remove 2.6.34 support

SVN-Revision: 26229

target/linux/adm5120/patches-2.6.34/001-adm5120.patch

@@ -1,58 +0,0 @@
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -23,6 +23,21 @@ choice
- 	prompt "System type"
- 	default SGI_IP22
- 
-+config ADM5120
-+	bool "Infineon/ADMtek ADM5120 SoC based machines"
-+	select CEVT_R4K
-+	select CSRC_R4K
-+	select SYS_HAS_CPU_MIPS32_R1
-+	select SYS_HAS_EARLY_PRINTK
-+	select DMA_NONCOHERENT
-+	select IRQ_CPU
-+	select SYS_SUPPORTS_LITTLE_ENDIAN
-+	select SYS_SUPPORTS_BIG_ENDIAN
-+	select SYS_SUPPORTS_32BIT_KERNEL
-+	select ARCH_REQUIRE_GPIOLIB
-+	select SWAP_IO_SPACE if CPU_BIG_ENDIAN
-+	select MIPS_MACHINE
-+
- config MACH_ALCHEMY
- 	bool "Alchemy processor based machines"
- 	select SYS_SUPPORTS_ZBOOT
-@@ -683,6 +698,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
- 
- endchoice
- 
-+source "arch/mips/adm5120/Kconfig"
- source "arch/mips/alchemy/Kconfig"
- source "arch/mips/bcm63xx/Kconfig"
- source "arch/mips/jazz/Kconfig"
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -227,6 +227,23 @@ cflags-$(CONFIG_MACH_JAZZ)	+= -I$(srctre
- load-$(CONFIG_MACH_JAZZ)	+= 0xffffffff80080000
- 
- #
-+# Infineon/ADMtek ADM5120
-+#
-+libs-$(CONFIG_ADM5120)			+= arch/mips/adm5120/prom/
-+core-$(CONFIG_ADM5120)			+= arch/mips/adm5120/common/
-+core-$(CONFIG_ADM5120_OEM_CELLVISION)	+= arch/mips/adm5120/cellvision/
-+core-$(CONFIG_ADM5120_OEM_COMPEX)	+= arch/mips/adm5120/compex/
-+core-$(CONFIG_ADM5120_OEM_EDIMAX)	+= arch/mips/adm5120/edimax/
-+core-$(CONFIG_ADM5120_OEM_GENERIC)	+= arch/mips/adm5120/generic/
-+core-$(CONFIG_ADM5120_OEM_INFINEON)	+= arch/mips/adm5120/infineon/
-+core-$(CONFIG_ADM5120_OEM_MIKROTIK)	+= arch/mips/adm5120/mikrotik/
-+core-$(CONFIG_ADM5120_OEM_MOTOROLA)	+= arch/mips/adm5120/motorola/
-+core-$(CONFIG_ADM5120_OEM_OSBRIDGE)	+= arch/mips/adm5120/osbridge/
-+core-$(CONFIG_ADM5120_OEM_ZYXEL)	+= arch/mips/adm5120/zyxel/
-+cflags-$(CONFIG_ADM5120)		+= -I$(srctree)/arch/mips/include/asm/mach-adm5120
-+load-$(CONFIG_ADM5120)			+= 0xffffffff80001000
-+
-+#
- # Common Alchemy Au1x00 stuff
- #
- core-$(CONFIG_SOC_AU1X00)	+= arch/mips/alchemy/common/

target/linux/adm5120/patches-2.6.34/002-adm5120_flash.patch

@@ -1,21 +0,0 @@
---- a/drivers/mtd/maps/Kconfig
-+++ b/drivers/mtd/maps/Kconfig
-@@ -551,4 +551,8 @@ config MTD_PISMO
- 
- 	  When built as a module, it will be called pismo.ko
- 
-+config MTD_ADM5120
-+	tristate "Map driver for ADM5120 based boards"
-+	depends on ADM5120
-+
- endmenu
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -40,6 +40,7 @@ obj-$(CONFIG_MTD_SCx200_DOCFLASH)+= scx2
- obj-$(CONFIG_MTD_DBOX2)		+= dbox2-flash.o
- obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
- obj-$(CONFIG_MTD_PCI)		+= pci.o
-+obj-$(CONFIG_MTD_ADM5120)	+= adm5120-flash.o
- obj-$(CONFIG_MTD_AUTCPU12)	+= autcpu12-nvram.o
- obj-$(CONFIG_MTD_EDB7312)	+= edb7312.o
- obj-$(CONFIG_MTD_IMPA7)		+= impa7.o

target/linux/adm5120/patches-2.6.34/003-adm5120_switch.patch

@@ -1,23 +0,0 @@
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -614,6 +614,10 @@ config MIPS_AU1X00_ENET
- 	  If you have an Alchemy Semi AU1X00 based system
- 	  say Y.  Otherwise, say N.
- 
-+config ADM5120_ENET
-+	tristate "ADM5120 Ethernet switch support"
-+	depends on ADM5120
-+
- config SGI_IOC3_ETH
- 	bool "SGI IOC3 Ethernet"
- 	depends on PCI && SGI_IP27
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -213,6 +213,7 @@ obj-$(CONFIG_SC92031) += sc92031.o
- # This is also a 82596 and should probably be merged
- obj-$(CONFIG_LP486E) += lp486e.o
- 
-+obj-$(CONFIG_ADM5120_ENET) += adm5120sw.o
- obj-$(CONFIG_ETH16I) += eth16i.o
- obj-$(CONFIG_ZORRO8390) += zorro8390.o 8390.o
- obj-$(CONFIG_HPLANCE) += hplance.o 7990.o

target/linux/adm5120/patches-2.6.34/005-adm5120_usb.patch

@@ -1,33 +0,0 @@
---- a/drivers/usb/Makefile
-+++ b/drivers/usb/Makefile
-@@ -9,6 +9,7 @@ obj-$(CONFIG_USB)		+= core/
- obj-$(CONFIG_USB_MON)		+= mon/
- 
- obj-$(CONFIG_PCI)		+= host/
-+obj-$(CONFIG_USB_ADM5120_HCD)	+= host/
- obj-$(CONFIG_USB_EHCI_HCD)	+= host/
- obj-$(CONFIG_USB_ISP116X_HCD)	+= host/
- obj-$(CONFIG_USB_OHCI_HCD)	+= host/
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -4,6 +4,10 @@
- comment "USB Host Controller Drivers"
- 	depends on USB
- 
-+config USB_ADM5120_HCD
-+	tristate "ADM5120 HCD support (EXPERIMENTAL)"
-+	depends on USB && ADM5120 && EXPERIMENTAL
-+
- config USB_C67X00_HCD
- 	tristate "Cypress C67x00 HCD support"
- 	depends on USB
---- a/drivers/usb/host/Makefile
-+++ b/drivers/usb/host/Makefile
-@@ -18,6 +18,7 @@ obj-$(CONFIG_USB_WHCI_HCD)	+= whci/
- 
- obj-$(CONFIG_PCI)		+= pci-quirks.o
- 
-+obj-$(CONFIG_USB_ADM5120_HCD)	+= adm5120-hcd.o
- obj-$(CONFIG_USB_EHCI_HCD)	+= ehci-hcd.o
- obj-$(CONFIG_USB_OXU210HP_HCD)	+= oxu210hp-hcd.o
- obj-$(CONFIG_USB_ISP116X_HCD)	+= isp116x-hcd.o

target/linux/adm5120/patches-2.6.34/007-adm5120_pci.patch

@@ -1,22 +0,0 @@
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -55,6 +55,7 @@ obj-$(CONFIG_ZAO_CAPCELLA)	+= fixup-capc
- obj-$(CONFIG_WR_PPMC)		+= fixup-wrppmc.o
- obj-$(CONFIG_MIKROTIK_RB532)	+= pci-rc32434.o ops-rc32434.o fixup-rc32434.o
- obj-$(CONFIG_CPU_CAVIUM_OCTEON)	+= pci-octeon.o pcie-octeon.o
-+obj-$(CONFIG_ADM5120)		+= pci-adm5120.o
- 
- ifdef CONFIG_PCI_MSI
- obj-$(CONFIG_CPU_CAVIUM_OCTEON)	+= msi-octeon.o
---- a/include/linux/pci_ids.h
-+++ b/include/linux/pci_ids.h
-@@ -1753,6 +1753,9 @@
- #define PCI_VENDOR_ID_ESDGMBH		0x12fe
- #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
- 
-+#define PCI_VENDOR_ID_ADMTEK		0x1317
-+#define PCI_DEVICE_ID_ADMTEK_ADM5120	0x5120
-+
- #define PCI_VENDOR_ID_SIIG		0x131f
- #define PCI_SUBVENDOR_ID_SIIG		0x131f
- #define PCI_DEVICE_ID_SIIG_1S_10x_550	0x1000

target/linux/adm5120/patches-2.6.34/009-adm5120_leds_switch_trigger.patch

@@ -1,22 +0,0 @@
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -372,4 +372,12 @@ config LEDS_TRIGGER_USBDEV
- 	  This allows LEDs to be controlled by the presence/activity of
- 	  an USB device. If unsure, say N.
- 
-+config LEDS_TRIGGER_ADM5120_SWITCH
-+	tristate "LED ADM5120 Switch Port Status Trigger"
-+	depends on LEDS_TRIGGERS && ADM5120
-+	help
-+	  This allows LEDs to be controlled by the port states of
-+	  the ADM5120 built-in Ethernet Switch
-+	  If unsure, say N.
-+
- endif # NEW_LEDS
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -49,3 +49,4 @@ obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON)	+=
- obj-$(CONFIG_LEDS_TRIGGER_MORSE)	+= ledtrig-morse.o
- obj-$(CONFIG_LEDS_TRIGGER_NETDEV)	+= ledtrig-netdev.o
- obj-$(CONFIG_LEDS_TRIGGER_USBDEV)	+= ledtrig-usbdev.o
-+obj-$(CONFIG_LEDS_TRIGGER_ADM5120_SWITCH) += ledtrig-adm5120-switch.o

target/linux/adm5120/patches-2.6.34/101-cfi_fixup_macronix_bootloc.patch

@@ -1,84 +0,0 @@
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -52,6 +52,12 @@
- #define SST49LF008A		0x005a
- #define AT49BV6416		0x00d6
- 
-+/* Macronix */
-+#define MX29LV160B	0x2249	/* MX29LV160 Bottom-boot chip */
-+#define MX29LV160T	0x22C4	/* MX29LV160 Top-boot chip */
-+#define MX29LV320B	0x22A8	/* MX29LV320 Bottom-boot chip */
-+#define MX29LV320T	0x22A7	/* MX29LV320 Top-boot chip */
-+
- static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
- static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
- static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-@@ -282,6 +288,41 @@ static void fixup_s29gl032n_sectors(stru
- 	}
- }
- 
-+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
-+/*
-+ * Some Macronix chips has no/bad bootblock information in the CFI table
-+ */
-+static void fixup_macronix_bootloc(struct mtd_info *mtd, void* param)
-+{
-+	struct map_info *map = mtd->priv;
-+	struct cfi_private *cfi = map->fldrv_priv;
-+	struct cfi_pri_amdstd *extp = cfi->cmdset_priv;
-+	__u8 t;
-+
-+	switch (cfi->id) {
-+	/* TODO: put affected chip ids here */
-+	case MX29LV160B:
-+	case MX29LV320B:
-+		t = 2;	/* Bottom boot */
-+		break;
-+	case MX29LV160T:
-+	case MX29LV320T:
-+		t = 3;	/* Top boot */
-+		break;
-+	default:
-+		return;
-+	}
-+
-+	if (extp->TopBottom == t)
-+		/* boot location detected by the CFI layer is correct */
-+		return;
-+
-+	extp->TopBottom = t;
-+	printk("%s: Macronix chip detected, id:0x%04X, boot location forced "
-+		"to %s\n", map->name, cfi->id, (t == 2) ? "bottom" : "top");
-+}
-+#endif /* CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC */
-+
- static struct cfi_fixup cfi_fixup_table[] = {
- 	{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
- #ifdef AMD_BOOTLOC_BUG
-@@ -318,6 +359,9 @@ static struct cfi_fixup fixup_table[] =
- 	 */
- 	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_erase_chip, NULL },
- 	{ CFI_MFR_ATMEL, AT49BV6416, fixup_use_atmel_lock, NULL },
-+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
-+	{ MANUFACTURER_MACRONIX, CFI_ID_ANY, fixup_macronix_bootloc, NULL, },
-+#endif
- 	{ 0, 0, NULL, NULL }
- };
- 
---- a/drivers/mtd/chips/Kconfig
-+++ b/drivers/mtd/chips/Kconfig
-@@ -196,6 +196,14 @@ config MTD_CFI_AMDSTD
- 	  provides support for one of those command sets, used on chips
- 	  including the AMD Am29LV320.
- 
-+config MTD_CFI_FIXUP_MACRONIX_BOOTLOC
-+	bool "Fix boot-block location for Macronix flash chips"
-+	depends on MTD_CFI_AMDSTD
-+	help
-+	  Some Macronix flash chips have no/wrong boot-block location in the
-+	  CFI table, and the driver may detect the type incorrectly. Select
-+	  this if your board has such chip.
-+
- config MTD_CFI_STAA
- 	tristate "Support for ST (Advanced Architecture) flash chips"
- 	depends on MTD_GEN_PROBE

target/linux/adm5120/patches-2.6.34/102-jedec_pmc_39lvxxx_chips.patch

@@ -1,68 +0,0 @@
---- a/drivers/mtd/chips/jedec_probe.c
-+++ b/drivers/mtd/chips/jedec_probe.c
-@@ -133,6 +133,10 @@
- #define UPD29F064115	0x221C
- 
- /* PMC */
-+#define PM39LV512	0x001B
-+#define PM39LV010	0x001C
-+#define PM39LV020	0x003D
-+#define PM39LV040	0x003E
- #define PM49FL002	0x006D
- #define PM49FL004	0x006E
- #define PM49FL008	0x006A
-@@ -1275,6 +1279,54 @@ static const struct amd_flash_info jedec
- 			ERASEINFO(0x02000,2),
- 			ERASEINFO(0x04000,1),
- 		}
-+        }, {
-+		.mfr_id		= MANUFACTURER_PMC,
-+		.dev_id		= PM39LV512,
-+		.name		= "PMC Pm39LV512",
-+		.devtypes	= CFI_DEVICETYPE_X8,
-+		.uaddr		= MTD_UADDR_0x0555_0x02AA,
-+		.dev_size	= SIZE_64KiB,
-+		.cmd_set	= P_ID_AMD_STD,
-+		.nr_regions	= 1,
-+		.regions	= {
-+			ERASEINFO(0x01000,16),
-+		}
-+        }, {
-+		.mfr_id		= MANUFACTURER_PMC,
-+		.dev_id		= PM39LV010,
-+		.name		= "PMC Pm39LV010",
-+		.devtypes	= CFI_DEVICETYPE_X8,
-+		.uaddr		= MTD_UADDR_0x0555_0x02AA,
-+		.dev_size	= SIZE_128KiB,
-+		.cmd_set	= P_ID_AMD_STD,
-+		.nr_regions	= 1,
-+		.regions	= {
-+			ERASEINFO(0x01000,32),
-+		}
-+        }, {
-+		.mfr_id		= MANUFACTURER_PMC,
-+		.dev_id		= PM39LV020,
-+		.name		= "PMC Pm39LV020",
-+		.devtypes	= CFI_DEVICETYPE_X8,
-+		.uaddr		= MTD_UADDR_0x0555_0x02AA,
-+		.dev_size	= SIZE_256KiB,
-+		.cmd_set	= P_ID_AMD_STD,
-+		.nr_regions	= 1,
-+		.regions	= {
-+			ERASEINFO(0x01000,64),
-+		}
-+        }, {
-+		.mfr_id		= MANUFACTURER_PMC,
-+		.dev_id		= PM39LV040,
-+		.name		= "PMC Pm39LV040",
-+		.devtypes	= CFI_DEVICETYPE_X8,
-+		.uaddr		= MTD_UADDR_0x0555_0x02AA,
-+		.dev_size	= SIZE_512KiB,
-+		.cmd_set	= P_ID_AMD_STD,
-+		.nr_regions	= 1,
-+		.regions	= {
-+			ERASEINFO(0x01000,128),
-+		}
- 	}, {
- 		.mfr_id		= MANUFACTURER_PMC,
- 		.dev_id		= PM49FL002,

target/linux/adm5120/patches-2.6.34/103-mtd_trxsplit.patch

@@ -1,24 +0,0 @@
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -63,6 +63,11 @@ config MTD_ROOTFS_SPLIT
- 	depends on MTD_PARTITIONS
- 	default y
- 
-+config MTD_TRXSPLIT
-+	bool "Automatically find and split TRX partitions"
-+	depends on MTD_PARTITIONS
-+	default n
-+
- config MTD_REDBOOT_PARTS
- 	tristate "RedBoot partition table parsing"
- 	depends on MTD_PARTITIONS
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -8,6 +8,7 @@ mtd-y				:= mtdcore.o mtdsuper.o
- mtd-$(CONFIG_MTD_PARTITIONS)	+= mtdpart.o
- 
- obj-$(CONFIG_MTD_CONCAT)	+= mtdconcat.o
-+obj-$(CONFIG_MTD_TRXSPLIT)	+= trxsplit.o
- obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
- obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
- obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o

target/linux/adm5120/patches-2.6.34/120-rb153_cf_driver.patch

@@ -1,28 +0,0 @@
---- a/drivers/ata/Makefile
-+++ b/drivers/ata/Makefile
-@@ -79,6 +79,7 @@ obj-$(CONFIG_PATA_PLATFORM)	+= pata_plat
- obj-$(CONFIG_PATA_AT91)	+= pata_at91.o
- obj-$(CONFIG_PATA_OF_PLATFORM)	+= pata_of_platform.o
- obj-$(CONFIG_PATA_ICSIDE)	+= pata_icside.o
-+obj-$(CONFIG_PATA_RB153_CF)	+= pata_rb153_cf.o
- # Should be last but two libata driver
- obj-$(CONFIG_PATA_ACPI)		+= pata_acpi.o
- # Should be last but one libata driver
---- a/drivers/ata/Kconfig
-+++ b/drivers/ata/Kconfig
-@@ -604,6 +604,15 @@ config PATA_RADISYS
- 
- 	  If unsure, say N.
- 
-+config PATA_RB153_CF
-+	tristate "RouterBOARD 153 Compact Flash support"
-+	depends on ADM5120_MACH_RB_153
-+	help
-+	  This option enables support for a Compact Flash connected on
-+	  the RouterBOARD 153.
-+
-+	  If unsure, say N.
-+
- config PATA_RB532
- 	tristate "RouterBoard 532 PATA CompactFlash support"
- 	depends on MIKROTIK_RB532

target/linux/adm5120/patches-2.6.34/200-amba_pl010_hacks.patch

@@ -1,378 +0,0 @@
---- a/drivers/serial/amba-pl010.c
-+++ b/drivers/serial/amba-pl010.c
-@@ -51,11 +51,10 @@
- 
- #include <asm/io.h>
- 
--#define UART_NR		8
--
- #define SERIAL_AMBA_MAJOR	204
- #define SERIAL_AMBA_MINOR	16
--#define SERIAL_AMBA_NR		UART_NR
-+#define SERIAL_AMBA_NR		CONFIG_SERIAL_AMBA_PL010_NUMPORTS
-+#define SERIAL_AMBA_NAME	CONFIG_SERIAL_AMBA_PL010_PORTNAME
- 
- #define AMBA_ISR_PASS_LIMIT	256
- 
-@@ -81,9 +80,9 @@ static void pl010_stop_tx(struct uart_po
- 	struct uart_amba_port *uap = (struct uart_amba_port *)port;
- 	unsigned int cr;
- 
--	cr = readb(uap->port.membase + UART010_CR);
-+	cr = __raw_readl(uap->port.membase + UART010_CR);
- 	cr &= ~UART010_CR_TIE;
--	writel(cr, uap->port.membase + UART010_CR);
-+	__raw_writel(cr, uap->port.membase + UART010_CR);
- }
- 
- static void pl010_start_tx(struct uart_port *port)
-@@ -91,9 +90,9 @@ static void pl010_start_tx(struct uart_p
- 	struct uart_amba_port *uap = (struct uart_amba_port *)port;
- 	unsigned int cr;
- 
--	cr = readb(uap->port.membase + UART010_CR);
-+	cr = __raw_readl(uap->port.membase + UART010_CR);
- 	cr |= UART010_CR_TIE;
--	writel(cr, uap->port.membase + UART010_CR);
-+	__raw_writel(cr, uap->port.membase + UART010_CR);
- }
- 
- static void pl010_stop_rx(struct uart_port *port)
-@@ -101,9 +100,9 @@ static void pl010_stop_rx(struct uart_po
- 	struct uart_amba_port *uap = (struct uart_amba_port *)port;
- 	unsigned int cr;
- 
--	cr = readb(uap->port.membase + UART010_CR);
-+	cr = __raw_readl(uap->port.membase + UART010_CR);
- 	cr &= ~(UART010_CR_RIE | UART010_CR_RTIE);
--	writel(cr, uap->port.membase + UART010_CR);
-+	__raw_writel(cr, uap->port.membase + UART010_CR);
- }
- 
- static void pl010_enable_ms(struct uart_port *port)
-@@ -111,9 +110,9 @@ static void pl010_enable_ms(struct uart_
- 	struct uart_amba_port *uap = (struct uart_amba_port *)port;
- 	unsigned int cr;
- 
--	cr = readb(uap->port.membase + UART010_CR);
-+	cr = __raw_readl(uap->port.membase + UART010_CR);
- 	cr |= UART010_CR_MSIE;
--	writel(cr, uap->port.membase + UART010_CR);
-+	__raw_writel(cr, uap->port.membase + UART010_CR);
- }
- 
- static void pl010_rx_chars(struct uart_amba_port *uap)
-@@ -121,9 +120,9 @@ static void pl010_rx_chars(struct uart_a
- 	struct tty_struct *tty = uap->port.state->port.tty;
- 	unsigned int status, ch, flag, rsr, max_count = 256;
- 
--	status = readb(uap->port.membase + UART01x_FR);
-+	status = __raw_readl(uap->port.membase + UART01x_FR);
- 	while (UART_RX_DATA(status) && max_count--) {
--		ch = readb(uap->port.membase + UART01x_DR);
-+		ch = __raw_readl(uap->port.membase + UART01x_DR);
- 		flag = TTY_NORMAL;
- 
- 		uap->port.icount.rx++;
-@@ -132,9 +131,9 @@ static void pl010_rx_chars(struct uart_a
- 		 * Note that the error handling code is
- 		 * out of the main execution path
- 		 */
--		rsr = readb(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
-+		rsr = __raw_readl(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
- 		if (unlikely(rsr & UART01x_RSR_ANY)) {
--			writel(0, uap->port.membase + UART01x_ECR);
-+			__raw_writel(0, uap->port.membase + UART01x_ECR);
- 
- 			if (rsr & UART01x_RSR_BE) {
- 				rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE);
-@@ -164,7 +163,7 @@ static void pl010_rx_chars(struct uart_a
- 		uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag);
- 
- 	ignore_char:
--		status = readb(uap->port.membase + UART01x_FR);
-+		status = __raw_readl(uap->port.membase + UART01x_FR);
- 	}
- 	spin_unlock(&uap->port.lock);
- 	tty_flip_buffer_push(tty);
-@@ -177,7 +176,7 @@ static void pl010_tx_chars(struct uart_a
- 	int count;
- 
- 	if (uap->port.x_char) {
--		writel(uap->port.x_char, uap->port.membase + UART01x_DR);
-+		__raw_writel(uap->port.x_char, uap->port.membase + UART01x_DR);
- 		uap->port.icount.tx++;
- 		uap->port.x_char = 0;
- 		return;
-@@ -189,7 +188,7 @@ static void pl010_tx_chars(struct uart_a
- 
- 	count = uap->port.fifosize >> 1;
- 	do {
--		writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR);
-+		__raw_writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR);
- 		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- 		uap->port.icount.tx++;
- 		if (uart_circ_empty(xmit))
-@@ -207,9 +206,9 @@ static void pl010_modem_status(struct ua
- {
- 	unsigned int status, delta;
- 
--	writel(0, uap->port.membase + UART010_ICR);
-+	__raw_writel(0, uap->port.membase + UART010_ICR);
- 
--	status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
-+	status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
- 
- 	delta = status ^ uap->old_status;
- 	uap->old_status = status;
-@@ -237,7 +236,7 @@ static irqreturn_t pl010_int(int irq, vo
- 
- 	spin_lock(&uap->port.lock);
- 
--	status = readb(uap->port.membase + UART010_IIR);
-+	status = __raw_readl(uap->port.membase + UART010_IIR);
- 	if (status) {
- 		do {
- 			if (status & (UART010_IIR_RTIS | UART010_IIR_RIS))
-@@ -250,7 +249,7 @@ static irqreturn_t pl010_int(int irq, vo
- 			if (pass_counter-- == 0)
- 				break;
- 
--			status = readb(uap->port.membase + UART010_IIR);
-+			status = __raw_readl(uap->port.membase + UART010_IIR);
- 		} while (status & (UART010_IIR_RTIS | UART010_IIR_RIS |
- 				   UART010_IIR_TIS));
- 		handled = 1;
-@@ -264,7 +263,7 @@ static irqreturn_t pl010_int(int irq, vo
- static unsigned int pl010_tx_empty(struct uart_port *port)
- {
- 	struct uart_amba_port *uap = (struct uart_amba_port *)port;
--	unsigned int status = readb(uap->port.membase + UART01x_FR);
-+	unsigned int status = __raw_readl(uap->port.membase + UART01x_FR);
- 	return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT;
- }
- 
-@@ -274,7 +273,7 @@ static unsigned int pl010_get_mctrl(stru
- 	unsigned int result = 0;
- 	unsigned int status;
- 
--	status = readb(uap->port.membase + UART01x_FR);
-+	status = __raw_readl(uap->port.membase + UART01x_FR);
- 	if (status & UART01x_FR_DCD)
- 		result |= TIOCM_CAR;
- 	if (status & UART01x_FR_DSR)
-@@ -300,12 +299,12 @@ static void pl010_break_ctl(struct uart_
- 	unsigned int lcr_h;
- 
- 	spin_lock_irqsave(&uap->port.lock, flags);
--	lcr_h = readb(uap->port.membase + UART010_LCRH);
-+	lcr_h = __raw_readl(uap->port.membase + UART010_LCRH);
- 	if (break_state == -1)
- 		lcr_h |= UART01x_LCRH_BRK;
- 	else
- 		lcr_h &= ~UART01x_LCRH_BRK;
--	writel(lcr_h, uap->port.membase + UART010_LCRH);
-+	__raw_writel(lcr_h, uap->port.membase + UART010_LCRH);
- 	spin_unlock_irqrestore(&uap->port.lock, flags);
- }
- 
-@@ -333,12 +332,12 @@ static int pl010_startup(struct uart_por
- 	/*
- 	 * initialise the old status of the modem signals
- 	 */
--	uap->old_status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
-+	uap->old_status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
- 
- 	/*
- 	 * Finally, enable interrupts
- 	 */
--	writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE,
-+	__raw_writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE,
- 	       uap->port.membase + UART010_CR);
- 
- 	return 0;
-@@ -361,10 +360,10 @@ static void pl010_shutdown(struct uart_p
- 	/*
- 	 * disable all interrupts, disable the port
- 	 */
--	writel(0, uap->port.membase + UART010_CR);
-+	__raw_writel(0, uap->port.membase + UART010_CR);
- 
- 	/* disable break condition and fifos */
--	writel(readb(uap->port.membase + UART010_LCRH) &
-+	__raw_writel(__raw_readl(uap->port.membase + UART010_LCRH) &
- 		~(UART01x_LCRH_BRK | UART01x_LCRH_FEN),
- 	       uap->port.membase + UART010_LCRH);
- 
-@@ -386,7 +385,7 @@ pl010_set_termios(struct uart_port *port
- 	/*
- 	 * Ask the core to calculate the divisor for us.
- 	 */
--	baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16); 
-+	baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16);
- 	quot = uart_get_divisor(port, baud);
- 
- 	switch (termios->c_cflag & CSIZE) {
-@@ -449,25 +448,25 @@ pl010_set_termios(struct uart_port *port
- 		uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX;
- 
- 	/* first, disable everything */
--	old_cr = readb(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
-+	old_cr = __raw_readl(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
- 
- 	if (UART_ENABLE_MS(port, termios->c_cflag))
- 		old_cr |= UART010_CR_MSIE;
- 
--	writel(0, uap->port.membase + UART010_CR);
-+	__raw_writel(0, uap->port.membase + UART010_CR);
- 
- 	/* Set baud rate */
- 	quot -= 1;
--	writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM);
--	writel(quot & 0xff, uap->port.membase + UART010_LCRL);
-+	__raw_writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM);
-+	__raw_writel(quot & 0xff, uap->port.membase + UART010_LCRL);
- 
- 	/*
- 	 * ----------v----------v----------v----------v-----
- 	 * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L
- 	 * ----------^----------^----------^----------^-----
- 	 */
--	writel(lcr_h, uap->port.membase + UART010_LCRH);
--	writel(old_cr, uap->port.membase + UART010_CR);
-+	__raw_writel(lcr_h, uap->port.membase + UART010_LCRH);
-+	__raw_writel(old_cr, uap->port.membase + UART010_CR);
- 
- 	spin_unlock_irqrestore(&uap->port.lock, flags);
- }
-@@ -554,7 +553,7 @@ static struct uart_ops amba_pl010_pops =
- 	.verify_port	= pl010_verify_port,
- };
- 
--static struct uart_amba_port *amba_ports[UART_NR];
-+static struct uart_amba_port *amba_ports[SERIAL_AMBA_NR];
- 
- #ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE
- 
-@@ -564,10 +563,10 @@ static void pl010_console_putchar(struct
- 	unsigned int status;
- 
- 	do {
--		status = readb(uap->port.membase + UART01x_FR);
-+		status = __raw_readl(uap->port.membase + UART01x_FR);
- 		barrier();
- 	} while (!UART_TX_READY(status));
--	writel(ch, uap->port.membase + UART01x_DR);
-+	__raw_writel(ch, uap->port.membase + UART01x_DR);
- }
- 
- static void
-@@ -581,8 +580,8 @@ pl010_console_write(struct console *co,
- 	/*
- 	 *	First save the CR then disable the interrupts
- 	 */
--	old_cr = readb(uap->port.membase + UART010_CR);
--	writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
-+	old_cr = __raw_readl(uap->port.membase + UART010_CR);
-+	__raw_writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
- 
- 	uart_console_write(&uap->port, s, count, pl010_console_putchar);
- 
-@@ -591,10 +590,10 @@ pl010_console_write(struct console *co,
- 	 *	and restore the TCR
- 	 */
- 	do {
--		status = readb(uap->port.membase + UART01x_FR);
-+		status = __raw_readl(uap->port.membase + UART01x_FR);
- 		barrier();
- 	} while (status & UART01x_FR_BUSY);
--	writel(old_cr, uap->port.membase + UART010_CR);
-+	__raw_writel(old_cr, uap->port.membase + UART010_CR);
- 
- 	clk_disable(uap->clk);
- }
-@@ -603,9 +602,9 @@ static void __init
- pl010_console_get_options(struct uart_amba_port *uap, int *baud,
- 			     int *parity, int *bits)
- {
--	if (readb(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
-+	if (__raw_readl(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
- 		unsigned int lcr_h, quot;
--		lcr_h = readb(uap->port.membase + UART010_LCRH);
-+		lcr_h = __raw_readl(uap->port.membase + UART010_LCRH);
- 
- 		*parity = 'n';
- 		if (lcr_h & UART01x_LCRH_PEN) {
-@@ -620,8 +619,8 @@ pl010_console_get_options(struct uart_am
- 		else
- 			*bits = 8;
- 
--		quot = readb(uap->port.membase + UART010_LCRL) |
--		       readb(uap->port.membase + UART010_LCRM) << 8;
-+		quot = __raw_readl(uap->port.membase + UART010_LCRL) |
-+		       __raw_readl(uap->port.membase + UART010_LCRM) << 8;
- 		*baud = uap->port.uartclk / (16 * (quot + 1));
- 	}
- }
-@@ -639,7 +638,7 @@ static int __init pl010_console_setup(st
- 	 * if so, search for the first available port that does have
- 	 * console support.
- 	 */
--	if (co->index >= UART_NR)
-+	if (co->index >= SERIAL_AMBA_NR)
- 		co->index = 0;
- 	uap = amba_ports[co->index];
- 	if (!uap)
-@@ -657,7 +656,7 @@ static int __init pl010_console_setup(st
- 
- static struct uart_driver amba_reg;
- static struct console amba_console = {
--	.name		= "ttyAM",
-+	.name		= SERIAL_AMBA_NAME,
- 	.write		= pl010_console_write,
- 	.device		= uart_console_device,
- 	.setup		= pl010_console_setup,
-@@ -673,11 +672,11 @@ static struct console amba_console = {
- 
- static struct uart_driver amba_reg = {
- 	.owner			= THIS_MODULE,
--	.driver_name		= "ttyAM",
--	.dev_name		= "ttyAM",
-+	.driver_name		= SERIAL_AMBA_NAME,
-+	.dev_name		= SERIAL_AMBA_NAME,
- 	.major			= SERIAL_AMBA_MAJOR,
- 	.minor			= SERIAL_AMBA_MINOR,
--	.nr			= UART_NR,
-+	.nr			= SERIAL_AMBA_NR,
- 	.cons			= AMBA_CONSOLE,
- };
- 
---- a/drivers/serial/Kconfig
-+++ b/drivers/serial/Kconfig
-@@ -284,10 +284,25 @@ config SERIAL_AMBA_PL010
- 	help
- 	  This selects the ARM(R) AMBA(R) PrimeCell PL010 UART.  If you have
- 	  an Integrator/AP or Integrator/PP2 platform, or if you have a
--	  Cirrus Logic EP93xx CPU, say Y or M here.
-+	  Cirrus Logic EP93xx CPU or an Infineon ADM5120 SOC, say Y or M here.
- 
- 	  If unsure, say N.
- 
-+config SERIAL_AMBA_PL010_NUMPORTS
-+	int "Maximum number of AMBA PL010 serial ports"
-+	depends on SERIAL_AMBA_PL010
-+	default "8"
-+	---help---
-+	  Set this to the number of serial ports you want the AMBA PL010 driver
-+	  to support.
-+
-+config SERIAL_AMBA_PL010_PORTNAME
-+	string "Name of the AMBA PL010 serial ports"
-+	depends on SERIAL_AMBA_PL010
-+	default "ttyAM"
-+	---help---
-+	  ::: To be written :::
-+
- config SERIAL_AMBA_PL010_CONSOLE
- 	bool "Support for console on AMBA serial port"
- 	depends on SERIAL_AMBA_PL010=y

target/linux/adm5120/patches-2.6.34/201-amba_bus_hacks.patch

@@ -1,13 +0,0 @@
---- a/drivers/amba/bus.c
-+++ b/drivers/amba/bus.c
-@@ -18,6 +18,10 @@
- #include <asm/irq.h>
- #include <asm/sizes.h>
- 
-+#ifndef NO_IRQ
-+#define NO_IRQ		(-1)
-+#endif
-+
- #define to_amba_device(d)	container_of(d, struct amba_device, dev)
- #define to_amba_driver(d)	container_of(d, struct amba_driver, drv)
- 

target/linux/adm5120/patches-2.6.34/203-gpio_leds_brightness.patch

@@ -1,27 +0,0 @@
---- a/drivers/leds/leds-gpio.c
-+++ b/drivers/leds/leds-gpio.c
-@@ -45,13 +45,17 @@ static void gpio_led_set(struct led_clas
- 		container_of(led_cdev, struct gpio_led_data, cdev);
- 	int level;
- 
--	if (value == LED_OFF)
--		level = 0;
--	else
--		level = 1;
--
--	if (led_dat->active_low)
--		level = !level;
-+	switch (value) {
-+	case LED_OFF:
-+		level = led_dat->active_low ? 1 : 0;
-+		break;
-+	case LED_FULL:
-+		level = led_dat->active_low ? 0 : 1;
-+		break;
-+	default:
-+		level = value;
-+		break;
-+	}
- 
- 	/* Setting GPIOs with I2C/etc requires a task context, and we don't
- 	 * seem to have a reliable way to know if we're already in one; so

target/linux/adm5120/patches-2.6.34/310-adm5120_wdt.patch

@@ -1,31 +0,0 @@
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -807,6 +807,18 @@ config RC32434_WDT
- 	  To compile this driver as a module, choose M here: the
- 	  module will be called rc32434_wdt.
- 
-+config ADM5120_WDT
-+	tristate "Infineon ADM5120 SoC hardware watchdog"
-+	depends on WATCHDOG && ADM5120
-+	help
-+	  This is a driver for hardware watchdog integrated in Infineon
-+	  ADM5120 SoC. This watchdog simply watches your kernel to make sure
-+	  it doesn't freeze, and if it does, it reboots your computer after a
-+	  certain amount of time.
-+
-+	  To compile this driver as a module, choose M here: the module will be
-+	  called adm5120_wdt.
-+
- config INDYDOG
- 	tristate "Indy/I2 Hardware Watchdog"
- 	depends on SGI_HAS_INDYDOG
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -113,6 +113,7 @@ obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt
- obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
- obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
- obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
-+obj-$(CONFIG_ADM5120_WDT) += adm5120_wdt.o
- 
- # PARISC Architecture
- 

target/linux/adm5120/patches-2.6.34/901-adm5120-usb-fix-compiler-warning.patch

@@ -1,11 +0,0 @@
---- a/drivers/usb/host/adm5120-dbg.c
-+++ b/drivers/usb/host/adm5120-dbg.c
-@@ -133,7 +133,7 @@ urb_print(struct admhcd *ahcd, struct ur
- 
- #define admhc_dbg_sw(ahcd, next, size, format, arg...) \
- 	do { \
--	if (next) { \
-+	if (next != NULL) { \
- 		unsigned s_len; \
- 		s_len = scnprintf(*next, *size, format, ## arg ); \
- 		*size -= s_len; *next += s_len; \

target/linux/adm5120/patches-2.6.34/902-adm5120-usb-remove-dev-power-power_state.patch

@@ -1,11 +0,0 @@
---- a/drivers/usb/host/adm5120-dbg.c
-+++ b/drivers/usb/host/adm5120-dbg.c
-@@ -642,7 +642,7 @@ static ssize_t fill_registers_buffer(str
- 		hcd->product_desc,
- 		hcd_name);
- 
--	if (bus->controller->power.power_state.event) {
-+	if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
- 		size -= scnprintf(next, size,
- 			"SUSPENDED (no register access)\n");
- 		goto done;

target/linux/adm5120/patches-2.6.34/903-adm5120-usb-use-the-admhcd-structure-directly-in-debugfs-files.patch

@@ -1,116 +0,0 @@
---- a/drivers/usb/host/adm5120-dbg.c
-+++ b/drivers/usb/host/adm5120-dbg.c
-@@ -419,7 +419,7 @@ static struct dentry *admhc_debug_root;
- 
- struct debug_buffer {
- 	ssize_t (*fill_func)(struct debug_buffer *);    /* fill method */
--	struct device *dev;
-+	struct admhcd *ahcd;
- 	struct mutex mutex;     /* protect filling of buffer */
- 	size_t count;           /* number of characters filled into buffer */
- 	char *page;
-@@ -494,15 +494,11 @@ show_list(struct admhcd *ahcd, char *buf
- 
- static ssize_t fill_async_buffer(struct debug_buffer *buf)
- {
--	struct usb_bus		*bus;
--	struct usb_hcd		*hcd;
- 	struct admhcd		*ahcd;
- 	size_t			temp;
- 	unsigned long		flags;
- 
--	bus = dev_get_drvdata(buf->dev);
--	hcd = bus_to_hcd(bus);
--	ahcd = hcd_to_admhcd(hcd);
-+	ahcd = buf->ahcd;
- 
- 	spin_lock_irqsave(&ahcd->lock, flags);
- 	temp = show_list(ahcd, buf->page, PAGE_SIZE, ahcd->ed_head);
-@@ -516,8 +512,6 @@ static ssize_t fill_async_buffer(struct
- 
- static ssize_t fill_periodic_buffer(struct debug_buffer *buf)
- {
--	struct usb_bus		*bus;
--	struct usb_hcd		*hcd;
- 	struct admhcd		*ahcd;
- 	struct ed		**seen, *ed;
- 	unsigned long		flags;
-@@ -529,9 +523,7 @@ static ssize_t fill_periodic_buffer(stru
- 		return 0;
- 	seen_count = 0;
- 
--	bus = dev_get_drvdata(buf->dev);
--	hcd = bus_to_hcd(bus);
--	ahcd = hcd_to_admhcd(hcd);
-+	ahcd = buf->ahcd;
- 	next = buf->page;
- 	size = PAGE_SIZE;
- 
-@@ -613,7 +605,6 @@ static ssize_t fill_periodic_buffer(stru
- 
- static ssize_t fill_registers_buffer(struct debug_buffer *buf)
- {
--	struct usb_bus		*bus;
- 	struct usb_hcd		*hcd;
- 	struct admhcd		*ahcd;
- 	struct admhcd_regs __iomem *regs;
-@@ -622,9 +613,8 @@ static ssize_t fill_registers_buffer(str
- 	char			*next;
- 	u32			rdata;
- 
--	bus = dev_get_drvdata(buf->dev);
--	hcd = bus_to_hcd(bus);
--	ahcd = hcd_to_admhcd(hcd);
-+	ahcd = buf->ahcd;
-+	hcd = admhcd_to_hcd(ahcd);
- 	regs = ahcd->regs;
- 	next = buf->page;
- 	size = PAGE_SIZE;
-@@ -689,7 +679,7 @@ done:
- }
- 
- 
--static struct debug_buffer *alloc_buffer(struct device *dev,
-+static struct debug_buffer *alloc_buffer(struct admhcd *ahcd,
- 				ssize_t (*fill_func)(struct debug_buffer *))
- {
- 	struct debug_buffer *buf;
-@@ -697,7 +687,7 @@ static struct debug_buffer *alloc_buffer
- 	buf = kzalloc(sizeof(struct debug_buffer), GFP_KERNEL);
- 
- 	if (buf) {
--		buf->dev = dev;
-+		buf->ahcd = ahcd;
- 		buf->fill_func = fill_func;
- 		mutex_init(&buf->mutex);
- 	}
-@@ -790,26 +780,25 @@ static int debug_registers_open(struct i
- static inline void create_debug_files(struct admhcd *ahcd)
- {
- 	struct usb_bus *bus = &admhcd_to_hcd(ahcd)->self;
--	struct device *dev = bus->dev;
- 
- 	ahcd->debug_dir = debugfs_create_dir(bus->bus_name, admhc_debug_root);
- 	if (!ahcd->debug_dir)
- 		goto dir_error;
- 
- 	ahcd->debug_async = debugfs_create_file("async", S_IRUGO,
--						ahcd->debug_dir, dev,
-+						ahcd->debug_dir, ahcd,
- 						&debug_async_fops);
- 	if (!ahcd->debug_async)
- 		goto async_error;
- 
- 	ahcd->debug_periodic = debugfs_create_file("periodic", S_IRUGO,
--						ahcd->debug_dir, dev,
-+						ahcd->debug_dir, ahcd,
- 						&debug_periodic_fops);
- 	if (!ahcd->debug_periodic)
- 		goto periodic_error;
- 
- 	ahcd->debug_registers = debugfs_create_file("registers", S_IRUGO,
--						ahcd->debug_dir, dev,
-+						ahcd->debug_dir, ahcd,
- 						&debug_registers_fops);
- 	if (!ahcd->debug_registers)
- 		goto registers_error;

target/linux/adm5120/router_be/config-2.6.34

@@ -1,264 +0,0 @@
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_ADM5120=y
-CONFIG_ADM5120_ENET=y
-CONFIG_ADM5120_MACH_5GXI=y
-CONFIG_ADM5120_MACH_P_334WT=y
-CONFIG_ADM5120_MACH_P_335=y
-# CONFIG_ADM5120_OEM_CELLVISION is not set
-# CONFIG_ADM5120_OEM_COMPEX is not set
-# CONFIG_ADM5120_OEM_EDIMAX is not set
-# CONFIG_ADM5120_OEM_INFINEON is not set
-# CONFIG_ADM5120_OEM_MIKROTIK is not set
-# CONFIG_ADM5120_OEM_MOTOROLA is not set
-CONFIG_ADM5120_OEM_OSBRIDGE=y
-CONFIG_ADM5120_OEM_ZYXEL=y
-CONFIG_ADM5120_SOC_BGA=y
-CONFIG_ADM5120_WDT=y
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
-# CONFIG_AR7 is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARM_AMBA=y
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-CONFIG_BINFMT_MISC=m
-CONFIG_BITREVERSE=y
-# CONFIG_BRIDGE_IGMP_SNOOPING is not set
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-# CONFIG_CEPH_FS is not set
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-# CONFIG_CPU_LOONGSON2E is not set
-# CONFIG_CPU_LOONGSON2F is not set
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-CONFIG_CPU_MIPSR1=y
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CRYSTALHD is not set
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DECOMPRESS_LZMA=y
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEVPORT=y
-# CONFIG_DM9000 is not set
-CONFIG_DMA_NONCOHERENT=y
-# CONFIG_DT3155 is not set
-CONFIG_EARLY_PRINTK=y
-CONFIG_ELF_CORE=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_GENERIC_ACL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_IT8761E is not set
-# CONFIG_GPIO_PL061 is not set
-# CONFIG_GPIO_SCH is not set
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HAMRADIO is not set
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HID=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_INPUT=m
-# CONFIG_INPUT_GPIO_BUTTONS is not set
-# CONFIG_INPUT_YEALINK is not set
-CONFIG_IRQ_CPU=y
-CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_TRIGGER_ADM5120_SWITCH=m
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_LOGFS is not set
-CONFIG_LOONGSON_UART_BASE=y
-# CONFIG_LPC_SCH is not set
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_LOONGSON is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_MFD_TIMBERDALE is not set
-CONFIG_MII=m
-# CONFIG_MIKROTIK_RB532 is not set
-CONFIG_MIPS=y
-# CONFIG_MIPS_COBALT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MIPS_MACHINE=y
-# CONFIG_MIPS_MALTA is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_SIM is not set
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MTD_ADM5120=y
-CONFIG_MTD_BLOCK2MTD=y
-CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_TRXSPLIT=y
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_NEED_DMA_MAP_STATE=y
-# CONFIG_NET_PCI is not set
-CONFIG_NLS=m
-CONFIG_NO_HZ=y
-# CONFIG_NO_IOPORT is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_POWERTV is not set
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-# CONFIG_SCSI_DMA is not set
-CONFIG_SCSI_MOD=y
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_AMBA_PL010=y
-CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
-CONFIG_SERIAL_AMBA_PL010_NUMPORTS=2
-CONFIG_SERIAL_AMBA_PL010_PORTNAME="ttyS"
-# CONFIG_SERIAL_AMBA_PL011 is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_SERIO=y
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_SERIO_AMBAKMI is not set
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-CONFIG_SOFT_WATCHDOG=m
-# CONFIG_SWAP is not set
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_TRAD_SIGNALS=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-CONFIG_USB=m
-CONFIG_USB_ADM5120_HCD=m
-CONFIG_USB_DEBUG=y
-CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_UHCI_HCD is not set
-CONFIG_ZONE_DMA_FLAG=0

target/linux/adm5120/router_le/config-2.6.34

@@ -1,317 +0,0 @@
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_ADM5120=y
-CONFIG_ADM5120_ENET=y
-CONFIG_ADM5120_MACH_5GXI=y
-CONFIG_ADM5120_MACH_BR_6104K=y
-CONFIG_ADM5120_MACH_BR_6104KP=y
-CONFIG_ADM5120_MACH_BR_61X4WG=y
-CONFIG_ADM5120_MACH_CAS_771=y
-CONFIG_ADM5120_MACH_EASY5120P_ATA=y
-CONFIG_ADM5120_MACH_EASY5120_RT=y
-CONFIG_ADM5120_MACH_EASY5120_WVOIP=y
-CONFIG_ADM5120_MACH_EASY83000=y
-CONFIG_ADM5120_MACH_EB_214A=y
-CONFIG_ADM5120_MACH_NFS_101=y
-CONFIG_ADM5120_MACH_NP27G=y
-CONFIG_ADM5120_MACH_NP28G=y
-CONFIG_ADM5120_MACH_PMUGW=y
-CONFIG_ADM5120_MACH_RB_11X=y
-CONFIG_ADM5120_MACH_RB_133=y
-CONFIG_ADM5120_MACH_RB_133C=y
-CONFIG_ADM5120_MACH_RB_150=y
-CONFIG_ADM5120_MACH_RB_153=y
-CONFIG_ADM5120_MACH_RB_192=y
-CONFIG_ADM5120_MACH_WP54=y
-CONFIG_ADM5120_OEM_CELLVISION=y
-CONFIG_ADM5120_OEM_COMPEX=y
-CONFIG_ADM5120_OEM_EDIMAX=y
-CONFIG_ADM5120_OEM_GENERIC=y
-CONFIG_ADM5120_OEM_INFINEON=y
-CONFIG_ADM5120_OEM_MIKROTIK=y
-CONFIG_ADM5120_OEM_MOTOROLA=y
-CONFIG_ADM5120_OEM_OSBRIDGE=y
-# CONFIG_ADM5120_OEM_ZYXEL is not set
-CONFIG_ADM5120_SOC_BGA=y
-CONFIG_ADM5120_WDT=y
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
-# CONFIG_AR7 is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARM_AMBA=y
-CONFIG_ATA=m
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-CONFIG_BITREVERSE=y
-# CONFIG_BRIDGE_IGMP_SNOOPING is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-# CONFIG_CEPH_FS is not set
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,yaffs2,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-# CONFIG_CPU_BIG_ENDIAN is not set
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_LOONGSON2E is not set
-# CONFIG_CPU_LOONGSON2F is not set
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-CONFIG_CPU_MIPSR1=y
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_VR41XX is not set
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYSTALHD is not set
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_DECOMPRESS_LZMA=y
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEVPORT=y
-# CONFIG_DM9000 is not set
-CONFIG_DMA_NONCOHERENT=y
-# CONFIG_DT3155 is not set
-CONFIG_EARLY_PRINTK=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_GENERIC_ACL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_IT8761E is not set
-# CONFIG_GPIO_PL061 is not set
-# CONFIG_GPIO_SCH is not set
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HAMRADIO is not set
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HID=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
-CONFIG_HOSTAP_PCI=m
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_INPUT=m
-# CONFIG_INPUT_GPIO_BUTTONS is not set
-# CONFIG_INPUT_YEALINK is not set
-CONFIG_IRQ_CPU=y
-# CONFIG_KSZ884X_PCI is not set
-CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_TRIGGER_ADM5120_SWITCH=m
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_LIB80211=m
-CONFIG_LIB80211_CRYPT_CCMP=m
-CONFIG_LIB80211_CRYPT_TKIP=m
-CONFIG_LIB80211_CRYPT_WEP=m
-# CONFIG_LOGFS is not set
-CONFIG_LOONGSON_UART_BASE=y
-# CONFIG_LPC_SCH is not set
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_LOONGSON is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_MFD_TIMBERDALE is not set
-CONFIG_MII=m
-# CONFIG_MIKROTIK_RB532 is not set
-CONFIG_MIPS=y
-# CONFIG_MIPS_COBALT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MIPS_MACHINE=y
-# CONFIG_MIPS_MALTA is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_SIM is not set
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MTD_ADM5120=y
-CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_MYLOADER_PARTS=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_PLATFORM=y
-CONFIG_MTD_TRXSPLIT=y
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NLS=m
-CONFIG_NO_HZ=y
-# CONFIG_NO_IOPORT is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_PATA_RB153_CF=m
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_POWERTV is not set
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_SCSI=m
-CONFIG_SCSI_MOD=m
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_AMBA_PL010=y
-CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
-CONFIG_SERIAL_AMBA_PL010_NUMPORTS=2
-CONFIG_SERIAL_AMBA_PL010_PORTNAME="ttyS"
-# CONFIG_SERIAL_AMBA_PL011 is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_SERIO=y
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_SERIO_AMBAKMI is not set
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-CONFIG_SOFT_WATCHDOG=m
-# CONFIG_SWAP is not set
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-# CONFIG_TC35815 is not set
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_TRAD_SIGNALS=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-CONFIG_USB=m
-CONFIG_USB_ADM5120_HCD=m
-CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_UHCI_HCD is not set
-CONFIG_YAFFS_9BYTE_TAGS=y
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-CONFIG_YAFFS_FS=y
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
-CONFIG_YAFFS_YAFFS1=y
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_ZONE_DMA_FLAG=0

target/linux/brcm47xx/config-2.6.34

@@ -1,180 +0,0 @@
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
-# CONFIG_AR7 is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_ARPD is not set
-CONFIG_B44=y
-CONFIG_B44_PCI=y
-CONFIG_B44_PCICORE_AUTOSELECT=y
-CONFIG_B44_PCI_AUTOSELECT=y
-CONFIG_BCM47XX=y
-CONFIG_BCM47XX_WDT=y
-# CONFIG_BCM63XX is not set
-CONFIG_BITREVERSE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_BUG is not set
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CFE=y
-CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-# CONFIG_CPU_BIG_ENDIAN is not set
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_LOONGSON2E is not set
-# CONFIG_CPU_LOONGSON2F is not set
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-CONFIG_CPU_MIPSR1=y
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_VR41XX is not set
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DEVPORT=y
-# CONFIG_DM9000 is not set
-CONFIG_DMA_NONCOHERENT=y
-# CONFIG_FSNOTIFY is not set
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_IP_ROUTE_VERBOSE is not set
-CONFIG_IRQ_CPU=y
-CONFIG_KALLSYMS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LOONGSON_UART_BASE=y
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_LOONGSON is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_MIKROTIK_RB532 is not set
-CONFIG_MIPS=y
-# CONFIG_MIPS_COBALT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MACHINE is not set
-# CONFIG_MIPS_MALTA is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_SIM is not set
-CONFIG_MTD_BCM47XX=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NO_HZ=y
-# CONFIG_NO_IOPORT is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PHYLIB=y
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_POWERTV is not set
-# CONFIG_PROC_KCORE is not set
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-# CONFIG_SCSI_DMA is not set
-CONFIG_SCSI_MOD=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
-# CONFIG_SERIAL_8250_RSA is not set
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-CONFIG_SSB=y
-CONFIG_SSB_B43_PCI_BRIDGE=y
-CONFIG_SSB_BLOCKIO=y
-CONFIG_SSB_DEBUG=y
-CONFIG_SSB_DRIVER_EXTIF=y
-CONFIG_SSB_DRIVER_GIGE=y
-CONFIG_SSB_DRIVER_MIPS=y
-CONFIG_SSB_DRIVER_PCICORE=y
-CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
-CONFIG_SSB_EMBEDDED=y
-CONFIG_SSB_PCICORE_HOSTMODE=y
-CONFIG_SSB_PCIHOST=y
-CONFIG_SSB_PCIHOST_POSSIBLE=y
-CONFIG_SSB_SERIAL=y
-CONFIG_SSB_SPROM=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-# CONFIG_TC35815 is not set
-CONFIG_TRAD_SIGNALS=y
-CONFIG_USB_SUPPORT=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_ZONE_DMA_FLAG=0

target/linux/brcm47xx/patches-2.6.34/001-backport.patch

@@ -1,254 +0,0 @@
-commit 121915c4ee0812a14bc8d752bc210d0238d755c1
-Author: Waldemar Brodkorb <[email protected]>
-Date:   Tue Jun 8 19:06:01 2010 +0200
-
-    MIPS: BCM47xx: Add NVRAM support devices
-    
-    When trying to netboot a Linksys WRT54GS WLAN router, the bootup fails,
-    because of following error message:
-    
-    ...
-    [    0.424000] b44: b44.c:v2.0
-    [    0.424000] b44: Invalid MAC address found in EEPROM
-    [    0.432000] b44 ssb0:1: Problem fetching invariants of chip,aborting
-    [    0.436000] b44: probe of ssb0:1 failed with error -22
-    ...
-    
-    The router uses a CFE bootloader, but most of the needed environment
-    variables for network card initialization, are not available from CFE
-    via printenv and even though not via cfe_getenv().
-    The required environment variables are saved in a special partition
-    in flash memory. The attached patch implement nvram_getenv and enables
-    bootup via NFS root on my router.
-    
-    Most of the patch is extracted from the OpenWrt subversion repository and
-    stripped down and cleaned up to just fix this issue.
-    
-    [Ralf: sorted out header file inclusions.  Lots of unneded headers and such
-    that should have been included.]
-    
-    Signed-off-by: Waldemar Brodkorb <[email protected]>
-    Reviewed-by: Phil Sutter <[email protected]>
-    To: [email protected]
-    Cc: Hauke Mehrtens <[email protected]>
-    Patchwork: http://patchwork.linux-mips.org/patch/1359/
-    Signed-off-by: Ralf Baechle <[email protected]>
-
---- a/arch/mips/bcm47xx/Makefile
-+++ b/arch/mips/bcm47xx/Makefile
-@@ -3,4 +3,4 @@
- # under Linux.
- #
- 
--obj-y := gpio.o irq.o prom.o serial.o setup.o time.o wgt634u.o
-+obj-y := gpio.o irq.o nvram.o prom.o serial.o setup.o time.o wgt634u.o
---- /dev/null
-+++ b/arch/mips/bcm47xx/nvram.c
-@@ -0,0 +1,94 @@
-+/*
-+ * BCM947xx nvram variable access
-+ *
-+ * Copyright (C) 2005 Broadcom Corporation
-+ * Copyright (C) 2006 Felix Fietkau <[email protected]>
-+ *
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/types.h>
-+#include <linux/module.h>
-+#include <linux/ssb/ssb.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <asm/addrspace.h>
-+#include <asm/mach-bcm47xx/nvram.h>
-+#include <asm/mach-bcm47xx/bcm47xx.h>
-+
-+static char nvram_buf[NVRAM_SPACE];
-+
-+/* Probe for NVRAM header */
-+static void __init early_nvram_init(void)
-+{
-+	struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore;
-+	struct nvram_header *header;
-+	int i;
-+	u32 base, lim, off;
-+	u32 *src, *dst;
-+
-+	base = mcore->flash_window;
-+	lim = mcore->flash_window_size;
-+
-+	off = FLASH_MIN;
-+	while (off <= lim) {
-+		/* Windowed flash access */
-+		header = (struct nvram_header *)
-+			KSEG1ADDR(base + off - NVRAM_SPACE);
-+		if (header->magic == NVRAM_HEADER)
-+			goto found;
-+		off <<= 1;
-+	}
-+
-+	/* Try embedded NVRAM at 4 KB and 1 KB as last resorts */
-+	header = (struct nvram_header *) KSEG1ADDR(base + 4096);
-+	if (header->magic == NVRAM_HEADER)
-+		goto found;
-+
-+	header = (struct nvram_header *) KSEG1ADDR(base + 1024);
-+	if (header->magic == NVRAM_HEADER)
-+		goto found;
-+
-+	return;
-+
-+found:
-+	src = (u32 *) header;
-+	dst = (u32 *) nvram_buf;
-+	for (i = 0; i < sizeof(struct nvram_header); i += 4)
-+		*dst++ = *src++;
-+	for (; i < header->len && i < NVRAM_SPACE; i += 4)
-+		*dst++ = le32_to_cpu(*src++);
-+}
-+
-+int nvram_getenv(char *name, char *val, size_t val_len)
-+{
-+	char *var, *value, *end, *eq;
-+
-+	if (!name)
-+		return 1;
-+
-+	if (!nvram_buf[0])
-+		early_nvram_init();
-+
-+	/* Look for name=value and return value */
-+	var = &nvram_buf[sizeof(struct nvram_header)];
-+	end = nvram_buf + sizeof(nvram_buf) - 2;
-+	end[0] = end[1] = '\0';
-+	for (; *var; var = value + strlen(value) + 1) {
-+		eq = strchr(var, '=');
-+		if (!eq)
-+			break;
-+		value = eq + 1;
-+		if ((eq - var) == strlen(name) &&
-+			strncmp(var, name, (eq - var)) == 0) {
-+			snprintf(val, val_len, "%s", value);
-+			return 0;
-+		}
-+	}
-+	return 1;
-+}
-+EXPORT_SYMBOL(nvram_getenv);
---- a/arch/mips/bcm47xx/setup.c
-+++ b/arch/mips/bcm47xx/setup.c
-@@ -1,8 +1,8 @@
- /*
-  *  Copyright (C) 2004 Florian Schirmer <[email protected]>
-- *  Copyright (C) 2005 Waldemar Brodkorb <[email protected]>
-  *  Copyright (C) 2006 Felix Fietkau <[email protected]>
-  *  Copyright (C) 2006 Michael Buesch <[email protected]>
-+ *  Copyright (C) 2010 Waldemar Brodkorb <[email protected]>
-  *
-  *  This program is free software; you can redistribute  it and/or modify it
-  *  under  the terms of  the GNU General  Public License as published by the
-@@ -33,6 +33,7 @@
- #include <asm/time.h>
- #include <bcm47xx.h>
- #include <asm/fw/cfe/cfe_api.h>
-+#include <asm/mach-bcm47xx/nvram.h>
- 
- struct ssb_bus ssb_bcm47xx;
- EXPORT_SYMBOL(ssb_bcm47xx);
-@@ -81,28 +82,42 @@ static int bcm47xx_get_invariants(struct
- 	/* Fill boardinfo structure */
- 	memset(&(iv->boardinfo), 0 , sizeof(struct ssb_boardinfo));
- 
--	if (cfe_getenv("boardvendor", buf, sizeof(buf)) >= 0)
-+	if (cfe_getenv("boardvendor", buf, sizeof(buf)) >= 0 ||
-+	    nvram_getenv("boardvendor", buf, sizeof(buf)) >= 0)
- 		iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
--	if (cfe_getenv("boardtype", buf, sizeof(buf)) >= 0)
-+	if (cfe_getenv("boardtype", buf, sizeof(buf)) >= 0 ||
-+	    nvram_getenv("boardtype", buf, sizeof(buf)) >= 0)
- 		iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
--	if (cfe_getenv("boardrev", buf, sizeof(buf)) >= 0)
-+	if (cfe_getenv("boardrev", buf, sizeof(buf)) >= 0 ||
-+	    nvram_getenv("boardrev", buf, sizeof(buf)) >= 0)
- 		iv->boardinfo.rev = (u16)simple_strtoul(buf, NULL, 0);
- 
- 	/* Fill sprom structure */
- 	memset(&(iv->sprom), 0, sizeof(struct ssb_sprom));
- 	iv->sprom.revision = 3;
- 
--	if (cfe_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
-+	if (cfe_getenv("et0macaddr", buf, sizeof(buf)) >= 0 ||
-+	    nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
- 		str2eaddr(buf, iv->sprom.et0mac);
--	if (cfe_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
-+
-+	if (cfe_getenv("et1macaddr", buf, sizeof(buf)) >= 0 ||
-+	    nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
- 		str2eaddr(buf, iv->sprom.et1mac);
--	if (cfe_getenv("et0phyaddr", buf, sizeof(buf)) >= 0)
--		iv->sprom.et0phyaddr = simple_strtoul(buf, NULL, 10);
--	if (cfe_getenv("et1phyaddr", buf, sizeof(buf)) >= 0)
--		iv->sprom.et1phyaddr = simple_strtoul(buf, NULL, 10);
--	if (cfe_getenv("et0mdcport", buf, sizeof(buf)) >= 0)
-+
-+	if (cfe_getenv("et0phyaddr", buf, sizeof(buf)) >= 0 ||
-+	    nvram_getenv("et0phyaddr", buf, sizeof(buf)) >= 0)
-+		iv->sprom.et0phyaddr = simple_strtoul(buf, NULL, 0);
-+
-+	if (cfe_getenv("et1phyaddr", buf, sizeof(buf)) >= 0 ||
-+	    nvram_getenv("et1phyaddr", buf, sizeof(buf)) >= 0)
-+		iv->sprom.et1phyaddr = simple_strtoul(buf, NULL, 0);
-+
-+	if (cfe_getenv("et0mdcport", buf, sizeof(buf)) >= 0 ||
-+	    nvram_getenv("et0mdcport", buf, sizeof(buf)) >= 0)
- 		iv->sprom.et0mdcport = simple_strtoul(buf, NULL, 10);
--	if (cfe_getenv("et1mdcport", buf, sizeof(buf)) >= 0)
-+
-+	if (cfe_getenv("et1mdcport", buf, sizeof(buf)) >= 0 ||
-+	    nvram_getenv("et1mdcport", buf, sizeof(buf)) >= 0)
- 		iv->sprom.et1mdcport = simple_strtoul(buf, NULL, 10);
- 
- 	return 0;
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm47xx/nvram.h
-@@ -0,0 +1,36 @@
-+/*
-+ *  Copyright (C) 2005, Broadcom Corporation
-+ *  Copyright (C) 2006, Felix Fietkau <[email protected]>
-+ *
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ */
-+
-+#ifndef __NVRAM_H
-+#define __NVRAM_H
-+
-+#include <linux/types.h>
-+
-+struct nvram_header {
-+	u32 magic;
-+	u32 len;
-+	u32 crc_ver_init;	/* 0:7 crc, 8:15 ver, 16:31 sdram_init */
-+	u32 config_refresh;	/* 0:15 sdram_config, 16:31 sdram_refresh */
-+	u32 config_ncdl;	/* ncdl values for memc */
-+};
-+
-+#define NVRAM_HEADER		0x48534C46	/* 'FLSH' */
-+#define NVRAM_VERSION		1
-+#define NVRAM_HEADER_SIZE	20
-+#define NVRAM_SPACE		0x8000
-+
-+#define FLASH_MIN		0x00020000	/* Minimum flash size */
-+
-+#define NVRAM_MAX_VALUE_LEN 255
-+#define NVRAM_MAX_PARAM_LEN 64
-+
-+extern int nvram_getenv(char *name, char *val, size_t val_len);
-+
-+#endif

target/linux/brcm47xx/patches-2.6.34/011-MIPS-BCM47xx-Really-fix-128MB-RAM-problem.patch

@@ -1,66 +0,0 @@
-From f65eb52ea6c0ec939fd44e74b6b873e0b549e3c9 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <[email protected]>
-Date: Sun, 18 Jul 2010 12:49:41 +0200
-Subject: [PATCH 1/6] MIPS: BCM47xx: Really fix 128MB RAM problem
-
-The previews patch 84a6fcb368a080620d12fc4d79e07902dbee7335 was wrong,
-I got wrong success reports.
-
-The bcm47xx architecture maps the ram into a 128MB address space. It
-will be paced there as often as goes into the 128MB. The detection
-tries to find the position where the same memory is found. When reading
-over 128MB the processor will throw an exception. If 128MB ram is
-installed, it will not find the same memory because it tries to read
-over the 128MB boarder. Now it just assumes 128MB installed ram if it
-can not find that the ram is repeating.
-
-Signed-off-by: Hauke Mehrtens <[email protected]>
----
- arch/mips/bcm47xx/prom.c |   22 ++++++++++++++--------
- 1 files changed, 14 insertions(+), 8 deletions(-)
-
---- a/arch/mips/bcm47xx/prom.c
-+++ b/arch/mips/bcm47xx/prom.c
-@@ -126,6 +126,7 @@ static __init void prom_init_cmdline(voi
- static __init void prom_init_mem(void)
- {
- 	unsigned long mem;
-+	unsigned long max;
- 
- 	/* Figure out memory size by finding aliases.
- 	 *
-@@ -134,21 +135,26 @@ static __init void prom_init_mem(void)
- 	 * want to reuse the memory used by CFE (around 4MB). That means cfe_*
- 	 * functions stop to work at some point during the boot, we should only
- 	 * call them at the beginning of the boot.
-+	 *
-+	 * BCM47XX uses 128MB for addressing the ram, if the system contains
-+	 * less that that amount of ram it remaps the ram more often into the
-+	 * available space.
-+	 * Accessing memory after 128MB will cause an exception.
-+	 * max contains the biggest possible address supported by the platform.
-+	 * If the method wants to try something above we assume 128MB ram.
- 	 */
-+	max = ((unsigned long)(prom_init) | ((128 << 20) - 1));
- 	for (mem = (1 << 20); mem < (128 << 20); mem += (1 << 20)) {
-+		if (((unsigned long)(prom_init) + mem) > max) {
-+			mem = (128 << 20);
-+			printk(KERN_DEBUG "assume 128MB RAM\n");
-+			break;
-+		}
- 		if (*(unsigned long *)((unsigned long)(prom_init) + mem) ==
- 		    *(unsigned long *)(prom_init))
- 			break;
- 	}
- 
--	/* Ignoring the last page when ddr size is 128M. Cached
--	 * accesses to last page is causing the processor to prefetch
--	 * using address above 128M stepping out of the ddr address
--	 * space.
--	 */
--	if (mem == 0x8000000)
--		mem -= 0x1000;
--
- 	add_memory_region(0, mem, BOOT_MEM_RAM);
- }
- 

target/linux/brcm47xx/patches-2.6.34/012-MIPS-BCM47xx-Fill-values-for-b43-into-ssb-sprom.patch

@@ -1,170 +0,0 @@
-From e5c5828063a55a752e2392d820383dd7a5da3737 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <[email protected]>
-Date: Sun, 18 Jul 2010 13:34:32 +0200
-Subject: [PATCH 2/6] MIPS: BCM47xx: Fill values for b43 into ssb sprom
-
-Most of the values are stored in the nvram and not in the CFE. At first
-the nvram should be read and if there is no value it should look into
-the CFE. Now more values are read out because the b43 and b43legacy
-drivers needs them.
-
-Some parts of this patch have been in OpenWRT for a long time and were
-made by Michael Buesch.
-
-Signed-off-by: Hauke Mehrtens <[email protected]>
----
- arch/mips/bcm47xx/setup.c |  131 +++++++++++++++++++++++++++++++++-----------
- 1 files changed, 98 insertions(+), 33 deletions(-)
-
---- a/arch/mips/bcm47xx/setup.c
-+++ b/arch/mips/bcm47xx/setup.c
-@@ -74,6 +74,95 @@ static void str2eaddr(char *str, char *d
- 	}
- }
- 
-+#define READ_FROM_NVRAM(_outvar, name, buf) \
-+	if (nvram_getenv(name, buf, sizeof(buf)) >= 0 || \
-+	    cfe_getenv(name, buf, sizeof(buf)) >= 0) \
-+		sprom->_outvar = simple_strtoul(buf, NULL, 0);
-+
-+static void bcm47xx_fill_sprom(struct ssb_sprom *sprom)
-+{
-+	char buf[100];
-+	u32 boardflags;
-+
-+	memset(sprom, 0, sizeof(struct ssb_sprom));
-+
-+	sprom->revision = 1; /* Fallback: Old hardware does not define this. */
-+	READ_FROM_NVRAM(revision, "sromrev", buf);
-+	if (nvram_getenv("il0macaddr", buf, sizeof(buf)) >= 0 ||
-+	    cfe_getenv("il0macaddr", buf, sizeof(buf)) >= 0)
-+		str2eaddr(buf, sprom->il0mac);
-+	if (nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0 ||
-+	    cfe_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
-+		str2eaddr(buf, sprom->et0mac);
-+	if (nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0 ||
-+	    cfe_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
-+		str2eaddr(buf, sprom->et1mac);
-+	READ_FROM_NVRAM(et0phyaddr, "et0phyaddr", buf);
-+	READ_FROM_NVRAM(et1phyaddr, "et1phyaddr", buf);
-+	READ_FROM_NVRAM(et0mdcport, "et0mdcport", buf);
-+	READ_FROM_NVRAM(et1mdcport, "et1mdcport", buf);
-+	READ_FROM_NVRAM(board_rev, "boardrev", buf);
-+	READ_FROM_NVRAM(country_code, "ccode", buf);
-+	READ_FROM_NVRAM(ant_available_a, "aa5g", buf);
-+	READ_FROM_NVRAM(ant_available_bg, "aa2g", buf);
-+	READ_FROM_NVRAM(pa0b0, "pa0b0", buf);
-+	READ_FROM_NVRAM(pa0b1, "pa0b1", buf);
-+	READ_FROM_NVRAM(pa0b2, "pa0b2", buf);
-+	READ_FROM_NVRAM(pa1b0, "pa1b0", buf);
-+	READ_FROM_NVRAM(pa1b1, "pa1b1", buf);
-+	READ_FROM_NVRAM(pa1b2, "pa1b2", buf);
-+	READ_FROM_NVRAM(pa1lob0, "pa1lob0", buf);
-+	READ_FROM_NVRAM(pa1lob2, "pa1lob1", buf);
-+	READ_FROM_NVRAM(pa1lob1, "pa1lob2", buf);
-+	READ_FROM_NVRAM(pa1hib0, "pa1hib0", buf);
-+	READ_FROM_NVRAM(pa1hib2, "pa1hib1", buf);
-+	READ_FROM_NVRAM(pa1hib1, "pa1hib2", buf);
-+	READ_FROM_NVRAM(gpio0, "wl0gpio0", buf);
-+	READ_FROM_NVRAM(gpio1, "wl0gpio1", buf);
-+	READ_FROM_NVRAM(gpio2, "wl0gpio2", buf);
-+	READ_FROM_NVRAM(gpio3, "wl0gpio3", buf);
-+	READ_FROM_NVRAM(maxpwr_bg, "pa0maxpwr", buf);
-+	READ_FROM_NVRAM(maxpwr_al, "pa1lomaxpwr", buf);
-+	READ_FROM_NVRAM(maxpwr_a, "pa1maxpwr", buf);
-+	READ_FROM_NVRAM(maxpwr_ah, "pa1himaxpwr", buf);
-+	READ_FROM_NVRAM(itssi_a, "pa1itssit", buf);
-+	READ_FROM_NVRAM(itssi_bg, "pa0itssit", buf);
-+	READ_FROM_NVRAM(tri2g, "tri2g", buf);
-+	READ_FROM_NVRAM(tri5gl, "tri5gl", buf);
-+	READ_FROM_NVRAM(tri5g, "tri5g", buf);
-+	READ_FROM_NVRAM(tri5gh, "tri5gh", buf);
-+	READ_FROM_NVRAM(rxpo2g, "rxpo2g", buf);
-+	READ_FROM_NVRAM(rxpo5g, "rxpo5g", buf);
-+	READ_FROM_NVRAM(rssisav2g, "rssisav2g", buf);
-+	READ_FROM_NVRAM(rssismc2g, "rssismc2g", buf);
-+	READ_FROM_NVRAM(rssismf2g, "rssismf2g", buf);
-+	READ_FROM_NVRAM(bxa2g, "bxa2g", buf);
-+	READ_FROM_NVRAM(rssisav5g, "rssisav5g", buf);
-+	READ_FROM_NVRAM(rssismc5g, "rssismc5g", buf);
-+	READ_FROM_NVRAM(rssismf5g, "rssismf5g", buf);
-+	READ_FROM_NVRAM(bxa5g, "bxa5g", buf);
-+	READ_FROM_NVRAM(cck2gpo, "cck2gpo", buf);
-+	READ_FROM_NVRAM(ofdm2gpo, "ofdm2gpo", buf);
-+	READ_FROM_NVRAM(ofdm5glpo, "ofdm5glpo", buf);
-+	READ_FROM_NVRAM(ofdm5gpo, "ofdm5gpo", buf);
-+	READ_FROM_NVRAM(ofdm5ghpo, "ofdm5ghpo", buf);
-+
-+	if (nvram_getenv("boardflags", buf, sizeof(buf)) >= 0 ||
-+	    cfe_getenv("boardflags", buf, sizeof(buf)) >= 0)
-+		boardflags = simple_strtoul(buf, NULL, 0);
-+	if (boardflags) {
-+		sprom->boardflags_lo = (boardflags & 0x0000FFFFU);
-+		sprom->boardflags_hi = (boardflags & 0xFFFF0000U) >> 16;
-+	}
-+	if (nvram_getenv("boardflags2", buf, sizeof(buf)) >= 0 ||
-+	    cfe_getenv("boardflags2", buf, sizeof(buf)) >= 0)
-+		boardflags = simple_strtoul(buf, NULL, 0);
-+	if (boardflags) {
-+		sprom->boardflags2_lo = (boardflags & 0x0000FFFFU);
-+		sprom->boardflags2_hi = (boardflags & 0xFFFF0000U) >> 16;
-+	}
-+}
-+
- static int bcm47xx_get_invariants(struct ssb_bus *bus,
- 				   struct ssb_init_invariants *iv)
- {
-@@ -82,43 +171,19 @@ static int bcm47xx_get_invariants(struct
- 	/* Fill boardinfo structure */
- 	memset(&(iv->boardinfo), 0 , sizeof(struct ssb_boardinfo));
- 
--	if (cfe_getenv("boardvendor", buf, sizeof(buf)) >= 0 ||
--	    nvram_getenv("boardvendor", buf, sizeof(buf)) >= 0)
-+	iv->boardinfo.vendor = SSB_BOARDVENDOR_BCM;
-+	if (nvram_getenv("boardtype", buf, sizeof(buf)) >= 0 ||
-+	    cfe_getenv("boardtype", buf, sizeof(buf)) >= 0)
- 		iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
--	if (cfe_getenv("boardtype", buf, sizeof(buf)) >= 0 ||
--	    nvram_getenv("boardtype", buf, sizeof(buf)) >= 0)
--		iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
--	if (cfe_getenv("boardrev", buf, sizeof(buf)) >= 0 ||
--	    nvram_getenv("boardrev", buf, sizeof(buf)) >= 0)
-+	if (nvram_getenv("boardrev", buf, sizeof(buf)) >= 0 ||
-+	    cfe_getenv("boardrev", buf, sizeof(buf)) >= 0)
- 		iv->boardinfo.rev = (u16)simple_strtoul(buf, NULL, 0);
- 
--	/* Fill sprom structure */
--	memset(&(iv->sprom), 0, sizeof(struct ssb_sprom));
--	iv->sprom.revision = 3;
--
--	if (cfe_getenv("et0macaddr", buf, sizeof(buf)) >= 0 ||
--	    nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
--		str2eaddr(buf, iv->sprom.et0mac);
--
--	if (cfe_getenv("et1macaddr", buf, sizeof(buf)) >= 0 ||
--	    nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
--		str2eaddr(buf, iv->sprom.et1mac);
--
--	if (cfe_getenv("et0phyaddr", buf, sizeof(buf)) >= 0 ||
--	    nvram_getenv("et0phyaddr", buf, sizeof(buf)) >= 0)
--		iv->sprom.et0phyaddr = simple_strtoul(buf, NULL, 0);
--
--	if (cfe_getenv("et1phyaddr", buf, sizeof(buf)) >= 0 ||
--	    nvram_getenv("et1phyaddr", buf, sizeof(buf)) >= 0)
--		iv->sprom.et1phyaddr = simple_strtoul(buf, NULL, 0);
--
--	if (cfe_getenv("et0mdcport", buf, sizeof(buf)) >= 0 ||
--	    nvram_getenv("et0mdcport", buf, sizeof(buf)) >= 0)
--		iv->sprom.et0mdcport = simple_strtoul(buf, NULL, 10);
--
--	if (cfe_getenv("et1mdcport", buf, sizeof(buf)) >= 0 ||
--	    nvram_getenv("et1mdcport", buf, sizeof(buf)) >= 0)
--		iv->sprom.et1mdcport = simple_strtoul(buf, NULL, 10);
-+	bcm47xx_fill_sprom(&iv->sprom);
-+
-+	if (nvram_getenv("cardbus", buf, sizeof(buf)) >= 0 ||
-+	    cfe_getenv("cardbus", buf, sizeof(buf)) >= 0)
-+		iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10);
- 
- 	return 0;
- }

target/linux/brcm47xx/patches-2.6.34/013-MIPS-BCM47xx-Activate-SSB_B43_PCI_BRIDGE-by-default.patch

