2835-dma: Limit cyclic transfers on lite channels
+Subject: [PATCH 024/232] bcm2835-dma: Limit cyclic transfers on lite channels
  to 32k
 
 Transfers larger than 32k cause repeated clicking with I2S soundcards.

target/linux/brcm2708/patches-4.4/0025-bcm2835-Add-support-for-uart1.patch

@@ -1,7 +1,7 @@
-From d801c33b7e2fb0d02ac11b95ea92b7d692286ffc Mon Sep 17 00:00:00 2001
+From a72021ae99021409319d552dad744572b20febfb Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <[email protected]>
 Date: Sat, 15 Aug 2015 20:50:02 +0200
-Subject: [PATCH 025/170] bcm2835: Add support for uart1
+Subject: [PATCH 025/232] bcm2835: Add support for uart1
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.4/0026-firmware-bcm2835-Add-missing-property-tags.patch

@@ -1,7 +1,7 @@
-From 5e90e32b539720ad8c6c8d7ec462378685924f22 Mon Sep 17 00:00:00 2001
+From 4364707caa6d3d9edf84fa8469a04f33e1ba5d76 Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <[email protected]>
 Date: Fri, 26 Jun 2015 14:21:20 +0200
-Subject: [PATCH 026/170] firmware: bcm2835: Add missing property tags
+Subject: [PATCH 026/232] firmware: bcm2835: Add missing property tags
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.4/0027-Main-bcm2708-bcm2709-linux-port.patch

@@ -1,7 +1,7 @@
-From 894f124497e95c9af506af2ed7335857f2e71358 Mon Sep 17 00:00:00 2001
+From cd721670ab8c729d0c62e99a1d173c2575b63282 Mon Sep 17 00:00:00 2001
 From: popcornmix <[email protected]>
 Date: Sun, 12 May 2013 12:24:19 +0100
-Subject: [PATCH 027/170] Main bcm2708/bcm2709 linux port
+Subject: [PATCH 027/232] Main bcm2708/bcm2709 linux port
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.4/0028-squash-include-ARCH_BCM2708-ARCH_BCM2709.patch

@@ -1,7 +1,7 @@
-From 74b2c26348d94949561979a9a3ad61adcac74398 Mon Sep 17 00:00:00 2001
+From 812484cc27980e3351360200478e7044de983f40 Mon Sep 17 00:00:00 2001
 From: popcornmix <[email protected]>
 Date: Wed, 11 Nov 2015 21:01:15 +0000
-Subject: [PATCH 028/170] squash: include ARCH_BCM2708 / ARCH_BCM2709
+Subject: [PATCH 028/232] squash: include ARCH_BCM2708 / ARCH_BCM2709
 
 ---
  drivers/char/hw_random/Kconfig    |  2 +-

target/linux/brcm2708/patches-4.4/0029-Add-dwc_otg-driver.patch

@@ -1,7 +1,7 @@
-From a03df8d0f93365689c718f3d1fb62695e9fffe31 Mon Sep 17 00:00:00 2001
+From 7efc2851a46faa1aceda5f6ec255d0e814812ccf Mon Sep 17 00:00:00 2001
 From: popcornmix <[email protected]>
 Date: Wed, 1 May 2013 19:46:17 +0100
-Subject: [PATCH 029/170] Add dwc_otg driver
+Subject: [PATCH 029/232] Add dwc_otg driver
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.4/0030-bcm2708-framebuffer-driver.patch

@@ -1,7 +1,7 @@
-From 845f985818d3d9ba162ab1102da78b0e39eaedba Mon Sep 17 00:00:00 2001
+From d3b7394edae550f295e185be4651ed43529e7042 Mon Sep 17 00:00:00 2001
 From: popcornmix <[email protected]>
 Date: Wed, 17 Jun 2015 17:06:34 +0100
-Subject: [PATCH 030/170] bcm2708 framebuffer driver
+Subject: [PATCH 030/232] bcm2708 framebuffer driver
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.4/0031-dmaengine-Add-support-for-BCM2708.patch

@@ -1,7 +1,7 @@
-From a35139d316b78606bfdeb0f10656ba6f1729c83f Mon Sep 17 00:00:00 2001
+From 99b7c3cfd05f5898e96d7c44c5970880f2c0cd16 Mon Sep 17 00:00:00 2001
 From: Florian Meier <[email protected]>
 Date: Fri, 22 Nov 2013 14:22:53 +0100
-Subject: [PATCH 031/170] dmaengine: Add support for BCM2708
+Subject: [PATCH 031/232] dmaengine: Add support for BCM2708
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.4/0032-Add-blk_pos-parameter-to-mmc-multi_io_quirk-callback.patch

@@ -1,75 +0,0 @@
-From 462591cf98f15614620667e93b7f8bc0da6e86da Mon Sep 17 00:00:00 2001
-From: Phil Elwell <[email protected]>
-Date: Fri, 17 Apr 2015 19:30:22 +0100
-Subject: [PATCH 032/170] Add blk_pos parameter to mmc multi_io_quirk callback
-
----
- drivers/mmc/card/block.c          | 1 +
- drivers/mmc/host/omap_hsmmc.c     | 4 +++-
- drivers/mmc/host/sh_mobile_sdhi.c | 4 +++-
- drivers/mmc/host/tmio_mmc_pio.c   | 4 +++-
- include/linux/mmc/host.h          | 4 +++-
- 5 files changed, 13 insertions(+), 4 deletions(-)
-
---- a/drivers/mmc/card/block.c
-+++ b/drivers/mmc/card/block.c
-@@ -1518,6 +1518,7 @@ static void mmc_blk_rw_rq_prep(struct mm
- 			brq->data.blocks = card->host->ops->multi_io_quirk(card,
- 						(rq_data_dir(req) == READ) ?
- 						MMC_DATA_READ : MMC_DATA_WRITE,
-+						blk_rq_pos(req),
- 						brq->data.blocks);
- 	}
- 
---- a/drivers/mmc/host/omap_hsmmc.c
-+++ b/drivers/mmc/host/omap_hsmmc.c
-@@ -1832,7 +1832,9 @@ static void omap_hsmmc_conf_bus_power(st
- }
- 
- static int omap_hsmmc_multi_io_quirk(struct mmc_card *card,
--				     unsigned int direction, int blk_size)
-+				     unsigned int direction,
-+				     u32 blk_pos,
-+				     int blk_size)
- {
- 	/* This controller can't do multiblock reads due to hw bugs */
- 	if (direction == MMC_DATA_READ)
---- a/drivers/mmc/host/sh_mobile_sdhi.c
-+++ b/drivers/mmc/host/sh_mobile_sdhi.c
-@@ -170,7 +170,9 @@ static int sh_mobile_sdhi_write16_hook(s
- }
- 
- static int sh_mobile_sdhi_multi_io_quirk(struct mmc_card *card,
--					 unsigned int direction, int blk_size)
-+					 unsigned int direction,
-+					 u32 blk_pos,
-+					 int blk_size)
- {
- 	/*
- 	 * In Renesas controllers, when performing a
---- a/drivers/mmc/host/tmio_mmc_pio.c
-+++ b/drivers/mmc/host/tmio_mmc_pio.c
-@@ -1003,7 +1003,9 @@ static int tmio_mmc_get_ro(struct mmc_ho
- }
- 
- static int tmio_multi_io_quirk(struct mmc_card *card,
--			       unsigned int direction, int blk_size)
-+			       unsigned int direction,
-+			       u32 blk_pos,
-+			       int blk_size)
- {
- 	struct tmio_mmc_host *host = mmc_priv(card->host);
- 
---- a/include/linux/mmc/host.h
-+++ b/include/linux/mmc/host.h
-@@ -143,7 +143,9 @@ struct mmc_host_ops {
- 	 * I/O. Returns the number of supported blocks for the request.
- 	 */
- 	int	(*multi_io_quirk)(struct mmc_card *card,
--				  unsigned int direction, int blk_size);
-+				  unsigned int direction,
-+				  u32 blk_pos,
-+				  int blk_size);
- };
- 
- struct mmc_card;

target/linux/brcm2708/patches-4.4/0033-MMC-added-alternative-MMC-driver.patch → target/linux/brcm2708/patches-4.4/0032-MMC-added-alternative-MMC-driver.patch