@@ -1,23 +0,0 @@
-From e0039e622e53a22b14fce4d2f0cb3febc75cd58b Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <[email protected]>
-Date: Sun, 18 Jul 2010 13:58:09 +0200
-Subject: [PATCH 3/6] MIPS: BCM47xx: Activate SSB_B43_PCI_BRIDGE by default
-
-The b43_pci_bridge is needed to use the b43 driver with brcm47xx.
-Activate it by default if pci is available.
-
-Signed-off-by: Hauke Mehrtens <[email protected]>
----
- arch/mips/Kconfig |    1 +
- 1 files changed, 1 insertions(+), 0 deletions(-)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -62,6 +62,7 @@ config BCM47XX
- 	select SSB_DRIVER_MIPS
- 	select SSB_DRIVER_EXTIF
- 	select SSB_EMBEDDED
-+	select SSB_B43_PCI_BRIDGE if PCI
- 	select SSB_PCICORE_HOSTMODE if PCI
- 	select GENERIC_GPIO
- 	select SYS_HAS_EARLY_PRINTK

target/linux/brcm47xx/patches-2.6.34/014-MIPS-BCM47xx-Setup-and-register-serial-early.patch

@@ -1,75 +0,0 @@
-From 9be402f069cc259ad5795b77567d66c4e7f6bef6 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <[email protected]>
-Date: Sun, 18 Jul 2010 14:59:24 +0200
-Subject: [PATCH 4/6] MIPS: BCM47xx: Setup and register serial early
-
-Swap the first and second serial if console=ttyS1 was set.
-Set it up and register it for early serial support.
-
-This patch has been in OpenWRT for a long time.
-
-Signed-off-by: Hauke Mehrtens <[email protected]>
----
- arch/mips/bcm47xx/setup.c |   39 ++++++++++++++++++++++++++++++++++++++-
- 1 files changed, 38 insertions(+), 1 deletions(-)
-
---- a/arch/mips/bcm47xx/setup.c
-+++ b/arch/mips/bcm47xx/setup.c
-@@ -28,6 +28,8 @@
- #include <linux/types.h>
- #include <linux/ssb/ssb.h>
- #include <linux/ssb/ssb_embedded.h>
-+#include <linux/serial.h>
-+#include <linux/serial_8250.h>
- #include <asm/bootinfo.h>
- #include <asm/reboot.h>
- #include <asm/time.h>
-@@ -190,12 +192,47 @@ static int bcm47xx_get_invariants(struct
- 
- void __init plat_mem_setup(void)
- {
--	int err;
-+	int i, err;
-+	char buf[100];
-+	struct ssb_mipscore *mcore;
- 
- 	err = ssb_bus_ssbbus_register(&ssb_bcm47xx, SSB_ENUM_BASE,
- 				      bcm47xx_get_invariants);
- 	if (err)
- 		panic("Failed to initialize SSB bus (err %d)\n", err);
-+	mcore = &ssb_bcm47xx.mipscore;
-+
-+	if (nvram_getenv("kernel_args", buf, sizeof(buf)) >= 0 ||
-+	    cfe_getenv("kernel_args", buf, sizeof(buf)) >= 0) {
-+		if (strstr(buf, "console=ttyS1")) {
-+			struct ssb_serial_port port;
-+
-+			printk(KERN_DEBUG "Swapping serial ports!\n");
-+			/* swap serial ports */
-+			memcpy(&port, &mcore->serial_ports[0], sizeof(port));
-+			memcpy(&mcore->serial_ports[0], &mcore->serial_ports[1],
-+			       sizeof(port));
-+			memcpy(&mcore->serial_ports[1], &port, sizeof(port));
-+		}
-+	}
-+
-+	for (i = 0; i < mcore->nr_serial_ports; i++) {
-+		struct ssb_serial_port *port = &(mcore->serial_ports[i]);
-+		struct uart_port s;
-+
-+		memset(&s, 0, sizeof(s));
-+		s.line = i;
-+		s.mapbase = (unsigned int) port->regs;
-+		s.membase = port->regs;
-+		s.irq = port->irq + 2;
-+		s.uartclk = port->baud_base;
-+		s.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
-+		s.iotype = SERIAL_IO_MEM;
-+		s.regshift = port->reg_shift;
-+
-+		early_serial_setup(&s);
-+	}
-+	printk(KERN_DEBUG "Serial init done.\n");
- 
- 	_machine_restart = bcm47xx_machine_restart;
- 	_machine_halt = bcm47xx_machine_halt;

target/linux/brcm47xx/patches-2.6.34/015-MIPS-BCM47xx-nvram_getenv-fix-return-value.patch

@@ -1,47 +0,0 @@
-From ff7295cc37b1e4b31aed9f071374f43aa128329b Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <[email protected]>
-Date: Fri, 30 Jul 2010 17:45:20 +0200
-Subject: [PATCH 5/6] MIPS: BCM47xx: nvram_getenv fix return value.
-
-nvram_getenv should behave like cfe_getenv. For now it is used like
-cfe_getenv. cfe_getenv returns 0 on success and -1 in case of an error.
-Change nvram_getenv to do the same.
-
-Signed-off-by: Hauke Mehrtens <[email protected]>
----
- arch/mips/bcm47xx/nvram.c                  |    4 ++--
- arch/mips/include/asm/mach-bcm47xx/nvram.h |    3 +++
- 2 files changed, 5 insertions(+), 2 deletions(-)
-
---- a/arch/mips/bcm47xx/nvram.c
-+++ b/arch/mips/bcm47xx/nvram.c
-@@ -69,7 +69,7 @@ int nvram_getenv(char *name, char *val,
- 	char *var, *value, *end, *eq;
- 
- 	if (!name)
--		return 1;
-+		return NVRAM_ERR_INV_PARAM;
- 
- 	if (!nvram_buf[0])
- 		early_nvram_init();
-@@ -89,6 +89,6 @@ int nvram_getenv(char *name, char *val,
- 			return 0;
- 		}
- 	}
--	return 1;
-+	return NVRAM_ERR_ENVNOTFOUND;
- }
- EXPORT_SYMBOL(nvram_getenv);
---- a/arch/mips/include/asm/mach-bcm47xx/nvram.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/nvram.h
-@@ -31,6 +31,10 @@ struct nvram_header {
- #define NVRAM_MAX_VALUE_LEN 255
- #define NVRAM_MAX_PARAM_LEN 64
- 
-+// TODO: replace by old values. This chaueses that the system will not try to look into the cfe.
-+#define NVRAM_ERR_INV_PARAM	1 // -8
-+#define NVRAM_ERR_ENVNOTFOUND	1 // -9
-+
- extern int nvram_getenv(char *name, char *val, size_t val_len);
- 
- #endif

target/linux/brcm47xx/patches-2.6.34/016-MIPS-BCM47xx-Remove-CFE-console.patch

@@ -1,141 +0,0 @@
-From 5219981646071abb6731634bf47781a53e248764 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <[email protected]>
-Date: Sun, 18 Jul 2010 15:11:26 +0200
-Subject: [PATCH 6/6] MIPS: BCM47xx: Remove CFE console
-
-Do not use the CFE console. It causes hangs on some devices like the
-Buffalo WHR-HP-G54.
-This was reported in https://dev.openwrt.org/ticket/4061 and
-https://forum.openwrt.org/viewtopic.php?id=17063
-
-Signed-off-by: Hauke Mehrtens <[email protected]>
----
- arch/mips/Kconfig        |    1 -
- arch/mips/bcm47xx/prom.c |   82 +++------------------------------------------
- 2 files changed, 6 insertions(+), 77 deletions(-)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -65,7 +65,6 @@ config BCM47XX
- 	select SSB_B43_PCI_BRIDGE if PCI
- 	select SSB_PCICORE_HOSTMODE if PCI
- 	select GENERIC_GPIO
--	select SYS_HAS_EARLY_PRINTK
- 	select CFE
- 	help
- 	 Support for BCM47XX based boards
---- a/arch/mips/bcm47xx/prom.c
-+++ b/arch/mips/bcm47xx/prom.c
-@@ -31,96 +31,28 @@
- #include <asm/fw/cfe/cfe_api.h>
- #include <asm/fw/cfe/cfe_error.h>
- 
--static int cfe_cons_handle;
--
- const char *get_system_type(void)
- {
- 	return "Broadcom BCM47XX";
- }
- 
--void prom_putchar(char c)
--{
--	while (cfe_write(cfe_cons_handle, &c, 1) == 0)
--		;
--}
--
--static __init void prom_init_cfe(void)
-+static __init int prom_init_cfe(void)
- {
- 	uint32_t cfe_ept;
- 	uint32_t cfe_handle;
- 	uint32_t cfe_eptseal;
--	int argc = fw_arg0;
--	char **envp = (char **) fw_arg2;
--	int *prom_vec = (int *) fw_arg3;
--
--	/*
--	 * Check if a loader was used; if NOT, the 4 arguments are
--	 * what CFE gives us (handle, 0, EPT and EPTSEAL)
--	 */
--	if (argc < 0) {
--		cfe_handle = (uint32_t)argc;
--		cfe_ept = (uint32_t)envp;
--		cfe_eptseal = (uint32_t)prom_vec;
--	} else {
--		if ((int)prom_vec < 0) {
--			/*
--			 * Old loader; all it gives us is the handle,
--			 * so use the "known" entrypoint and assume
--			 * the seal.
--			 */
--			cfe_handle = (uint32_t)prom_vec;
--			cfe_ept = 0xBFC00500;
--			cfe_eptseal = CFE_EPTSEAL;
--		} else {
--			/*
--			 * Newer loaders bundle the handle/ept/eptseal
--			 * Note: prom_vec is in the loader's useg
--			 * which is still alive in the TLB.
--			 */
--			cfe_handle = prom_vec[0];
--			cfe_ept = prom_vec[2];
--			cfe_eptseal = prom_vec[3];
--		}
--	}
-+
-+	cfe_eptseal = (uint32_t) fw_arg3;
-+	cfe_handle = (uint32_t) fw_arg0;
-+	cfe_ept = (uint32_t) fw_arg2;
- 
- 	if (cfe_eptseal != CFE_EPTSEAL) {
--		/* too early for panic to do any good */
- 		printk(KERN_ERR "CFE's entrypoint seal doesn't match.");
--		while (1) ;
-+		return -1;
- 	}
- 
- 	cfe_init(cfe_handle, cfe_ept);
--}
--
--static __init void prom_init_console(void)
--{
--	/* Initialize CFE console */
--	cfe_cons_handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE);
--}
--
--static __init void prom_init_cmdline(void)
--{
--	static char buf[COMMAND_LINE_SIZE] __initdata;
--
--	/* Get the kernel command line from CFE */
--	if (cfe_getenv("LINUX_CMDLINE", buf, COMMAND_LINE_SIZE) >= 0) {
--		buf[COMMAND_LINE_SIZE - 1] = 0;
--		strcpy(arcs_cmdline, buf);
--	}
--
--	/* Force a console handover by adding a console= argument if needed,
--	 * as CFE is not available anymore later in the boot process. */
--	if ((strstr(arcs_cmdline, "console=")) == NULL) {
--		/* Try to read the default serial port used by CFE */
--		if ((cfe_getenv("BOOT_CONSOLE", buf, COMMAND_LINE_SIZE) < 0)
--		    || (strncmp("uart", buf, 4)))
--			/* Default to uart0 */
--			strcpy(buf, "uart0");
--
--		/* Compute the new command line */
--		snprintf(arcs_cmdline, COMMAND_LINE_SIZE, "%s console=ttyS%c,115200",
--			 arcs_cmdline, buf[4]);
--	}
-+	return 0;
- }
- 
- static __init void prom_init_mem(void)
-@@ -161,8 +93,6 @@ static __init void prom_init_mem(void)
- void __init prom_init(void)
- {
- 	prom_init_cfe();
--	prom_init_console();
--	prom_init_cmdline();
- 	prom_init_mem();
- }
- 

target/linux/brcm47xx/patches-2.6.34/021-USB-Add-USB-2.0-to-ssb-ohci-driver.patch

@@ -1,92 +0,0 @@
-From ca00adabb88dd1194891624836d7574aab2d7c05 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <[email protected]>
-Date: Sun, 18 Jul 2010 21:25:03 +0200
-Subject: [PATCH 1/2] USB: Add USB 2.0 to ssb ohci driver
-
-This adds USB 2.0 support to ssb ohci driver.
-This patch was used in OpenWRT for a long time now.
-
-CC: Steve Brown <[email protected]>
-Signed-off-by: Hauke Mehrtens <[email protected]>
----
- drivers/usb/host/ohci-ssb.c |   52 ++++++++++++++++++++++++++++++++++++++++--
- 1 files changed, 49 insertions(+), 3 deletions(-)
-
---- a/drivers/usb/host/ohci-ssb.c
-+++ b/drivers/usb/host/ohci-ssb.c
-@@ -93,8 +93,11 @@ static void ssb_ohci_detach(struct ssb_d
- {
- 	struct usb_hcd *hcd = ssb_get_drvdata(dev);
- 
-+	if (hcd->driver->shutdown)
-+		hcd->driver->shutdown(hcd);
- 	usb_remove_hcd(hcd);
- 	iounmap(hcd->regs);
-+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
- 	usb_put_hcd(hcd);
- 	ssb_device_disable(dev, 0);
- }
-@@ -106,10 +109,52 @@ static int ssb_ohci_attach(struct ssb_de
- 	int err = -ENOMEM;
- 	u32 tmp, flags = 0;
- 
--	if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV)
--		flags |= SSB_OHCI_TMSLOW_HOSTMODE;
-+	if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) ||
-+	    dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
-+		return -EOPNOTSUPP;
- 
--	ssb_device_enable(dev, flags);
-+	if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) {
-+		/* Put the device into host-mode. */
-+		flags |= SSB_OHCI_TMSLOW_HOSTMODE;
-+		ssb_device_enable(dev, flags);
-+	} else if (dev->id.coreid == SSB_DEV_USB20_HOST) {
-+		/*
-+		 * USB 2.0 special considerations:
-+		 *
-+		 * In addition to the standard SSB reset sequence, the Host
-+		 * Control Register must be programmed to bring the USB core
-+		 * and various phy components out of reset.
-+		 */
-+		ssb_device_enable(dev, 0);
-+		ssb_write32(dev, 0x200, 0x7ff);
-+
-+		/* Change Flush control reg */
-+		tmp = ssb_read32(dev, 0x400);
-+		tmp &= ~8;
-+		ssb_write32(dev, 0x400, tmp);
-+		tmp = ssb_read32(dev, 0x400);
-+
-+		/* Change Shim control reg */
-+		tmp = ssb_read32(dev, 0x304);
-+		tmp &= ~0x100;
-+		ssb_write32(dev, 0x304, tmp);
-+		tmp = ssb_read32(dev, 0x304);
-+
-+		udelay(1);
-+
-+		/* Work around for 5354 failures */
-+		if (dev->id.revision == 2 && dev->bus->chip_id == 0x5354) {
-+			/* Change syn01 reg */
-+			tmp = 0x00fe00fe;
-+			ssb_write32(dev, 0x894, tmp);
-+
-+			/* Change syn03 reg */
-+			tmp = ssb_read32(dev, 0x89c);
-+			tmp |= 0x1;
-+			ssb_write32(dev, 0x89c, tmp);
-+		}
-+	} else
-+		ssb_device_enable(dev, 0);
- 
- 	hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev,
- 			dev_name(dev->dev));
-@@ -200,6 +245,7 @@ static int ssb_ohci_resume(struct ssb_de
- static const struct ssb_device_id ssb_ohci_table[] = {
- 	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
- 	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
-+	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
- 	SSB_DEVTABLE_END
- };
- MODULE_DEVICE_TABLE(ssb, ssb_ohci_table);

target/linux/brcm47xx/patches-2.6.34/022-USB-Add-ehci-ssb-driver.patch

@@ -1,345 +0,0 @@
-From ad224c0d5fa0fc05f8aaef3c19fc9b4eb275a5d2 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <[email protected]>
-Date: Sun, 18 Jul 2010 21:29:40 +0200
-Subject: [PATCH 2/2] USB: Add ehci ssb driver
-
-Support for the Sonics Silicon Backplane (SSB) attached Broadcom USB EHCI core.
-
-Signed-off-by: Hauke Mehrtens <[email protected]>
----
- drivers/usb/host/Kconfig    |   13 ++
- drivers/usb/host/ehci-hcd.c |   22 ++++-
- drivers/usb/host/ehci-ssb.c |  255 +++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 288 insertions(+), 2 deletions(-)
- create mode 100644 drivers/usb/host/ehci-ssb.c
-
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -150,6 +150,19 @@ config USB_OXU210HP_HCD
- 	  To compile this driver as a module, choose M here: the
- 	  module will be called oxu210hp-hcd.
- 
-+config USB_EHCI_HCD_SSB
-+	bool "EHCI support for Broadcom SSB EHCI core"
-+	depends on USB_EHCI_HCD && (SSB = y || SSB = USB_EHCI_HCD) && EXPERIMENTAL
-+	default n
-+	---help---
-+	  Support for the Sonics Silicon Backplane (SSB) attached
-+	  Broadcom USB EHCI core.
-+
-+	  This device is present in some embedded devices with
-+	  Broadcom based SSB bus.
-+
-+	  If unsure, say N.
-+
- config USB_ISP116X_HCD
- 	tristate "ISP116X HCD support"
- 	depends on USB
---- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -1159,8 +1159,14 @@ MODULE_LICENSE ("GPL");
- #define	PLATFORM_DRIVER		ehci_atmel_driver
- #endif
- 
-+#ifdef CONFIG_USB_EHCI_HCD_SSB
-+#include "ehci-ssb.c"
-+#define SSB_EHCI_DRIVER		ssb_ehci_driver
-+#endif
-+
- #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
--    !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER)
-+    !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
-+    !defined(SSB_EHCI_DRIVER)
- #error "missing bus glue for ehci-hcd"
- #endif
- 
-@@ -1214,10 +1220,20 @@ static int __init ehci_hcd_init(void)
- 	if (retval < 0)
- 		goto clean3;
- #endif
-+
-+#ifdef SSB_EHCI_DRIVER
-+	retval = ssb_driver_register(&SSB_EHCI_DRIVER);
-+	if (retval < 0)
-+		goto clean4;
-+#endif
- 	return retval;
- 
-+#ifdef SSB_EHCI_DRIVER
-+	/* ssb_driver_unregister(&SSB_EHCI_DRIVER); */
-+clean4:
-+#endif
- #ifdef OF_PLATFORM_DRIVER
--	/* of_unregister_platform_driver(&OF_PLATFORM_DRIVER); */
-+	of_unregister_platform_driver(&OF_PLATFORM_DRIVER);
- clean3:
- #endif
- #ifdef PS3_SYSTEM_BUS_DRIVER
-@@ -1244,6 +1260,9 @@ module_init(ehci_hcd_init);
- 
- static void __exit ehci_hcd_cleanup(void)
- {
-+#ifdef SSB_EHCI_DRIVER
-+	ssb_driver_unregister(&SSB_EHCI_DRIVER);
-+#endif
- #ifdef OF_PLATFORM_DRIVER
- 	of_unregister_platform_driver(&OF_PLATFORM_DRIVER);
- #endif
---- /dev/null
-+++ b/drivers/usb/host/ehci-ssb.c
-@@ -0,0 +1,255 @@
-+/*
-+ * Sonics Silicon Backplane
-+ * Broadcom USB-core EHCI driver (SSB bus glue)
-+ *
-+ * Copyright 2007 Steven Brown <[email protected]>
-+ * Copyright 2010 Hauke Mehrtens <[email protected]>
-+ *
-+ * Derived from the OHCI-SSB driver
-+ * Copyright 2007 Michael Buesch <[email protected]>
-+ *
-+ * Derived from the EHCI-PCI driver
-+ * Copyright (c) 2000-2004 by David Brownell
-+ *
-+ * Derived from the OHCI-PCI driver
-+ * Copyright 1999 Roman Weissgaerber
-+ * Copyright 2000-2002 David Brownell
-+ * Copyright 1999 Linus Torvalds
-+ * Copyright 1999 Gregory P. Smith
-+ *
-+ * Derived from the USBcore related parts of Broadcom-SB
-+ * Copyright 2005 Broadcom Corporation
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+#include <linux/ssb/ssb.h>
-+
-+
-+struct ssb_ehci_device {
-+	struct ehci_hcd ehci; /* _must_ be at the beginning. */
-+};
-+
-+static inline
-+struct ssb_ehci_device *hcd_to_ssb_ehci(struct usb_hcd *hcd)
-+{
-+	return (struct ssb_ehci_device *)(hcd->hcd_priv);
-+}
-+
-+static int ssb_ehci_reset(struct usb_hcd *hcd)
-+{
-+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-+	int err;
-+
-+	ehci->caps = hcd->regs;
-+	ehci->regs = hcd->regs +
-+		HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
-+
-+	dbg_hcs_params(ehci, "reset");
-+	dbg_hcc_params(ehci, "reset");
-+
-+	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
-+
-+	err = ehci_halt(ehci);
-+
-+	if (err)
-+		return err;
-+
-+	err = ehci_init(hcd);
-+
-+	if (err)
-+		return err;
-+
-+	ehci_reset(ehci);
-+
-+	return err;
-+}
-+
-+static const struct hc_driver ssb_ehci_hc_driver = {
-+	.description		= "ssb-usb-ehci",
-+	.product_desc		= "SSB EHCI Controller",
-+	.hcd_priv_size		= sizeof(struct ssb_ehci_device),
-+
-+	.irq			= ehci_irq,
-+	.flags			= HCD_MEMORY | HCD_USB2,
-+
-+	.reset			= ssb_ehci_reset,
-+	.start			= ehci_run,
-+	.stop			= ehci_stop,
-+	.shutdown		= ehci_shutdown,
-+
-+	.urb_enqueue		= ehci_urb_enqueue,
-+	.urb_dequeue		= ehci_urb_dequeue,
-+	.endpoint_disable	= ehci_endpoint_disable,
-+	.endpoint_reset		= ehci_endpoint_reset,
-+
-+	.get_frame_number	= ehci_get_frame,
-+
-+	.hub_status_data	= ehci_hub_status_data,
-+	.hub_control		= ehci_hub_control,
-+#if defined(CONFIG_PM)
-+	.bus_suspend		= ehci_bus_suspend,
-+	.bus_resume		= ehci_bus_resume,
-+#endif
-+	.relinquish_port	= ehci_relinquish_port,
-+	.port_handed_over	= ehci_port_handed_over,
-+
-+	.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
-+};
-+
-+static void ssb_ehci_detach(struct ssb_device *dev)
-+{
-+	struct usb_hcd *hcd = ssb_get_drvdata(dev);
-+
-+	if (hcd->driver->shutdown)
-+		hcd->driver->shutdown(hcd);
-+	usb_remove_hcd(hcd);
-+	iounmap(hcd->regs);
-+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-+	usb_put_hcd(hcd);
-+	ssb_device_disable(dev, 0);
-+}
-+
-+static int ssb_ehci_attach(struct ssb_device *dev)
-+{
-+	struct ssb_ehci_device *ehcidev;
-+	struct usb_hcd *hcd;
-+	int err = -ENOMEM;
-+	u32 tmp;
-+
-+	if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) ||
-+	    dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
-+		return -EOPNOTSUPP;
-+
-+	/*
-+	 * USB 2.0 special considerations:
-+	 *
-+	 * In addition to the standard SSB reset sequence, the Host Control
-+	 * Register must be programmed to bring the USB core and various phy
-+	 * components out of reset.
-+	 */
-+	ssb_device_enable(dev, 0);
-+	ssb_write32(dev, 0x200, 0x7ff);
-+
-+	/* Change Flush control reg */
-+	tmp = ssb_read32(dev, 0x400);
-+	tmp &= ~8;
-+	ssb_write32(dev, 0x400, tmp);
-+	tmp = ssb_read32(dev, 0x400);
-+
-+	/* Change Shim control reg */
-+	tmp = ssb_read32(dev, 0x304);
-+	tmp &= ~0x100;
-+	ssb_write32(dev, 0x304, tmp);
-+	tmp = ssb_read32(dev, 0x304);
-+
-+	udelay(1);
-+
-+	/* Work around for 5354 failures */
-+	if (dev->id.revision == 2 && dev->bus->chip_id == 0x5354) {
-+		/* Change syn01 reg */
-+		tmp = 0x00fe00fe;
-+		ssb_write32(dev, 0x894, tmp);
-+
-+		/* Change syn03 reg */
-+		tmp = ssb_read32(dev, 0x89c);
-+		tmp |= 0x1;
-+		ssb_write32(dev, 0x89c, tmp);
-+	}
-+
-+	hcd = usb_create_hcd(&ssb_ehci_hc_driver, dev->dev,
-+			     dev_name(dev->dev));
-+	if (!hcd)
-+		goto err_dev_disable;
-+
-+	ehcidev = hcd_to_ssb_ehci(hcd);
-+	tmp = ssb_read32(dev, SSB_ADMATCH0);
-+	hcd->rsrc_start = ssb_admatch_base(tmp) + 0x800; /* ehci core offset */
-+	hcd->rsrc_len = 0x100; /* ehci reg block size */
-+	/*
-+	 * start & size modified per sbutils.c
-+	 */
-+	hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
-+	if (!hcd->regs)
-+		goto err_put_hcd;
-+	err = usb_add_hcd(hcd, dev->irq, IRQF_DISABLED | IRQF_SHARED);
-+	if (err)
-+		goto err_iounmap;
-+
-+	ssb_set_drvdata(dev, hcd);
-+
-+	return err;
-+
-+err_iounmap:
-+	iounmap(hcd->regs);
-+err_put_hcd:
-+	usb_put_hcd(hcd);
-+err_dev_disable:
-+	ssb_device_disable(dev, 0);
-+	return err;
-+}
-+
-+static int ssb_ehci_probe(struct ssb_device *dev,
-+		const struct ssb_device_id *id)
-+{
-+	int err;
-+	u16 chipid_top;
-+
-+	/* USBcores are only connected on embedded devices. */
-+	chipid_top = (dev->bus->chip_id & 0xFF00);
-+	if (chipid_top != 0x4700 && chipid_top != 0x5300)
-+		return -ENODEV;
-+
-+	/* TODO: Probably need checks here; is the core connected? */
-+
-+	if (usb_disabled())
-+		return -ENODEV;
-+
-+	err = ssb_ehci_attach(dev);
-+
-+	return err;
-+}
-+
-+static void ssb_ehci_remove(struct ssb_device *dev)
-+{
-+	ssb_ehci_detach(dev);
-+}
-+
-+#ifdef CONFIG_PM
-+
-+static int ssb_ehci_suspend(struct ssb_device *dev, pm_message_t state)
-+{
-+	ssb_device_disable(dev, 0);
-+
-+	return 0;
-+}
-+
-+static int ssb_ehci_resume(struct ssb_device *dev)
-+{
-+	struct usb_hcd *hcd = ssb_get_drvdata(dev);
-+	struct ssb_ehci_device *ehcidev = hcd_to_ssb_ehci(hcd);
-+
-+	ssb_device_enable(dev, 0);
-+
-+	ehci_finish_controller_resume(hcd);
-+	return 0;
-+}
-+
-+#else /* !CONFIG_PM */
-+#define ssb_ehci_suspend	NULL
-+#define ssb_ehci_resume	NULL
-+#endif /* CONFIG_PM */
-+
-+static const struct ssb_device_id ssb_ehci_table[] = {
-+	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
-+	SSB_DEVTABLE_END
-+};
-+MODULE_DEVICE_TABLE(ssb, ssb_ehci_table);
-+
-+static struct ssb_driver ssb_ehci_driver = {
-+	.name		= KBUILD_MODNAME,
-+	.id_table	= ssb_ehci_table,
-+	.probe		= ssb_ehci_probe,
-+	.remove		= ssb_ehci_remove,
-+	.suspend	= ssb_ehci_suspend,
-+	.resume		= ssb_ehci_resume,
-+};

target/linux/brcm47xx/patches-2.6.34/110-flash_map.patch

@@ -1,25 +0,0 @@
---- a/drivers/mtd/maps/Kconfig
-+++ b/drivers/mtd/maps/Kconfig
-@@ -319,6 +319,12 @@ config MTD_CFI_FLAGADM
- 	  Mapping for the Flaga digital module. If you don't have one, ignore
- 	  this setting.
- 
-+config MTD_BCM47XX
-+	tristate "BCM47xx flash device"
-+	depends on MIPS && MTD_CFI && BCM47XX
-+	help
-+	  Support for the flash chips on the BCM947xx board.
-+
- config MTD_REDWOOD
- 	tristate "CFI Flash devices mapped on IBM Redwood"
- 	depends on MTD_CFI && ( REDWOOD_4 || REDWOOD_5 || REDWOOD_6 )
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -29,6 +29,7 @@ obj-$(CONFIG_MTD_PMC_MSP_EVM)   += pmcms
- obj-$(CONFIG_MTD_PCMCIA)	+= pcmciamtd.o
- obj-$(CONFIG_MTD_RPXLITE)	+= rpxlite.o
- obj-$(CONFIG_MTD_TQM8XXL)	+= tqm8xxl.o
-+obj-$(CONFIG_MTD_BCM47XX)	+= bcm47xx-flash.o
- obj-$(CONFIG_MTD_SA1100)	+= sa1100-flash.o
- obj-$(CONFIG_MTD_SBC_GXX)	+= sbc_gxx.o
- obj-$(CONFIG_MTD_SC520CDP)	+= sc520cdp.o

target/linux/brcm47xx/patches-2.6.34/150-cpu_fixes.patch

@@ -1,367 +0,0 @@
---- a/arch/mips/include/asm/r4kcache.h
-+++ b/arch/mips/include/asm/r4kcache.h
-@@ -17,6 +17,20 @@
- #include <asm/cpu-features.h>
- #include <asm/mipsmtregs.h>
- 
-+#ifdef CONFIG_BCM47XX
-+#include <asm/paccess.h>
-+#include <linux/ssb/ssb.h>
-+#define BCM4710_DUMMY_RREG() ((void) *((u8 *) KSEG1ADDR(SSB_ENUM_BASE)))
-+
-+#define BCM4710_FILL_TLB(addr) (*(volatile unsigned long *)(addr))
-+#define BCM4710_PROTECTED_FILL_TLB(addr) ({ unsigned long x; get_dbe(x, (volatile unsigned long *)(addr)); })
-+#else
-+#define BCM4710_DUMMY_RREG()
-+
-+#define BCM4710_FILL_TLB(addr)
-+#define BCM4710_PROTECTED_FILL_TLB(addr)
-+#endif
-+
- /*
-  * This macro return a properly sign-extended address suitable as base address
-  * for indexed cache operations.  Two issues here:
-@@ -150,6 +164,7 @@ static inline void flush_icache_line_ind
- static inline void flush_dcache_line_indexed(unsigned long addr)
- {
- 	__dflush_prologue
-+	BCM4710_DUMMY_RREG();
- 	cache_op(Index_Writeback_Inv_D, addr);
- 	__dflush_epilogue
- }
-@@ -169,6 +184,7 @@ static inline void flush_icache_line(uns
- static inline void flush_dcache_line(unsigned long addr)
- {
- 	__dflush_prologue
-+	BCM4710_DUMMY_RREG();
- 	cache_op(Hit_Writeback_Inv_D, addr);
- 	__dflush_epilogue
- }
-@@ -176,6 +192,7 @@ static inline void flush_dcache_line(uns
- static inline void invalidate_dcache_line(unsigned long addr)
- {
- 	__dflush_prologue
-+	BCM4710_DUMMY_RREG();
- 	cache_op(Hit_Invalidate_D, addr);
- 	__dflush_epilogue
- }
-@@ -208,6 +225,7 @@ static inline void flush_scache_line(uns
-  */
- static inline void protected_flush_icache_line(unsigned long addr)
- {
-+	BCM4710_DUMMY_RREG();
- 	protected_cache_op(Hit_Invalidate_I, addr);
- }
- 
-@@ -219,6 +237,7 @@ static inline void protected_flush_icach
-  */
- static inline void protected_writeback_dcache_line(unsigned long addr)
- {
-+	BCM4710_DUMMY_RREG();
- 	protected_cache_op(Hit_Writeback_Inv_D, addr);
- }
- 
-@@ -339,8 +358,52 @@ static inline void invalidate_tcache_pag
- 		: "r" (base),						\
- 		  "i" (op));
- 
-+static inline void blast_dcache(void)
-+{
-+	unsigned long start = KSEG0;
-+	unsigned long dcache_size = current_cpu_data.dcache.waysize * current_cpu_data.dcache.ways;
-+	unsigned long end = (start + dcache_size);
-+
-+	do {
-+		BCM4710_DUMMY_RREG();
-+		cache_op(Index_Writeback_Inv_D, start);
-+		start += current_cpu_data.dcache.linesz;
-+	} while(start < end);
-+}
-+
-+static inline void blast_dcache_page(unsigned long page)
-+{
-+	unsigned long start = page;
-+	unsigned long end = start + PAGE_SIZE;
-+
-+	BCM4710_FILL_TLB(start);
-+	do {
-+		BCM4710_DUMMY_RREG();
-+		cache_op(Hit_Writeback_Inv_D, start);
-+		start += current_cpu_data.dcache.linesz;
-+	} while(start < end);
-+}
-+
-+static inline void blast_dcache_page_indexed(unsigned long page)
-+{
-+	unsigned long start = page;
-+	unsigned long end = start + PAGE_SIZE;
-+	unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit;
-+	unsigned long ws_end = current_cpu_data.dcache.ways <<
-+	                       current_cpu_data.dcache.waybit;
-+	unsigned long ws, addr;
-+	for (ws = 0; ws < ws_end; ws += ws_inc) {
-+		start = page + ws;
-+		for (addr = start; addr < end; addr += current_cpu_data.dcache.linesz) {
-+			BCM4710_DUMMY_RREG();
-+			cache_op(Index_Writeback_Inv_D, addr);
-+		}
-+	}
-+}
-+
-+
- /* build blast_xxx, blast_xxx_page, blast_xxx_page_indexed */
--#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize) \
-+#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize, war) \
- static inline void blast_##pfx##cache##lsize(void)			\
- {									\
- 	unsigned long start = INDEX_BASE;				\
-@@ -352,6 +415,7 @@ static inline void blast_##pfx##cache##l
- 									\
- 	__##pfx##flush_prologue						\
- 									\
-+	war								\
- 	for (ws = 0; ws < ws_end; ws += ws_inc)				\
- 		for (addr = start; addr < end; addr += lsize * 32)	\
- 			cache##lsize##_unroll32(addr|ws, indexop);	\
-@@ -366,6 +430,7 @@ static inline void blast_##pfx##cache##l
- 									\
- 	__##pfx##flush_prologue						\
- 									\
-+	war								\
- 	do {								\
- 		cache##lsize##_unroll32(start, hitop);			\
- 		start += lsize * 32;					\
-@@ -384,6 +449,8 @@ static inline void blast_##pfx##cache##l
- 	                       current_cpu_data.desc.waybit;		\
- 	unsigned long ws, addr;						\
- 									\
-+	war								\
-+									\
- 	__##pfx##flush_prologue						\
- 									\
- 	for (ws = 0; ws < ws_end; ws += ws_inc)				\
-@@ -393,36 +460,38 @@ static inline void blast_##pfx##cache##l
- 	__##pfx##flush_epilogue						\
- }
- 
--__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16)
--__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16)
--__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16)
--__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32)
--__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32)
--__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32)
--__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64)
--__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64)
--__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64)
--__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128)
--
--__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16)
--__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32)
--__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16)
--__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32)
--__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64)
--__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128)
-+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16, )
-+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16, BCM4710_FILL_TLB(start);)
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16, )
-+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32, )
-+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32, BCM4710_FILL_TLB(start);)
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32, )
-+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64, )
-+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64, BCM4710_FILL_TLB(start);)
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64, )
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128, )
-+
-+__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16, )
-+__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32, )
-+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16, )
-+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32, )
-+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64, )
-+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128, )
- 
- /* build blast_xxx_range, protected_blast_xxx_range */
--#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot) \
-+#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot, war, war2) \
- static inline void prot##blast_##pfx##cache##_range(unsigned long start, \
- 						    unsigned long end)	\
- {									\
- 	unsigned long lsize = cpu_##desc##_line_size();			\
- 	unsigned long addr = start & ~(lsize - 1);			\
- 	unsigned long aend = (end - 1) & ~(lsize - 1);			\
-+	war								\
- 									\
- 	__##pfx##flush_prologue						\
- 									\
- 	while (1) {							\
-+		war2						\
- 		prot##cache_op(hitop, addr);				\
- 		if (addr == aend)					\
- 			break;						\
-@@ -432,13 +501,13 @@ static inline void prot##blast_##pfx##ca
- 	__##pfx##flush_epilogue						\
- }
- 
--__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_)
--__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_)
--__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_)
--__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, )
--__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, )
-+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_, BCM4710_PROTECTED_FILL_TLB(addr); BCM4710_PROTECTED_FILL_TLB(aend);, BCM4710_DUMMY_RREG();)
-+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_,, )
-+__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_,, )
-+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D,, BCM4710_FILL_TLB(addr); BCM4710_FILL_TLB(aend);, BCM4710_DUMMY_RREG();)
-+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD,,, )
- /* blast_inv_dcache_range */
--__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, )
--__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, )
-+__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D,,,BCM4710_DUMMY_RREG();)
-+__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD,,, )
- 
- #endif /* _ASM_R4KCACHE_H */
---- a/arch/mips/include/asm/stackframe.h
-+++ b/arch/mips/include/asm/stackframe.h
-@@ -449,6 +449,10 @@
- 		.macro	RESTORE_SP_AND_RET
- 		LONG_L	sp, PT_R29(sp)
- 		.set	mips3
-+#ifdef CONFIG_BCM47XX
-+		nop
-+		nop
-+#endif
- 		eret
- 		.set	mips0
- 		.endm
---- a/arch/mips/kernel/genex.S
-+++ b/arch/mips/kernel/genex.S
-@@ -52,6 +52,10 @@ NESTED(except_vec1_generic, 0, sp)
- NESTED(except_vec3_generic, 0, sp)
- 	.set	push
- 	.set	noat
-+#ifdef CONFIG_BCM47XX
-+	nop
-+	nop
-+#endif
- #if R5432_CP0_INTERRUPT_WAR
- 	mfc0	k0, CP0_INDEX
- #endif
---- a/arch/mips/mm/c-r4k.c
-+++ b/arch/mips/mm/c-r4k.c
-@@ -35,6 +35,9 @@
- #include <asm/cacheflush.h> /* for run_uncached() */
- 
- 
-+/* For enabling BCM4710 cache workarounds */
-+int bcm4710 = 0;
-+
- /*
-  * Special Variant of smp_call_function for use by cache functions:
-  *
-@@ -111,6 +114,9 @@ static void __cpuinit r4k_blast_dcache_p
- {
- 	unsigned long  dc_lsize = cpu_dcache_line_size();
- 
-+	if (bcm4710)
-+		r4k_blast_dcache_page = blast_dcache_page;
-+	else
- 	if (dc_lsize == 0)
- 		r4k_blast_dcache_page = (void *)cache_noop;
- 	else if (dc_lsize == 16)
-@@ -127,6 +133,9 @@ static void __cpuinit r4k_blast_dcache_p
- {
- 	unsigned long dc_lsize = cpu_dcache_line_size();
- 
-+	if (bcm4710)
-+		r4k_blast_dcache_page_indexed = blast_dcache_page_indexed;
-+	else
- 	if (dc_lsize == 0)
- 		r4k_blast_dcache_page_indexed = (void *)cache_noop;
- 	else if (dc_lsize == 16)
-@@ -143,6 +152,9 @@ static void __cpuinit r4k_blast_dcache_s
- {
- 	unsigned long dc_lsize = cpu_dcache_line_size();
- 
-+	if (bcm4710)
-+		r4k_blast_dcache = blast_dcache;
-+	else
- 	if (dc_lsize == 0)
- 		r4k_blast_dcache = (void *)cache_noop;
- 	else if (dc_lsize == 16)
-@@ -680,6 +692,8 @@ static void local_r4k_flush_cache_sigtra
- 	unsigned long addr = (unsigned long) arg;
- 
- 	R4600_HIT_CACHEOP_WAR_IMPL;
-+	BCM4710_PROTECTED_FILL_TLB(addr);
-+	BCM4710_PROTECTED_FILL_TLB(addr + 4);
- 	if (dc_lsize)
- 		protected_writeback_dcache_line(addr & ~(dc_lsize - 1));
- 	if (!cpu_icache_snoops_remote_store && scache_size)
-@@ -1311,6 +1325,17 @@ static void __cpuinit coherency_setup(vo
- 	 * silly idea of putting something else there ...
- 	 */
- 	switch (current_cpu_type()) {
-+	case CPU_BCM3302:
-+		{
-+			u32 cm;
-+			cm = read_c0_diag();
-+			/* Enable icache */
-+			cm |= (1 << 31);
-+			/* Enable dcache */
-+			cm |= (1 << 30);
-+			write_c0_diag(cm);
-+		}
-+		break;
- 	case CPU_R4000PC:
- 	case CPU_R4000SC:
- 	case CPU_R4000MC:
-@@ -1367,6 +1392,15 @@ void __cpuinit r4k_cache_init(void)
- 		break;
- 	}
- 
-+	/* Check if special workarounds are required */
-+#ifdef CONFIG_BCM47XX
-+	if (current_cpu_data.cputype == CPU_BCM4710 && (current_cpu_data.processor_id & 0xff) == 0) {
-+		printk("Enabling BCM4710A0 cache workarounds.\n");
-+		bcm4710 = 1;
-+	} else
-+#endif
-+		bcm4710 = 0;
-+
- 	probe_pcache();
- 	setup_scache();
- 
-@@ -1425,5 +1459,13 @@ void __cpuinit r4k_cache_init(void)
- #if !defined(CONFIG_MIPS_CMP)
- 	local_r4k___flush_cache_all(NULL);
- #endif
-+#ifdef CONFIG_BCM47XX
-+	{
-+		static void (*_coherency_setup)(void);
-+		_coherency_setup = (void (*)(void)) KSEG1ADDR(coherency_setup);
-+		_coherency_setup();
-+	}
-+#else
- 	coherency_setup();
-+#endif
- }
---- a/arch/mips/mm/tlbex.c
-+++ b/arch/mips/mm/tlbex.c
-@@ -868,6 +868,9 @@ static void __cpuinit build_r4000_tlb_re
- 		/* No need for uasm_i_nop */
- 	}
- 
-+#ifdef CONFIG_BCM47XX
-+	uasm_i_nop(&p);
-+#endif
- #ifdef CONFIG_64BIT
- 	build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */
- #else
-@@ -1318,6 +1321,9 @@ build_r4000_tlbchange_handler_head(u32 *
- 				   struct uasm_reloc **r, unsigned int pte,
- 				   unsigned int ptr)
- {
-+#ifdef CONFIG_BCM47XX
-+	uasm_i_nop(p);
-+#endif
- #ifdef CONFIG_64BIT
- 	build_get_pmde64(p, l, r, pte, ptr); /* get pmd in ptr */
- #else

target/linux/brcm47xx/patches-2.6.34/160-kmap_coherent.patch

@@ -1,77 +0,0 @@
---- a/arch/mips/include/asm/cpu-features.h
-+++ b/arch/mips/include/asm/cpu-features.h
-@@ -110,6 +110,9 @@
- #ifndef cpu_has_pindexed_dcache
- #define cpu_has_pindexed_dcache	(cpu_data[0].dcache.flags & MIPS_CACHE_PINDEX)
- #endif
-+#ifndef cpu_use_kmap_coherent
-+#define cpu_use_kmap_coherent 1
-+#endif
- 
- /*
-  * I-Cache snoops remote store.  This only matters on SMP.  Some multiprocessors
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm47xx/cpu-feature-overrides.h
-@@ -0,0 +1,13 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2005 Ralf Baechle ([email protected])
-+ */
-+#ifndef __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H
-+#define __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H
-+
-+#define cpu_use_kmap_coherent	0
-+
-+#endif /* __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H */
---- a/arch/mips/mm/c-r4k.c
-+++ b/arch/mips/mm/c-r4k.c
-@@ -507,7 +507,7 @@ static inline void local_r4k_flush_cache
- 		 */
- 		map_coherent = (cpu_has_dc_aliases &&
- 				page_mapped(page) && !Page_dcache_dirty(page));
--		if (map_coherent)
-+		if (map_coherent && cpu_use_kmap_coherent)
- 			vaddr = kmap_coherent(page, addr);
- 		else
- 			vaddr = kmap_atomic(page, KM_USER0);
-@@ -530,7 +530,7 @@ static inline void local_r4k_flush_cache
- 	}
- 
- 	if (vaddr) {
--		if (map_coherent)
-+		if (map_coherent && cpu_use_kmap_coherent)
- 			kunmap_coherent();
- 		else
- 			kunmap_atomic(vaddr, KM_USER0);
---- a/arch/mips/mm/init.c
-+++ b/arch/mips/mm/init.c
-@@ -210,7 +210,7 @@ void copy_user_highpage(struct page *to,
- 	void *vfrom, *vto;
- 
- 	vto = kmap_atomic(to, KM_USER1);
--	if (cpu_has_dc_aliases &&
-+	if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
- 	    page_mapped(from) && !Page_dcache_dirty(from)) {
- 		vfrom = kmap_coherent(from, vaddr);
- 		copy_page(vto, vfrom);
-@@ -232,7 +232,7 @@ void copy_to_user_page(struct vm_area_st
- 	struct page *page, unsigned long vaddr, void *dst, const void *src,
- 	unsigned long len)
- {
--	if (cpu_has_dc_aliases &&
-+	if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
- 	    page_mapped(page) && !Page_dcache_dirty(page)) {
- 		void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
- 		memcpy(vto, src, len);
-@@ -250,7 +250,7 @@ void copy_from_user_page(struct vm_area_
- 	struct page *page, unsigned long vaddr, void *dst, const void *src,
- 	unsigned long len)
- {
--	if (cpu_has_dc_aliases &&
-+	if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
- 	    page_mapped(page) && !Page_dcache_dirty(page)) {
- 		void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
- 		memcpy(dst, vfrom, len);

target/linux/brcm47xx/patches-2.6.34/210-b44_phy_fix.patch

@@ -1,92 +0,0 @@
---- a/drivers/net/b44.c
-+++ b/drivers/net/b44.c
-@@ -381,11 +381,12 @@ static void b44_set_flow_ctrl(struct b44
- 	__b44_set_flow_ctrl(bp, pause_enab);
- }
- 
--#ifdef SSB_DRIVER_MIPS
--extern char *nvram_get(char *name);
-+#ifdef CONFIG_BCM47XX
-+
-+#include <asm/mach-bcm47xx/nvram.h>
- static void b44_wap54g10_workaround(struct b44 *bp)
- {
--	const char *str;
-+	char buf[20];
- 	u32 val;
- 	int err;
- 
-@@ -394,10 +395,9 @@ static void b44_wap54g10_workaround(stru
- 	 * see https://dev.openwrt.org/ticket/146
- 	 * check and reset bit "isolate"
- 	 */
--	str = nvram_get("boardnum");
--	if (!str)
-+	if (nvram_getenv("boardnum", buf, sizeof(buf)) > 0)
- 		return;
--	if (simple_strtoul(str, NULL, 0) == 2) {
-+	if (simple_strtoul(buf, NULL, 0) == 2) {
- 		err = __b44_readphy(bp, 0, MII_BMCR, &val);
- 		if (err)
- 			goto error;
-@@ -412,10 +412,43 @@ static void b44_wap54g10_workaround(stru
- error:
- 	pr_warning("PHY: cannot reset MII transceiver isolate bit\n");
- }
-+
-+static inline int startswith (const char *source, const char *cmp) 
-+{ 
-+       return !strncmp(source,cmp,strlen(cmp)); 
-+}
-+
-+static inline void b44_bcm47xx_workarounds(struct b44 *bp)
-+{
-+	char buf[20];
-+	/* Toshiba WRC-1000, Siemens SE505 v1, Askey RT-210W, RT-220W */
-+	if (nvram_getenv("boardnum", buf, sizeof(buf)) > 0)
-+		return;
-+	if (simple_strtoul(buf, NULL, 0) == 100) {
-+		bp->phy_addr = B44_PHY_ADDR_NO_PHY;
-+	} else {
-+		/* WL-HDD */
-+		struct ssb_device *sdev = bp->sdev;
-+		if (nvram_getenv("hardware_version", buf, sizeof(buf)) > 0)
-+			return;
-+		if (startswith(buf, "WL300-")) {
-+			if (sdev->bus->sprom.et0phyaddr == 0 &&
-+			    sdev->bus->sprom.et1phyaddr == 1)
-+				bp->phy_addr = B44_PHY_ADDR_NO_PHY;
-+		}
-+	}
-+	return;
-+}
-+
- #else
-+
- static inline void b44_wap54g10_workaround(struct b44 *bp)
- {
- }
-+
-+static inline void b44_bcm47xx_workarounds(struct b44 *bp)
-+{
-+}
- #endif
- 
- static int b44_setup_phy(struct b44 *bp)
-@@ -424,6 +457,7 @@ static int b44_setup_phy(struct b44 *bp)
- 	int err;
- 
- 	b44_wap54g10_workaround(bp);
-+	b44_bcm47xx_workarounds(bp);
- 
- 	if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
- 		return 0;
-@@ -2080,6 +2114,8 @@ static int __devinit b44_get_invariants(
- 	 * valid PHY address. */
- 	bp->phy_addr &= 0x1F;
- 
-+	b44_bcm47xx_workarounds(bp);
-+
- 	memcpy(bp->dev->dev_addr, addr, 6);
- 
- 	if (!is_valid_ether_addr(&bp->dev->dev_addr[0])){

target/linux/brcm47xx/patches-2.6.34/211-b44_timeout_spam.patch

@@ -1,15 +0,0 @@
---- a/drivers/net/b44.c
-+++ b/drivers/net/b44.c
-@@ -188,10 +188,11 @@ static int b44_wait_bit(struct b44 *bp,
- 		udelay(10);
- 	}
- 	if (i == timeout) {
-+#if 0
- 		if (net_ratelimit())
- 			netdev_err(bp->dev, "BUG!  Timeout waiting for bit %08x of register %lx to %s\n",
- 				   bit, reg, clear ? "clear" : "set");
--
-+#endif
- 		return -ENODEV;
- 	}
- 	return 0;

target/linux/brcm47xx/patches-2.6.34/220-bcm5354.patch

@@ -1,42 +0,0 @@
---- a/drivers/ssb/driver_chipcommon.c
-+++ b/drivers/ssb/driver_chipcommon.c
-@@ -285,6 +285,8 @@ void ssb_chipco_resume(struct ssb_chipco
- void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc,
-                              u32 *plltype, u32 *n, u32 *m)
- {
-+	if ((chipco_read32(cc, SSB_CHIPCO_CHIPID) & SSB_CHIPCO_IDMASK) == 0x5354)
-+		return;
- 	*n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N);
- 	*plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
- 	switch (*plltype) {
-@@ -308,6 +310,8 @@ void ssb_chipco_get_clockcpu(struct ssb_
- void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc,
- 				 u32 *plltype, u32 *n, u32 *m)
- {
-+	if ((chipco_read32(cc, SSB_CHIPCO_CHIPID) & SSB_CHIPCO_IDMASK) == 0x5354)
-+		return;
- 	*n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N);
- 	*plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
- 	switch (*plltype) {
---- a/drivers/ssb/driver_mipscore.c
-+++ b/drivers/ssb/driver_mipscore.c
-@@ -217,6 +217,8 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m
- 
- 	if ((pll_type == SSB_PLLTYPE_5) || (bus->chip_id == 0x5365)) {
- 		rate = 200000000;
-+	} else if (bus->chip_id == 0x5354) {
-+		rate = 240000000;
- 	} else {
- 		rate = ssb_calc_clock_rate(pll_type, n, m);
- 	}
---- a/drivers/ssb/main.c
-+++ b/drivers/ssb/main.c
-@@ -1105,6 +1105,8 @@ u32 ssb_clockspeed(struct ssb_bus *bus)
- 
- 	if (bus->chip_id == 0x5365) {
- 		rate = 100000000;
-+	} else if (bus->chip_id == 0x5354) {
-+		rate = 120000000;
- 	} else {
- 		rate = ssb_calc_clock_rate(plltype, clkctl_n, clkctl_m);
- 		if (plltype == SSB_PLLTYPE_3) /* 25Mhz, 2 dividers */

target/linux/brcm47xx/patches-2.6.34/280-activate_ssb_support_in_usb.patch

@@ -1,16 +0,0 @@
-This prevents the options from being delete with make kernel_oldconfig.
----
- drivers/ssb/Kconfig |    2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/ssb/Kconfig
-+++ b/drivers/ssb/Kconfig
-@@ -141,6 +141,8 @@ config SSB_DRIVER_MIPS
- config SSB_EMBEDDED
- 	bool
- 	depends on SSB_DRIVER_MIPS
-+	select USB_EHCI_HCD_SSB if USB_EHCI_HCD
-+	select USB_OHCI_HCD_SSB if USB_OHCI_HCD
- 	default y
- 
- config SSB_DRIVER_EXTIF

target/linux/brcm47xx/patches-2.6.34/300-fork_cacheflush.patch

@@ -1,11 +0,0 @@
---- a/arch/mips/include/asm/cacheflush.h
-+++ b/arch/mips/include/asm/cacheflush.h
-@@ -32,7 +32,7 @@
- extern void (*flush_cache_all)(void);
- extern void (*__flush_cache_all)(void);
- extern void (*flush_cache_mm)(struct mm_struct *mm);
--#define flush_cache_dup_mm(mm)	do { (void) (mm); } while (0)
-+#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
- extern void (*flush_cache_range)(struct vm_area_struct *vma,
- 	unsigned long start, unsigned long end);
- extern void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn);

target/linux/brcm47xx/patches-2.6.34/301-kmod-fuse-dcache-bug-r4k.patch

@@ -1,32 +0,0 @@
---- a/arch/mips/mm/c-r4k.c
-+++ b/arch/mips/mm/c-r4k.c
-@@ -373,7 +373,7 @@ static inline void local_r4k___flush_cac
- 	}
- }
- 
--static void r4k___flush_cache_all(void)
-+void r4k___flush_cache_all(void)
- {
- 	r4k_on_each_cpu(local_r4k___flush_cache_all, NULL, 1);
- }
-@@ -537,7 +537,7 @@ static inline void local_r4k_flush_cache
- 	}
- }
- 
--static void r4k_flush_cache_page(struct vm_area_struct *vma,
-+void r4k_flush_cache_page(struct vm_area_struct *vma,
- 	unsigned long addr, unsigned long pfn)
- {
- 	struct flush_cache_page_args args;
-@@ -1469,3 +1469,11 @@ void __cpuinit r4k_cache_init(void)
- 	coherency_setup();
- #endif
- }
-+
-+/* fuse package DCACHE BUG patch exports */
-+void (*fuse_flush_cache_all)(void) = r4k___flush_cache_all;
-+EXPORT_SYMBOL(fuse_flush_cache_all);
-+
-+void (*fuse_flush_cache_page)(struct vm_area_struct *vma, unsigned long page,
-+	unsigned long pfn) = r4k_flush_cache_page;
-+EXPORT_SYMBOL(fuse_flush_cache_page);

target/linux/brcm47xx/patches-2.6.34/302-kmod-fuse-dcache-bug-fuse.patch

@@ -1,82 +0,0 @@
---- a/fs/fuse/dev.c
-+++ b/fs/fuse/dev.c
-@@ -533,6 +533,11 @@ static void fuse_copy_finish(struct fuse
- 	}
- }
- 
-+#ifdef DCACHE_BUG
-+extern void (*fuse_flush_cache_all)(void);
-+extern void (*fuse_flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn);
-+#endif
-+
- /*
-  * Get another pagefull of userspace buffer, and map it to kernel
-  * address space, and lock request
-@@ -541,6 +546,9 @@ static int fuse_copy_fill(struct fuse_co
- {
- 	unsigned long offset;
- 	int err;
-+#ifdef DCACHE_BUG
-+	struct vm_area_struct *vma;
-+#endif
- 
- 	unlock_request(cs->fc, cs->req);
- 	fuse_copy_finish(cs);
-@@ -552,14 +560,22 @@ static int fuse_copy_fill(struct fuse_co
- 		cs->nr_segs--;
- 	}
- 	down_read(&current->mm->mmap_sem);
-+#ifndef DCACHE_BUG
- 	err = get_user_pages(current, current->mm, cs->addr, 1, cs->write, 0,
- 			     &cs->pg, NULL);
-+#else
-+	err = get_user_pages(current, current->mm, cs->addr, 1, cs->write, 0,
-+			     &cs->pg, &vma);
-+#endif
- 	up_read(&current->mm->mmap_sem);
- 	if (err < 0)
- 		return err;
- 	BUG_ON(err != 1);
- 	offset = cs->addr % PAGE_SIZE;
- 	cs->mapaddr = kmap_atomic(cs->pg, KM_USER0);
-+#ifdef DCACHE_BUG
-+	fuse_flush_cache_page(vma, cs->addr, page_to_pfn(cs->pg));
-+#endif
- 	cs->buf = cs->mapaddr + offset;
- 	cs->len = min(PAGE_SIZE - offset, cs->seglen);
- 	cs->seglen -= cs->len;
-@@ -573,6 +589,11 @@ static int fuse_copy_do(struct fuse_copy
- {
- 	unsigned ncpy = min(*size, cs->len);
- 	if (val) {
-+#ifdef DCACHE_BUG
-+		// patch from mailing list, it is very important, otherwise,
-+		// can't mount, or ls mount point will hang
-+		fuse_flush_cache_all();
-+#endif
- 		if (cs->write)
- 			memcpy(cs->buf, *val, ncpy);
- 		else
---- a/fs/fuse/fuse_i.h
-+++ b/fs/fuse/fuse_i.h
-@@ -8,6 +8,7 @@
- 
- #ifndef _FS_FUSE_I_H
- #define _FS_FUSE_I_H
-+#define DCACHE_BUG
- 
- #include <linux/fuse.h>
- #include <linux/fs.h>
---- a/fs/fuse/inode.c
-+++ b/fs/fuse/inode.c
-@@ -1201,6 +1201,10 @@ static int __init fuse_init(void)
- 	printk(KERN_INFO "fuse init (API version %i.%i)\n",
- 	       FUSE_KERNEL_VERSION, FUSE_KERNEL_MINOR_VERSION);
- 
-+#ifdef DCACHE_BUG
-+printk("fuse init: DCACHE_BUG enabled\n");
-+#endif
-+
- 	INIT_LIST_HEAD(&fuse_conn_list);
- 	res = fuse_fs_init();
- 	if (res)

target/linux/brcm47xx/patches-2.6.34/310-no_highpage.patch

@@ -1,66 +0,0 @@
---- a/arch/mips/include/asm/page.h
-+++ b/arch/mips/include/asm/page.h
-@@ -43,6 +43,7 @@
- #ifndef __ASSEMBLY__
- 
- #include <linux/pfn.h>
-+#include <asm/cpu-features.h>
- #include <asm/io.h>
- 
- extern void build_clear_page(void);
-@@ -78,13 +79,16 @@ static inline void clear_user_page(void
- 		flush_data_cache_page((unsigned long)addr);
- }
- 
--extern void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
--	struct page *to);
--struct vm_area_struct;
--extern void copy_user_highpage(struct page *to, struct page *from,
--	unsigned long vaddr, struct vm_area_struct *vma);
-+static inline void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
-+	struct page *to)
-+{
-+	extern void (*flush_data_cache_page)(unsigned long addr);
- 
--#define __HAVE_ARCH_COPY_USER_HIGHPAGE
-+	copy_page(vto, vfrom);
-+	if (!cpu_has_ic_fills_f_dc ||
-+	    pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
-+		flush_data_cache_page((unsigned long)vto);
-+}
- 
- /*
-  * These are used to make use of C type-checking..
---- a/arch/mips/mm/init.c
-+++ b/arch/mips/mm/init.c
-@@ -204,30 +204,6 @@ void kunmap_coherent(void)
- 	preempt_check_resched();
- }
- 
--void copy_user_highpage(struct page *to, struct page *from,
--	unsigned long vaddr, struct vm_area_struct *vma)
--{
--	void *vfrom, *vto;
--
--	vto = kmap_atomic(to, KM_USER1);
--	if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
--	    page_mapped(from) && !Page_dcache_dirty(from)) {
--		vfrom = kmap_coherent(from, vaddr);
--		copy_page(vto, vfrom);
--		kunmap_coherent();
--	} else {
--		vfrom = kmap_atomic(from, KM_USER0);
--		copy_page(vto, vfrom);
--		kunmap_atomic(vfrom, KM_USER0);
--	}
--	if ((!cpu_has_ic_fills_f_dc) ||
--	    pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
--		flush_data_cache_page((unsigned long)vto);
--	kunmap_atomic(vto, KM_USER1);
--	/* Make sure this page is cleared on other CPU's too before using it */
--	smp_wmb();
--}
--
- void copy_to_user_page(struct vm_area_struct *vma,
- 	struct page *page, unsigned long vaddr, void *dst, const void *src,
- 	unsigned long len)

target/linux/brcm47xx/patches-2.6.34/400-arch-bcm47xx.patch

@@ -1,56 +0,0 @@
---- a/arch/mips/bcm47xx/nvram.c
-+++ b/arch/mips/bcm47xx/nvram.c
-@@ -92,3 +92,30 @@ int nvram_getenv(char *name, char *val,
- 	return NVRAM_ERR_ENVNOTFOUND;
- }
- EXPORT_SYMBOL(nvram_getenv);
-+
-+char *nvram_get(const char *name)
-+{
-+	char *var, *value, *end, *eq;
-+
-+	if (!name)
-+		return NULL;
-+
-+	if (!nvram_buf[0])
-+		early_nvram_init();
-+
-+	/* Look for name=value and return value */
-+	var = &nvram_buf[sizeof(struct nvram_header)];
-+	end = nvram_buf + sizeof(nvram_buf) - 2;
-+	end[0] = end[1] = '\0';
-+	for (; *var; var = value + strlen(value) + 1) {
-+		if (!(eq = strchr(var, '=')))
-+			break;
-+		value = eq + 1;
-+		if ((eq - var) == strlen(name) && strncmp(var, name, (eq - var)) == 0)
-+			return value;
-+	}
-+
-+	return NULL;
-+}
-+
-+EXPORT_SYMBOL(nvram_get);
---- a/arch/mips/bcm47xx/setup.c
-+++ b/arch/mips/bcm47xx/setup.c
-@@ -238,3 +238,20 @@ void __init plat_mem_setup(void)
- 	_machine_halt = bcm47xx_machine_halt;
- 	pm_power_off = bcm47xx_machine_halt;
- }
-+
-+static int __init bcm47xx_register_gpiodev(void)
-+{
-+	static struct resource res = {
-+		.start = 0xFFFFFFFF,
-+	};
-+	struct platform_device *pdev;
-+
-+	pdev = platform_device_register_simple("GPIODEV", 0, &res, 1);
-+	if (!pdev) {
-+		printk(KERN_ERR "bcm47xx: GPIODEV init failed\n");
-+		return -ENODEV;
-+	}
-+
-+	return 0;
-+}
-+device_initcall(bcm47xx_register_gpiodev);

target/linux/brcm47xx/patches-2.6.34/601-mips-remove-pci-collision-check.patch

@@ -1,18 +0,0 @@
---- a/arch/mips/pci/pci.c
-+++ b/arch/mips/pci/pci.c
-@@ -185,12 +185,10 @@ static int pcibios_enable_resources(stru
- 		if ((idx == PCI_ROM_RESOURCE) &&
- 				(!(r->flags & IORESOURCE_ROM_ENABLE)))
- 			continue;
--		if (!r->start && r->end) {
--			printk(KERN_ERR "PCI: Device %s not available "
--			       "because of resource collisions\n",
-+		if (!r->start && r->end)
-+			printk(KERN_WARNING "PCI: Device %s resource"
-+			       "collisions detected. Ignoring...\n",
- 			       pci_name(dev));
--			return -EINVAL;
--		}
- 		if (r->flags & IORESOURCE_IO)
- 			cmd |= PCI_COMMAND_IO;
- 		if (r->flags & IORESOURCE_MEM)

target/linux/brcm47xx/patches-2.6.34/610-pci_ide_fix.patch

@@ -1,14 +0,0 @@
---- a/include/linux/ide.h
-+++ b/include/linux/ide.h
-@@ -195,7 +195,11 @@ static inline void ide_std_init_ports(st
- 	hw->io_ports.ctl_addr = ctl_addr;
- }
- 
-+#if defined CONFIG_BCM47XX
-+# define MAX_HWIFS	2
-+#else
- #define MAX_HWIFS	10
-+#endif
- 
- /*
-  * Now for the data we need to maintain per-drive:  ide_drive_t

target/linux/brcm47xx/patches-2.6.34/700-ssb-gigabit-ethernet-driver.patch

@@ -1,329 +0,0 @@
---- a/drivers/net/tg3.c
-+++ b/drivers/net/tg3.c
-@@ -41,6 +41,7 @@
- #include <linux/prefetch.h>
- #include <linux/dma-mapping.h>
- #include <linux/firmware.h>
-+#include <linux/ssb/ssb_driver_gige.h>
- 
- #include <net/checksum.h>
- #include <net/ip.h>
-@@ -471,8 +472,9 @@ static void _tw32_flush(struct tg3 *tp,
- static inline void tw32_mailbox_flush(struct tg3 *tp, u32 off, u32 val)
- {
- 	tp->write32_mbox(tp, off, val);
--	if (!(tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER) &&
--	    !(tp->tg3_flags2 & TG3_FLG2_ICH_WORKAROUND))
-+	if ((tp->tg3_flags3 & TG3_FLG3_FLUSH_POSTED_WRITES) ||
-+	    (!(tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER) &&
-+	     !(tp->tg3_flags2 & TG3_FLG2_ICH_WORKAROUND)))
- 		tp->read32_mbox(tp, off);
- }
- 
-@@ -482,7 +484,7 @@ static void tg3_write32_tx_mbox(struct t
- 	writel(val, mbox);
- 	if (tp->tg3_flags & TG3_FLAG_TXD_MBOX_HWBUG)
- 		writel(val, mbox);
--	if (tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER)
-+	if ((tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER) || (tp->tg3_flags3 & TG3_FLG3_FLUSH_POSTED_WRITES))
- 		readl(mbox);
- }
- 
-@@ -783,7 +785,7 @@ static void tg3_switch_clocks(struct tg3
- 
- #define PHY_BUSY_LOOPS	5000
- 
--static int tg3_readphy(struct tg3 *tp, int reg, u32 *val)
-+static int __tg3_readphy(struct tg3 *tp, unsigned int phy_addr, int reg, u32 *val)
- {
- 	u32 frame_val;
- 	unsigned int loops;
-@@ -797,7 +799,7 @@ static int tg3_readphy(struct tg3 *tp, i
- 
- 	*val = 0x0;
- 
--	frame_val  = ((tp->phy_addr << MI_COM_PHY_ADDR_SHIFT) &
-+	frame_val  = ((phy_addr << MI_COM_PHY_ADDR_SHIFT) &
- 		      MI_COM_PHY_ADDR_MASK);
- 	frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
- 		      MI_COM_REG_ADDR_MASK);
-@@ -832,7 +834,12 @@ static int tg3_readphy(struct tg3 *tp, i
- 	return ret;
- }
- 
--static int tg3_writephy(struct tg3 *tp, int reg, u32 val)
-+static int tg3_readphy(struct tg3 *tp, int reg, u32 *val)
-+{
-+	return __tg3_readphy(tp, tp->phy_addr, reg, val);
-+}
-+
-+static int __tg3_writephy(struct tg3 *tp, unsigned int phy_addr, int reg, u32 val)
- {
- 	u32 frame_val;
- 	unsigned int loops;
-@@ -848,7 +855,7 @@ static int tg3_writephy(struct tg3 *tp,
- 		udelay(80);
- 	}
- 
--	frame_val  = ((tp->phy_addr << MI_COM_PHY_ADDR_SHIFT) &
-+	frame_val  = ((phy_addr << MI_COM_PHY_ADDR_SHIFT) &
- 		      MI_COM_PHY_ADDR_MASK);
- 	frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
- 		      MI_COM_REG_ADDR_MASK);
-@@ -881,6 +888,11 @@ static int tg3_writephy(struct tg3 *tp,
- 	return ret;
- }
- 
-+static int tg3_writephy(struct tg3 *tp, int reg, u32 val)
-+{
-+	return __tg3_writephy(tp, tp->phy_addr, reg, val);
-+}
-+
- static int tg3_bmcr_reset(struct tg3 *tp)
- {
- 	u32 phy_control;
-@@ -2389,6 +2401,9 @@ static int tg3_nvram_read(struct tg3 *tp
- {
- 	int ret;
- 
-+	if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE)
-+		return -ENODEV;
-+
- 	if (!(tp->tg3_flags & TG3_FLAG_NVRAM))
- 		return tg3_nvram_read_using_eeprom(tp, offset, val);
- 
-@@ -2720,8 +2735,10 @@ static int tg3_set_power_state(struct tg
- 	tg3_frob_aux_power(tp);
- 
- 	/* Workaround for unstable PLL clock */
--	if ((GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_AX) ||
--	    (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_BX)) {
-+	if ((tp->phy_id & TG3_PHY_ID_MASK) != TG3_PHY_ID_BCM5750_2 &&
-+				/* !!! FIXME !!! */
-+	    ((GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_AX) ||
-+	    (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_BX))) {
- 		u32 val = tr32(0x7d00);
- 
- 		val &= ~((1 << 16) | (1 << 4) | (1 << 2) | (1 << 1) | 1);
-@@ -3214,6 +3231,14 @@ relink:
- 
- 		tg3_phy_copper_begin(tp);
- 
-+		if (tp->tg3_flags3 & TG3_FLG3_ROBOSWITCH) {
-+			current_link_up = 1;
-+			current_speed = SPEED_1000; /* FIXME */
-+			current_duplex = DUPLEX_FULL;
-+			tp->link_config.active_speed = current_speed;
-+			tp->link_config.active_duplex = current_duplex;
-+		}
-+
- 		tg3_readphy(tp, MII_BMSR, &tmp);
- 		if (!tg3_readphy(tp, MII_BMSR, &tmp) &&
- 		    (tmp & BMSR_LSTATUS))
-@@ -6675,6 +6700,11 @@ static int tg3_poll_fw(struct tg3 *tp)
- 	int i;
- 	u32 val;
- 
-+	if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
-+		/* We don't use firmware. */
-+		return 0;
-+	}
-+
- 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
- 		/* Wait up to 20ms for init done. */
- 		for (i = 0; i < 200; i++) {
-@@ -6958,6 +6988,14 @@ static int tg3_chip_reset(struct tg3 *tp
- 		tw32(0x5000, 0x400);
- 	}
- 
-+	if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
-+		/* BCM4785: In order to avoid repercussions from using potentially
-+		 * defective internal ROM, stop the Rx RISC CPU, which is not
-+		 * required. */
-+		tg3_stop_fw(tp);
-+		tg3_halt_cpu(tp, RX_CPU_BASE);
-+	}
-+
- 	tw32(GRC_MODE, tp->grc_mode);
- 
- 	if (tp->pci_chip_rev_id == CHIPREV_ID_5705_A0) {
-@@ -7135,9 +7173,12 @@ static int tg3_halt_cpu(struct tg3 *tp,
- 		return -ENODEV;
- 	}
- 
--	/* Clear firmware's nvram arbitration. */
--	if (tp->tg3_flags & TG3_FLAG_NVRAM)
--		tw32(NVRAM_SWARB, SWARB_REQ_CLR0);
-+	if (!(tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE)) {
-+		/* Clear firmware's nvram arbitration. */
-+		if (tp->tg3_flags & TG3_FLAG_NVRAM)
-+			tw32(NVRAM_SWARB, SWARB_REQ_CLR0);
-+	}
-+
- 	return 0;
- }
- 
-@@ -7199,6 +7240,11 @@ static int tg3_load_5701_a0_firmware_fix
- 	const __be32 *fw_data;
- 	int err, i;
- 
-+	if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
-+		/* We don't use firmware. */
-+		return 0;
-+	}
-+
- 	fw_data = (void *)tp->fw->data;
- 
- 	/* Firmware blob starts with version numbers, followed by
-@@ -7256,6 +7302,11 @@ static int tg3_load_tso_firmware(struct
- 	unsigned long cpu_base, cpu_scratch_base, cpu_scratch_size;
- 	int err, i;
- 
-+	if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
-+		/* We don't use firmware. */
-+		return 0;
-+	}
-+
- 	if (tp->tg3_flags2 & TG3_FLG2_HW_TSO)
- 		return 0;
- 
-@@ -8380,6 +8431,11 @@ static void tg3_timer(unsigned long __op
- 
- 	spin_lock(&tp->lock);
- 
-+	if (tp->tg3_flags3 & TG3_FLG3_FLUSH_POSTED_WRITES) {
-+		/* BCM4785: Flush posted writes from GbE to host memory. */
-+		tr32(HOSTCC_MODE);
-+	}
-+
- 	if (!(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)) {
- 		/* All of this garbage is because when using non-tagged
- 		 * IRQ status the mailbox/status_block protocol the chip
-@@ -10279,6 +10335,11 @@ static int tg3_test_nvram(struct tg3 *tp
- 	if (tp->tg3_flags3 & TG3_FLG3_NO_NVRAM)
- 		return 0;
- 
-+	if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
-+		/* We don't have NVRAM. */
-+		return 0;
-+	}
-+
- 	if (tg3_nvram_read(tp, 0, &magic) != 0)
- 		return -EIO;
- 
-@@ -11098,7 +11159,7 @@ static int tg3_ioctl(struct net_device *
- 			return -EAGAIN;
- 
- 		spin_lock_bh(&tp->lock);
--		err = tg3_readphy(tp, data->reg_num & 0x1f, &mii_regval);
-+		err = __tg3_readphy(tp, data->phy_id & 0x1f, data->reg_num & 0x1f, &mii_regval);
- 		spin_unlock_bh(&tp->lock);
- 
- 		data->val_out = mii_regval;
-@@ -11114,7 +11175,7 @@ static int tg3_ioctl(struct net_device *
- 			return -EAGAIN;
- 
- 		spin_lock_bh(&tp->lock);
--		err = tg3_writephy(tp, data->reg_num & 0x1f, data->val_in);
-+		err = __tg3_writephy(tp, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in);
- 		spin_unlock_bh(&tp->lock);
- 
- 		return err;
-@@ -11759,6 +11820,12 @@ static void __devinit tg3_get_5717_nvram
- /* Chips other than 5700/5701 use the NVRAM for fetching info. */
- static void __devinit tg3_nvram_init(struct tg3 *tp)
- {
-+	if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
-+		/* No NVRAM and EEPROM on the SSB Broadcom GigE core. */
-+		tp->tg3_flags &= ~(TG3_FLAG_NVRAM | TG3_FLAG_NVRAM_BUFFERED);
-+		return;
-+	}
-+
- 	tw32_f(GRC_EEPROM_ADDR,
- 	     (EEPROM_ADDR_FSM_RESET |
- 	      (EEPROM_DEFAULT_CLOCK_PERIOD <<
-@@ -12020,6 +12087,9 @@ static int tg3_nvram_write_block(struct
- {
- 	int ret;
- 
-+	if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE)
-+		return -ENODEV;
-+
- 	if (tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT) {
- 		tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl &
- 		       ~GRC_LCLCTRL_GPIO_OUTPUT1);
-@@ -13360,6 +13430,11 @@ static int __devinit tg3_get_invariants(
- 	      GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701)))
- 		tp->tg3_flags |= TG3_FLAG_SRAM_USE_CONFIG;
- 
-+	if (tp->tg3_flags3 & TG3_FLG3_FLUSH_POSTED_WRITES) {
-+		tp->write32_tx_mbox = tg3_write_flush_reg32;
-+		tp->write32_rx_mbox = tg3_write_flush_reg32;
-+	}
-+
- 	/* Get eeprom hw config before calling tg3_set_power_state().
- 	 * In particular, the TG3_FLG2_IS_NIC flag must be
- 	 * determined before calling tg3_set_power_state() so that
-@@ -13753,6 +13828,10 @@ static int __devinit tg3_get_device_addr
- 	}
- 
- 	if (!is_valid_ether_addr(&dev->dev_addr[0])) {
-+		if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE)
-+			ssb_gige_get_macaddr(tp->pdev, &dev->dev_addr[0]);
-+	}
-+	if (!is_valid_ether_addr(&dev->dev_addr[0])) {
- #ifdef CONFIG_SPARC
- 		if (!tg3_get_default_macaddr_sparc(tp))
- 			return 0;
-@@ -14272,6 +14351,7 @@ static char * __devinit tg3_phy_string(s
- 	case TG3_PHY_ID_BCM5704:	return "5704";
- 	case TG3_PHY_ID_BCM5705:	return "5705";
- 	case TG3_PHY_ID_BCM5750:	return "5750";
-+	case TG3_PHY_ID_BCM5750_2:	return "5750-2";
- 	case TG3_PHY_ID_BCM5752:	return "5752";
- 	case TG3_PHY_ID_BCM5714:	return "5714";
- 	case TG3_PHY_ID_BCM5780:	return "5780";
-@@ -14481,6 +14561,13 @@ static int __devinit tg3_init_one(struct
- 		tp->msg_enable = tg3_debug;
- 	else
- 		tp->msg_enable = TG3_DEF_MSG_ENABLE;
-+	if (pdev_is_ssb_gige_core(pdev)) {
-+		tp->tg3_flags3 |= TG3_FLG3_IS_SSB_CORE;
-+		if (ssb_gige_must_flush_posted_writes(pdev))
-+			tp->tg3_flags3 |= TG3_FLG3_FLUSH_POSTED_WRITES;
-+		if (ssb_gige_have_roboswitch(pdev))
-+			tp->tg3_flags3 |= TG3_FLG3_ROBOSWITCH;
-+	}
- 
- 	/* The word/byte swap controls here control register access byte
- 	 * swapping.  DMA data byte swapping is controlled in the GRC_MODE
---- a/drivers/net/tg3.h
-+++ b/drivers/net/tg3.h
-@@ -2014,6 +2014,9 @@
- #define  NIC_SRAM_RGMII_INBAND_DISABLE	 0x00000004
- #define  NIC_SRAM_RGMII_EXT_IBND_RX_EN	 0x00000008
- #define  NIC_SRAM_RGMII_EXT_IBND_TX_EN	 0x00000010
-+#define TG3_FLG3_IS_SSB_CORE		0x00000800
-+#define TG3_FLG3_FLUSH_POSTED_WRITES	0x00001000
-+#define TG3_FLG3_ROBOSWITCH		0x00002000
- 
- #define NIC_SRAM_RX_MINI_BUFFER_DESC	0x00001000
- 
-@@ -2930,6 +2933,7 @@ struct tg3 {
- #define TG3_PHY_ID_BCM5704		0x60008190
- #define TG3_PHY_ID_BCM5705		0x600081a0
- #define TG3_PHY_ID_BCM5750		0x60008180
-+#define TG3_PHY_ID_BCM5750_2		0xbc050cd0
- #define TG3_PHY_ID_BCM5752		0x60008100
- #define TG3_PHY_ID_BCM5714		0x60008340
- #define TG3_PHY_ID_BCM5780		0x60008350
-@@ -2964,7 +2968,8 @@ struct tg3 {
- 	 (X) == TG3_PHY_ID_BCM5755 || (X) == TG3_PHY_ID_BCM5756 || \
- 	 (X) == TG3_PHY_ID_BCM5906 || (X) == TG3_PHY_ID_BCM5761 || \
- 	 (X) == TG3_PHY_ID_BCM5718C || (X) == TG3_PHY_ID_BCM5718S || \
--	 (X) == TG3_PHY_ID_BCM57765 || (X) == TG3_PHY_ID_BCM8002)
-+	 (X) == TG3_PHY_ID_BCM57765 || (X) == TG3_PHY_ID_BCM8002 || \
-+	 (X) == TG3_PHY_ID_BCM5750_2)
- 
- 	u32				led_ctrl;
- 	u32				phy_otp;

target/linux/brcm47xx/patches-2.6.34/812-disable_wgt634u_crap.patch

@@ -1,177 +0,0 @@
---- a/arch/mips/bcm47xx/Makefile
-+++ b/arch/mips/bcm47xx/Makefile
-@@ -3,4 +3,4 @@
- # under Linux.
- #
- 
--obj-y := gpio.o irq.o nvram.o prom.o serial.o setup.o time.o wgt634u.o
-+obj-y := gpio.o irq.o nvram.o prom.o serial.o setup.o time.o
---- a/arch/mips/bcm47xx/wgt634u.c
-+++ /dev/null
-@@ -1,166 +0,0 @@
--/*
-- * This file is subject to the terms and conditions of the GNU General Public
-- * License.  See the file "COPYING" in the main directory of this archive
-- * for more details.
-- *
-- * Copyright (C) 2007 Aurelien Jarno <[email protected]>
-- */
--
--#include <linux/platform_device.h>
--#include <linux/module.h>
--#include <linux/leds.h>
--#include <linux/mtd/physmap.h>
--#include <linux/ssb/ssb.h>
--#include <linux/interrupt.h>
--#include <linux/reboot.h>
--#include <linux/gpio.h>
--#include <asm/mach-bcm47xx/bcm47xx.h>
--
--/* GPIO definitions for the WGT634U */
--#define WGT634U_GPIO_LED	3
--#define WGT634U_GPIO_RESET	2
--#define WGT634U_GPIO_TP1	7
--#define WGT634U_GPIO_TP2	6
--#define WGT634U_GPIO_TP3	5
--#define WGT634U_GPIO_TP4	4
--#define WGT634U_GPIO_TP5	1
--
--static struct gpio_led wgt634u_leds[] = {
--	{
--		.name = "power",
--		.gpio = WGT634U_GPIO_LED,
--		.active_low = 1,
--		.default_trigger = "heartbeat",
--	},
--};
--
--static struct gpio_led_platform_data wgt634u_led_data = {
--	.num_leds =     ARRAY_SIZE(wgt634u_leds),
--	.leds =         wgt634u_leds,
--};
--
--static struct platform_device wgt634u_gpio_leds = {
--	.name =         "leds-gpio",
--	.id =           -1,
--	.dev = {
--		.platform_data = &wgt634u_led_data,
--	}
--};
--
--
--/* 8MiB flash. The struct mtd_partition matches original Netgear WGT634U
--   firmware. */
--static struct mtd_partition wgt634u_partitions[] = {
--	{
--		.name       = "cfe",
--		.offset     = 0,
--		.size       = 0x60000,		/* 384k */
--		.mask_flags = MTD_WRITEABLE 	/* force read-only */
--	},
--	{
--		.name   = "config",
--		.offset = 0x60000,
--		.size   = 0x20000		/* 128k */
--	},
--	{
--		.name   = "linux",
--		.offset = 0x80000,
--		.size   = 0x140000 		/* 1280k */
--	},
--	{
--		.name   = "jffs",
--		.offset = 0x1c0000,
--		.size   = 0x620000 		/* 6272k */
--	},
--	{
--		.name   = "nvram",
--		.offset = 0x7e0000,
--		.size   = 0x20000		/* 128k */
--	},
--};
--
--static struct physmap_flash_data wgt634u_flash_data = {
--	.parts    = wgt634u_partitions,
--	.nr_parts = ARRAY_SIZE(wgt634u_partitions)
--};
--
--static struct resource wgt634u_flash_resource = {
--	.flags = IORESOURCE_MEM,
--};
--
--static struct platform_device wgt634u_flash = {
--	.name          = "physmap-flash",
--	.id            = 0,
--	.dev           = { .platform_data = &wgt634u_flash_data, },
--	.resource      = &wgt634u_flash_resource,
--	.num_resources = 1,
--};
--
--/* Platform devices */
--static struct platform_device *wgt634u_devices[] __initdata = {
--	&wgt634u_flash,
--	&wgt634u_gpio_leds,
--};
--
--static irqreturn_t gpio_interrupt(int irq, void *ignored)
--{
--	int state;
--
--	/* Interrupts are shared, check if the current one is
--	   a GPIO interrupt. */
--	if (!ssb_chipco_irq_status(&ssb_bcm47xx.chipco,
--				   SSB_CHIPCO_IRQ_GPIO))
--		return IRQ_NONE;
--
--	state = gpio_get_value(WGT634U_GPIO_RESET);
--
--	/* Interrupt are level triggered, revert the interrupt polarity
--	   to clear the interrupt. */
--	gpio_polarity(WGT634U_GPIO_RESET, state);
--
--	if (!state) {
--		printk(KERN_INFO "Reset button pressed");
--		ctrl_alt_del();
--	}
--
--	return IRQ_HANDLED;
--}
--
--static int __init wgt634u_init(void)
--{
--	/* There is no easy way to detect that we are running on a WGT634U
--	 * machine. Use the MAC address as an heuristic. Netgear Inc. has
--	 * been allocated ranges 00:09:5b:xx:xx:xx and 00:0f:b5:xx:xx:xx.
--	 */
--
--	u8 *et0mac = ssb_bcm47xx.sprom.et0mac;
--
--	if (et0mac[0] == 0x00 &&
--	    ((et0mac[1] == 0x09 && et0mac[2] == 0x5b) ||
--	     (et0mac[1] == 0x0f && et0mac[2] == 0xb5))) {
--		struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore;
--
--		printk(KERN_INFO "WGT634U machine detected.\n");
--
--		if (!request_irq(gpio_to_irq(WGT634U_GPIO_RESET),
--				 gpio_interrupt, IRQF_SHARED,
--				 "WGT634U GPIO", &ssb_bcm47xx.chipco)) {
--			gpio_direction_input(WGT634U_GPIO_RESET);
--			gpio_intmask(WGT634U_GPIO_RESET, 1);
--			ssb_chipco_irq_mask(&ssb_bcm47xx.chipco,
--					    SSB_CHIPCO_IRQ_GPIO,
--					    SSB_CHIPCO_IRQ_GPIO);
--		}
--
--		wgt634u_flash_data.width = mcore->flash_buswidth;
--		wgt634u_flash_resource.start = mcore->flash_window;
--		wgt634u_flash_resource.end = mcore->flash_window
--					   + mcore->flash_window_size
--					   - 1;
--		return platform_add_devices(wgt634u_devices,
--					    ARRAY_SIZE(wgt634u_devices));
--	} else
--		return -ENODEV;
--}
--
--module_init(wgt634u_init);

target/linux/brcm47xx/patches-2.6.34/820-wgt634u-nvram-fix.patch

@@ -1,305 +0,0 @@
-The Netgear wgt634u uses a different format for storing the 
-configuration. This patch is needed to read out the correct 
-configuration. The cfe_env.c file uses a different method way to read 
-out the configuration than the in kernel cfe config reader.
-
---- a/arch/mips/bcm47xx/Makefile
-+++ b/arch/mips/bcm47xx/Makefile
-@@ -3,4 +3,4 @@
- # under Linux.
- #
- 
--obj-y := gpio.o irq.o nvram.o prom.o serial.o setup.o time.o
-+obj-y := gpio.o irq.o nvram.o prom.o serial.o setup.o time.o cfe_env.o
---- /dev/null
-+++ b/arch/mips/bcm47xx/cfe_env.c
-@@ -0,0 +1,229 @@
-+/*
-+ * CFE environment variable access
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation
-+ * Copyright 2006, Felix Fietkau <[email protected]>
-+ * 
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <asm/io.h>
-+#include <asm/uaccess.h>
-+
-+#define NVRAM_SIZE       (0x1ff0)
-+static char _nvdata[NVRAM_SIZE];
-+static char _valuestr[256];
-+
-+/*
-+ * TLV types.  These codes are used in the "type-length-value"
-+ * encoding of the items stored in the NVRAM device (flash or EEPROM)
-+ *
-+ * The layout of the flash/nvram is as follows:
-+ *
-+ * <type> <length> <data ...> <type> <length> <data ...> <type_end>
-+ *
-+ * The type code of "ENV_TLV_TYPE_END" marks the end of the list.
-+ * The "length" field marks the length of the data section, not
-+ * including the type and length fields.
-+ *
-+ * Environment variables are stored as follows:
-+ *
-+ * <type_env> <length> <flags> <name> = <value>
-+ *
-+ * If bit 0 (low bit) is set, the length is an 8-bit value.
-+ * If bit 0 (low bit) is clear, the length is a 16-bit value
-+ * 
-+ * Bit 7 set indicates "user" TLVs.  In this case, bit 0 still
-+ * indicates the size of the length field.  
-+ *
-+ * Flags are from the constants below:
-+ *
-+ */
-+#define ENV_LENGTH_16BITS	0x00	/* for low bit */
-+#define ENV_LENGTH_8BITS	0x01
-+
-+#define ENV_TYPE_USER		0x80
-+
-+#define ENV_CODE_SYS(n,l) (((n)<<1)|(l))
-+#define ENV_CODE_USER(n,l) ((((n)<<1)|(l)) | ENV_TYPE_USER)
-+
-+/*
-+ * The actual TLV types we support
-+ */
-+
-+#define ENV_TLV_TYPE_END	0x00	
-+#define ENV_TLV_TYPE_ENV	ENV_CODE_SYS(0,ENV_LENGTH_8BITS)
-+
-+/*
-+ * Environment variable flags 
-+ */
-+
-+#define ENV_FLG_NORMAL		0x00	/* normal read/write */
-+#define ENV_FLG_BUILTIN		0x01	/* builtin - not stored in flash */
-+#define ENV_FLG_READONLY	0x02	/* read-only - cannot be changed */
-+
-+#define ENV_FLG_MASK		0xFF	/* mask of attributes we keep */
-+#define ENV_FLG_ADMIN		0x100	/* lets us internally override permissions */
-+
-+
-+/*  *********************************************************************
-+    *  _nvram_read(buffer,offset,length)
-+    *  
-+    *  Read data from the NVRAM device
-+    *  
-+    *  Input parameters: 
-+    *  	   buffer - destination buffer
-+    *  	   offset - offset of data to read
-+    *  	   length - number of bytes to read
-+    *  	   
-+    *  Return value:
-+    *  	   number of bytes read, or <0 if error occured
-+    ********************************************************************* */
-+static int
-+_nvram_read(unsigned char *nv_buf, unsigned char *buffer, int offset, int length)
-+{
-+    int i;
-+    if (offset > NVRAM_SIZE)
-+	return -1; 
-+
-+    for ( i = 0; i < length; i++) {
-+	buffer[i] = ((volatile unsigned char*)nv_buf)[offset + i];
-+    }
-+    return length;
-+}
-+
-+
-+static char*
-+_strnchr(const char *dest,int c,size_t cnt)
-+{
-+	while (*dest && (cnt > 0)) {
-+	if (*dest == c) return (char *) dest;
-+	dest++;
-+	cnt--;
-+	}
-+	return NULL;
-+}
-+
-+
-+
-+/*
-+ * Core support API: Externally visible.
-+ */
-+
-+/*
-+ * Get the value of an NVRAM variable
-+ * @param	name	name of variable to get
-+ * @return	value of variable or NULL if undefined
-+ */
-+
-+char* 
-+cfe_env_get(unsigned char *nv_buf, char* name)
-+{
-+    int size;
-+    unsigned char *buffer;
-+    unsigned char *ptr;
-+    unsigned char *envval;
-+    unsigned int reclen;
-+    unsigned int rectype;
-+    int offset;
-+    int flg;
-+    
-+	if (!strcmp(name, "nvram_type"))
-+		return "cfe";
-+	
-+    size = NVRAM_SIZE;
-+    buffer = &_nvdata[0];
-+
-+    ptr = buffer;
-+    offset = 0;
-+
-+    /* Read the record type and length */
-+    if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
-+	goto error;
-+    }
-+    
-+    while ((*ptr != ENV_TLV_TYPE_END)  && (size > 1)) {
-+
-+	/* Adjust pointer for TLV type */
-+	rectype = *(ptr);
-+	offset++;
-+	size--;
-+
-+	/* 
-+	 * Read the length.  It can be either 1 or 2 bytes
-+	 * depending on the code 
-+	 */
-+	if (rectype & ENV_LENGTH_8BITS) {
-+	    /* Read the record type and length - 8 bits */
-+	    if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
-+		goto error;
-+	    }
-+	    reclen = *(ptr);
-+	    size--;
-+	    offset++;
-+	}
-+	else {
-+	    /* Read the record type and length - 16 bits, MSB first */
-+	    if (_nvram_read(nv_buf, ptr,offset,2) != 2) {
-+		goto error;
-+	    }
-+	    reclen = (((unsigned int) *(ptr)) << 8) + (unsigned int) *(ptr+1);
-+	    size -= 2;
-+	    offset += 2;
-+	}
-+
-+	if (reclen > size)
-+	    break;	/* should not happen, bad NVRAM */
-+
-+	switch (rectype) {
-+	    case ENV_TLV_TYPE_ENV:
-+		/* Read the TLV data */
-+		if (_nvram_read(nv_buf, ptr,offset,reclen) != reclen)
-+		    goto error;
-+		flg = *ptr++;
-+		envval = (unsigned char *) _strnchr(ptr,'=',(reclen-1));
-+		if (envval) {
-+		    *envval++ = '\0';
-+		    memcpy(_valuestr,envval,(reclen-1)-(envval-ptr));
-+		    _valuestr[(reclen-1)-(envval-ptr)] = '\0';
-+#if 0			
-+		    printk(KERN_INFO "NVRAM:%s=%s\n", ptr, _valuestr);
-+#endif
-+		    if(!strcmp(ptr, name)){
-+			return _valuestr;
-+		    }
-+		    if((strlen(ptr) > 1) && !strcmp(&ptr[1], name))
-+			return _valuestr;
-+		}
-+		break;
-+		
-+	    default: 
-+		/* Unknown TLV type, skip it. */
-+		break;
-+	    }
-+
-+	/*
-+	 * Advance to next TLV 
-+	 */
-+		
-+	size -= (int)reclen;
-+	offset += reclen;
-+
-+	/* Read the next record type */
-+	ptr = buffer;
-+	if (_nvram_read(nv_buf, ptr,offset,1) != 1)
-+	    goto error;
-+	}
-+
-+error:
-+    return NULL;
-+
-+}
-+
---- a/arch/mips/bcm47xx/nvram.c
-+++ b/arch/mips/bcm47xx/nvram.c
-@@ -21,6 +21,8 @@
- #include <asm/mach-bcm47xx/bcm47xx.h>
- 
- static char nvram_buf[NVRAM_SPACE];
-+static int cfe_env;
-+extern char *cfe_env_get(char *nv_buf, const char *name);
- 
- /* Probe for NVRAM header */
- static void __init early_nvram_init(void)
-@@ -33,6 +35,25 @@ static void __init early_nvram_init(void
- 
- 	base = mcore->flash_window;
- 	lim = mcore->flash_window_size;
-+	cfe_env = 0;
-+
-+	/* XXX: hack for supporting the CFE environment stuff on WGT634U */
-+	if (lim >= 8 * 1024 * 1024) {
-+		src = (u32 *) KSEG1ADDR(base + 8 * 1024 * 1024 - 0x2000);
-+		dst = (u32 *) nvram_buf;
-+
-+		if ((*src & 0xff00ff) == 0x000001) {
-+			printk("early_nvram_init: WGT634U NVRAM found.\n");
-+
-+			for (i = 0; i < 0x1ff0; i++) {
-+				if (*src == 0xFFFFFFFF)
-+					break;
-+				*dst++ = *src++;
-+			}
-+			cfe_env = 1;
-+			return;
-+		}
-+	}
- 
- 	off = FLASH_MIN;
- 	while (off <= lim) {
-@@ -74,6 +95,12 @@ int nvram_getenv(char *name, char *val,
- 	if (!nvram_buf[0])
- 		early_nvram_init();
- 
-+	if (cfe_env) {
-+		value = cfe_env_get(nvram_buf, name);
-+		snprintf(val, val_len, "%s", value);
-+		return 0;
-+	}
-+
- 	/* Look for name=value and return value */
- 	var = &nvram_buf[sizeof(struct nvram_header)];
- 	end = nvram_buf + sizeof(nvram_buf) - 2;
-@@ -103,6 +130,9 @@ char *nvram_get(const char *name)
- 	if (!nvram_buf[0])
- 		early_nvram_init();
- 
-+	if (cfe_env)
-+		return cfe_env_get(nvram_buf, name);
-+
- 	/* Look for name=value and return value */
- 	var = &nvram_buf[sizeof(struct nvram_header)];
- 	end = nvram_buf + sizeof(nvram_buf) - 2;

target/linux/brcm47xx/patches-2.6.34/900-bcm47xx_wdt-noprescale.patch

@@ -1,89 +0,0 @@
---- a/drivers/watchdog/bcm47xx_wdt.c
-+++ b/drivers/watchdog/bcm47xx_wdt.c
-@@ -31,6 +31,7 @@
- 
- #define WDT_DEFAULT_TIME	30	/* seconds */
- #define WDT_MAX_TIME		255	/* seconds */
-+#define WDT_SHIFT		15	/* 32.768 KHz on cores with slow WDT clock */
- 
- static int wdt_time = WDT_DEFAULT_TIME;
- static int nowayout = WATCHDOG_NOWAYOUT;
-@@ -50,11 +51,11 @@ static unsigned long bcm47xx_wdt_busy;
- static char expect_release;
- static struct timer_list wdt_timer;
- static atomic_t ticks;
-+static int needs_sw_scale;
- 
--static inline void bcm47xx_wdt_hw_start(void)
-+static inline void bcm47xx_wdt_hw_start(u32 ticks)
- {
--	/* this is 2,5s on 100Mhz clock  and 2s on 133 Mhz */
--	ssb_watchdog_timer_set(&ssb_bcm47xx, 0xfffffff);
-+ 	ssb_watchdog_timer_set(&ssb_bcm47xx, ticks);
- }
- 
- static inline int bcm47xx_wdt_hw_stop(void)
-@@ -65,33 +66,34 @@ static inline int bcm47xx_wdt_hw_stop(vo
- static void bcm47xx_timer_tick(unsigned long unused)
- {
- 	if (!atomic_dec_and_test(&ticks)) {
--		bcm47xx_wdt_hw_start();
-+		/* This is 2,5s on 100Mhz clock and 2s on 133 Mhz */
-+		bcm47xx_wdt_hw_start(0xfffffff);
- 		mod_timer(&wdt_timer, jiffies + HZ);
- 	} else {
--		printk(KERN_CRIT DRV_NAME "Watchdog will fire soon!!!\n");
-+		printk(KERN_CRIT DRV_NAME ": Watchdog will fire soon!!!\n");
- 	}
- }
- 
--static inline void bcm47xx_wdt_pet(void)
-+static void bcm47xx_wdt_pet(void)
- {
--	atomic_set(&ticks, wdt_time);
-+	if(needs_sw_scale)
-+		atomic_set(&ticks, wdt_time);
-+	else
-+		bcm47xx_wdt_hw_start(wdt_time << WDT_SHIFT);
- }
- 
- static void bcm47xx_wdt_start(void)
- {
- 	bcm47xx_wdt_pet();
--	bcm47xx_timer_tick(0);
--}
--
--static void bcm47xx_wdt_pause(void)
--{
--	del_timer_sync(&wdt_timer);
--	bcm47xx_wdt_hw_stop();
-+	if(needs_sw_scale)
-+		bcm47xx_timer_tick(0);
- }
- 
- static void bcm47xx_wdt_stop(void)
- {
--	bcm47xx_wdt_pause();
-+	if(needs_sw_scale)
-+		del_timer_sync(&wdt_timer);
-+	bcm47xx_wdt_hw_stop();
- }
- 
- static int bcm47xx_wdt_settimeout(int new_time)
-@@ -243,7 +245,15 @@ static int __init bcm47xx_wdt_init(void)
- 	if (bcm47xx_wdt_hw_stop() < 0)
- 		return -ENODEV;
- 
--	setup_timer(&wdt_timer, bcm47xx_timer_tick, 0L);
-+	/* FIXME Other cores */
-+	if(ssb_bcm47xx.chip_id == 0x5354) {
-+		/* Slow WDT clock, no pre-scaling */
-+		needs_sw_scale = 0;
-+	} else {
-+		/* Fast WDT clock, needs software pre-scaling */
-+		needs_sw_scale = 1;
-+		setup_timer(&wdt_timer, bcm47xx_timer_tick, 0L);
-+	}
- 
- 	if (bcm47xx_wdt_settimeout(wdt_time)) {
- 		bcm47xx_wdt_settimeout(WDT_DEFAULT_TIME);

target/linux/brcm47xx/patches-2.6.34/920-cache-wround.patch

@@ -1,138 +0,0 @@
---- a/arch/mips/include/asm/r4kcache.h
-+++ b/arch/mips/include/asm/r4kcache.h
-@@ -20,10 +20,28 @@
- #ifdef CONFIG_BCM47XX
- #include <asm/paccess.h>
- #include <linux/ssb/ssb.h>
--#define BCM4710_DUMMY_RREG() ((void) *((u8 *) KSEG1ADDR(SSB_ENUM_BASE)))
-+#define BCM4710_DUMMY_RREG() bcm4710_dummy_rreg()
-+
-+static inline unsigned long bcm4710_dummy_rreg(void)
-+{
-+      return *(volatile unsigned long *)(KSEG1ADDR(SSB_ENUM_BASE));
-+}
-+
-+#define BCM4710_FILL_TLB(addr) bcm4710_fill_tlb((void *)(addr))
-+
-+static inline unsigned long bcm4710_fill_tlb(void *addr)
-+{
-+      return *(unsigned long *)addr;
-+}
-+
-+#define BCM4710_PROTECTED_FILL_TLB(addr) bcm4710_protected_fill_tlb((void *)(addr))
-+
-+static inline void bcm4710_protected_fill_tlb(void *addr)
-+{
-+      unsigned long x;
-+      get_dbe(x, (unsigned long *)addr);;
-+}
- 
--#define BCM4710_FILL_TLB(addr) (*(volatile unsigned long *)(addr))
--#define BCM4710_PROTECTED_FILL_TLB(addr) ({ unsigned long x; get_dbe(x, (volatile unsigned long *)(addr)); })
- #else
- #define BCM4710_DUMMY_RREG()
- 
---- a/arch/mips/mm/tlbex.c
-+++ b/arch/mips/mm/tlbex.c
-@@ -707,6 +707,9 @@ build_get_pgde32(u32 **p, unsigned int t
- #endif
- 	uasm_i_addu(p, ptr, tmp, ptr);
- #else
-+#ifdef CONFIG_BCM47XX
-+	uasm_i_nop(p);
-+#endif
- 	UASM_i_LA_mostly(p, ptr, pgdc);
- #endif
- 	uasm_i_mfc0(p, tmp, C0_BADVADDR); /* get faulting address */
-@@ -868,12 +871,12 @@ static void __cpuinit build_r4000_tlb_re
- 		/* No need for uasm_i_nop */
- 	}
- 
--#ifdef CONFIG_BCM47XX
--	uasm_i_nop(&p);
--#endif
- #ifdef CONFIG_64BIT
- 	build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */
- #else
-+# ifdef CONFIG_BCM47XX
-+	uasm_i_nop(&p);
-+# endif
- 	build_get_pgde32(&p, K0, K1); /* get pgd in K1 */
- #endif
- 
-@@ -885,6 +888,9 @@ static void __cpuinit build_r4000_tlb_re
- 	build_update_entries(&p, K0, K1);
- 	build_tlb_write_entry(&p, &l, &r, tlb_random);
- 	uasm_l_leave(&l, p);
-+#ifdef CONFIG_BCM47XX
-+	uasm_i_nop(&p);
-+#endif
- 	uasm_i_eret(&p); /* return from trap */
- 
- #ifdef CONFIG_HUGETLB_PAGE
-@@ -1321,12 +1327,12 @@ build_r4000_tlbchange_handler_head(u32 *
- 				   struct uasm_reloc **r, unsigned int pte,
- 				   unsigned int ptr)
- {
--#ifdef CONFIG_BCM47XX
--	uasm_i_nop(p);
--#endif
- #ifdef CONFIG_64BIT
- 	build_get_pmde64(p, l, r, pte, ptr); /* get pmd in ptr */
- #else
-+# ifdef CONFIG_BCM47XX
-+	uasm_i_nop(p);
-+# endif
- 	build_get_pgde32(p, pte, ptr); /* get pgd in ptr */
- #endif
- 
-@@ -1363,6 +1369,9 @@ build_r4000_tlbchange_handler_tail(u32 *
- 	build_update_entries(p, tmp, ptr);
- 	build_tlb_write_entry(p, l, r, tlb_indexed);
- 	uasm_l_leave(l, *p);
-+#ifdef CONFIG_BCM47XX
-+	uasm_i_nop(p);
-+#endif
- 	uasm_i_eret(p); /* return from trap */
- 
- #ifdef CONFIG_64BIT
---- a/arch/mips/kernel/genex.S
-+++ b/arch/mips/kernel/genex.S
-@@ -22,6 +22,19 @@
- #include <asm/page.h>
- #include <asm/thread_info.h>
- 
-+#ifdef CONFIG_BCM47XX
-+# ifdef eret
-+#  undef eret
-+# endif
-+# define eret 					\
-+	.set push;				\
-+	.set noreorder;				\
-+	 nop; 					\
-+	 nop;					\
-+	 eret;					\
-+	.set pop;
-+#endif
-+
- #define PANIC_PIC(msg)					\
- 		.set push;				\
- 		.set	reorder;			\
-@@ -54,7 +67,6 @@ NESTED(except_vec3_generic, 0, sp)
- 	.set	noat
- #ifdef CONFIG_BCM47XX
- 	nop
--	nop
- #endif
- #if R5432_CP0_INTERRUPT_WAR
- 	mfc0	k0, CP0_INDEX
-@@ -79,6 +91,9 @@ NESTED(except_vec3_r4000, 0, sp)
- 	.set	push
- 	.set	mips3
- 	.set	noat
-+#ifdef CONFIG_BCM47XX
-+	nop
-+#endif
- 	mfc0	k1, CP0_CAUSE
- 	li	k0, 31<<2
- 	andi	k1, k1, 0x7c

target/linux/brcm47xx/patches-2.6.34/940-bcm47xx-yenta.patch

@@ -1,46 +0,0 @@
---- a/drivers/pcmcia/yenta_socket.c
-+++ b/drivers/pcmcia/yenta_socket.c
-@@ -924,6 +924,8 @@ static unsigned int yenta_probe_irq(stru
- 	 * Probe for usable interrupts using the force
- 	 * register to generate bogus card status events.
- 	 */
-+#ifndef CONFIG_BCM47XX
-+	/* WRT54G3G does not like this */
- 	cb_writel(socket, CB_SOCKET_EVENT, -1);
- 	cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK);
- 	reg = exca_readb(socket, I365_CSCINT);
-@@ -939,6 +941,7 @@ static unsigned int yenta_probe_irq(stru
- 	}
- 	cb_writel(socket, CB_SOCKET_MASK, 0);
- 	exca_writeb(socket, I365_CSCINT, reg);
-+#endif
- 
- 	mask = probe_irq_mask(val) & 0xffff;
- 
-@@ -1023,6 +1026,10 @@ static void yenta_get_socket_capabilitie
- 	else
- 		socket->socket.irq_mask = 0;
- 
-+	/* irq mask probing is broken for the WRT54G3G */
-+	if (socket->socket.irq_mask == 0)
-+		socket->socket.irq_mask = 0x6f8;
-+
- 	dev_printk(KERN_INFO, &socket->dev->dev,
- 		   "ISA IRQ mask 0x%04x, PCI irq %d\n",
- 		   socket->socket.irq_mask, socket->cb_irq);
-@@ -1261,6 +1268,15 @@ static int __devinit yenta_probe(struct
- 	dev_printk(KERN_INFO, &dev->dev,
- 		   "Socket status: %08x\n", cb_readl(socket, CB_SOCKET_STATE));
- 
-+	/* Generate an interrupt on card insert/remove */
-+	config_writew(socket, CB_SOCKET_MASK, CB_CSTSMASK | CB_CDMASK);
-+
-+	/* Set up Multifunction Routing Status Register */
-+	config_writew(socket, 0x8C, 0x1000 /* MFUNC3 to GPIO3 */ | 0x2 /* MFUNC0 to INTA */);
-+
-+	/* Switch interrupts to parallelized */
-+	config_writeb(socket, 0x92, 0x64);
-+
- 	yenta_fixup_parent_bridge(dev->subordinate);
- 
- 	/* Register it with the pcmcia layer.. */

target/linux/brcm47xx/patches-2.6.34/951-brcm4716-defines.patch

@@ -1,104 +0,0 @@
---- a/drivers/ssb/scan.c
-+++ b/drivers/ssb/scan.c
-@@ -92,6 +92,14 @@ const char *ssb_core_name(u16 coreid)
- 		return "ARM 1176";
- 	case SSB_DEV_ARM_7TDMI:
- 		return "ARM 7TDMI";
-+	case SSB_DEV_ETHERNET_GBIT2:
-+		return "Gigabit MAC";
-+	case SSB_DEV_MIPS_74K:
-+		return "MIPS 74k";
-+	case SSB_DEV_DDR_CTRLR:
-+		return "DDR1/2 memory controller";
-+	case SSB_DEV_I2S:
-+		return "I2S";
- 	}
- 	return "UNKNOWN";
- }
-@@ -150,6 +158,7 @@ static u8 chipid_to_nrcores(u16 chipid)
- 	case 0x4710:
- 	case 0x4610:
- 	case 0x4704:
-+	case 0x4716:
- 		return 9;
- 	default:
- 		ssb_printk(KERN_ERR PFX
---- a/include/linux/ssb/ssb.h
-+++ b/include/linux/ssb/ssb.h
-@@ -155,9 +155,16 @@ struct ssb_bus_ops {
- #define SSB_DEV_MINI_MACPHY	0x823
- #define SSB_DEV_ARM_1176	0x824
- #define SSB_DEV_ARM_7TDMI	0x825
-+#define SSB_DEV_ETHERNET_GBIT2	0x82d
-+#define SSB_DEV_MIPS_74K	0x82c
-+#define SSB_DEV_DDR_CTRLR	0x82e
-+#define SSB_DEV_I2S			0x834
-+#define SSB_DEV_DEFAULT		0xfff
- 
- /* Vendor-ID values */
- #define SSB_VENDOR_BROADCOM	0x4243
-+#define SSB_VENDOR_BROADCOM2 0x04BF
-+#define SSB_VENDOR_ARM		0x43b
- 
- /* Some kernel subsystems poke with dev->drvdata, so we must use the
-  * following ugly workaround to get from struct device to struct ssb_device */
---- a/include/linux/ssb/ssb_regs.h
-+++ b/include/linux/ssb/ssb_regs.h
-@@ -11,6 +11,7 @@
- #define	SSB_SDRAM_SWAPPED	0x10000000U	/* Byteswapped Physical SDRAM */
- #define SSB_ENUM_BASE    	0x18000000U	/* Enumeration space base */
- #define	SSB_ENUM_LIMIT		0x18010000U	/* Enumeration space limit */
-+#define SSB_AI_BASE		0x18100000		/* base for AI registers */
- 
- #define	SSB_FLASH2		0x1c000000U	/* Flash Region 2 (region 1 shadowed here) */
- #define	SSB_FLASH2_SZ		0x02000000U	/* Size of Flash Region 2 */
-@@ -26,6 +27,7 @@
- #define	SSB_EUART		(SSB_EXTIF_BASE + 0x00800000)
- #define	SSB_LED			(SSB_EXTIF_BASE + 0x00900000)
- 
-+#define SSB_EROM_ASD_SZ_BASE 0x00001000
- 
- /* Enumeration space constants */
- #define SSB_CORE_SIZE		0x1000	/* Size of a core MMIO area */
-@@ -499,5 +501,41 @@ enum {
- #define SSB_ADM_BASE2			0xFFFF0000	/* Type2 base address for the core */
- #define SSB_ADM_BASE2_SHIFT		16
- 
-+/***** EROM defines for AI type busses *****/
-+#define SSB_EROM_VALID			1
-+#define SSB_EROM_END			0xe
-+#define SSB_EROM_TAG			0xe
-+/* Adress Space Descriptor */
-+#define SSB_EROM_ASD			0x4
-+#define SSB_EROM_ASD_SP_MASK	0x00000f00
-+#define SSB_EROM_ASD_SP_SHIFT	8
-+#define SSB_EROM_ASD_ST_MASK	0x000000c0
-+#define SSB_EROM_ASD_ST_SLAVE	0x00000000
-+#define SSB_EROM_ASD_ST_BRIDGE	0x00000040
-+#define SSB_EROM_ASD_ST_MWRAP	0x000000c0
-+#define SSB_EROM_ASD_ST_SWRAP	0x00000080
-+#define SSB_EROM_ASD_ADDR_MASK	0xfffff000
-+#define SSB_EROM_ASD_AG32		0x00000008
-+#define SSB_EROM_ASD_SZ_MASK	0x00000030
-+#define SSB_EROM_ASD_SZ_SZD		0x00000030
-+#define SSB_EROM_ASD_SZ_SHIFT	4
-+#define SSB_EROM_CI				0
-+#define SSB_EROM_CIA_CID_MASK	0x000fff00
-+#define SSB_EROM_CIA_CID_SHIFT	8
-+#define SSB_EROM_CIA_MFG_MASK	0xfff00000
-+#define SSB_EROM_CIA_MFG_SHIFT	20
-+#define SSB_EROM_CIB_REV_MASK	0xff000000
-+#define SSB_EROM_CIB_REV_SHIFT	24
-+#define SSB_EROM_CIB_NMW_MASK	0x0007c000
-+#define SSB_EROM_CIB_NSW_MASK	0x00f80000
-+#define SSB_EROM_CIB_NSP_MASK	0x00003e00
-+
-+/***** Registers of AI config space *****/
-+#define SSB_AI_RESETCTRL		0x800 /* maybe 0x804 for big endian */
-+#define  SSB_AI_RESETCTRL_RESET	1
-+#define SSB_AI_IOCTRL			0x408 /* maybe 0x40c for big endian */
-+#define SSB_CF_FGC				0x0002
-+#define SSB_CF_CLOCK_EN			0x001
-+#define SSB_AI_oobselouta30		0x100
- 
- #endif /* LINUX_SSB_REGS_H_ */

target/linux/brcm47xx/patches-2.6.34/976-ssb_increase_pci_delay.patch

@@ -1,11 +0,0 @@
---- a/drivers/ssb/driver_pcicore.c
-+++ b/drivers/ssb/driver_pcicore.c
-@@ -370,7 +370,7 @@ static void ssb_pcicore_init_hostmode(st
- 	set_io_port_base(ssb_pcicore_controller.io_map_base);
- 	/* Give some time to the PCI controller to configure itself with the new
- 	 * values. Not waiting at this point causes crashes of the machine. */
--	mdelay(10);
-+	mdelay(300);
- 	register_pci_controller(&ssb_pcicore_controller);
- }
- 

target/linux/brcm47xx/patches-2.6.34/977-ssb_export_fallback_sprom.patch

@@ -1,20 +0,0 @@
---- a/drivers/ssb/sprom.c
-+++ b/drivers/ssb/sprom.c
-@@ -176,6 +176,7 @@ const struct ssb_sprom *ssb_get_fallback
- {
- 	return fallback_sprom;
- }
-+EXPORT_SYMBOL(ssb_get_fallback_sprom);
- 
- /* http://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */
- bool ssb_is_sprom_available(struct ssb_bus *bus)
---- a/include/linux/ssb/ssb.h
-+++ b/include/linux/ssb/ssb.h
-@@ -412,6 +412,7 @@ extern bool ssb_is_sprom_available(struc
- /* Set a fallback SPROM.
-  * See kdoc at the function definition for complete documentation. */
- extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom);
-+extern const struct ssb_sprom *ssb_get_fallback_sprom(void);
- 
- /* Suspend a SSB bus.
-  * Call this from the parent bus suspend routine. */

target/linux/brcm47xx/patches-2.6.34/999-wl_exports.patch

@@ -1,22 +0,0 @@
---- a/arch/mips/bcm47xx/nvram.c
-+++ b/arch/mips/bcm47xx/nvram.c
-@@ -20,7 +20,8 @@
- #include <asm/mach-bcm47xx/nvram.h>
- #include <asm/mach-bcm47xx/bcm47xx.h>
- 
--static char nvram_buf[NVRAM_SPACE];
-+char nvram_buf[NVRAM_SPACE];
-+EXPORT_SYMBOL(nvram_buf);
- static int cfe_env;
- extern char *cfe_env_get(char *nv_buf, const char *name);
- 
---- a/arch/mips/mm/cache.c
-+++ b/arch/mips/mm/cache.c
-@@ -52,6 +52,7 @@ void (*_dma_cache_wback)(unsigned long s
- void (*_dma_cache_inv)(unsigned long start, unsigned long size);
- 
- EXPORT_SYMBOL(_dma_cache_wback_inv);
-+EXPORT_SYMBOL(_dma_cache_inv);
- 
- #endif /* CONFIG_DMA_NONCOHERENT */
- 

target/linux/generic/config-2.6.34

@@ -1,2988 +0,0 @@
-# CONFIG_6PACK is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_9P_FS is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_AB4500_CORE is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_ACENIC is not set
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_ACPI_POWER_METER is not set
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_ADFS_FS is not set
-# CONFIG_ADM6996_PHY is not set
-# CONFIG_ADM8211 is not set
-CONFIG_AEABI=y
-# CONFIG_AFFS_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_AGP is not set
-CONFIG_AIO=y
-# CONFIG_AIRO is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_ALIM7101_WDT is not set
-# CONFIG_ALTERA_PCIE_CHDMA is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ANDROID is not set
-CONFIG_ANON_INODES=y
-# CONFIG_APPLICOM is not set
-# CONFIG_AR8216_PHY is not set
-# CONFIG_AR9170_USB is not set
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P6440 is not set
-# CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCNET is not set
-# CONFIG_ARLAN is not set
-# CONFIG_ARM_UNWIND is not set
-CONFIG_ARPD=y
-# CONFIG_ARTHUR is not set
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_ASUS_OLED is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_AT24 is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_ATA is not set
-# CONFIG_ATALK is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_ATA_ACPI is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_ATA_NONSTANDARD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_ATA_PIIX is not set
-CONFIG_ATA_SFF=y
-# CONFIG_ATA_VERBOSE_ERROR is not set
-# CONFIG_ATH5K is not set
-# CONFIG_ATH9K is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1C is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL2 is not set
-# CONFIG_ATM is not set
-# CONFIG_ATMEL is not set
-# CONFIG_ATM_AMBASSADOR is not set
-# CONFIG_ATM_BR2684 is not set
-CONFIG_ATM_BR2684_IPFILTER=y
-# CONFIG_ATM_CLIP is not set
-CONFIG_ATM_CLIP_NO_ICMP=y
-# CONFIG_ATM_DRIVERS is not set
-# CONFIG_ATM_DUMMY is not set
-# CONFIG_ATM_ENI is not set
-# CONFIG_ATM_FIRESTREAM is not set
-# CONFIG_ATM_FORE200E is not set
-# CONFIG_ATM_FORE200E_MAYBE is not set
-# CONFIG_ATM_HE is not set
-# CONFIG_ATM_HORIZON is not set
-# CONFIG_ATM_IA is not set
-# CONFIG_ATM_IDT77252 is not set
-# CONFIG_ATM_LANAI is not set
-# CONFIG_ATM_LANE is not set
-# CONFIG_ATM_MPOA is not set
-# CONFIG_ATM_NICSTAR is not set
-# CONFIG_ATM_SOLOS is not set
-# CONFIG_ATM_TCP is not set
-# CONFIG_ATM_ZATM is not set
-# CONFIG_AUDIT is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_AX25 is not set
-# CONFIG_AX25_DAMA_SLAVE is not set
-# CONFIG_AX88796 is not set
-# CONFIG_B3DFG is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_B44 is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-CONFIG_BASE_FULL=y
-CONFIG_BASE_SMALL=0
-# CONFIG_BASLER_EXCITE is not set
-# CONFIG_BATMAN_ADV is not set
-# CONFIG_BATTERY_BQ27000_HDQ is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_MAX17040 is not set
-# CONFIG_BAYCOM_EPP is not set
-# CONFIG_BAYCOM_PAR is not set
-# CONFIG_BAYCOM_SER_FDX is not set
-# CONFIG_BAYCOM_SER_HDX is not set
-# CONFIG_BCM43XX is not set
-CONFIG_BCM43XX_DEBUG=y
-CONFIG_BCM43XX_DMA=y
-CONFIG_BCM43XX_DMA_AND_PIO_MODE=y
-# CONFIG_BCM43XX_DMA_MODE is not set
-CONFIG_BCM43XX_PIO=y
-# CONFIG_BCM43XX_PIO_MODE is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_BINARY_PRINTF is not set
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_BLINK is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_CPQ_DA is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_BLK_DEV_4DRIVES is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI14XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_ATIIXP is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_CMD640 is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_CS5535 is not set
-# CONFIG_BLK_DEV_CS5536 is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_DELKIN is not set
-# CONFIG_BLK_DEV_DTC2278 is not set
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_HD is not set
-# CONFIG_BLK_DEV_HD_IDE is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_HT6560B is not set
-# CONFIG_BLK_DEV_IDEACPI is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDEPCI is not set
-# CONFIG_BLK_DEV_IDEPNP is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_BLK_DEV_IT8172 is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_QD65XX is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_RZ1000 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SIS5513 is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_UMC8672 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_XIP is not set
-CONFIG_BLOCK=y
-# CONFIG_BNX2 is not set
-# CONFIG_BONDING is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_BPQETHER is not set
-CONFIG_BRIDGE=y
-# CONFIG_BRIDGE_EBT_802_3 is not set
-# CONFIG_BRIDGE_EBT_AMONG is not set
-# CONFIG_BRIDGE_EBT_ARP is not set
-# CONFIG_BRIDGE_EBT_ARPREPLY is not set
-# CONFIG_BRIDGE_EBT_BROUTE is not set
-# CONFIG_BRIDGE_EBT_DNAT is not set
-# CONFIG_BRIDGE_EBT_IP is not set
-# CONFIG_BRIDGE_EBT_IP6 is not set
-# CONFIG_BRIDGE_EBT_LIMIT is not set
-# CONFIG_BRIDGE_EBT_LOG is not set
-# CONFIG_BRIDGE_EBT_MARK is not set
-# CONFIG_BRIDGE_EBT_MARK_T is not set
-# CONFIG_BRIDGE_EBT_NFLOG is not set
-# CONFIG_BRIDGE_EBT_PKTTYPE is not set
-# CONFIG_BRIDGE_EBT_REDIRECT is not set
-# CONFIG_BRIDGE_EBT_SNAT is not set
-# CONFIG_BRIDGE_EBT_STP is not set
-# CONFIG_BRIDGE_EBT_T_FILTER is not set
-# CONFIG_BRIDGE_EBT_T_NAT is not set
-# CONFIG_BRIDGE_EBT_ULOG is not set
-# CONFIG_BRIDGE_EBT_VLAN is not set
-CONFIG_BRIDGE_IGMP_SNOOPING=y
-# CONFIG_BRIDGE_NETFILTER is not set
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-# CONFIG_BROADCOM_PHY is not set
-CONFIG_BROKEN_ON_SMP=y
-# CONFIG_BSD_DISKLABEL is not set
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_BT is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_BT_ATH3K is not set
-# CONFIG_BT_BNEP is not set
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-# CONFIG_BT_CMTP is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIBTUART is not set
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIDTL1 is not set
-# CONFIG_BT_HCIUART is not set
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_H4=y
-# CONFIG_BT_HCIUART_LL is not set
-# CONFIG_BT_HCIUSB is not set
-CONFIG_BT_HCIUSB_SCO=y
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_BT_HIDP is not set
-# CONFIG_BT_L2CAP is not set
-# CONFIG_BT_MRVL is not set
-# CONFIG_BT_RFCOMM is not set
-CONFIG_BT_RFCOMM_TTY=y
-# CONFIG_BT_SCO is not set
-CONFIG_BUG=y
-# CONFIG_C2PORT is not set
-# CONFIG_CAN is not set
-# CONFIG_CAPI_AVM is not set
-# CONFIG_CAPI_EICON is not set
-# CONFIG_CAPI_TRACE is not set
-CONFIG_CARDBUS=y
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_CASSINI is not set
-# CONFIG_CB710_CORE is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CFG80211 is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-CONFIG_CIFS_POSIX=y
-CONFIG_CIFS_STATS=y
-# CONFIG_CIFS_STATS2 is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-CONFIG_CLS_U32_MARK=y
-CONFIG_CLS_U32_PERF=y
-CONFIG_CMDLINE=""
-# CONFIG_CMDLINE_BOOL is not set
-# CONFIG_CNIC is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_COMEDI is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_CONFIGFS_FS is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_CONSTRUCTORS=y
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-# CONFIG_CRAMFS is not set
-CONFIG_CRASHLOG=y
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC_ITU_T is not set
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CROSSCOMPILE=y
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_AEAD is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_AES_586 is not set
-# CONFIG_CRYPTO_ALGAPI is not set
-# CONFIG_CRYPTO_ALGAPI2 is not set
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_BLKCIPHER is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CRC32C_INTEL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_IFXMIPS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
-# CONFIG_CRYPTO_HASH is not set
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_HW is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_LZO is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-CONFIG_CRYPTO_MANAGER_NO_TESTS=y
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_PCOMP is not set
-# CONFIG_CRYPTO_PCOMP2 is not set
-# CONFIG_CRYPTO_PRNG is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_RNG is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SALSA20_586 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SEQIV is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_TWOFISH_586 is not set
-# CONFIG_CRYPTO_TWOFISH_COMMON is not set
-# CONFIG_CRYPTO_VMAC is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYSTALHD is not set
-# CONFIG_CS5535_MFGPT is not set
-# CONFIG_CUSE is not set
-# CONFIG_DAB is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_DCB is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RODATA is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DECNET is not set
-CONFIG_DECOMPRESS_LZMA_NEEDED=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_BIC is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_CUBIC is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_HTCP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_DEFAULT_NOOP is not set
-# CONFIG_DEFAULT_RENO is not set
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_DEFAULT_SECURITY_DAC=y
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_TCP_CONG="westwood"
-# CONFIG_DEFAULT_VEGAS is not set
-CONFIG_DEFAULT_WESTWOOD=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-# CONFIG_DETECT_HUNG_TASK is not set
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DEVKMEM is not set
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-# CONFIG_DEVTMPFS is not set
-# CONFIG_DEVTMPFS_MOUNT is not set
-# CONFIG_DGRS is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_DL2K is not set
-# CONFIG_DLM is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_DMASCC is not set
-# CONFIG_DMATEST is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_DMA_ENGINE is not set
-# CONFIG_DM_LOG_USERSPACE is not set
-# CONFIG_DNET is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_DRAGONRISE_FF is not set
-# CONFIG_DRM is not set
-# CONFIG_DS1682 is not set
-# CONFIG_DST is not set
-# CONFIG_DT3155 is not set
-# CONFIG_DTLK is not set
-# CONFIG_DUMMY is not set
-# CONFIG_DVB is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_E100 is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_ECHO is not set
-# CONFIG_ECONET is not set
-# CONFIG_EDAC is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_ELF_CORE is not set
-CONFIG_EMBEDDED=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-# CONFIG_ENC28J60 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_EPIC100 is not set
-CONFIG_EPOLL=y
-# CONFIG_EQUALIZER is not set
-# CONFIG_ET131X is not set
-# CONFIG_ETHOC is not set
-CONFIG_EVENTFD=y
-# CONFIG_EVENT_TRACER is not set
-CONFIG_EXPERIMENTAL=y
-# CONFIG_EXPORTFS is not set
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_EXT4_DEBUG is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_EXT4_FS_SECURITY is not set
-# CONFIG_EXT4_FS_XATTR is not set
-CONFIG_EXT4_USE_FOR_EXT23=y
-CONFIG_EXTRA_FIRMWARE=""
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_EZX_PCAP is not set
-# CONFIG_FAIR_GROUP_SCHED is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_FAT_FS is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_FB is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_ARC is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_FB_CARMINE is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_EARLYSUSPEND is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_GEODE is not set
-# CONFIG_FB_GOLDFISH is not set
-# CONFIG_FB_HGA is not set
-# CONFIG_FB_IBM_GXT4500 is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_LE80578 is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_N411 is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_OF is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_PS3 is not set
-# CONFIG_FB_PXA is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_UDL is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FCOE is not set
-# CONFIG_FCOE_FNIC is not set
-# CONFIG_FDDI is not set
-# CONFIG_FEALNX is not set
-CONFIG_FIB_RULES=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_FIREWIRE is not set
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-# CONFIG_FIXED_PHY is not set
-CONFIG_FLATMEM=y
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_FORCEDETH is not set
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_FREEZER is not set
-# CONFIG_FSCACHE is not set
-CONFIG_FSNOTIFY=y
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_FTL is not set
-# CONFIG_FTRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_FUSE_FS is not set
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-# CONFIG_FUSION_SPI is not set
-CONFIG_FUTEX=y
-CONFIG_FW_LOADER=y
-CONFIG_GACT_PROB=y
-# CONFIG_GAMEPORT is not set
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_IRQ_PROBE=y
-# CONFIG_GENERIC_PWM is not set
-CONFIG_GENERIC_TIME=y
-# CONFIG_GFS2_FS is not set
-# CONFIG_GIGASET_CAPI is not set
-# CONFIG_GIGASET_DEBUG is not set
-# CONFIG_GPIOLIB is not set
-# CONFIG_GPIO_ADP5588 is not set
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_CS5535 is not set
-# CONFIG_GPIO_DEVICE is not set
-# CONFIG_GPIO_IT8761E is not set
-# CONFIG_GPIO_LANGWELL is not set
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_MC33880 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_SCH is not set
-# CONFIG_GPIO_SYSFS is not set
-# CONFIG_GPIO_XILINX is not set
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_HAMACHI is not set
-CONFIG_HAMRADIO=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_HAVE_AOUT is not set
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_HCALL_STATS is not set
-# CONFIG_HDLC is not set
-# CONFIG_HDLC_CISCO is not set
-# CONFIG_HDLC_FR is not set
-# CONFIG_HDLC_PPP is not set
-# CONFIG_HDLC_RAW is not set
-# CONFIG_HDLC_RAW_ETH is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_HECI is not set
-# CONFIG_HERMES is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HID is not set
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_3M_PCT is not set
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_BRIGHT is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_COMPAT is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HID_DELL is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_FF is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MAGICMOUSE is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_MOSART is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_PID is not set
-# CONFIG_HID_QUANTA is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_STANTUM is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_WACOM is not set
-# CONFIG_HID_ZEROPLUS is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_HIGH_RES_TIMERS=y
-# CONFIG_HIPPI is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_HOSTAP_CS is not set
-# CONFIG_HOSTAP_PCI is not set
-# CONFIG_HOSTAP_PLX is not set
-CONFIG_HOTPLUG=y
-# CONFIG_HOTPLUG_CPU is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HP100 is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_HVC_UDBG is not set
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-# CONFIG_HW_RANDOM_AMD is not set
-# CONFIG_HW_RANDOM_GEODE is not set
-# CONFIG_HW_RANDOM_INTEL is not set
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_HW_RANDOM_VIA is not set
-# CONFIG_HYPERV is not set
-# CONFIG_HYSDN is not set
-CONFIG_HZ=100
-CONFIG_HZ_100=y
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_48 is not set
-# CONFIG_I2C is not set
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCA is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_CHARDEV is not set
-# CONFIG_I2C_COMPAT is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_ELEKTOR is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_HELPER_AUTO is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_IBM_IIC is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_MPC is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_SMBUS is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_XILINX is not set
-# CONFIG_I2O is not set
-# CONFIG_I82092 is not set
-# CONFIG_I82365 is not set
-# CONFIG_IBM_ASM is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_IDE is not set
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_IDEPCI_SHARE_IRQ is not set
-# CONFIG_IDE_GD is not set
-CONFIG_IDE_MAX_HWIFS=4
-# CONFIG_IDE_PHISON is not set
-CONFIG_IDE_PROC_FS=y
-# CONFIG_IDE_TASK_IOCTL is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_IEEE1394_DV1394 is not set
-# CONFIG_IEEE1394_ETH1394 is not set
-# CONFIG_IEEE1394_OHCI1394 is not set
-# CONFIG_IEEE1394_PCILYNX is not set
-# CONFIG_IEEE1394_RAWIO is not set
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
-# CONFIG_IEEE1394_VIDEO1394 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_IEEE80211_CRYPT_CCMP is not set
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-# CONFIG_IEEE80211_CRYPT_WEP is not set
-# CONFIG_IEEE80211_DEBUG is not set
-# CONFIG_IEEE80211_SOFTMAC is not set
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_IFB is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_IIO is not set
-# CONFIG_IKCONFIG is not set
-# CONFIG_IKCONFIG_PROC is not set
-# CONFIG_IMAGE_CMDLINE_HACK is not set
-CONFIG_INET=y
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_TCP_DIAG is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_INFTL is not set
-# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
-# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set
-# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
-CONFIG_INITRAMFS_COMPRESSION_NONE=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-# CONFIG_INPUT is not set
-# CONFIG_INPUT_APANEL is not set
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_ATLAS_BTNS is not set
-# CONFIG_INPUT_CM109 is not set
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_GPIO is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_MIMIO is not set
-CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_PCSPKR is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_WINBOND_CIR is not set
-# CONFIG_INPUT_WISTRON_BTNS is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INSTRUMENTATION is not set
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IP1000 is not set
-# CONFIG_IP17XX_PHY is not set
-# CONFIG_IP6_NF_FILTER is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-# CONFIG_IP6_NF_MANGLE is not set
-# CONFIG_IP6_NF_MATCH_AH is not set
-# CONFIG_IP6_NF_MATCH_EUI64 is not set
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-# CONFIG_IP6_NF_MATCH_LIMIT is not set
-# CONFIG_IP6_NF_MATCH_MH is not set
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_OWNER is not set
-# CONFIG_IP6_NF_MATCH_RT is not set
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_RAW is not set
-# CONFIG_IP6_NF_TARGET_HL is not set
-# CONFIG_IP6_NF_TARGET_IMQ is not set
-# CONFIG_IP6_NF_TARGET_LOG is not set
-# CONFIG_IP6_NF_TARGET_REJECT is not set
-# CONFIG_IP6_NF_TARGET_ROUTE is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_IPSEC_NAT_TRAVERSAL=y
-# CONFIG_IPV6 is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_ROUTE_INFO is not set
-# CONFIG_IPV6_SIT is not set
-# CONFIG_IPV6_SIT_6RD is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2100_DEBUG is not set
-CONFIG_IPW2100_MONITOR=y
-# CONFIG_IPW2200 is not set
-# CONFIG_IPW2200_DEBUG is not set
-CONFIG_IPW2200_MONITOR=y
-# CONFIG_IPW2200_PROMISCUOUS is not set
-# CONFIG_IPW2200_QOS is not set
-# CONFIG_IPW2200_RADIOTAP is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_IPX is not set
-CONFIG_IP_ADVANCED_ROUTER=y
-# CONFIG_IP_DCCP is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_MROUTE=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_MULTIPLE_TABLES=y
-# CONFIG_IP_NF_AMANDA is not set
-# CONFIG_IP_NF_ARPFILTER is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_NF_ARP_MANGLE is not set
-# CONFIG_IP_NF_CONNTRACK is not set
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-# CONFIG_IP_NF_FILTER is not set
-# CONFIG_IP_NF_FTP is not set
-# CONFIG_IP_NF_H323 is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_IRC is not set
-# CONFIG_IP_NF_MANGLE is not set
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_AH is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
-# CONFIG_IP_NF_MATCH_IPP2P is not set
-# CONFIG_IP_NF_MATCH_OWNER is not set
-# CONFIG_IP_NF_MATCH_RECENT is not set
-# CONFIG_IP_NF_MATCH_SET is not set
-# CONFIG_IP_NF_MATCH_TIME is not set
-# CONFIG_IP_NF_MATCH_TOS is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
-# CONFIG_IP_NF_NAT is not set
-# CONFIG_IP_NF_NAT_AMANDA is not set
-# CONFIG_IP_NF_NAT_FTP is not set
-# CONFIG_IP_NF_NAT_H323 is not set
-# CONFIG_IP_NF_NAT_IRC is not set
-# CONFIG_IP_NF_NAT_NEEDED is not set
-# CONFIG_IP_NF_NAT_PPTP is not set
-# CONFIG_IP_NF_NAT_SIP is not set
-# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
-# CONFIG_IP_NF_NAT_TFTP is not set
-# CONFIG_IP_NF_NETBIOS_NS is not set
-# CONFIG_IP_NF_PPTP is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_SECURITY is not set
-# CONFIG_IP_NF_SET is not set
-# CONFIG_IP_NF_SET_HASHSIZE is not set
-# CONFIG_IP_NF_SET_IPHASH is not set
-# CONFIG_IP_NF_SET_IPMAP is not set
-# CONFIG_IP_NF_SET_IPPORTHASH is not set
-# CONFIG_IP_NF_SET_IPTREE is not set
-# CONFIG_IP_NF_SET_IPTREEMAP is not set
-# CONFIG_IP_NF_SET_MACIPMAP is not set
-# CONFIG_IP_NF_SET_MAX is not set
-# CONFIG_IP_NF_SET_NETHASH is not set
-# CONFIG_IP_NF_SET_PORTMAP is not set
-# CONFIG_IP_NF_SIP is not set
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_IMQ is not set
-# CONFIG_IP_NF_TARGET_LOG is not set
-# CONFIG_IP_NF_TARGET_MASQUERADE is not set
-# CONFIG_IP_NF_TARGET_NETMAP is not set
-# CONFIG_IP_NF_TARGET_REDIRECT is not set
-# CONFIG_IP_NF_TARGET_REJECT is not set
-# CONFIG_IP_NF_TARGET_ROUTE is not set
-# CONFIG_IP_NF_TARGET_SAME is not set
-# CONFIG_IP_NF_TARGET_SET is not set
-# CONFIG_IP_NF_TARGET_TOS is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
-# CONFIG_IP_NF_TARGET_ULOG is not set
-# CONFIG_IP_NF_TFTP is not set
-# CONFIG_IP_PIMSM_V1 is not set
-# CONFIG_IP_PIMSM_V2 is not set
-# CONFIG_IP_PNP is not set
-CONFIG_IP_ROUTE_FWMARK=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_MULTIPATH_CACHED=y
-# CONFIG_IP_ROUTE_MULTIPATH_DRR is not set
-# CONFIG_IP_ROUTE_MULTIPATH_RANDOM is not set
-# CONFIG_IP_ROUTE_MULTIPATH_RR is not set
-# CONFIG_IP_ROUTE_MULTIPATH_WRANDOM is not set
-CONFIG_IP_ROUTE_VERBOSE=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_IP_VS is not set
-# CONFIG_IRDA is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_ISCSI_TCP is not set
-CONFIG_ISDN=y
-# CONFIG_ISDN_AUDIO is not set
-# CONFIG_ISDN_CAPI is not set
-# CONFIG_ISDN_CAPI_CAPIDRV is not set
-# CONFIG_ISDN_DIVERSION is not set
-# CONFIG_ISDN_DRV_ACT2000 is not set
-# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set
-# CONFIG_ISDN_DRV_EICON is not set
-# CONFIG_ISDN_DRV_GIGASET is not set
-# CONFIG_ISDN_DRV_HISAX is not set
-# CONFIG_ISDN_DRV_ICN is not set
-# CONFIG_ISDN_DRV_LOOP is not set
-# CONFIG_ISDN_DRV_PCBIT is not set
-# CONFIG_ISDN_DRV_SC is not set
-# CONFIG_ISDN_DRV_TPAM is not set
-# CONFIG_ISDN_I4L is not set
-# CONFIG_ISDN_WITH_ABC is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_ISO9660_FS is not set
-# CONFIG_IWL3945 is not set
-# CONFIG_IWLAGN is not set
-# CONFIG_IWLCORE is not set
-# CONFIG_IWLWIFI is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_IWMC3200TOP is not set
-# CONFIG_IXGB is not set
-# CONFIG_JBD is not set
-# CONFIG_JBD2_DEBUG is not set
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_XATTR is not set
-CONFIG_JFFS2_LZMA=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_ZLIB is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_STATISTICS is not set
-# CONFIG_JME is not set
-CONFIG_JOLIET=y
-# CONFIG_KALLSYMS is not set
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_GZIP is not set
-CONFIG_KERNEL_LZMA=y
-# CONFIG_KERNEL_LZO is not set
-# CONFIG_KEXEC is not set
-# CONFIG_KEYBOARD_ADP5588 is not set
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_MCS is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYS is not set
-# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
-# CONFIG_KMEMTRACE is not set
-CONFIG_KMOD=y
-# CONFIG_KPROBES is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_KSM is not set
-# CONFIG_KSZ884X_PCI is not set
-# CONFIG_LANMEDIA is not set
-# CONFIG_LAPB is not set
-# CONFIG_LASAT is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_LBDAF=y
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_LEDS_ALIX is not set
-# CONFIG_LEDS_BD2802 is not set
-CONFIG_LEDS_CLASS=y
-# CONFIG_LEDS_DAC124S085 is not set
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_INTEL_SS4200 is not set
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_LP5521 is not set
-# CONFIG_LEDS_LT3593 is not set
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_PCA955X is not set
-CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
-# CONFIG_LEDS_TRIGGER_MORSE is not set
-CONFIG_LEDS_TRIGGER_NETDEV=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_LIB80211_CRYPT_CCMP is not set
-# CONFIG_LIB80211_CRYPT_TKIP is not set
-# CONFIG_LIB80211_CRYPT_WEP is not set
-# CONFIG_LIB80211_DEBUG is not set
-# CONFIG_LIBCRC32C is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_LIBERTAS_USB is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_LIBIPW_DEBUG is not set
-# CONFIG_LINE6_USB is not set
-# CONFIG_LKDTM is not set
-CONFIG_LLC=y
-# CONFIG_LLC2 is not set
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_LOCKD is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_LOCKD_V4=y
-# CONFIG_LOCK_STAT is not set
-# CONFIG_LOGFS is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGO is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_LPC_SCH is not set
-# CONFIG_LSF is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_LTPC is not set
-# CONFIG_LXT_PHY is not set
-CONFIG_LZMA_COMPRESS=y
-CONFIG_LZMA_DECOMPRESS=y
-# CONFIG_MAC80211 is not set
-CONFIG_MAC80211_DEFAULT_PS=y
-CONFIG_MAC80211_DEFAULT_PS_VALUE=1
-# CONFIG_MACINTOSH_DRIVERS is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_MACVTAP is not set
-# CONFIG_MAC_EMUMOUSEBTN is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_MARKEINS is not set
-# CONFIG_MARKERS is not set
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_MAX63XX_WATCHDOG is not set
-# CONFIG_MD is not set
-# CONFIG_MDIO_BITBANG is not set
-# CONFIG_ME4000 is not set
-# CONFIG_MEDIA_ATTACH is not set
-# CONFIG_MEDIA_SUPPORT is not set
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_MEILHAUS is not set
-# CONFIG_MEMORY_FAILURE is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_MFD_88PM8607 is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_MFD_TIMBERDALE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MG_DISK is not set
-# CONFIG_MICREL_PHY is not set
-# CONFIG_MIGRATION is not set
-CONFIG_MII=y
-# CONFIG_MINIX_FS is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-CONFIG_MINI_FO=y
-# CONFIG_MIPS_FPU_EMU is not set
-CONFIG_MISC_DEVICES=y
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_MISDN is not set
-# CONFIG_MISDN_AVMFRITZ is not set
-# CONFIG_MISDN_HFCPCI is not set
-# CONFIG_MISDN_HFCUSB is not set
-# CONFIG_MISDN_INFINEON is not set
-# CONFIG_MISDN_NETJET is not set
-# CONFIG_MISDN_SPEEDFAX is not set
-# CONFIG_MISDN_W6692 is not set
-# CONFIG_MKISS is not set
-# CONFIG_MMC is not set
-# CONFIG_MMC_ARMMMCI is not set
-# CONFIG_MMC_BLOCK is not set
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_MMC_CB710 is not set
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_MVSDIO is not set
-# CONFIG_MMC_S3C is not set
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_SDRICOH_CS is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MMC_TEST is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-# CONFIG_MMC_VIA_SDMMC is not set
-CONFIG_MMU=y
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_MSDOS_FS is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_MTD=y
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_AR7_PARTS is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_MTD_BLOCK2MTD is not set
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_CHAR=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_GPIO_ADDR is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_JEDECPROBE is not set
-# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_M25P80 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_MYLOADER_PARTS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_ONENAND is not set
-# CONFIG_MTD_OOPS is not set
-# CONFIG_MTD_OTP is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PLATRAM is not set
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_RAM is not set
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_ROM is not set
-CONFIG_MTD_ROOTFS_ROOT_DEV=y
-CONFIG_MTD_ROOTFS_SPLIT=y
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_UBI is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_MVSWITCH_PHY is not set
-# CONFIG_MWAVE is not set
-# CONFIG_MWL8K is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_NEC_MARKEINS is not set
-CONFIG_NET=y
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETDEBUG is not set
-CONFIG_NETDEVICES=y
-CONFIG_NETDEVICES_MULTIQUEUE=y
-CONFIG_NETDEV_1000=y
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_NETFILTER_ADVANCED is not set
-# CONFIG_NETFILTER_DEBUG is not set
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_TPROXY is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
-# CONFIG_NETFILTER_XT_MATCH_HL is not set
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
-# CONFIG_NETFILTER_XT_MATCH_LAYER7 is not set
-# CONFIG_NETFILTER_XT_MATCH_LAYER7_DEBUG is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_OSF is not set
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
-# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
-# CONFIG_NETFILTER_XT_MATCH_STATE is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_CT is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_HL is not set
-# CONFIG_NETFILTER_XT_TARGET_IMQ is not set
-# CONFIG_NETFILTER_XT_TARGET_LED is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-# CONFIG_NETFILTER_XT_TARGET_TPROXY is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NETROM is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NET_9P is not set
-# CONFIG_NET_ACT_GACT is not set
-# CONFIG_NET_ACT_IPT is not set
-# CONFIG_NET_ACT_MIRRED is not set
-# CONFIG_NET_ACT_NAT is not set
-# CONFIG_NET_ACT_PEDIT is not set
-# CONFIG_NET_ACT_POLICE is not set
-# CONFIG_NET_ACT_SIMP is not set
-# CONFIG_NET_ACT_SKBEDIT is not set
-CONFIG_NET_CLS=y
-# CONFIG_NET_CLS_ACT is not set
-# CONFIG_NET_CLS_BASIC is not set
-# CONFIG_NET_CLS_FLOW is not set
-# CONFIG_NET_CLS_FW is not set
-CONFIG_NET_CLS_IND=y
-# CONFIG_NET_CLS_ROUTE4 is not set
-# CONFIG_NET_CLS_RSVP is not set
-# CONFIG_NET_CLS_RSVP6 is not set
-# CONFIG_NET_CLS_TCINDEX is not set
-# CONFIG_NET_CLS_U32 is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_EMATCH_CMP is not set
-# CONFIG_NET_EMATCH_META is not set
-# CONFIG_NET_EMATCH_NBYTE is not set
-CONFIG_NET_EMATCH_STACK=32
-# CONFIG_NET_EMATCH_TEXT is not set
-# CONFIG_NET_EMATCH_U32 is not set
-CONFIG_NET_ESTIMATOR=y
-CONFIG_NET_ETHERNET=y
-# CONFIG_NET_FC is not set
-# CONFIG_NET_IPGRE is not set
-CONFIG_NET_IPGRE_BROADCAST=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_KEY is not set
-# CONFIG_NET_KEY_MIGRATE is not set
-CONFIG_NET_PCI=y
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-CONFIG_NET_RADIO=y
-# CONFIG_NET_SB1000 is not set
-CONFIG_NET_SCHED=y
-# CONFIG_NET_SCH_ATM is not set
-# CONFIG_NET_SCH_CBQ is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_DRR is not set
-# CONFIG_NET_SCH_DSMARK is not set
-# CONFIG_NET_SCH_ESFQ is not set
-CONFIG_NET_SCH_ESFQ_NFCT=y
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_NET_SCH_GRED is not set
-# CONFIG_NET_SCH_HFSC is not set
-# CONFIG_NET_SCH_HTB is not set
-# CONFIG_NET_SCH_INGRESS is not set
-# CONFIG_NET_SCH_MULTIQ is not set
-# CONFIG_NET_SCH_NETEM is not set
-# CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_RED is not set
-# CONFIG_NET_SCH_RR is not set
-# CONFIG_NET_SCH_SFQ is not set
-# CONFIG_NET_SCH_TBF is not set
-# CONFIG_NET_SCH_TEQL is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_NET_VENDOR_3COM is not set
-CONFIG_NET_WIRELESS=y
-CONFIG_NET_WIRELESS_RTNETLINK=y
-# CONFIG_NEW_GPIO is not set
-CONFIG_NEW_LEDS=y
-# CONFIG_NFSD is not set
-CONFIG_NFSD_TCP=y
-# CONFIG_NFSD_V2_ACL is not set
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-# CONFIG_NFS_ACL_SUPPORT is not set
-CONFIG_NFS_COMMON=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFS_FS is not set
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_V4_1 is not set
-# CONFIG_NFTL is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NF_CONNTRACK_AMANDA is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-# CONFIG_NF_CONNTRACK_EVENTS is not set
-# CONFIG_NF_CONNTRACK_FTP is not set
-# CONFIG_NF_CONNTRACK_H323 is not set
-# CONFIG_NF_CONNTRACK_IPV4 is not set
-# CONFIG_NF_CONNTRACK_IPV6 is not set
-# CONFIG_NF_CONNTRACK_IRC is not set
-# CONFIG_NF_CONNTRACK_MARK is not set
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-# CONFIG_NF_CONNTRACK_PPTP is not set
-# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
-# CONFIG_NF_CONNTRACK_RTSP is not set
-# CONFIG_NF_CONNTRACK_SANE is not set
-# CONFIG_NF_CONNTRACK_SIP is not set
-# CONFIG_NF_CONNTRACK_SUPPORT is not set
-# CONFIG_NF_CONNTRACK_TFTP is not set
-# CONFIG_NF_CT_ACCT is not set
-# CONFIG_NF_CT_NETLINK is not set
-# CONFIG_NF_CT_PROTO_DCCP is not set
-# CONFIG_NF_CT_PROTO_GRE is not set
-# CONFIG_NF_CT_PROTO_SCTP is not set
-# CONFIG_NF_CT_PROTO_UDPLITE is not set
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_NF_NAT is not set
-# CONFIG_NF_NAT_AMANDA is not set
-# CONFIG_NF_NAT_FTP is not set
-# CONFIG_NF_NAT_H323 is not set
-# CONFIG_NF_NAT_IRC is not set
-# CONFIG_NF_NAT_NEEDED is not set
-# CONFIG_NF_NAT_PPTP is not set
-# CONFIG_NF_NAT_PROTO_GRE is not set
-# CONFIG_NF_NAT_RTSP is not set
-# CONFIG_NF_NAT_SIP is not set
-# CONFIG_NF_NAT_SNMP_BASIC is not set
-# CONFIG_NF_NAT_TFTP is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NL80211=y
-CONFIG_NLATTR=y
-# CONFIG_NLS is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_NORTEL_HERMES is not set
-# CONFIG_NOZOMI is not set
-# CONFIG_NO_BOOTMEM is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_NS83820 is not set
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_FS is not set
-# CONFIG_NTFS_RW is not set
-# CONFIG_NVRAM is not set
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_OCF_BENCH is not set
-# CONFIG_OCF_C7108 is not set
-# CONFIG_OCF_CRYPTOCTEON is not set
-# CONFIG_OCF_EP80579 is not set
-# CONFIG_OCF_HIFN is not set
-# CONFIG_OCF_HIFNHIPP is not set
-# CONFIG_OCF_IXP4XX is not set
-# CONFIG_OCF_KIRKWOOD is not set
-# CONFIG_OCF_OCF is not set
-# CONFIG_OCF_OCFNULL is not set
-# CONFIG_OCF_SAFE is not set
-# CONFIG_OCF_TALITOS is not set
-# CONFIG_OC_ETM is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_ORION_WATCHDOG is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_P54_COMMON is not set
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_PAGE_POISONING is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_32KB is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PANTHERLORD_FF is not set
-# CONFIG_PARPORT is not set
-# CONFIG_PARPORT_PC is not set
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CS5535 is not set
-# CONFIG_PATA_CS5536 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_ISAPNP is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PCMCIA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_QDI is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_WINBOND_VLB is not set
-# CONFIG_PC300TOO is not set
-# CONFIG_PCCARD is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_PCI200SYN is not set
-# CONFIG_PCIEAER_INJECT is not set
-# CONFIG_PCIEASPM is not set
-# CONFIG_PCIE_ECRC is not set
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_PCI_ATMEL is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_DISABLE_COMMON_QUIRKS is not set
-# CONFIG_PCI_HERMES is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_MSI is not set
-CONFIG_PCI_QUIRKS=y
-# CONFIG_PCI_STUB is not set
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCMCIA is not set
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_ATMEL is not set
-# CONFIG_PCMCIA_DEBUG is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_HERMES is not set
-# CONFIG_PCMCIA_IOCTL is not set
-# CONFIG_PCMCIA_LOAD_CIS is not set
-# CONFIG_PCMCIA_NETWAVE is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_PCMCIA_SPECTRUM is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-# CONFIG_PCMCIA_WAVELAN is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_PCMCIA_XIRCOM is not set
-# CONFIG_PCNET32 is not set
-# CONFIG_PCSPKR_PLATFORM is not set
-# CONFIG_PD6729 is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_PERF_COUNTERS is not set
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_PHONE is not set
-# CONFIG_PHONET is not set
-# CONFIG_PHYLIB is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-# CONFIG_PID_NS is not set
-# CONFIG_PLAN9AUTH is not set
-CONFIG_PLIST=y
-# CONFIG_PLX_HERMES is not set
-# CONFIG_PM is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_POHMELFS is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_PPC4xx_GPIO=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-# CONFIG_PPC_EMULATED_STATS is not set
-# CONFIG_PPP is not set
-# CONFIG_PPPOATM is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_DEFLATE is not set
-CONFIG_PPP_FILTER=y
-# CONFIG_PPP_MPPE is not set
-CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPS is not set
-# CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_PRINTK=y
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_PRISM2_USB is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_PROBE_INITRD_HEADER is not set
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_PROC_SYSCTL=y
-# CONFIG_PROFILING is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_PSB6970_PHY is not set
-# CONFIG_QEMU is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_QT2160 is not set
-# CONFIG_QUOTA is not set
-# CONFIG_R3964 is not set
-# CONFIG_R6040 is not set
-# CONFIG_R8169 is not set
-# CONFIG_R8187SE is not set
-# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_RADIO_AZTECH is not set
-# CONFIG_RADIO_CADET is not set
-# CONFIG_RADIO_GEMTEK is not set
-# CONFIG_RADIO_GEMTEK_PCI is not set
-# CONFIG_RADIO_MAESTRO is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_RTRACK is not set
-# CONFIG_RADIO_RTRACK2 is not set
-# CONFIG_RADIO_SF16FMI is not set
-# CONFIG_RADIO_SF16FMR2 is not set
-# CONFIG_RADIO_TERRATEC is not set
-# CONFIG_RADIO_TRUST is not set
-# CONFIG_RADIO_TYPHOON is not set
-# CONFIG_RADIO_ZOLTRIX is not set
-# CONFIG_RAID_ATTRS is not set
-CONFIG_RAMFS=y
-# CONFIG_RAMZSWAP is not set
-# CONFIG_RAR_REGISTER is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_RCU_TRACE is not set
-# CONFIG_RDC_17F3101X is not set
-# CONFIG_RDS is not set
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_GZIP is not set
-CONFIG_RD_LZMA=y
-# CONFIG_RD_LZO is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_REDWOOD is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_RELAY is not set
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_RFKILL is not set
-# CONFIG_RFKILL_INPUT is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_ROSE is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_RT2860 is not set
-# CONFIG_RT2870 is not set
-# CONFIG_RT2X00 is not set
-# CONFIG_RT3070 is not set
-# CONFIG_RT3090 is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_RTC_DEBUG is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-CONFIG_RTC_DRV_CMOS=y
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_EP93XX is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-# CONFIG_RTC_DRV_PCF50606 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_PL030 is not set
-# CONFIG_RTC_DRV_PL031 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_RTC7301 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_LIB=y
-# CONFIG_RTL8180 is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_RTL8187SE is not set
-# CONFIG_RTL8192E is not set
-# CONFIG_RTL8192SU is not set
-# CONFIG_RTL8192U is not set
-# CONFIG_RTL8306_PHY is not set
-# CONFIG_RTL8366RB_PHY is not set
-# CONFIG_RTL8366S_PHY is not set
-# CONFIG_RTL8366S_PHY_DEBUG_FS is not set
-# CONFIG_RTL8366_SMI is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_RUNTIME_DEBUG is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_S2IO is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_SATA_PMP is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_SVW is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SBC_FITPC2_WATCHDOG is not set
-# CONFIG_SC92031 is not set
-# CONFIG_SCC is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_SCHED_BFS is not set
-CONFIG_SCHED_CFS=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_7000FASST is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_ESP_CORE is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_LOGGING is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_MPT2SAS is not set
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_MVSAS_DEBUG is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_PMCRAID is not set
-CONFIG_SCSI_PROC_FS=y
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-# CONFIG_SCSI_SEAGATE is not set
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_ULTRASTOR is not set
-CONFIG_SCSI_WAIT_SCAN=m
-# CONFIG_SECCOMP is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_APPLESMC is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATK0110 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_CORETEMP is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCHMD is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_HDAPS is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_K8TEMP is not set
-# CONFIG_SENSORS_LIS3LV02D is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_M41T00 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_CS is not set
-CONFIG_SERIAL_8250_NR_UARTS=2
-# CONFIG_SERIAL_8250_PCI is not set
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_MAX3100 is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_UARTLITE is not set
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_SFI is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_SHAPER is not set
-CONFIG_SHMEM=y
-CONFIG_SIGNALFD=y
-# CONFIG_SIMPLE_GPIO is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SKY2_DEBUG is not set
-CONFIG_SLAB=y
-CONFIG_SLABINFO=y
-# CONFIG_SLHC is not set
-# CONFIG_SLICOSS is not set
-# CONFIG_SLIP is not set
-# CONFIG_SLOB is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_SLOW_WORK_DEBUG is not set
-# CONFIG_SLUB is not set
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_SMARTJOYPLUS_FF is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMC91X is not set
-# CONFIG_SMP is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_SND is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-# CONFIG_SND_AD1816A is not set
-# CONFIG_SND_AD1848 is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ADLIB is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ALS100 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_ATMEL_SOC is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT2320 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMI8330 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_CS4231 is not set
-# CONFIG_SND_CS4232 is not set
-# CONFIG_SND_CS4236 is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS5530 is not set
-# CONFIG_SND_CS5535AUDIO is not set
-# CONFIG_SND_CTXFI is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DT019X is not set
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1688 is not set
-# CONFIG_SND_ES18XX is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_ES968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_GUSCLASSIC is not set
-# CONFIG_SND_GUSEXTREME is not set
-# CONFIG_SND_GUSMAX is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_HWDEP is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_INDIGODJX is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGOIOX is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_INTERWAVE is not set
-# CONFIG_SND_INTERWAVE_STB is not set
-# CONFIG_SND_ISA is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_LX6464ES is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_MIPS is not set
-# CONFIG_SND_MIRO is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_OPL3SA2 is not set
-# CONFIG_SND_OPTI92X_AD1848 is not set
-# CONFIG_SND_OPTI92X_CS4231 is not set
-# CONFIG_SND_OPTI93X is not set
-CONFIG_SND_OSSEMUL=y
-# CONFIG_SND_OXYGEN is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_PCM is not set
-# CONFIG_SND_PCMCIA is not set
-# CONFIG_SND_PCM_OSS is not set
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_PDAUDIOCF is not set
-# CONFIG_SND_RAWMIDI is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_RTCTIMER is not set
-# CONFIG_SND_SB16 is not set
-# CONFIG_SND_SB8 is not set
-# CONFIG_SND_SBAWE is not set
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_SGALAXY is not set
-# CONFIG_SND_SIS7019 is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_SSCAPE is not set
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_TIMER is not set
-# CONFIG_SND_TRIDENT is not set
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_USB_UA101 is not set
-# CONFIG_SND_USB_US122L is not set
-# CONFIG_SND_USB_USX2Y is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_WAVEFRONT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_SOC_CAMERA is not set
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_SONYPI is not set
-# CONFIG_SONY_LAPTOP is not set
-# CONFIG_SOUND is not set
-# CONFIG_SOUND_PRIME is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-# CONFIG_SPI is not set
-# CONFIG_SPINLOCK_TEST is not set
-# CONFIG_SPI_AT25 is not set
-# CONFIG_SPI_DEBUG is not set
-# CONFIG_SPI_DESIGNWARE is not set
-# CONFIG_SPI_GPIO_OLD is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_SPI_ORION is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_SPI_XILINX is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_SQUASHFS=y
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-CONFIG_SQUASHFS_LZMA=y
-CONFIG_SQUASHFS_SUPPORT_ZLIB=y
-# CONFIG_SQUASHFS_VMALLOC is not set
-# CONFIG_SSB is not set
-# CONFIG_SSB_DEBUG is not set
-# CONFIG_SSB_PCMCIAHOST is not set
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB_SDIOHOST is not set
-# CONFIG_SSB_SILENT is not set
-# CONFIG_SSFDC is not set
-CONFIG_STACKTRACE_SUPPORT=y
-# CONFIG_STACK_TRACER is not set
-CONFIG_STAGING=y
-# CONFIG_STAGING_EXCLUDE_BUILD is not set
-CONFIG_STANDALONE=y
-CONFIG_STDBINUTILS=y
-# CONFIG_STE10XP is not set
-CONFIG_STP=y
-# CONFIG_STRIP is not set
-CONFIG_STRIP_ASM_SYMS=y
-# CONFIG_SUNDANCE is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_SUNRPC is not set
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_SUNRPC_GSS is not set
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_SUN_PARTITION is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SWAP=y
-# CONFIG_SWCONFIG is not set
-# CONFIG_SYNCLINK_CS is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_SYSCTL=y
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_SYSFS=y
-# CONFIG_SYSFS_DEPRECATED is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_TCIC is not set
-CONFIG_TCP_CONG_ADVANCED=y
-# CONFIG_TCP_CONG_BIC is not set
-# CONFIG_TCP_CONG_CUBIC is not set
-# CONFIG_TCP_CONG_HSTCP is not set
-# CONFIG_TCP_CONG_HTCP is not set
-# CONFIG_TCP_CONG_HYBLA is not set
-# CONFIG_TCP_CONG_ILLINOIS is not set
-# CONFIG_TCP_CONG_LP is not set
-# CONFIG_TCP_CONG_SCALABLE is not set
-# CONFIG_TCP_CONG_VEGAS is not set
-# CONFIG_TCP_CONG_VENO is not set
-CONFIG_TCP_CONG_WESTWOOD=y
-# CONFIG_TCP_CONG_YEAH is not set
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_TEXTSEARCH=y
-# CONFIG_TEXTSEARCH_BM is not set
-# CONFIG_TEXTSEARCH_FSM is not set
-# CONFIG_TEXTSEARCH_KMP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_THRUSTMASTER_FF is not set
-CONFIG_TICK_ONESHOT=y
-# CONFIG_TIFM_CORE is not set
-# CONFIG_TIGON3 is not set
-CONFIG_TIMERFD=y
-# CONFIG_TIMER_STATS is not set
-CONFIG_TINY_RCU=y
-# CONFIG_TINY_SHMEM is not set
-# CONFIG_TIPC is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_TLAN is not set
-# CONFIG_TMD_HERMES is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_FILTER is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_S3C2410 is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TR is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_TRANZPORT is not set
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_TUN is not set
-# CONFIG_TUNER_3036 is not set
-# CONFIG_TUNER_TEA5761 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_UDF_FS is not set
-CONFIG_UDF_NLS=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_UFS_FS is not set
-# CONFIG_UIO is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_UNEVICTABLE_LRU is not set
-# CONFIG_UNION_MOUNT is not set
-CONFIG_UNIX=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_USB is not set
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AIPTEK is not set
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_APPLETOUCH is not set
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARMLINUX=y
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_ATM is not set
-# CONFIG_USB_ATMEL is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_BANDWIDTH is not set
-CONFIG_USB_BELKIN=y
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_CPC is not set
-# CONFIG_USB_CXACRU is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_DABUSB is not set
-# CONFIG_USB_DEBUG is not set
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_EHCI_HCD_PPC_OF is not set
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EPSON2888 is not set
-# CONFIG_USB_ET61X251 is not set
-CONFIG_USB_EZUSB=y
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_GADGET is not set
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GL860 is not set
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_USB_GSPCA is not set
-# CONFIG_USB_GSPCA_BENQ is not set
-# CONFIG_USB_GSPCA_CONEX is not set
-# CONFIG_USB_GSPCA_CPIA1 is not set
-# CONFIG_USB_GSPCA_ETOMS is not set
-# CONFIG_USB_GSPCA_FINEPIX is not set
-# CONFIG_USB_GSPCA_JEILINJ is not set
-# CONFIG_USB_GSPCA_MARS is not set
-# CONFIG_USB_GSPCA_MR97310A is not set
-# CONFIG_USB_GSPCA_OV519 is not set
-# CONFIG_USB_GSPCA_OV534 is not set
-# CONFIG_USB_GSPCA_OV534_9 is not set
-# CONFIG_USB_GSPCA_PAC207 is not set
-# CONFIG_USB_GSPCA_PAC7302 is not set
-# CONFIG_USB_GSPCA_PAC7311 is not set
-# CONFIG_USB_GSPCA_SN9C2028 is not set
-# CONFIG_USB_GSPCA_SN9C20X is not set
-CONFIG_USB_GSPCA_SN9C20X_EVDEV=y
-# CONFIG_USB_GSPCA_SONIXB is not set
-# CONFIG_USB_GSPCA_SONIXJ is not set
-# CONFIG_USB_GSPCA_SPCA500 is not set
-# CONFIG_USB_GSPCA_SPCA501 is not set
-# CONFIG_USB_GSPCA_SPCA505 is not set
-# CONFIG_USB_GSPCA_SPCA506 is not set
-# CONFIG_USB_GSPCA_SPCA508 is not set
-# CONFIG_USB_GSPCA_SPCA561 is not set
-# CONFIG_USB_GSPCA_SQ905 is not set
-# CONFIG_USB_GSPCA_SQ905C is not set
-# CONFIG_USB_GSPCA_STK014 is not set
-# CONFIG_USB_GSPCA_STV0680 is not set
-# CONFIG_USB_GSPCA_SUNPLUS is not set
-# CONFIG_USB_GSPCA_T613 is not set
-# CONFIG_USB_GSPCA_TV8532 is not set
-# CONFIG_USB_GSPCA_VC032X is not set
-# CONFIG_USB_GSPCA_ZC3XX is not set
-# CONFIG_USB_G_MULTI is not set
-# CONFIG_USB_G_NOKIA is not set
-# CONFIG_USB_HID is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_HIDINPUT=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_USB_HSO is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_IPHETH is not set
-# CONFIG_USB_IP_COMMON is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_KC2190 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LIBUSUAL is not set
-# CONFIG_USB_M5602 is not set
-# CONFIG_USB_MASS_STORAGE is not set
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_NET_AX8817X is not set
-# CONFIG_USB_NET_CDCETHER is not set
-# CONFIG_USB_NET_CDC_EEM is not set
-# CONFIG_USB_NET_CDC_SUBSET is not set
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_GL620A is not set
-# CONFIG_USB_NET_INT51X1 is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_NET1080 is not set
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_USB_NET_SMSC75XX is not set
-# CONFIG_USB_NET_SMSC95XX is not set
-# CONFIG_USB_NET_ZAURUS is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_OHCI_HCD_PCI is not set
-# CONFIG_USB_OHCI_HCD_PPC_OF is not set
-# CONFIG_USB_OHCI_HCD_PPC_SOC is not set
-# CONFIG_USB_OHCI_HCD_SSB is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_PWC_INPUT_EVDEV is not set
-# CONFIG_USB_QUICKCAM_MESSENGER is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_S2255 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SERIAL is not set
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CP210X is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_QCAUX is not set
-# CONFIG_USB_SERIAL_QUALCOMM is not set
-# CONFIG_USB_SERIAL_QUATECH2 is not set
-# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-CONFIG_USB_SERIAL_SAFE_PADDED=y
-# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_SYMBOL is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_SIERRA_NET is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_SPEEDTOUCH is not set
-# CONFIG_USB_STKWEBCAM is not set
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_DPCM=y
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_SIERRA is not set
-# CONFIG_USB_STV06XX is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_TMC is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_UEAGLEATM is not set
-# CONFIG_USB_ULPI is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_VIDEO_CLASS is not set
-CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
-# CONFIG_USB_VST is not set
-# CONFIG_USB_W9968CF is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-# CONFIG_USB_XHCI_HCD is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_XUSBATM is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_ZC0301 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_ZR364XX is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_UWB is not set
-# CONFIG_VETH is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VGA_ARB is not set
-# CONFIG_VGA_SWITCHEROO is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_VIDEO_ADV7170 is not set
-# CONFIG_VIDEO_ADV7175 is not set
-# CONFIG_VIDEO_ADV7180 is not set
-# CONFIG_VIDEO_ADV7343 is not set
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_ALLOW_V4L1 is not set
-# CONFIG_VIDEO_BT819 is not set
-# CONFIG_VIDEO_BT848 is not set
-# CONFIG_VIDEO_BT856 is not set
-# CONFIG_VIDEO_BT866 is not set
-# CONFIG_VIDEO_CAFE_CCIC is not set
-# CONFIG_VIDEO_CAPTURE_DRIVERS is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CS5345 is not set
-# CONFIG_VIDEO_CS53L32A is not set
-# CONFIG_VIDEO_CX231XX is not set
-# CONFIG_VIDEO_CX2341X is not set
-# CONFIG_VIDEO_CX25840 is not set
-# CONFIG_VIDEO_CX88 is not set
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_VIDEO_DPC is not set
-# CONFIG_VIDEO_EM28XX is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-# CONFIG_VIDEO_GO7007 is not set
-# CONFIG_VIDEO_HDPVR is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-# CONFIG_VIDEO_HEXIUM_GEMINI is not set
-# CONFIG_VIDEO_HEXIUM_ORION is not set
-# CONFIG_VIDEO_IR_I2C is not set
-# CONFIG_VIDEO_IVTV is not set
-# CONFIG_VIDEO_KS0127 is not set
-# CONFIG_VIDEO_M52790 is not set
-# CONFIG_VIDEO_MEDIA is not set
-# CONFIG_VIDEO_MSP3400 is not set
-# CONFIG_VIDEO_MT9V011 is not set
-# CONFIG_VIDEO_MXB is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_VIDEO_OV7670 is not set
-# CONFIG_VIDEO_OVCAMCHIP is not set
-# CONFIG_VIDEO_PMS is not set
-# CONFIG_VIDEO_PVRUSB2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_VIDEO_SAA6588 is not set
-# CONFIG_VIDEO_SAA7110 is not set
-# CONFIG_VIDEO_SAA7111 is not set
-# CONFIG_VIDEO_SAA7114 is not set
-# CONFIG_VIDEO_SAA711X is not set
-# CONFIG_VIDEO_SAA7127 is not set
-# CONFIG_VIDEO_SAA7134 is not set
-# CONFIG_VIDEO_SAA717X is not set
-# CONFIG_VIDEO_SAA7185 is not set
-# CONFIG_VIDEO_SAA7191 is not set
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
-# CONFIG_VIDEO_STRADIS is not set
-# CONFIG_VIDEO_TCM825X is not set
-# CONFIG_VIDEO_TDA7432 is not set
-# CONFIG_VIDEO_TDA9840 is not set
-# CONFIG_VIDEO_TDA9875 is not set
-# CONFIG_VIDEO_TEA6415C is not set
-# CONFIG_VIDEO_TEA6420 is not set
-# CONFIG_VIDEO_THS7303 is not set
-# CONFIG_VIDEO_TLV320AIC23B is not set
-# CONFIG_VIDEO_TVAUDIO is not set
-# CONFIG_VIDEO_TVP514X is not set
-# CONFIG_VIDEO_TVP5150 is not set
-# CONFIG_VIDEO_TVP7002 is not set
-# CONFIG_VIDEO_UPD64031A is not set
-# CONFIG_VIDEO_UPD64083 is not set
-# CONFIG_VIDEO_USBVISION is not set
-# CONFIG_VIDEO_V4L1 is not set
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_VIDEO_V4L2 is not set
-# CONFIG_VIDEO_V4L2_COMMON is not set
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_VP27SMPX is not set
-# CONFIG_VIDEO_VPX3220 is not set
-# CONFIG_VIDEO_WM8739 is not set
-# CONFIG_VIDEO_WM8775 is not set
-# CONFIG_VIDEO_ZORAN is not set
-# CONFIG_VIRQ_DEBUG is not set
-# CONFIG_VIRTUALIZATION is not set
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_VITESSE_PHY is not set
-CONFIG_VLAN_8021Q=y
-# CONFIG_VLAN_8021Q_GVRP is not set
-# CONFIG_VME_BUS is not set
-# CONFIG_VMSPLIT_1G is not set
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_2G_OPT is not set
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_3G_OPT is not set
-# CONFIG_VMWARE_BALLOON is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_VT is not set
-# CONFIG_VT6655 is not set
-# CONFIG_VT6656 is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_W1 is not set
-# CONFIG_W1_CON is not set
-# CONFIG_W1_MASTER_DS1WM is not set
-# CONFIG_W1_MASTER_DS2482 is not set
-# CONFIG_W1_MASTER_DS2490 is not set
-# CONFIG_W1_MASTER_GPIO is not set
-# CONFIG_W1_MASTER_MATROX is not set
-# CONFIG_W1_SLAVE_BQ27000 is not set
-# CONFIG_W1_SLAVE_DS2431 is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2760 is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W83627HF_WDT is not set
-# CONFIG_W83697HF_WDT is not set
-# CONFIG_W83877F_WDT is not set
-# CONFIG_W83977F_WDT is not set
-# CONFIG_WAN is not set
-# CONFIG_WANXL is not set
-# CONFIG_WAN_ROUTER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-# CONFIG_WAVELAN is not set
-# CONFIG_WDTPCI is not set
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PRIV=y
-CONFIG_WEXT_PROC=y
-CONFIG_WEXT_SPY=y
-# CONFIG_WIMAX is not set
-CONFIG_WIRELESS=y
-CONFIG_WIRELESS_EXT=y
-# CONFIG_WIRELESS_EXT_SYSFS is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WLAN=y
-CONFIG_WLAN_80211=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_X25 is not set
-CONFIG_XFRM=y
-# CONFIG_XFRM_IPCOMP is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_SECURITY is not set
-# CONFIG_XILINX_EMACLITE is not set
-# CONFIG_XILINX_LL_TEMAC is not set
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_YAFFS_FS is not set
-# CONFIG_YAM is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_YENTA is not set
-# CONFIG_YENTA_O2 is not set
-# CONFIG_YENTA_RICOH is not set
-# CONFIG_YENTA_TI is not set
-# CONFIG_YENTA_TOSHIBA is not set
-# CONFIG_ZD1211RW is not set
-# CONFIG_ZD1211RW_DEBUG is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_ZISOFS=y
-# CONFIG_ZISOFS_FS is not set
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZONE_DMA=y
-CONFIG_ZONE_DMA_FLAG=1