@@ -1,7 +1,7 @@
-From 3d0ca77d187abbbde572f4a73b1f864ffb8b5d8a Mon Sep 17 00:00:00 2001
+From 65c8aadfd88010efb2d2a2821fea7aac978b6c78 Mon Sep 17 00:00:00 2001
 From: gellert <[email protected]>
 Date: Fri, 15 Aug 2014 16:35:06 +0100
-Subject: [PATCH 033/170] MMC: added alternative MMC driver
+Subject: [PATCH 032/232] MMC: added alternative MMC driver
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.4/0034-Adding-bcm2835-sdhost-driver-and-an-overlay-to-enabl.patch → target/linux/brcm2708/patches-4.4/0033-Adding-bcm2835-sdhost-driver-and-an-overlay-to-enabl.patch

@@ -1,7 +1,7 @@
-From 756bf8b8f081be45e16d4d58d3fbe2ca073df298 Mon Sep 17 00:00:00 2001
+From c58bec0d84082837415562c6567396e9e5ba62f7 Mon Sep 17 00:00:00 2001
 From: Phil Elwell <[email protected]>
 Date: Wed, 25 Mar 2015 17:49:47 +0000
-Subject: [PATCH 034/170] Adding bcm2835-sdhost driver, and an overlay to
+Subject: [PATCH 033/232] Adding bcm2835-sdhost driver, and an overlay to
  enable it
 
 BCM2835 has two SD card interfaces. This driver uses the other one.

target/linux/brcm2708/patches-4.4/0035-cma-Add-vc_cma-driver-to-enable-use-of-CMA.patch → target/linux/brcm2708/patches-4.4/0034-cma-Add-vc_cma-driver-to-enable-use-of-CMA.patch

@@ -1,7 +1,7 @@
-From 8dbb0430386b772f636f474ed45496076d135428 Mon Sep 17 00:00:00 2001
+From 36d8db53953365eecdf56695944e9f9919634de0 Mon Sep 17 00:00:00 2001
 From: popcornmix <[email protected]>
 Date: Wed, 3 Jul 2013 00:31:47 +0100
-Subject: [PATCH 035/170] cma: Add vc_cma driver to enable use of CMA
+Subject: [PATCH 034/232] cma: Add vc_cma driver to enable use of CMA
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.4/0036-bcm2708-alsa-sound-driver.patch → target/linux/brcm2708/patches-4.4/0035-bcm2708-alsa-sound-driver.patch

@@ -1,7 +1,7 @@
-From 1e8eb30b259278ea7ab9d14c66d2fab5f580f73c Mon Sep 17 00:00:00 2001
+From 2dd634f97c4fb77d9e81be289a8da29c390a0309 Mon Sep 17 00:00:00 2001
 From: popcornmix <[email protected]>
 Date: Mon, 26 Mar 2012 22:15:50 +0100
-Subject: [PATCH 036/170] bcm2708: alsa sound driver
+Subject: [PATCH 035/232] bcm2708: alsa sound driver
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.4/0037-bcm2708-vchiq-driver.patch → target/linux/brcm2708/patches-4.4/0036-bcm2708-vchiq-driver.patch

@@ -1,7 +1,7 @@
-From 20c0f57db9cca65943519bd404b3e346958f4544 Mon Sep 17 00:00:00 2001
+From 112360f76c91c892f1a29825eb2807bbf86ac67d Mon Sep 17 00:00:00 2001
 From: popcornmix <[email protected]>
 Date: Tue, 2 Jul 2013 23:42:01 +0100
-Subject: [PATCH 037/170] bcm2708 vchiq driver
+Subject: [PATCH 036/232] bcm2708 vchiq driver
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.4/0038-vc_mem-Add-vc_mem-driver.patch → target/linux/brcm2708/patches-4.4/0037-vc_mem-Add-vc_mem-driver.patch

@@ -1,7 +1,7 @@
-From 2cabfc660c80dd79f24a8323b3913b5060ebf750 Mon Sep 17 00:00:00 2001
+From b0acaf43055bacef7918c835517ff6ea7da26e83 Mon Sep 17 00:00:00 2001
 From: popcornmix <[email protected]>
 Date: Wed, 17 Jun 2015 16:07:06 +0100
-Subject: [PATCH 038/170] vc_mem: Add vc_mem driver
+Subject: [PATCH 037/232] vc_mem: Add vc_mem driver
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.4/0039-vcsm-VideoCore-shared-memory-service-for-BCM2835.patch → target/linux/brcm2708/patches-4.4/0038-vcsm-VideoCore-shared-memory-service-for-BCM2835.patch

@@ -1,7 +1,7 @@
-From 01574b9e0f1086399e7f796cc1dc8fcadabf4a46 Mon Sep 17 00:00:00 2001
+From 5f05accd033e4b032f64717a0276d7174f697919 Mon Sep 17 00:00:00 2001
 From: Tim Gover <[email protected]>
 Date: Tue, 22 Jul 2014 15:41:04 +0100
-Subject: [PATCH 039/170] vcsm: VideoCore shared memory service for BCM2835
+Subject: [PATCH 038/232] vcsm: VideoCore shared memory service for BCM2835
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.4/0040-Add-dev-gpiomem-device-for-rootless-user-GPIO-access.patch → target/linux/brcm2708/patches-4.4/0039-Add-dev-gpiomem-device-for-rootless-user-GPIO-access.patch

@@ -1,7 +1,7 @@
-From 832077a0f61e44a9259b153f60eb233fa723c2a9 Mon Sep 17 00:00:00 2001
+From 1ee3b49a62efe1416a6b40fb5c6032288f3d2b08 Mon Sep 17 00:00:00 2001
 From: Luke Wren <[email protected]>
 Date: Fri, 21 Aug 2015 23:14:48 +0100
-Subject: [PATCH 040/170] Add /dev/gpiomem device for rootless user GPIO access
+Subject: [PATCH 039/232] Add /dev/gpiomem device for rootless user GPIO access
 
 Signed-off-by: Luke Wren <[email protected]>
 

target/linux/brcm2708/patches-4.4/0041-Add-SMI-driver.patch → target/linux/brcm2708/patches-4.4/0040-Add-SMI-driver.patch

@@ -1,7 +1,7 @@
-From 6609b15c34f26f34b4b49e7726693a1de321078c Mon Sep 17 00:00:00 2001
+From e19c303e7d54d986e0bd3e47107a83e30329c1d0 Mon Sep 17 00:00:00 2001
 From: Luke Wren <[email protected]>
 Date: Sat, 5 Sep 2015 01:14:45 +0100
-Subject: [PATCH 041/170] Add SMI driver
+Subject: [PATCH 040/232] Add SMI driver
 
 Signed-off-by: Luke Wren <[email protected]>
 ---

target/linux/brcm2708/patches-4.4/0042-Add-SMI-NAND-driver.patch → target/linux/brcm2708/patches-4.4/0041-Add-SMI-NAND-driver.patch

@@ -1,7 +1,7 @@
-From f4d44b2c447c401791645627e88d0ef9830c1239 Mon Sep 17 00:00:00 2001
+From c0fe401b61ae4d002f6fc84438ce69c5917c580a Mon Sep 17 00:00:00 2001
 From: Luke Wren <[email protected]>
 Date: Sat, 5 Sep 2015 01:16:10 +0100
-Subject: [PATCH 042/170] Add SMI NAND driver
+Subject: [PATCH 041/232] Add SMI NAND driver
 
 Signed-off-by: Luke Wren <[email protected]>
 ---

target/linux/brcm2708/patches-4.4/0043-lirc-added-support-for-RaspberryPi-GPIO.patch → target/linux/brcm2708/patches-4.4/0042-lirc-added-support-for-RaspberryPi-GPIO.patch

@@ -1,7 +1,7 @@
-From 2faad8f6644fa53418c5a7b80da8d5400b72df3f Mon Sep 17 00:00:00 2001
+From 0bc00c67aea43098c7b066e7b123379b260cc7de Mon Sep 17 00:00:00 2001
 From: Aron Szabo <[email protected]>
 Date: Sat, 16 Jun 2012 12:15:55 +0200
-Subject: [PATCH 043/170] lirc: added support for RaspberryPi GPIO
+Subject: [PATCH 042/232] lirc: added support for RaspberryPi GPIO
 
 lirc_rpi: Use read_current_timer to determine transmitter delay. Thanks to jjmz and others
 See: https://github.com/raspberrypi/linux/issues/525

target/linux/brcm2708/patches-4.4/0044-Add-cpufreq-driver.patch → target/linux/brcm2708/patches-4.4/0043-Add-cpufreq-driver.patch

@@ -1,7 +1,7 @@
-From 3c7ea37319a4974cbf6b89a84c109a53f4d6b408 Mon Sep 17 00:00:00 2001
+From 007ef35b2cf5d8a0197e81e712b38fb72cebae2e Mon Sep 17 00:00:00 2001
 From: popcornmix <[email protected]>
 Date: Wed, 3 Jul 2013 00:49:20 +0100
-Subject: [PATCH 044/170] Add cpufreq driver
+Subject: [PATCH 043/232] Add cpufreq driver
 