target/linux/generic/patches-2.6.34/006-squashfs_add_lzma.patch

@@ -1,217 +0,0 @@
-From f49e1efdd179d54e814ff2a8e8f469496583062c Mon Sep 17 00:00:00 2001
-From: Phillip Lougher <[email protected]>
-Date: Tue, 20 Oct 2009 10:54:36 +0100
-Subject: [PATCH] Squashfs: add LZMA compression
-
-Add support for LZMA compressed filesystems.  This is an initial
-implementation.
-
-Signed-off-by: Phillip Lougher <[email protected]>
----
- fs/squashfs/Kconfig        |    5 ++
- fs/squashfs/Makefile       |    1 +
- fs/squashfs/decompressor.c |    4 +
- fs/squashfs/lzma_wrapper.c |  151 ++++++++++++++++++++++++++++++++++++++++++++
- fs/squashfs/squashfs.h     |    3 +
- 5 files changed, 164 insertions(+), 0 deletions(-)
- create mode 100644 fs/squashfs/lzma_wrapper.c
-
---- a/fs/squashfs/Kconfig
-+++ b/fs/squashfs/Kconfig
-@@ -26,6 +26,11 @@ config SQUASHFS
- 
- 	  If unsure, say N.
- 
-+config SQUASHFS_LZMA
-+	bool "Include support for LZMA compressed file systems"
-+	depends on SQUASHFS
-+	select DECOMPRESS_LZMA
-+
- config SQUASHFS_EMBEDDED
- 
- 	bool "Additional option for memory-constrained systems" 
---- a/fs/squashfs/Makefile
-+++ b/fs/squashfs/Makefile
-@@ -5,3 +5,4 @@
- obj-$(CONFIG_SQUASHFS) += squashfs.o
- squashfs-y += block.o cache.o dir.o export.o file.o fragment.o id.o inode.o
- squashfs-y += namei.o super.o symlink.o zlib_wrapper.o decompressor.o
-+squashfs-$(CONFIG_SQUASHFS_LZMA) += lzma_wrapper.o
---- a/fs/squashfs/decompressor.c
-+++ b/fs/squashfs/decompressor.c
-@@ -50,7 +50,11 @@ static const struct squashfs_decompresso
- 
- static const struct squashfs_decompressor *decompressor[] = {
- 	&squashfs_zlib_comp_ops,
-+#ifdef CONFIG_SQUASHFS_LZMA
-+	&squashfs_lzma_comp_ops,
-+#else
- 	&squashfs_lzma_unsupported_comp_ops,
-+#endif
- 	&squashfs_lzo_unsupported_comp_ops,
- 	&squashfs_unknown_comp_ops
- };
---- /dev/null
-+++ b/fs/squashfs/lzma_wrapper.c
-@@ -0,0 +1,152 @@
-+/*
-+ * Squashfs - a compressed read only filesystem for Linux
-+ *
-+ * Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
-+ * Phillip Lougher <[email protected]>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2,
-+ * or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-+ *
-+ * lzma_wrapper.c
-+ */
-+
-+#include <asm/unaligned.h>
-+#include <linux/buffer_head.h>
-+#include <linux/mutex.h>
-+#include <linux/vmalloc.h>
-+#include <linux/decompress/unlzma.h>
-+#include <linux/slab.h>
-+
-+#include "squashfs_fs.h"
-+#include "squashfs_fs_sb.h"
-+#include "squashfs_fs_i.h"
-+#include "squashfs.h"
-+#include "decompressor.h"
-+
-+struct squashfs_lzma {
-+	void	*input;
-+	void	*output;
-+};
-+
-+/* decompress_unlzma.c is currently non re-entrant... */
-+DEFINE_MUTEX(lzma_mutex);
-+
-+/* decompress_unlzma.c doesn't provide any context in its callbacks... */
-+static int lzma_error;
-+
-+static void error(char *m)
-+{
-+	ERROR("unlzma error: %s\n", m);
-+	lzma_error = 1;
-+}
-+
-+	
-+static void *lzma_init(struct squashfs_sb_info *msblk)
-+{
-+	struct squashfs_lzma *stream = kzalloc(sizeof(*stream), GFP_KERNEL);
-+	if (stream == NULL)
-+		goto failed;
-+	stream->input = vmalloc(msblk->block_size);
-+	if (stream->input == NULL)
-+		goto failed;
-+	stream->output = vmalloc(msblk->block_size);
-+	if (stream->output == NULL)
-+		goto failed2;
-+
-+	return stream;
-+
-+failed2:
-+	vfree(stream->input);
-+failed:
-+	ERROR("failed to allocate lzma workspace\n");
-+	kfree(stream);
-+	return NULL;
-+}
-+
-+
-+static void lzma_free(void *strm)
-+{
-+	struct squashfs_lzma *stream = strm;
-+
-+	if (stream) {
-+		vfree(stream->input);
-+		vfree(stream->output);
-+	}
-+	kfree(stream);
-+}
-+
-+
-+static int lzma_uncompress(struct squashfs_sb_info *msblk, void **buffer,
-+	struct buffer_head **bh, int b, int offset, int length, int srclength,
-+	int pages)
-+{
-+	struct squashfs_lzma *stream = msblk->stream;
-+	void *buff = stream->input;
-+	int avail, i, bytes = length, res;
-+
-+	mutex_lock(&lzma_mutex);
-+
-+	for (i = 0; i < b; i++) {
-+		wait_on_buffer(bh[i]);
-+		if (!buffer_uptodate(bh[i]))
-+			goto block_release;
-+
-+		avail = min(bytes, msblk->devblksize - offset);
-+		memcpy(buff, bh[i]->b_data + offset, avail);
-+		buff += avail;
-+		bytes -= avail;
-+		offset = 0;
-+		put_bh(bh[i]);
-+	}
-+
-+	lzma_error = 0;
-+	res = unlzma(stream->input, length, NULL, NULL, stream->output, NULL,
-+							error);
-+	if (res || lzma_error)
-+		goto failed;
-+
-+	/* uncompressed size is stored in the LZMA header (5 byte offset) */
-+	res = bytes = get_unaligned_le32(stream->input + 5);
-+	for (i = 0, buff = stream->output; bytes && i < pages; i++) {
-+		avail = min_t(int, bytes, PAGE_CACHE_SIZE);
-+		memcpy(buffer[i], buff, avail);
-+		buff += avail;
-+		bytes -= avail;
-+	}
-+	if (bytes)
-+		goto failed;
-+
-+	mutex_unlock(&lzma_mutex);
-+	return res;
-+
-+block_release:
-+	for (; i < b; i++)
-+		put_bh(bh[i]);
-+
-+failed:
-+	mutex_unlock(&lzma_mutex);
-+
-+	ERROR("lzma decompression failed, data probably corrupt\n");
-+	return -EIO;
-+}
-+
-+const struct squashfs_decompressor squashfs_lzma_comp_ops = {
-+	.init = lzma_init,
-+	.free = lzma_free,
-+	.decompress = lzma_uncompress,
-+	.id = LZMA_COMPRESSION,
-+	.name = "lzma",
-+	.supported = 1
-+};
-+
---- a/fs/squashfs/squashfs.h
-+++ b/fs/squashfs/squashfs.h
-@@ -94,3 +94,6 @@ extern const struct address_space_operat
- 
- /* zlib_wrapper.c */
- extern const struct squashfs_decompressor squashfs_zlib_comp_ops;
-+
-+/* lzma wrapper.c */
-+extern const struct squashfs_decompressor squashfs_lzma_comp_ops;

target/linux/generic/patches-2.6.34/007-squashfs_make_lzma_available.patch

@@ -1,165 +0,0 @@
-From fdf23ed283bc6ef5c25076ce2065f892120ff556 Mon Sep 17 00:00:00 2001
-From: Phillip Lougher <[email protected]>
-Date: Thu, 22 Oct 2009 04:57:38 +0100
-Subject: [PATCH] Squashfs: Make unlzma available to non initramfs/initrd code
-
-Add a config option DECOMPRESS_LZMA_NEEDED which allows subsystems to
-specify they need the unlzma code.  Normally decompress_unlzma.c is
-compiled with __init and unlzma is not exported to modules.
-
-Signed-off-by: Phillip Lougher <[email protected]>
----
- fs/squashfs/Kconfig                   |    1 +
- include/linux/decompress/bunzip2_mm.h |   12 ++++++++++++
- include/linux/decompress/inflate_mm.h |   12 ++++++++++++
- include/linux/decompress/mm.h         |    3 ---
- include/linux/decompress/unlzma_mm.h  |   20 ++++++++++++++++++++
- lib/Kconfig                           |    3 +++
- lib/decompress_bunzip2.c              |    1 +
- lib/decompress_inflate.c              |    1 +
- lib/decompress_unlzma.c               |    5 ++++-
- 9 files changed, 54 insertions(+), 4 deletions(-)
- create mode 100644 include/linux/decompress/bunzip2_mm.h
- create mode 100644 include/linux/decompress/inflate_mm.h
- create mode 100644 include/linux/decompress/unlzma_mm.h
-
---- a/fs/squashfs/Kconfig
-+++ b/fs/squashfs/Kconfig
-@@ -30,6 +30,7 @@ config SQUASHFS_LZMA
- 	bool "Include support for LZMA compressed file systems"
- 	depends on SQUASHFS
- 	select DECOMPRESS_LZMA
-+	select DECOMPRESS_LZMA_NEEDED
- 
- config SQUASHFS_EMBEDDED
- 
---- /dev/null
-+++ b/include/linux/decompress/bunzip2_mm.h
-@@ -0,0 +1,12 @@
-+#ifndef BUNZIP2_MM_H
-+#define BUNZIP2_MM_H
-+
-+#ifdef STATIC
-+/* Code active when included from pre-boot environment: */
-+#define INIT
-+#else
-+/* Compile for initramfs/initrd code only */
-+#define INIT __init
-+#endif
-+
-+#endif
---- /dev/null
-+++ b/include/linux/decompress/inflate_mm.h
-@@ -0,0 +1,12 @@
-+#ifndef INFLATE_MM_H
-+#define INFLATE_MM_H
-+
-+#ifdef STATIC
-+/* Code active when included from pre-boot environment: */
-+#define INIT
-+#else
-+/* Compile for initramfs/initrd code only */
-+#define INIT __init
-+#endif
-+
-+#endif
---- a/include/linux/decompress/mm.h
-+++ b/include/linux/decompress/mm.h
-@@ -63,8 +63,6 @@ static void free(void *where)
- 
- #define set_error_fn(x)
- 
--#define INIT
--
- #else /* STATIC */
- 
- /* Code active when compiled standalone for use when loading ramdisk: */
-@@ -87,7 +85,6 @@ static void free(void *where)
- static void(*error)(char *m);
- #define set_error_fn(x) error = x;
- 
--#define INIT __init
- #define STATIC
- 
- #include <linux/init.h>
---- /dev/null
-+++ b/include/linux/decompress/unlzma_mm.h
-@@ -0,0 +1,20 @@
-+#ifndef UNLZMA_MM_H
-+#define UNLZMA_MM_H
-+
-+#ifdef STATIC
-+
-+/* Code active when included from pre-boot environment: */
-+#define INIT
-+
-+#elif defined(CONFIG_DECOMPRESS_LZMA_NEEDED)
-+
-+/* Make it available to non initramfs/initrd code */
-+#define INIT
-+#include <linux/module.h>
-+#else
-+
-+/* Compile for initramfs/initrd code only */
-+#define INIT __init
-+#endif
-+
-+#endif
---- a/lib/Kconfig
-+++ b/lib/Kconfig
-@@ -121,6 +121,9 @@ config DECOMPRESS_LZO
- 	select LZO_DECOMPRESS
- 	tristate
- 
-+config DECOMPRESS_LZMA_NEEDED
-+	 boolean
-+
- #
- # Generic allocator support is selected if needed
- #
---- a/lib/decompress_bunzip2.c
-+++ b/lib/decompress_bunzip2.c
-@@ -52,6 +52,7 @@
- #include <linux/slab.h>
- #endif /* STATIC */
- 
-+#include <linux/decompress/bunzip2_mm.h>
- #include <linux/decompress/mm.h>
- 
- #ifndef INT_MAX
---- a/lib/decompress_inflate.c
-+++ b/lib/decompress_inflate.c
-@@ -23,6 +23,7 @@
- 
- #endif /* STATIC */
- 
-+#include <linux/decompress/inflate_mm.h>
- #include <linux/decompress/mm.h>
- 
- #define GZIP_IOBUF_SIZE (16*1024)
---- a/lib/decompress_unlzma.c
-+++ b/lib/decompress_unlzma.c
-@@ -36,6 +36,7 @@
- #include <linux/slab.h>
- #endif /* STATIC */
- 
-+#include <linux/decompress/unlzma_mm.h>
- #include <linux/decompress/mm.h>
- 
- #define	MIN(a, b) (((a) < (b)) ? (a) : (b))
-@@ -531,7 +532,7 @@ static inline void INIT process_bit1(str
- 
- 
- 
--STATIC inline int INIT unlzma(unsigned char *buf, int in_len,
-+STATIC int INIT unlzma(unsigned char *buf, int in_len,
- 			      int(*fill)(void*, unsigned int),
- 			      int(*flush)(void*, unsigned int),
- 			      unsigned char *output,
-@@ -664,4 +665,6 @@ STATIC int INIT decompress(unsigned char
- {
- 	return unlzma(buf, in_len - 4, fill, flush, output, posp, error_fn);
- }
-+#elif defined(CONFIG_DECOMPRESS_LZMA_NEEDED)
-+EXPORT_SYMBOL(unlzma);
- #endif

target/linux/generic/patches-2.6.34/008-jffs2_make_lzma_available.patch

@@ -1,5142 +0,0 @@
---- a/fs/jffs2/Kconfig
-+++ b/fs/jffs2/Kconfig
-@@ -139,6 +139,15 @@ config JFFS2_LZO
- 	  This feature was added in July, 2007. Say 'N' if you need
- 	  compatibility with older bootloaders or kernels.
- 
-+config JFFS2_LZMA
-+	bool "JFFS2 LZMA compression support" if JFFS2_COMPRESSION_OPTIONS
-+	select LZMA_COMPRESS
-+	select LZMA_DECOMPRESS
-+	depends on JFFS2_FS
-+	default n
-+	help
-+	  JFFS2 wrapper to the LZMA C SDK
-+
- config JFFS2_RTIME
- 	bool "JFFS2 RTIME compression support" if JFFS2_COMPRESSION_OPTIONS
- 	depends on JFFS2_FS
---- a/fs/jffs2/Makefile
-+++ b/fs/jffs2/Makefile
-@@ -18,4 +18,7 @@ jffs2-$(CONFIG_JFFS2_RUBIN)	+= compr_rub
- jffs2-$(CONFIG_JFFS2_RTIME)	+= compr_rtime.o
- jffs2-$(CONFIG_JFFS2_ZLIB)	+= compr_zlib.o
- jffs2-$(CONFIG_JFFS2_LZO)	+= compr_lzo.o
-+jffs2-$(CONFIG_JFFS2_LZMA)      += compr_lzma.o
- jffs2-$(CONFIG_JFFS2_SUMMARY)   += summary.o
-+
-+CFLAGS_compr_lzma.o += -Iinclude/linux -Ilib/lzma
---- a/fs/jffs2/compr.c
-+++ b/fs/jffs2/compr.c
-@@ -319,6 +319,9 @@ int __init jffs2_compressors_init(void)
- #ifdef CONFIG_JFFS2_LZO
- 	jffs2_lzo_init();
- #endif
-+#ifdef CONFIG_JFFS2_LZMA
-+        jffs2_lzma_init();
-+#endif
- /* Setting default compression mode */
- #ifdef CONFIG_JFFS2_CMODE_NONE
- 	jffs2_compression_mode = JFFS2_COMPR_MODE_NONE;
-@@ -342,6 +345,9 @@ int __init jffs2_compressors_init(void)
- int jffs2_compressors_exit(void)
- {
- /* Unregistering compressors */
-+#ifdef CONFIG_JFFS2_LZMA
-+        jffs2_lzma_exit();
-+#endif
- #ifdef CONFIG_JFFS2_LZO
- 	jffs2_lzo_exit();
- #endif
---- a/fs/jffs2/compr.h
-+++ b/fs/jffs2/compr.h
-@@ -28,9 +28,9 @@
- #define JFFS2_DYNRUBIN_PRIORITY  20
- #define JFFS2_LZARI_PRIORITY     30
- #define JFFS2_RTIME_PRIORITY     50
--#define JFFS2_ZLIB_PRIORITY      60
--#define JFFS2_LZO_PRIORITY       80
--
-+#define JFFS2_LZMA_PRIORITY      70
-+#define JFFS2_ZLIB_PRIORITY      80
-+#define JFFS2_LZO_PRIORITY       90
- 
- #define JFFS2_RUBINMIPS_DISABLED /* RUBINs will be used only */
- #define JFFS2_DYNRUBIN_DISABLED  /*	   for decompression */
-@@ -98,5 +98,9 @@ void jffs2_zlib_exit(void);
- int jffs2_lzo_init(void);
- void jffs2_lzo_exit(void);
- #endif
-+#ifdef CONFIG_JFFS2_LZMA
-+int jffs2_lzma_init(void);
-+void jffs2_lzma_exit(void);
-+#endif
- 
- #endif /* __JFFS2_COMPR_H__ */
---- /dev/null
-+++ b/fs/jffs2/compr_lzma.c
-@@ -0,0 +1,128 @@
-+/*
-+ * JFFS2 -- Journalling Flash File System, Version 2.
-+ *
-+ * For licensing information, see the file 'LICENCE' in this directory.
-+ *
-+ * JFFS2 wrapper to the LZMA C SDK
-+ *
-+ */
-+
-+#include <linux/lzma.h>
-+#include "compr.h"
-+
-+#ifdef __KERNEL__
-+	static DEFINE_MUTEX(deflate_mutex);
-+#endif
-+
-+CLzmaEncHandle *p;
-+Byte propsEncoded[LZMA_PROPS_SIZE];
-+SizeT propsSize = sizeof(propsEncoded);
-+
-+STATIC void lzma_free_workspace(void)
-+{
-+	LzmaEnc_Destroy(p, &lzma_alloc, &lzma_alloc);
-+}
-+
-+STATIC int INIT lzma_alloc_workspace(CLzmaEncProps *props)
-+{
-+	if ((p = (CLzmaEncHandle *)LzmaEnc_Create(&lzma_alloc)) == NULL)
-+	{
-+		PRINT_ERROR("Failed to allocate lzma deflate workspace\n");
-+		return -ENOMEM;
-+	}
-+
-+	if (LzmaEnc_SetProps(p, props) != SZ_OK)
-+	{
-+		lzma_free_workspace();
-+		return -1;
-+	}
-+	
-+	if (LzmaEnc_WriteProperties(p, propsEncoded, &propsSize) != SZ_OK)
-+	{
-+		lzma_free_workspace();
-+		return -1;
-+	}
-+
-+        return 0;
-+}
-+
-+STATIC int jffs2_lzma_compress(unsigned char *data_in, unsigned char *cpage_out,
-+			      uint32_t *sourcelen, uint32_t *dstlen, void *model)
-+{
-+	SizeT compress_size = (SizeT)(*dstlen);
-+	int ret;
-+
-+	#ifdef __KERNEL__
-+		mutex_lock(&deflate_mutex);
-+	#endif
-+
-+	ret = LzmaEnc_MemEncode(p, cpage_out, &compress_size, data_in, *sourcelen,
-+		0, NULL, &lzma_alloc, &lzma_alloc);
-+
-+	#ifdef __KERNEL__
-+		mutex_unlock(&deflate_mutex);
-+	#endif
-+
-+	if (ret != SZ_OK)
-+		return -1;
-+
-+	*dstlen = (uint32_t)compress_size;
-+
-+	return 0;
-+}
-+
-+STATIC int jffs2_lzma_decompress(unsigned char *data_in, unsigned char *cpage_out,
-+				 uint32_t srclen, uint32_t destlen, void *model)
-+{
-+	int ret;
-+	SizeT dl = (SizeT)destlen;
-+	SizeT sl = (SizeT)srclen;
-+	ELzmaStatus status;
-+	
-+	ret = LzmaDecode(cpage_out, &dl, data_in, &sl, propsEncoded,
-+		propsSize, LZMA_FINISH_ANY, &status, &lzma_alloc);
-+
-+	if (ret != SZ_OK || status == LZMA_STATUS_NOT_FINISHED || dl != (SizeT)destlen)
-+		return -1;
-+
-+	return 0;
-+}
-+
-+static struct jffs2_compressor jffs2_lzma_comp = {
-+	.priority = JFFS2_LZMA_PRIORITY,
-+	.name = "lzma",
-+	.compr = JFFS2_COMPR_LZMA,
-+	.compress = &jffs2_lzma_compress,
-+	.decompress = &jffs2_lzma_decompress,
-+	.disabled = 0,
-+};
-+
-+int INIT jffs2_lzma_init(void)
-+{
-+        int ret;
-+	CLzmaEncProps props;
-+	LzmaEncProps_Init(&props);
-+
-+        props.dictSize = LZMA_BEST_DICT(0x2000);
-+        props.level = LZMA_BEST_LEVEL;
-+        props.lc = LZMA_BEST_LC;
-+        props.lp = LZMA_BEST_LP;
-+        props.pb = LZMA_BEST_PB;
-+        props.fb = LZMA_BEST_FB;
-+
-+	ret = lzma_alloc_workspace(&props);
-+        if (ret < 0)
-+                return ret;
-+
-+	ret = jffs2_register_compressor(&jffs2_lzma_comp);
-+	if (ret)
-+		lzma_free_workspace();
-+	
-+        return ret;
-+}
-+
-+void jffs2_lzma_exit(void)
-+{
-+	jffs2_unregister_compressor(&jffs2_lzma_comp);
-+	lzma_free_workspace();
-+}
---- a/fs/jffs2/super.c
-+++ b/fs/jffs2/super.c
-@@ -254,14 +254,41 @@ static int __init init_jffs2_fs(void)
- 	BUILD_BUG_ON(sizeof(struct jffs2_raw_inode) != 68);
- 	BUILD_BUG_ON(sizeof(struct jffs2_raw_summary) != 32);
- 
--	printk(KERN_INFO "JFFS2 version 2.2."
-+	printk(KERN_INFO "JFFS2 version 2.2"
- #ifdef CONFIG_JFFS2_FS_WRITEBUFFER
- 	       " (NAND)"
- #endif
- #ifdef CONFIG_JFFS2_SUMMARY
--	       " (SUMMARY) "
-+	       " (SUMMARY)"
- #endif
--	       " © 2001-2006 Red Hat, Inc.\n");
-+#ifdef CONFIG_JFFS2_ZLIB
-+	       " (ZLIB)"
-+#endif
-+#ifdef CONFIG_JFFS2_LZO
-+	       " (LZO)"
-+#endif
-+#ifdef CONFIG_JFFS2_LZMA
-+	       " (LZMA)"
-+#endif
-+#ifdef CONFIG_JFFS2_RTIME
-+	       " (RTIME)"
-+#endif
-+#ifdef CONFIG_JFFS2_RUBIN
-+	       " (RUBIN)"
-+#endif
-+#ifdef  CONFIG_JFFS2_CMODE_NONE
-+	       " (CMODE_NONE)"
-+#endif
-+#ifdef CONFIG_JFFS2_CMODE_PRIORITY
-+	       " (CMODE_PRIORITY)"
-+#endif
-+#ifdef CONFIG_JFFS2_CMODE_SIZE
-+	       " (CMODE_SIZE)"
-+#endif
-+#ifdef CONFIG_JFFS2_CMODE_FAVOURLZO
-+	       " (CMODE_FAVOURLZO)"
-+#endif
-+	       " (c) 2001-2006 Red Hat, Inc.\n");
- 
- 	jffs2_inode_cachep = kmem_cache_create("jffs2_i",
- 					     sizeof(struct jffs2_inode_info),
---- a/include/linux/jffs2.h
-+++ b/include/linux/jffs2.h
-@@ -45,6 +45,7 @@
- #define JFFS2_COMPR_DYNRUBIN	0x05
- #define JFFS2_COMPR_ZLIB	0x06
- #define JFFS2_COMPR_LZO		0x07
-+#define JFFS2_COMPR_LZMA	0x08
- /* Compatibility flags. */
- #define JFFS2_COMPAT_MASK 0xc000      /* What do to if an unknown nodetype is found */
- #define JFFS2_NODE_ACCURATE 0x2000
---- /dev/null
-+++ b/include/linux/lzma.h
-@@ -0,0 +1,62 @@
-+#ifndef __LZMA_H__
-+#define __LZMA_H__
-+
-+#ifdef __KERNEL__
-+	#include <linux/kernel.h>
-+	#include <linux/sched.h>
-+	#include <linux/slab.h>
-+	#include <linux/vmalloc.h>
-+	#include <linux/init.h>
-+	#define LZMA_MALLOC vmalloc
-+	#define LZMA_FREE vfree
-+	#define PRINT_ERROR(msg) printk(KERN_WARNING #msg)
-+	#define INIT __init
-+	#define STATIC static
-+#else
-+	#include <stdint.h>
-+	#include <stdlib.h>
-+	#include <stdio.h>
-+	#include <unistd.h>
-+	#include <string.h>
-+	#include <asm/types.h>
-+	#include <errno.h>
-+	#include <linux/jffs2.h>
-+	#ifndef PAGE_SIZE
-+		extern int page_size;
-+		#define PAGE_SIZE page_size
-+	#endif
-+	#define LZMA_MALLOC malloc
-+	#define LZMA_FREE free
-+	#define PRINT_ERROR(msg) fprintf(stderr, msg)
-+	#define INIT
-+	#define STATIC
-+#endif
-+
-+#include "lzma/LzmaDec.h"
-+#include "lzma/LzmaEnc.h"
-+
-+#define LZMA_BEST_LEVEL (9)
-+#define LZMA_BEST_LC    (0)
-+#define LZMA_BEST_LP    (0)
-+#define LZMA_BEST_PB    (0)
-+#define LZMA_BEST_FB  (273)
-+
-+#define LZMA_BEST_DICT(n) (((int)((n) / 2)) * 2)
-+
-+static void *p_lzma_malloc(void *p, size_t size)
-+{
-+        if (size == 0)
-+                return NULL;
-+
-+        return LZMA_MALLOC(size);
-+}
-+
-+static void p_lzma_free(void *p, void *address)
-+{
-+        if (address != NULL)
-+                LZMA_FREE(address);
-+}
-+
-+static ISzAlloc lzma_alloc = {p_lzma_malloc, p_lzma_free};
-+
-+#endif
---- /dev/null
-+++ b/include/linux/lzma/LzFind.h
-@@ -0,0 +1,115 @@
-+/* LzFind.h -- Match finder for LZ algorithms
-+2009-04-22 : Igor Pavlov : Public domain */
-+
-+#ifndef __LZ_FIND_H
-+#define __LZ_FIND_H
-+
-+#include "Types.h"
-+
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+typedef UInt32 CLzRef;
-+
-+typedef struct _CMatchFinder
-+{
-+  Byte *buffer;
-+  UInt32 pos;
-+  UInt32 posLimit;
-+  UInt32 streamPos;
-+  UInt32 lenLimit;
-+
-+  UInt32 cyclicBufferPos;
-+  UInt32 cyclicBufferSize; /* it must be = (historySize + 1) */
-+
-+  UInt32 matchMaxLen;
-+  CLzRef *hash;
-+  CLzRef *son;
-+  UInt32 hashMask;
-+  UInt32 cutValue;
-+
-+  Byte *bufferBase;
-+  ISeqInStream *stream;
-+  int streamEndWasReached;
-+
-+  UInt32 blockSize;
-+  UInt32 keepSizeBefore;
-+  UInt32 keepSizeAfter;
-+
-+  UInt32 numHashBytes;
-+  int directInput;
-+  size_t directInputRem;
-+  int btMode;
-+  int bigHash;
-+  UInt32 historySize;
-+  UInt32 fixedHashSize;
-+  UInt32 hashSizeSum;
-+  UInt32 numSons;
-+  SRes result;
-+  UInt32 crc[256];
-+} CMatchFinder;
-+
-+#define Inline_MatchFinder_GetPointerToCurrentPos(p) ((p)->buffer)
-+#define Inline_MatchFinder_GetIndexByte(p, index) ((p)->buffer[(Int32)(index)])
-+
-+#define Inline_MatchFinder_GetNumAvailableBytes(p) ((p)->streamPos - (p)->pos)
-+
-+int MatchFinder_NeedMove(CMatchFinder *p);
-+Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p);
-+void MatchFinder_MoveBlock(CMatchFinder *p);
-+void MatchFinder_ReadIfRequired(CMatchFinder *p);
-+
-+void MatchFinder_Construct(CMatchFinder *p);
-+
-+/* Conditions:
-+     historySize <= 3 GB
-+     keepAddBufferBefore + matchMaxLen + keepAddBufferAfter < 511MB
-+*/
-+int MatchFinder_Create(CMatchFinder *p, UInt32 historySize,
-+    UInt32 keepAddBufferBefore, UInt32 matchMaxLen, UInt32 keepAddBufferAfter,
-+    ISzAlloc *alloc);
-+void MatchFinder_Free(CMatchFinder *p, ISzAlloc *alloc);
-+void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems);
-+void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue);
-+
-+UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *buffer, CLzRef *son,
-+    UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 _cutValue,
-+    UInt32 *distances, UInt32 maxLen);
-+
-+/*
-+Conditions:
-+  Mf_GetNumAvailableBytes_Func must be called before each Mf_GetMatchLen_Func.
-+  Mf_GetPointerToCurrentPos_Func's result must be used only before any other function
-+*/
-+
-+typedef void (*Mf_Init_Func)(void *object);
-+typedef Byte (*Mf_GetIndexByte_Func)(void *object, Int32 index);
-+typedef UInt32 (*Mf_GetNumAvailableBytes_Func)(void *object);
-+typedef const Byte * (*Mf_GetPointerToCurrentPos_Func)(void *object);
-+typedef UInt32 (*Mf_GetMatches_Func)(void *object, UInt32 *distances);
-+typedef void (*Mf_Skip_Func)(void *object, UInt32);
-+
-+typedef struct _IMatchFinder
-+{
-+  Mf_Init_Func Init;
-+  Mf_GetIndexByte_Func GetIndexByte;
-+  Mf_GetNumAvailableBytes_Func GetNumAvailableBytes;
-+  Mf_GetPointerToCurrentPos_Func GetPointerToCurrentPos;
-+  Mf_GetMatches_Func GetMatches;
-+  Mf_Skip_Func Skip;
-+} IMatchFinder;
-+
-+void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable);
-+
-+void MatchFinder_Init(CMatchFinder *p);
-+UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances);
-+UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances);
-+void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num);
-+void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num);
-+
-+#ifdef __cplusplus
-+}
-+#endif
-+
-+#endif
---- /dev/null
-+++ b/include/linux/lzma/LzHash.h
-@@ -0,0 +1,54 @@
-+/* LzHash.h -- HASH functions for LZ algorithms
-+2009-02-07 : Igor Pavlov : Public domain */
-+
-+#ifndef __LZ_HASH_H
-+#define __LZ_HASH_H
-+
-+#define kHash2Size (1 << 10)
-+#define kHash3Size (1 << 16)
-+#define kHash4Size (1 << 20)
-+
-+#define kFix3HashSize (kHash2Size)
-+#define kFix4HashSize (kHash2Size + kHash3Size)
-+#define kFix5HashSize (kHash2Size + kHash3Size + kHash4Size)
-+
-+#define HASH2_CALC hashValue = cur[0] | ((UInt32)cur[1] << 8);
-+
-+#define HASH3_CALC { \
-+  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
-+  hash2Value = temp & (kHash2Size - 1); \
-+  hashValue = (temp ^ ((UInt32)cur[2] << 8)) & p->hashMask; }
-+
-+#define HASH4_CALC { \
-+  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
-+  hash2Value = temp & (kHash2Size - 1); \
-+  hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \
-+  hashValue = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)) & p->hashMask; }
-+
-+#define HASH5_CALC { \
-+  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
-+  hash2Value = temp & (kHash2Size - 1); \
-+  hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \
-+  hash4Value = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)); \
-+  hashValue = (hash4Value ^ (p->crc[cur[4]] << 3)) & p->hashMask; \
-+  hash4Value &= (kHash4Size - 1); }
-+
-+/* #define HASH_ZIP_CALC hashValue = ((cur[0] | ((UInt32)cur[1] << 8)) ^ p->crc[cur[2]]) & 0xFFFF; */
-+#define HASH_ZIP_CALC hashValue = ((cur[2] | ((UInt32)cur[0] << 8)) ^ p->crc[cur[1]]) & 0xFFFF;
-+
-+
-+#define MT_HASH2_CALC \
-+  hash2Value = (p->crc[cur[0]] ^ cur[1]) & (kHash2Size - 1);
-+
-+#define MT_HASH3_CALC { \
-+  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
-+  hash2Value = temp & (kHash2Size - 1); \
-+  hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); }
-+
-+#define MT_HASH4_CALC { \
-+  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
-+  hash2Value = temp & (kHash2Size - 1); \
-+  hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \
-+  hash4Value = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)) & (kHash4Size - 1); }
-+
-+#endif
---- /dev/null
-+++ b/include/linux/lzma/LzmaDec.h
-@@ -0,0 +1,231 @@
-+/* LzmaDec.h -- LZMA Decoder
-+2009-02-07 : Igor Pavlov : Public domain */
-+
-+#ifndef __LZMA_DEC_H
-+#define __LZMA_DEC_H
-+
-+#include "Types.h"
-+
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+/* #define _LZMA_PROB32 */
-+/* _LZMA_PROB32 can increase the speed on some CPUs,
-+   but memory usage for CLzmaDec::probs will be doubled in that case */
-+
-+#ifdef _LZMA_PROB32
-+#define CLzmaProb UInt32
-+#else
-+#define CLzmaProb UInt16
-+#endif
-+
-+
-+/* ---------- LZMA Properties ---------- */
-+
-+#define LZMA_PROPS_SIZE 5
-+
-+typedef struct _CLzmaProps
-+{
-+  unsigned lc, lp, pb;
-+  UInt32 dicSize;
-+} CLzmaProps;
-+
-+/* LzmaProps_Decode - decodes properties
-+Returns:
-+  SZ_OK
-+  SZ_ERROR_UNSUPPORTED - Unsupported properties
-+*/
-+
-+SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size);
-+
-+
-+/* ---------- LZMA Decoder state ---------- */
-+
-+/* LZMA_REQUIRED_INPUT_MAX = number of required input bytes for worst case.
-+   Num bits = log2((2^11 / 31) ^ 22) + 26 < 134 + 26 = 160; */
-+
-+#define LZMA_REQUIRED_INPUT_MAX 20
-+
-+typedef struct
-+{
-+  CLzmaProps prop;
-+  CLzmaProb *probs;
-+  Byte *dic;
-+  const Byte *buf;
-+  UInt32 range, code;
-+  SizeT dicPos;
-+  SizeT dicBufSize;
-+  UInt32 processedPos;
-+  UInt32 checkDicSize;
-+  unsigned state;
-+  UInt32 reps[4];
-+  unsigned remainLen;
-+  int needFlush;
-+  int needInitState;
-+  UInt32 numProbs;
-+  unsigned tempBufSize;
-+  Byte tempBuf[LZMA_REQUIRED_INPUT_MAX];
-+} CLzmaDec;
-+
-+#define LzmaDec_Construct(p) { (p)->dic = 0; (p)->probs = 0; }
-+
-+void LzmaDec_Init(CLzmaDec *p);
-+
-+/* There are two types of LZMA streams:
-+     0) Stream with end mark. That end mark adds about 6 bytes to compressed size.
-+     1) Stream without end mark. You must know exact uncompressed size to decompress such stream. */
-+
-+typedef enum
-+{
-+  LZMA_FINISH_ANY,   /* finish at any point */
-+  LZMA_FINISH_END    /* block must be finished at the end */
-+} ELzmaFinishMode;
-+
-+/* ELzmaFinishMode has meaning only if the decoding reaches output limit !!!
-+
-+   You must use LZMA_FINISH_END, when you know that current output buffer
-+   covers last bytes of block. In other cases you must use LZMA_FINISH_ANY.
-+
-+   If LZMA decoder sees end marker before reaching output limit, it returns SZ_OK,
-+   and output value of destLen will be less than output buffer size limit.
-+   You can check status result also.
-+
-+   You can use multiple checks to test data integrity after full decompression:
-+     1) Check Result and "status" variable.
-+     2) Check that output(destLen) = uncompressedSize, if you know real uncompressedSize.
-+     3) Check that output(srcLen) = compressedSize, if you know real compressedSize.
-+        You must use correct finish mode in that case. */
-+
-+typedef enum
-+{
-+  LZMA_STATUS_NOT_SPECIFIED,               /* use main error code instead */
-+  LZMA_STATUS_FINISHED_WITH_MARK,          /* stream was finished with end mark. */
-+  LZMA_STATUS_NOT_FINISHED,                /* stream was not finished */
-+  LZMA_STATUS_NEEDS_MORE_INPUT,            /* you must provide more input bytes */
-+  LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK  /* there is probability that stream was finished without end mark */
-+} ELzmaStatus;
-+
-+/* ELzmaStatus is used only as output value for function call */
-+
-+
-+/* ---------- Interfaces ---------- */
-+
-+/* There are 3 levels of interfaces:
-+     1) Dictionary Interface
-+     2) Buffer Interface
-+     3) One Call Interface
-+   You can select any of these interfaces, but don't mix functions from different
-+   groups for same object. */
-+
-+
-+/* There are two variants to allocate state for Dictionary Interface:
-+     1) LzmaDec_Allocate / LzmaDec_Free
-+     2) LzmaDec_AllocateProbs / LzmaDec_FreeProbs
-+   You can use variant 2, if you set dictionary buffer manually.
-+   For Buffer Interface you must always use variant 1.
-+
-+LzmaDec_Allocate* can return:
-+  SZ_OK
-+  SZ_ERROR_MEM         - Memory allocation error
-+  SZ_ERROR_UNSUPPORTED - Unsupported properties
-+*/
-+   
-+SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc);
-+void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc);
-+
-+SRes LzmaDec_Allocate(CLzmaDec *state, const Byte *prop, unsigned propsSize, ISzAlloc *alloc);
-+void LzmaDec_Free(CLzmaDec *state, ISzAlloc *alloc);
-+
-+/* ---------- Dictionary Interface ---------- */
-+
-+/* You can use it, if you want to eliminate the overhead for data copying from
-+   dictionary to some other external buffer.
-+   You must work with CLzmaDec variables directly in this interface.
-+
-+   STEPS:
-+     LzmaDec_Constr()
-+     LzmaDec_Allocate()
-+     for (each new stream)
-+     {
-+       LzmaDec_Init()
-+       while (it needs more decompression)
-+       {
-+         LzmaDec_DecodeToDic()
-+         use data from CLzmaDec::dic and update CLzmaDec::dicPos
-+       }
-+     }
-+     LzmaDec_Free()
-+*/
-+
-+/* LzmaDec_DecodeToDic
-+   
-+   The decoding to internal dictionary buffer (CLzmaDec::dic).
-+   You must manually update CLzmaDec::dicPos, if it reaches CLzmaDec::dicBufSize !!!
-+
-+finishMode:
-+  It has meaning only if the decoding reaches output limit (dicLimit).
-+  LZMA_FINISH_ANY - Decode just dicLimit bytes.
-+  LZMA_FINISH_END - Stream must be finished after dicLimit.
-+
-+Returns:
-+  SZ_OK
-+    status:
-+      LZMA_STATUS_FINISHED_WITH_MARK
-+      LZMA_STATUS_NOT_FINISHED
-+      LZMA_STATUS_NEEDS_MORE_INPUT
-+      LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
-+  SZ_ERROR_DATA - Data error
-+*/
-+
-+SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit,
-+    const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
-+
-+
-+/* ---------- Buffer Interface ---------- */
-+
-+/* It's zlib-like interface.
-+   See LzmaDec_DecodeToDic description for information about STEPS and return results,
-+   but you must use LzmaDec_DecodeToBuf instead of LzmaDec_DecodeToDic and you don't need
-+   to work with CLzmaDec variables manually.
-+
-+finishMode:
-+  It has meaning only if the decoding reaches output limit (*destLen).
-+  LZMA_FINISH_ANY - Decode just destLen bytes.
-+  LZMA_FINISH_END - Stream must be finished after (*destLen).
-+*/
-+
-+SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen,
-+    const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
-+
-+
-+/* ---------- One Call Interface ---------- */
-+
-+/* LzmaDecode
-+
-+finishMode:
-+  It has meaning only if the decoding reaches output limit (*destLen).
-+  LZMA_FINISH_ANY - Decode just destLen bytes.
-+  LZMA_FINISH_END - Stream must be finished after (*destLen).
-+
-+Returns:
-+  SZ_OK
-+    status:
-+      LZMA_STATUS_FINISHED_WITH_MARK
-+      LZMA_STATUS_NOT_FINISHED
-+      LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
-+  SZ_ERROR_DATA - Data error
-+  SZ_ERROR_MEM  - Memory allocation error
-+  SZ_ERROR_UNSUPPORTED - Unsupported properties
-+  SZ_ERROR_INPUT_EOF - It needs more bytes in input buffer (src).
-+*/
-+
-+SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen,
-+    const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode,
-+    ELzmaStatus *status, ISzAlloc *alloc);
-+
-+#ifdef __cplusplus
-+}
-+#endif
-+
-+#endif
---- /dev/null
-+++ b/include/linux/lzma/LzmaEnc.h
-@@ -0,0 +1,80 @@
-+/*  LzmaEnc.h -- LZMA Encoder
-+2009-02-07 : Igor Pavlov : Public domain */
-+
-+#ifndef __LZMA_ENC_H
-+#define __LZMA_ENC_H
-+
-+#include "Types.h"
-+
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+#define LZMA_PROPS_SIZE 5
-+
-+typedef struct _CLzmaEncProps
-+{
-+  int level;       /*  0 <= level <= 9 */
-+  UInt32 dictSize; /* (1 << 12) <= dictSize <= (1 << 27) for 32-bit version
-+                      (1 << 12) <= dictSize <= (1 << 30) for 64-bit version
-+                       default = (1 << 24) */
-+  int lc;          /* 0 <= lc <= 8, default = 3 */
-+  int lp;          /* 0 <= lp <= 4, default = 0 */
-+  int pb;          /* 0 <= pb <= 4, default = 2 */
-+  int algo;        /* 0 - fast, 1 - normal, default = 1 */
-+  int fb;          /* 5 <= fb <= 273, default = 32 */
-+  int btMode;      /* 0 - hashChain Mode, 1 - binTree mode - normal, default = 1 */
-+  int numHashBytes; /* 2, 3 or 4, default = 4 */
-+  UInt32 mc;        /* 1 <= mc <= (1 << 30), default = 32 */
-+  unsigned writeEndMark;  /* 0 - do not write EOPM, 1 - write EOPM, default = 0 */
-+  int numThreads;  /* 1 or 2, default = 2 */
-+} CLzmaEncProps;
-+
-+void LzmaEncProps_Init(CLzmaEncProps *p);
-+void LzmaEncProps_Normalize(CLzmaEncProps *p);
-+UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2);
-+
-+
-+/* ---------- CLzmaEncHandle Interface ---------- */
-+
-+/* LzmaEnc_* functions can return the following exit codes:
-+Returns:
-+  SZ_OK           - OK
-+  SZ_ERROR_MEM    - Memory allocation error
-+  SZ_ERROR_PARAM  - Incorrect paramater in props
-+  SZ_ERROR_WRITE  - Write callback error.
-+  SZ_ERROR_PROGRESS - some break from progress callback
-+  SZ_ERROR_THREAD - errors in multithreading functions (only for Mt version)
-+*/
-+
-+typedef void * CLzmaEncHandle;
-+
-+CLzmaEncHandle LzmaEnc_Create(ISzAlloc *alloc);
-+void LzmaEnc_Destroy(CLzmaEncHandle p, ISzAlloc *alloc, ISzAlloc *allocBig);
-+SRes LzmaEnc_SetProps(CLzmaEncHandle p, const CLzmaEncProps *props);
-+SRes LzmaEnc_WriteProperties(CLzmaEncHandle p, Byte *properties, SizeT *size);
-+SRes LzmaEnc_Encode(CLzmaEncHandle p, ISeqOutStream *outStream, ISeqInStream *inStream,
-+    ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
-+SRes LzmaEnc_MemEncode(CLzmaEncHandle p, Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
-+    int writeEndMark, ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
-+
-+/* ---------- One Call Interface ---------- */
-+
-+/* LzmaEncode
-+Return code:
-+  SZ_OK               - OK
-+  SZ_ERROR_MEM        - Memory allocation error
-+  SZ_ERROR_PARAM      - Incorrect paramater
-+  SZ_ERROR_OUTPUT_EOF - output buffer overflow
-+  SZ_ERROR_THREAD     - errors in multithreading functions (only for Mt version)
-+*/
-+
-+SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
-+    const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark,
-+    ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
-+
-+#ifdef __cplusplus
-+}
-+#endif
-+
-+#endif
---- /dev/null
-+++ b/include/linux/lzma/Types.h
-@@ -0,0 +1,226 @@
-+/* Types.h -- Basic types
-+2009-11-23 : Igor Pavlov : Public domain */
-+
-+#ifndef __7Z_TYPES_H
-+#define __7Z_TYPES_H
-+
-+#include <stddef.h>
-+
-+#ifdef _WIN32
-+#include <windows.h>
-+#endif
-+
-+#ifndef EXTERN_C_BEGIN
-+#ifdef __cplusplus
-+#define EXTERN_C_BEGIN extern "C" {
-+#define EXTERN_C_END }
-+#else
-+#define EXTERN_C_BEGIN
-+#define EXTERN_C_END
-+#endif
-+#endif
-+
-+EXTERN_C_BEGIN
-+
-+#define SZ_OK 0
-+
-+#define SZ_ERROR_DATA 1
-+#define SZ_ERROR_MEM 2
-+#define SZ_ERROR_CRC 3
-+#define SZ_ERROR_UNSUPPORTED 4
-+#define SZ_ERROR_PARAM 5
-+#define SZ_ERROR_INPUT_EOF 6
-+#define SZ_ERROR_OUTPUT_EOF 7
-+#define SZ_ERROR_READ 8
-+#define SZ_ERROR_WRITE 9
-+#define SZ_ERROR_PROGRESS 10
-+#define SZ_ERROR_FAIL 11
-+#define SZ_ERROR_THREAD 12
-+
-+#define SZ_ERROR_ARCHIVE 16
-+#define SZ_ERROR_NO_ARCHIVE 17
-+
-+typedef int SRes;
-+
-+#ifdef _WIN32
-+typedef DWORD WRes;
-+#else
-+typedef int WRes;
-+#endif
-+
-+#ifndef RINOK
-+#define RINOK(x) { int __result__ = (x); if (__result__ != 0) return __result__; }
-+#endif
-+
-+typedef unsigned char Byte;
-+typedef short Int16;
-+typedef unsigned short UInt16;
-+
-+#ifdef _LZMA_UINT32_IS_ULONG
-+typedef long Int32;
-+typedef unsigned long UInt32;
-+#else
-+typedef int Int32;
-+typedef unsigned int UInt32;
-+#endif
-+
-+#ifdef _SZ_NO_INT_64
-+
-+/* define _SZ_NO_INT_64, if your compiler doesn't support 64-bit integers.
-+   NOTES: Some code will work incorrectly in that case! */
-+
-+typedef long Int64;
-+typedef unsigned long UInt64;
-+
-+#else
-+
-+#if defined(_MSC_VER) || defined(__BORLANDC__)
-+typedef __int64 Int64;
-+typedef unsigned __int64 UInt64;
-+#else
-+typedef long long int Int64;
-+typedef unsigned long long int UInt64;
-+#endif
-+
-+#endif
-+
-+#ifdef _LZMA_NO_SYSTEM_SIZE_T
-+typedef UInt32 SizeT;
-+#else
-+typedef size_t SizeT;
-+#endif
-+
-+typedef int Bool;
-+#define True 1
-+#define False 0
-+
-+
-+#ifdef _WIN32
-+#define MY_STD_CALL __stdcall
-+#else
-+#define MY_STD_CALL
-+#endif
-+
-+#ifdef _MSC_VER
-+
-+#if _MSC_VER >= 1300
-+#define MY_NO_INLINE __declspec(noinline)
-+#else
-+#define MY_NO_INLINE
-+#endif
-+
-+#define MY_CDECL __cdecl
-+#define MY_FAST_CALL __fastcall
-+
-+#else
-+
-+#define MY_CDECL
-+#define MY_FAST_CALL
-+
-+#endif
-+
-+
-+/* The following interfaces use first parameter as pointer to structure */
-+
-+typedef struct
-+{
-+  SRes (*Read)(void *p, void *buf, size_t *size);
-+    /* if (input(*size) != 0 && output(*size) == 0) means end_of_stream.
-+       (output(*size) < input(*size)) is allowed */
-+} ISeqInStream;
-+
-+/* it can return SZ_ERROR_INPUT_EOF */
-+SRes SeqInStream_Read(ISeqInStream *stream, void *buf, size_t size);
-+SRes SeqInStream_Read2(ISeqInStream *stream, void *buf, size_t size, SRes errorType);
-+SRes SeqInStream_ReadByte(ISeqInStream *stream, Byte *buf);
-+
-+typedef struct
-+{
-+  size_t (*Write)(void *p, const void *buf, size_t size);
-+    /* Returns: result - the number of actually written bytes.
-+       (result < size) means error */
-+} ISeqOutStream;
-+
-+typedef enum
-+{
-+  SZ_SEEK_SET = 0,
-+  SZ_SEEK_CUR = 1,
-+  SZ_SEEK_END = 2
-+} ESzSeek;
-+
-+typedef struct
-+{
-+  SRes (*Read)(void *p, void *buf, size_t *size);  /* same as ISeqInStream::Read */
-+  SRes (*Seek)(void *p, Int64 *pos, ESzSeek origin);
-+} ISeekInStream;
-+
-+typedef struct
-+{
-+  SRes (*Look)(void *p, void **buf, size_t *size);
-+    /* if (input(*size) != 0 && output(*size) == 0) means end_of_stream.
-+       (output(*size) > input(*size)) is not allowed
-+       (output(*size) < input(*size)) is allowed */
-+  SRes (*Skip)(void *p, size_t offset);
-+    /* offset must be <= output(*size) of Look */
-+
-+  SRes (*Read)(void *p, void *buf, size_t *size);
-+    /* reads directly (without buffer). It's same as ISeqInStream::Read */
-+  SRes (*Seek)(void *p, Int64 *pos, ESzSeek origin);
-+} ILookInStream;
-+
-+SRes LookInStream_LookRead(ILookInStream *stream, void *buf, size_t *size);
-+SRes LookInStream_SeekTo(ILookInStream *stream, UInt64 offset);
-+
-+/* reads via ILookInStream::Read */
-+SRes LookInStream_Read2(ILookInStream *stream, void *buf, size_t size, SRes errorType);
-+SRes LookInStream_Read(ILookInStream *stream, void *buf, size_t size);
-+
-+#define LookToRead_BUF_SIZE (1 << 14)
-+
-+typedef struct
-+{
-+  ILookInStream s;
-+  ISeekInStream *realStream;
-+  size_t pos;
-+  size_t size;
-+  Byte buf[LookToRead_BUF_SIZE];
-+} CLookToRead;
-+
-+void LookToRead_CreateVTable(CLookToRead *p, int lookahead);
-+void LookToRead_Init(CLookToRead *p);
-+
-+typedef struct
-+{
-+  ISeqInStream s;
-+  ILookInStream *realStream;
-+} CSecToLook;
-+
-+void SecToLook_CreateVTable(CSecToLook *p);
-+
-+typedef struct
-+{
-+  ISeqInStream s;
-+  ILookInStream *realStream;
-+} CSecToRead;
-+
-+void SecToRead_CreateVTable(CSecToRead *p);
-+
-+typedef struct
-+{
-+  SRes (*Progress)(void *p, UInt64 inSize, UInt64 outSize);
-+    /* Returns: result. (result != SZ_OK) means break.
-+       Value (UInt64)(Int64)-1 for size means unknown value. */
-+} ICompressProgress;
-+
-+typedef struct
-+{
-+  void *(*Alloc)(void *p, size_t size);
-+  void (*Free)(void *p, void *address); /* address can be 0 */
-+} ISzAlloc;
-+
-+#define IAlloc_Alloc(p, size) (p)->Alloc((p), size)
-+#define IAlloc_Free(p, a) (p)->Free((p), a)
-+
-+EXTERN_C_END
-+
-+#endif
---- a/lib/Kconfig
-+++ b/lib/Kconfig
-@@ -103,6 +103,12 @@ config LZO_COMPRESS
- config LZO_DECOMPRESS
- 	tristate
- 
-+config LZMA_COMPRESS
-+    tristate
-+
-+config LZMA_DECOMPRESS
-+    tristate
-+
- #
- # These all provide a common interface (hence the apparent duplication with
- # ZLIB_INFLATE; DECOMPRESS_GZIP is just a wrapper.)
---- a/lib/Makefile
-+++ b/lib/Makefile
-@@ -2,6 +2,16 @@
- # Makefile for some libs needed in the kernel.
- #
- 
-+ifdef CONFIG_JFFS2_ZLIB
-+	CONFIG_ZLIB_INFLATE:=y
-+	CONFIG_ZLIB_DEFLATE:=y
-+endif
-+
-+ifdef CONFIG_JFFS2_LZMA
-+	CONFIG_LZMA_DECOMPRESS:=y
-+	CONFIG_LZMA_COMPRESS:=y
-+endif
-+
- ifdef CONFIG_FUNCTION_TRACER
- ORIG_CFLAGS := $(KBUILD_CFLAGS)
- KBUILD_CFLAGS = $(subst -pg,,$(ORIG_CFLAGS))
-@@ -66,6 +76,8 @@ obj-$(CONFIG_ZLIB_DEFLATE) += zlib_defla
- obj-$(CONFIG_REED_SOLOMON) += reed_solomon/
- obj-$(CONFIG_LZO_COMPRESS) += lzo/
- obj-$(CONFIG_LZO_DECOMPRESS) += lzo/
-+obj-$(CONFIG_LZMA_COMPRESS) += lzma/
-+obj-$(CONFIG_LZMA_DECOMPRESS) += lzma/
- 
- lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o
- lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o
---- /dev/null
-+++ b/lib/lzma/LzFind.c
-@@ -0,0 +1,761 @@
-+/* LzFind.c -- Match finder for LZ algorithms
-+2009-04-22 : Igor Pavlov : Public domain */
-+
-+#include <string.h>
-+
-+#include "LzFind.h"
-+#include "LzHash.h"
-+
-+#define kEmptyHashValue 0
-+#define kMaxValForNormalize ((UInt32)0xFFFFFFFF)
-+#define kNormalizeStepMin (1 << 10) /* it must be power of 2 */
-+#define kNormalizeMask (~(kNormalizeStepMin - 1))
-+#define kMaxHistorySize ((UInt32)3 << 30)
-+
-+#define kStartMaxLen 3
-+
-+static void LzInWindow_Free(CMatchFinder *p, ISzAlloc *alloc)
-+{
-+  if (!p->directInput)
-+  {
-+    alloc->Free(alloc, p->bufferBase);
-+    p->bufferBase = 0;
-+  }
-+}
-+
-+/* keepSizeBefore + keepSizeAfter + keepSizeReserv must be < 4G) */
-+
-+static int LzInWindow_Create(CMatchFinder *p, UInt32 keepSizeReserv, ISzAlloc *alloc)
-+{
-+  UInt32 blockSize = p->keepSizeBefore + p->keepSizeAfter + keepSizeReserv;
-+  if (p->directInput)
-+  {
-+    p->blockSize = blockSize;
-+    return 1;
-+  }
-+  if (p->bufferBase == 0 || p->blockSize != blockSize)
-+  {
-+    LzInWindow_Free(p, alloc);
-+    p->blockSize = blockSize;
-+    p->bufferBase = (Byte *)alloc->Alloc(alloc, (size_t)blockSize);
-+  }
-+  return (p->bufferBase != 0);
-+}
-+
-+Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p) { return p->buffer; }
-+Byte MatchFinder_GetIndexByte(CMatchFinder *p, Int32 index) { return p->buffer[index]; }
-+
-+UInt32 MatchFinder_GetNumAvailableBytes(CMatchFinder *p) { return p->streamPos - p->pos; }
-+
-+void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue)
-+{
-+  p->posLimit -= subValue;
-+  p->pos -= subValue;
-+  p->streamPos -= subValue;
-+}
-+
-+static void MatchFinder_ReadBlock(CMatchFinder *p)
-+{
-+  if (p->streamEndWasReached || p->result != SZ_OK)
-+    return;
-+  if (p->directInput)
-+  {
-+    UInt32 curSize = 0xFFFFFFFF - p->streamPos;
-+    if (curSize > p->directInputRem)
-+      curSize = (UInt32)p->directInputRem;
-+    p->directInputRem -= curSize;
-+    p->streamPos += curSize;
-+    if (p->directInputRem == 0)
-+      p->streamEndWasReached = 1;
-+    return;
-+  }
-+  for (;;)
-+  {
-+    Byte *dest = p->buffer + (p->streamPos - p->pos);
-+    size_t size = (p->bufferBase + p->blockSize - dest);
-+    if (size == 0)
-+      return;
-+    p->result = p->stream->Read(p->stream, dest, &size);
-+    if (p->result != SZ_OK)
-+      return;
-+    if (size == 0)
-+    {
-+      p->streamEndWasReached = 1;
-+      return;
-+    }
-+    p->streamPos += (UInt32)size;
-+    if (p->streamPos - p->pos > p->keepSizeAfter)
-+      return;
-+  }
-+}
-+
-+void MatchFinder_MoveBlock(CMatchFinder *p)
-+{
-+  memmove(p->bufferBase,
-+    p->buffer - p->keepSizeBefore,
-+    (size_t)(p->streamPos - p->pos + p->keepSizeBefore));
-+  p->buffer = p->bufferBase + p->keepSizeBefore;
-+}
-+
-+int MatchFinder_NeedMove(CMatchFinder *p)
-+{
-+  if (p->directInput)
-+    return 0;
-+  /* if (p->streamEndWasReached) return 0; */
-+  return ((size_t)(p->bufferBase + p->blockSize - p->buffer) <= p->keepSizeAfter);
-+}
-+
-+void MatchFinder_ReadIfRequired(CMatchFinder *p)
-+{
-+  if (p->streamEndWasReached)
-+    return;
-+  if (p->keepSizeAfter >= p->streamPos - p->pos)
-+    MatchFinder_ReadBlock(p);
-+}
-+
-+static void MatchFinder_CheckAndMoveAndRead(CMatchFinder *p)
-+{
-+  if (MatchFinder_NeedMove(p))
-+    MatchFinder_MoveBlock(p);
-+  MatchFinder_ReadBlock(p);
-+}
-+
-+static void MatchFinder_SetDefaultSettings(CMatchFinder *p)
-+{
-+  p->cutValue = 32;
-+  p->btMode = 1;
-+  p->numHashBytes = 4;
-+  p->bigHash = 0;
-+}
-+
-+#define kCrcPoly 0xEDB88320
-+
-+void MatchFinder_Construct(CMatchFinder *p)
-+{
-+  UInt32 i;
-+  p->bufferBase = 0;
-+  p->directInput = 0;
-+  p->hash = 0;
-+  MatchFinder_SetDefaultSettings(p);
-+
-+  for (i = 0; i < 256; i++)
-+  {
-+    UInt32 r = i;
-+    int j;
-+    for (j = 0; j < 8; j++)
-+      r = (r >> 1) ^ (kCrcPoly & ~((r & 1) - 1));
-+    p->crc[i] = r;
-+  }
-+}
-+
-+static void MatchFinder_FreeThisClassMemory(CMatchFinder *p, ISzAlloc *alloc)
-+{
-+  alloc->Free(alloc, p->hash);
-+  p->hash = 0;
-+}
-+
-+void MatchFinder_Free(CMatchFinder *p, ISzAlloc *alloc)
-+{
-+  MatchFinder_FreeThisClassMemory(p, alloc);
-+  LzInWindow_Free(p, alloc);
-+}
-+
-+static CLzRef* AllocRefs(UInt32 num, ISzAlloc *alloc)
-+{
-+  size_t sizeInBytes = (size_t)num * sizeof(CLzRef);
-+  if (sizeInBytes / sizeof(CLzRef) != num)
-+    return 0;
-+  return (CLzRef *)alloc->Alloc(alloc, sizeInBytes);
-+}
-+
-+int MatchFinder_Create(CMatchFinder *p, UInt32 historySize,
-+    UInt32 keepAddBufferBefore, UInt32 matchMaxLen, UInt32 keepAddBufferAfter,
-+    ISzAlloc *alloc)
-+{
-+  UInt32 sizeReserv;
-+  if (historySize > kMaxHistorySize)
-+  {
-+    MatchFinder_Free(p, alloc);
-+    return 0;
-+  }
-+  sizeReserv = historySize >> 1;
-+  if (historySize > ((UInt32)2 << 30))
-+    sizeReserv = historySize >> 2;
-+  sizeReserv += (keepAddBufferBefore + matchMaxLen + keepAddBufferAfter) / 2 + (1 << 19);
-+
-+  p->keepSizeBefore = historySize + keepAddBufferBefore + 1;
-+  p->keepSizeAfter = matchMaxLen + keepAddBufferAfter;
-+  /* we need one additional byte, since we use MoveBlock after pos++ and before dictionary using */
-+  if (LzInWindow_Create(p, sizeReserv, alloc))
-+  {
-+    UInt32 newCyclicBufferSize = historySize + 1;
-+    UInt32 hs;
-+    p->matchMaxLen = matchMaxLen;
-+    {
-+      p->fixedHashSize = 0;
-+      if (p->numHashBytes == 2)
-+        hs = (1 << 16) - 1;
-+      else
-+      {
-+        hs = historySize - 1;
-+        hs |= (hs >> 1);
-+        hs |= (hs >> 2);
-+        hs |= (hs >> 4);
-+        hs |= (hs >> 8);
-+        hs >>= 1;
-+        hs |= 0xFFFF; /* don't change it! It's required for Deflate */
-+        if (hs > (1 << 24))
-+        {
-+          if (p->numHashBytes == 3)
-+            hs = (1 << 24) - 1;
-+          else
-+            hs >>= 1;
-+        }
-+      }
-+      p->hashMask = hs;
-+      hs++;
-+      if (p->numHashBytes > 2) p->fixedHashSize += kHash2Size;
-+      if (p->numHashBytes > 3) p->fixedHashSize += kHash3Size;
-+      if (p->numHashBytes > 4) p->fixedHashSize += kHash4Size;
-+      hs += p->fixedHashSize;
-+    }
-+
-+    {
-+      UInt32 prevSize = p->hashSizeSum + p->numSons;
-+      UInt32 newSize;
-+      p->historySize = historySize;
-+      p->hashSizeSum = hs;
-+      p->cyclicBufferSize = newCyclicBufferSize;
-+      p->numSons = (p->btMode ? newCyclicBufferSize * 2 : newCyclicBufferSize);
-+      newSize = p->hashSizeSum + p->numSons;
-+      if (p->hash != 0 && prevSize == newSize)
-+        return 1;
-+      MatchFinder_FreeThisClassMemory(p, alloc);
-+      p->hash = AllocRefs(newSize, alloc);
-+      if (p->hash != 0)
-+      {
-+        p->son = p->hash + p->hashSizeSum;
-+        return 1;
-+      }
-+    }
-+  }
-+  MatchFinder_Free(p, alloc);
-+  return 0;
-+}
-+
-+static void MatchFinder_SetLimits(CMatchFinder *p)
-+{
-+  UInt32 limit = kMaxValForNormalize - p->pos;
-+  UInt32 limit2 = p->cyclicBufferSize - p->cyclicBufferPos;
-+  if (limit2 < limit)
-+    limit = limit2;
-+  limit2 = p->streamPos - p->pos;
-+  if (limit2 <= p->keepSizeAfter)
-+  {
-+    if (limit2 > 0)
-+      limit2 = 1;
-+  }
-+  else
-+    limit2 -= p->keepSizeAfter;
-+  if (limit2 < limit)
-+    limit = limit2;
-+  {
-+    UInt32 lenLimit = p->streamPos - p->pos;
-+    if (lenLimit > p->matchMaxLen)
-+      lenLimit = p->matchMaxLen;
-+    p->lenLimit = lenLimit;
-+  }
-+  p->posLimit = p->pos + limit;
-+}
-+
-+void MatchFinder_Init(CMatchFinder *p)
-+{
-+  UInt32 i;
-+  for (i = 0; i < p->hashSizeSum; i++)
-+    p->hash[i] = kEmptyHashValue;
-+  p->cyclicBufferPos = 0;
-+  p->buffer = p->bufferBase;
-+  p->pos = p->streamPos = p->cyclicBufferSize;
-+  p->result = SZ_OK;
-+  p->streamEndWasReached = 0;
-+  MatchFinder_ReadBlock(p);
-+  MatchFinder_SetLimits(p);
-+}
-+
-+static UInt32 MatchFinder_GetSubValue(CMatchFinder *p)
-+{
-+  return (p->pos - p->historySize - 1) & kNormalizeMask;
-+}
-+
-+void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems)
-+{
-+  UInt32 i;
-+  for (i = 0; i < numItems; i++)
-+  {
-+    UInt32 value = items[i];
-+    if (value <= subValue)
-+      value = kEmptyHashValue;
-+    else
-+      value -= subValue;
-+    items[i] = value;
-+  }
-+}
-+
-+static void MatchFinder_Normalize(CMatchFinder *p)
-+{
-+  UInt32 subValue = MatchFinder_GetSubValue(p);
-+  MatchFinder_Normalize3(subValue, p->hash, p->hashSizeSum + p->numSons);
-+  MatchFinder_ReduceOffsets(p, subValue);
-+}
-+
-+static void MatchFinder_CheckLimits(CMatchFinder *p)
-+{
-+  if (p->pos == kMaxValForNormalize)
-+    MatchFinder_Normalize(p);
-+  if (!p->streamEndWasReached && p->keepSizeAfter == p->streamPos - p->pos)
-+    MatchFinder_CheckAndMoveAndRead(p);
-+  if (p->cyclicBufferPos == p->cyclicBufferSize)
-+    p->cyclicBufferPos = 0;
-+  MatchFinder_SetLimits(p);
-+}
-+
-+static UInt32 * Hc_GetMatchesSpec(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
-+    UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue,
-+    UInt32 *distances, UInt32 maxLen)
-+{
-+  son[_cyclicBufferPos] = curMatch;
-+  for (;;)
-+  {
-+    UInt32 delta = pos - curMatch;
-+    if (cutValue-- == 0 || delta >= _cyclicBufferSize)
-+      return distances;
-+    {
-+      const Byte *pb = cur - delta;
-+      curMatch = son[_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)];
-+      if (pb[maxLen] == cur[maxLen] && *pb == *cur)
-+      {
-+        UInt32 len = 0;
-+        while (++len != lenLimit)
-+          if (pb[len] != cur[len])
-+            break;
-+        if (maxLen < len)
-+        {
-+          *distances++ = maxLen = len;
-+          *distances++ = delta - 1;
-+          if (len == lenLimit)
-+            return distances;
-+        }
-+      }
-+    }
-+  }
-+}
-+
-+UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
-+    UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue,
-+    UInt32 *distances, UInt32 maxLen)
-+{
-+  CLzRef *ptr0 = son + (_cyclicBufferPos << 1) + 1;
-+  CLzRef *ptr1 = son + (_cyclicBufferPos << 1);
-+  UInt32 len0 = 0, len1 = 0;
-+  for (;;)
-+  {
-+    UInt32 delta = pos - curMatch;
-+    if (cutValue-- == 0 || delta >= _cyclicBufferSize)
-+    {
-+      *ptr0 = *ptr1 = kEmptyHashValue;
-+      return distances;
-+    }
-+    {
-+      CLzRef *pair = son + ((_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)) << 1);
-+      const Byte *pb = cur - delta;
-+      UInt32 len = (len0 < len1 ? len0 : len1);
-+      if (pb[len] == cur[len])
-+      {
-+        if (++len != lenLimit && pb[len] == cur[len])
-+          while (++len != lenLimit)
-+            if (pb[len] != cur[len])
-+              break;
-+        if (maxLen < len)
-+        {
-+          *distances++ = maxLen = len;
-+          *distances++ = delta - 1;
-+          if (len == lenLimit)
-+          {
-+            *ptr1 = pair[0];
-+            *ptr0 = pair[1];
-+            return distances;
-+          }
-+        }
-+      }
-+      if (pb[len] < cur[len])
-+      {
-+        *ptr1 = curMatch;
-+        ptr1 = pair + 1;
-+        curMatch = *ptr1;
-+        len1 = len;
-+      }
-+      else
-+      {
-+        *ptr0 = curMatch;
-+        ptr0 = pair;
-+        curMatch = *ptr0;
-+        len0 = len;
-+      }
-+    }
-+  }
-+}
-+
-+static void SkipMatchesSpec(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
-+    UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue)
-+{
-+  CLzRef *ptr0 = son + (_cyclicBufferPos << 1) + 1;
-+  CLzRef *ptr1 = son + (_cyclicBufferPos << 1);
-+  UInt32 len0 = 0, len1 = 0;
-+  for (;;)
-+  {
-+    UInt32 delta = pos - curMatch;
-+    if (cutValue-- == 0 || delta >= _cyclicBufferSize)
-+    {
-+      *ptr0 = *ptr1 = kEmptyHashValue;
-+      return;
-+    }
-+    {
-+      CLzRef *pair = son + ((_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)) << 1);
-+      const Byte *pb = cur - delta;
-+      UInt32 len = (len0 < len1 ? len0 : len1);
-+      if (pb[len] == cur[len])
-+      {
-+        while (++len != lenLimit)
-+          if (pb[len] != cur[len])
-+            break;
-+        {
-+          if (len == lenLimit)
-+          {
-+            *ptr1 = pair[0];
-+            *ptr0 = pair[1];
-+            return;
-+          }
-+        }
-+      }
-+      if (pb[len] < cur[len])
-+      {
-+        *ptr1 = curMatch;
-+        ptr1 = pair + 1;
-+        curMatch = *ptr1;
-+        len1 = len;
-+      }
-+      else
-+      {
-+        *ptr0 = curMatch;
-+        ptr0 = pair;
-+        curMatch = *ptr0;
-+        len0 = len;
-+      }
-+    }
-+  }
-+}
-+
-+#define MOVE_POS \
-+  ++p->cyclicBufferPos; \
-+  p->buffer++; \
-+  if (++p->pos == p->posLimit) MatchFinder_CheckLimits(p);
-+
-+#define MOVE_POS_RET MOVE_POS return offset;
-+
-+static void MatchFinder_MovePos(CMatchFinder *p) { MOVE_POS; }
-+
-+#define GET_MATCHES_HEADER2(minLen, ret_op) \
-+  UInt32 lenLimit; UInt32 hashValue; const Byte *cur; UInt32 curMatch; \
-+  lenLimit = p->lenLimit; { if (lenLimit < minLen) { MatchFinder_MovePos(p); ret_op; }} \
-+  cur = p->buffer;
-+
-+#define GET_MATCHES_HEADER(minLen) GET_MATCHES_HEADER2(minLen, return 0)
-+#define SKIP_HEADER(minLen)        GET_MATCHES_HEADER2(minLen, continue)
-+
-+#define MF_PARAMS(p) p->pos, p->buffer, p->son, p->cyclicBufferPos, p->cyclicBufferSize, p->cutValue
-+
-+#define GET_MATCHES_FOOTER(offset, maxLen) \
-+  offset = (UInt32)(GetMatchesSpec1(lenLimit, curMatch, MF_PARAMS(p), \
-+  distances + offset, maxLen) - distances); MOVE_POS_RET;
-+
-+#define SKIP_FOOTER \
-+  SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p)); MOVE_POS;
-+
-+static UInt32 Bt2_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
-+{
-+  UInt32 offset;
-+  GET_MATCHES_HEADER(2)
-+  HASH2_CALC;
-+  curMatch = p->hash[hashValue];
-+  p->hash[hashValue] = p->pos;
-+  offset = 0;
-+  GET_MATCHES_FOOTER(offset, 1)
-+}
-+
-+UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
-+{
-+  UInt32 offset;
-+  GET_MATCHES_HEADER(3)
-+  HASH_ZIP_CALC;
-+  curMatch = p->hash[hashValue];
-+  p->hash[hashValue] = p->pos;
-+  offset = 0;
-+  GET_MATCHES_FOOTER(offset, 2)
-+}
-+
-+static UInt32 Bt3_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
-+{
-+  UInt32 hash2Value, delta2, maxLen, offset;
-+  GET_MATCHES_HEADER(3)
-+
-+  HASH3_CALC;
-+
-+  delta2 = p->pos - p->hash[hash2Value];
-+  curMatch = p->hash[kFix3HashSize + hashValue];
-+  
-+  p->hash[hash2Value] =
-+  p->hash[kFix3HashSize + hashValue] = p->pos;
-+
-+
-+  maxLen = 2;
-+  offset = 0;
-+  if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
-+  {
-+    for (; maxLen != lenLimit; maxLen++)
-+      if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
-+        break;
-+    distances[0] = maxLen;
-+    distances[1] = delta2 - 1;
-+    offset = 2;
-+    if (maxLen == lenLimit)
-+    {
-+      SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p));
-+      MOVE_POS_RET;
-+    }
-+  }
-+  GET_MATCHES_FOOTER(offset, maxLen)
-+}
-+
-+static UInt32 Bt4_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
-+{
-+  UInt32 hash2Value, hash3Value, delta2, delta3, maxLen, offset;
-+  GET_MATCHES_HEADER(4)
-+
-+  HASH4_CALC;
-+
-+  delta2 = p->pos - p->hash[                hash2Value];
-+  delta3 = p->pos - p->hash[kFix3HashSize + hash3Value];
-+  curMatch = p->hash[kFix4HashSize + hashValue];
-+  
-+  p->hash[                hash2Value] =
-+  p->hash[kFix3HashSize + hash3Value] =
-+  p->hash[kFix4HashSize + hashValue] = p->pos;
-+
-+  maxLen = 1;
-+  offset = 0;
-+  if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
-+  {
-+    distances[0] = maxLen = 2;
-+    distances[1] = delta2 - 1;
-+    offset = 2;
-+  }
-+  if (delta2 != delta3 && delta3 < p->cyclicBufferSize && *(cur - delta3) == *cur)
-+  {
-+    maxLen = 3;
-+    distances[offset + 1] = delta3 - 1;
-+    offset += 2;
-+    delta2 = delta3;
-+  }
-+  if (offset != 0)
-+  {
-+    for (; maxLen != lenLimit; maxLen++)
-+      if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
-+        break;
-+    distances[offset - 2] = maxLen;
-+    if (maxLen == lenLimit)
-+    {
-+      SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p));
-+      MOVE_POS_RET;
-+    }
-+  }
-+  if (maxLen < 3)
-+    maxLen = 3;
-+  GET_MATCHES_FOOTER(offset, maxLen)
-+}
-+
-+static UInt32 Hc4_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
-+{
-+  UInt32 hash2Value, hash3Value, delta2, delta3, maxLen, offset;
-+  GET_MATCHES_HEADER(4)
-+
-+  HASH4_CALC;
-+
-+  delta2 = p->pos - p->hash[                hash2Value];
-+  delta3 = p->pos - p->hash[kFix3HashSize + hash3Value];
-+  curMatch = p->hash[kFix4HashSize + hashValue];
-+
-+  p->hash[                hash2Value] =
-+  p->hash[kFix3HashSize + hash3Value] =
-+  p->hash[kFix4HashSize + hashValue] = p->pos;
-+
-+  maxLen = 1;
-+  offset = 0;
-+  if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
-+  {
-+    distances[0] = maxLen = 2;
-+    distances[1] = delta2 - 1;
-+    offset = 2;
-+  }
-+  if (delta2 != delta3 && delta3 < p->cyclicBufferSize && *(cur - delta3) == *cur)
-+  {
-+    maxLen = 3;
-+    distances[offset + 1] = delta3 - 1;
-+    offset += 2;
-+    delta2 = delta3;
-+  }
-+  if (offset != 0)
-+  {
-+    for (; maxLen != lenLimit; maxLen++)
-+      if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
-+        break;
-+    distances[offset - 2] = maxLen;
-+    if (maxLen == lenLimit)
-+    {
-+      p->son[p->cyclicBufferPos] = curMatch;
-+      MOVE_POS_RET;
-+    }
-+  }
-+  if (maxLen < 3)
-+    maxLen = 3;
-+  offset = (UInt32)(Hc_GetMatchesSpec(lenLimit, curMatch, MF_PARAMS(p),
-+    distances + offset, maxLen) - (distances));
-+  MOVE_POS_RET
-+}
-+
-+UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
-+{
-+  UInt32 offset;
-+  GET_MATCHES_HEADER(3)
-+  HASH_ZIP_CALC;
-+  curMatch = p->hash[hashValue];
-+  p->hash[hashValue] = p->pos;
-+  offset = (UInt32)(Hc_GetMatchesSpec(lenLimit, curMatch, MF_PARAMS(p),
-+    distances, 2) - (distances));
-+  MOVE_POS_RET
-+}
-+
-+static void Bt2_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
-+{
-+  do
-+  {
-+    SKIP_HEADER(2)
-+    HASH2_CALC;
-+    curMatch = p->hash[hashValue];
-+    p->hash[hashValue] = p->pos;
-+    SKIP_FOOTER
-+  }
-+  while (--num != 0);
-+}
-+
-+void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
-+{
-+  do
-+  {
-+    SKIP_HEADER(3)
-+    HASH_ZIP_CALC;
-+    curMatch = p->hash[hashValue];
-+    p->hash[hashValue] = p->pos;
-+    SKIP_FOOTER
-+  }
-+  while (--num != 0);
-+}
-+
-+static void Bt3_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
-+{
-+  do
-+  {
-+    UInt32 hash2Value;
-+    SKIP_HEADER(3)
-+    HASH3_CALC;
-+    curMatch = p->hash[kFix3HashSize + hashValue];
-+    p->hash[hash2Value] =
-+    p->hash[kFix3HashSize + hashValue] = p->pos;
-+    SKIP_FOOTER
-+  }
-+  while (--num != 0);
-+}
-+
-+static void Bt4_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
-+{
-+  do
-+  {
-+    UInt32 hash2Value, hash3Value;
-+    SKIP_HEADER(4)
-+    HASH4_CALC;
-+    curMatch = p->hash[kFix4HashSize + hashValue];
-+    p->hash[                hash2Value] =
-+    p->hash[kFix3HashSize + hash3Value] = p->pos;
-+    p->hash[kFix4HashSize + hashValue] = p->pos;
-+    SKIP_FOOTER
-+  }
-+  while (--num != 0);
-+}
-+
-+static void Hc4_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
-+{
-+  do
-+  {
-+    UInt32 hash2Value, hash3Value;
-+    SKIP_HEADER(4)
-+    HASH4_CALC;
-+    curMatch = p->hash[kFix4HashSize + hashValue];
-+    p->hash[                hash2Value] =
-+    p->hash[kFix3HashSize + hash3Value] =
-+    p->hash[kFix4HashSize + hashValue] = p->pos;
-+    p->son[p->cyclicBufferPos] = curMatch;
-+    MOVE_POS
-+  }
-+  while (--num != 0);
-+}
-+
-+void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
-+{
-+  do
-+  {
-+    SKIP_HEADER(3)
-+    HASH_ZIP_CALC;
-+    curMatch = p->hash[hashValue];
-+    p->hash[hashValue] = p->pos;
-+    p->son[p->cyclicBufferPos] = curMatch;
-+    MOVE_POS
-+  }
-+  while (--num != 0);
-+}
-+
-+void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable)
-+{
-+  vTable->Init = (Mf_Init_Func)MatchFinder_Init;
-+  vTable->GetIndexByte = (Mf_GetIndexByte_Func)MatchFinder_GetIndexByte;
-+  vTable->GetNumAvailableBytes = (Mf_GetNumAvailableBytes_Func)MatchFinder_GetNumAvailableBytes;
-+  vTable->GetPointerToCurrentPos = (Mf_GetPointerToCurrentPos_Func)MatchFinder_GetPointerToCurrentPos;
-+  if (!p->btMode)
-+  {
-+    vTable->GetMatches = (Mf_GetMatches_Func)Hc4_MatchFinder_GetMatches;
-+    vTable->Skip = (Mf_Skip_Func)Hc4_MatchFinder_Skip;
-+  }
-+  else if (p->numHashBytes == 2)
-+  {
-+    vTable->GetMatches = (Mf_GetMatches_Func)Bt2_MatchFinder_GetMatches;
-+    vTable->Skip = (Mf_Skip_Func)Bt2_MatchFinder_Skip;
-+  }
-+  else if (p->numHashBytes == 3)
-+  {
-+    vTable->GetMatches = (Mf_GetMatches_Func)Bt3_MatchFinder_GetMatches;
-+    vTable->Skip = (Mf_Skip_Func)Bt3_MatchFinder_Skip;
-+  }
-+  else
-+  {
-+    vTable->GetMatches = (Mf_GetMatches_Func)Bt4_MatchFinder_GetMatches;
-+    vTable->Skip = (Mf_Skip_Func)Bt4_MatchFinder_Skip;
-+  }
-+}
---- /dev/null
-+++ b/lib/lzma/LzmaDec.c
-@@ -0,0 +1,999 @@
-+/* LzmaDec.c -- LZMA Decoder
-+2009-09-20 : Igor Pavlov : Public domain */
-+
-+#include "LzmaDec.h"
-+
-+#include <string.h>
-+
-+#define kNumTopBits 24
-+#define kTopValue ((UInt32)1 << kNumTopBits)
-+
-+#define kNumBitModelTotalBits 11
-+#define kBitModelTotal (1 << kNumBitModelTotalBits)
-+#define kNumMoveBits 5
-+
-+#define RC_INIT_SIZE 5
-+
-+#define NORMALIZE if (range < kTopValue) { range <<= 8; code = (code << 8) | (*buf++); }
-+
-+#define IF_BIT_0(p) ttt = *(p); NORMALIZE; bound = (range >> kNumBitModelTotalBits) * ttt; if (code < bound)
-+#define UPDATE_0(p) range = bound; *(p) = (CLzmaProb)(ttt + ((kBitModelTotal - ttt) >> kNumMoveBits));
-+#define UPDATE_1(p) range -= bound; code -= bound; *(p) = (CLzmaProb)(ttt - (ttt >> kNumMoveBits));
-+#define GET_BIT2(p, i, A0, A1) IF_BIT_0(p) \
-+  { UPDATE_0(p); i = (i + i); A0; } else \
-+  { UPDATE_1(p); i = (i + i) + 1; A1; }
-+#define GET_BIT(p, i) GET_BIT2(p, i, ; , ;)
-+
-+#define TREE_GET_BIT(probs, i) { GET_BIT((probs + i), i); }
-+#define TREE_DECODE(probs, limit, i) \
-+  { i = 1; do { TREE_GET_BIT(probs, i); } while (i < limit); i -= limit; }
-+
-+/* #define _LZMA_SIZE_OPT */
-+
-+#ifdef _LZMA_SIZE_OPT
-+#define TREE_6_DECODE(probs, i) TREE_DECODE(probs, (1 << 6), i)
-+#else
-+#define TREE_6_DECODE(probs, i) \
-+  { i = 1; \
-+  TREE_GET_BIT(probs, i); \
-+  TREE_GET_BIT(probs, i); \
-+  TREE_GET_BIT(probs, i); \
-+  TREE_GET_BIT(probs, i); \
-+  TREE_GET_BIT(probs, i); \
-+  TREE_GET_BIT(probs, i); \
-+  i -= 0x40; }
-+#endif
-+
-+#define NORMALIZE_CHECK if (range < kTopValue) { if (buf >= bufLimit) return DUMMY_ERROR; range <<= 8; code = (code << 8) | (*buf++); }
-+
-+#define IF_BIT_0_CHECK(p) ttt = *(p); NORMALIZE_CHECK; bound = (range >> kNumBitModelTotalBits) * ttt; if (code < bound)
-+#define UPDATE_0_CHECK range = bound;
-+#define UPDATE_1_CHECK range -= bound; code -= bound;
-+#define GET_BIT2_CHECK(p, i, A0, A1) IF_BIT_0_CHECK(p) \
-+  { UPDATE_0_CHECK; i = (i + i); A0; } else \
-+  { UPDATE_1_CHECK; i = (i + i) + 1; A1; }
-+#define GET_BIT_CHECK(p, i) GET_BIT2_CHECK(p, i, ; , ;)
-+#define TREE_DECODE_CHECK(probs, limit, i) \
-+  { i = 1; do { GET_BIT_CHECK(probs + i, i) } while (i < limit); i -= limit; }
-+
-+
-+#define kNumPosBitsMax 4
-+#define kNumPosStatesMax (1 << kNumPosBitsMax)
-+
-+#define kLenNumLowBits 3
-+#define kLenNumLowSymbols (1 << kLenNumLowBits)
-+#define kLenNumMidBits 3
-+#define kLenNumMidSymbols (1 << kLenNumMidBits)
-+#define kLenNumHighBits 8
-+#define kLenNumHighSymbols (1 << kLenNumHighBits)
-+
-+#define LenChoice 0
-+#define LenChoice2 (LenChoice + 1)
-+#define LenLow (LenChoice2 + 1)
-+#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
-+#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
-+#define kNumLenProbs (LenHigh + kLenNumHighSymbols)
-+
-+
-+#define kNumStates 12
-+#define kNumLitStates 7
-+
-+#define kStartPosModelIndex 4
-+#define kEndPosModelIndex 14
-+#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
-+
-+#define kNumPosSlotBits 6
-+#define kNumLenToPosStates 4
-+
-+#define kNumAlignBits 4
-+#define kAlignTableSize (1 << kNumAlignBits)
-+
-+#define kMatchMinLen 2
-+#define kMatchSpecLenStart (kMatchMinLen + kLenNumLowSymbols + kLenNumMidSymbols + kLenNumHighSymbols)
-+
-+#define IsMatch 0
-+#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
-+#define IsRepG0 (IsRep + kNumStates)
-+#define IsRepG1 (IsRepG0 + kNumStates)
-+#define IsRepG2 (IsRepG1 + kNumStates)
-+#define IsRep0Long (IsRepG2 + kNumStates)
-+#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
-+#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
-+#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
-+#define LenCoder (Align + kAlignTableSize)
-+#define RepLenCoder (LenCoder + kNumLenProbs)
-+#define Literal (RepLenCoder + kNumLenProbs)
-+
-+#define LZMA_BASE_SIZE 1846
-+#define LZMA_LIT_SIZE 768
-+
-+#define LzmaProps_GetNumProbs(p) ((UInt32)LZMA_BASE_SIZE + (LZMA_LIT_SIZE << ((p)->lc + (p)->lp)))
-+
-+#if Literal != LZMA_BASE_SIZE
-+StopCompilingDueBUG
-+#endif
-+
-+#define LZMA_DIC_MIN (1 << 12)
-+
-+/* First LZMA-symbol is always decoded.
-+And it decodes new LZMA-symbols while (buf < bufLimit), but "buf" is without last normalization
-+Out:
-+  Result:
-+    SZ_OK - OK
-+    SZ_ERROR_DATA - Error
-+  p->remainLen:
-+    < kMatchSpecLenStart : normal remain
-+    = kMatchSpecLenStart : finished
-+    = kMatchSpecLenStart + 1 : Flush marker
-+    = kMatchSpecLenStart + 2 : State Init Marker
-+*/
-+
-+static int MY_FAST_CALL LzmaDec_DecodeReal(CLzmaDec *p, SizeT limit, const Byte *bufLimit)
-+{
-+  CLzmaProb *probs = p->probs;
-+
-+  unsigned state = p->state;
-+  UInt32 rep0 = p->reps[0], rep1 = p->reps[1], rep2 = p->reps[2], rep3 = p->reps[3];
-+  unsigned pbMask = ((unsigned)1 << (p->prop.pb)) - 1;
-+  unsigned lpMask = ((unsigned)1 << (p->prop.lp)) - 1;
-+  unsigned lc = p->prop.lc;
-+
-+  Byte *dic = p->dic;
-+  SizeT dicBufSize = p->dicBufSize;
-+  SizeT dicPos = p->dicPos;
-+  
-+  UInt32 processedPos = p->processedPos;
-+  UInt32 checkDicSize = p->checkDicSize;
-+  unsigned len = 0;
-+
-+  const Byte *buf = p->buf;
-+  UInt32 range = p->range;
-+  UInt32 code = p->code;
-+
-+  do
-+  {
-+    CLzmaProb *prob;
-+    UInt32 bound;
-+    unsigned ttt;
-+    unsigned posState = processedPos & pbMask;
-+
-+    prob = probs + IsMatch + (state << kNumPosBitsMax) + posState;
-+    IF_BIT_0(prob)
-+    {
-+      unsigned symbol;
-+      UPDATE_0(prob);
-+      prob = probs + Literal;
-+      if (checkDicSize != 0 || processedPos != 0)
-+        prob += (LZMA_LIT_SIZE * (((processedPos & lpMask) << lc) +
-+        (dic[(dicPos == 0 ? dicBufSize : dicPos) - 1] >> (8 - lc))));
-+
-+      if (state < kNumLitStates)
-+      {
-+        state -= (state < 4) ? state : 3;
-+        symbol = 1;
-+        do { GET_BIT(prob + symbol, symbol) } while (symbol < 0x100);
-+      }
-+      else
-+      {
-+        unsigned matchByte = p->dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
-+        unsigned offs = 0x100;
-+        state -= (state < 10) ? 3 : 6;
-+        symbol = 1;
-+        do
-+        {
-+          unsigned bit;
-+          CLzmaProb *probLit;
-+          matchByte <<= 1;
-+          bit = (matchByte & offs);
-+          probLit = prob + offs + bit + symbol;
-+          GET_BIT2(probLit, symbol, offs &= ~bit, offs &= bit)
-+        }
-+        while (symbol < 0x100);
-+      }
-+      dic[dicPos++] = (Byte)symbol;
-+      processedPos++;
-+      continue;
-+    }
-+    else
-+    {
-+      UPDATE_1(prob);
-+      prob = probs + IsRep + state;
-+      IF_BIT_0(prob)
-+      {
-+        UPDATE_0(prob);
-+        state += kNumStates;
-+        prob = probs + LenCoder;
-+      }
-+      else
-+      {
-+        UPDATE_1(prob);
-+        if (checkDicSize == 0 && processedPos == 0)
-+          return SZ_ERROR_DATA;
-+        prob = probs + IsRepG0 + state;
-+        IF_BIT_0(prob)
-+        {
-+          UPDATE_0(prob);
-+          prob = probs + IsRep0Long + (state << kNumPosBitsMax) + posState;
-+          IF_BIT_0(prob)
-+          {
-+            UPDATE_0(prob);
-+            dic[dicPos] = dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
-+            dicPos++;
-+            processedPos++;
-+            state = state < kNumLitStates ? 9 : 11;
-+            continue;
-+          }
-+          UPDATE_1(prob);
-+        }
-+        else
-+        {
-+          UInt32 distance;
-+          UPDATE_1(prob);
-+          prob = probs + IsRepG1 + state;
-+          IF_BIT_0(prob)
-+          {
-+            UPDATE_0(prob);
-+            distance = rep1;
-+          }
-+          else
-+          {
-+            UPDATE_1(prob);
-+            prob = probs + IsRepG2 + state;
-+            IF_BIT_0(prob)
-+            {
-+              UPDATE_0(prob);
-+              distance = rep2;
-+            }
-+            else
-+            {
-+              UPDATE_1(prob);
-+              distance = rep3;
-+              rep3 = rep2;
-+            }
-+            rep2 = rep1;
-+          }
-+          rep1 = rep0;
-+          rep0 = distance;
-+        }
-+        state = state < kNumLitStates ? 8 : 11;
-+        prob = probs + RepLenCoder;
-+      }
-+      {
-+        unsigned limit, offset;
-+        CLzmaProb *probLen = prob + LenChoice;
-+        IF_BIT_0(probLen)
-+        {
-+          UPDATE_0(probLen);
-+          probLen = prob + LenLow + (posState << kLenNumLowBits);
-+          offset = 0;
-+          limit = (1 << kLenNumLowBits);
-+        }
-+        else
-+        {
-+          UPDATE_1(probLen);
-+          probLen = prob + LenChoice2;
-+          IF_BIT_0(probLen)
-+          {
-+            UPDATE_0(probLen);
-+            probLen = prob + LenMid + (posState << kLenNumMidBits);
-+            offset = kLenNumLowSymbols;
-+            limit = (1 << kLenNumMidBits);
-+          }
-+          else
-+          {
-+            UPDATE_1(probLen);
-+            probLen = prob + LenHigh;
-+            offset = kLenNumLowSymbols + kLenNumMidSymbols;
-+            limit = (1 << kLenNumHighBits);
-+          }
-+        }
-+        TREE_DECODE(probLen, limit, len);
-+        len += offset;
-+      }
-+
-+      if (state >= kNumStates)
-+      {
-+        UInt32 distance;
-+        prob = probs + PosSlot +
-+            ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << kNumPosSlotBits);
-+        TREE_6_DECODE(prob, distance);
-+        if (distance >= kStartPosModelIndex)
-+        {
-+          unsigned posSlot = (unsigned)distance;
-+          int numDirectBits = (int)(((distance >> 1) - 1));
-+          distance = (2 | (distance & 1));
-+          if (posSlot < kEndPosModelIndex)
-+          {
-+            distance <<= numDirectBits;
-+            prob = probs + SpecPos + distance - posSlot - 1;
-+            {
-+              UInt32 mask = 1;
-+              unsigned i = 1;
-+              do
-+              {
-+                GET_BIT2(prob + i, i, ; , distance |= mask);
-+                mask <<= 1;
-+              }
-+              while (--numDirectBits != 0);
-+            }
-+          }
-+          else
-+          {
-+            numDirectBits -= kNumAlignBits;
-+            do
-+            {
-+              NORMALIZE
-+              range >>= 1;
-+              
-+              {
-+                UInt32 t;
-+                code -= range;
-+                t = (0 - ((UInt32)code >> 31)); /* (UInt32)((Int32)code >> 31) */
-+                distance = (distance << 1) + (t + 1);
-+                code += range & t;
-+              }
-+              /*
-+              distance <<= 1;
-+              if (code >= range)
-+              {
-+                code -= range;
-+                distance |= 1;
-+              }
-+              */
-+            }
-+            while (--numDirectBits != 0);
-+            prob = probs + Align;
-+            distance <<= kNumAlignBits;
-+            {
-+              unsigned i = 1;
-+              GET_BIT2(prob + i, i, ; , distance |= 1);
-+              GET_BIT2(prob + i, i, ; , distance |= 2);
-+              GET_BIT2(prob + i, i, ; , distance |= 4);
-+              GET_BIT2(prob + i, i, ; , distance |= 8);
-+            }
-+            if (distance == (UInt32)0xFFFFFFFF)
-+            {
-+              len += kMatchSpecLenStart;
-+              state -= kNumStates;
-+              break;
-+            }
-+          }
-+        }
-+        rep3 = rep2;
-+        rep2 = rep1;
-+        rep1 = rep0;
-+        rep0 = distance + 1;
-+        if (checkDicSize == 0)
-+        {
-+          if (distance >= processedPos)
-+            return SZ_ERROR_DATA;
-+        }
-+        else if (distance >= checkDicSize)
-+          return SZ_ERROR_DATA;
-+        state = (state < kNumStates + kNumLitStates) ? kNumLitStates : kNumLitStates + 3;
-+      }
-+
-+      len += kMatchMinLen;
-+
-+      if (limit == dicPos)
-+        return SZ_ERROR_DATA;
-+      {
-+        SizeT rem = limit - dicPos;
-+        unsigned curLen = ((rem < len) ? (unsigned)rem : len);
-+        SizeT pos = (dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0);
-+
-+        processedPos += curLen;
-+
-+        len -= curLen;
-+        if (pos + curLen <= dicBufSize)
-+        {
-+          Byte *dest = dic + dicPos;
-+          ptrdiff_t src = (ptrdiff_t)pos - (ptrdiff_t)dicPos;
-+          const Byte *lim = dest + curLen;
-+          dicPos += curLen;
-+          do
-+            *(dest) = (Byte)*(dest + src);
-+          while (++dest != lim);
-+        }
-+        else
-+        {
-+          do
-+          {
-+            dic[dicPos++] = dic[pos];
-+            if (++pos == dicBufSize)
-+              pos = 0;
-+          }
-+          while (--curLen != 0);
-+        }
-+      }
-+    }
-+  }
-+  while (dicPos < limit && buf < bufLimit);
-+  NORMALIZE;
-+  p->buf = buf;
-+  p->range = range;
-+  p->code = code;
-+  p->remainLen = len;
-+  p->dicPos = dicPos;
-+  p->processedPos = processedPos;
-+  p->reps[0] = rep0;
-+  p->reps[1] = rep1;
-+  p->reps[2] = rep2;
-+  p->reps[3] = rep3;
-+  p->state = state;
-+
-+  return SZ_OK;
-+}
-+
-+static void MY_FAST_CALL LzmaDec_WriteRem(CLzmaDec *p, SizeT limit)
-+{
-+  if (p->remainLen != 0 && p->remainLen < kMatchSpecLenStart)
-+  {
-+    Byte *dic = p->dic;
-+    SizeT dicPos = p->dicPos;
-+    SizeT dicBufSize = p->dicBufSize;
-+    unsigned len = p->remainLen;
-+    UInt32 rep0 = p->reps[0];
-+    if (limit - dicPos < len)
-+      len = (unsigned)(limit - dicPos);
-+
-+    if (p->checkDicSize == 0 && p->prop.dicSize - p->processedPos <= len)
-+      p->checkDicSize = p->prop.dicSize;
-+
-+    p->processedPos += len;
-+    p->remainLen -= len;
-+    while (len-- != 0)
-+    {
-+      dic[dicPos] = dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
-+      dicPos++;
-+    }
-+    p->dicPos = dicPos;
-+  }
-+}
-+
-+static int MY_FAST_CALL LzmaDec_DecodeReal2(CLzmaDec *p, SizeT limit, const Byte *bufLimit)
-+{
-+  do
-+  {
-+    SizeT limit2 = limit;
-+    if (p->checkDicSize == 0)
-+    {
-+      UInt32 rem = p->prop.dicSize - p->processedPos;
-+      if (limit - p->dicPos > rem)
-+        limit2 = p->dicPos + rem;
-+    }
-+    RINOK(LzmaDec_DecodeReal(p, limit2, bufLimit));
-+    if (p->processedPos >= p->prop.dicSize)
-+      p->checkDicSize = p->prop.dicSize;
-+    LzmaDec_WriteRem(p, limit);
-+  }
-+  while (p->dicPos < limit && p->buf < bufLimit && p->remainLen < kMatchSpecLenStart);
-+
-+  if (p->remainLen > kMatchSpecLenStart)
-+  {
-+    p->remainLen = kMatchSpecLenStart;
-+  }
-+  return 0;
-+}
-+
-+typedef enum
-+{
-+  DUMMY_ERROR, /* unexpected end of input stream */
-+  DUMMY_LIT,
-+  DUMMY_MATCH,
-+  DUMMY_REP
-+} ELzmaDummy;
-+
-+static ELzmaDummy LzmaDec_TryDummy(const CLzmaDec *p, const Byte *buf, SizeT inSize)
-+{
-+  UInt32 range = p->range;
-+  UInt32 code = p->code;
-+  const Byte *bufLimit = buf + inSize;
-+  CLzmaProb *probs = p->probs;
-+  unsigned state = p->state;
-+  ELzmaDummy res;
-+
-+  {
-+    CLzmaProb *prob;
-+    UInt32 bound;
-+    unsigned ttt;
-+    unsigned posState = (p->processedPos) & ((1 << p->prop.pb) - 1);
-+
-+    prob = probs + IsMatch + (state << kNumPosBitsMax) + posState;
-+    IF_BIT_0_CHECK(prob)
-+    {
-+      UPDATE_0_CHECK
-+
-+      /* if (bufLimit - buf >= 7) return DUMMY_LIT; */
-+
-+      prob = probs + Literal;
-+      if (p->checkDicSize != 0 || p->processedPos != 0)
-+        prob += (LZMA_LIT_SIZE *
-+          ((((p->processedPos) & ((1 << (p->prop.lp)) - 1)) << p->prop.lc) +
-+          (p->dic[(p->dicPos == 0 ? p->dicBufSize : p->dicPos) - 1] >> (8 - p->prop.lc))));
-+
-+      if (state < kNumLitStates)
-+      {
-+        unsigned symbol = 1;
-+        do { GET_BIT_CHECK(prob + symbol, symbol) } while (symbol < 0x100);
-+      }
-+      else
-+      {
-+        unsigned matchByte = p->dic[p->dicPos - p->reps[0] +
-+            ((p->dicPos < p->reps[0]) ? p->dicBufSize : 0)];
-+        unsigned offs = 0x100;
-+        unsigned symbol = 1;
-+        do
-+        {
-+          unsigned bit;
-+          CLzmaProb *probLit;
-+          matchByte <<= 1;
-+          bit = (matchByte & offs);
-+          probLit = prob + offs + bit + symbol;
-+          GET_BIT2_CHECK(probLit, symbol, offs &= ~bit, offs &= bit)
-+        }
-+        while (symbol < 0x100);
-+      }
-+      res = DUMMY_LIT;
-+    }
-+    else
-+    {
-+      unsigned len;
-+      UPDATE_1_CHECK;
-+
-+      prob = probs + IsRep + state;
-+      IF_BIT_0_CHECK(prob)
-+      {
-+        UPDATE_0_CHECK;
-+        state = 0;
-+        prob = probs + LenCoder;
-+        res = DUMMY_MATCH;
-+      }
-+      else
-+      {
-+        UPDATE_1_CHECK;
-+        res = DUMMY_REP;
-+        prob = probs + IsRepG0 + state;
-+        IF_BIT_0_CHECK(prob)
-+        {
-+          UPDATE_0_CHECK;
-+          prob = probs + IsRep0Long + (state << kNumPosBitsMax) + posState;
-+          IF_BIT_0_CHECK(prob)
-+          {
-+            UPDATE_0_CHECK;
-+            NORMALIZE_CHECK;
-+            return DUMMY_REP;
-+          }
-+          else
-+          {
-+            UPDATE_1_CHECK;
-+          }
-+        }
-+        else
-+        {
-+          UPDATE_1_CHECK;
-+          prob = probs + IsRepG1 + state;
-+          IF_BIT_0_CHECK(prob)
-+          {
-+            UPDATE_0_CHECK;
-+          }
-+          else
-+          {
-+            UPDATE_1_CHECK;
-+            prob = probs + IsRepG2 + state;
-+            IF_BIT_0_CHECK(prob)
-+            {
-+              UPDATE_0_CHECK;
-+            }
-+            else
-+            {
-+              UPDATE_1_CHECK;
-+            }
-+          }
-+        }
-+        state = kNumStates;
-+        prob = probs + RepLenCoder;
-+      }
-+      {
-+        unsigned limit, offset;
-+        CLzmaProb *probLen = prob + LenChoice;
-+        IF_BIT_0_CHECK(probLen)
-+        {
-+          UPDATE_0_CHECK;
-+          probLen = prob + LenLow + (posState << kLenNumLowBits);
-+          offset = 0;
-+          limit = 1 << kLenNumLowBits;
-+        }
-+        else
-+        {
-+          UPDATE_1_CHECK;
-+          probLen = prob + LenChoice2;
-+          IF_BIT_0_CHECK(probLen)
-+          {
-+            UPDATE_0_CHECK;
-+            probLen = prob + LenMid + (posState << kLenNumMidBits);
-+            offset = kLenNumLowSymbols;
-+            limit = 1 << kLenNumMidBits;
-+          }
-+          else
-+          {
-+            UPDATE_1_CHECK;
-+            probLen = prob + LenHigh;
-+            offset = kLenNumLowSymbols + kLenNumMidSymbols;
-+            limit = 1 << kLenNumHighBits;
-+          }
-+        }
-+        TREE_DECODE_CHECK(probLen, limit, len);
-+        len += offset;
-+      }
-+
-+      if (state < 4)
-+      {
-+        unsigned posSlot;
-+        prob = probs + PosSlot +
-+            ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) <<
-+            kNumPosSlotBits);
-+        TREE_DECODE_CHECK(prob, 1 << kNumPosSlotBits, posSlot);
-+        if (posSlot >= kStartPosModelIndex)
-+        {
-+          int numDirectBits = ((posSlot >> 1) - 1);
-+
-+          /* if (bufLimit - buf >= 8) return DUMMY_MATCH; */
-+
-+          if (posSlot < kEndPosModelIndex)
-+          {
-+            prob = probs + SpecPos + ((2 | (posSlot & 1)) << numDirectBits) - posSlot - 1;
-+          }
-+          else
-+          {
-+            numDirectBits -= kNumAlignBits;
-+            do
-+            {
-+              NORMALIZE_CHECK
-+              range >>= 1;
-+              code -= range & (((code - range) >> 31) - 1);
-+              /* if (code >= range) code -= range; */
-+            }
-+            while (--numDirectBits != 0);
-+            prob = probs + Align;
-+            numDirectBits = kNumAlignBits;
-+          }
-+          {
-+            unsigned i = 1;
-+            do
-+            {
-+              GET_BIT_CHECK(prob + i, i);
-+            }
-+            while (--numDirectBits != 0);
-+          }
-+        }
-+      }
-+    }
-+  }
-+  NORMALIZE_CHECK;
-+  return res;
-+}
-+
-+
-+static void LzmaDec_InitRc(CLzmaDec *p, const Byte *data)
-+{
-+  p->code = ((UInt32)data[1] << 24) | ((UInt32)data[2] << 16) | ((UInt32)data[3] << 8) | ((UInt32)data[4]);
-+  p->range = 0xFFFFFFFF;
-+  p->needFlush = 0;
-+}
-+
-+void LzmaDec_InitDicAndState(CLzmaDec *p, Bool initDic, Bool initState)
-+{
-+  p->needFlush = 1;
-+  p->remainLen = 0;
-+  p->tempBufSize = 0;
-+
-+  if (initDic)
-+  {
-+    p->processedPos = 0;
-+    p->checkDicSize = 0;
-+    p->needInitState = 1;
-+  }
-+  if (initState)
-+    p->needInitState = 1;
-+}
-+
-+void LzmaDec_Init(CLzmaDec *p)
-+{
-+  p->dicPos = 0;
-+  LzmaDec_InitDicAndState(p, True, True);
-+}
-+
-+static void LzmaDec_InitStateReal(CLzmaDec *p)
-+{
-+  UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (p->prop.lc + p->prop.lp));
-+  UInt32 i;
-+  CLzmaProb *probs = p->probs;
-+  for (i = 0; i < numProbs; i++)
-+    probs[i] = kBitModelTotal >> 1;
-+  p->reps[0] = p->reps[1] = p->reps[2] = p->reps[3] = 1;
-+  p->state = 0;
-+  p->needInitState = 0;
-+}
-+
-+SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, const Byte *src, SizeT *srcLen,
-+    ELzmaFinishMode finishMode, ELzmaStatus *status)
-+{
-+  SizeT inSize = *srcLen;
-+  (*srcLen) = 0;
-+  LzmaDec_WriteRem(p, dicLimit);
-+  
-+  *status = LZMA_STATUS_NOT_SPECIFIED;
-+
-+  while (p->remainLen != kMatchSpecLenStart)
-+  {
-+      int checkEndMarkNow;
-+
-+      if (p->needFlush != 0)
-+      {
-+        for (; inSize > 0 && p->tempBufSize < RC_INIT_SIZE; (*srcLen)++, inSize--)
-+          p->tempBuf[p->tempBufSize++] = *src++;
-+        if (p->tempBufSize < RC_INIT_SIZE)
-+        {
-+          *status = LZMA_STATUS_NEEDS_MORE_INPUT;
-+          return SZ_OK;
-+        }
-+        if (p->tempBuf[0] != 0)
-+          return SZ_ERROR_DATA;
-+
-+        LzmaDec_InitRc(p, p->tempBuf);
-+        p->tempBufSize = 0;
-+      }
-+
-+      checkEndMarkNow = 0;
-+      if (p->dicPos >= dicLimit)
-+      {
-+        if (p->remainLen == 0 && p->code == 0)
-+        {