 Signed-off-by: popcornmix <[email protected]>
 ---

target/linux/brcm2708/patches-4.4/0045-Added-hwmon-thermal-driver-for-reporting-core-temper.patch → target/linux/brcm2708/patches-4.4/0044-Added-hwmon-thermal-driver-for-reporting-core-temper.patch

@@ -1,7 +1,7 @@
-From 776e87ffc8b137ea465e7b0076e56cd71d9c56d1 Mon Sep 17 00:00:00 2001
+From 9f251fdbaaf3bd895c2901413748679d68a0c644 Mon Sep 17 00:00:00 2001
 From: popcornmix <[email protected]>
 Date: Tue, 26 Mar 2013 19:24:24 +0000
-Subject: [PATCH 045/170] Added hwmon/thermal driver for reporting core
+Subject: [PATCH 044/232] Added hwmon/thermal driver for reporting core
  temperature. Thanks Dorian
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8

target/linux/brcm2708/patches-4.4/0046-Add-Chris-Boot-s-i2c-driver.patch → target/linux/brcm2708/patches-4.4/0045-Add-Chris-Boot-s-i2c-driver.patch

@@ -1,7 +1,7 @@
-From 72181304010d3aa74cd2b98db592554a541ce4c2 Mon Sep 17 00:00:00 2001
+From 28a4399bf03eeb3ec5b7b56c9445b296e1427665 Mon Sep 17 00:00:00 2001
 From: popcornmix <[email protected]>
 Date: Wed, 17 Jun 2015 15:44:08 +0100
-Subject: [PATCH 046/170] Add Chris Boot's i2c driver
+Subject: [PATCH 045/232] Add Chris Boot's i2c driver
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.4/0047-char-broadcom-Add-vcio-module.patch → target/linux/brcm2708/patches-4.4/0046-char-broadcom-Add-vcio-module.patch

@@ -1,7 +1,7 @@
-From abcf04d54ccb3d0897b1f7a95ddf9d9ccf63dc76 Mon Sep 17 00:00:00 2001
+From 75804edaed6c45d813dcee866d39445130d82539 Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <[email protected]>
 Date: Fri, 26 Jun 2015 14:27:06 +0200
-Subject: [PATCH 047/170] char: broadcom: Add vcio module
+Subject: [PATCH 046/232] char: broadcom: Add vcio module
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.4/0048-firmware-bcm2835-Support-ARCH_BCM270x.patch → target/linux/brcm2708/patches-4.4/0047-firmware-bcm2835-Support-ARCH_BCM270x.patch

@@ -1,7 +1,7 @@
-From a205e934b63b6bf3f5f74bc39974ec6ff09df596 Mon Sep 17 00:00:00 2001
+From 80b7c5e2cc3d633b3d3a1afbdb537e2ccfe906c7 Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <[email protected]>
 Date: Fri, 26 Jun 2015 14:25:01 +0200
-Subject: [PATCH 048/170] firmware: bcm2835: Support ARCH_BCM270x
+Subject: [PATCH 047/232] firmware: bcm2835: Support ARCH_BCM270x
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.4/0049-bcm2835-add-v4l2-camera-device.patch → target/linux/brcm2708/patches-4.4/0048-bcm2835-add-v4l2-camera-device.patch

@@ -1,7 +1,7 @@
-From 4d74ee3d433df319ae3fc36bd16fd96b4bbff865 Mon Sep 17 00:00:00 2001
+From e15fddd4332bd3a762d0feef48ff2b5e3df10af0 Mon Sep 17 00:00:00 2001
 From: Vincent Sanders <[email protected]>
 Date: Wed, 30 Jan 2013 12:45:18 +0000
-Subject: [PATCH 049/170] bcm2835: add v4l2 camera device
+Subject: [PATCH 048/232] bcm2835: add v4l2 camera device
 
 - Supports raw YUV capture, preview, JPEG and H264.
 - Uses videobuf2 for data transfer, using dma_buf.

target/linux/brcm2708/patches-4.4/0050-scripts-Add-mkknlimg-and-knlinfo-scripts-from-tools-.patch → target/linux/brcm2708/patches-4.4/0049-scripts-Add-mkknlimg-and-knlinfo-scripts-from-tools-.patch

@@ -1,7 +1,7 @@
-From 03435989bbadbd333a810644c8246dd7eb0bad07 Mon Sep 17 00:00:00 2001
+From 91e833ab0b220bb0bb810bb9605b0a03cd76baa8 Mon Sep 17 00:00:00 2001
 From: Phil Elwell <[email protected]>
 Date: Mon, 11 May 2015 09:00:42 +0100
-Subject: [PATCH 050/170] scripts: Add mkknlimg and knlinfo scripts from tools
+Subject: [PATCH 049/232] scripts: Add mkknlimg and knlinfo scripts from tools
  repo
 
 The Raspberry Pi firmware looks for a trailer on the kernel image to

target/linux/brcm2708/patches-4.4/0051-fdt-Add-support-for-the-CONFIG_CMDLINE_EXTEND-option.patch → target/linux/brcm2708/patches-4.4/0050-fdt-Add-support-for-the-CONFIG_CMDLINE_EXTEND-option.patch

@@ -1,7 +1,7 @@
-From a251bf4a37d8fd468bc3ff853bcebe8ee452a31e Mon Sep 17 00:00:00 2001
+From 918b9e451bbaebb775725a292fd3b6e3d4cf804f Mon Sep 17 00:00:00 2001
 From: Phil Elwell <[email protected]>
 Date: Fri, 5 Dec 2014 17:26:26 +0000
-Subject: [PATCH 051/170] fdt: Add support for the CONFIG_CMDLINE_EXTEND option
+Subject: [PATCH 050/232] fdt: Add support for the CONFIG_CMDLINE_EXTEND option
 
 ---
  drivers/of/fdt.c | 29 ++++++++++++++++++++++++-----

target/linux/brcm2708/patches-4.4/0052-BCM2708-Add-core-Device-Tree-support.patch → target/linux/brcm2708/patches-4.4/0051-BCM2708-Add-core-Device-Tree-support.patch

@@ -1,7 +1,7 @@
-From 0112c4ce9db6cdc53af67dc7634966c3594de7ff Mon Sep 17 00:00:00 2001
+From d1fdaf68df66e82bea1081b490ebeea414d69203 Mon Sep 17 00:00:00 2001
 From: notro <[email protected]>
 Date: Wed, 9 Jul 2014 14:46:08 +0200
-Subject: [PATCH 052/170] BCM2708: Add core Device Tree support
+Subject: [PATCH 051/232] BCM2708: Add core Device Tree support
 
 Add the bare minimum needed to boot BCM2708 from a Device Tree.
 
@@ -1622,7 +1622,7 @@ BCM270X_DT: Use clk_core for I2C interfaces
 +                                 (default "off")
 +
 +        random                   Set to "on" to enable the hardware random
-+                                 number generator (default "off")
++                                 number generator (default "on")
 +
 +        uart0                    Set to "off" to disable uart0 (default "on")
 +

target/linux/brcm2708/patches-4.4/0053-bcm2835-Match-with-BCM2708-Device-Trees.patch → target/linux/brcm2708/patches-4.4/0052-bcm2835-Match-with-BCM2708-Device-Trees.patch

@@ -1,7 +1,7 @@
-From 23eabf2220f0f748df3e88a35e55a82c53242b4a Mon Sep 17 00:00:00 2001
+From da7cdef4979282624e0e7527c3c8334a59f39676 Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <[email protected]>
 Date: Sat, 15 Aug 2015 20:47:07 +0200
-Subject: [PATCH 053/170] bcm2835: Match with BCM2708 Device Trees
+Subject: [PATCH 052/232] bcm2835: Match with BCM2708 Device Trees
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.4/0054-fbdev-add-FBIOCOPYAREA-ioctl.patch → target/linux/brcm2708/patches-4.4/0053-fbdev-add-FBIOCOPYAREA-ioctl.patch

@@ -1,7 +1,7 @@
-From f978fb3b816681159b6cc97104954dea31488add Mon Sep 17 00:00:00 2001
+From b28366cb5b514e5c59586f9a5509d3afff5337d5 Mon Sep 17 00:00:00 2001
 From: Siarhei Siamashka <[email protected]>
 Date: Mon, 17 Jun 2013 13:32:11 +0300
-Subject: [PATCH 054/170] fbdev: add FBIOCOPYAREA ioctl
+Subject: [PATCH 053/232] fbdev: add FBIOCOPYAREA ioctl
 