-+          *status = LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK;
-+          return SZ_OK;
-+        }
-+        if (finishMode == LZMA_FINISH_ANY)
-+        {
-+          *status = LZMA_STATUS_NOT_FINISHED;
-+          return SZ_OK;
-+        }
-+        if (p->remainLen != 0)
-+        {
-+          *status = LZMA_STATUS_NOT_FINISHED;
-+          return SZ_ERROR_DATA;
-+        }
-+        checkEndMarkNow = 1;
-+      }
-+
-+      if (p->needInitState)
-+        LzmaDec_InitStateReal(p);
-+  
-+      if (p->tempBufSize == 0)
-+      {
-+        SizeT processed;
-+        const Byte *bufLimit;
-+        if (inSize < LZMA_REQUIRED_INPUT_MAX || checkEndMarkNow)
-+        {
-+          int dummyRes = LzmaDec_TryDummy(p, src, inSize);
-+          if (dummyRes == DUMMY_ERROR)
-+          {
-+            memcpy(p->tempBuf, src, inSize);
-+            p->tempBufSize = (unsigned)inSize;
-+            (*srcLen) += inSize;
-+            *status = LZMA_STATUS_NEEDS_MORE_INPUT;
-+            return SZ_OK;
-+          }
-+          if (checkEndMarkNow && dummyRes != DUMMY_MATCH)
-+          {
-+            *status = LZMA_STATUS_NOT_FINISHED;
-+            return SZ_ERROR_DATA;
-+          }
-+          bufLimit = src;
-+        }
-+        else
-+          bufLimit = src + inSize - LZMA_REQUIRED_INPUT_MAX;
-+        p->buf = src;
-+        if (LzmaDec_DecodeReal2(p, dicLimit, bufLimit) != 0)
-+          return SZ_ERROR_DATA;
-+        processed = (SizeT)(p->buf - src);
-+        (*srcLen) += processed;
-+        src += processed;
-+        inSize -= processed;
-+      }
-+      else
-+      {
-+        unsigned rem = p->tempBufSize, lookAhead = 0;
-+        while (rem < LZMA_REQUIRED_INPUT_MAX && lookAhead < inSize)
-+          p->tempBuf[rem++] = src[lookAhead++];
-+        p->tempBufSize = rem;
-+        if (rem < LZMA_REQUIRED_INPUT_MAX || checkEndMarkNow)
-+        {
-+          int dummyRes = LzmaDec_TryDummy(p, p->tempBuf, rem);
-+          if (dummyRes == DUMMY_ERROR)
-+          {
-+            (*srcLen) += lookAhead;
-+            *status = LZMA_STATUS_NEEDS_MORE_INPUT;
-+            return SZ_OK;
-+          }
-+          if (checkEndMarkNow && dummyRes != DUMMY_MATCH)
-+          {
-+            *status = LZMA_STATUS_NOT_FINISHED;
-+            return SZ_ERROR_DATA;
-+          }
-+        }
-+        p->buf = p->tempBuf;
-+        if (LzmaDec_DecodeReal2(p, dicLimit, p->buf) != 0)
-+          return SZ_ERROR_DATA;
-+        lookAhead -= (rem - (unsigned)(p->buf - p->tempBuf));
-+        (*srcLen) += lookAhead;
-+        src += lookAhead;
-+        inSize -= lookAhead;
-+        p->tempBufSize = 0;
-+      }
-+  }
-+  if (p->code == 0)
-+    *status = LZMA_STATUS_FINISHED_WITH_MARK;
-+  return (p->code == 0) ? SZ_OK : SZ_ERROR_DATA;
-+}
-+
-+SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status)
-+{
-+  SizeT outSize = *destLen;
-+  SizeT inSize = *srcLen;
-+  *srcLen = *destLen = 0;
-+  for (;;)
-+  {
-+    SizeT inSizeCur = inSize, outSizeCur, dicPos;
-+    ELzmaFinishMode curFinishMode;
-+    SRes res;
-+    if (p->dicPos == p->dicBufSize)
-+      p->dicPos = 0;
-+    dicPos = p->dicPos;
-+    if (outSize > p->dicBufSize - dicPos)
-+    {
-+      outSizeCur = p->dicBufSize;
-+      curFinishMode = LZMA_FINISH_ANY;
-+    }
-+    else
-+    {
-+      outSizeCur = dicPos + outSize;
-+      curFinishMode = finishMode;
-+    }
-+
-+    res = LzmaDec_DecodeToDic(p, outSizeCur, src, &inSizeCur, curFinishMode, status);
-+    src += inSizeCur;
-+    inSize -= inSizeCur;
-+    *srcLen += inSizeCur;
-+    outSizeCur = p->dicPos - dicPos;
-+    memcpy(dest, p->dic + dicPos, outSizeCur);
-+    dest += outSizeCur;
-+    outSize -= outSizeCur;
-+    *destLen += outSizeCur;
-+    if (res != 0)
-+      return res;
-+    if (outSizeCur == 0 || outSize == 0)
-+      return SZ_OK;
-+  }
-+}
-+
-+void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc)
-+{
-+  alloc->Free(alloc, p->probs);
-+  p->probs = 0;
-+}
-+
-+static void LzmaDec_FreeDict(CLzmaDec *p, ISzAlloc *alloc)
-+{
-+  alloc->Free(alloc, p->dic);
-+  p->dic = 0;
-+}
-+
-+void LzmaDec_Free(CLzmaDec *p, ISzAlloc *alloc)
-+{
-+  LzmaDec_FreeProbs(p, alloc);
-+  LzmaDec_FreeDict(p, alloc);
-+}
-+
-+SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size)
-+{
-+  UInt32 dicSize;
-+  Byte d;
-+  
-+  if (size < LZMA_PROPS_SIZE)
-+    return SZ_ERROR_UNSUPPORTED;
-+  else
-+    dicSize = data[1] | ((UInt32)data[2] << 8) | ((UInt32)data[3] << 16) | ((UInt32)data[4] << 24);
-+ 
-+  if (dicSize < LZMA_DIC_MIN)
-+    dicSize = LZMA_DIC_MIN;
-+  p->dicSize = dicSize;
-+
-+  d = data[0];
-+  if (d >= (9 * 5 * 5))
-+    return SZ_ERROR_UNSUPPORTED;
-+
-+  p->lc = d % 9;
-+  d /= 9;
-+  p->pb = d / 5;
-+  p->lp = d % 5;
-+
-+  return SZ_OK;
-+}
-+
-+static SRes LzmaDec_AllocateProbs2(CLzmaDec *p, const CLzmaProps *propNew, ISzAlloc *alloc)
-+{
-+  UInt32 numProbs = LzmaProps_GetNumProbs(propNew);
-+  if (p->probs == 0 || numProbs != p->numProbs)
-+  {
-+    LzmaDec_FreeProbs(p, alloc);
-+    p->probs = (CLzmaProb *)alloc->Alloc(alloc, numProbs * sizeof(CLzmaProb));
-+    p->numProbs = numProbs;
-+    if (p->probs == 0)
-+      return SZ_ERROR_MEM;
-+  }
-+  return SZ_OK;
-+}
-+
-+SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
-+{
-+  CLzmaProps propNew;
-+  RINOK(LzmaProps_Decode(&propNew, props, propsSize));
-+  RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc));
-+  p->prop = propNew;
-+  return SZ_OK;
-+}
-+
-+SRes LzmaDec_Allocate(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
-+{
-+  CLzmaProps propNew;
-+  SizeT dicBufSize;
-+  RINOK(LzmaProps_Decode(&propNew, props, propsSize));
-+  RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc));
-+  dicBufSize = propNew.dicSize;
-+  if (p->dic == 0 || dicBufSize != p->dicBufSize)
-+  {
-+    LzmaDec_FreeDict(p, alloc);
-+    p->dic = (Byte *)alloc->Alloc(alloc, dicBufSize);
-+    if (p->dic == 0)
-+    {
-+      LzmaDec_FreeProbs(p, alloc);
-+      return SZ_ERROR_MEM;
-+    }
-+  }
-+  p->dicBufSize = dicBufSize;
-+  p->prop = propNew;
-+  return SZ_OK;
-+}
-+
-+SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen,
-+    const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode,
-+    ELzmaStatus *status, ISzAlloc *alloc)
-+{
-+  CLzmaDec p;
-+  SRes res;
-+  SizeT inSize = *srcLen;
-+  SizeT outSize = *destLen;
-+  *srcLen = *destLen = 0;
-+  if (inSize < RC_INIT_SIZE)
-+    return SZ_ERROR_INPUT_EOF;
-+
-+  LzmaDec_Construct(&p);
-+  res = LzmaDec_AllocateProbs(&p, propData, propSize, alloc);
-+  if (res != 0)
-+    return res;
-+  p.dic = dest;
-+  p.dicBufSize = outSize;
-+
-+  LzmaDec_Init(&p);
-+  
-+  *srcLen = inSize;
-+  res = LzmaDec_DecodeToDic(&p, outSize, src, srcLen, finishMode, status);
-+
-+  if (res == SZ_OK && *status == LZMA_STATUS_NEEDS_MORE_INPUT)
-+    res = SZ_ERROR_INPUT_EOF;
-+
-+  (*destLen) = p.dicPos;
-+  LzmaDec_FreeProbs(&p, alloc);
-+  return res;
-+}
---- /dev/null
-+++ b/lib/lzma/LzmaEnc.c
-@@ -0,0 +1,2271 @@
-+/* LzmaEnc.c -- LZMA Encoder
-+2009-11-24 : Igor Pavlov : Public domain */
-+
-+#include <string.h>
-+
-+/* #define SHOW_STAT */
-+/* #define SHOW_STAT2 */
-+
-+#if defined(SHOW_STAT) || defined(SHOW_STAT2)
-+#include <stdio.h>
-+#endif
-+
-+#include "LzmaEnc.h"
-+
-+/* disable MT */
-+#define _7ZIP_ST
-+
-+#include "LzFind.h"
-+#ifndef _7ZIP_ST
-+#include "LzFindMt.h"
-+#endif
-+
-+#ifdef SHOW_STAT
-+static int ttt = 0;
-+#endif
-+
-+#define kBlockSizeMax ((1 << LZMA_NUM_BLOCK_SIZE_BITS) - 1)
-+
-+#define kBlockSize (9 << 10)
-+#define kUnpackBlockSize (1 << 18)
-+#define kMatchArraySize (1 << 21)
-+#define kMatchRecordMaxSize ((LZMA_MATCH_LEN_MAX * 2 + 3) * LZMA_MATCH_LEN_MAX)
-+
-+#define kNumMaxDirectBits (31)
-+
-+#define kNumTopBits 24
-+#define kTopValue ((UInt32)1 << kNumTopBits)
-+
-+#define kNumBitModelTotalBits 11
-+#define kBitModelTotal (1 << kNumBitModelTotalBits)
-+#define kNumMoveBits 5
-+#define kProbInitValue (kBitModelTotal >> 1)
-+
-+#define kNumMoveReducingBits 4
-+#define kNumBitPriceShiftBits 4
-+#define kBitPrice (1 << kNumBitPriceShiftBits)
-+
-+void LzmaEncProps_Init(CLzmaEncProps *p)
-+{
-+  p->level = 5;
-+  p->dictSize = p->mc = 0;
-+  p->lc = p->lp = p->pb = p->algo = p->fb = p->btMode = p->numHashBytes = p->numThreads = -1;
-+  p->writeEndMark = 0;
-+}
-+
-+void LzmaEncProps_Normalize(CLzmaEncProps *p)
-+{
-+  int level = p->level;
-+  if (level < 0) level = 5;
-+  p->level = level;
-+  if (p->dictSize == 0) p->dictSize = (level <= 5 ? (1 << (level * 2 + 14)) : (level == 6 ? (1 << 25) : (1 << 26)));
-+  if (p->lc < 0) p->lc = 3;
-+  if (p->lp < 0) p->lp = 0;
-+  if (p->pb < 0) p->pb = 2;
-+  if (p->algo < 0) p->algo = (level < 5 ? 0 : 1);
-+  if (p->fb < 0) p->fb = (level < 7 ? 32 : 64);
-+  if (p->btMode < 0) p->btMode = (p->algo == 0 ? 0 : 1);
-+  if (p->numHashBytes < 0) p->numHashBytes = 4;
-+  if (p->mc == 0)  p->mc = (16 + (p->fb >> 1)) >> (p->btMode ? 0 : 1);
-+  if (p->numThreads < 0)
-+    p->numThreads =
-+      #ifndef _7ZIP_ST
-+      ((p->btMode && p->algo) ? 2 : 1);
-+      #else
-+      1;
-+      #endif
-+}
-+
-+UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2)
-+{
-+  CLzmaEncProps props = *props2;
-+  LzmaEncProps_Normalize(&props);
-+  return props.dictSize;
-+}
-+
-+/* #define LZMA_LOG_BSR */
-+/* Define it for Intel's CPU */
-+
-+
-+#ifdef LZMA_LOG_BSR
-+
-+#define kDicLogSizeMaxCompress 30
-+
-+#define BSR2_RET(pos, res) { unsigned long i; _BitScanReverse(&i, (pos)); res = (i + i) + ((pos >> (i - 1)) & 1); }
-+
-+UInt32 GetPosSlot1(UInt32 pos)
-+{
-+  UInt32 res;
-+  BSR2_RET(pos, res);
-+  return res;
-+}
-+#define GetPosSlot2(pos, res) { BSR2_RET(pos, res); }
-+#define GetPosSlot(pos, res) { if (pos < 2) res = pos; else BSR2_RET(pos, res); }
-+
-+#else
-+
-+#define kNumLogBits (9 + (int)sizeof(size_t) / 2)
-+#define kDicLogSizeMaxCompress ((kNumLogBits - 1) * 2 + 7)
-+
-+void LzmaEnc_FastPosInit(Byte *g_FastPos)
-+{
-+  int c = 2, slotFast;
-+  g_FastPos[0] = 0;
-+  g_FastPos[1] = 1;
-+  
-+  for (slotFast = 2; slotFast < kNumLogBits * 2; slotFast++)
-+  {
-+    UInt32 k = (1 << ((slotFast >> 1) - 1));
-+    UInt32 j;
-+    for (j = 0; j < k; j++, c++)
-+      g_FastPos[c] = (Byte)slotFast;
-+  }
-+}
-+
-+#define BSR2_RET(pos, res) { UInt32 i = 6 + ((kNumLogBits - 1) & \
-+  (0 - (((((UInt32)1 << (kNumLogBits + 6)) - 1) - pos) >> 31))); \
-+  res = p->g_FastPos[pos >> i] + (i * 2); }
-+/*
-+#define BSR2_RET(pos, res) { res = (pos < (1 << (kNumLogBits + 6))) ? \
-+  p->g_FastPos[pos >> 6] + 12 : \
-+  p->g_FastPos[pos >> (6 + kNumLogBits - 1)] + (6 + (kNumLogBits - 1)) * 2; }
-+*/
-+
-+#define GetPosSlot1(pos) p->g_FastPos[pos]
-+#define GetPosSlot2(pos, res) { BSR2_RET(pos, res); }
-+#define GetPosSlot(pos, res) { if (pos < kNumFullDistances) res = p->g_FastPos[pos]; else BSR2_RET(pos, res); }
-+
-+#endif
-+
-+
-+#define LZMA_NUM_REPS 4
-+
-+typedef unsigned CState;
-+
-+typedef struct
-+{
-+  UInt32 price;
-+
-+  CState state;
-+  int prev1IsChar;
-+  int prev2;
-+
-+  UInt32 posPrev2;
-+  UInt32 backPrev2;
-+
-+  UInt32 posPrev;
-+  UInt32 backPrev;
-+  UInt32 backs[LZMA_NUM_REPS];
-+} COptimal;
-+
-+#define kNumOpts (1 << 12)
-+
-+#define kNumLenToPosStates 4
-+#define kNumPosSlotBits 6
-+#define kDicLogSizeMin 0
-+#define kDicLogSizeMax 32
-+#define kDistTableSizeMax (kDicLogSizeMax * 2)
-+
-+
-+#define kNumAlignBits 4
-+#define kAlignTableSize (1 << kNumAlignBits)
-+#define kAlignMask (kAlignTableSize - 1)
-+
-+#define kStartPosModelIndex 4
-+#define kEndPosModelIndex 14
-+#define kNumPosModels (kEndPosModelIndex - kStartPosModelIndex)
-+
-+#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
-+
-+#ifdef _LZMA_PROB32
-+#define CLzmaProb UInt32
-+#else
-+#define CLzmaProb UInt16
-+#endif
-+
-+#define LZMA_PB_MAX 4
-+#define LZMA_LC_MAX 8
-+#define LZMA_LP_MAX 4
-+
-+#define LZMA_NUM_PB_STATES_MAX (1 << LZMA_PB_MAX)
-+
-+
-+#define kLenNumLowBits 3
-+#define kLenNumLowSymbols (1 << kLenNumLowBits)
-+#define kLenNumMidBits 3
-+#define kLenNumMidSymbols (1 << kLenNumMidBits)
-+#define kLenNumHighBits 8
-+#define kLenNumHighSymbols (1 << kLenNumHighBits)
-+
-+#define kLenNumSymbolsTotal (kLenNumLowSymbols + kLenNumMidSymbols + kLenNumHighSymbols)
-+
-+#define LZMA_MATCH_LEN_MIN 2
-+#define LZMA_MATCH_LEN_MAX (LZMA_MATCH_LEN_MIN + kLenNumSymbolsTotal - 1)
-+
-+#define kNumStates 12
-+
-+typedef struct
-+{
-+  CLzmaProb choice;
-+  CLzmaProb choice2;
-+  CLzmaProb low[LZMA_NUM_PB_STATES_MAX << kLenNumLowBits];
-+  CLzmaProb mid[LZMA_NUM_PB_STATES_MAX << kLenNumMidBits];
-+  CLzmaProb high[kLenNumHighSymbols];
-+} CLenEnc;
-+
-+typedef struct
-+{
-+  CLenEnc p;
-+  UInt32 prices[LZMA_NUM_PB_STATES_MAX][kLenNumSymbolsTotal];
-+  UInt32 tableSize;
-+  UInt32 counters[LZMA_NUM_PB_STATES_MAX];
-+} CLenPriceEnc;
-+
-+typedef struct
-+{
-+  UInt32 range;
-+  Byte cache;
-+  UInt64 low;
-+  UInt64 cacheSize;
-+  Byte *buf;
-+  Byte *bufLim;
-+  Byte *bufBase;
-+  ISeqOutStream *outStream;
-+  UInt64 processed;
-+  SRes res;
-+} CRangeEnc;
-+
-+typedef struct
-+{
-+  CLzmaProb *litProbs;
-+
-+  CLzmaProb isMatch[kNumStates][LZMA_NUM_PB_STATES_MAX];
-+  CLzmaProb isRep[kNumStates];
-+  CLzmaProb isRepG0[kNumStates];
-+  CLzmaProb isRepG1[kNumStates];
-+  CLzmaProb isRepG2[kNumStates];
-+  CLzmaProb isRep0Long[kNumStates][LZMA_NUM_PB_STATES_MAX];
-+
-+  CLzmaProb posSlotEncoder[kNumLenToPosStates][1 << kNumPosSlotBits];
-+  CLzmaProb posEncoders[kNumFullDistances - kEndPosModelIndex];
-+  CLzmaProb posAlignEncoder[1 << kNumAlignBits];
-+  
-+  CLenPriceEnc lenEnc;
-+  CLenPriceEnc repLenEnc;
-+
-+  UInt32 reps[LZMA_NUM_REPS];
-+  UInt32 state;
-+} CSaveState;
-+
-+typedef struct
-+{
-+  IMatchFinder matchFinder;
-+  void *matchFinderObj;
-+
-+  #ifndef _7ZIP_ST
-+  Bool mtMode;
-+  CMatchFinderMt matchFinderMt;
-+  #endif
-+
-+  CMatchFinder matchFinderBase;
-+
-+  #ifndef _7ZIP_ST
-+  Byte pad[128];
-+  #endif
-+  
-+  UInt32 optimumEndIndex;
-+  UInt32 optimumCurrentIndex;
-+
-+  UInt32 longestMatchLength;
-+  UInt32 numPairs;
-+  UInt32 numAvail;
-+  COptimal opt[kNumOpts];
-+  
-+  #ifndef LZMA_LOG_BSR
-+  Byte g_FastPos[1 << kNumLogBits];
-+  #endif
-+
-+  UInt32 ProbPrices[kBitModelTotal >> kNumMoveReducingBits];
-+  UInt32 matches[LZMA_MATCH_LEN_MAX * 2 + 2 + 1];
-+  UInt32 numFastBytes;
-+  UInt32 additionalOffset;
-+  UInt32 reps[LZMA_NUM_REPS];
-+  UInt32 state;
-+
-+  UInt32 posSlotPrices[kNumLenToPosStates][kDistTableSizeMax];
-+  UInt32 distancesPrices[kNumLenToPosStates][kNumFullDistances];
-+  UInt32 alignPrices[kAlignTableSize];
-+  UInt32 alignPriceCount;
-+
-+  UInt32 distTableSize;
-+
-+  unsigned lc, lp, pb;
-+  unsigned lpMask, pbMask;
-+
-+  CLzmaProb *litProbs;
-+
-+  CLzmaProb isMatch[kNumStates][LZMA_NUM_PB_STATES_MAX];
-+  CLzmaProb isRep[kNumStates];
-+  CLzmaProb isRepG0[kNumStates];
-+  CLzmaProb isRepG1[kNumStates];
-+  CLzmaProb isRepG2[kNumStates];
-+  CLzmaProb isRep0Long[kNumStates][LZMA_NUM_PB_STATES_MAX];
-+
-+  CLzmaProb posSlotEncoder[kNumLenToPosStates][1 << kNumPosSlotBits];
-+  CLzmaProb posEncoders[kNumFullDistances - kEndPosModelIndex];
-+  CLzmaProb posAlignEncoder[1 << kNumAlignBits];
-+  
-+  CLenPriceEnc lenEnc;
-+  CLenPriceEnc repLenEnc;
-+
-+  unsigned lclp;
-+
-+  Bool fastMode;
-+  
-+  CRangeEnc rc;
-+
-+  Bool writeEndMark;
-+  UInt64 nowPos64;
-+  UInt32 matchPriceCount;
-+  Bool finished;
-+  Bool multiThread;
-+
-+  SRes result;
-+  UInt32 dictSize;
-+  UInt32 matchFinderCycles;
-+
-+  int needInit;
-+
-+  CSaveState saveState;
-+} CLzmaEnc;
-+
-+void LzmaEnc_SaveState(CLzmaEncHandle pp)
-+{
-+  CLzmaEnc *p = (CLzmaEnc *)pp;
-+  CSaveState *dest = &p->saveState;
-+  int i;
-+  dest->lenEnc = p->lenEnc;
-+  dest->repLenEnc = p->repLenEnc;
-+  dest->state = p->state;
-+
-+  for (i = 0; i < kNumStates; i++)
-+  {
-+    memcpy(dest->isMatch[i], p->isMatch[i], sizeof(p->isMatch[i]));
-+    memcpy(dest->isRep0Long[i], p->isRep0Long[i], sizeof(p->isRep0Long[i]));
-+  }
-+  for (i = 0; i < kNumLenToPosStates; i++)
-+    memcpy(dest->posSlotEncoder[i], p->posSlotEncoder[i], sizeof(p->posSlotEncoder[i]));
-+  memcpy(dest->isRep, p->isRep, sizeof(p->isRep));
-+  memcpy(dest->isRepG0, p->isRepG0, sizeof(p->isRepG0));
-+  memcpy(dest->isRepG1, p->isRepG1, sizeof(p->isRepG1));
-+  memcpy(dest->isRepG2, p->isRepG2, sizeof(p->isRepG2));
-+  memcpy(dest->posEncoders, p->posEncoders, sizeof(p->posEncoders));
-+  memcpy(dest->posAlignEncoder, p->posAlignEncoder, sizeof(p->posAlignEncoder));
-+  memcpy(dest->reps, p->reps, sizeof(p->reps));
-+  memcpy(dest->litProbs, p->litProbs, (0x300 << p->lclp) * sizeof(CLzmaProb));
-+}
-+
-+void LzmaEnc_RestoreState(CLzmaEncHandle pp)
-+{
-+  CLzmaEnc *dest = (CLzmaEnc *)pp;
-+  const CSaveState *p = &dest->saveState;
-+  int i;
-+  dest->lenEnc = p->lenEnc;
-+  dest->repLenEnc = p->repLenEnc;
-+  dest->state = p->state;
-+
-+  for (i = 0; i < kNumStates; i++)
-+  {
-+    memcpy(dest->isMatch[i], p->isMatch[i], sizeof(p->isMatch[i]));
-+    memcpy(dest->isRep0Long[i], p->isRep0Long[i], sizeof(p->isRep0Long[i]));
-+  }
-+  for (i = 0; i < kNumLenToPosStates; i++)
-+    memcpy(dest->posSlotEncoder[i], p->posSlotEncoder[i], sizeof(p->posSlotEncoder[i]));
-+  memcpy(dest->isRep, p->isRep, sizeof(p->isRep));
-+  memcpy(dest->isRepG0, p->isRepG0, sizeof(p->isRepG0));
-+  memcpy(dest->isRepG1, p->isRepG1, sizeof(p->isRepG1));
-+  memcpy(dest->isRepG2, p->isRepG2, sizeof(p->isRepG2));
-+  memcpy(dest->posEncoders, p->posEncoders, sizeof(p->posEncoders));
-+  memcpy(dest->posAlignEncoder, p->posAlignEncoder, sizeof(p->posAlignEncoder));
-+  memcpy(dest->reps, p->reps, sizeof(p->reps));
-+  memcpy(dest->litProbs, p->litProbs, (0x300 << dest->lclp) * sizeof(CLzmaProb));
-+}
-+
-+SRes LzmaEnc_SetProps(CLzmaEncHandle pp, const CLzmaEncProps *props2)
-+{
-+  CLzmaEnc *p = (CLzmaEnc *)pp;
-+  CLzmaEncProps props = *props2;
-+  LzmaEncProps_Normalize(&props);
-+
-+  if (props.lc > LZMA_LC_MAX || props.lp > LZMA_LP_MAX || props.pb > LZMA_PB_MAX ||
-+      props.dictSize > (1 << kDicLogSizeMaxCompress) || props.dictSize > (1 << 30))
-+    return SZ_ERROR_PARAM;
-+  p->dictSize = props.dictSize;
-+  p->matchFinderCycles = props.mc;
-+  {
-+    unsigned fb = props.fb;
-+    if (fb < 5)
-+      fb = 5;
-+    if (fb > LZMA_MATCH_LEN_MAX)
-+      fb = LZMA_MATCH_LEN_MAX;
-+    p->numFastBytes = fb;
-+  }
-+  p->lc = props.lc;
-+  p->lp = props.lp;
-+  p->pb = props.pb;
-+  p->fastMode = (props.algo == 0);
-+  p->matchFinderBase.btMode = props.btMode;
-+  {
-+    UInt32 numHashBytes = 4;
-+    if (props.btMode)
-+    {
-+      if (props.numHashBytes < 2)
-+        numHashBytes = 2;
-+      else if (props.numHashBytes < 4)
-+        numHashBytes = props.numHashBytes;
-+    }
-+    p->matchFinderBase.numHashBytes = numHashBytes;
-+  }
-+
-+  p->matchFinderBase.cutValue = props.mc;
-+
-+  p->writeEndMark = props.writeEndMark;
-+
-+  #ifndef _7ZIP_ST
-+  /*
-+  if (newMultiThread != _multiThread)
-+  {
-+    ReleaseMatchFinder();
-+    _multiThread = newMultiThread;
-+  }
-+  */
-+  p->multiThread = (props.numThreads > 1);
-+  #endif
-+
-+  return SZ_OK;
-+}
-+
-+static const int kLiteralNextStates[kNumStates] = {0, 0, 0, 0, 1, 2, 3, 4,  5,  6,   4, 5};
-+static const int kMatchNextStates[kNumStates]   = {7, 7, 7, 7, 7, 7, 7, 10, 10, 10, 10, 10};
-+static const int kRepNextStates[kNumStates]     = {8, 8, 8, 8, 8, 8, 8, 11, 11, 11, 11, 11};
-+static const int kShortRepNextStates[kNumStates]= {9, 9, 9, 9, 9, 9, 9, 11, 11, 11, 11, 11};
-+
-+#define IsCharState(s) ((s) < 7)
-+
-+#define GetLenToPosState(len) (((len) < kNumLenToPosStates + 1) ? (len) - 2 : kNumLenToPosStates - 1)
-+
-+#define kInfinityPrice (1 << 30)
-+
-+static void RangeEnc_Construct(CRangeEnc *p)
-+{
-+  p->outStream = 0;
-+  p->bufBase = 0;
-+}
-+
-+#define RangeEnc_GetProcessed(p) ((p)->processed + ((p)->buf - (p)->bufBase) + (p)->cacheSize)
-+
-+#define RC_BUF_SIZE (1 << 16)
-+static int RangeEnc_Alloc(CRangeEnc *p, ISzAlloc *alloc)
-+{
-+  if (p->bufBase == 0)
-+  {
-+    p->bufBase = (Byte *)alloc->Alloc(alloc, RC_BUF_SIZE);
-+    if (p->bufBase == 0)
-+      return 0;
-+    p->bufLim = p->bufBase + RC_BUF_SIZE;
-+  }
-+  return 1;
-+}
-+
-+static void RangeEnc_Free(CRangeEnc *p, ISzAlloc *alloc)
-+{
-+  alloc->Free(alloc, p->bufBase);
-+  p->bufBase = 0;
-+}
-+
-+static void RangeEnc_Init(CRangeEnc *p)
-+{
-+  /* Stream.Init(); */
-+  p->low = 0;
-+  p->range = 0xFFFFFFFF;
-+  p->cacheSize = 1;
-+  p->cache = 0;
-+
-+  p->buf = p->bufBase;
-+
-+  p->processed = 0;
-+  p->res = SZ_OK;
-+}
-+
-+static void RangeEnc_FlushStream(CRangeEnc *p)
-+{
-+  size_t num;
-+  if (p->res != SZ_OK)
-+    return;
-+  num = p->buf - p->bufBase;
-+  if (num != p->outStream->Write(p->outStream, p->bufBase, num))
-+    p->res = SZ_ERROR_WRITE;
-+  p->processed += num;
-+  p->buf = p->bufBase;
-+}
-+
-+static void MY_FAST_CALL RangeEnc_ShiftLow(CRangeEnc *p)
-+{
-+  if ((UInt32)p->low < (UInt32)0xFF000000 || (int)(p->low >> 32) != 0)
-+  {
-+    Byte temp = p->cache;
-+    do
-+    {
-+      Byte *buf = p->buf;
-+      *buf++ = (Byte)(temp + (Byte)(p->low >> 32));
-+      p->buf = buf;
-+      if (buf == p->bufLim)
-+        RangeEnc_FlushStream(p);
-+      temp = 0xFF;
-+    }
-+    while (--p->cacheSize != 0);
-+    p->cache = (Byte)((UInt32)p->low >> 24);
-+  }
-+  p->cacheSize++;
-+  p->low = (UInt32)p->low << 8;
-+}
-+
-+static void RangeEnc_FlushData(CRangeEnc *p)
-+{
-+  int i;
-+  for (i = 0; i < 5; i++)
-+    RangeEnc_ShiftLow(p);
-+}
-+
-+static void RangeEnc_EncodeDirectBits(CRangeEnc *p, UInt32 value, int numBits)
-+{
-+  do
-+  {
-+    p->range >>= 1;
-+    p->low += p->range & (0 - ((value >> --numBits) & 1));
-+    if (p->range < kTopValue)
-+    {
-+      p->range <<= 8;
-+      RangeEnc_ShiftLow(p);
-+    }
-+  }
-+  while (numBits != 0);
-+}
-+
-+static void RangeEnc_EncodeBit(CRangeEnc *p, CLzmaProb *prob, UInt32 symbol)
-+{
-+  UInt32 ttt = *prob;
-+  UInt32 newBound = (p->range >> kNumBitModelTotalBits) * ttt;
-+  if (symbol == 0)
-+  {
-+    p->range = newBound;
-+    ttt += (kBitModelTotal - ttt) >> kNumMoveBits;
-+  }
-+  else
-+  {
-+    p->low += newBound;
-+    p->range -= newBound;
-+    ttt -= ttt >> kNumMoveBits;
-+  }
-+  *prob = (CLzmaProb)ttt;
-+  if (p->range < kTopValue)
-+  {
-+    p->range <<= 8;
-+    RangeEnc_ShiftLow(p);
-+  }
-+}
-+
-+static void LitEnc_Encode(CRangeEnc *p, CLzmaProb *probs, UInt32 symbol)
-+{
-+  symbol |= 0x100;
-+  do
-+  {
-+    RangeEnc_EncodeBit(p, probs + (symbol >> 8), (symbol >> 7) & 1);
-+    symbol <<= 1;
-+  }
-+  while (symbol < 0x10000);
-+}
-+
-+static void LitEnc_EncodeMatched(CRangeEnc *p, CLzmaProb *probs, UInt32 symbol, UInt32 matchByte)
-+{
-+  UInt32 offs = 0x100;
-+  symbol |= 0x100;
-+  do
-+  {
-+    matchByte <<= 1;
-+    RangeEnc_EncodeBit(p, probs + (offs + (matchByte & offs) + (symbol >> 8)), (symbol >> 7) & 1);
-+    symbol <<= 1;
-+    offs &= ~(matchByte ^ symbol);
-+  }
-+  while (symbol < 0x10000);
-+}
-+
-+void LzmaEnc_InitPriceTables(UInt32 *ProbPrices)
-+{
-+  UInt32 i;
-+  for (i = (1 << kNumMoveReducingBits) / 2; i < kBitModelTotal; i += (1 << kNumMoveReducingBits))
-+  {
-+    const int kCyclesBits = kNumBitPriceShiftBits;
-+    UInt32 w = i;
-+    UInt32 bitCount = 0;
-+    int j;
-+    for (j = 0; j < kCyclesBits; j++)
-+    {
-+      w = w * w;
-+      bitCount <<= 1;
-+      while (w >= ((UInt32)1 << 16))
-+      {
-+        w >>= 1;
-+        bitCount++;
-+      }
-+    }
-+    ProbPrices[i >> kNumMoveReducingBits] = ((kNumBitModelTotalBits << kCyclesBits) - 15 - bitCount);
-+  }
-+}
-+
-+
-+#define GET_PRICE(prob, symbol) \
-+  p->ProbPrices[((prob) ^ (((-(int)(symbol))) & (kBitModelTotal - 1))) >> kNumMoveReducingBits];
-+
-+#define GET_PRICEa(prob, symbol) \
-+  ProbPrices[((prob) ^ ((-((int)(symbol))) & (kBitModelTotal - 1))) >> kNumMoveReducingBits];
-+
-+#define GET_PRICE_0(prob) p->ProbPrices[(prob) >> kNumMoveReducingBits]
-+#define GET_PRICE_1(prob) p->ProbPrices[((prob) ^ (kBitModelTotal - 1)) >> kNumMoveReducingBits]
-+
-+#define GET_PRICE_0a(prob) ProbPrices[(prob) >> kNumMoveReducingBits]
-+#define GET_PRICE_1a(prob) ProbPrices[((prob) ^ (kBitModelTotal - 1)) >> kNumMoveReducingBits]
-+
-+static UInt32 LitEnc_GetPrice(const CLzmaProb *probs, UInt32 symbol, UInt32 *ProbPrices)
-+{
-+  UInt32 price = 0;
-+  symbol |= 0x100;
-+  do
-+  {
-+    price += GET_PRICEa(probs[symbol >> 8], (symbol >> 7) & 1);
-+    symbol <<= 1;
-+  }
-+  while (symbol < 0x10000);
-+  return price;
-+}
-+
-+static UInt32 LitEnc_GetPriceMatched(const CLzmaProb *probs, UInt32 symbol, UInt32 matchByte, UInt32 *ProbPrices)
-+{
-+  UInt32 price = 0;
-+  UInt32 offs = 0x100;
-+  symbol |= 0x100;
-+  do
-+  {
-+    matchByte <<= 1;
-+    price += GET_PRICEa(probs[offs + (matchByte & offs) + (symbol >> 8)], (symbol >> 7) & 1);
-+    symbol <<= 1;
-+    offs &= ~(matchByte ^ symbol);
-+  }
-+  while (symbol < 0x10000);
-+  return price;
-+}
-+
-+
-+static void RcTree_Encode(CRangeEnc *rc, CLzmaProb *probs, int numBitLevels, UInt32 symbol)
-+{
-+  UInt32 m = 1;
-+  int i;
-+  for (i = numBitLevels; i != 0;)
-+  {
-+    UInt32 bit;
-+    i--;
-+    bit = (symbol >> i) & 1;
-+    RangeEnc_EncodeBit(rc, probs + m, bit);
-+    m = (m << 1) | bit;
-+  }
-+}
-+
-+static void RcTree_ReverseEncode(CRangeEnc *rc, CLzmaProb *probs, int numBitLevels, UInt32 symbol)
-+{
-+  UInt32 m = 1;
-+  int i;
-+  for (i = 0; i < numBitLevels; i++)
-+  {
-+    UInt32 bit = symbol & 1;
-+    RangeEnc_EncodeBit(rc, probs + m, bit);
-+    m = (m << 1) | bit;
-+    symbol >>= 1;
-+  }
-+}
-+
-+static UInt32 RcTree_GetPrice(const CLzmaProb *probs, int numBitLevels, UInt32 symbol, UInt32 *ProbPrices)
-+{
-+  UInt32 price = 0;
-+  symbol |= (1 << numBitLevels);
-+  while (symbol != 1)
-+  {
-+    price += GET_PRICEa(probs[symbol >> 1], symbol & 1);
-+    symbol >>= 1;
-+  }
-+  return price;
-+}
-+
-+static UInt32 RcTree_ReverseGetPrice(const CLzmaProb *probs, int numBitLevels, UInt32 symbol, UInt32 *ProbPrices)
-+{
-+  UInt32 price = 0;
-+  UInt32 m = 1;
-+  int i;
-+  for (i = numBitLevels; i != 0; i--)
-+  {
-+    UInt32 bit = symbol & 1;
-+    symbol >>= 1;
-+    price += GET_PRICEa(probs[m], bit);
-+    m = (m << 1) | bit;
-+  }
-+  return price;
-+}
-+
-+
-+static void LenEnc_Init(CLenEnc *p)
-+{
-+  unsigned i;
-+  p->choice = p->choice2 = kProbInitValue;
-+  for (i = 0; i < (LZMA_NUM_PB_STATES_MAX << kLenNumLowBits); i++)
-+    p->low[i] = kProbInitValue;
-+  for (i = 0; i < (LZMA_NUM_PB_STATES_MAX << kLenNumMidBits); i++)
-+    p->mid[i] = kProbInitValue;
-+  for (i = 0; i < kLenNumHighSymbols; i++)
-+    p->high[i] = kProbInitValue;
-+}
-+
-+static void LenEnc_Encode(CLenEnc *p, CRangeEnc *rc, UInt32 symbol, UInt32 posState)
-+{
-+  if (symbol < kLenNumLowSymbols)
-+  {
-+    RangeEnc_EncodeBit(rc, &p->choice, 0);
-+    RcTree_Encode(rc, p->low + (posState << kLenNumLowBits), kLenNumLowBits, symbol);
-+  }
-+  else
-+  {
-+    RangeEnc_EncodeBit(rc, &p->choice, 1);
-+    if (symbol < kLenNumLowSymbols + kLenNumMidSymbols)
-+    {
-+      RangeEnc_EncodeBit(rc, &p->choice2, 0);
-+      RcTree_Encode(rc, p->mid + (posState << kLenNumMidBits), kLenNumMidBits, symbol - kLenNumLowSymbols);
-+    }
-+    else
-+    {
-+      RangeEnc_EncodeBit(rc, &p->choice2, 1);
-+      RcTree_Encode(rc, p->high, kLenNumHighBits, symbol - kLenNumLowSymbols - kLenNumMidSymbols);
-+    }
-+  }
-+}
-+
-+static void LenEnc_SetPrices(CLenEnc *p, UInt32 posState, UInt32 numSymbols, UInt32 *prices, UInt32 *ProbPrices)
-+{
-+  UInt32 a0 = GET_PRICE_0a(p->choice);
-+  UInt32 a1 = GET_PRICE_1a(p->choice);
-+  UInt32 b0 = a1 + GET_PRICE_0a(p->choice2);
-+  UInt32 b1 = a1 + GET_PRICE_1a(p->choice2);
-+  UInt32 i = 0;
-+  for (i = 0; i < kLenNumLowSymbols; i++)
-+  {
-+    if (i >= numSymbols)
-+      return;
-+    prices[i] = a0 + RcTree_GetPrice(p->low + (posState << kLenNumLowBits), kLenNumLowBits, i, ProbPrices);
-+  }
-+  for (; i < kLenNumLowSymbols + kLenNumMidSymbols; i++)
-+  {
-+    if (i >= numSymbols)
-+      return;
-+    prices[i] = b0 + RcTree_GetPrice(p->mid + (posState << kLenNumMidBits), kLenNumMidBits, i - kLenNumLowSymbols, ProbPrices);
-+  }
-+  for (; i < numSymbols; i++)
-+    prices[i] = b1 + RcTree_GetPrice(p->high, kLenNumHighBits, i - kLenNumLowSymbols - kLenNumMidSymbols, ProbPrices);
-+}
-+
-+static void MY_FAST_CALL LenPriceEnc_UpdateTable(CLenPriceEnc *p, UInt32 posState, UInt32 *ProbPrices)
-+{
-+  LenEnc_SetPrices(&p->p, posState, p->tableSize, p->prices[posState], ProbPrices);
-+  p->counters[posState] = p->tableSize;
-+}
-+
-+static void LenPriceEnc_UpdateTables(CLenPriceEnc *p, UInt32 numPosStates, UInt32 *ProbPrices)
-+{
-+  UInt32 posState;
-+  for (posState = 0; posState < numPosStates; posState++)
-+    LenPriceEnc_UpdateTable(p, posState, ProbPrices);
-+}
-+
-+static void LenEnc_Encode2(CLenPriceEnc *p, CRangeEnc *rc, UInt32 symbol, UInt32 posState, Bool updatePrice, UInt32 *ProbPrices)
-+{
-+  LenEnc_Encode(&p->p, rc, symbol, posState);
-+  if (updatePrice)
-+    if (--p->counters[posState] == 0)
-+      LenPriceEnc_UpdateTable(p, posState, ProbPrices);
-+}
-+
-+
-+
-+
-+static void MovePos(CLzmaEnc *p, UInt32 num)
-+{
-+  #ifdef SHOW_STAT
-+  ttt += num;
-+  printf("\n MovePos %d", num);
-+  #endif
-+  if (num != 0)
-+  {
-+    p->additionalOffset += num;
-+    p->matchFinder.Skip(p->matchFinderObj, num);
-+  }
-+}
-+
-+static UInt32 ReadMatchDistances(CLzmaEnc *p, UInt32 *numDistancePairsRes)
-+{
-+  UInt32 lenRes = 0, numPairs;
-+  p->numAvail = p->matchFinder.GetNumAvailableBytes(p->matchFinderObj);
-+  numPairs = p->matchFinder.GetMatches(p->matchFinderObj, p->matches);
-+  #ifdef SHOW_STAT
-+  printf("\n i = %d numPairs = %d    ", ttt, numPairs / 2);
-+  ttt++;
-+  {
-+    UInt32 i;
-+    for (i = 0; i < numPairs; i += 2)
-+      printf("%2d %6d   | ", p->matches[i], p->matches[i + 1]);
-+  }
-+  #endif
-+  if (numPairs > 0)
-+  {
-+    lenRes = p->matches[numPairs - 2];
-+    if (lenRes == p->numFastBytes)
-+    {
-+      const Byte *pby = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
-+      UInt32 distance = p->matches[numPairs - 1] + 1;
-+      UInt32 numAvail = p->numAvail;
-+      if (numAvail > LZMA_MATCH_LEN_MAX)
-+        numAvail = LZMA_MATCH_LEN_MAX;
-+      {
-+        const Byte *pby2 = pby - distance;
-+        for (; lenRes < numAvail && pby[lenRes] == pby2[lenRes]; lenRes++);
-+      }
-+    }
-+  }
-+  p->additionalOffset++;
-+  *numDistancePairsRes = numPairs;
-+  return lenRes;
-+}
-+
-+
-+#define MakeAsChar(p) (p)->backPrev = (UInt32)(-1); (p)->prev1IsChar = False;
-+#define MakeAsShortRep(p) (p)->backPrev = 0; (p)->prev1IsChar = False;
-+#define IsShortRep(p) ((p)->backPrev == 0)
-+
-+static UInt32 GetRepLen1Price(CLzmaEnc *p, UInt32 state, UInt32 posState)
-+{
-+  return
-+    GET_PRICE_0(p->isRepG0[state]) +
-+    GET_PRICE_0(p->isRep0Long[state][posState]);
-+}
-+
-+static UInt32 GetPureRepPrice(CLzmaEnc *p, UInt32 repIndex, UInt32 state, UInt32 posState)
-+{
-+  UInt32 price;
-+  if (repIndex == 0)
-+  {
-+    price = GET_PRICE_0(p->isRepG0[state]);
-+    price += GET_PRICE_1(p->isRep0Long[state][posState]);
-+  }
-+  else
-+  {
-+    price = GET_PRICE_1(p->isRepG0[state]);
-+    if (repIndex == 1)
-+      price += GET_PRICE_0(p->isRepG1[state]);
-+    else
-+    {
-+      price += GET_PRICE_1(p->isRepG1[state]);
-+      price += GET_PRICE(p->isRepG2[state], repIndex - 2);
-+    }
-+  }
-+  return price;
-+}
-+
-+static UInt32 GetRepPrice(CLzmaEnc *p, UInt32 repIndex, UInt32 len, UInt32 state, UInt32 posState)
-+{
-+  return p->repLenEnc.prices[posState][len - LZMA_MATCH_LEN_MIN] +
-+    GetPureRepPrice(p, repIndex, state, posState);
-+}
-+
-+static UInt32 Backward(CLzmaEnc *p, UInt32 *backRes, UInt32 cur)
-+{
-+  UInt32 posMem = p->opt[cur].posPrev;
-+  UInt32 backMem = p->opt[cur].backPrev;
-+  p->optimumEndIndex = cur;
-+  do
-+  {
-+    if (p->opt[cur].prev1IsChar)
-+    {
-+      MakeAsChar(&p->opt[posMem])
-+      p->opt[posMem].posPrev = posMem - 1;
-+      if (p->opt[cur].prev2)
-+      {
-+        p->opt[posMem - 1].prev1IsChar = False;
-+        p->opt[posMem - 1].posPrev = p->opt[cur].posPrev2;
-+        p->opt[posMem - 1].backPrev = p->opt[cur].backPrev2;
-+      }
-+    }
-+    {
-+      UInt32 posPrev = posMem;
-+      UInt32 backCur = backMem;
-+      
-+      backMem = p->opt[posPrev].backPrev;
-+      posMem = p->opt[posPrev].posPrev;
-+      
-+      p->opt[posPrev].backPrev = backCur;
-+      p->opt[posPrev].posPrev = cur;
-+      cur = posPrev;
-+    }
-+  }
-+  while (cur != 0);
-+  *backRes = p->opt[0].backPrev;
-+  p->optimumCurrentIndex  = p->opt[0].posPrev;
-+  return p->optimumCurrentIndex;
-+}
-+
-+#define LIT_PROBS(pos, prevByte) (p->litProbs + ((((pos) & p->lpMask) << p->lc) + ((prevByte) >> (8 - p->lc))) * 0x300)
-+
-+static UInt32 GetOptimum(CLzmaEnc *p, UInt32 position, UInt32 *backRes)
-+{
-+  UInt32 numAvail, mainLen, numPairs, repMaxIndex, i, posState, lenEnd, len, cur;
-+  UInt32 matchPrice, repMatchPrice, normalMatchPrice;
-+  UInt32 reps[LZMA_NUM_REPS], repLens[LZMA_NUM_REPS];
-+  UInt32 *matches;
-+  const Byte *data;
-+  Byte curByte, matchByte;
-+  if (p->optimumEndIndex != p->optimumCurrentIndex)
-+  {
-+    const COptimal *opt = &p->opt[p->optimumCurrentIndex];
-+    UInt32 lenRes = opt->posPrev - p->optimumCurrentIndex;
-+    *backRes = opt->backPrev;
-+    p->optimumCurrentIndex = opt->posPrev;
-+    return lenRes;
-+  }
-+  p->optimumCurrentIndex = p->optimumEndIndex = 0;
-+  
-+  if (p->additionalOffset == 0)
-+    mainLen = ReadMatchDistances(p, &numPairs);
-+  else
-+  {
-+    mainLen = p->longestMatchLength;
-+    numPairs = p->numPairs;
-+  }
-+
-+  numAvail = p->numAvail;
-+  if (numAvail < 2)
-+  {
-+    *backRes = (UInt32)(-1);
-+    return 1;
-+  }
-+  if (numAvail > LZMA_MATCH_LEN_MAX)
-+    numAvail = LZMA_MATCH_LEN_MAX;
-+
-+  data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
-+  repMaxIndex = 0;
-+  for (i = 0; i < LZMA_NUM_REPS; i++)
-+  {
-+    UInt32 lenTest;
-+    const Byte *data2;
-+    reps[i] = p->reps[i];
-+    data2 = data - (reps[i] + 1);
-+    if (data[0] != data2[0] || data[1] != data2[1])
-+    {
-+      repLens[i] = 0;
-+      continue;
-+    }
-+    for (lenTest = 2; lenTest < numAvail && data[lenTest] == data2[lenTest]; lenTest++);
-+    repLens[i] = lenTest;
-+    if (lenTest > repLens[repMaxIndex])
-+      repMaxIndex = i;
-+  }
-+  if (repLens[repMaxIndex] >= p->numFastBytes)
-+  {
-+    UInt32 lenRes;
-+    *backRes = repMaxIndex;
-+    lenRes = repLens[repMaxIndex];
-+    MovePos(p, lenRes - 1);
-+    return lenRes;
-+  }
-+
-+  matches = p->matches;
-+  if (mainLen >= p->numFastBytes)
-+  {
-+    *backRes = matches[numPairs - 1] + LZMA_NUM_REPS;
-+    MovePos(p, mainLen - 1);
-+    return mainLen;
-+  }
-+  curByte = *data;
-+  matchByte = *(data - (reps[0] + 1));
-+
-+  if (mainLen < 2 && curByte != matchByte && repLens[repMaxIndex] < 2)
-+  {
-+    *backRes = (UInt32)-1;
-+    return 1;
-+  }
-+
-+  p->opt[0].state = (CState)p->state;
-+
-+  posState = (position & p->pbMask);
-+
-+  {
-+    const CLzmaProb *probs = LIT_PROBS(position, *(data - 1));
-+    p->opt[1].price = GET_PRICE_0(p->isMatch[p->state][posState]) +
-+        (!IsCharState(p->state) ?
-+          LitEnc_GetPriceMatched(probs, curByte, matchByte, p->ProbPrices) :
-+          LitEnc_GetPrice(probs, curByte, p->ProbPrices));
-+  }
-+
-+  MakeAsChar(&p->opt[1]);
-+
-+  matchPrice = GET_PRICE_1(p->isMatch[p->state][posState]);
-+  repMatchPrice = matchPrice + GET_PRICE_1(p->isRep[p->state]);
-+
-+  if (matchByte == curByte)
-+  {
-+    UInt32 shortRepPrice = repMatchPrice + GetRepLen1Price(p, p->state, posState);
-+    if (shortRepPrice < p->opt[1].price)
-+    {
-+      p->opt[1].price = shortRepPrice;
-+      MakeAsShortRep(&p->opt[1]);
-+    }
-+  }
-+  lenEnd = ((mainLen >= repLens[repMaxIndex]) ? mainLen : repLens[repMaxIndex]);
-+
-+  if (lenEnd < 2)
-+  {
-+    *backRes = p->opt[1].backPrev;
-+    return 1;
-+  }
-+
-+  p->opt[1].posPrev = 0;
-+  for (i = 0; i < LZMA_NUM_REPS; i++)
-+    p->opt[0].backs[i] = reps[i];
-+
-+  len = lenEnd;
-+  do
-+    p->opt[len--].price = kInfinityPrice;
-+  while (len >= 2);
-+
-+  for (i = 0; i < LZMA_NUM_REPS; i++)
-+  {
-+    UInt32 repLen = repLens[i];
-+    UInt32 price;
-+    if (repLen < 2)
-+      continue;
-+    price = repMatchPrice + GetPureRepPrice(p, i, p->state, posState);
-+    do
-+    {
-+      UInt32 curAndLenPrice = price + p->repLenEnc.prices[posState][repLen - 2];
-+      COptimal *opt = &p->opt[repLen];
-+      if (curAndLenPrice < opt->price)
-+      {
-+        opt->price = curAndLenPrice;
-+        opt->posPrev = 0;
-+        opt->backPrev = i;
-+        opt->prev1IsChar = False;
-+      }
-+    }
-+    while (--repLen >= 2);
-+  }
-+
-+  normalMatchPrice = matchPrice + GET_PRICE_0(p->isRep[p->state]);
-+
-+  len = ((repLens[0] >= 2) ? repLens[0] + 1 : 2);
-+  if (len <= mainLen)
-+  {
-+    UInt32 offs = 0;
-+    while (len > matches[offs])
-+      offs += 2;
-+    for (; ; len++)
-+    {
-+      COptimal *opt;
-+      UInt32 distance = matches[offs + 1];
-+
-+      UInt32 curAndLenPrice = normalMatchPrice + p->lenEnc.prices[posState][len - LZMA_MATCH_LEN_MIN];
-+      UInt32 lenToPosState = GetLenToPosState(len);
-+      if (distance < kNumFullDistances)
-+        curAndLenPrice += p->distancesPrices[lenToPosState][distance];
-+      else
-+      {
-+        UInt32 slot;
-+        GetPosSlot2(distance, slot);
-+        curAndLenPrice += p->alignPrices[distance & kAlignMask] + p->posSlotPrices[lenToPosState][slot];
-+      }
-+      opt = &p->opt[len];
-+      if (curAndLenPrice < opt->price)
-+      {
-+        opt->price = curAndLenPrice;
-+        opt->posPrev = 0;
-+        opt->backPrev = distance + LZMA_NUM_REPS;
-+        opt->prev1IsChar = False;
-+      }
-+      if (len == matches[offs])
-+      {
-+        offs += 2;
-+        if (offs == numPairs)
-+          break;
-+      }
-+    }
-+  }
-+
-+  cur = 0;
-+
-+    #ifdef SHOW_STAT2
-+    if (position >= 0)
-+    {
-+      unsigned i;
-+      printf("\n pos = %4X", position);
-+      for (i = cur; i <= lenEnd; i++)
-+      printf("\nprice[%4X] = %d", position - cur + i, p->opt[i].price);
-+    }
-+    #endif
-+
-+  for (;;)
-+  {
-+    UInt32 numAvailFull, newLen, numPairs, posPrev, state, posState, startLen;
-+    UInt32 curPrice, curAnd1Price, matchPrice, repMatchPrice;
-+    Bool nextIsChar;
-+    Byte curByte, matchByte;
-+    const Byte *data;
-+    COptimal *curOpt;
-+    COptimal *nextOpt;
-+
-+    cur++;
-+    if (cur == lenEnd)
-+      return Backward(p, backRes, cur);
-+
-+    newLen = ReadMatchDistances(p, &numPairs);
-+    if (newLen >= p->numFastBytes)
-+    {
-+      p->numPairs = numPairs;
-+      p->longestMatchLength = newLen;
-+      return Backward(p, backRes, cur);
-+    }
-+    position++;
-+    curOpt = &p->opt[cur];
-+    posPrev = curOpt->posPrev;
-+    if (curOpt->prev1IsChar)
-+    {
-+      posPrev--;
-+      if (curOpt->prev2)
-+      {
-+        state = p->opt[curOpt->posPrev2].state;
-+        if (curOpt->backPrev2 < LZMA_NUM_REPS)
-+          state = kRepNextStates[state];
-+        else
-+          state = kMatchNextStates[state];
-+      }
-+      else
-+        state = p->opt[posPrev].state;
-+      state = kLiteralNextStates[state];
-+    }
-+    else
-+      state = p->opt[posPrev].state;
-+    if (posPrev == cur - 1)
-+    {
-+      if (IsShortRep(curOpt))
-+        state = kShortRepNextStates[state];
-+      else
-+        state = kLiteralNextStates[state];
-+    }
-+    else
-+    {
-+      UInt32 pos;
-+      const COptimal *prevOpt;
-+      if (curOpt->prev1IsChar && curOpt->prev2)
-+      {
-+        posPrev = curOpt->posPrev2;
-+        pos = curOpt->backPrev2;
-+        state = kRepNextStates[state];
-+      }
-+      else
-+      {
-+        pos = curOpt->backPrev;
-+        if (pos < LZMA_NUM_REPS)
-+          state = kRepNextStates[state];
-+        else
-+          state = kMatchNextStates[state];
-+      }
-+      prevOpt = &p->opt[posPrev];
-+      if (pos < LZMA_NUM_REPS)
-+      {
-+        UInt32 i;
-+        reps[0] = prevOpt->backs[pos];
-+        for (i = 1; i <= pos; i++)
-+          reps[i] = prevOpt->backs[i - 1];
-+        for (; i < LZMA_NUM_REPS; i++)
-+          reps[i] = prevOpt->backs[i];
-+      }
-+      else
-+      {
-+        UInt32 i;
-+        reps[0] = (pos - LZMA_NUM_REPS);
-+        for (i = 1; i < LZMA_NUM_REPS; i++)
-+          reps[i] = prevOpt->backs[i - 1];
-+      }
-+    }
-+    curOpt->state = (CState)state;
-+
-+    curOpt->backs[0] = reps[0];
-+    curOpt->backs[1] = reps[1];
-+    curOpt->backs[2] = reps[2];
-+    curOpt->backs[3] = reps[3];
-+
-+    curPrice = curOpt->price;
-+    nextIsChar = False;
-+    data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
-+    curByte = *data;
-+    matchByte = *(data - (reps[0] + 1));
-+
-+    posState = (position & p->pbMask);
-+
-+    curAnd1Price = curPrice + GET_PRICE_0(p->isMatch[state][posState]);
-+    {
-+      const CLzmaProb *probs = LIT_PROBS(position, *(data - 1));
-+      curAnd1Price +=
-+        (!IsCharState(state) ?
-+          LitEnc_GetPriceMatched(probs, curByte, matchByte, p->ProbPrices) :
-+          LitEnc_GetPrice(probs, curByte, p->ProbPrices));
-+    }
-+
-+    nextOpt = &p->opt[cur + 1];
-+
-+    if (curAnd1Price < nextOpt->price)
-+    {
-+      nextOpt->price = curAnd1Price;
-+      nextOpt->posPrev = cur;
-+      MakeAsChar(nextOpt);
-+      nextIsChar = True;
-+    }
-+
-+    matchPrice = curPrice + GET_PRICE_1(p->isMatch[state][posState]);
-+    repMatchPrice = matchPrice + GET_PRICE_1(p->isRep[state]);
-+    
-+    if (matchByte == curByte && !(nextOpt->posPrev < cur && nextOpt->backPrev == 0))
-+    {
-+      UInt32 shortRepPrice = repMatchPrice + GetRepLen1Price(p, state, posState);
-+      if (shortRepPrice <= nextOpt->price)
-+      {
-+        nextOpt->price = shortRepPrice;
-+        nextOpt->posPrev = cur;
-+        MakeAsShortRep(nextOpt);
-+        nextIsChar = True;
-+      }
-+    }
-+    numAvailFull = p->numAvail;
-+    {
-+      UInt32 temp = kNumOpts - 1 - cur;
-+      if (temp < numAvailFull)
-+        numAvailFull = temp;
-+    }
-+
-+    if (numAvailFull < 2)
-+      continue;
-+    numAvail = (numAvailFull <= p->numFastBytes ? numAvailFull : p->numFastBytes);
-+
-+    if (!nextIsChar && matchByte != curByte) /* speed optimization */
-+    {
-+      /* try Literal + rep0 */
-+      UInt32 temp;
-+      UInt32 lenTest2;
-+      const Byte *data2 = data - (reps[0] + 1);
-+      UInt32 limit = p->numFastBytes + 1;
-+      if (limit > numAvailFull)
-+        limit = numAvailFull;
-+
-+      for (temp = 1; temp < limit && data[temp] == data2[temp]; temp++);
-+      lenTest2 = temp - 1;
-+      if (lenTest2 >= 2)
-+      {
-+        UInt32 state2 = kLiteralNextStates[state];
-+        UInt32 posStateNext = (position + 1) & p->pbMask;
-+        UInt32 nextRepMatchPrice = curAnd1Price +
-+            GET_PRICE_1(p->isMatch[state2][posStateNext]) +
-+            GET_PRICE_1(p->isRep[state2]);
-+        /* for (; lenTest2 >= 2; lenTest2--) */
-+        {
-+          UInt32 curAndLenPrice;
-+          COptimal *opt;
-+          UInt32 offset = cur + 1 + lenTest2;
-+          while (lenEnd < offset)
-+            p->opt[++lenEnd].price = kInfinityPrice;
-+          curAndLenPrice = nextRepMatchPrice + GetRepPrice(p, 0, lenTest2, state2, posStateNext);
-+          opt = &p->opt[offset];
-+          if (curAndLenPrice < opt->price)
-+          {
-+            opt->price = curAndLenPrice;
-+            opt->posPrev = cur + 1;
-+            opt->backPrev = 0;
-+            opt->prev1IsChar = True;
-+            opt->prev2 = False;
-+          }
-+        }
-+      }
-+    }
-+    
-+    startLen = 2; /* speed optimization */
-+    {
-+    UInt32 repIndex;
-+    for (repIndex = 0; repIndex < LZMA_NUM_REPS; repIndex++)
-+    {
-+      UInt32 lenTest;
-+      UInt32 lenTestTemp;
-+      UInt32 price;
-+      const Byte *data2 = data - (reps[repIndex] + 1);
-+      if (data[0] != data2[0] || data[1] != data2[1])
-+        continue;
-+      for (lenTest = 2; lenTest < numAvail && data[lenTest] == data2[lenTest]; lenTest++);
-+      while (lenEnd < cur + lenTest)
-+        p->opt[++lenEnd].price = kInfinityPrice;
-+      lenTestTemp = lenTest;
-+      price = repMatchPrice + GetPureRepPrice(p, repIndex, state, posState);
-+      do
-+      {
-+        UInt32 curAndLenPrice = price + p->repLenEnc.prices[posState][lenTest - 2];
-+        COptimal *opt = &p->opt[cur + lenTest];
-+        if (curAndLenPrice < opt->price)
-+        {
-+          opt->price = curAndLenPrice;
-+          opt->posPrev = cur;
-+          opt->backPrev = repIndex;
-+          opt->prev1IsChar = False;
-+        }
-+      }
-+      while (--lenTest >= 2);
-+      lenTest = lenTestTemp;
-+      
-+      if (repIndex == 0)
-+        startLen = lenTest + 1;
-+        
-+      /* if (_maxMode) */
-+        {
-+          UInt32 lenTest2 = lenTest + 1;
-+          UInt32 limit = lenTest2 + p->numFastBytes;
-+          UInt32 nextRepMatchPrice;
-+          if (limit > numAvailFull)
-+            limit = numAvailFull;
-+          for (; lenTest2 < limit && data[lenTest2] == data2[lenTest2]; lenTest2++);
-+          lenTest2 -= lenTest + 1;
-+          if (lenTest2 >= 2)
-+          {
-+            UInt32 state2 = kRepNextStates[state];
-+            UInt32 posStateNext = (position + lenTest) & p->pbMask;
-+            UInt32 curAndLenCharPrice =
-+                price + p->repLenEnc.prices[posState][lenTest - 2] +
-+                GET_PRICE_0(p->isMatch[state2][posStateNext]) +
-+                LitEnc_GetPriceMatched(LIT_PROBS(position + lenTest, data[lenTest - 1]),
-+                    data[lenTest], data2[lenTest], p->ProbPrices);
-+            state2 = kLiteralNextStates[state2];
-+            posStateNext = (position + lenTest + 1) & p->pbMask;
-+            nextRepMatchPrice = curAndLenCharPrice +
-+                GET_PRICE_1(p->isMatch[state2][posStateNext]) +
-+                GET_PRICE_1(p->isRep[state2]);
-+            
-+            /* for (; lenTest2 >= 2; lenTest2--) */
-+            {
-+              UInt32 curAndLenPrice;
-+              COptimal *opt;
-+              UInt32 offset = cur + lenTest + 1 + lenTest2;
-+              while (lenEnd < offset)
-+                p->opt[++lenEnd].price = kInfinityPrice;
-+              curAndLenPrice = nextRepMatchPrice + GetRepPrice(p, 0, lenTest2, state2, posStateNext);
-+              opt = &p->opt[offset];
-+              if (curAndLenPrice < opt->price)
-+              {
-+                opt->price = curAndLenPrice;
-+                opt->posPrev = cur + lenTest + 1;
-+                opt->backPrev = 0;
-+                opt->prev1IsChar = True;
-+                opt->prev2 = True;
-+                opt->posPrev2 = cur;
-+                opt->backPrev2 = repIndex;
-+              }
-+            }
-+          }
-+        }
-+    }
-+    }
-+    /* for (UInt32 lenTest = 2; lenTest <= newLen; lenTest++) */
-+    if (newLen > numAvail)
-+    {
-+      newLen = numAvail;
-+      for (numPairs = 0; newLen > matches[numPairs]; numPairs += 2);
-+      matches[numPairs] = newLen;
-+      numPairs += 2;
-+    }
-+    if (newLen >= startLen)
-+    {
-+      UInt32 normalMatchPrice = matchPrice + GET_PRICE_0(p->isRep[state]);
-+      UInt32 offs, curBack, posSlot;
-+      UInt32 lenTest;
-+      while (lenEnd < cur + newLen)
-+        p->opt[++lenEnd].price = kInfinityPrice;
-+
-+      offs = 0;
-+      while (startLen > matches[offs])
-+        offs += 2;
-+      curBack = matches[offs + 1];
-+      GetPosSlot2(curBack, posSlot);
-+      for (lenTest = /*2*/ startLen; ; lenTest++)
-+      {
-+        UInt32 curAndLenPrice = normalMatchPrice + p->lenEnc.prices[posState][lenTest - LZMA_MATCH_LEN_MIN];
-+        UInt32 lenToPosState = GetLenToPosState(lenTest);
-+        COptimal *opt;
-+        if (curBack < kNumFullDistances)
-+          curAndLenPrice += p->distancesPrices[lenToPosState][curBack];
-+        else
-+          curAndLenPrice += p->posSlotPrices[lenToPosState][posSlot] + p->alignPrices[curBack & kAlignMask];
-+        
-+        opt = &p->opt[cur + lenTest];
-+        if (curAndLenPrice < opt->price)
-+        {
-+          opt->price = curAndLenPrice;
-+          opt->posPrev = cur;
-+          opt->backPrev = curBack + LZMA_NUM_REPS;
-+          opt->prev1IsChar = False;
-+        }
-+
-+        if (/*_maxMode && */lenTest == matches[offs])
-+        {
-+          /* Try Match + Literal + Rep0 */
-+          const Byte *data2 = data - (curBack + 1);
-+          UInt32 lenTest2 = lenTest + 1;
-+          UInt32 limit = lenTest2 + p->numFastBytes;
-+          UInt32 nextRepMatchPrice;
-+          if (limit > numAvailFull)
-+            limit = numAvailFull;
-+          for (; lenTest2 < limit && data[lenTest2] == data2[lenTest2]; lenTest2++);
-+          lenTest2 -= lenTest + 1;
-+          if (lenTest2 >= 2)
-+          {
-+            UInt32 state2 = kMatchNextStates[state];
-+            UInt32 posStateNext = (position + lenTest) & p->pbMask;
-+            UInt32 curAndLenCharPrice = curAndLenPrice +
-+                GET_PRICE_0(p->isMatch[state2][posStateNext]) +
-+                LitEnc_GetPriceMatched(LIT_PROBS(position + lenTest, data[lenTest - 1]),
-+                    data[lenTest], data2[lenTest], p->ProbPrices);
-+            state2 = kLiteralNextStates[state2];
-+            posStateNext = (posStateNext + 1) & p->pbMask;
-+            nextRepMatchPrice = curAndLenCharPrice +
-+                GET_PRICE_1(p->isMatch[state2][posStateNext]) +
-+                GET_PRICE_1(p->isRep[state2]);
-+            
-+            /* for (; lenTest2 >= 2; lenTest2--) */
-+            {
-+              UInt32 offset = cur + lenTest + 1 + lenTest2;
-+              UInt32 curAndLenPrice;
-+              COptimal *opt;
-+              while (lenEnd < offset)
-+                p->opt[++lenEnd].price = kInfinityPrice;
-+              curAndLenPrice = nextRepMatchPrice + GetRepPrice(p, 0, lenTest2, state2, posStateNext);
-+              opt = &p->opt[offset];
-+              if (curAndLenPrice < opt->price)
-+              {
-+                opt->price = curAndLenPrice;
-+                opt->posPrev = cur + lenTest + 1;
-+                opt->backPrev = 0;
-+                opt->prev1IsChar = True;
-+                opt->prev2 = True;
-+                opt->posPrev2 = cur;
-+                opt->backPrev2 = curBack + LZMA_NUM_REPS;
-+              }
-+            }
-+          }
-+          offs += 2;
-+          if (offs == numPairs)
-+            break;
-+          curBack = matches[offs + 1];
-+          if (curBack >= kNumFullDistances)
-+            GetPosSlot2(curBack, posSlot);
-+        }
-+      }
-+    }
-+  }
-+}
-+
-+#define ChangePair(smallDist, bigDist) (((bigDist) >> 7) > (smallDist))
-+
-+static UInt32 GetOptimumFast(CLzmaEnc *p, UInt32 *backRes)
-+{
-+  UInt32 numAvail, mainLen, mainDist, numPairs, repIndex, repLen, i;
-+  const Byte *data;
-+  const UInt32 *matches;
-+
-+  if (p->additionalOffset == 0)
-+    mainLen = ReadMatchDistances(p, &numPairs);
-+  else
-+  {
-+    mainLen = p->longestMatchLength;
-+    numPairs = p->numPairs;
-+  }
-+
-+  numAvail = p->numAvail;
-+  *backRes = (UInt32)-1;
-+  if (numAvail < 2)
-+    return 1;
-+  if (numAvail > LZMA_MATCH_LEN_MAX)
-+    numAvail = LZMA_MATCH_LEN_MAX;
-+  data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
-+
-+  repLen = repIndex = 0;
-+  for (i = 0; i < LZMA_NUM_REPS; i++)
-+  {
-+    UInt32 len;
-+    const Byte *data2 = data - (p->reps[i] + 1);
-+    if (data[0] != data2[0] || data[1] != data2[1])
-+      continue;
-+    for (len = 2; len < numAvail && data[len] == data2[len]; len++);
-+    if (len >= p->numFastBytes)
-+    {
-+      *backRes = i;
-+      MovePos(p, len - 1);
-+      return len;
-+    }
-+    if (len > repLen)
-+    {
-+      repIndex = i;
-+      repLen = len;
-+    }
-+  }
-+
-+  matches = p->matches;
-+  if (mainLen >= p->numFastBytes)
-+  {
-+    *backRes = matches[numPairs - 1] + LZMA_NUM_REPS;
-+    MovePos(p, mainLen - 1);
-+    return mainLen;
-+  }
-+
-+  mainDist = 0; /* for GCC */
-+  if (mainLen >= 2)
-+  {
-+    mainDist = matches[numPairs - 1];
-+    while (numPairs > 2 && mainLen == matches[numPairs - 4] + 1)
-+    {
-+      if (!ChangePair(matches[numPairs - 3], mainDist))
-+        break;
-+      numPairs -= 2;
-+      mainLen = matches[numPairs - 2];
-+      mainDist = matches[numPairs - 1];
-+    }
-+    if (mainLen == 2 && mainDist >= 0x80)
-+      mainLen = 1;
-+  }
-+
-+  if (repLen >= 2 && (
-+        (repLen + 1 >= mainLen) ||
-+        (repLen + 2 >= mainLen && mainDist >= (1 << 9)) ||
-+        (repLen + 3 >= mainLen && mainDist >= (1 << 15))))
-+  {
-+    *backRes = repIndex;
-+    MovePos(p, repLen - 1);
-+    return repLen;
-+  }
-+  
-+  if (mainLen < 2 || numAvail <= 2)
-+    return 1;
-+
-+  p->longestMatchLength = ReadMatchDistances(p, &p->numPairs);
-+  if (p->longestMatchLength >= 2)
-+  {
-+    UInt32 newDistance = matches[p->numPairs - 1];
-+    if ((p->longestMatchLength >= mainLen && newDistance < mainDist) ||
-+        (p->longestMatchLength == mainLen + 1 && !ChangePair(mainDist, newDistance)) ||
-+        (p->longestMatchLength > mainLen + 1) ||
-+        (p->longestMatchLength + 1 >= mainLen && mainLen >= 3 && ChangePair(newDistance, mainDist)))
-+      return 1;
-+  }
-+  
-+  data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
-+  for (i = 0; i < LZMA_NUM_REPS; i++)
-+  {
-+    UInt32 len, limit;
-+    const Byte *data2 = data - (p->reps[i] + 1);
-+    if (data[0] != data2[0] || data[1] != data2[1])
-+      continue;
-+    limit = mainLen - 1;
-+    for (len = 2; len < limit && data[len] == data2[len]; len++);
-+    if (len >= limit)
-+      return 1;
-+  }
-+  *backRes = mainDist + LZMA_NUM_REPS;
-+  MovePos(p, mainLen - 2);
-+  return mainLen;
-+}
-+
-+static void WriteEndMarker(CLzmaEnc *p, UInt32 posState)
-+{
-+  UInt32 len;
-+  RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][posState], 1);
-+  RangeEnc_EncodeBit(&p->rc, &p->isRep[p->state], 0);
-+  p->state = kMatchNextStates[p->state];
-+  len = LZMA_MATCH_LEN_MIN;
-+  LenEnc_Encode2(&p->lenEnc, &p->rc, len - LZMA_MATCH_LEN_MIN, posState, !p->fastMode, p->ProbPrices);
-+  RcTree_Encode(&p->rc, p->posSlotEncoder[GetLenToPosState(len)], kNumPosSlotBits, (1 << kNumPosSlotBits) - 1);
-+  RangeEnc_EncodeDirectBits(&p->rc, (((UInt32)1 << 30) - 1) >> kNumAlignBits, 30 - kNumAlignBits);
-+  RcTree_ReverseEncode(&p->rc, p->posAlignEncoder, kNumAlignBits, kAlignMask);
-+}
-+
-+static SRes CheckErrors(CLzmaEnc *p)
-+{
-+  if (p->result != SZ_OK)
-+    return p->result;
-+  if (p->rc.res != SZ_OK)
-+    p->result = SZ_ERROR_WRITE;
-+  if (p->matchFinderBase.result != SZ_OK)
-+    p->result = SZ_ERROR_READ;
-+  if (p->result != SZ_OK)
-+    p->finished = True;
-+  return p->result;
-+}
-+
-+static SRes Flush(CLzmaEnc *p, UInt32 nowPos)
-+{
-+  /* ReleaseMFStream(); */
-+  p->finished = True;
-+  if (p->writeEndMark)
-+    WriteEndMarker(p, nowPos & p->pbMask);
-+  RangeEnc_FlushData(&p->rc);
-+  RangeEnc_FlushStream(&p->rc);
-+  return CheckErrors(p);
-+}
-+
-+static void FillAlignPrices(CLzmaEnc *p)
-+{
-+  UInt32 i;
-+  for (i = 0; i < kAlignTableSize; i++)
-+    p->alignPrices[i] = RcTree_ReverseGetPrice(p->posAlignEncoder, kNumAlignBits, i, p->ProbPrices);
-+  p->alignPriceCount = 0;
-+}
-+
-+static void FillDistancesPrices(CLzmaEnc *p)
-+{
-+  UInt32 tempPrices[kNumFullDistances];
-+  UInt32 i, lenToPosState;
-+  for (i = kStartPosModelIndex; i < kNumFullDistances; i++)
-+  {
-+    UInt32 posSlot = GetPosSlot1(i);
-+    UInt32 footerBits = ((posSlot >> 1) - 1);
-+    UInt32 base = ((2 | (posSlot & 1)) << footerBits);
-+    tempPrices[i] = RcTree_ReverseGetPrice(p->posEncoders + base - posSlot - 1, footerBits, i - base, p->ProbPrices);
-+  }
-+
-+  for (lenToPosState = 0; lenToPosState < kNumLenToPosStates; lenToPosState++)
-+  {
-+    UInt32 posSlot;
-+    const CLzmaProb *encoder = p->posSlotEncoder[lenToPosState];
-+    UInt32 *posSlotPrices = p->posSlotPrices[lenToPosState];
-+    for (posSlot = 0; posSlot < p->distTableSize; posSlot++)
-+      posSlotPrices[posSlot] = RcTree_GetPrice(encoder, kNumPosSlotBits, posSlot, p->ProbPrices);
-+    for (posSlot = kEndPosModelIndex; posSlot < p->distTableSize; posSlot++)
-+      posSlotPrices[posSlot] += ((((posSlot >> 1) - 1) - kNumAlignBits) << kNumBitPriceShiftBits);
-+
-+    {
-+      UInt32 *distancesPrices = p->distancesPrices[lenToPosState];
-+      UInt32 i;
-+      for (i = 0; i < kStartPosModelIndex; i++)
-+        distancesPrices[i] = posSlotPrices[i];
-+      for (; i < kNumFullDistances; i++)
-+        distancesPrices[i] = posSlotPrices[GetPosSlot1(i)] + tempPrices[i];
-+    }
-+  }
-+  p->matchPriceCount = 0;
-+}
-+
-+void LzmaEnc_Construct(CLzmaEnc *p)
-+{
-+  RangeEnc_Construct(&p->rc);
-+  MatchFinder_Construct(&p->matchFinderBase);
-+  #ifndef _7ZIP_ST
-+  MatchFinderMt_Construct(&p->matchFinderMt);
-+  p->matchFinderMt.MatchFinder = &p->matchFinderBase;
-+  #endif
-+
-+  {
-+    CLzmaEncProps props;
-+    LzmaEncProps_Init(&props);
-+    LzmaEnc_SetProps(p, &props);
-+  }
-+
-+  #ifndef LZMA_LOG_BSR
-+  LzmaEnc_FastPosInit(p->g_FastPos);
-+  #endif
-+
-+  LzmaEnc_InitPriceTables(p->ProbPrices);
-+  p->litProbs = 0;
-+  p->saveState.litProbs = 0;
-+}
-+
-+CLzmaEncHandle LzmaEnc_Create(ISzAlloc *alloc)
-+{
-+  void *p;
-+  p = alloc->Alloc(alloc, sizeof(CLzmaEnc));
-+  if (p != 0)
-+    LzmaEnc_Construct((CLzmaEnc *)p);
-+  return p;
-+}
-+
-+void LzmaEnc_FreeLits(CLzmaEnc *p, ISzAlloc *alloc)
-+{
-+  alloc->Free(alloc, p->litProbs);
-+  alloc->Free(alloc, p->saveState.litProbs);
-+  p->litProbs = 0;
-+  p->saveState.litProbs = 0;
-+}
-+
-+void LzmaEnc_Destruct(CLzmaEnc *p, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  #ifndef _7ZIP_ST
-+  MatchFinderMt_Destruct(&p->matchFinderMt, allocBig);
-+  #endif
-+  MatchFinder_Free(&p->matchFinderBase, allocBig);
-+  LzmaEnc_FreeLits(p, alloc);
-+  RangeEnc_Free(&p->rc, alloc);
-+}
-+
-+void LzmaEnc_Destroy(CLzmaEncHandle p, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  LzmaEnc_Destruct((CLzmaEnc *)p, alloc, allocBig);
-+  alloc->Free(alloc, p);
-+}
-+
-+static SRes LzmaEnc_CodeOneBlock(CLzmaEnc *p, Bool useLimits, UInt32 maxPackSize, UInt32 maxUnpackSize)
-+{
-+  UInt32 nowPos32, startPos32;
-+  if (p->needInit)
-+  {
-+    p->matchFinder.Init(p->matchFinderObj);
-+    p->needInit = 0;
-+  }
-+
-+  if (p->finished)
-+    return p->result;
-+  RINOK(CheckErrors(p));
-+
-+  nowPos32 = (UInt32)p->nowPos64;
-+  startPos32 = nowPos32;
-+
-+  if (p->nowPos64 == 0)
-+  {
-+    UInt32 numPairs;
-+    Byte curByte;
-+    if (p->matchFinder.GetNumAvailableBytes(p->matchFinderObj) == 0)
-+      return Flush(p, nowPos32);
-+    ReadMatchDistances(p, &numPairs);
-+    RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][0], 0);
-+    p->state = kLiteralNextStates[p->state];
-+    curByte = p->matchFinder.GetIndexByte(p->matchFinderObj, 0 - p->additionalOffset);
-+    LitEnc_Encode(&p->rc, p->litProbs, curByte);
-+    p->additionalOffset--;
-+    nowPos32++;
-+  }
-+
-+  if (p->matchFinder.GetNumAvailableBytes(p->matchFinderObj) != 0)
-+  for (;;)
-+  {
-+    UInt32 pos, len, posState;
-+
-+    if (p->fastMode)
-+      len = GetOptimumFast(p, &pos);
-+    else
-+      len = GetOptimum(p, nowPos32, &pos);
-+
-+    #ifdef SHOW_STAT2
-+    printf("\n pos = %4X,   len = %d   pos = %d", nowPos32, len, pos);
-+    #endif
-+
-+    posState = nowPos32 & p->pbMask;
-+    if (len == 1 && pos == (UInt32)-1)
-+    {
-+      Byte curByte;
-+      CLzmaProb *probs;
-+      const Byte *data;
-+
-+      RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][posState], 0);
-+      data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - p->additionalOffset;
-+      curByte = *data;
-+      probs = LIT_PROBS(nowPos32, *(data - 1));
-+      if (IsCharState(p->state))
-+        LitEnc_Encode(&p->rc, probs, curByte);
-+      else
-+        LitEnc_EncodeMatched(&p->rc, probs, curByte, *(data - p->reps[0] - 1));
-+      p->state = kLiteralNextStates[p->state];
-+    }
-+    else
-+    {
-+      RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][posState], 1);
-+      if (pos < LZMA_NUM_REPS)
-+      {
-+        RangeEnc_EncodeBit(&p->rc, &p->isRep[p->state], 1);
-+        if (pos == 0)
-+        {
-+          RangeEnc_EncodeBit(&p->rc, &p->isRepG0[p->state], 0);
-+          RangeEnc_EncodeBit(&p->rc, &p->isRep0Long[p->state][posState], ((len == 1) ? 0 : 1));
-+        }
-+        else
-+        {
-+          UInt32 distance = p->reps[pos];
-+          RangeEnc_EncodeBit(&p->rc, &p->isRepG0[p->state], 1);
-+          if (pos == 1)
-+            RangeEnc_EncodeBit(&p->rc, &p->isRepG1[p->state], 0);
-+          else
-+          {
-+            RangeEnc_EncodeBit(&p->rc, &p->isRepG1[p->state], 1);
-+            RangeEnc_EncodeBit(&p->rc, &p->isRepG2[p->state], pos - 2);
-+            if (pos == 3)
-+              p->reps[3] = p->reps[2];
-+            p->reps[2] = p->reps[1];
-+          }
-+          p->reps[1] = p->reps[0];
-+          p->reps[0] = distance;
-+        }
-+        if (len == 1)
-+          p->state = kShortRepNextStates[p->state];
-+        else
-+        {
-+          LenEnc_Encode2(&p->repLenEnc, &p->rc, len - LZMA_MATCH_LEN_MIN, posState, !p->fastMode, p->ProbPrices);
-+          p->state = kRepNextStates[p->state];
-+        }
-+      }
-+      else
-+      {
-+        UInt32 posSlot;
-+        RangeEnc_EncodeBit(&p->rc, &p->isRep[p->state], 0);
-+        p->state = kMatchNextStates[p->state];
-+        LenEnc_Encode2(&p->lenEnc, &p->rc, len - LZMA_MATCH_LEN_MIN, posState, !p->fastMode, p->ProbPrices);
-+        pos -= LZMA_NUM_REPS;
-+        GetPosSlot(pos, posSlot);
-+        RcTree_Encode(&p->rc, p->posSlotEncoder[GetLenToPosState(len)], kNumPosSlotBits, posSlot);
-+        
-+        if (posSlot >= kStartPosModelIndex)
-+        {
-+          UInt32 footerBits = ((posSlot >> 1) - 1);
-+          UInt32 base = ((2 | (posSlot & 1)) << footerBits);
-+          UInt32 posReduced = pos - base;
-+
-+          if (posSlot < kEndPosModelIndex)
-+            RcTree_ReverseEncode(&p->rc, p->posEncoders + base - posSlot - 1, footerBits, posReduced);
-+          else
-+          {
-+            RangeEnc_EncodeDirectBits(&p->rc, posReduced >> kNumAlignBits, footerBits - kNumAlignBits);
-+            RcTree_ReverseEncode(&p->rc, p->posAlignEncoder, kNumAlignBits, posReduced & kAlignMask);
-+            p->alignPriceCount++;
-+          }
-+        }
-+        p->reps[3] = p->reps[2];
-+        p->reps[2] = p->reps[1];
-+        p->reps[1] = p->reps[0];
-+        p->reps[0] = pos;
-+        p->matchPriceCount++;
-+      }
-+    }
-+    p->additionalOffset -= len;
-+    nowPos32 += len;
-+    if (p->additionalOffset == 0)
-+    {
-+      UInt32 processed;
-+      if (!p->fastMode)
-+      {
-+        if (p->matchPriceCount >= (1 << 7))
-+          FillDistancesPrices(p);
-+        if (p->alignPriceCount >= kAlignTableSize)
-+          FillAlignPrices(p);
-+      }
-+      if (p->matchFinder.GetNumAvailableBytes(p->matchFinderObj) == 0)
-+        break;
-+      processed = nowPos32 - startPos32;
-+      if (useLimits)
-+      {
-+        if (processed + kNumOpts + 300 >= maxUnpackSize ||
-+            RangeEnc_GetProcessed(&p->rc) + kNumOpts * 2 >= maxPackSize)
-+          break;
-+      }
-+      else if (processed >= (1 << 15))
-+      {
-+        p->nowPos64 += nowPos32 - startPos32;
-+        return CheckErrors(p);
-+      }
-+    }
-+  }
-+  p->nowPos64 += nowPos32 - startPos32;
-+  return Flush(p, nowPos32);
-+}
-+
-+#define kBigHashDicLimit ((UInt32)1 << 24)
-+
-+static SRes LzmaEnc_Alloc(CLzmaEnc *p, UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  UInt32 beforeSize = kNumOpts;
-+  Bool btMode;
-+  if (!RangeEnc_Alloc(&p->rc, alloc))
-+    return SZ_ERROR_MEM;
-+  btMode = (p->matchFinderBase.btMode != 0);
-+  #ifndef _7ZIP_ST
-+  p->mtMode = (p->multiThread && !p->fastMode && btMode);
-+  #endif
-+
-+  {
-+    unsigned lclp = p->lc + p->lp;
-+    if (p->litProbs == 0 || p->saveState.litProbs == 0 || p->lclp != lclp)
-+    {
-+      LzmaEnc_FreeLits(p, alloc);
-+      p->litProbs = (CLzmaProb *)alloc->Alloc(alloc, (0x300 << lclp) * sizeof(CLzmaProb));
-+      p->saveState.litProbs = (CLzmaProb *)alloc->Alloc(alloc, (0x300 << lclp) * sizeof(CLzmaProb));
-+      if (p->litProbs == 0 || p->saveState.litProbs == 0)
-+      {
-+        LzmaEnc_FreeLits(p, alloc);
-+        return SZ_ERROR_MEM;
-+      }
-+      p->lclp = lclp;
-+    }
-+  }
-+
-+  p->matchFinderBase.bigHash = (p->dictSize > kBigHashDicLimit);
-+
-+  if (beforeSize + p->dictSize < keepWindowSize)
-+    beforeSize = keepWindowSize - p->dictSize;
-+
-+  #ifndef _7ZIP_ST
-+  if (p->mtMode)
-+  {
-+    RINOK(MatchFinderMt_Create(&p->matchFinderMt, p->dictSize, beforeSize, p->numFastBytes, LZMA_MATCH_LEN_MAX, allocBig));
-+    p->matchFinderObj = &p->matchFinderMt;
-+    MatchFinderMt_CreateVTable(&p->matchFinderMt, &p->matchFinder);
-+  }
-+  else
-+  #endif
-+  {
-+    if (!MatchFinder_Create(&p->matchFinderBase, p->dictSize, beforeSize, p->numFastBytes, LZMA_MATCH_LEN_MAX, allocBig))
-+      return SZ_ERROR_MEM;
-+    p->matchFinderObj = &p->matchFinderBase;
-+    MatchFinder_CreateVTable(&p->matchFinderBase, &p->matchFinder);
-+  }
-+  return SZ_OK;
-+}
-+
-+void LzmaEnc_Init(CLzmaEnc *p)
-+{
-+  UInt32 i;
-+  p->state = 0;
-+  for (i = 0 ; i < LZMA_NUM_REPS; i++)
-+    p->reps[i] = 0;
-+
-+  RangeEnc_Init(&p->rc);
-+
-+
-+  for (i = 0; i < kNumStates; i++)
-+  {
-+    UInt32 j;
-+    for (j = 0; j < LZMA_NUM_PB_STATES_MAX; j++)
-+    {
-+      p->isMatch[i][j] = kProbInitValue;
-+      p->isRep0Long[i][j] = kProbInitValue;
-+    }
-+    p->isRep[i] = kProbInitValue;
-+    p->isRepG0[i] = kProbInitValue;
-+    p->isRepG1[i] = kProbInitValue;
-+    p->isRepG2[i] = kProbInitValue;
-+  }
-+
-+  {
-+    UInt32 num = 0x300 << (p->lp + p->lc);
-+    for (i = 0; i < num; i++)
-+      p->litProbs[i] = kProbInitValue;
-+  }
-+
-+  {
-+    for (i = 0; i < kNumLenToPosStates; i++)
-+    {
-+      CLzmaProb *probs = p->posSlotEncoder[i];
-+      UInt32 j;
-+      for (j = 0; j < (1 << kNumPosSlotBits); j++)
-+        probs[j] = kProbInitValue;
-+    }
-+  }
-+  {
-+    for (i = 0; i < kNumFullDistances - kEndPosModelIndex; i++)
-+      p->posEncoders[i] = kProbInitValue;
-+  }
-+
-+  LenEnc_Init(&p->lenEnc.p);
-+  LenEnc_Init(&p->repLenEnc.p);
-+
-+  for (i = 0; i < (1 << kNumAlignBits); i++)
-+    p->posAlignEncoder[i] = kProbInitValue;
-+
-+  p->optimumEndIndex = 0;
-+  p->optimumCurrentIndex = 0;
-+  p->additionalOffset = 0;
-+
-+  p->pbMask = (1 << p->pb) - 1;
-+  p->lpMask = (1 << p->lp) - 1;
-+}
-+
-+void LzmaEnc_InitPrices(CLzmaEnc *p)
-+{
-+  if (!p->fastMode)
-+  {
-+    FillDistancesPrices(p);
-+    FillAlignPrices(p);
-+  }
-+
-+  p->lenEnc.tableSize =
-+  p->repLenEnc.tableSize =
-+      p->numFastBytes + 1 - LZMA_MATCH_LEN_MIN;
-+  LenPriceEnc_UpdateTables(&p->lenEnc, 1 << p->pb, p->ProbPrices);
-+  LenPriceEnc_UpdateTables(&p->repLenEnc, 1 << p->pb, p->ProbPrices);
-+}
-+
-+static SRes LzmaEnc_AllocAndInit(CLzmaEnc *p, UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  UInt32 i;
-+  for (i = 0; i < (UInt32)kDicLogSizeMaxCompress; i++)
-+    if (p->dictSize <= ((UInt32)1 << i))
-+      break;
-+  p->distTableSize = i * 2;
-+
-+  p->finished = False;
-+  p->result = SZ_OK;
-+  RINOK(LzmaEnc_Alloc(p, keepWindowSize, alloc, allocBig));
-+  LzmaEnc_Init(p);
-+  LzmaEnc_InitPrices(p);
-+  p->nowPos64 = 0;
-+  return SZ_OK;
-+}
-+
-+static SRes LzmaEnc_Prepare(CLzmaEncHandle pp, ISeqOutStream *outStream, ISeqInStream *inStream,
-+    ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  CLzmaEnc *p = (CLzmaEnc *)pp;
-+  p->matchFinderBase.stream = inStream;
-+  p->needInit = 1;
-+  p->rc.outStream = outStream;
-+  return LzmaEnc_AllocAndInit(p, 0, alloc, allocBig);
-+}
-+
-+SRes LzmaEnc_PrepareForLzma2(CLzmaEncHandle pp,
-+    ISeqInStream *inStream, UInt32 keepWindowSize,
-+    ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  CLzmaEnc *p = (CLzmaEnc *)pp;
-+  p->matchFinderBase.stream = inStream;
-+  p->needInit = 1;
-+  return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig);
-+}
-+
-+static void LzmaEnc_SetInputBuf(CLzmaEnc *p, const Byte *src, SizeT srcLen)
-+{
-+  p->matchFinderBase.directInput = 1;
-+  p->matchFinderBase.bufferBase = (Byte *)src;
-+  p->matchFinderBase.directInputRem = srcLen;
-+}
-+
-+SRes LzmaEnc_MemPrepare(CLzmaEncHandle pp, const Byte *src, SizeT srcLen,
-+    UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  CLzmaEnc *p = (CLzmaEnc *)pp;
-+  LzmaEnc_SetInputBuf(p, src, srcLen);
-+  p->needInit = 1;
-+
-+  return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig);
-+}
-+
-+void LzmaEnc_Finish(CLzmaEncHandle pp)
-+{
-+  #ifndef _7ZIP_ST
-+  CLzmaEnc *p = (CLzmaEnc *)pp;
-+  if (p->mtMode)
-+    MatchFinderMt_ReleaseStream(&p->matchFinderMt);
-+  #else
-+  pp = pp;
-+  #endif
-+}
-+
-+typedef struct
-+{
-+  ISeqOutStream funcTable;
-+  Byte *data;
-+  SizeT rem;
-+  Bool overflow;
-+} CSeqOutStreamBuf;
-+
-+static size_t MyWrite(void *pp, const void *data, size_t size)
-+{
-+  CSeqOutStreamBuf *p = (CSeqOutStreamBuf *)pp;
-+  if (p->rem < size)
-+  {
-+    size = p->rem;
-+    p->overflow = True;
-+  }
-+  memcpy(p->data, data, size);
-+  p->rem -= size;
-+  p->data += size;
-+  return size;
-+}
-+
-+
-+UInt32 LzmaEnc_GetNumAvailableBytes(CLzmaEncHandle pp)
-+{
-+  const CLzmaEnc *p = (CLzmaEnc *)pp;
-+  return p->matchFinder.GetNumAvailableBytes(p->matchFinderObj);
-+}
-+
-+const Byte *LzmaEnc_GetCurBuf(CLzmaEncHandle pp)
-+{
-+  const CLzmaEnc *p = (CLzmaEnc *)pp;
-+  return p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - p->additionalOffset;
-+}
-+
-+SRes LzmaEnc_CodeOneMemBlock(CLzmaEncHandle pp, Bool reInit,
-+    Byte *dest, size_t *destLen, UInt32 desiredPackSize, UInt32 *unpackSize)
-+{
-+  CLzmaEnc *p = (CLzmaEnc *)pp;
-+  UInt64 nowPos64;
-+  SRes res;
-+  CSeqOutStreamBuf outStream;
-+
-+  outStream.funcTable.Write = MyWrite;
-+  outStream.data = dest;
-+  outStream.rem = *destLen;
-+  outStream.overflow = False;
-+
-+  p->writeEndMark = False;
-+  p->finished = False;
-+  p->result = SZ_OK;
-+
-+  if (reInit)
-+    LzmaEnc_Init(p);
-+  LzmaEnc_InitPrices(p);
-+  nowPos64 = p->nowPos64;
-+  RangeEnc_Init(&p->rc);
-+  p->rc.outStream = &outStream.funcTable;
-+
-+  res = LzmaEnc_CodeOneBlock(p, True, desiredPackSize, *unpackSize);
-+  
-+  *unpackSize = (UInt32)(p->nowPos64 - nowPos64);
-+  *destLen -= outStream.rem;
-+  if (outStream.overflow)
-+    return SZ_ERROR_OUTPUT_EOF;
-+
-+  return res;
-+}
-+
-+static SRes LzmaEnc_Encode2(CLzmaEnc *p, ICompressProgress *progress)
-+{
-+  SRes res = SZ_OK;
-+
-+  #ifndef _7ZIP_ST
-+  Byte allocaDummy[0x300];
-+  int i = 0;
-+  for (i = 0; i < 16; i++)
-+    allocaDummy[i] = (Byte)i;
-+  #endif
-+
-+  for (;;)
-+  {
-+    res = LzmaEnc_CodeOneBlock(p, False, 0, 0);
-+    if (res != SZ_OK || p->finished != 0)
-+      break;
-+    if (progress != 0)
-+    {
-+      res = progress->Progress(progress, p->nowPos64, RangeEnc_GetProcessed(&p->rc));
-+      if (res != SZ_OK)
-+      {
-+        res = SZ_ERROR_PROGRESS;
-+        break;
-+      }
-+    }
-+  }
-+  LzmaEnc_Finish(p);
-+  return res;
-+}
-+
-+SRes LzmaEnc_Encode(CLzmaEncHandle pp, ISeqOutStream *outStream, ISeqInStream *inStream, ICompressProgress *progress,
-+    ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  RINOK(LzmaEnc_Prepare(pp, outStream, inStream, alloc, allocBig));
-+  return LzmaEnc_Encode2((CLzmaEnc *)pp, progress);
-+}
-+
-+SRes LzmaEnc_WriteProperties(CLzmaEncHandle pp, Byte *props, SizeT *size)
-+{
-+  CLzmaEnc *p = (CLzmaEnc *)pp;
-+  int i;
-+  UInt32 dictSize = p->dictSize;
-+  if (*size < LZMA_PROPS_SIZE)
-+    return SZ_ERROR_PARAM;
-+  *size = LZMA_PROPS_SIZE;
-+  props[0] = (Byte)((p->pb * 5 + p->lp) * 9 + p->lc);
-+
-+  for (i = 11; i <= 30; i++)
-+  {
-+    if (dictSize <= ((UInt32)2 << i))
-+    {
-+      dictSize = (2 << i);
-+      break;
-+    }
-+    if (dictSize <= ((UInt32)3 << i))
-+    {
-+      dictSize = (3 << i);
-+      break;
-+    }
-+  }
-+
-+  for (i = 0; i < 4; i++)
-+    props[1 + i] = (Byte)(dictSize >> (8 * i));
-+  return SZ_OK;
-+}
-+
-+SRes LzmaEnc_MemEncode(CLzmaEncHandle pp, Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
-+    int writeEndMark, ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  SRes res;
-+  CLzmaEnc *p = (CLzmaEnc *)pp;
-+
-+  CSeqOutStreamBuf outStream;
-+
-+  LzmaEnc_SetInputBuf(p, src, srcLen);
-+
-+  outStream.funcTable.Write = MyWrite;
-+  outStream.data = dest;
-+  outStream.rem = *destLen;
-+  outStream.overflow = False;
-+
-+  p->writeEndMark = writeEndMark;
-+
-+  p->rc.outStream = &outStream.funcTable;
-+  res = LzmaEnc_MemPrepare(pp, src, srcLen, 0, alloc, allocBig);
-+  if (res == SZ_OK)
-+    res = LzmaEnc_Encode2(p, progress);
-+
-+  *destLen -= outStream.rem;
-+  if (outStream.overflow)
-+    return SZ_ERROR_OUTPUT_EOF;
-+  return res;
-+}
-+
-+SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
-+    const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark,
-+    ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  CLzmaEnc *p = (CLzmaEnc *)LzmaEnc_Create(alloc);
-+  SRes res;
-+  if (p == 0)
-+    return SZ_ERROR_MEM;
-+
-+  res = LzmaEnc_SetProps(p, props);
-+  if (res == SZ_OK)
-+  {
-+    res = LzmaEnc_WriteProperties(p, propsEncoded, propsSize);
-+    if (res == SZ_OK)
-+      res = LzmaEnc_MemEncode(p, dest, destLen, src, srcLen,
-+          writeEndMark, progress, alloc, allocBig);
-+  }
-+
-+  LzmaEnc_Destroy(p, alloc, allocBig);
-+  return res;
-+}
---- /dev/null
-+++ b/lib/lzma/Makefile
-@@ -0,0 +1,7 @@
-+lzma_compress-objs := LzFind.o LzmaEnc.o
-+lzma_decompress-objs := LzmaDec.o
-+
-+obj-$(CONFIG_LZMA_COMPRESS) += lzma_compress.o
-+obj-$(CONFIG_LZMA_DECOMPRESS) += lzma_decompress.o
-+
-+EXTRA_CFLAGS += -Iinclude/linux -Iinclude/linux/lzma -include types.h