 Based on the patch authored by Ali Gholami Rudi at
     https://lkml.org/lkml/2009/7/13/153

target/linux/brcm2708/patches-4.4/0058-Speed-up-console-framebuffer-imageblit-function.patch → target/linux/brcm2708/patches-4.4/0057-Speed-up-console-framebuffer-imageblit-function.patch

@@ -1,7 +1,7 @@
-From 53bcd6e5a43a353508c7aff48abcdcaae1b35ca8 Mon Sep 17 00:00:00 2001
+From dbf03b37592b79d891cb796fda13d8495a6a5234 Mon Sep 17 00:00:00 2001
 From: Harm Hanemaaijer <[email protected]>
 Date: Thu, 20 Jun 2013 20:21:39 +0200
-Subject: [PATCH 058/170] Speed up console framebuffer imageblit function
+Subject: [PATCH 057/232] Speed up console framebuffer imageblit function
 
 Especially on platforms with a slower CPU but a relatively high
 framebuffer fill bandwidth, like current ARM devices, the existing

target/linux/brcm2708/patches-4.4/0059-Allow-mac-address-to-be-set-in-smsc95xx.patch → target/linux/brcm2708/patches-4.4/0058-Allow-mac-address-to-be-set-in-smsc95xx.patch

@@ -1,7 +1,7 @@
-From 6c0a9150827dc58fac38c8e787c050626325842e Mon Sep 17 00:00:00 2001
+From cf63ba6ba21e8a1d62b1eb4917af42d6bcfa4445 Mon Sep 17 00:00:00 2001
 From: popcornmix <[email protected]>
 Date: Tue, 26 Mar 2013 17:26:38 +0000
-Subject: [PATCH 059/170] Allow mac address to be set in smsc95xx
+Subject: [PATCH 058/232] Allow mac address to be set in smsc95xx
 
 Signed-off-by: popcornmix <[email protected]>
 ---

target/linux/brcm2708/patches-4.4/0060-enabling-the-realtime-clock-1-wire-chip-DS1307-and-1.patch → target/linux/brcm2708/patches-4.4/0059-enabling-the-realtime-clock-1-wire-chip-DS1307-and-1.patch

@@ -1,7 +1,7 @@
-From e172d31b8402f13aed5679cd7023f0c0935aab05 Mon Sep 17 00:00:00 2001
+From 20f0537c77ac3ef4e446bd0013c37ddd3af3936b Mon Sep 17 00:00:00 2001
 From: popcornmix <[email protected]>
 Date: Wed, 8 May 2013 11:46:50 +0100
-Subject: [PATCH 060/170] enabling the realtime clock 1-wire chip DS1307 and
+Subject: [PATCH 059/232] enabling the realtime clock 1-wire chip DS1307 and
  1-wire on GPIO4 (as a module)
 
 1-wire: Add support for configuring pin for w1-gpio kernel module

target/linux/brcm2708/patches-4.4/0061-Added-Device-IDs-for-August-DVB-T-205.patch → target/linux/brcm2708/patches-4.4/0060-Added-Device-IDs-for-August-DVB-T-205.patch

@@ -1,7 +1,7 @@
-From 78c49b30c0dcc8b73f383f71b89719798fc89b72 Mon Sep 17 00:00:00 2001
+From fbd8454a22771ed12e1905a52934a6a871bc492e Mon Sep 17 00:00:00 2001
 From: popcornmix <[email protected]>
 Date: Wed, 3 Jul 2013 00:54:08 +0100
-Subject: [PATCH 061/170] Added Device IDs for August DVB-T 205
+Subject: [PATCH 060/232] Added Device IDs for August DVB-T 205
 
 ---
  drivers/media/usb/dvb-usb-v2/rtl28xxu.c | 4 ++++

target/linux/brcm2708/patches-4.4/0062-config-Enable-CONFIG_MEMCG-but-leave-it-disabled-due.patch → target/linux/brcm2708/patches-4.4/0061-config-Enable-CONFIG_MEMCG-but-leave-it-disabled-due.patch

@@ -1,7 +1,7 @@
-From d0f48fe7aab3e4036fd55b491a9be94ea24f377d Mon Sep 17 00:00:00 2001
+From 6f8e2aeb77e4437eab3a46d74a1a2b9533812c81 Mon Sep 17 00:00:00 2001
 From: popcornmix <[email protected]>
 Date: Wed, 18 Dec 2013 22:16:19 +0000
-Subject: [PATCH 062/170] config: Enable CONFIG_MEMCG, but leave it disabled
+Subject: [PATCH 061/232] config: Enable CONFIG_MEMCG, but leave it disabled
  (due to memory cost). Enable with cgroup_enable=memory.
 
 ---

target/linux/brcm2708/patches-4.4/0063-ASoC-Add-support-for-PCM5102A-codec.patch → target/linux/brcm2708/patches-4.4/0062-ASoC-Add-support-for-PCM5102A-codec.patch

@@ -1,7 +1,7 @@
-From 8d35b3a72d3580ad6f5bc5835bfe13b00cce6086 Mon Sep 17 00:00:00 2001
+From b507ac15b579d88a09bf915f2f3ca8de7f1e4bf7 Mon Sep 17 00:00:00 2001
 From: Florian Meier <[email protected]>
 Date: Fri, 22 Nov 2013 14:59:51 +0100
-Subject: [PATCH 063/170] ASoC: Add support for PCM5102A codec
+Subject: [PATCH 062/232] ASoC: Add support for PCM5102A codec
 
 Some definitions to support the PCM5102A codec
 by Texas Instruments.

target/linux/brcm2708/patches-4.4/0064-ASoC-Add-support-for-HifiBerry-DAC.patch → target/linux/brcm2708/patches-4.4/0063-ASoC-Add-support-for-HifiBerry-DAC.patch

@@ -1,7 +1,7 @@
-From 9ced0e86593de2214ff8a81f71c802d7e7301b05 Mon Sep 17 00:00:00 2001
+From 9f5e88b201753c68a90fa45a269aa82febc58fc6 Mon Sep 17 00:00:00 2001
 From: Florian Meier <[email protected]>
 Date: Fri, 22 Nov 2013 19:19:08 +0100
-Subject: [PATCH 064/170] ASoC: Add support for HifiBerry DAC
+Subject: [PATCH 063/232] ASoC: Add support for HifiBerry DAC
 
 This adds a machine driver for the HifiBerry DAC.
 It is a sound card that can

target/linux/brcm2708/patches-4.4/0065-ASoC-Add-support-for-Rpi-DAC.patch → target/linux/brcm2708/patches-4.4/0064-ASoC-Add-support-for-Rpi-DAC.patch

@@ -1,7 +1,7 @@
-From f16a654f57b024d44fe58d62b660e01de6a7811a Mon Sep 17 00:00:00 2001
+From 95bf71f0e826b97bad98f350e2fee6ba515a38cf Mon Sep 17 00:00:00 2001
 From: Florian Meier <[email protected]>
 Date: Fri, 22 Nov 2013 19:21:34 +0100
-Subject: [PATCH 065/170] ASoC: Add support for Rpi-DAC
+Subject: [PATCH 064/232] ASoC: Add support for Rpi-DAC
 
 ---
  sound/soc/bcm/Kconfig       |   7 +++

target/linux/brcm2708/patches-4.4/0066-ASoC-wm8804-Implement-MCLK-configuration-options-add.patch → target/linux/brcm2708/patches-4.4/0065-ASoC-wm8804-Implement-MCLK-configuration-options-add.patch

@@ -1,7 +1,7 @@
-From dbdeca565b0850da182d3bd0b3ed41f667ca8a45 Mon Sep 17 00:00:00 2001
+From 455d188d2a22ced675219587856c0dc66efc7256 Mon Sep 17 00:00:00 2001
 From: Daniel Matuschek <[email protected]>
 Date: Wed, 15 Jan 2014 21:41:23 +0100
-Subject: [PATCH 066/170] ASoC: wm8804: Implement MCLK configuration options,
+Subject: [PATCH 065/232] ASoC: wm8804: Implement MCLK configuration options,
  add 32bit support WM8804 can run with PLL frequencies of 256xfs and 128xfs
  for most sample rates. At 192kHz only 128xfs is supported. The existing
  driver selects 128xfs automatically for some lower samples rates. By using an

target/linux/brcm2708/patches-4.4/0067-ASoC-BCM-Add-support-for-HiFiBerry-Digi.-Driver-is-b.patch → target/linux/brcm2708/patches-4.4/0066-ASoC-BCM-Add-support-for-HiFiBerry-Digi.-Driver-is-b.patch

@@ -1,7 +1,7 @@
-From 0c2e64d3eda229c2f52ce6ed9d0b1c1572dd9b19 Mon Sep 17 00:00:00 2001
+From 442de6ae737fbd27bcf2fde8be857beccc59fd1f Mon Sep 17 00:00:00 2001
 From: Daniel Matuschek <[email protected]>
 Date: Wed, 15 Jan 2014 21:42:08 +0100
-Subject: [PATCH 067/170] ASoC: BCM:Add support for HiFiBerry Digi. Driver is
+Subject: [PATCH 066/232] ASoC: BCM:Add support for HiFiBerry Digi. Driver is
  based on the patched WM8804 driver.
 