target/linux/generic/patches-2.6.34/011-mips_boot.patch

@@ -1,11 +0,0 @@
---- a/arch/mips/kernel/head.S
-+++ b/arch/mips/kernel/head.S
-@@ -121,6 +121,8 @@
- #endif
- 	.endm
- 
-+	j kernel_entry
-+	nop
- #ifndef CONFIG_NO_EXCEPT_FILL
- 	/*
- 	 * Reserved space for exception handlers.

target/linux/generic/patches-2.6.34/012-extra_optimization.patch

@@ -1,21 +0,0 @@
---- a/Makefile
-+++ b/Makefile
-@@ -529,7 +529,7 @@ all: vmlinux
- ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
- KBUILD_CFLAGS	+= -Os
- else
--KBUILD_CFLAGS	+= -O2
-+KBUILD_CFLAGS	+= -O2 -fno-reorder-blocks -fno-tree-ch
- endif
- 
- include $(srctree)/arch/$(SRCARCH)/Makefile
-@@ -567,6 +567,9 @@ endif
- NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
- CHECKFLAGS     += $(NOSTDINC_FLAGS)
- 
-+# improve gcc optimization
-+CFLAGS += $(call cc-option,-funit-at-a-time,)
-+
- # warn about C99 declaration after statement
- KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
- 

target/linux/generic/patches-2.6.34/013-gcc4_inline_fix.patch

@@ -1,11 +0,0 @@
---- a/arch/mips/include/asm/system.h
-+++ b/arch/mips/include/asm/system.h
-@@ -198,7 +198,7 @@ extern __u64 __xchg_u64_unsupported_on_3
- #define __xchg_u64 __xchg_u64_unsupported_on_32bit_kernels
- #endif
- 
--static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
-+static __always_inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
- {
- 	switch (size) {
- 	case 4:

target/linux/generic/patches-2.6.34/014-cfi_fix_amd_extended_table_check.patch

@@ -1,50 +0,0 @@
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -325,6 +325,8 @@ static struct cfi_fixup fixup_table[] =
- static void cfi_fixup_major_minor(struct cfi_private *cfi,
- 				  struct cfi_pri_amdstd *extp)
- {
-+	// manufacturers defined in include/linux/mtd/cfi.h
-+
- 	if (cfi->mfr == CFI_MFR_SAMSUNG && cfi->id == 0x257e &&
- 	    extp->MajorVersion == '0')
- 		extp->MajorVersion = '1';
-@@ -355,6 +357,9 @@ struct mtd_info *cfi_cmdset_0002(struct
- 	mtd->name    = map->name;
- 	mtd->writesize = 1;
- 
-+	printk(" CFI mfr 0x%08x\n", cfi->mfr);	// TODO: Is there a more general place to print this info?
-+	printk(" CFI id  0x%08x\n", cfi->id);
-+
- 	if (cfi->cfi_mode==CFI_MODE_CFI){
- 		unsigned char bootloc;
- 		/*
-@@ -373,16 +378,24 @@ struct mtd_info *cfi_cmdset_0002(struct
- 
- 		cfi_fixup_major_minor(cfi, extp);
- 
--		if (extp->MajorVersion != '1' ||
--		    (extp->MinorVersion < '0' || extp->MinorVersion > '4')) {
-+		// valid primary extension versions are: 1.0, 1.1, 1.2, 1.3
-+		// see: http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_r20.pdf, page 19 and on
-+		//      http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_100_20011201.pdf
-+		if (extp->MajorVersion < '1' ||
-+		    extp->MajorVersion > '1' ||
-+		    (extp->MajorVersion == '1' && ( extp->MinorVersion < '0' || extp->MinorVersion > '3'))) {
- 			printk(KERN_ERR "  Unknown Amd/Fujitsu Extended Query "
--			       "version %c.%c.\n",  extp->MajorVersion,
--			       extp->MinorVersion);
-+			       "version %c.%c (0x%02x/0x%02x).\n",
-+			       extp->MajorVersion, extp->MinorVersion,
-+			       extp->MajorVersion, extp->MinorVersion);
- 			kfree(extp);
- 			kfree(mtd);
- 			return NULL;
- 		}
- 
-+		printk("  Amd/Fujitsu Extended Query version %c.%c.\n",
-+		       extp->MajorVersion, extp->MinorVersion);
-+
- 		/* Install our own private info structure */
- 		cfi->cmdset_priv = extp;
- 

target/linux/generic/patches-2.6.34/015-devtmpfs_ramfs.patch

@@ -1,76 +0,0 @@
-From: Peter Korsgaard <[email protected]>
-
-Make devtmpfs available on (embedded) configurations without SHMEM/TMPFS,
-using ramfs instead.
-
-Saves ~15KB.
-
-Signed-off-by: Peter Korsgaard <[email protected]>
-Acked-by: Kay Sievers <[email protected]>
-Signed-off-by: Greg Kroah-Hartman <[email protected]>
---- a/drivers/base/Kconfig
-+++ b/drivers/base/Kconfig
-@@ -18,9 +18,9 @@ config UEVENT_HELPER_PATH
- 
- config DEVTMPFS
- 	bool "Maintain a devtmpfs filesystem to mount at /dev"
--	depends on HOTPLUG && SHMEM && TMPFS
-+	depends on HOTPLUG
- 	help
--	  This creates a tmpfs filesystem instance early at bootup.
-+	  This creates a tmpfs/ramfs filesystem instance early at bootup.
- 	  In this filesystem, the kernel driver core maintains device
- 	  nodes with their default names and permissions for all
- 	  registered devices with an assigned major/minor number.
-@@ -33,6 +33,9 @@ config DEVTMPFS
- 	  functional /dev without any further help. It also allows simple
- 	  rescue systems, and reliably handles dynamic major/minor numbers.
- 
-+	  Notice: if CONFIG_TMPFS isn't enabled, the simpler ramfs
-+	  file system will be used instead.
-+
- config DEVTMPFS_MOUNT
- 	bool "Automount devtmpfs at /dev, after the kernel mounted the rootfs"
- 	depends on DEVTMPFS
---- a/drivers/base/devtmpfs.c
-+++ b/drivers/base/devtmpfs.c
-@@ -20,6 +20,7 @@
- #include <linux/namei.h>
- #include <linux/fs.h>
- #include <linux/shmem_fs.h>
-+#include <linux/ramfs.h>
- #include <linux/cred.h>
- #include <linux/sched.h>
- #include <linux/init_task.h>
-@@ -45,7 +46,11 @@ __setup("devtmpfs.mount=", mount_param);
- static int dev_get_sb(struct file_system_type *fs_type, int flags,
- 		      const char *dev_name, void *data, struct vfsmount *mnt)
- {
-+#ifdef CONFIG_TMPFS
- 	return get_sb_single(fs_type, flags, data, shmem_fill_super, mnt);
-+#else
-+	return get_sb_single(fs_type, flags, data, ramfs_fill_super, mnt);
-+#endif
- }
- 
- static struct file_system_type dev_fs_type = {
---- a/fs/ramfs/inode.c
-+++ b/fs/ramfs/inode.c
-@@ -214,7 +214,7 @@ static int ramfs_parse_options(char *dat
- 	return 0;
- }
- 
--static int ramfs_fill_super(struct super_block * sb, void * data, int silent)
-+int ramfs_fill_super(struct super_block *sb, void *data, int silent)
- {
- 	struct ramfs_fs_info *fsi;
- 	struct inode *inode = NULL;
---- a/include/linux/ramfs.h
-+++ b/include/linux/ramfs.h
-@@ -20,4 +20,6 @@ extern const struct file_operations ramf
- extern const struct vm_operations_struct generic_file_vm_ops;
- extern int __init init_rootfs(void);
- 
-+int ramfs_fill_super(struct super_block *sb, void *data, int silent);
-+
- #endif

target/linux/generic/patches-2.6.34/020-mips_multi_machine_support.patch

@@ -1,208 +0,0 @@
---- /dev/null
-+++ b/arch/mips/include/asm/mips_machine.h
-@@ -0,0 +1,54 @@
-+/*
-+ *  Copyright (C) 2008-2010 Gabor Juhos <[email protected]>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ *
-+ */
-+
-+#ifndef __ASM_MIPS_MACHINE_H
-+#define __ASM_MIPS_MACHINE_H
-+
-+#include <linux/init.h>
-+#include <linux/list.h>
-+
-+#include <asm/bootinfo.h>
-+
-+struct mips_machine {
-+	unsigned long		mach_type;
-+	const char		*mach_id;
-+	const char		*mach_name;
-+	void			(*mach_setup)(void);
-+};
-+
-+#define MIPS_MACHINE(_type, _id, _name, _setup) 		\
-+static const char machine_name_##_type[] __initconst		\
-+			__aligned(1) = _name;			\
-+static const char machine_id_##_type[] __initconst		\
-+			__aligned(1) = _id;			\
-+static struct mips_machine machine_##_type			\
-+		__used __section(.mips.machines.init) =		\
-+{								\
-+	.mach_type	= _type,				\
-+	.mach_id	= machine_id_##_type,			\
-+	.mach_name	= machine_name_##_type,			\
-+	.mach_setup	= _setup,				\
-+};
-+
-+extern long __mips_machines_start;
-+extern long __mips_machines_end;
-+
-+#ifdef CONFIG_MIPS_MACHINE
-+int  mips_machtype_setup(char *id) __init;
-+void mips_machine_setup(void) __init;
-+void mips_set_machine_name(const char *name) __init;
-+char *mips_get_machine_name(void);
-+#else
-+static inline int mips_machtype_setup(char *id) { return 1; }
-+static inline void mips_machine_setup(void) { }
-+static inline void mips_set_machine_name(const char *name) { }
-+static inline char *mips_get_machine_name(void) { return NULL; }
-+#endif /* CONFIG_MIPS_MACHINE */
-+
-+#endif /* __ASM_MIPS_MACHINE_H */
---- /dev/null
-+++ b/arch/mips/kernel/mips_machine.c
-@@ -0,0 +1,86 @@
-+/*
-+ *  Copyright (C) 2008-2010 Gabor Juhos <[email protected]>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ *
-+ */
-+#include <linux/mm.h>
-+#include <linux/string.h>
-+#include <linux/slab.h>
-+
-+#include <asm/mips_machine.h>
-+
-+static struct mips_machine *mips_machine __initdata;
-+static char *mips_machine_name = "Unknown";
-+
-+#define for_each_machine(mach) \
-+	for ((mach) = (struct mips_machine *)&__mips_machines_start; \
-+	     (mach) && \
-+	     (unsigned long)(mach) < (unsigned long)&__mips_machines_end; \
-+	     (mach)++)
-+
-+__init void mips_set_machine_name(const char *name)
-+{
-+	char *p;
-+
-+	if (name == NULL)
-+		return;
-+
-+	p = kstrdup(name, GFP_KERNEL);
-+	if (!p)
-+		pr_err("MIPS: no memory for machine_name\n");
-+
-+	mips_machine_name = p;
-+}
-+
-+char *mips_get_machine_name(void)
-+{
-+	return mips_machine_name;
-+}
-+
-+__init int mips_machtype_setup(char *id)
-+{
-+	struct mips_machine *mach;
-+
-+	for_each_machine(mach) {
-+		if (mach->mach_id == NULL)
-+			continue;
-+
-+		if (strcmp(mach->mach_id, id) == 0) {
-+			mips_machtype = mach->mach_type;
-+			return 0;
-+		}
-+	}
-+
-+	pr_err("MIPS: no machine found for id '%s', supported machines:\n", id);
-+	pr_err("%-24s : %s\n", "id", "name");
-+	for_each_machine(mach)
-+		pr_err("%-24s : %s\n", mach->mach_id, mach->mach_name);
-+
-+	return 1;
-+}
-+
-+__setup("machtype=", mips_machtype_setup);
-+
-+__init void mips_machine_setup(void)
-+{
-+	struct mips_machine *mach;
-+
-+	for_each_machine(mach) {
-+		if (mips_machtype == mach->mach_type) {
-+			mips_machine = mach;
-+			break;
-+		}
-+	}
-+
-+	if (!mips_machine)
-+		return;
-+
-+	mips_set_machine_name(mips_machine->mach_name);
-+	pr_info("MIPS: machine is %s\n", mips_machine_name);
-+
-+	if (mips_machine->mach_setup)
-+		mips_machine->mach_setup();
-+}
---- a/arch/mips/kernel/Makefile
-+++ b/arch/mips/kernel/Makefile
-@@ -94,6 +94,7 @@ obj-$(CONFIG_GPIO_TXX9)		+= gpio_txx9.o
- obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
- obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
- obj-$(CONFIG_SPINLOCK_TEST)	+= spinlock_test.o
-+obj-$(CONFIG_MIPS_MACHINE)	+= mips_machine.o
- 
- CFLAGS_cpu-bugs64.o	= $(shell if $(CC) $(KBUILD_CFLAGS) -Wa,-mdaddi -c -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-DHAVE_AS_SET_DADDI"; fi)
- 
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -853,6 +853,9 @@ config MIPS_DISABLE_OBSOLETE_IDE
- config SYNC_R4K
- 	bool
- 
-+config MIPS_MACHINE
-+	def_bool n
-+
- config NO_IOPORT
- 	def_bool n
- 
---- a/arch/mips/kernel/proc.c
-+++ b/arch/mips/kernel/proc.c
-@@ -12,6 +12,7 @@
- #include <asm/cpu-features.h>
- #include <asm/mipsregs.h>
- #include <asm/processor.h>
-+#include <asm/mips_machine.h>
- 
- unsigned int vced_count, vcei_count;
- 
-@@ -31,8 +32,12 @@ static int show_cpuinfo(struct seq_file
- 	/*
- 	 * For the first processor also print the system type
- 	 */
--	if (n == 0)
-+	if (n == 0) {
- 		seq_printf(m, "system type\t\t: %s\n", get_system_type());
-+		if (mips_get_machine_name())
-+			seq_printf(m, "machine\t\t\t: %s\n",
-+				   mips_get_machine_name());
-+	}
- 
- 	seq_printf(m, "processor\t\t: %ld\n", n);
- 	sprintf(fmt, "cpu model\t\t: %%s V%%d.%%d%s\n",
---- a/arch/mips/kernel/vmlinux.lds.S
-+++ b/arch/mips/kernel/vmlinux.lds.S
-@@ -98,6 +98,13 @@ SECTIONS
- 	INIT_TEXT_SECTION(PAGE_SIZE)
- 	INIT_DATA_SECTION(16)
- 
-+	. = ALIGN(4);
-+	.mips.machines.init : AT(ADDR(.mips.machines.init) - LOAD_OFFSET) {
-+		__mips_machines_start = .;
-+		*(.mips.machines.init)
-+		__mips_machines_end = .;
-+	}
-+
- 	/* .exit.text is discarded at runtime, not link time, to deal with
- 	 * references from .rodata
- 	 */

target/linux/generic/patches-2.6.34/021-mips_image_cmdline_hack.patch

@@ -1,28 +0,0 @@
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -856,6 +856,10 @@ config SYNC_R4K
- config MIPS_MACHINE
- 	def_bool n
- 
-+config IMAGE_CMDLINE_HACK
-+	bool "OpenWrt specific image command line hack"
-+	default n
-+
- config NO_IOPORT
- 	def_bool n
- 
---- a/arch/mips/kernel/head.S
-+++ b/arch/mips/kernel/head.S
-@@ -143,6 +143,12 @@ FEXPORT(__kernel_entry)
- 	j	kernel_entry
- #endif
- 
-+#ifdef CONFIG_IMAGE_CMDLINE_HACK
-+	.ascii	"CMDLINE:"
-+EXPORT(__image_cmdline)
-+	.fill	0x400
-+#endif /* CONFIG_IMAGE_CMDLINE_HACK */
-+
- 	__REF
- 
- NESTED(kernel_entry, 16, sp)			# kernel entry point

target/linux/generic/patches-2.6.34/022-mips_use_generic_thread_info_allocator.patch

@@ -1,18 +0,0 @@
---- a/arch/mips/include/asm/thread_info.h
-+++ b/arch/mips/include/asm/thread_info.h
-@@ -83,6 +83,7 @@ register struct thread_info *__current_t
- #define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER)
- #define THREAD_MASK (THREAD_SIZE - 1UL)
- 
-+#if 0
- #define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
- 
- #ifdef CONFIG_DEBUG_STACK_USAGE
-@@ -92,6 +93,7 @@ register struct thread_info *__current_t
- #endif
- 
- #define free_thread_info(info) kfree(info)
-+#endif
- 
- #endif /* !__ASSEMBLY__ */
- 

target/linux/generic/patches-2.6.34/023-mips-fix-kexec.patch

@@ -1,11 +0,0 @@
---- a/arch/mips/kernel/machine_kexec.c
-+++ b/arch/mips/kernel/machine_kexec.c
-@@ -52,7 +52,7 @@ machine_kexec(struct kimage *image)
- 	reboot_code_buffer =
- 	  (unsigned long)page_address(image->control_code_page);
- 
--	kexec_start_address = image->start;
-+	kexec_start_address = (unsigned long) phys_to_virt(image->start);
- 	kexec_indirection_page =
- 		(unsigned long) phys_to_virt(image->head & PAGE_MASK);
- 

target/linux/generic/patches-2.6.34/025-mips_disable_fpu.patch

@@ -1,161 +0,0 @@
-MIPS: allow disabling the kernel FPU emulator
-
-This patch allows turning off the in-kernel Algorithmics
-FPU emulator support, which allows one to save a couple of
-precious blocks on an embedded system.
-
-Signed-off-by: Florian Fainelli <[email protected]>
---
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -841,6 +841,17 @@ config I8259
- config MIPS_BONITO64
- 	bool
- 
-+config MIPS_FPU_EMU
-+	bool "Enable FPU emulation"
-+	default y
-+	help
-+	   This option allows building a kernel with or without the Algorithmics
-+	   FPU emulator enabled. Turning off this option results in a kernel which
-+	   does not catch floating operations exceptions. Make sure that your toolchain
-+	   is configured to enable software floating point emulation in that case.
-+		
-+	   If unsure say Y here.
-+
- config MIPS_MSC
- 	bool
- 
---- a/arch/mips/math-emu/Makefile
-+++ b/arch/mips/math-emu/Makefile
-@@ -2,12 +2,14 @@
- # Makefile for the Linux/MIPS kernel FPU emulation.
- #
- 
--obj-y	:= cp1emu.o ieee754m.o ieee754d.o ieee754dp.o ieee754sp.o ieee754.o \
-+obj-y	:=	kernel_linkage.o dsemul.o cp1emu.o
-+
-+obj-$(CONFIG_MIPS_FPU_EMU)	+= ieee754m.o ieee754d.o ieee754dp.o ieee754sp.o ieee754.o \
- 	   ieee754xcpt.o dp_frexp.o dp_modf.o dp_div.o dp_mul.o dp_sub.o \
- 	   dp_add.o dp_fsp.o dp_cmp.o dp_logb.o dp_scalb.o dp_simple.o \
- 	   dp_tint.o dp_fint.o dp_tlong.o dp_flong.o sp_frexp.o sp_modf.o \
- 	   sp_div.o sp_mul.o sp_sub.o sp_add.o sp_fdp.o sp_cmp.o sp_logb.o \
- 	   sp_scalb.o sp_simple.o sp_tint.o sp_fint.o sp_tlong.o sp_flong.o \
--	   dp_sqrt.o sp_sqrt.o kernel_linkage.o dsemul.o
-+	   dp_sqrt.o sp_sqrt.o
- 
- EXTRA_CFLAGS += -Werror
---- a/arch/mips/math-emu/cp1emu.c
-+++ b/arch/mips/math-emu/cp1emu.c
-@@ -58,7 +58,11 @@
- #define __mips 4
- 
- /* Function which emulates a floating point instruction. */
-+#ifdef CONFIG_DEBUG_FS
-+DEFINE_PER_CPU(struct mips_fpu_emulator_stats, fpuemustats);
-+#endif
- 
-+#ifdef CONFIG_MIPS_FPU_EMU
- static int fpu_emu(struct pt_regs *, struct mips_fpu_struct *,
- 	mips_instruction);
- 
-@@ -69,10 +73,6 @@ static int fpux_emu(struct pt_regs *,
- 
- /* Further private data for which no space exists in mips_fpu_struct */
- 
--#ifdef CONFIG_DEBUG_FS
--DEFINE_PER_CPU(struct mips_fpu_emulator_stats, fpuemustats);
--#endif
--
- /* Control registers */
- 
- #define FPCREG_RID	0	/* $0  = revision id */
-@@ -1284,7 +1284,6 @@ int fpu_emulator_cop1Handler(struct pt_r
- 
- 	return sig;
- }
--
- #ifdef CONFIG_DEBUG_FS
- 
- static int fpuemu_stat_get(void *data, u64 *val)
-@@ -1333,4 +1332,11 @@ static int __init debugfs_fpuemu(void)
- 	return 0;
- }
- __initcall(debugfs_fpuemu);
--#endif
-+#endif /* CONFIG_DEBUGFS */
-+#else
-+int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
-+        int has_fpu)
-+{
-+	return 0;
-+}
-+#endif /* CONFIG_MIPS_FPU_EMU */
---- a/arch/mips/math-emu/dsemul.c
-+++ b/arch/mips/math-emu/dsemul.c
-@@ -109,6 +109,7 @@ int mips_dsemul(struct pt_regs *regs, mi
- 	return SIGILL;		/* force out of emulation loop */
- }
- 
-+#ifdef CONFIG_MIPS_FPU_EMU
- int do_dsemulret(struct pt_regs *xcp)
- {
- 	struct emuframe __user *fr;
-@@ -165,3 +166,9 @@ int do_dsemulret(struct pt_regs *xcp)
- 
- 	return 1;
- }
-+#else
-+int do_dsemulret(struct pt_regs *xcp)
-+{
-+	return 0;
-+}
-+#endif /* CONFIG_MIPS_FPU_EMU */
---- a/arch/mips/math-emu/kernel_linkage.c
-+++ b/arch/mips/math-emu/kernel_linkage.c
-@@ -29,6 +29,7 @@
- 
- #define SIGNALLING_NAN 0x7ff800007ff80000LL
- 
-+#ifdef CONFIG_MIPS_FPU_EMU
- void fpu_emulator_init_fpu(void)
- {
- 	static int first = 1;
-@@ -112,4 +113,36 @@ int fpu_emulator_restore_context32(struc
- 
- 	return err;
- }
--#endif
-+#endif	/* CONFIG_64BIT */
-+#else
-+
-+void fpu_emulator_init_fpu(void)
-+{
-+	printk(KERN_INFO "FPU emulator disabled, make sure your toolchain"
-+		"was compiled with software floating point support (soft-float)\n");
-+	return;
-+}
-+
-+int fpu_emulator_save_context(struct sigcontext __user *sc)
-+{
-+	return 0;
-+}
-+
-+int fpu_emulator_restore_context(struct sigcontext __user *sc)
-+{
-+	return 0;
-+}
-+
-+int fpu_emulator_save_context32(struct sigcontext32 __user *sc)
-+{
-+	return 0;
-+}
-+
-+int fpu_emulator_restore_context32(struct sigcontext32 __user *sc)
-+{
-+	return 0;
-+}
-+
-+#ifdef CONFIG_64BIT
-+#endif	/* CONFIG_64BIT */
-+#endif /* CONFIG_MIPS_FPU_EMU */

target/linux/generic/patches-2.6.34/027-mips_module_reloc.patch

@@ -1,368 +0,0 @@
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -93,7 +93,7 @@ all-$(CONFIG_SYS_SUPPORTS_ZBOOT)+= vmlin
- cflags-y			+= -G 0 -mno-abicalls -fno-pic -pipe
- cflags-y			+= -msoft-float
- LDFLAGS_vmlinux			+= -G 0 -static -n -nostdlib
--MODFLAGS			+= -mlong-calls
-+MODFLAGS			+= -mno-long-calls
- 
- cflags-y += -ffreestanding
- 
---- a/arch/mips/include/asm/module.h
-+++ b/arch/mips/include/asm/module.h
-@@ -9,6 +9,11 @@ struct mod_arch_specific {
- 	struct list_head dbe_list;
- 	const struct exception_table_entry *dbe_start;
- 	const struct exception_table_entry *dbe_end;
-+
-+	void *phys_plt_tbl;
-+	void *virt_plt_tbl;
-+	unsigned int phys_plt_offset;
-+	unsigned int virt_plt_offset;
- };
- 
- typedef uint8_t Elf64_Byte;		/* Type for a 8-bit quantity.  */
---- a/arch/mips/kernel/module.c
-+++ b/arch/mips/kernel/module.c
-@@ -43,6 +43,117 @@ static struct mips_hi16 *mips_hi16_list;
- static LIST_HEAD(dbe_list);
- static DEFINE_SPINLOCK(dbe_lock);
- 
-+/*
-+ * Get the potential max trampolines size required of the init and
-+ * non-init sections. Only used if we cannot find enough contiguous
-+ * physically mapped memory to put the module into.
-+ */
-+static unsigned int
-+get_plt_size(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
-+             const char *secstrings, unsigned int symindex, bool is_init)
-+{
-+	unsigned long ret = 0;
-+	unsigned int i, j;
-+	Elf_Sym *syms;
-+
-+	/* Everything marked ALLOC (this includes the exported symbols) */
-+	for (i = 1; i < hdr->e_shnum; ++i) {
-+		unsigned int info = sechdrs[i].sh_info;
-+
-+		if (sechdrs[i].sh_type != SHT_REL
-+		    && sechdrs[i].sh_type != SHT_RELA)
-+			continue;
-+
-+		/* Not a valid relocation section? */
-+		if (info >= hdr->e_shnum)
-+			continue;
-+
-+		/* Don't bother with non-allocated sections */
-+		if (!(sechdrs[info].sh_flags & SHF_ALLOC))
-+			continue;
-+
-+		/* If it's called *.init*, and we're not init, we're
-+                   not interested */
-+		if ((strstr(secstrings + sechdrs[i].sh_name, ".init") != 0)
-+		    != is_init)
-+			continue;
-+
-+		syms = (Elf_Sym *) sechdrs[symindex].sh_addr;
-+		if (sechdrs[i].sh_type == SHT_REL) {
-+			Elf_Mips_Rel *rel = (void *) sechdrs[i].sh_addr;
-+			unsigned int size = sechdrs[i].sh_size / sizeof(*rel);
-+
-+			for (j = 0; j < size; ++j) {
-+				Elf_Sym *sym;
-+
-+				if (ELF_MIPS_R_TYPE(rel[j]) != R_MIPS_26)
-+					continue;
-+
-+				sym = syms + ELF_MIPS_R_SYM(rel[j]);
-+				if (!is_init && sym->st_shndx != SHN_UNDEF)
-+					continue;
-+
-+				ret += 4 * sizeof(int);
-+			}
-+		} else {
-+			Elf_Mips_Rela *rela = (void *) sechdrs[i].sh_addr;
-+			unsigned int size = sechdrs[i].sh_size / sizeof(*rela);
-+
-+			for (j = 0; j < size; ++j) {
-+				Elf_Sym *sym;
-+
-+				if (ELF_MIPS_R_TYPE(rela[j]) != R_MIPS_26)
-+					continue;
-+
-+				sym = syms + ELF_MIPS_R_SYM(rela[j]);
-+				if (!is_init && sym->st_shndx != SHN_UNDEF)
-+					continue;
-+
-+				ret += 4 * sizeof(int);
-+			}
-+		}
-+	}
-+
-+	return ret;
-+}
-+
-+#ifndef MODULE_START
-+static void *alloc_phys(unsigned long size)
-+{
-+	unsigned order;
-+	struct page *page;
-+	struct page *p;
-+
-+	size = PAGE_ALIGN(size);
-+	order = get_order(size);
-+
-+	page = alloc_pages(GFP_KERNEL | __GFP_NORETRY | __GFP_NOWARN |
-+			__GFP_THISNODE, order);
-+	if (!page)
-+		return NULL;
-+
-+	split_page(page, order);
-+
-+	for (p = page + (size >> PAGE_SHIFT); p < page + (1 << order); ++p)
-+		__free_page(p);
-+
-+	return page_address(page);
-+}
-+#endif
-+
-+static void free_phys(void *ptr, unsigned long size)
-+{
-+	struct page *page;
-+	struct page *end;
-+
-+	page = virt_to_page(ptr);
-+	end = page + (PAGE_ALIGN(size) >> PAGE_SHIFT);
-+
-+	for (; page < end; ++page)
-+		__free_page(page);
-+}
-+
-+
- void *module_alloc(unsigned long size)
- {
- #ifdef MODULE_START
-@@ -58,21 +169,99 @@ void *module_alloc(unsigned long size)
- 
- 	return __vmalloc_area(area, GFP_KERNEL, PAGE_KERNEL);
- #else
-+	void *ptr;
-+
- 	if (size == 0)
- 		return NULL;
--	return vmalloc(size);
-+
-+	ptr = alloc_phys(size);
-+
-+	/* If we failed to allocate physically contiguous memory,
-+	 * fall back to regular vmalloc. The module loader code will
-+	 * create jump tables to handle long jumps */
-+	if (!ptr)
-+		return vmalloc(size);
-+
-+	return ptr;
-+#endif
-+}
-+
-+static inline bool is_phys_addr(void *ptr)
-+{
-+#ifdef CONFIG_64BIT
-+	return (KSEGX((unsigned long)ptr) == CKSEG0);
-+#else
-+	return (KSEGX(ptr) == KSEG0);
- #endif
- }
- 
- /* Free memory returned from module_alloc */
- void module_free(struct module *mod, void *module_region)
- {
--	vfree(module_region);
-+	if (is_phys_addr(module_region)) {
-+		if (mod->module_init == module_region)
-+			free_phys(module_region, mod->init_size);
-+		else if (mod->module_core == module_region)
-+			free_phys(module_region, mod->core_size);
-+		else
-+			BUG();
-+	} else {
-+		vfree(module_region);
-+	}
-+}
-+
-+static void *__module_alloc(int size, bool phys)
-+{
-+	void *ptr;
-+
-+	if (phys)
-+		ptr = kmalloc(size, GFP_KERNEL);
-+	else
-+		ptr = vmalloc(size);
-+	return ptr;
-+}
-+
-+static void __module_free(void *ptr)
-+{
-+	if (is_phys_addr(ptr))
-+		kfree(ptr);
-+	else
-+		vfree(ptr);
- }
- 
- int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
- 			      char *secstrings, struct module *mod)
- {
-+	unsigned int symindex = 0;
-+	unsigned int core_size, init_size;
-+	int i;
-+
-+	for (i = 1; i < hdr->e_shnum; i++)
-+		if (sechdrs[i].sh_type == SHT_SYMTAB)
-+			symindex = i;
-+
-+	core_size = get_plt_size(hdr, sechdrs, secstrings, symindex, false);
-+	init_size = get_plt_size(hdr, sechdrs, secstrings, symindex, true);
-+
-+	mod->arch.phys_plt_offset = 0;
-+	mod->arch.virt_plt_offset = 0;
-+	mod->arch.phys_plt_tbl = NULL;
-+	mod->arch.virt_plt_tbl = NULL;
-+
-+	if ((core_size + init_size) == 0)
-+		return 0;
-+
-+	mod->arch.phys_plt_tbl = __module_alloc(core_size + init_size, 1);
-+	if (!mod->arch.phys_plt_tbl)
-+		return -ENOMEM;
-+
-+	mod->arch.virt_plt_tbl = __module_alloc(core_size + init_size, 0);
-+	if (!mod->arch.virt_plt_tbl) {
-+		__module_free(mod->arch.phys_plt_tbl);
-+		mod->arch.phys_plt_tbl = NULL;
-+		return -ENOMEM;
-+	}
-+
- 	return 0;
- }
- 
-@@ -95,28 +284,36 @@ static int apply_r_mips_32_rela(struct m
- 	return 0;
- }
- 
--static int apply_r_mips_26_rel(struct module *me, u32 *location, Elf_Addr v)
-+static Elf_Addr add_plt_entry_to(unsigned *plt_offset,
-+				 void *start, Elf_Addr v)
- {
--	if (v % 4) {
--		pr_err("module %s: dangerous R_MIPS_26 REL relocation\n",
--		       me->name);
--		return -ENOEXEC;
--	}
-+	unsigned *tramp = start + *plt_offset;
-+	*plt_offset += 4 * sizeof(int);
- 
--	if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
--		printk(KERN_ERR
--		       "module %s: relocation overflow\n",
--		       me->name);
--		return -ENOEXEC;
--	}
-+	/* adjust carry for addiu */
-+	if (v & 0x00008000)
-+		v += 0x10000;
- 
--	*location = (*location & ~0x03ffffff) |
--	            ((*location + (v >> 2)) & 0x03ffffff);
-+	tramp[0] = 0x3c190000 | (v >> 16);      /* lui t9, hi16 */
-+	tramp[1] = 0x27390000 | (v & 0xffff);   /* addiu t9, t9, lo16 */
-+	tramp[2] = 0x03200008;                  /* jr t9 */
-+	tramp[3] = 0x00000000;                  /* nop */
- 
--	return 0;
-+	return (Elf_Addr) tramp;
- }
- 
--static int apply_r_mips_26_rela(struct module *me, u32 *location, Elf_Addr v)
-+static Elf_Addr add_plt_entry(struct module *me, void *location, Elf_Addr v)
-+{
-+	if (is_phys_addr(location))
-+		return add_plt_entry_to(&me->arch.phys_plt_offset,
-+				me->arch.phys_plt_tbl, v);
-+	else
-+		return add_plt_entry_to(&me->arch.virt_plt_offset,
-+				me->arch.virt_plt_tbl, v);
-+
-+}
-+
-+static int set_r_mips_26(struct module *me, u32 *location, u32 ofs, Elf_Addr v)
- {
- 	if (v % 4) {
- 		pr_err("module %s: dangerous R_MIPS_26 RELArelocation\n",
-@@ -125,17 +322,31 @@ static int apply_r_mips_26_rela(struct m
- 	}
- 
- 	if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
--		printk(KERN_ERR
-+	    v = add_plt_entry(me, location, v + (ofs << 2));
-+		if (!v) {
-+			printk(KERN_ERR
- 		       "module %s: relocation overflow\n",
- 		       me->name);
--		return -ENOEXEC;
-+			return -ENOEXEC;
-+		}
-+		ofs = 0;
- 	}
- 
--	*location = (*location & ~0x03ffffff) | ((v >> 2) & 0x03ffffff);
-+	*location = (*location & ~0x03ffffff) | ((ofs + (v >> 2)) & 0x03ffffff);
- 
- 	return 0;
- }
- 
-+static int apply_r_mips_26_rel(struct module *me, u32 *location, Elf_Addr v)
-+{
-+	return set_r_mips_26(me, location, *location & 0x03ffffff, v);
-+}
-+
-+static int apply_r_mips_26_rela(struct module *me, u32 *location, Elf_Addr v)
-+{
-+	return set_r_mips_26(me, location, 0, v);
-+}
-+
- static int apply_r_mips_hi16_rel(struct module *me, u32 *location, Elf_Addr v)
- {
- 	struct mips_hi16 *n;
-@@ -400,11 +611,32 @@ int module_finalize(const Elf_Ehdr *hdr,
- 		list_add(&me->arch.dbe_list, &dbe_list);
- 		spin_unlock_irq(&dbe_lock);
- 	}
-+
-+	/* Get rid of the fixup trampoline if we're running the module
-+	 * from physically mapped address space */
-+	if (me->arch.phys_plt_offset == 0) {
-+		__module_free(me->arch.phys_plt_tbl);
-+		me->arch.phys_plt_tbl = NULL;
-+	}
-+	if (me->arch.virt_plt_offset == 0) {
-+		__module_free(me->arch.virt_plt_tbl);
-+		me->arch.virt_plt_tbl = NULL;
-+	}
-+
- 	return 0;
- }
- 
- void module_arch_cleanup(struct module *mod)
- {
-+	if (mod->arch.phys_plt_tbl) {
-+		__module_free(mod->arch.phys_plt_tbl);
-+		mod->arch.phys_plt_tbl = NULL;
-+	}
-+	if (mod->arch.virt_plt_tbl) {
-+		__module_free(mod->arch.virt_plt_tbl);
-+		mod->arch.virt_plt_tbl = NULL;
-+	}
-+
- 	spin_lock_irq(&dbe_lock);
- 	list_del(&mod->arch.dbe_list);
- 	spin_unlock_irq(&dbe_lock);

target/linux/generic/patches-2.6.34/028-module_exports.patch

@@ -1,119 +0,0 @@
---- a/include/asm-generic/vmlinux.lds.h
-+++ b/include/asm-generic/vmlinux.lds.h
-@@ -52,6 +52,27 @@
- #define LOAD_OFFSET 0
- #endif
- 
-+#ifndef SYMTAB_KEEP_STR
-+#define SYMTAB_KEEP_STR *(__ksymtab_strings.*)
-+#define SYMTAB_DISCARD_STR
-+#else
-+#define SYMTAB_DISCARD_STR *(__ksymtab_strings.*)
-+#endif
-+
-+#ifndef SYMTAB_KEEP
-+#define SYMTAB_KEEP *(__ksymtab.*)
-+#define SYMTAB_DISCARD
-+#else
-+#define SYMTAB_DISCARD *(__ksymtab.*)
-+#endif
-+
-+#ifndef SYMTAB_KEEP_GPL
-+#define SYMTAB_KEEP_GPL *(__ksymtab_gpl.*)
-+#define SYMTAB_DISCARD_GPL
-+#else
-+#define SYMTAB_DISCARD_GPL *(__ksymtab_gpl.*)
-+#endif
-+
- #ifndef SYMBOL_PREFIX
- #define VMLINUX_SYMBOL(sym) sym
- #else
-@@ -258,35 +279,35 @@
- 	/* Kernel symbol table: Normal symbols */			\
- 	__ksymtab         : AT(ADDR(__ksymtab) - LOAD_OFFSET) {		\
- 		VMLINUX_SYMBOL(__start___ksymtab) = .;			\
--		*(__ksymtab)						\
-+		SYMTAB_KEEP						\
- 		VMLINUX_SYMBOL(__stop___ksymtab) = .;			\
- 	}								\
- 									\
- 	/* Kernel symbol table: GPL-only symbols */			\
- 	__ksymtab_gpl     : AT(ADDR(__ksymtab_gpl) - LOAD_OFFSET) {	\
- 		VMLINUX_SYMBOL(__start___ksymtab_gpl) = .;		\
--		*(__ksymtab_gpl)					\
-+		SYMTAB_KEEP_GPL						\
- 		VMLINUX_SYMBOL(__stop___ksymtab_gpl) = .;		\
- 	}								\
- 									\
- 	/* Kernel symbol table: Normal unused symbols */		\
- 	__ksymtab_unused  : AT(ADDR(__ksymtab_unused) - LOAD_OFFSET) {	\
- 		VMLINUX_SYMBOL(__start___ksymtab_unused) = .;		\
--		*(__ksymtab_unused)					\
-+		*(__ksymtab_unused.*)					\
- 		VMLINUX_SYMBOL(__stop___ksymtab_unused) = .;		\
- 	}								\
- 									\
- 	/* Kernel symbol table: GPL-only unused symbols */		\
- 	__ksymtab_unused_gpl : AT(ADDR(__ksymtab_unused_gpl) - LOAD_OFFSET) { \
- 		VMLINUX_SYMBOL(__start___ksymtab_unused_gpl) = .;	\
--		*(__ksymtab_unused_gpl)					\
-+		*(__ksymtab_unused_gpl.*)				\
- 		VMLINUX_SYMBOL(__stop___ksymtab_unused_gpl) = .;	\
- 	}								\
- 									\
- 	/* Kernel symbol table: GPL-future-only symbols */		\
- 	__ksymtab_gpl_future : AT(ADDR(__ksymtab_gpl_future) - LOAD_OFFSET) { \
- 		VMLINUX_SYMBOL(__start___ksymtab_gpl_future) = .;	\
--		*(__ksymtab_gpl_future)					\
-+		*(__ksymtab_gpl_future.*)				\
- 		VMLINUX_SYMBOL(__stop___ksymtab_gpl_future) = .;	\
- 	}								\
- 									\
-@@ -327,7 +348,7 @@
- 									\
- 	/* Kernel symbol table: strings */				\
-         __ksymtab_strings : AT(ADDR(__ksymtab_strings) - LOAD_OFFSET) {	\
--		*(__ksymtab_strings)					\
-+		SYMTAB_KEEP_STR						\
- 	}								\
- 									\
- 	/* __*init sections */						\
-@@ -642,6 +663,9 @@
- 	EXIT_TEXT							\
- 	EXIT_DATA							\
- 	EXIT_CALL							\
-+	SYMTAB_DISCARD							\
-+	SYMTAB_DISCARD_GPL						\
-+	SYMTAB_DISCARD_STR						\
- 	*(.discard)							\
- 	}
- 
---- a/include/linux/module.h
-+++ b/include/linux/module.h
-@@ -195,16 +195,24 @@ void *__symbol_get_gpl(const char *symbo
- #define __CRC_SYMBOL(sym, sec)
- #endif
- 
-+#ifdef MODULE
-+#define __EXPORT_SUFFIX(sym)
-+#else
-+#define __EXPORT_SUFFIX(sym) "." #sym
-+#endif
-+
- /* For every exported symbol, place a struct in the __ksymtab section */
- #define __EXPORT_SYMBOL(sym, sec)				\
- 	extern typeof(sym) sym;					\
- 	__CRC_SYMBOL(sym, sec)					\
- 	static const char __kstrtab_##sym[]			\
--	__attribute__((section("__ksymtab_strings"), aligned(1))) \
-+	__attribute__((section("__ksymtab_strings"		\
-+	  __EXPORT_SUFFIX(sym)), aligned(1)))			\
- 	= MODULE_SYMBOL_PREFIX #sym;                    	\
- 	static const struct kernel_symbol __ksymtab_##sym	\
- 	__used							\
--	__attribute__((section("__ksymtab" sec), unused))	\
-+	__attribute__((section("__ksymtab" sec			\
-+	  __EXPORT_SUFFIX(sym)), unused))			\
- 	= { (unsigned long)&sym, __kstrtab_##sym }
- 
- #define EXPORT_SYMBOL(sym)					\

target/linux/generic/patches-2.6.34/029-arm_module_unresolved_weak_sym.patch

@@ -1,13 +0,0 @@
---- a/arch/arm/kernel/module.c
-+++ b/arch/arm/kernel/module.c
-@@ -121,6 +121,10 @@ apply_relocate(Elf32_Shdr *sechdrs, cons
- 			return -ENOEXEC;
- 		}
- 
-+		if ((IS_ERR_VALUE(sym->st_value) || !sym->st_value) &&
-+		    ELF_ST_BIND(sym->st_info) == STB_WEAK)
-+			continue;
-+
- 		loc = dstsec->sh_addr + rel->r_offset;
- 
- 		switch (ELF32_R_TYPE(rel->r_info)) {

target/linux/generic/patches-2.6.34/030-pci_disable_common_quirks.patch

@@ -1,43 +0,0 @@
---- a/drivers/pci/Kconfig
-+++ b/drivers/pci/Kconfig
-@@ -40,6 +40,12 @@ config PCI_STUB
- 
- 	  When in doubt, say N.
- 
-+config PCI_DISABLE_COMMON_QUIRKS
-+	bool "PCI disable common quirks"
-+	depends on PCI
-+	help
-+	  If you don't know what to do here, say N.
-+
- config HT_IRQ
- 	bool "Interrupts on hypertransport devices"
- 	default y
---- a/drivers/pci/quirks.c
-+++ b/drivers/pci/quirks.c
-@@ -91,6 +91,7 @@ static void __devinit quirk_resource_ali
- }
- DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_resource_alignment);
- 
-+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
- /* The Mellanox Tavor device gives false positive parity errors
-  * Mark this device with a broken_parity_status, to allow
-  * PCI scanning code to "skip" this now blacklisted device.
-@@ -1924,7 +1925,9 @@ static void __devinit fixup_rev1_53c810(
- 	}
- }
- DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810);
-+#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
- 
-+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
- /* Enable 1k I/O space granularity on the Intel P64H2 */
- static void __devinit quirk_p64h2_1k_io(struct pci_dev *dev)
- {
-@@ -2580,6 +2583,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
- DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1518, quirk_i82576_sriov);
- 
- #endif	/* CONFIG_PCI_IOV */
-+#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
- 
- /*
-  * This is a quirk for the Ricoh MMC controller found as a part of

target/linux/generic/patches-2.6.34/031-ppc_gcc_build_fix.patch

@@ -1,226 +0,0 @@
-GCC 4.4.x looks to be adding support for generating out-of-line register
-saves/restores based on:
-
-http://gcc.gnu.org/ml/gcc-patches/2008-04/msg01678.html
-
-This breaks the kernel build as we'd have to link with libgcc to get the
-implementation of the register save/restores.
-
-To workaround this issue, we just stole the save/restore code from gcc
-and simplified it down for our needs (integer only).  We only do this if
-PPC32 as gcc makes believe the linker on ppc64 will deal with this and
-only if CONFIG_CC_OPTIMIZE_FOR_SIZE is set (thus -Os).
-
-Signed-off-by: Kumar Gala <[EMAIL PROTECTED]>
----
-
-If someone using cutting edge toolchains for ppc64 could test and make
-sure if we enable CONFIG_CC_OPTIMIZE_FOR_SIZE things work that would be
-nice.
-
-- k
-
- arch/powerpc/kernel/misc_32.S   |   77 +++++++++++++++++++++++++++
- arch/powerpc/kernel/ppc_ksyms.c |  111 +++++++++++++++++++++++++++++++++++++++
- 2 files changed, 188 insertions(+), 0 deletions(-)
-
---- a/arch/powerpc/kernel/misc_32.S
-+++ b/arch/powerpc/kernel/misc_32.S
-@@ -802,3 +802,80 @@ relocate_new_kernel_end:
- relocate_new_kernel_size:
- 	.long relocate_new_kernel_end - relocate_new_kernel
- #endif
-+
-+#if defined(CONFIG_PPC32) && defined(CONFIG_CC_OPTIMIZE_FOR_SIZE)
-+/* Routines for saving integer registers, called by the compiler.  */
-+/* Called with r11 pointing to the stack header word of the caller of the */
-+/* function, just beyond the end of the integer save area.  */
-+
-+_GLOBAL(_savegpr_14)   stw     14,-72(11)      /* save gp registers */
-+_GLOBAL(_savegpr_15)   stw     15,-68(11)
-+_GLOBAL(_savegpr_16)   stw     16,-64(11)
-+_GLOBAL(_savegpr_17)   stw     17,-60(11)
-+_GLOBAL(_savegpr_18)   stw     18,-56(11)
-+_GLOBAL(_savegpr_19)   stw     19,-52(11)
-+_GLOBAL(_savegpr_20)   stw     20,-48(11)
-+_GLOBAL(_savegpr_21)   stw     21,-44(11)
-+_GLOBAL(_savegpr_22)   stw     22,-40(11)
-+_GLOBAL(_savegpr_23)   stw     23,-36(11)
-+_GLOBAL(_savegpr_24)   stw     24,-32(11)
-+_GLOBAL(_savegpr_25)   stw     25,-28(11)
-+_GLOBAL(_savegpr_26)   stw     26,-24(11)
-+_GLOBAL(_savegpr_27)   stw     27,-20(11)
-+_GLOBAL(_savegpr_28)   stw     28,-16(11)
-+_GLOBAL(_savegpr_29)   stw     29,-12(11)
-+_GLOBAL(_savegpr_30)   stw     30,-8(11)
-+_GLOBAL(_savegpr_31)   stw     31,-4(11)
-+                       blr
-+
-+/* Routines for restoring integer registers, called by the compiler.  */
-+/* Called with r11 pointing to the stack header word of the caller of the */
-+/* function, just beyond the end of the integer restore area.  */
-+
-+_GLOBAL(_restgpr_14)   lwz     14,-72(11)      /* restore gp registers */
-+_GLOBAL(_restgpr_15)   lwz     15,-68(11)
-+_GLOBAL(_restgpr_16)   lwz     16,-64(11)
-+_GLOBAL(_restgpr_17)   lwz     17,-60(11)
-+_GLOBAL(_restgpr_18)   lwz     18,-56(11)
-+_GLOBAL(_restgpr_19)   lwz     19,-52(11)
-+_GLOBAL(_restgpr_20)   lwz     20,-48(11)
-+_GLOBAL(_restgpr_21)   lwz     21,-44(11)
-+_GLOBAL(_restgpr_22)   lwz     22,-40(11)
-+_GLOBAL(_restgpr_23)   lwz     23,-36(11)
-+_GLOBAL(_restgpr_24)   lwz     24,-32(11)
-+_GLOBAL(_restgpr_25)   lwz     25,-28(11)
-+_GLOBAL(_restgpr_26)   lwz     26,-24(11)
-+_GLOBAL(_restgpr_27)   lwz     27,-20(11)
-+_GLOBAL(_restgpr_28)   lwz     28,-16(11)
-+_GLOBAL(_restgpr_29)   lwz     29,-12(11)
-+_GLOBAL(_restgpr_30)   lwz     30,-8(11)
-+_GLOBAL(_restgpr_31)   lwz     31,-4(11)
-+                       blr
-+
-+/* Routines for restoring integer registers, called by the compiler.  */
-+/* Called with r11 pointing to the stack header word of the caller of the */
-+/* function, just beyond the end of the integer restore area.  */
-+
-+_GLOBAL(_restgpr_14_x) lwz     14,-72(11)      /* restore gp registers */
-+_GLOBAL(_restgpr_15_x) lwz     15,-68(11)
-+_GLOBAL(_restgpr_16_x) lwz     16,-64(11)
-+_GLOBAL(_restgpr_17_x) lwz     17,-60(11)
-+_GLOBAL(_restgpr_18_x) lwz     18,-56(11)
-+_GLOBAL(_restgpr_19_x) lwz     19,-52(11)
-+_GLOBAL(_restgpr_20_x) lwz     20,-48(11)
-+_GLOBAL(_restgpr_21_x) lwz     21,-44(11)
-+_GLOBAL(_restgpr_22_x) lwz     22,-40(11)
-+_GLOBAL(_restgpr_23_x) lwz     23,-36(11)
-+_GLOBAL(_restgpr_24_x) lwz     24,-32(11)
-+_GLOBAL(_restgpr_25_x) lwz     25,-28(11)
-+_GLOBAL(_restgpr_26_x) lwz     26,-24(11)
-+_GLOBAL(_restgpr_27_x) lwz     27,-20(11)
-+_GLOBAL(_restgpr_28_x) lwz     28,-16(11)
-+_GLOBAL(_restgpr_29_x) lwz     29,-12(11)
-+_GLOBAL(_restgpr_30_x) lwz     30,-8(11)
-+_GLOBAL(_restgpr_31_x) lwz     0,4(11)
-+                       lwz     31,-4(11)
-+                       mtlr    0
-+                       mr      1,11
-+                       blr
-+#endif
---- a/arch/powerpc/kernel/ppc_ksyms.c
-+++ b/arch/powerpc/kernel/ppc_ksyms.c
-@@ -186,3 +186,114 @@ EXPORT_SYMBOL(__mtdcr);
- EXPORT_SYMBOL(__mfdcr);
- #endif
- EXPORT_SYMBOL(empty_zero_page);
-+
-+#if defined(CONFIG_PPC32) && defined(CONFIG_CC_OPTIMIZE_FOR_SIZE)
-+void _savegpr_14(void);
-+void _savegpr_15(void);
-+void _savegpr_16(void);
-+void _savegpr_17(void);
-+void _savegpr_18(void);
-+void _savegpr_19(void);
-+void _savegpr_20(void);
-+void _savegpr_21(void);
-+void _savegpr_22(void);
-+void _savegpr_23(void);
-+void _savegpr_24(void);
-+void _savegpr_25(void);
-+void _savegpr_26(void);
-+void _savegpr_27(void);
-+void _savegpr_28(void);
-+void _savegpr_29(void);
-+void _savegpr_30(void);
-+void _savegpr_31(void);
-+void _restgpr_14(void);
-+void _restgpr_15(void);
-+void _restgpr_16(void);
-+void _restgpr_17(void);
-+void _restgpr_18(void);
-+void _restgpr_19(void);
-+void _restgpr_20(void);
-+void _restgpr_21(void);
-+void _restgpr_22(void);
-+void _restgpr_23(void);
-+void _restgpr_24(void);
-+void _restgpr_25(void);
-+void _restgpr_26(void);
-+void _restgpr_27(void);
-+void _restgpr_28(void);
-+void _restgpr_29(void);
-+void _restgpr_30(void);
-+void _restgpr_31(void);
-+void _restgpr_14_x(void);
-+void _restgpr_15_x(void);
-+void _restgpr_16_x(void);
-+void _restgpr_17_x(void);
-+void _restgpr_18_x(void);
-+void _restgpr_19_x(void);
-+void _restgpr_20_x(void);
-+void _restgpr_21_x(void);
-+void _restgpr_22_x(void);
-+void _restgpr_23_x(void);
-+void _restgpr_24_x(void);
-+void _restgpr_25_x(void);
-+void _restgpr_26_x(void);
-+void _restgpr_27_x(void);
-+void _restgpr_28_x(void);
-+void _restgpr_29_x(void);
-+void _restgpr_30_x(void);
-+void _restgpr_31_x(void);
-+EXPORT_SYMBOL(_savegpr_14);
-+EXPORT_SYMBOL(_savegpr_15);
-+EXPORT_SYMBOL(_savegpr_16);
-+EXPORT_SYMBOL(_savegpr_17);
-+EXPORT_SYMBOL(_savegpr_18);
-+EXPORT_SYMBOL(_savegpr_19);
-+EXPORT_SYMBOL(_savegpr_20);
-+EXPORT_SYMBOL(_savegpr_21);
-+EXPORT_SYMBOL(_savegpr_22);
-+EXPORT_SYMBOL(_savegpr_23);
-+EXPORT_SYMBOL(_savegpr_24);
-+EXPORT_SYMBOL(_savegpr_25);
-+EXPORT_SYMBOL(_savegpr_26);
-+EXPORT_SYMBOL(_savegpr_27);
-+EXPORT_SYMBOL(_savegpr_28);
-+EXPORT_SYMBOL(_savegpr_29);
-+EXPORT_SYMBOL(_savegpr_30);
-+EXPORT_SYMBOL(_savegpr_31);
-+EXPORT_SYMBOL(_restgpr_14);
-+EXPORT_SYMBOL(_restgpr_15);
-+EXPORT_SYMBOL(_restgpr_16);
-+EXPORT_SYMBOL(_restgpr_17);
-+EXPORT_SYMBOL(_restgpr_18);
-+EXPORT_SYMBOL(_restgpr_19);
-+EXPORT_SYMBOL(_restgpr_20);
-+EXPORT_SYMBOL(_restgpr_21);
-+EXPORT_SYMBOL(_restgpr_22);
-+EXPORT_SYMBOL(_restgpr_23);
-+EXPORT_SYMBOL(_restgpr_24);
-+EXPORT_SYMBOL(_restgpr_25);
-+EXPORT_SYMBOL(_restgpr_26);
-+EXPORT_SYMBOL(_restgpr_27);
-+EXPORT_SYMBOL(_restgpr_28);
-+EXPORT_SYMBOL(_restgpr_29);
-+EXPORT_SYMBOL(_restgpr_30);
-+EXPORT_SYMBOL(_restgpr_31);
-+EXPORT_SYMBOL(_restgpr_14_x);
-+EXPORT_SYMBOL(_restgpr_15_x);
-+EXPORT_SYMBOL(_restgpr_16_x);
-+EXPORT_SYMBOL(_restgpr_17_x);
-+EXPORT_SYMBOL(_restgpr_18_x);
-+EXPORT_SYMBOL(_restgpr_19_x);
-+EXPORT_SYMBOL(_restgpr_20_x);
-+EXPORT_SYMBOL(_restgpr_21_x);
-+EXPORT_SYMBOL(_restgpr_22_x);
-+EXPORT_SYMBOL(_restgpr_23_x);
-+EXPORT_SYMBOL(_restgpr_24_x);
-+EXPORT_SYMBOL(_restgpr_25_x);
-+EXPORT_SYMBOL(_restgpr_26_x);
-+EXPORT_SYMBOL(_restgpr_27_x);
-+EXPORT_SYMBOL(_restgpr_28_x);
-+EXPORT_SYMBOL(_restgpr_29_x);
-+EXPORT_SYMBOL(_restgpr_30_x);
-+EXPORT_SYMBOL(_restgpr_31_x);
-+#endif /* CONFIG_PPC32 && CONFIG_CC_OPTIMIZE_FOR_SIZE */