 Signed-off-by: Daniel Matuschek <[email protected]>

target/linux/brcm2708/patches-4.4/0068-ASoC-wm8804-Set-idle_bias_off-to-false-Idle-bias-has.patch → target/linux/brcm2708/patches-4.4/0067-ASoC-wm8804-Set-idle_bias_off-to-false-Idle-bias-has.patch

@@ -1,7 +1,7 @@
-From f2789622ff7c1297e28f38bb198f5fd24b4602ef Mon Sep 17 00:00:00 2001
+From 836e7d5d46f17115b728986e3077c78c211a7678 Mon Sep 17 00:00:00 2001
 From: Daniel Matuschek <[email protected]>
 Date: Thu, 16 Jan 2014 07:36:35 +0100
-Subject: [PATCH 068/170] ASoC: wm8804: Set idle_bias_off to false Idle bias
+Subject: [PATCH 067/232] ASoC: wm8804: Set idle_bias_off to false Idle bias
  has been change to remove warning on driver startup
 
 Signed-off-by: Daniel Matuschek <[email protected]>

target/linux/brcm2708/patches-4.4/0069-Add-IQaudIO-Sound-Card-support-for-Raspberry-Pi.patch → target/linux/brcm2708/patches-4.4/0068-Add-IQaudIO-Sound-Card-support-for-Raspberry-Pi.patch

@@ -1,7 +1,7 @@
-From 80fa31f923b4967bc86be20c5af780ef284fc972 Mon Sep 17 00:00:00 2001
+From 7ab81054051a41288e4aa2bb21d4740e0d78a4ac Mon Sep 17 00:00:00 2001
 From: Gordon Garrity <[email protected]>
 Date: Sat, 8 Mar 2014 16:56:57 +0000
-Subject: [PATCH 069/170] Add IQaudIO Sound Card support for Raspberry Pi
+Subject: [PATCH 068/232] Add IQaudIO Sound Card support for Raspberry Pi
 
 Set a limit of 0dB on Digital Volume Control
 

target/linux/brcm2708/patches-4.4/0070-hid-Reduce-default-mouse-polling-interval-to-60Hz.patch → target/linux/brcm2708/patches-4.4/0069-hid-Reduce-default-mouse-polling-interval-to-60Hz.patch

@@ -1,7 +1,7 @@
-From b15f112ddaf2cd20a8f999ac823ddb51d7d513b9 Mon Sep 17 00:00:00 2001
+From efb984b47e685c966a3b55874de2c1fb5b0b1140 Mon Sep 17 00:00:00 2001
 From: popcornmix <[email protected]>
 Date: Mon, 14 Jul 2014 22:02:09 +0100
-Subject: [PATCH 070/170] hid: Reduce default mouse polling interval to 60Hz
+Subject: [PATCH 069/232] hid: Reduce default mouse polling interval to 60Hz
 
 Reduces overhead when using X
 ---

target/linux/brcm2708/patches-4.4/0071-Added-support-for-HiFiBerry-DAC.patch → target/linux/brcm2708/patches-4.4/0070-Added-support-for-HiFiBerry-DAC.patch

@@ -1,7 +1,7 @@
-From debd3d30b1127328b5a1e444bd1550cb45c50362 Mon Sep 17 00:00:00 2001
+From 72a92f2e40881dcb46e50021c5c5fe2c20d8c461 Mon Sep 17 00:00:00 2001
 From: Daniel Matuschek <[email protected]>
 Date: Mon, 4 Aug 2014 10:06:56 +0200
-Subject: [PATCH 071/170] Added support for HiFiBerry DAC+
+Subject: [PATCH 070/232] Added support for HiFiBerry DAC+
 
 The driver is based on the HiFiBerry DAC driver. However HiFiBerry DAC+ uses
 a different codec chip (PCM5122), therefore a new driver is necessary.

target/linux/brcm2708/patches-4.4/0072-Added-driver-for-HiFiBerry-Amp-amplifier-add-on-boar.patch → target/linux/brcm2708/patches-4.4/0071-Added-driver-for-HiFiBerry-Amp-amplifier-add-on-boar.patch

@@ -1,7 +1,7 @@
-From 9c6f0b1812313d39afeefd700b7f9df9a82a47cd Mon Sep 17 00:00:00 2001
+From f25572414689152e6208e5ca921185b1db536b24 Mon Sep 17 00:00:00 2001
 From: Daniel Matuschek <[email protected]>
 Date: Mon, 4 Aug 2014 11:09:58 +0200
-Subject: [PATCH 072/170] Added driver for HiFiBerry Amp amplifier add-on board
+Subject: [PATCH 071/232] Added driver for HiFiBerry Amp amplifier add-on board
 
 The driver contains a low-level hardware driver for the TAS5713 and the
 drivers for the Raspberry Pi I2S subsystem.

target/linux/brcm2708/patches-4.4/0073-Update-ds1307-driver-for-device-tree-support.patch → target/linux/brcm2708/patches-4.4/0072-Update-ds1307-driver-for-device-tree-support.patch

@@ -1,7 +1,7 @@
-From 21d08f232ffc350b2930f761f3da26f9867b1d4d Mon Sep 17 00:00:00 2001
+From d0bfff366e12c9b401ac7eafabab7337e82549ea Mon Sep 17 00:00:00 2001
 From: Ryan Coe <[email protected]>
 Date: Sat, 31 Jan 2015 18:25:49 -0700
-Subject: [PATCH 073/170] Update ds1307 driver for device-tree support
+Subject: [PATCH 072/232] Update ds1307 driver for device-tree support
 
 Signed-off-by: Ryan Coe <[email protected]>
 ---

target/linux/brcm2708/patches-4.4/0074-BCM270x_DT-Add-pwr_led-and-the-required-input-trigge.patch → target/linux/brcm2708/patches-4.4/0073-BCM270x_DT-Add-pwr_led-and-the-required-input-trigge.patch

@@ -1,7 +1,7 @@
-From a2b52a3af1314e2b691d9518afb3051193758671 Mon Sep 17 00:00:00 2001
+From 96aac93fdea2caa77d4746aa001c2d792b314112 Mon Sep 17 00:00:00 2001
 From: Phil Elwell <[email protected]>
 Date: Fri, 6 Feb 2015 13:50:57 +0000
-Subject: [PATCH 074/170] BCM270x_DT: Add pwr_led, and the required "input"
+Subject: [PATCH 073/232] BCM270x_DT: Add pwr_led, and the required "input"
  trigger
 
 The "input" trigger makes the associated GPIO an input.  This is to support

target/linux/brcm2708/patches-4.4/0075-enc28j60-Add-device-tree-compatible-string-and-an-ov.patch → target/linux/brcm2708/patches-4.4/0074-enc28j60-Add-device-tree-compatible-string-and-an-ov.patch

@@ -1,7 +1,7 @@
-From 12ad9b7c670220b1b8b80ebf507651d106cb28c0 Mon Sep 17 00:00:00 2001
+From d3a1dcc1ce28233707c395b11cd2403ba22aebda Mon Sep 17 00:00:00 2001
 From: Phil Elwell <[email protected]>
 Date: Fri, 27 Feb 2015 15:10:24 +0000
-Subject: [PATCH 075/170] enc28j60: Add device tree compatible string and an
+Subject: [PATCH 074/232] enc28j60: Add device tree compatible string and an
  overlay
 
 ---

target/linux/brcm2708/patches-4.4/0076-Add-driver-for-rpi-proto.patch → target/linux/brcm2708/patches-4.4/0075-Add-driver-for-rpi-proto.patch

@@ -1,7 +1,7 @@
-From 660d2fba0483aafc4a1ce678016620c0871bb759 Mon Sep 17 00:00:00 2001
+From a058f705de89cb54126d9bf8d099acb7ececb6e7 Mon Sep 17 00:00:00 2001
 From: Waldemar Brodkorb <[email protected]>
 Date: Wed, 25 Mar 2015 09:26:17 +0100
-Subject: [PATCH 076/170] Add driver for rpi-proto
+Subject: [PATCH 075/232] Add driver for rpi-proto
 
 Forward port of 3.10.x driver from https://github.com/koalo
 We are using a custom board and would like to use rpi 3.18.x

target/linux/brcm2708/patches-4.4/0077-config-Add-default-configs.patch → target/linux/brcm2708/patches-4.4/0076-config-Add-default-configs.patch

@@ -1,7 +1,7 @@
-From e2af169e60b4ebd710e733996d57ad86264bae27 Mon Sep 17 00:00:00 2001
+From 78cf26e64b4ce0c4567829c42990a89ab59a6553 Mon Sep 17 00:00:00 2001
 From: popcornmix <[email protected]>
 Date: Mon, 13 Apr 2015 17:16:29 +0100
-Subject: [PATCH 077/170] config: Add default configs
+Subject: [PATCH 076/232] config: Add default configs
 
 ---
  arch/arm/configs/bcm2709_defconfig | 1254 +++++++++++++++++++++++++++++++++++

target/linux/brcm2708/patches-4.4/0078-bcm2835-bcm2835_defconfig.patch → target/linux/brcm2708/patches-4.4/0077-bcm2835-bcm2835_defconfig.patch

@@ -1,7 +1,7 @@
-From e5292198fc83805a9f4751fddeb802f69c0270f0 Mon Sep 17 00:00:00 2001
+From 0ee42e134a9a28fd825e1390634113108c0eebc0 Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <[email protected]>
 Date: Wed, 29 Apr 2015 17:24:02 +0200
-Subject: [PATCH 078/170] bcm2835: bcm2835_defconfig
+Subject: [PATCH 077/232] bcm2835: bcm2835_defconfig
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit

target/linux/brcm2708/patches-4.4/0079-rpi-ft5406-Add-touchscreen-driver-for-pi-LCD-display.patch → target/linux/brcm2708/patches-4.4/0078-rpi-ft5406-Add-touchscreen-driver-for-pi-LCD-display.patch

@@ -1,7 +1,7 @@
-From 6fb12ee15eb9b0f5b6fea66c861a9db8ec6671ed Mon Sep 17 00:00:00 2001
+From d46fbf49354f8c82cc216d56d9addad113703c50 Mon Sep 17 00:00:00 2001
 From: Gordon Hollingworth <[email protected]>
 Date: Tue, 12 May 2015 14:47:56 +0100
-Subject: [PATCH 079/170] rpi-ft5406: Add touchscreen driver for pi LCD display
+Subject: [PATCH 078/232] rpi-ft5406: Add touchscreen driver for pi LCD display
 
 Fix driver detection failure Check that the buffer response is non-zero meaning the touchscreen was detected
 

target/linux/brcm2708/patches-4.4/0080-Improve-__copy_to_user-and-__copy_from_user-performa.patch → target/linux/brcm2708/patches-4.4/0079-Improve-__copy_to_user-and-__copy_from_user-performa.patch

@@ -1,7 +1,7 @@
-From b57a6269e03fe055f78ab50add6e2c68d43254e2 Mon Sep 17 00:00:00 2001
+From 4514b02d95de8be6d6298ee20a5204815cf669d0 Mon Sep 17 00:00:00 2001
 From: Phil Elwell <[email protected]>
 Date: Mon, 13 Oct 2014 11:47:53 +0100
-Subject: [PATCH 080/170] Improve __copy_to_user and __copy_from_user
+Subject: [PATCH 079/232] Improve __copy_to_user and __copy_from_user
  performance
 
 Provide a __copy_from_user that uses memcpy. On BCM2708, use

target/linux/brcm2708/patches-4.4/0081-gpio-poweroff-Allow-it-to-work-on-Raspberry-Pi.patch → target/linux/brcm2708/patches-4.4/0080-gpio-poweroff-Allow-it-to-work-on-Raspberry-Pi.patch

@@ -1,7 +1,7 @@
-From 44d43099a94c8b2db818c80c67789ef5f9857b81 Mon Sep 17 00:00:00 2001
+From 11e9f3f8268e79dd28450eacffe1d7484f2a7361 Mon Sep 17 00:00:00 2001
 From: Phil Elwell <[email protected]>
 Date: Thu, 25 Jun 2015 12:16:11 +0100
-Subject: [PATCH 081/170] gpio-poweroff: Allow it to work on Raspberry Pi
+Subject: [PATCH 080/232] gpio-poweroff: Allow it to work on Raspberry Pi
 
 The Raspberry Pi firmware manages the power-down and reboot
 process. To do this it installs a pm_power_off handler, causing

target/linux/brcm2708/patches-4.4/0082-spidev-Add-spidev-compatible-string-to-silence-warni.patch → target/linux/brcm2708/patches-4.4/0081-spidev-Add-spidev-compatible-string-to-silence-warni.patch

@@ -1,7 +1,7 @@
-From 5b2d8bca046bd6f1a426e9205f194ece5b95e300 Mon Sep 17 00:00:00 2001
+From 958d09ad7f70ff5dd38a6c60b9e3f103e125168a Mon Sep 17 00:00:00 2001
 From: Phil Elwell <[email protected]>
 Date: Tue, 14 Jul 2015 10:26:09 +0100
-Subject: [PATCH 082/170] spidev: Add "spidev" compatible string to silence
+Subject: [PATCH 081/232] spidev: Add "spidev" compatible string to silence
  warning
 
 See: https://github.com/raspberrypi/linux/issues/1054

target/linux/brcm2708/patches-4.4/0083-scripts-dtc-Add-overlay-support.patch → target/linux/brcm2708/patches-4.4/0082-scripts-dtc-Add-overlay-support.patch

@@ -1,7 +1,7 @@
-From 534c337ea28bee34f886a1d1e00d281365c94efa Mon Sep 17 00:00:00 2001
+From 462447ecf49eb6dd6d77f3d21b272dd4fa68bee9 Mon Sep 17 00:00:00 2001
 From: Phil Elwell <[email protected]>
 Date: Tue, 14 Jul 2015 17:00:18 +0100
-Subject: [PATCH 083/170] scripts/dtc: Add overlay support
+Subject: [PATCH 082/232] scripts/dtc: Add overlay support
 
 ---
  scripts/dtc/checks.c                 |  119 ++-

target/linux/brcm2708/patches-4.4/0084-mfd-Add-Raspberry-Pi-Sense-HAT-core-driver.patch → target/linux/brcm2708/patches-4.4/0083-mfd-Add-Raspberry-Pi-Sense-HAT-core-driver.patch

@@ -1,7 +1,7 @@
-From b065c580329ecb7c7e77bb7019c6059d7db83398 Mon Sep 17 00:00:00 2001
+From 98ec469c223432d4f40317023a04cfa71f661c10 Mon Sep 17 00:00:00 2001
 From: Phil Elwell <[email protected]>
 Date: Tue, 14 Jul 2015 14:32:47 +0100
-Subject: [PATCH 084/170] mfd: Add Raspberry Pi Sense HAT core driver
+Subject: [PATCH 083/232] mfd: Add Raspberry Pi Sense HAT core driver
 
 ---
  drivers/input/joystick/Kconfig           |   8 +

target/linux/brcm2708/patches-4.4/0085-RaspiDAC3-support.patch → target/linux/brcm2708/patches-4.4/0084-RaspiDAC3-support.patch

@@ -1,7 +1,7 @@
-From c86a74aaff9bc42b3cb04881b3aaf7f822edda04 Mon Sep 17 00:00:00 2001
+From 5133d16d705f9ccf7f558ebc43861e1800512969 Mon Sep 17 00:00:00 2001
 From: Jan Grulich <[email protected]>
 Date: Mon, 24 Aug 2015 16:03:47 +0100
-Subject: [PATCH 085/170] RaspiDAC3 support
+Subject: [PATCH 084/232] RaspiDAC3 support
 
 Signed-off-by: Jan Grulich <[email protected]>
 

target/linux/brcm2708/patches-4.4/0086-tpa6130a2-Add-headphone-switch-control.patch → target/linux/brcm2708/patches-4.4/0085-tpa6130a2-Add-headphone-switch-control.patch

@@ -1,7 +1,7 @@
-From 2d340e2fbbc9f4735b798601a43ae9f0f4cc5742 Mon Sep 17 00:00:00 2001
+From 570d2d99cbf2b830e0d1be01dcc6fdd339b4d157 Mon Sep 17 00:00:00 2001
 From: Jan Grulich <[email protected]>
 Date: Mon, 24 Aug 2015 16:02:34 +0100
-Subject: [PATCH 086/170] tpa6130a2: Add headphone switch control
+Subject: [PATCH 085/232] tpa6130a2: Add headphone switch control
 
 Signed-off-by: Jan Grulich <[email protected]>
 ---

target/linux/brcm2708/patches-4.4/0087-irq-bcm2835-Fix-building-with-2708.patch → target/linux/brcm2708/patches-4.4/0086-irq-bcm2835-Fix-building-with-2708.patch

@@ -1,7 +1,7 @@
-From 6fc9d40bec5dbcf3ae8b52ab6850ed0b18193c82 Mon Sep 17 00:00:00 2001
+From a9e2bfff9a39efe94a066735509643fc3bed1ba0 Mon Sep 17 00:00:00 2001
 From: popcornmix <[email protected]>
 Date: Mon, 28 Sep 2015 23:38:59 +0100
-Subject: [PATCH 087/170] irq-bcm2835: Fix building with 2708
+Subject: [PATCH 086/232] irq-bcm2835: Fix building with 2708
 
 ---
  drivers/irqchip/irq-bcm2835.c | 3 ++-

target/linux/brcm2708/patches-4.4/0088-rpi_display-add-backlight-driver-and-overlay.patch → target/linux/brcm2708/patches-4.4/0087-rpi_display-add-backlight-driver-and-overlay.patch

@@ -1,7 +1,7 @@
-From 0e7ec1e61b149567d5af63169cd4d701c133356f Mon Sep 17 00:00:00 2001
+From 0a8cace2c9d473ac347cc08dfe19b24ad5ca3d2b Mon Sep 17 00:00:00 2001
 From: P33M <[email protected]>
 Date: Wed, 21 Oct 2015 14:55:21 +0100
-Subject: [PATCH 088/170] rpi_display: add backlight driver and overlay
+Subject: [PATCH 087/232] rpi_display: add backlight driver and overlay
 
 Add a mailbox-driven backlight controller for the Raspberry Pi DSI
 touchscreen display. Requires updated GPU firmware to recognise the

target/linux/brcm2708/patches-4.4/0089-bcm2835-dma-Fix-up-convert-to-DMA-pool.patch → target/linux/brcm2708/patches-4.4/0088-bcm2835-dma-Fix-up-convert-to-DMA-pool.patch

@@ -1,7 +1,7 @@
-From 0459ca97c1f2753ce805ab58ff17847cb4c142e0 Mon Sep 17 00:00:00 2001
+From ec2e48fda22c57cab56a4332d1a095f91c919493 Mon Sep 17 00:00:00 2001
 From: Matthias Reichl <[email protected]>
 Date: Mon, 16 Nov 2015 14:05:35 +0000
-Subject: [PATCH 089/170] bcm2835-dma: Fix up convert to DMA pool
+Subject: [PATCH 088/232] bcm2835-dma: Fix up convert to DMA pool
 
 ---
  drivers/dma/bcm2835-dma.c | 36 ++++++++++++++++++++++++++----------

target/linux/brcm2708/patches-4.4/0090-scripts-Multi-platform-support-for-mkknlimg-and-knli.patch → target/linux/brcm2708/patches-4.4/0089-scripts-Multi-platform-support-for-mkknlimg-and-knli.patch

@@ -1,7 +1,7 @@
-From f6dd60426dc7970ef4e9e3d9e00d374f80a6abd2 Mon Sep 17 00:00:00 2001
+From 9a67f8f17bb07bbfeee650327c88b6d381ab4af1 Mon Sep 17 00:00:00 2001
 From: Phil Elwell <[email protected]>
 Date: Wed, 11 Nov 2015 11:38:59 +0000
-Subject: [PATCH 090/170] scripts: Multi-platform support for mkknlimg and
+Subject: [PATCH 089/232] scripts: Multi-platform support for mkknlimg and
  knlinfo
 
 The firmware uses tags in the kernel trailer to choose which dtb file

target/linux/brcm2708/patches-4.4/0091-drm-vc4-Add-suport-for-3D-rendering-using-the-V3D-en.patch → target/linux/brcm2708/patches-4.4/0090-drm-vc4-Add-suport-for-3D-rendering-using-the-V3D-en.patch

@@ -1,7 +1,7 @@
-From 6d38553e5ce7fb70dd1f89665caf58064a7e97d7 Mon Sep 17 00:00:00 2001
+From 16c40415a78ba028f126b68e2cabf860186ff4f4 Mon Sep 17 00:00:00 2001
 From: Eric Anholt <[email protected]>
 Date: Mon, 2 Mar 2015 13:01:12 -0800
-Subject: [PATCH 091/170] drm/vc4: Add suport for 3D rendering using the V3D
+Subject: [PATCH 090/232] drm/vc4: Add suport for 3D rendering using the V3D
  engine.
 
 This is a squash of the out-of-tree development series.  Since that

target/linux/brcm2708/patches-4.4/0092-drm-vc4-Force-HDMI-to-connected.patch → target/linux/brcm2708/patches-4.4/0091-drm-vc4-Force-HDMI-to-connected.patch

@@ -1,7 +1,7 @@
-From aa579c7485e1bae681c50b223e89cd658dd0b2c1 Mon Sep 17 00:00:00 2001
+From fbec01e2d17b924d91850e17eeecf975e74c9ebf Mon Sep 17 00:00:00 2001
 From: Eric Anholt <[email protected]>
 Date: Wed, 14 Oct 2015 11:32:14 -0700
-Subject: [PATCH 092/170] drm/vc4: Force HDMI to connected.
+Subject: [PATCH 091/232] drm/vc4: Force HDMI to connected.
 
 For some reason on the downstream tree, the HPD GPIO isn't working.
 

target/linux/brcm2708/patches-4.4/0093-drm-vc4-bo-cache-locking-fixes.patch → target/linux/brcm2708/patches-4.4/0092-drm-vc4-bo-cache-locking-fixes.patch

@@ -1,7 +1,7 @@
-From edb828d91374e8fa4f05d68be008c40d4f9a158d Mon Sep 17 00:00:00 2001
+From d27b72cbcf572b0e2c18359f494d1f6aa90dd6f3 Mon Sep 17 00:00:00 2001
 From: Eric Anholt <[email protected]>
 Date: Mon, 19 Oct 2015 08:23:18 -0700
-Subject: [PATCH 093/170] drm/vc4: bo cache locking fixes.
+Subject: [PATCH 092/232] drm/vc4: bo cache locking fixes.
 
 Signed-off-by: Eric Anholt <[email protected]>
 ---

target/linux/brcm2708/patches-4.4/0094-drm-vc4-bo-cache-locking-cleanup.patch → target/linux/brcm2708/patches-4.4/0093-drm-vc4-bo-cache-locking-cleanup.patch

@@ -1,7 +1,7 @@
-From eafd7a031a15fb0d51a86b89e42ccde4f23434b4 Mon Sep 17 00:00:00 2001
+From 6473779beaeda1017d8487c3f510015f2b9b8f9d Mon Sep 17 00:00:00 2001
 From: Eric Anholt <[email protected]>
 Date: Mon, 19 Oct 2015 08:29:41 -0700
-Subject: [PATCH 094/170] drm/vc4: bo cache locking cleanup.
+Subject: [PATCH 093/232] drm/vc4: bo cache locking cleanup.
 
 Signed-off-by: Eric Anholt <[email protected]>
 ---

target/linux/brcm2708/patches-4.4/0095-drm-vc4-Use-job_lock-to-protect-seqno_cb_list.patch → target/linux/brcm2708/patches-4.4/0094-drm-vc4-Use-job_lock-to-protect-seqno_cb_list.patch

@@ -1,7 +1,7 @@
-From 482f2b3e97e919ac0ebc55a6040747495563b9a7 Mon Sep 17 00:00:00 2001
+From 1ec9d09f4b9ec69b3b0422fa3c26b3bcc82af64e Mon Sep 17 00:00:00 2001
 From: Eric Anholt <[email protected]>
 Date: Mon, 19 Oct 2015 08:32:24 -0700
-Subject: [PATCH 095/170] drm/vc4: Use job_lock to protect seqno_cb_list.
+Subject: [PATCH 094/232] drm/vc4: Use job_lock to protect seqno_cb_list.
 
 We're (mostly) not supposed to be using struct_mutex in drivers these
 days.

target/linux/brcm2708/patches-4.4/0095-drm-vc4-Drop-struct_mutex-around-CL-validation.patch

@@ -0,0 +1,63 @@
+From 016847d7cd5222d15f9213dc772d3808cd5d6e17 Mon Sep 17 00:00:00 2001
+From: Eric Anholt <[email protected]>
+Date: Mon, 19 Oct 2015 08:44:35 -0700
+Subject: [PATCH 095/232] drm/vc4: Drop struct_mutex around CL validation.
+
+We were using it so that we could make sure that shader validation
+state didn't change while we were validating, but now shader
+validation state is immutable.  The bcl/rcl generation doesn't do any
+other BO dereferencing, and seems to have no other global state
+dependency not covered by job_lock / bo_lock.
+
+Fixes a lock order reversal between mmap_sem and struct_mutex.
+
+Signed-off-by: Eric Anholt <[email protected]>
+---
+ drivers/gpu/drm/vc4/vc4_gem.c | 12 ++++--------
+ 1 file changed, 4 insertions(+), 8 deletions(-)
+
+--- a/drivers/gpu/drm/vc4/vc4_gem.c
++++ b/drivers/gpu/drm/vc4/vc4_gem.c
+@@ -244,13 +244,15 @@ static void
+ vc4_queue_submit(struct drm_device *dev, struct vc4_exec_info *exec)
+ {
+ 	struct vc4_dev *vc4 = to_vc4_dev(dev);
+-	uint64_t seqno = ++vc4->emit_seqno;
++	uint64_t seqno;
+ 	unsigned long irqflags;
+ 
++	spin_lock_irqsave(&vc4->job_lock, irqflags);
++
++	seqno = ++vc4->emit_seqno;
+ 	exec->seqno = seqno;
+ 	vc4_update_bo_seqnos(exec, seqno);
+ 
+-	spin_lock_irqsave(&vc4->job_lock, irqflags);
+ 	list_add_tail(&exec->head, &vc4->job_list);
+ 
+ 	/* If no job was executing, kick ours off.  Otherwise, it'll
+@@ -608,8 +610,6 @@ vc4_submit_cl_ioctl(struct drm_device *d
+ 	exec->args = args;
+ 	INIT_LIST_HEAD(&exec->unref_list);
+ 
+-	mutex_lock(&dev->struct_mutex);
+-
+ 	ret = vc4_cl_lookup_bos(dev, file_priv, exec);
+ 	if (ret)
+ 		goto fail;
+@@ -636,15 +636,11 @@ vc4_submit_cl_ioctl(struct drm_device *d
+ 	/* Return the seqno for our job. */
+ 	args->seqno = vc4->emit_seqno;
+ 
+-	mutex_unlock(&dev->struct_mutex);
+-
+ 	return 0;
+ 
+ fail:
+ 	vc4_complete_exec(exec);
+ 
+-	mutex_unlock(&dev->struct_mutex);
+-
+ 	return ret;
+ }
+ 

target/linux/brcm2708/patches-4.4/0096-drm-vc4-Drop-struct_mutex-around-CL-validation.patch

@@ -1,63 +1,74 @@
-From 4dc15a296586679d5b014011e44a093cf962123e Mon Sep 17 00:00:00 2001
+From 69aa18660bbe1ee6524c8220beb2af711146bc7f Mon Sep 17 00:00:00 2001
 From: Eric Anholt <[email protected]>
 Date: Mon, 19 Oct 2015 08:44:35 -0700
-Subject: [PATCH 096/170] drm/vc4: Drop struct_mutex around CL validation.
+Subject: [PATCH 096/232] drm/vc4: Drop struct_mutex around CL validation.
 
 We were using it so that we could make sure that shader validation
 state didn't change while we were validating, but now shader
 validation state is immutable.  The bcl/rcl generation doesn't do any
 other BO dereferencing, and seems to have no other global state
-dependency not covered by job_lock / bo_lock.
+dependency not covered by job_lock / bo_lock.  We only need to hold
+struct_mutex for object unreferencing.
 
 Fixes a lock order reversal between mmap_sem and struct_mutex.
 
 Signed-off-by: Eric Anholt <[email protected]>
 ---
- drivers/gpu/drm/vc4/vc4_gem.c | 12 ++++--------
- 1 file changed, 4 insertions(+), 8 deletions(-)
+ drivers/gpu/drm/vc4/vc4_gem.c | 13 ++++++-------
+ 1 file changed, 6 insertions(+), 7 deletions(-)
 
 --- a/drivers/gpu/drm/vc4/vc4_gem.c
 +++ b/drivers/gpu/drm/vc4/vc4_gem.c
-@@ -244,13 +244,15 @@ static void
- vc4_queue_submit(struct drm_device *dev, struct vc4_exec_info *exec)
+@@ -439,10 +439,12 @@ fail:
+ }
+ 
+ static void
+-vc4_complete_exec(struct vc4_exec_info *exec)
++vc4_complete_exec(struct drm_device *dev, struct vc4_exec_info *exec)
  {
- 	struct vc4_dev *vc4 = to_vc4_dev(dev);
--	uint64_t seqno = ++vc4->emit_seqno;
-+	uint64_t seqno;
- 	unsigned long irqflags;
+ 	unsigned i;
  
-+	spin_lock_irqsave(&vc4->job_lock, irqflags);
-+
-+	seqno = ++vc4->emit_seqno;
- 	exec->seqno = seqno;
- 	vc4_update_bo_seqnos(exec, seqno);
++	/* Need the struct lock for drm_gem_object_unreference(). */
++	mutex_lock(&dev->struct_mutex);
+ 	if (exec->bo) {
+ 		for (i = 0; i < exec->bo_count; i++)
+ 			drm_gem_object_unreference(&exec->bo[i].bo->base);
+@@ -455,6 +457,7 @@ vc4_complete_exec(struct vc4_exec_info *
+ 		list_del(&bo->unref_head);
+ 		drm_gem_object_unreference(&bo->base.base);
+ 	}
++	mutex_unlock(&dev->struct_mutex);
  
--	spin_lock_irqsave(&vc4->job_lock, irqflags);
- 	list_add_tail(&exec->head, &vc4->job_list);
+ 	kfree(exec);
+ }
+@@ -473,7 +476,7 @@ vc4_job_handle_completed(struct vc4_dev
+ 		list_del(&exec->head);
  
- 	/* If no job was executing, kick ours off.  Otherwise, it'll
-@@ -608,8 +610,6 @@ vc4_submit_cl_ioctl(struct drm_device *d
- 	exec->args = args;
- 	INIT_LIST_HEAD(&exec->unref_list);
+ 		spin_unlock_irqrestore(&vc4->job_lock, irqflags);
+-		vc4_complete_exec(exec);
++		vc4_complete_exec(vc4->dev, exec);
+ 		spin_lock_irqsave(&vc4->job_lock, irqflags);
+ 	}
  
--	mutex_lock(&dev->struct_mutex);
--
- 	ret = vc4_cl_lookup_bos(dev, file_priv, exec);
- 	if (ret)
- 		goto fail;
-@@ -636,15 +636,11 @@ vc4_submit_cl_ioctl(struct drm_device *d
- 	/* Return the seqno for our job. */
- 	args->seqno = vc4->emit_seqno;
+@@ -525,12 +528,8 @@ vc4_job_done_work(struct work_struct *wo
+ {
+ 	struct vc4_dev *vc4 =
+ 		container_of(work, struct vc4_dev, job_done_work);
+-	struct drm_device *dev = vc4->dev;
  
+-	/* Need the struct lock for drm_gem_object_unreference(). */
+-	mutex_lock(&dev->struct_mutex);
+ 	vc4_job_handle_completed(vc4);
 -	mutex_unlock(&dev->struct_mutex);
--
+ }
+ 
+ static int
+@@ -639,7 +638,7 @@ vc4_submit_cl_ioctl(struct drm_device *d
  	return 0;
  
  fail:
- 	vc4_complete_exec(exec);
+-	vc4_complete_exec(exec);
++	vc4_complete_exec(vc4->dev, exec);
  
--	mutex_unlock(&dev->struct_mutex);
--
  	return ret;
  }
- 

target/linux/brcm2708/patches-4.4/0098-drm-vc4-Add-support-for-more-display-plane-formats.patch → target/linux/brcm2708/patches-4.4/0097-drm-vc4-Add-support-for-more-display-plane-formats.patch

@@ -1,7 +1,7 @@
-From 0193a1e5b931c7363279282b4169c2152af1a621 Mon Sep 17 00:00:00 2001
+From 111e49bbb002b4dd86ef0c7e0b314c336e6a01c3 Mon Sep 17 00:00:00 2001
 From: Eric Anholt <[email protected]>
 Date: Tue, 20 Oct 2015 13:59:15 +0100
-Subject: [PATCH 098/170] drm/vc4: Add support for more display plane formats.
+Subject: [PATCH 097/232] drm/vc4: Add support for more display plane formats.
 
 Signed-off-by: Eric Anholt <[email protected]>
 ---