target/linux/generic/patches-2.6.34/040-arm-update-mach-types.patch

@@ -1,720 +0,0 @@
---- a/arch/arm/tools/mach-types
-+++ b/arch/arm/tools/mach-types
-@@ -12,7 +12,7 @@
- #
- #   http://www.arm.linux.org.uk/developer/machines/?action=new
- #
--# Last update: Sat May 1 10:36:42 2010
-+# Last update: Wed Feb 2 22:46:11 2011
- #
- # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
- #
-@@ -1319,7 +1319,7 @@ mistral			MACH_MISTRAL		MISTRAL			1315
- msm			MACH_MSM		MSM			1316
- ct5910			MACH_CT5910		CT5910			1317
- ct5912			MACH_CT5912		CT5912			1318
--hynet_ine		MACH_HYNET_INE		HYNET_INE		1319
-+argonst_mp		MACH_HYNET_INE		HYNET_INE		1319
- hynet_app		MACH_HYNET_APP		HYNET_APP		1320
- msm7200			MACH_MSM7200		MSM7200			1321
- msm7600			MACH_MSM7600		MSM7600			1322
-@@ -1777,7 +1777,7 @@ wdg002			MACH_WDG002		WDG002			1785
- sg560adsl		MACH_SG560ADSL		SG560ADSL		1786
- nextio_n2800_ica	MACH_NEXTIO_N2800_ICA	NEXTIO_N2800_ICA	1787
- dove_db			MACH_DOVE_DB		DOVE_DB			1788
--marvell_newdb		MACH_MARVELL_NEWDB	MARVELL_NEWDB		1789
-+dove_avng		MACH_MARVELL_NEWDB	MARVELL_NEWDB		1789
- vandihud		MACH_VANDIHUD		VANDIHUD		1790
- magx_e8			MACH_MAGX_E8		MAGX_E8			1791
- magx_z6			MACH_MAGX_Z6		MAGX_Z6			1792
-@@ -1877,7 +1877,7 @@ ued			MACH_UED		UED			1885
- esiblade		MACH_ESIBLADE		ESIBLADE		1886
- eye02			MACH_EYE02		EYE02			1887
- imx27kbd		MACH_IMX27KBD		IMX27KBD		1888
--sst61vc010_fpga		MACH_SST61VC010_FPGA	SST61VC010_FPGA		1889
-+p87_fpga		MACH_SST61VC010_FPGA	SST61VC010_FPGA		1889
- kixvp435		MACH_KIXVP435		KIXVP435		1890
- kixnp435		MACH_KIXNP435		KIXNP435		1891
- africa			MACH_AFRICA		AFRICA			1892
-@@ -1994,7 +1994,7 @@ spark			MACH_SPARK		SPARK			2002
- benzina			MACH_BENZINA		BENZINA			2003
- blaze			MACH_BLAZE		BLAZE			2004
- linkstation_ls_hgl	MACH_LINKSTATION_LS_HGL	LINKSTATION_LS_HGL	2005
--htckovsky		MACH_HTCVENUS		HTCVENUS		2006
-+htckovsky		MACH_HTCKOVSKY		HTCKOVSKY		2006
- sony_prs505		MACH_SONY_PRS505	SONY_PRS505		2007
- hanlin_v3		MACH_HANLIN_V3		HANLIN_V3		2008
- sapphira		MACH_SAPPHIRA		SAPPHIRA		2009
-@@ -2240,7 +2240,7 @@ arm_ultimator2		MACH_ARM_ULTIMATOR2	ARM_
- vs_v210			MACH_VS_V210		VS_V210			2252
- vs_v212			MACH_VS_V212		VS_V212			2253
- hmt			MACH_HMT		HMT			2254
--suen3			MACH_SUEN3		SUEN3			2255
-+km_kirkwood		MACH_KM_KIRKWOOD	KM_KIRKWOOD		2255
- vesper			MACH_VESPER		VESPER			2256
- str9			MACH_STR9		STR9			2257
- omap3_wl_ff		MACH_OMAP3_WL_FF	OMAP3_WL_FF		2258
-@@ -2308,7 +2308,7 @@ ecac2378		MACH_ECAC2378		ECAC2378		2319
- tazkiosk		MACH_TAZKIOSK		TAZKIOSK		2320
- whiterabbit_mch		MACH_WHITERABBIT_MCH	WHITERABBIT_MCH		2321
- sbox9263		MACH_SBOX9263		SBOX9263		2322
--oreo			MACH_OREO		OREO			2323
-+oreo_camera		MACH_OREO		OREO			2323
- smdk6442		MACH_SMDK6442		SMDK6442		2324
- openrd_base		MACH_OPENRD_BASE	OPENRD_BASE		2325
- incredible		MACH_INCREDIBLE		INCREDIBLE		2326
-@@ -2321,7 +2321,7 @@ mx31txtr		MACH_MX31TXTR		MX31TXTR		2332
- u380			MACH_U380		U380			2333
- oamp3_hualu		MACH_HUALU_BOARD	HUALU_BOARD		2334
- npcmx50			MACH_NPCMX50		NPCMX50			2335
--mx51_lange51		MACH_MX51_LANGE51	MX51_LANGE51		2336
-+mx51_efikamx		MACH_MX51_EFIKAMX	MX51_EFIKAMX		2336
- mx51_lange52		MACH_MX51_LANGE52	MX51_LANGE52		2337
- riom			MACH_RIOM		RIOM			2338
- comcas			MACH_COMCAS		COMCAS			2339
-@@ -2355,7 +2355,7 @@ at91sam9263cs		MACH_AT91SAM9263CS	AT91SA
- csb732			MACH_CSB732		CSB732			2367
- u8500			MACH_U8500		U8500			2368
- huqiu			MACH_HUQIU		HUQIU			2369
--mx51_kunlun		MACH_MX51_KUNLUN	MX51_KUNLUN		2370
-+mx51_efikasb		MACH_MX51_EFIKASB	MX51_EFIKASB		2370
- pmt1g			MACH_PMT1G		PMT1G			2371
- htcelf			MACH_HTCELF		HTCELF			2372
- armadillo420		MACH_ARMADILLO420	ARMADILLO420		2373
-@@ -2374,7 +2374,7 @@ sch_m490		MACH_SCH_M490		SCH_M490		2386
- rbl01			MACH_RBL01		RBL01			2387
- omnifi			MACH_OMNIFI		OMNIFI			2388
- otavalo			MACH_OTAVALO		OTAVALO			2389
--sienna			MACH_SIENNA		SIENNA			2390
-+siena			MACH_SIENNA		SIENNA			2390
- htc_excalibur_s620	MACH_HTC_EXCALIBUR_S620	HTC_EXCALIBUR_S620	2391
- htc_opal		MACH_HTC_OPAL		HTC_OPAL		2392
- touchbook		MACH_TOUCHBOOK		TOUCHBOOK		2393
-@@ -2446,7 +2446,7 @@ siogentoo1		MACH_SIOGENTOO1		SIOGENTOO1
- siogentoo2		MACH_SIOGENTOO2		SIOGENTOO2		2459
- sm3k			MACH_SM3K		SM3K			2460
- acer_tempo_f900		MACH_ACER_TEMPO_F900	ACER_TEMPO_F900		2461
--sst61vc010_dev		MACH_SST61VC010_DEV	SST61VC010_DEV		2462
-+p87_dev			MACH_SST61VC010_DEV	SST61VC010_DEV		2462
- glittertind		MACH_GLITTERTIND	GLITTERTIND		2463
- omap_zoom3		MACH_OMAP_ZOOM3		OMAP_ZOOM3		2464
- omap_3630sdp		MACH_OMAP_3630SDP	OMAP_3630SDP		2465
-@@ -2498,7 +2498,7 @@ hiram			MACH_HIRAM		HIRAM			2510
- phy3250			MACH_PHY3250		PHY3250			2511
- ea3250			MACH_EA3250		EA3250			2512
- fdi3250			MACH_FDI3250		FDI3250			2513
--whitestone		MACH_WHITESTONE		WHITESTONE		2514
-+htcwhitestone		MACH_WHITESTONE		WHITESTONE		2514
- at91sam9263nit		MACH_AT91SAM9263NIT	AT91SAM9263NIT		2515
- ccmx51			MACH_CCMX51		CCMX51			2516
- ccmx51js		MACH_CCMX51JS		CCMX51JS		2517
-@@ -2561,7 +2561,7 @@ magnolia2		MACH_MAGNOLIA2		MAGNOLIA2		25
- emxx			MACH_EMXX		EMXX			2574
- outlaw			MACH_OUTLAW		OUTLAW			2575
- riot_bei2		MACH_RIOT_BEI2		RIOT_BEI2		2576
--riot_vox		MACH_RIOT_VOX		RIOT_VOX		2577
-+riot_gx2		MACH_RIOT_VOX		RIOT_VOX		2577
- riot_x37		MACH_RIOT_X37		RIOT_X37		2578
- mega25mx		MACH_MEGA25MX		MEGA25MX		2579
- benzina2		MACH_BENZINA2		BENZINA2		2580
-@@ -2582,7 +2582,7 @@ omap3_bulldog		MACH_OMAP3_BULLDOG	OMAP3_
- pca101			MACH_PCA101		PCA101			2595
- buzzc			MACH_BUZZC		BUZZC			2596
- sasie2			MACH_SASIE2		SASIE2			2597
--davinci_cio		MACH_DAVINCI_CIO	DAVINCI_CIO		2598
-+davinci_dm6467_cio	MACH_DAVINCI_CIO	DAVINCI_CIO		2598
- smartmeter_dl		MACH_SMARTMETER_DL	SMARTMETER_DL		2599
- wzl6410			MACH_WZL6410		WZL6410			2600
- wzl6410m		MACH_WZL6410M		WZL6410M		2601
-@@ -2591,7 +2591,7 @@ wzl6410i		MACH_WZL6410I		WZL6410I		2603
- spacecom1		MACH_SPACECOM1		SPACECOM1		2604
- pingu920		MACH_PINGU920		PINGU920		2605
- bravoc			MACH_BRAVOC		BRAVOC			2606
--cybo2440		MACH_CYBO2440		CYBO2440		2607
-+mydev			MACH_CYBO2440		CYBO2440		2607
- vdssw			MACH_VDSSW		VDSSW			2608
- romulus			MACH_ROMULUS		ROMULUS			2609
- omap_magic		MACH_OMAP_MAGIC		OMAP_MAGIC		2610
-@@ -2609,7 +2609,7 @@ fujitsu_tvstbsoc1	MACH_FUJITSU_TVSTBSOC1
- lexikon			MACH_LEXIKON		LEXIKON			2622
- mini2440v2		MACH_MINI2440V2		MINI2440V2		2623
- icontrol		MACH_ICONTROL		ICONTROL		2624
--sheevad			MACH_SHEEVAD		SHEEVAD			2625
-+gplugd			MACH_SHEEVAD		SHEEVAD			2625
- qsd8x50a_st1_1		MACH_QSD8X50A_ST1_1	QSD8X50A_ST1_1		2626
- qsd8x50a_st1_5		MACH_QSD8X50A_ST1_5	QSD8X50A_ST1_5		2627
- bee			MACH_BEE		BEE			2628
-@@ -2622,7 +2622,7 @@ kraken			MACH_KRAKEN		KRAKEN			2634
- gw2388			MACH_GW2388		GW2388			2635
- jadecpu			MACH_JADECPU		JADECPU			2636
- carlisle		MACH_CARLISLE		CARLISLE		2637
--lux_sf9			MACH_LUX_SFT9		LUX_SFT9		2638
-+lux_sf9			MACH_LUX_SF9		LUX_SF9			2638
- nemid_tb		MACH_NEMID_TB		NEMID_TB		2639
- terrier			MACH_TERRIER		TERRIER			2640
- turbot			MACH_TURBOT		TURBOT			2641
-@@ -2683,7 +2683,7 @@ lkevm			MACH_LKEVM		LKEVM			2695
- mw6410			MACH_MW6410		MW6410			2696
- terastation_wxl		MACH_TERASTATION_WXL	TERASTATION_WXL		2697
- cpu8000e		MACH_CPU8000E		CPU8000E		2698
--catania			MACH_CATANIA		CATANIA			2699
-+catania_s		MACH_CATANIA		CATANIA			2699
- tokyo			MACH_TOKYO		TOKYO			2700
- msm7201a_surf		MACH_MSM7201A_SURF	MSM7201A_SURF		2701
- msm7201a_ffa		MACH_MSM7201A_FFA	MSM7201A_FFA		2702
-@@ -2741,7 +2741,7 @@ wbd222			MACH_WBD222		WBD222			2753
- mt65xx			MACH_MT65XX		MT65XX			2754
- msm8x60_surf		MACH_MSM8X60_SURF	MSM8X60_SURF		2755
- msm8x60_sim		MACH_MSM8X60_SIM	MSM8X60_SIM		2756
--vmc300			MACH_VMC300		VMC300			2757
-+cvc600			MACH_VMC300		VMC300			2757
- tcc8000_sdk		MACH_TCC8000_SDK	TCC8000_SDK		2758
- nanos			MACH_NANOS		NANOS			2759
- stamp9g10		MACH_STAMP9G10		STAMP9G10		2760
-@@ -2750,7 +2750,7 @@ h6053			MACH_H6053		H6053			2762
- smint01			MACH_SMINT01		SMINT01			2763
- prtlvt2			MACH_PRTLVT2		PRTLVT2			2764
- ap420			MACH_AP420		AP420			2765
--htcshift		MACH_HTCSHIFT		HTCSHIFT		2766
-+htcclio			MACH_HTCSHIFT		HTCSHIFT		2766
- davinci_dm365_fc	MACH_DAVINCI_DM365_FC	DAVINCI_DM365_FC	2767
- msm8x55_surf		MACH_MSM8X55_SURF	MSM8X55_SURF		2768
- msm8x55_ffa		MACH_MSM8X55_FFA	MSM8X55_FFA		2769
-@@ -2761,7 +2761,7 @@ oreo_controller		MACH_OREO_CONTROLLER	OR
- kopin_models		MACH_KOPIN_MODELS	KOPIN_MODELS		2774
- ttc_vision2		MACH_TTC_VISION2	TTC_VISION2		2775
- cns3420vb		MACH_CNS3420VB		CNS3420VB		2776
--lpc2			MACH_LPC2		LPC2			2777
-+lpc_evo			MACH_LPC2		LPC2			2777
- olympus			MACH_OLYMPUS		OLYMPUS			2778
- vortex			MACH_VORTEX		VORTEX			2779
- s5pc200			MACH_S5PC200		S5PC200			2780
-@@ -2788,7 +2788,7 @@ ti8168evm		MACH_TI8168EVM		TI8168EVM		28
- neocoreomap		MACH_NEOCOREOMAP	NEOCOREOMAP		2801
- withings_wbp		MACH_WITHINGS_WBP	WITHINGS_WBP		2802
- dbps			MACH_DBPS		DBPS			2803
--sbc9261			MACH_SBC9261		SBC9261			2804
-+at91sam9261		MACH_SBC9261		SBC9261			2804
- pcbfp0001		MACH_PCBFP0001		PCBFP0001		2805
- speedy			MACH_SPEEDY		SPEEDY			2806
- chrysaor		MACH_CHRYSAOR		CHRYSAOR		2807
-@@ -2804,3 +2804,519 @@ teton_bga		MACH_TETON_BGA		TETON_BGA		28
- snapper9g45		MACH_SNAPPER9G45	SNAPPER9G45		2817
- tam3517			MACH_TAM3517		TAM3517			2818
- pdc100			MACH_PDC100		PDC100			2819
-+eukrea_cpuimx25sd	MACH_EUKREA_CPUIMX25	EUKREA_CPUIMX25		2820
-+eukrea_cpuimx35sd	MACH_EUKREA_CPUIMX35	EUKREA_CPUIMX35		2821
-+eukrea_cpuimx51sd	MACH_EUKREA_CPUIMX51SD	EUKREA_CPUIMX51SD	2822
-+eukrea_cpuimx51		MACH_EUKREA_CPUIMX51	EUKREA_CPUIMX51		2823
-+p565			MACH_P565		P565			2824
-+acer_a4			MACH_ACER_A4		ACER_A4			2825
-+davinci_dm368_bip	MACH_DAVINCI_DM368_BIP	DAVINCI_DM368_BIP	2826
-+eshare			MACH_ESHARE		ESHARE			2827
-+omapl138_europa		MACH_HW_OMAPL138_EUROPA	HW_OMAPL138_EUROPA	2828
-+wlbargn			MACH_WLBARGN		WLBARGN			2829
-+bm170			MACH_BM170		BM170			2830
-+netspace_mini_v2	MACH_NETSPACE_MINI_V2	NETSPACE_MINI_V2	2831
-+netspace_plug_v2	MACH_NETSPACE_PLUG_V2	NETSPACE_PLUG_V2	2832
-+siemens_l1		MACH_SIEMENS_L1		SIEMENS_L1		2833
-+elv_lcu1		MACH_ELV_LCU1		ELV_LCU1		2834
-+mcu1			MACH_MCU1		MCU1			2835
-+omap3_tao3530		MACH_OMAP3_TAO3530	OMAP3_TAO3530		2836
-+omap3_pcutouch		MACH_OMAP3_PCUTOUCH	OMAP3_PCUTOUCH		2837
-+smdkc210		MACH_SMDKC210		SMDKC210		2838
-+omap3_braillo		MACH_OMAP3_BRAILLO	OMAP3_BRAILLO		2839
-+spyplug			MACH_SPYPLUG		SPYPLUG			2840
-+ginger			MACH_GINGER		GINGER			2841
-+tny_t3530		MACH_TNY_T3530		TNY_T3530		2842
-+pca102			MACH_PCA102		PCA102			2843
-+spade			MACH_SPADE		SPADE			2844
-+mxc25_topaz		MACH_MXC25_TOPAZ	MXC25_TOPAZ		2845
-+t5325			MACH_T5325		T5325			2846
-+gw2361			MACH_GW2361		GW2361			2847
-+elog			MACH_ELOG		ELOG			2848
-+income			MACH_INCOME		INCOME			2849
-+bcm589x			MACH_BCM589X		BCM589X			2850
-+etna			MACH_ETNA		ETNA			2851
-+hawks			MACH_HAWKS		HAWKS			2852
-+meson			MACH_MESON		MESON			2853
-+xsbase255		MACH_XSBASE255		XSBASE255		2854
-+pvm2030			MACH_PVM2030		PVM2030			2855
-+mioa502			MACH_MIOA502		MIOA502			2856
-+vvbox_sdorig2		MACH_VVBOX_SDORIG2	VVBOX_SDORIG2		2857
-+vvbox_sdlite2		MACH_VVBOX_SDLITE2	VVBOX_SDLITE2		2858
-+vvbox_sdpro4		MACH_VVBOX_SDPRO4	VVBOX_SDPRO4		2859
-+htc_spv_m700		MACH_HTC_SPV_M700	HTC_SPV_M700		2860
-+mx257sx			MACH_MX257SX		MX257SX			2861
-+goni			MACH_GONI		GONI			2862
-+msm8x55_svlte_ffa	MACH_MSM8X55_SVLTE_FFA	MSM8X55_SVLTE_FFA	2863
-+msm8x55_svlte_surf	MACH_MSM8X55_SVLTE_SURF	MSM8X55_SVLTE_SURF	2864
-+quickstep		MACH_QUICKSTEP		QUICKSTEP		2865
-+dmw96			MACH_DMW96		DMW96			2866
-+hammerhead		MACH_HAMMERHEAD		HAMMERHEAD		2867
-+trident			MACH_TRIDENT		TRIDENT			2868
-+lightning		MACH_LIGHTNING		LIGHTNING		2869
-+iconnect		MACH_ICONNECT		ICONNECT		2870
-+autobot			MACH_AUTOBOT		AUTOBOT			2871
-+coconut			MACH_COCONUT		COCONUT			2872
-+durian			MACH_DURIAN		DURIAN			2873
-+cayenne			MACH_CAYENNE		CAYENNE			2874
-+fuji			MACH_FUJI		FUJI			2875
-+synology_6282		MACH_SYNOLOGY_6282	SYNOLOGY_6282		2876
-+em1sy			MACH_EM1SY		EM1SY			2877
-+m502			MACH_M502		M502			2878
-+matrix518		MACH_MATRIX518		MATRIX518		2879
-+tiny_gurnard		MACH_TINY_GURNARD	TINY_GURNARD		2880
-+spear1310		MACH_SPEAR1310		SPEAR1310		2881
-+bv07			MACH_BV07		BV07			2882
-+mxt_td61		MACH_MXT_TD61		MXT_TD61		2883
-+openrd_ultimate		MACH_OPENRD_ULTIMATE	OPENRD_ULTIMATE		2884
-+devixp			MACH_DEVIXP		DEVIXP			2885
-+miccpt			MACH_MICCPT		MICCPT			2886
-+mic256			MACH_MIC256		MIC256			2887
-+as1167			MACH_AS1167		AS1167			2888
-+omap3_ibiza		MACH_OMAP3_IBIZA	OMAP3_IBIZA		2889
-+u5500			MACH_U5500		U5500			2890
-+davinci_picto		MACH_DAVINCI_PICTO	DAVINCI_PICTO		2891
-+mecha			MACH_MECHA		MECHA			2892
-+bubba3			MACH_BUBBA3		BUBBA3			2893
-+pupitre			MACH_PUPITRE		PUPITRE			2894
-+tegra_unused		MACH_TEGRA_HARMONY	TEGRA_HARMONY		2895
-+tegra_vogue		MACH_TEGRA_VOGUE	TEGRA_VOGUE		2896
-+tegra_e1165		MACH_TEGRA_E1165	TEGRA_E1165		2897
-+simplenet		MACH_SIMPLENET		SIMPLENET		2898
-+ec4350tbm		MACH_EC4350TBM		EC4350TBM		2899
-+pec_tc			MACH_PEC_TC		PEC_TC			2900
-+pec_hc2			MACH_PEC_HC2		PEC_HC2			2901
-+esl_mobilis_a		MACH_ESL_MOBILIS_A	ESL_MOBILIS_A		2902
-+esl_mobilis_b		MACH_ESL_MOBILIS_B	ESL_MOBILIS_B		2903
-+esl_wave_a		MACH_ESL_WAVE_A		ESL_WAVE_A		2904
-+esl_wave_b		MACH_ESL_WAVE_B		ESL_WAVE_B		2905
-+unisense_mmm		MACH_UNISENSE_MMM	UNISENSE_MMM		2906
-+blueshark		MACH_BLUESHARK		BLUESHARK		2907
-+e10			MACH_E10		E10			2908
-+app3k_robin		MACH_APP3K_ROBIN	APP3K_ROBIN		2909
-+pov15hd			MACH_POV15HD		POV15HD			2910
-+stella			MACH_STELLA		STELLA			2911
-+htc_iolite		MACH_MACH_HTC_IOLITE	MACH_HTC_IOLITE		2912
-+linkstation_lschl	MACH_LINKSTATION_LSCHL	LINKSTATION_LSCHL	2913
-+netwalker		MACH_NETWALKER		NETWALKER		2914
-+acsx106			MACH_ACSX106		ACSX106			2915
-+atlas5_c1		MACH_ATLAS5_C1		ATLAS5_C1		2916
-+nsb3ast			MACH_NSB3AST		NSB3AST			2917
-+gnet_slc		MACH_GNET_SLC		GNET_SLC		2918
-+af4000			MACH_AF4000		AF4000			2919
-+ark9431			MACH_ARK9431		ARK9431			2920
-+fs_s5pc100		MACH_FS_S5PC100		FS_S5PC100		2921
-+omap3505nova8		MACH_OMAP3505NOVA8	OMAP3505NOVA8		2922
-+omap3621_edp1		MACH_OMAP3621_EDP1	OMAP3621_EDP1		2923
-+oratisaes		MACH_ORATISAES		ORATISAES		2924
-+smdkv310		MACH_SMDKV310		SMDKV310		2925
-+siemens_l0		MACH_SIEMENS_L0		SIEMENS_L0		2926
-+ventana			MACH_VENTANA		VENTANA			2927
-+wm8505_7in_netbook	MACH_WM8505_7IN_NETBOOK	WM8505_7IN_NETBOOK	2928
-+ec4350sdb		MACH_EC4350SDB		EC4350SDB		2929
-+mimas			MACH_MIMAS		MIMAS			2930
-+titan			MACH_TITAN		TITAN			2931
-+craneboard		MACH_CRANEBOARD		CRANEBOARD		2932
-+es2440			MACH_ES2440		ES2440			2933
-+najay_a9263		MACH_NAJAY_A9263	NAJAY_A9263		2934
-+htctornado		MACH_HTCTORNADO		HTCTORNADO		2935
-+dimm_mx257		MACH_DIMM_MX257		DIMM_MX257		2936
-+jigen301		MACH_JIGEN		JIGEN			2937
-+smdk6450		MACH_SMDK6450		SMDK6450		2938
-+meno_qng		MACH_MENO_QNG		MENO_QNG		2939
-+ns2416			MACH_NS2416		NS2416			2940
-+rpc353			MACH_RPC353		RPC353			2941
-+tq6410			MACH_TQ6410		TQ6410			2942
-+sky6410			MACH_SKY6410		SKY6410			2943
-+dynasty			MACH_DYNASTY		DYNASTY			2944
-+vivo			MACH_VIVO		VIVO			2945
-+bury_bl7582		MACH_BURY_BL7582	BURY_BL7582		2946
-+bury_bps5270		MACH_BURY_BPS5270	BURY_BPS5270		2947
-+basi			MACH_BASI		BASI			2948
-+tn200			MACH_TN200		TN200			2949
-+c2mmi			MACH_C2MMI		C2MMI			2950
-+meson_6236m		MACH_MESON_6236M	MESON_6236M		2951
-+meson_8626m		MACH_MESON_8626M	MESON_8626M		2952
-+tube			MACH_TUBE		TUBE			2953
-+messina			MACH_MESSINA		MESSINA			2954
-+mx50_arm2		MACH_MX50_ARM2		MX50_ARM2		2955
-+cetus9263		MACH_CETUS9263		CETUS9263		2956
-+brownstone		MACH_BROWNSTONE		BROWNSTONE		2957
-+vmx25			MACH_VMX25		VMX25			2958
-+vmx51			MACH_VMX51		VMX51			2959
-+abacus			MACH_ABACUS		ABACUS			2960
-+cm4745			MACH_CM4745		CM4745			2961
-+oratislink		MACH_ORATISLINK		ORATISLINK		2962
-+davinci_dm365_dvr	MACH_DAVINCI_DM365_DVR	DAVINCI_DM365_DVR	2963
-+netviz			MACH_NETVIZ		NETVIZ			2964
-+flexibity		MACH_FLEXIBITY		FLEXIBITY		2965
-+wlan_computer		MACH_WLAN_COMPUTER	WLAN_COMPUTER		2966
-+lpc24xx			MACH_LPC24XX		LPC24XX			2967
-+spica			MACH_SPICA		SPICA			2968
-+gpsdisplay		MACH_GPSDISPLAY		GPSDISPLAY		2969
-+bipnet			MACH_BIPNET		BIPNET			2970
-+overo_ctu_inertial	MACH_OVERO_CTU_INERTIAL	OVERO_CTU_INERTIAL	2971
-+davinci_dm355_mmm	MACH_DAVINCI_DM355_MMM	DAVINCI_DM355_MMM	2972
-+pc9260_v2		MACH_PC9260_V2		PC9260_V2		2973
-+ptx7545			MACH_PTX7545		PTX7545			2974
-+tm_efdc			MACH_TM_EFDC		TM_EFDC			2975
-+remove_me		MACH_WALDO1		WALDO1			2976
-+omap3_waldo1		MACH_OMAP3_WALDO1	OMAP3_WALDO1		2977
-+flyer			MACH_FLYER		FLYER			2978
-+tornado3240		MACH_TORNADO3240	TORNADO3240		2979
-+soli_01			MACH_SOLI_01		SOLI_01			2980
-+omapl138_europalc	MACH_OMAPL138_EUROPALC	OMAPL138_EUROPALC	2981
-+helios_v1		MACH_HELIOS_V1		HELIOS_V1		2982
-+netspace_lite_v2	MACH_NETSPACE_LITE_V2	NETSPACE_LITE_V2	2983
-+ssc			MACH_SSC		SSC			2984
-+premierwave_en		MACH_PREMIERWAVE_EN	PREMIERWAVE_EN		2985
-+wasabi			MACH_WASABI		WASABI			2986
-+vivo_w			MACH_VIVOW		VIVOW			2987
-+mx50_rdp		MACH_MX50_RDP		MX50_RDP		2988
-+universal_c210		MACH_UNIVERSAL_C210	UNIVERSAL_C210		2989
-+real6410		MACH_REAL6410		REAL6410		2990
-+spx_sakura		MACH_SPX_SAKURA		SPX_SAKURA		2991
-+ij3k_2440		MACH_IJ3K_2440		IJ3K_2440		2992
-+omap3_bc10		MACH_OMAP3_BC10		OMAP3_BC10		2993
-+thebe			MACH_THEBE		THEBE			2994
-+rv082			MACH_RV082		RV082			2995
-+armlguest		MACH_ARMLGUEST		ARMLGUEST		2996
-+tjinc1000		MACH_TJINC1000		TJINC1000		2997
-+dockstar		MACH_DOCKSTAR		DOCKSTAR		2998
-+ax8008			MACH_AX8008		AX8008			2999
-+gnet_sgce		MACH_GNET_SGCE		GNET_SGCE		3000
-+pxwnas_500_1000		MACH_PXWNAS_500_1000	PXWNAS_500_1000		3001
-+ea20			MACH_EA20		EA20			3002
-+awm2			MACH_AWM2		AWM2			3003
-+ti8148evm		MACH_TI8148EVM		TI8148EVM		3004
-+seaboard		MACH_SEABOARD		SEABOARD		3005
-+linkstation_chlv2	MACH_LINKSTATION_CHLV2	LINKSTATION_CHLV2	3006
-+tera_pro2_rack		MACH_TERA_PRO2_RACK	TERA_PRO2_RACK		3007
-+rubys			MACH_RUBYS		RUBYS			3008
-+aquarius		MACH_AQUARIUS		AQUARIUS		3009
-+mx53_ard		MACH_MX53_ARD		MX53_ARD		3010
-+mx53_smd		MACH_MX53_SMD		MX53_SMD		3011
-+lswxl			MACH_LSWXL		LSWXL			3012
-+dove_avng_v3		MACH_DOVE_AVNG_V3	DOVE_AVNG_V3		3013
-+sdi_ess_9263		MACH_SDI_ESS_9263	SDI_ESS_9263		3014
-+jocpu550		MACH_JOCPU550		JOCPU550		3015
-+msm8x60_rumi3		MACH_MSM8X60_RUMI3	MSM8X60_RUMI3		3016
-+msm8x60_ffa		MACH_MSM8X60_FFA	MSM8X60_FFA		3017
-+yanomami		MACH_YANOMAMI		YANOMAMI		3018
-+gta04			MACH_GTA04		GTA04			3019
-+cm_a510			MACH_CM_A510		CM_A510			3020
-+omap3_rfs200		MACH_OMAP3_RFS200	OMAP3_RFS200		3021
-+kx33xx			MACH_KX33XX		KX33XX			3022
-+ptx7510			MACH_PTX7510		PTX7510			3023
-+top9000			MACH_TOP9000		TOP9000			3024
-+teenote			MACH_TEENOTE		TEENOTE			3025
-+ts3			MACH_TS3		TS3			3026
-+a0			MACH_A0			A0			3027
-+fsm9xxx_surf		MACH_FSM9XXX_SURF	FSM9XXX_SURF		3028
-+fsm9xxx_ffa		MACH_FSM9XXX_FFA	FSM9XXX_FFA		3029
-+frrhwcdma60w		MACH_FRRHWCDMA60W	FRRHWCDMA60W		3030
-+remus			MACH_REMUS		REMUS			3031
-+at91cap7xdk		MACH_AT91CAP7XDK	AT91CAP7XDK		3032
-+at91cap7stk		MACH_AT91CAP7STK	AT91CAP7STK		3033
-+kt_sbc_sam9_1		MACH_KT_SBC_SAM9_1	KT_SBC_SAM9_1		3034
-+at91sam9263router	MACH_ORATISROUTER	ORATISROUTER		3035
-+armada_xp_db		MACH_ARMADA_XP_DB	ARMADA_XP_DB		3036
-+spdm			MACH_SPDM		SPDM			3037
-+gtib			MACH_GTIB		GTIB			3038
-+dgm3240			MACH_DGM3240		DGM3240			3039
-+iv_atlas_i_lpe		MACH_ATLAS_I_LPE	ATLAS_I_LPE		3040
-+htcmega			MACH_HTCMEGA		HTCMEGA			3041
-+tricorder		MACH_TRICORDER		TRICORDER		3042
-+tx28			MACH_TX28		TX28			3043
-+bstbrd			MACH_BSTBRD		BSTBRD			3044
-+pwb3090			MACH_PWB3090		PWB3090			3045
-+idea6410		MACH_IDEA6410		IDEA6410		3046
-+qbc9263			MACH_QBC9263		QBC9263			3047
-+borabora		MACH_BORABORA		BORABORA		3048
-+valdez			MACH_VALDEZ		VALDEZ			3049
-+ls9g20			MACH_LS9G20		LS9G20			3050
-+mios_v1			MACH_MIOS_V1		MIOS_V1			3051
-+s5pc110_crespo		MACH_S5PC110_CRESPO	S5PC110_CRESPO		3052
-+controltek9g20		MACH_CONTROLTEK9G20	CONTROLTEK9G20		3053
-+tin307			MACH_TIN307		TIN307			3054
-+tin510			MACH_TIN510		TIN510			3055
-+ep3505			MACH_EP3517		EP3517			3056
-+bluecheese		MACH_BLUECHEESE		BLUECHEESE		3057
-+tem3x30			MACH_TEM3X30		TEM3X30			3058
-+harvest_desoto		MACH_HARVEST_DESOTO	HARVEST_DESOTO		3059
-+msm8x60_qrdc		MACH_MSM8X60_QRDC	MSM8X60_QRDC		3060
-+spear900		MACH_SPEAR900		SPEAR900		3061
-+pcontrol_g20		MACH_PCONTROL_G20	PCONTROL_G20		3062
-+rdstor			MACH_RDSTOR		RDSTOR			3063
-+usdloader		MACH_USDLOADER		USDLOADER		3064
-+tsoploader		MACH_TSOPLOADER		TSOPLOADER		3065
-+kronos			MACH_KRONOS		KRONOS			3066
-+ffcore			MACH_FFCORE		FFCORE			3067
-+mone			MACH_MONE		MONE			3068
-+unit2s			MACH_UNIT2S		UNIT2S			3069
-+acer_a5			MACH_ACER_A5		ACER_A5			3070
-+etherpro_isp		MACH_ETHERPRO_ISP	ETHERPRO_ISP		3071
-+stretchs7000		MACH_STRETCHS7000	STRETCHS7000		3072
-+p87_smartsim		MACH_P87_SMARTSIM	P87_SMARTSIM		3073
-+tulip			MACH_TULIP		TULIP			3074
-+sunflower		MACH_SUNFLOWER		SUNFLOWER		3075
-+rib			MACH_RIB		RIB			3076
-+clod			MACH_CLOD		CLOD			3077
-+rump			MACH_RUMP		RUMP			3078
-+tenderloin		MACH_TENDERLOIN		TENDERLOIN		3079
-+shortloin		MACH_SHORTLOIN		SHORTLOIN		3080
-+roml1			MACH_CRESPO		CRESPO			3081
-+antares			MACH_ANTARES		ANTARES			3082
-+wb40n			MACH_WB40N		WB40N			3083
-+herring			MACH_HERRING		HERRING			3084
-+naxy400			MACH_NAXY400		NAXY400			3085
-+naxy1200		MACH_NAXY1200		NAXY1200		3086
-+vpr200			MACH_VPR200		VPR200			3087
-+bug20			MACH_BUG20		BUG20			3088
-+goflexnet		MACH_GOFLEXNET		GOFLEXNET		3089
-+torbreck		MACH_TORBRECK		TORBRECK		3090
-+saarb_mg1		MACH_SAARB_MG1		SAARB_MG1		3091
-+callisto		MACH_CALLISTO		CALLISTO		3092
-+multhsu			MACH_MULTHSU		MULTHSU			3093
-+saluda			MACH_SALUDA		SALUDA			3094
-+pemp_omap3_apollo	MACH_PEMP_OMAP3_APOLLO	PEMP_OMAP3_APOLLO	3095
-+vc0718			MACH_VC0718		VC0718			3096
-+mvblx			MACH_MVBLX		MVBLX			3097
-+inhand_apeiron		MACH_INHAND_APEIRON	INHAND_APEIRON		3098
-+inhand_fury		MACH_INHAND_FURY	INHAND_FURY		3099
-+inhand_siren		MACH_INHAND_SIREN	INHAND_SIREN		3100
-+hdnvp			MACH_HDNVP		HDNVP			3101
-+softwinner		MACH_SOFTWINNER		SOFTWINNER		3102
-+prima2_evb		MACH_PRIMA2_EVB		PRIMA2_EVB		3103
-+nas6210			MACH_NAS6210		NAS6210			3104
-+unisdev			MACH_UNISDEV		UNISDEV			3105
-+sbca11			MACH_SBCA11		SBCA11			3106
-+saga			MACH_SAGA		SAGA			3107
-+ns_k330			MACH_NS_K330		NS_K330			3108
-+tanna			MACH_TANNA		TANNA			3109
-+imate8502		MACH_IMATE8502		IMATE8502		3110
-+aspen			MACH_ASPEN		ASPEN			3111
-+daintree_cwac		MACH_DAINTREE_CWAC	DAINTREE_CWAC		3112
-+zmx25			MACH_ZMX25		ZMX25			3113
-+maple1			MACH_MAPLE1		MAPLE1			3114
-+qsd8x72_surf		MACH_QSD8X72_SURF	QSD8X72_SURF		3115
-+qsd8x72_ffa		MACH_QSD8X72_FFA	QSD8X72_FFA		3116
-+abilene			MACH_ABILENE		ABILENE			3117
-+eigen_ttr		MACH_EIGEN_TTR		EIGEN_TTR		3118
-+iomega_ix2_200		MACH_IOMEGA_IX2_200	IOMEGA_IX2_200		3119
-+coretec_vcx7400		MACH_CORETEC_VCX7400	CORETEC_VCX7400		3120
-+santiago		MACH_SANTIAGO		SANTIAGO		3121
-+mx257sol		MACH_MX257SOL		MX257SOL		3122
-+strasbourg		MACH_STRASBOURG		STRASBOURG		3123
-+msm8x60_fluid		MACH_MSM8X60_FLUID	MSM8X60_FLUID		3124
-+smartqv5		MACH_SMARTQV5		SMARTQV5		3125
-+smartqv3		MACH_SMARTQV3		SMARTQV3		3126
-+smartqv7		MACH_SMARTQV7		SMARTQV7		3127
-+tegra_paz00		MACH_PAZ00		PAZ00			3128
-+acmenetusfoxg20		MACH_ACMENETUSFOXG20	ACMENETUSFOXG20		3129
-+htc_willow		MACH_HTCWILLOW		HTCWILLOW		3130
-+fwbd_0404		MACH_FWBD_0404		FWBD_0404		3131
-+hdgu			MACH_HDGU		HDGU			3132
-+pyramid			MACH_PYRAMID		PYRAMID			3133
-+epiphan			MACH_EPIPHAN		EPIPHAN			3134
-+omap_bender		MACH_OMAP_BENDER	OMAP_BENDER		3135
-+gurnard			MACH_GURNARD		GURNARD			3136
-+gtl_it5100		MACH_GTL_IT5100		GTL_IT5100		3137
-+bcm2708			MACH_BCM2708		BCM2708			3138
-+mx51_ggc		MACH_MX51_GGC		MX51_GGC		3139
-+sharespace		MACH_SHARESPACE		SHARESPACE		3140
-+haba_knx_explorer	MACH_HABA_KNX_EXPLORER	HABA_KNX_EXPLORER	3141
-+simtec_kirkmod		MACH_SIMTEC_KIRKMOD	SIMTEC_KIRKMOD		3142
-+crux			MACH_CRUX		CRUX			3143
-+mx51_bravo		MACH_MX51_BRAVO		MX51_BRAVO		3144
-+charon			MACH_CHARON		CHARON			3145
-+picocom3		MACH_PICOCOM3		PICOCOM3		3146
-+picocom4		MACH_PICOCOM4		PICOCOM4		3147
-+serrano			MACH_SERRANO		SERRANO			3148
-+doubleshot		MACH_DOUBLESHOT		DOUBLESHOT		3149
-+evsy			MACH_EVSY		EVSY			3150
-+huashan			MACH_HUASHAN		HUASHAN			3151
-+lausanne		MACH_LAUSANNE		LAUSANNE		3152
-+emerald			MACH_EMERALD		EMERALD			3153
-+tqma35			MACH_TQMA35		TQMA35			3154
-+marvel			MACH_MARVEL		MARVEL			3155
-+manuae			MACH_MANUAE		MANUAE			3156
-+chacha			MACH_CHACHA		CHACHA			3157
-+lemon			MACH_LEMON		LEMON			3158
-+csc			MACH_CSC		CSC			3159
-+gira_knxip_router	MACH_GIRA_KNXIP_ROUTER	GIRA_KNXIP_ROUTER	3160
-+t20			MACH_T20		T20			3161
-+hdmini			MACH_HDMINI		HDMINI			3162
-+sciphone_g2		MACH_SCIPHONE_G2	SCIPHONE_G2		3163
-+express			MACH_EXPRESS		EXPRESS			3164
-+express_kt		MACH_EXPRESS_KT		EXPRESS_KT		3165
-+maximasp		MACH_MAXIMASP		MAXIMASP		3166
-+nitrogen_imx51		MACH_NITROGEN_IMX51	NITROGEN_IMX51		3167
-+nitrogen_imx53		MACH_NITROGEN_IMX53	NITROGEN_IMX53		3168
-+sunfire			MACH_SUNFIRE		SUNFIRE			3169
-+arowana			MACH_AROWANA		AROWANA			3170
-+tegra_daytona		MACH_TEGRA_DAYTONA	TEGRA_DAYTONA		3171
-+tegra_swordfish		MACH_TEGRA_SWORDFISH	TEGRA_SWORDFISH		3172
-+edison			MACH_EDISON		EDISON			3173
-+svp8500v1		MACH_SVP8500V1		SVP8500V1		3174
-+svp8500v2		MACH_SVP8500V2		SVP8500V2		3175
-+svp5500			MACH_SVP5500		SVP5500			3176
-+b5500			MACH_B5500		B5500			3177
-+s5500			MACH_S5500		S5500			3178
-+icon			MACH_ICON		ICON			3179
-+elephant		MACH_ELEPHANT		ELEPHANT		3180
-+msm8x60_charm_surf	MACH_MSM8X60_FUSION	MSM8X60_FUSION		3181
-+shooter			MACH_SHOOTER		SHOOTER			3182
-+spade_lte		MACH_SPADE_LTE		SPADE_LTE		3183
-+philhwani		MACH_PHILHWANI		PHILHWANI		3184
-+gsncomm			MACH_GSNCOMM		GSNCOMM			3185
-+strasbourg_a2		MACH_STRASBOURG_A2	STRASBOURG_A2		3186
-+mmm			MACH_MMM		MMM			3187
-+davinci_dm365_bv	MACH_DAVINCI_DM365_BV	DAVINCI_DM365_BV	3188
-+ag5evm			MACH_AG5EVM		AG5EVM			3189
-+sc575plc		MACH_SC575PLC		SC575PLC		3190
-+sc575hmi		MACH_SC575IPC		SC575IPC		3191
-+omap3_tdm3730		MACH_OMAP3_TDM3730	OMAP3_TDM3730		3192
-+rover_g7		MACH_G7			G7			3193
-+top9000_eval		MACH_TOP9000_EVAL	TOP9000_EVAL		3194
-+top9000_su		MACH_TOP9000_SU		TOP9000_SU		3195
-+utm300			MACH_UTM300		UTM300			3196
-+tsunagi			MACH_TSUNAGI		TSUNAGI			3197
-+ts75xx			MACH_TS75XX		TS75XX			3198
-+msm8x60_charm_ffa	MACH_MSM8X60_FUSN_FFA	MSM8X60_FUSN_FFA	3199
-+ts47xx			MACH_TS47XX		TS47XX			3200
-+da850_k5		MACH_DA850_K5		DA850_K5		3201
-+ax502			MACH_AX502		AX502			3202
-+igep0032		MACH_IGEP0032		IGEP0032		3203
-+antero			MACH_ANTERO		ANTERO			3204
-+synergy			MACH_SYNERGY		SYNERGY			3205
-+ics_if_voip		MACH_ICS_IF_VOIP	ICS_IF_VOIP		3206
-+wlf_cragg_6410		MACH_WLF_CRAGG_6410	WLF_CRAGG_6410		3207
-+punica			MACH_PUNICA		PUNICA			3208
-+trimslice		MACH_SBC_NT250		SBC_NT250		3209
-+mx27_wmultra		MACH_MX27_WMULTRA	MX27_WMULTRA		3210
-+mackerel		MACH_MACKEREL		MACKEREL		3211
-+pvd_imx27		MACH_MACH_PVD_IMX27	MACH_PVD_IMX27		3212
-+fa9x27			MACH_FA9X27		FA9X27			3213
-+ns2816tb		MACH_NS2816TB		NS2816TB		3214
-+ns2816_ntpad		MACH_NS2816_NTPAD	NS2816_NTPAD		3215
-+ns2816_ntnb		MACH_NS2816_NTNB	NS2816_NTNB		3216
-+kaen			MACH_KAEN		KAEN			3217
-+nv1000			MACH_NV1000		NV1000			3218
-+nuc950ts		MACH_NUC950TS		NUC950TS		3219
-+nokia_rm680		MACH_NOKIA_RM680	NOKIA_RM680		3220
-+ast2200			MACH_AST2200		AST2200			3221
-+lead			MACH_LEAD		LEAD			3222
-+unino1			MACH_UNINO1		UNINO1			3223
-+greeco			MACH_GREECO		GREECO			3224
-+verdi			MACH_VERDI		VERDI			3225
-+dm6446_adbox		MACH_DM6446_ADBOX	DM6446_ADBOX		3226
-+quad_salsa		MACH_QUAD_SALSA		QUAD_SALSA		3227
-+abb_gma_1_1		MACH_ABB_GMA_1_1	ABB_GMA_1_1		3228
-+svcid			MACH_SVCID		SVCID			3229
-+msm8960_sim		MACH_MSM8960_SIM	MSM8960_SIM		3230
-+msm8960_rumi3		MACH_MSM8960_RUMI3	MSM8960_RUMI3		3231
-+icon_g			MACH_ICON_G		ICON_G			3232
-+mb3			MACH_MB3		MB3			3233
-+gsia18s			MACH_GSIA18S		GSIA18S			3234
-+pivicc			MACH_PIVICC		PIVICC			3235
-+pcm048			MACH_PCM048		PCM048			3236
-+dds			MACH_DDS		DDS			3237
-+chalten_xa1		MACH_CHALTEN_XA1	CHALTEN_XA1		3238
-+ts48xx			MACH_TS48XX		TS48XX			3239
-+tonga2_tfttimer		MACH_TONGA2_TFTTIMER	TONGA2_TFTTIMER		3240
-+whistler		MACH_WHISTLER		WHISTLER		3241
-+asl_phoenix		MACH_ASL_PHOENIX	ASL_PHOENIX		3242
-+at91sam9263otlite	MACH_AT91SAM9263OTLITE	AT91SAM9263OTLITE	3243
-+ddplug			MACH_DDPLUG		DDPLUG			3244
-+d2plug			MACH_D2PLUG		D2PLUG			3245
-+kzm9d			MACH_KZM9D		KZM9D			3246
-+verdi_lte		MACH_VERDI_LTE		VERDI_LTE		3247
-+nanozoom		MACH_NANOZOOM		NANOZOOM		3248
-+dm3730_som_lv		MACH_DM3730_SOM_LV	DM3730_SOM_LV		3249
-+dm3730_torpedo		MACH_DM3730_TORPEDO	DM3730_TORPEDO		3250
-+anchovy			MACH_ANCHOVY		ANCHOVY			3251
-+linux			MACH_LINUX		LINUX			3252
-+re2rev20		MACH_RE2REV20		RE2REV20		3253
-+re2rev21		MACH_RE2REV21		RE2REV21		3254
-+cns21xx			MACH_CNS21XX		CNS21XX			3255
-+rider			MACH_RIDER		RIDER			3257
-+nsk330			MACH_NSK330		NSK330			3258
-+cns2133evb		MACH_CNS2133EVB		CNS2133EVB		3259
-+z3_816x_mod		MACH_Z3_816X_MOD	Z3_816X_MOD		3260
-+z3_814x_mod		MACH_Z3_814X_MOD	Z3_814X_MOD		3261
-+beect			MACH_BEECT		BEECT			3262
-+dma_thunderbug		MACH_DMA_THUNDERBUG	DMA_THUNDERBUG		3263
-+omn_at91sam9g20		MACH_OMN_AT91SAM9G20	OMN_AT91SAM9G20		3264
-+mx25_e2s_uc		MACH_MX25_E2S_UC	MX25_E2S_UC		3265
-+mione			MACH_MIONE		MIONE			3266
-+top9000_tcu		MACH_TOP9000_TCU	TOP9000_TCU		3267
-+top9000_bsl		MACH_TOP9000_BSL	TOP9000_BSL		3268
-+kingdom			MACH_KINGDOM		KINGDOM			3269
-+armadillo460		MACH_ARMADILLO460	ARMADILLO460		3270
-+lq2			MACH_LQ2		LQ2			3271
-+sweda_tms2		MACH_SWEDA_TMS2		SWEDA_TMS2		3272
-+mx53_loco		MACH_MX53_LOCO		MX53_LOCO		3273
-+acer_a7			MACH_MACH_ACER_A7	MACH_ACER_A7		3274
-+acer_a8			MACH_ACER_A8		ACER_A8			3275
-+acer_gauguin		MACH_ACER_GAUGUIN	ACER_GAUGUIN		3276
-+guppy			MACH_GUPPY		GUPPY			3277
-+mx61_ard		MACH_MX61_ARD		MX61_ARD		3278
-+tx53			MACH_TX53		TX53			3279
-+omapl138_case_a3	MACH_OMAPL138_CASE_A3	OMAPL138_CASE_A3	3280
-+uemd			MACH_UEMD		UEMD			3281
-+ccwmx51mut		MACH_CCWMX51MUT		CCWMX51MUT		3282
-+rockhopper		MACH_ROCKHOPPER		ROCKHOPPER		3283
-+nookcolor		MACH_NOOKCOLOR		NOOKCOLOR		3284
-+hkdkc100		MACH_HKDKC100		HKDKC100		3285
-+ts42xx			MACH_TS42XX		TS42XX			3286
-+aebl			MACH_AEBL		AEBL			3287
-+wario			MACH_WARIO		WARIO			3288
-+gfs_spm			MACH_GFS_SPM		GFS_SPM			3289
-+cm_t3730		MACH_CM_T3730		CM_T3730		3290
-+isc3			MACH_ISC3		ISC3			3291
-+rascal			MACH_RASCAL		RASCAL			3292
-+hrefv60			MACH_HREFV60		HREFV60			3293
-+tpt_2_0			MACH_TPT_2_0		TPT_2_0			3294
-+pyramid_td		MACH_PYRAMID_TD		PYRAMID_TD		3295
-+splendor		MACH_SPLENDOR		SPLENDOR		3296
-+guf_planet		MACH_GUF_PLANET		GUF_PLANET		3297
-+msm8x60_qt		MACH_MSM8X60_QT		MSM8X60_QT		3298
-+htc_hd_mini		MACH_HTC_HD_MINI	HTC_HD_MINI		3299
-+athene			MACH_ATHENE		ATHENE			3300
-+deep_r_ek_1		MACH_DEEP_R_EK_1	DEEP_R_EK_1		3301
-+vivow_ct		MACH_VIVOW_CT		VIVOW_CT		3302
-+nery_1000		MACH_NERY_1000		NERY_1000		3303
-+rfl109145_ssrv		MACH_RFL109145_SSRV	RFL109145_SSRV		3304
-+nmh			MACH_NMH		NMH			3305
-+wn802t			MACH_WN802T		WN802T			3306
-+dragonet		MACH_DRAGONET		DRAGONET		3307
-+geneva_b		MACH_GENEVA_B		GENEVA_B		3308
-+at91sam9263desk16l	MACH_AT91SAM9263DESK16L	AT91SAM9263DESK16L	3309
-+bcmhana_sv		MACH_BCMHANA_SV		BCMHANA_SV		3310
-+bcmhana_tablet		MACH_BCMHANA_TABLET	BCMHANA_TABLET		3311
-+koi			MACH_KOI		KOI			3312
-+ts4800			MACH_TS4800		TS4800			3313
-+tqma9263		MACH_TQMA9263		TQMA9263		3314
-+holiday			MACH_HOLIDAY		HOLIDAY			3315
-+dma_6410		MACH_DMA6410		DMA6410			3316
-+pcats_overlay		MACH_PCATS_OVERLAY	PCATS_OVERLAY		3317
-+hwgw6410		MACH_HWGW6410		HWGW6410		3318
-+shenzhou		MACH_SHENZHOU		SHENZHOU		3319
-+cwme9210		MACH_CWME9210		CWME9210		3320
-+cwme9210js		MACH_CWME9210JS		CWME9210JS		3321
-+pgs_v1			MACH_PGS_SITARA		PGS_SITARA		3322
-+colibri_tegra2		MACH_COLIBRI_TEGRA2	COLIBRI_TEGRA2		3323
-+w21			MACH_W21		W21			3324
-+polysat1		MACH_POLYSAT1		POLYSAT1		3325
-+dataway			MACH_DATAWAY		DATAWAY			3326
-+cobral138		MACH_COBRAL138		COBRAL138		3327
-+roverpcs8		MACH_ROVERPCS8		ROVERPCS8		3328
-+marvelc			MACH_MARVELC		MARVELC			3329
-+navefihid		MACH_NAVEFIHID		NAVEFIHID		3330
-+dm365_cv100		MACH_DM365_CV100	DM365_CV100		3331
-+able			MACH_ABLE		ABLE			3332
-+legacy			MACH_LEGACY		LEGACY			3333
-+icong			MACH_ICONG		ICONG			3334
-+rover_g8		MACH_ROVER_G8		ROVER_G8		3335
-+t5388p			MACH_T5388P		T5388P			3336

target/linux/generic/patches-2.6.34/040-compcache_swap_notify_core_support.patch

@@ -1,30 +0,0 @@
---- a/include/linux/blkdev.h
-+++ b/include/linux/blkdev.h
-@@ -1287,6 +1287,8 @@ struct block_device_operations {
- 						unsigned long long);
- 	int (*revalidate_disk) (struct gendisk *);
- 	int (*getgeo)(struct block_device *, struct hd_geometry *);
-+        /* this callback is with swap_lock and sometimes page table lock held */
-+        void (*swap_slot_free_notify) (struct block_device *, unsigned long);
- 	struct module *owner;
- };
- 
---- a/mm/swapfile.c
-+++ b/mm/swapfile.c
-@@ -576,6 +576,7 @@ static unsigned char swap_entry_free(str
- 
- 	/* free if no reference */
- 	if (!usage) {
-+		struct gendisk *disk = p->bdev->bd_disk;
- 		if (offset < p->lowest_bit)
- 			p->lowest_bit = offset;
- 		if (offset > p->highest_bit)
-@@ -585,6 +586,8 @@ static unsigned char swap_entry_free(str
- 			swap_list.next = p->type;
- 		nr_swap_pages++;
- 		p->inuse_pages--;
-+		if (disk->fops->swap_slot_free_notify)
-+			disk->fops->swap_slot_free_notify(p->bdev, offset);
- 	}
- 
- 	return usage;

target/linux/generic/patches-2.6.34/055-lzma_arm_kernel.patch

@@ -1,57 +0,0 @@
-From d0f226a0f104c7d1da1d215b8013359273e39e18 Mon Sep 17 00:00:00 2001
-From: Albin Tonnerre <[email protected]>
-Date: Fri, 16 Oct 2009 16:17:22 +0200
-Subject: [PATCH] Add LZMA decompression on ARM
-
-
-Signed-off-by: Albin Tonnerre <[email protected]>
----
- arch/arm/Kconfig                      |    1 +
- arch/arm/boot/compressed/Makefile     |    1 +
- arch/arm/boot/compressed/misc.c       |    4 ++++
- arch/arm/boot/compressed/piggy.lzma.S |    6 ++++++
- 4 files changed, 12 insertions(+), 0 deletions(-)
- create mode 100644 arch/arm/boot/compressed/piggy.lzma.S
-
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -21,6 +21,7 @@ config ARM
- 	select HAVE_GENERIC_DMA_COHERENT
- 	select HAVE_KERNEL_GZIP
- 	select HAVE_KERNEL_LZO
-+	select HAVE_KERNEL_LZMA
- 	select HAVE_PERF_EVENTS
- 	select PERF_USE_VMALLOC
- 	help
---- a/arch/arm/boot/compressed/Makefile
-+++ b/arch/arm/boot/compressed/Makefile
-@@ -65,6 +65,7 @@ SEDFLAGS	= s/TEXT_START/$(ZTEXTADDR)/;s/
- 
- suffix_$(CONFIG_KERNEL_GZIP) = gzip
- suffix_$(CONFIG_KERNEL_LZO)  = lzo
-+suffix_$(CONFIG_KERNEL_LZMA) = lzma
- 
- targets       := vmlinux vmlinux.lds \
- 		 piggy.$(suffix_y) piggy.$(suffix_y).o \
---- a/arch/arm/boot/compressed/decompress.c
-+++ b/arch/arm/boot/compressed/decompress.c
-@@ -40,6 +40,10 @@ extern void error(char *);
- #include "../../../../lib/decompress_unlzo.c"
- #endif
- 
-+#ifdef CONFIG_KERNEL_LZMA
-+#include "../../../../lib/decompress_unlzma.c"
-+#endif
-+
- void do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x))
- {
- 	decompress(input, len, NULL, NULL, output, NULL, error);
---- /dev/null
-+++ b/arch/arm/boot/compressed/piggy.lzma.S
-@@ -0,0 +1,6 @@
-+	.section .piggydata,#alloc
-+	.globl	input_data
-+input_data:
-+	.incbin	"arch/arm/boot/compressed/piggy.lzma"
-+	.globl	input_data_end
-+input_data_end:

target/linux/generic/patches-2.6.34/060-block2mtd_init.patch

@@ -1,120 +0,0 @@
---- a/drivers/mtd/devices/block2mtd.c
-+++ b/drivers/mtd/devices/block2mtd.c
-@@ -14,6 +14,7 @@
- #include <linux/list.h>
- #include <linux/init.h>
- #include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
- #include <linux/buffer_head.h>
- #include <linux/mutex.h>
- #include <linux/mount.h>
-@@ -233,10 +234,11 @@ static void block2mtd_free_device(struct
- 
- 
- /* FIXME: ensure that mtd->size % erase_size == 0 */
--static struct block2mtd_dev *add_device(char *devname, int erase_size)
-+static struct block2mtd_dev *add_device(char *devname, int erase_size, const char *mtdname)
- {
- 	struct block_device *bdev;
- 	struct block2mtd_dev *dev;
-+	struct mtd_partition *part;
- 	char *name;
- 
- 	if (!devname)
-@@ -274,17 +276,17 @@ static struct block2mtd_dev *add_device(
- 
- 	mutex_init(&dev->write_mutex);
- 
--	/* Setup the MTD structure */
--	/* make the name contain the block device in */
--	name = kmalloc(sizeof("block2mtd: ") + strlen(devname) + 1,
--			GFP_KERNEL);
-+	if (!mtdname)
-+		mtdname = devname;
-+
-+	name = kmalloc(strlen(mtdname) + 1, GFP_KERNEL);
- 	if (!name)
- 		goto devinit_err;
- 
--	sprintf(name, "block2mtd: %s", devname);
-+	strcpy(name, mtdname);
- 	dev->mtd.name = name;
- 
--	dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK;
-+	dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK & ~(erase_size - 1);
- 	dev->mtd.erasesize = erase_size;
- 	dev->mtd.writesize = 1;
- 	dev->mtd.type = MTD_RAM;
-@@ -297,14 +299,17 @@ static struct block2mtd_dev *add_device(
- 	dev->mtd.priv = dev;
- 	dev->mtd.owner = THIS_MODULE;
- 
--	if (add_mtd_device(&dev->mtd)) {
-+	part = kzalloc(sizeof(struct mtd_partition), GFP_KERNEL);
-+	part->name = dev->mtd.name;
-+	part->offset = 0;
-+	part->size = dev->mtd.size;
-+	if (add_mtd_partitions(&dev->mtd, part, 1)) {
- 		/* Device didnt get added, so free the entry */
- 		goto devinit_err;
- 	}
- 	list_add(&dev->list, &blkmtd_device_list);
- 	INFO("mtd%d: [%s] erase_size = %dKiB [%d]", dev->mtd.index,
--			dev->mtd.name + strlen("block2mtd: "),
--			dev->mtd.erasesize >> 10, dev->mtd.erasesize);
-+			mtdname, dev->mtd.erasesize >> 10, dev->mtd.erasesize);
- 	return dev;
- 
- devinit_err:
-@@ -377,9 +382,9 @@ static char block2mtd_paramline[80 + 12]
- 
- static int block2mtd_setup2(const char *val)
- {
--	char buf[80 + 12]; /* 80 for device, 12 for erase size */
-+	char buf[80 + 12 + 80]; /* 80 for device, 12 for erase size, 80 for name */
- 	char *str = buf;
--	char *token[2];
-+	char *token[3];
- 	char *name;
- 	size_t erase_size = PAGE_SIZE;
- 	int i, ret;
-@@ -390,7 +395,7 @@ static int block2mtd_setup2(const char *
- 	strcpy(str, val);
- 	kill_final_newline(str);
- 
--	for (i = 0; i < 2; i++)
-+	for (i = 0; i < 3; i++)
- 		token[i] = strsep(&str, ",");
- 
- 	if (str)
-@@ -409,8 +414,10 @@ static int block2mtd_setup2(const char *
- 			parse_err("illegal erase size");
- 		}
- 	}
-+	if (token[2] && (strlen(token[2]) + 1 > 80))
-+		parse_err("mtd device name too long");
- 
--	add_device(name, erase_size);
-+	add_device(name, erase_size, token[2]);
- 
- 	return 0;
- }
-@@ -444,7 +451,7 @@ static int block2mtd_setup(const char *v
- 
- 
- module_param_call(block2mtd, block2mtd_setup, NULL, NULL, 0200);
--MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>]\"");
-+MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>[,<name>]]\"");
- 
- static int __init block2mtd_init(void)
- {
---- a/fs/partitions/check.c
-+++ b/fs/partitions/check.c
-@@ -639,6 +639,7 @@ try_scan:
- 	kfree(state);
- 	return 0;
- }
-+EXPORT_SYMBOL(rescan_partitions);
- 
- unsigned char *read_dev_sector(struct block_device *bdev, sector_t n, Sector *p)
- {

target/linux/generic/patches-2.6.34/065-rootfs_split.patch

@@ -1,625 +0,0 @@
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -53,6 +53,16 @@ config MTD_PARTITIONS
- 	  devices. Partitioning on NFTL 'devices' is a different - that's the
- 	  'normal' form of partitioning used on a block device.
- 
-+config MTD_ROOTFS_ROOT_DEV
-+	bool "Automatically set 'rootfs' partition to be root filesystem"
-+	depends on MTD_PARTITIONS
-+	default y
-+
-+config MTD_ROOTFS_SPLIT
-+	bool "Automatically split 'rootfs' partition for squashfs"
-+	depends on MTD_PARTITIONS
-+	default y
-+
- config MTD_REDBOOT_PARTS
- 	tristate "RedBoot partition table parsing"
- 	depends on MTD_PARTITIONS
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -18,6 +18,8 @@
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
- #include <linux/mtd/compatmac.h>
-+#include <linux/root_dev.h>
-+#include <linux/magic.h>
- 
- /* Our partition linked list */
- static LIST_HEAD(mtd_partitions);
-@@ -35,7 +37,7 @@ struct mtd_part {
-  * the pointer to that structure with this macro.
-  */
- #define PART(x)  ((struct mtd_part *)(x))
--
-+#define IS_PART(mtd) (mtd->read == part_read)
- 
- /*
-  * MTD methods which simply translate the effective address and pass through
-@@ -503,6 +505,150 @@ out_register:
- 	return slave;
- }
- 
-+#ifdef CONFIG_MTD_ROOTFS_SPLIT
-+#define ROOTFS_SPLIT_NAME "rootfs_data"
-+#define ROOTFS_REMOVED_NAME "<removed>"
-+
-+struct squashfs_super_block {
-+	__le32 s_magic;
-+	__le32 pad0[9];
-+	__le64 bytes_used;
-+};
-+
-+
-+static int split_squashfs(struct mtd_info *master, int offset, int *split_offset)
-+{
-+	struct squashfs_super_block sb;
-+	int len, ret;
-+
-+	ret = master->read(master, offset, sizeof(sb), &len, (void *) &sb);
-+	if (ret || (len != sizeof(sb))) {
-+		printk(KERN_ALERT "split_squashfs: error occured while reading "
-+			"from \"%s\"\n", master->name);
-+		return -EINVAL;
-+	}
-+
-+	if (SQUASHFS_MAGIC != le32_to_cpu(sb.s_magic) ) {
-+		printk(KERN_ALERT "split_squashfs: no squashfs found in \"%s\"\n",
-+			master->name);
-+		*split_offset = 0;
-+		return 0;
-+	}
-+
-+	if (le64_to_cpu((sb.bytes_used)) <= 0) {
-+		printk(KERN_ALERT "split_squashfs: squashfs is empty in \"%s\"\n",
-+			master->name);
-+		*split_offset = 0;
-+		return 0;
-+	}
-+
-+	len = (u32) le64_to_cpu(sb.bytes_used);
-+	len += (offset & 0x000fffff);
-+	len +=  (master->erasesize - 1);
-+	len &= ~(master->erasesize - 1);
-+	len -= (offset & 0x000fffff);
-+	*split_offset = offset + len;
-+
-+	return 0;
-+}
-+
-+static int split_rootfs_data(struct mtd_info *master, struct mtd_info *rpart, const struct mtd_partition *part)
-+{
-+	struct mtd_partition *dpart;
-+	struct mtd_part *slave = NULL;
-+	int split_offset = 0;
-+	int ret;
-+
-+	ret = split_squashfs(master, part->offset, &split_offset);
-+	if (ret)
-+		return ret;
-+
-+	if (split_offset <= 0)
-+		return 0;
-+
-+	dpart = kmalloc(sizeof(*part)+sizeof(ROOTFS_SPLIT_NAME)+1, GFP_KERNEL);
-+	if (dpart == NULL) {
-+		printk(KERN_INFO "split_squashfs: no memory for partition \"%s\"\n",
-+			ROOTFS_SPLIT_NAME);
-+		return -ENOMEM;
-+	}
-+
-+	memcpy(dpart, part, sizeof(*part));
-+	dpart->name = (unsigned char *)&dpart[1];
-+	strcpy(dpart->name, ROOTFS_SPLIT_NAME);
-+
-+	dpart->size -= split_offset - dpart->offset;
-+	dpart->offset = split_offset;
-+
-+	if (dpart == NULL)
-+		return 1;
-+
-+	printk(KERN_INFO "mtd: partition \"%s\" created automatically, ofs=%llX, len=%llX \n",
-+		ROOTFS_SPLIT_NAME, dpart->offset, dpart->size);
-+
-+	slave = add_one_partition(master, dpart, 0, split_offset);
-+	if (!slave) {
-+		kfree(dpart);
-+		return -ENOMEM;
-+	}
-+	rpart->split = &slave->mtd;
-+
-+	return 0;
-+}
-+
-+static int refresh_rootfs_split(struct mtd_info *mtd)
-+{
-+	struct mtd_partition tpart;
-+	struct mtd_part *part;
-+	char *name;
-+	//int index = 0;
-+	int offset, size;
-+	int ret;
-+
-+	part = PART(mtd);
-+
-+	/* check for the new squashfs offset first */
-+	ret = split_squashfs(part->master, part->offset, &offset);
-+	if (ret)
-+		return ret;
-+
-+	if ((offset > 0) && !mtd->split) {
-+		printk(KERN_INFO "%s: creating new split partition for \"%s\"\n", __func__, mtd->name);
-+		/* if we don't have a rootfs split partition, create a new one */
-+		tpart.name = (char *) mtd->name;
-+		tpart.size = mtd->size;
-+		tpart.offset = part->offset;
-+
-+		return split_rootfs_data(part->master, &part->mtd, &tpart);
-+	} else if ((offset > 0) && mtd->split) {
-+		/* update the offsets of the existing partition */
-+		size = mtd->size + part->offset - offset;
-+
-+		part = PART(mtd->split);
-+		part->offset = offset;
-+		part->mtd.size = size;
-+		printk(KERN_INFO "%s: %s partition \"" ROOTFS_SPLIT_NAME "\", offset: 0x%06x (0x%06x)\n",
-+			__func__, (!strcmp(part->mtd.name, ROOTFS_SPLIT_NAME) ? "updating" : "creating"),
-+			(u32) part->offset, (u32) part->mtd.size);
-+		name = kmalloc(sizeof(ROOTFS_SPLIT_NAME) + 1, GFP_KERNEL);
-+		strcpy(name, ROOTFS_SPLIT_NAME);
-+		part->mtd.name = name;
-+	} else if ((offset <= 0) && mtd->split) {
-+		printk(KERN_INFO "%s: removing partition \"%s\"\n", __func__, mtd->split->name);
-+
-+		/* mark existing partition as removed */
-+		part = PART(mtd->split);
-+		name = kmalloc(sizeof(ROOTFS_SPLIT_NAME) + 1, GFP_KERNEL);
-+		strcpy(name, ROOTFS_REMOVED_NAME);
-+		part->mtd.name = name;
-+		part->offset = 0;
-+		part->mtd.size = 0;
-+	}
-+
-+	return 0;
-+}
-+#endif /* CONFIG_MTD_ROOTFS_SPLIT */
-+
- /*
-  * This function, given a master MTD object and a partition table, creates
-  * and registers slave MTD objects which are bound to the master according to
-@@ -518,7 +664,7 @@ int add_mtd_partitions(struct mtd_info *
- {
- 	struct mtd_part *slave;
- 	uint64_t cur_offset = 0;
--	int i;
-+	int i, ret;
- 
- 	printk(KERN_NOTICE "Creating %d MTD partitions on \"%s\":\n", nbparts, master->name);
- 
-@@ -526,6 +672,21 @@ int add_mtd_partitions(struct mtd_info *
- 		slave = add_one_partition(master, parts + i, i, cur_offset);
- 		if (!slave)
- 			return -ENOMEM;
-+
-+		if (!strcmp(parts[i].name, "rootfs")) {
-+#ifdef CONFIG_MTD_ROOTFS_ROOT_DEV
-+			if (ROOT_DEV == 0) {
-+				printk(KERN_NOTICE "mtd: partition \"rootfs\" "
-+					"set to be root filesystem\n");
-+				ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, slave->mtd.index);
-+			}
-+#endif
-+#ifdef CONFIG_MTD_ROOTFS_SPLIT
-+			ret = split_rootfs_data(master, &slave->mtd, &parts[i]);
-+			/* if (ret == 0)
-+				j++; */
-+#endif
-+		}
- 		cur_offset = slave->offset + slave->mtd.size;
- 	}
- 
-@@ -533,6 +694,32 @@ int add_mtd_partitions(struct mtd_info *
- }
- EXPORT_SYMBOL(add_mtd_partitions);
- 
-+int refresh_mtd_partitions(struct mtd_info *mtd)
-+{
-+	int ret = 0;
-+
-+	if (IS_PART(mtd)) {
-+		struct mtd_part *part;
-+		struct mtd_info *master;
-+
-+		part = PART(mtd);
-+		master = part->master;
-+		if (master->refresh_device)
-+			ret = master->refresh_device(master);
-+	}
-+
-+	if (!ret && mtd->refresh_device)
-+		ret = mtd->refresh_device(mtd);
-+
-+#ifdef CONFIG_MTD_ROOTFS_SPLIT
-+	if (!ret && IS_PART(mtd) && !strcmp(mtd->name, "rootfs"))
-+		refresh_rootfs_split(mtd);
-+#endif
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL_GPL(refresh_mtd_partitions);
-+
- static DEFINE_SPINLOCK(part_parser_lock);
- static LIST_HEAD(part_parsers);
- 
---- a/drivers/mtd/devices/block2mtd.c
-+++ b/drivers/mtd/devices/block2mtd.c
-@@ -30,6 +30,8 @@ struct block2mtd_dev {
- 	struct block_device *blkdev;
- 	struct mtd_info mtd;
- 	struct mutex write_mutex;
-+	rwlock_t bdev_mutex;
-+	char devname[0];
- };
- 
- 
-@@ -82,6 +84,12 @@ static int block2mtd_erase(struct mtd_in
- 	size_t len = instr->len;
- 	int err;
- 
-+	read_lock(&dev->bdev_mutex);
-+	if (!dev->blkdev) {
-+		err = -EINVAL;
-+		goto done;
-+	}
-+
- 	instr->state = MTD_ERASING;
- 	mutex_lock(&dev->write_mutex);
- 	err = _block2mtd_erase(dev, from, len);
-@@ -94,6 +102,10 @@ static int block2mtd_erase(struct mtd_in
- 
- 	instr->state = MTD_ERASE_DONE;
- 	mtd_erase_callback(instr);
-+
-+done:
-+	read_unlock(&dev->bdev_mutex);
-+
- 	return err;
- }
- 
-@@ -105,10 +117,14 @@ static int block2mtd_read(struct mtd_inf
- 	struct page *page;
- 	int index = from >> PAGE_SHIFT;
- 	int offset = from & (PAGE_SIZE-1);
--	int cpylen;
-+	int cpylen, err = 0;
-+
-+	read_lock(&dev->bdev_mutex);
-+	if (!dev->blkdev || (from > mtd->size)) {
-+		err = -EINVAL;
-+		goto done;
-+	}
- 
--	if (from > mtd->size)
--		return -EINVAL;
- 	if (from + len > mtd->size)
- 		len = mtd->size - from;
- 
-@@ -123,10 +139,14 @@ static int block2mtd_read(struct mtd_inf
- 		len = len - cpylen;
- 
- 		page = page_read(dev->blkdev->bd_inode->i_mapping, index);
--		if (!page)
--			return -ENOMEM;
--		if (IS_ERR(page))
--			return PTR_ERR(page);
-+		if (!page) {
-+			err = -ENOMEM;
-+			goto done;
-+		}
-+		if (IS_ERR(page)) {
-+			err = PTR_ERR(page);
-+			goto done;
-+		}
- 
- 		memcpy(buf, page_address(page) + offset, cpylen);
- 		page_cache_release(page);
-@@ -137,7 +157,10 @@ static int block2mtd_read(struct mtd_inf
- 		offset = 0;
- 		index++;
- 	}
--	return 0;
-+
-+done:
-+	read_unlock(&dev->bdev_mutex);
-+	return err;
- }
- 
- 
-@@ -189,12 +212,22 @@ static int block2mtd_write(struct mtd_in
- 		size_t *retlen, const u_char *buf)
- {
- 	struct block2mtd_dev *dev = mtd->priv;
--	int err;
-+	int err = 0;
-+
-+	read_lock(&dev->bdev_mutex);
-+	if (!dev->blkdev) {
-+		err = -EINVAL;
-+		goto done;
-+	}
- 
- 	if (!len)
--		return 0;
--	if (to >= mtd->size)
--		return -ENOSPC;
-+		goto done;
-+
-+	if (to >= mtd->size) {
-+		err = -ENOSPC;
-+		goto done;
-+	}
-+
- 	if (to + len > mtd->size)
- 		len = mtd->size - to;
- 
-@@ -203,6 +236,9 @@ static int block2mtd_write(struct mtd_in
- 	mutex_unlock(&dev->write_mutex);
- 	if (err > 0)
- 		err = 0;
-+
-+done:
-+	read_unlock(&dev->bdev_mutex);
- 	return err;
- }
- 
-@@ -211,52 +247,29 @@ static int block2mtd_write(struct mtd_in
- static void block2mtd_sync(struct mtd_info *mtd)
- {
- 	struct block2mtd_dev *dev = mtd->priv;
--	sync_blockdev(dev->blkdev);
--	return;
--}
--
--
--static void block2mtd_free_device(struct block2mtd_dev *dev)
--{
--	if (!dev)
--		return;
--
--	kfree(dev->mtd.name);
- 
--	if (dev->blkdev) {
--		invalidate_mapping_pages(dev->blkdev->bd_inode->i_mapping,
--					0, -1);
--		close_bdev_exclusive(dev->blkdev, FMODE_READ|FMODE_WRITE);
--	}
-+	read_lock(&dev->bdev_mutex);
-+	if (dev->blkdev)
-+		sync_blockdev(dev->blkdev);
-+	read_unlock(&dev->bdev_mutex);
- 
--	kfree(dev);
-+	return;
- }
- 
- 
--/* FIXME: ensure that mtd->size % erase_size == 0 */
--static struct block2mtd_dev *add_device(char *devname, int erase_size, const char *mtdname)
-+static int _open_bdev(struct block2mtd_dev *dev)
- {
- 	struct block_device *bdev;
--	struct block2mtd_dev *dev;
--	struct mtd_partition *part;
--	char *name;
--
--	if (!devname)
--		return NULL;
--
--	dev = kzalloc(sizeof(struct block2mtd_dev), GFP_KERNEL);
--	if (!dev)
--		return NULL;
- 
- 	/* Get a handle on the device */
--	bdev = open_bdev_exclusive(devname, FMODE_READ|FMODE_WRITE, NULL);
-+	bdev = open_bdev_exclusive(dev->devname, FMODE_READ|FMODE_WRITE, NULL);
- #ifndef MODULE
- 	if (IS_ERR(bdev)) {
- 
- 		/* We might not have rootfs mounted at this point. Try
- 		   to resolve the device name by other means. */
- 
--		dev_t devt = name_to_dev_t(devname);
-+		dev_t devt = name_to_dev_t(dev->devname);
- 		if (devt) {
- 			bdev = open_by_devnum(devt, FMODE_WRITE | FMODE_READ);
- 		}
-@@ -264,17 +277,98 @@ static struct block2mtd_dev *add_device(
- #endif
- 
- 	if (IS_ERR(bdev)) {
--		ERROR("error: cannot open device %s", devname);
--		goto devinit_err;
-+		ERROR("error: cannot open device %s", dev->devname);
-+		return 1;
- 	}
- 	dev->blkdev = bdev;
- 
- 	if (MAJOR(bdev->bd_dev) == MTD_BLOCK_MAJOR) {
- 		ERROR("attempting to use an MTD device as a block device");
--		goto devinit_err;
-+		return 1;
- 	}
- 
-+	return 0;
-+}
-+
-+static void _close_bdev(struct block2mtd_dev *dev)
-+{
-+	struct block_device *bdev;
-+
-+	if (!dev->blkdev)
-+		return;
-+
-+	bdev = dev->blkdev;
-+	invalidate_mapping_pages(dev->blkdev->bd_inode->i_mapping, 0, -1);
-+	close_bdev_exclusive(dev->blkdev, FMODE_READ|FMODE_WRITE);
-+	dev->blkdev = NULL;
-+}
-+
-+static void block2mtd_free_device(struct block2mtd_dev *dev)
-+{
-+	if (!dev)
-+		return;
-+
-+	kfree(dev->mtd.name);
-+	_close_bdev(dev);
-+	kfree(dev);
-+}
-+
-+
-+static int block2mtd_refresh(struct mtd_info *mtd)
-+{
-+	struct block2mtd_dev *dev = mtd->priv;
-+	struct block_device *bdev;
-+	dev_t devt;
-+	int err = 0;
-+
-+	/* no other mtd function can run at this point */
-+	write_lock(&dev->bdev_mutex);
-+
-+	/* get the device number for the whole disk */
-+	devt = MKDEV(MAJOR(dev->blkdev->bd_dev), 0);
-+
-+	/* close the old block device */
-+	_close_bdev(dev);
-+
-+	/* open the whole disk, issue a partition rescan, then */
-+	bdev = open_by_devnum(devt, FMODE_WRITE | FMODE_READ);
-+	if (!bdev || !bdev->bd_disk)
-+		err = -EINVAL;
-+#ifndef CONFIG_MTD_BLOCK2MTD_MODULE
-+	else
-+		err = rescan_partitions(bdev->bd_disk, bdev);
-+#endif
-+	if (bdev)
-+		close_bdev_exclusive(bdev, FMODE_READ|FMODE_WRITE);
-+
-+	/* try to open the partition block device again */
-+	_open_bdev(dev);
-+	write_unlock(&dev->bdev_mutex);
-+
-+	return err;
-+}
-+
-+/* FIXME: ensure that mtd->size % erase_size == 0 */
-+static struct block2mtd_dev *add_device(char *devname, int erase_size, char *mtdname)
-+{
-+	struct block2mtd_dev *dev;
-+	struct mtd_partition *part;
-+	char *name;
-+
-+	if (!devname)
-+		return NULL;
-+
-+	dev = kzalloc(sizeof(struct block2mtd_dev) + strlen(devname) + 1, GFP_KERNEL);
-+	if (!dev)
-+		return NULL;
-+
-+	strcpy(dev->devname, devname);
-+
-+	if (_open_bdev(dev))
-+		goto devinit_err;
-+
- 	mutex_init(&dev->write_mutex);
-+	rwlock_init(&dev->bdev_mutex);
- 
- 	if (!mtdname)
- 		mtdname = devname;
-@@ -298,6 +392,7 @@ static struct block2mtd_dev *add_device(
- 	dev->mtd.read = block2mtd_read;
- 	dev->mtd.priv = dev;
- 	dev->mtd.owner = THIS_MODULE;
-+	dev->mtd.refresh_device = block2mtd_refresh;
- 
- 	part = kzalloc(sizeof(struct mtd_partition), GFP_KERNEL);
- 	part->name = dev->mtd.name;
---- a/drivers/mtd/mtdchar.c
-+++ b/drivers/mtd/mtdchar.c
-@@ -18,6 +18,7 @@
- 
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/compatmac.h>
-+#include <linux/mtd/partitions.h>
- 
- #include <asm/uaccess.h>
- 
-@@ -814,6 +815,13 @@ static int mtd_ioctl(struct inode *inode
- 		file->f_pos = 0;
- 		break;
- 	}
-+#ifdef CONFIG_MTD_PARTITIONS
-+	case MTDREFRESH:
-+	{
-+		ret = refresh_mtd_partitions(mtd);
-+		break;
-+	}
-+#endif
- 
- 	default:
- 		ret = -ENOTTY;
---- a/include/linux/mtd/mtd.h
-+++ b/include/linux/mtd/mtd.h
-@@ -101,6 +101,7 @@ struct mtd_oob_ops {
- 	uint8_t		*oobbuf;
- };
- 
-+struct mtd_info;
- struct mtd_info {
- 	u_char type;
- 	uint32_t flags;
-@@ -241,6 +242,9 @@ struct mtd_info {
- 	struct device dev;
- 	int usecount;
- 
-+	int (*refresh_device)(struct mtd_info *mtd);
-+	struct mtd_info *split;
-+
- 	/* If the driver is something smart, like UBI, it may need to maintain
- 	 * its own reference counting. The below functions are only for driver.
- 	 * The driver may register its callbacks. These callbacks are not
---- a/include/linux/mtd/partitions.h
-+++ b/include/linux/mtd/partitions.h
-@@ -34,12 +34,14 @@
-  * erasesize aligned (e.g. use MTDPART_OFS_NEXTBLK).
-  */
- 
-+struct mtd_partition;
- struct mtd_partition {
- 	char *name;			/* identifier string */
- 	uint64_t size;			/* partition size */
- 	uint64_t offset;		/* offset within the master MTD space */
- 	uint32_t mask_flags;		/* master MTD flags to mask out for this partition */
- 	struct nand_ecclayout *ecclayout;	/* out of band layout for this partition (NAND only)*/
-+	int (*refresh_partition)(struct mtd_info *);
- };
- 
- #define MTDPART_OFS_NXTBLK	(-2)
-@@ -51,6 +53,7 @@ struct mtd_info;
- 
- int add_mtd_partitions(struct mtd_info *, const struct mtd_partition *, int);
- int del_mtd_partitions(struct mtd_info *);
-+int refresh_mtd_partitions(struct mtd_info *);
- 
- /*
-  * Functions dealing with the various ways of partitioning the space
---- a/include/mtd/mtd-abi.h
-+++ b/include/mtd/mtd-abi.h
-@@ -110,6 +110,7 @@ struct otp_info {
- #define MEMERASE64		_IOW('M', 20, struct erase_info_user64)
- #define MEMWRITEOOB64		_IOWR('M', 21, struct mtd_oob_buf64)
- #define MEMREADOOB64		_IOWR('M', 22, struct mtd_oob_buf64)
-+#define MTDREFRESH		_IO('M', 23)
- 
- /*
-  * Obsolete legacy interface. Keep it in order not to break userspace

target/linux/generic/patches-2.6.34/066-block2mtd_probe.patch

@@ -1,10 +0,0 @@
---- a/drivers/mtd/devices/block2mtd.c
-+++ b/drivers/mtd/devices/block2mtd.c
-@@ -269,6 +269,7 @@ static int _open_bdev(struct block2mtd_d
- 		/* We might not have rootfs mounted at this point. Try
- 		   to resolve the device name by other means. */
- 
-+		wait_for_device_probe();
- 		dev_t devt = name_to_dev_t(dev->devname);
- 		if (devt) {
- 			bdev = open_by_devnum(devt, FMODE_WRITE | FMODE_READ);

target/linux/generic/patches-2.6.34/070-redboot_space.patch

@@ -1,30 +0,0 @@
---- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -249,14 +249,21 @@ static int parse_redboot_partitions(stru
- #endif
- 		names += strlen(names)+1;
- 
--#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
- 		if(fl->next && fl->img->flash_base + fl->img->size + master->erasesize <= fl->next->img->flash_base) {
--			i++;
--			parts[i].offset = parts[i-1].size + parts[i-1].offset;
--			parts[i].size = fl->next->img->flash_base - parts[i].offset;
--			parts[i].name = nullname;
--		}
-+			if (!strcmp(parts[i].name, "rootfs")) {
-+				parts[i].size = fl->next->img->flash_base;
-+				parts[i].size &= ~(master->erasesize - 1);
-+				parts[i].size -= parts[i].offset;
-+#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
-+				nrparts--;
-+			} else {
-+				i++;
-+				parts[i].offset = parts[i-1].size + parts[i-1].offset;
-+				parts[i].size = fl->next->img->flash_base - parts[i].offset;
-+				parts[i].name = nullname;
- #endif
-+			}
-+		}
- 		tmp_fl = fl;
- 		fl = fl->next;
- 		kfree(tmp_fl);

target/linux/generic/patches-2.6.34/071-redboot_boardconfig.patch

@@ -1,60 +0,0 @@
---- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -11,6 +11,8 @@
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
- 
-+#define BOARD_CONFIG_PART		"boardconfig"
-+
- struct fis_image_desc {
-     unsigned char name[16];      // Null terminated name
-     uint32_t	  flash_base;    // Address within FLASH of image
-@@ -41,6 +43,7 @@ static int parse_redboot_partitions(stru
-                              struct mtd_partition **pparts,
-                              unsigned long fis_origin)
- {
-+	unsigned long max_offset = 0;
- 	int nrparts = 0;
- 	struct fis_image_desc *buf;
- 	struct mtd_partition *parts;
-@@ -209,14 +212,14 @@ static int parse_redboot_partitions(stru
- 		}
- 	}
- #endif
--	parts = kzalloc(sizeof(*parts)*nrparts + nulllen + namelen, GFP_KERNEL);
-+	parts = kzalloc(sizeof(*parts) * (nrparts + 1) + nulllen + namelen + sizeof(BOARD_CONFIG_PART), GFP_KERNEL);
- 
- 	if (!parts) {
- 		ret = -ENOMEM;
- 		goto out;
- 	}
- 
--	nullname = (char *)&parts[nrparts];
-+	nullname = (char *)&parts[nrparts + 1];
- #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
- 	if (nulllen > 0) {
- 		strcpy(nullname, nullstring);
-@@ -235,6 +238,8 @@ static int parse_redboot_partitions(stru
- 	}
- #endif
- 	for ( ; i<nrparts; i++) {
-+		if(max_offset < buf[i].flash_base + buf[i].size)
-+			max_offset = buf[i].flash_base + buf[i].size;
- 		parts[i].size = fl->img->size;
- 		parts[i].offset = fl->img->flash_base;
- 		parts[i].name = names;
-@@ -268,6 +273,14 @@ static int parse_redboot_partitions(stru
- 		fl = fl->next;
- 		kfree(tmp_fl);
- 	}
-+	if(master->size - max_offset >= master->erasesize)
-+	{
-+		parts[nrparts].size = master->size - max_offset;
-+		parts[nrparts].offset = max_offset;
-+		parts[nrparts].name = names;
-+		strcpy(names, BOARD_CONFIG_PART);
-+		nrparts++;
-+	}
- 	ret = nrparts;
- 	*pparts = parts;
-  out:

target/linux/generic/patches-2.6.34/080-mtd_plat_nand_chip_fixup.patch

@@ -1,32 +0,0 @@
---- a/include/linux/mtd/nand.h
-+++ b/include/linux/mtd/nand.h
-@@ -491,6 +491,7 @@ struct platform_nand_chip {
- 	int			chip_delay;
- 	unsigned int		options;
- 	const char		**part_probe_types;
-+	int			(*chip_fixup)(struct mtd_info *mtd);
- 	void			(*set_parts)(uint64_t size,
- 					struct platform_nand_chip *chip);
- 	void			*priv;
---- a/drivers/mtd/nand/plat_nand.c
-+++ b/drivers/mtd/nand/plat_nand.c
-@@ -91,7 +91,18 @@ static int __devinit plat_nand_probe(str
- 	}
- 
- 	/* Scan to find existance of the device */
--	if (nand_scan(&data->mtd, pdata->chip.nr_chips)) {
-+	if (nand_scan_ident(&data->mtd, pdata->chip.nr_chips)) {
-+		err = -ENXIO;
-+		goto out;
-+	}
-+
-+	if (pdata->chip.chip_fixup) {
-+		err = pdata->chip.chip_fixup(&data->mtd);
-+		if (err)
-+			goto out;
-+	}
-+
-+	if (nand_scan_tail(&data->mtd)) {
- 		err = -ENXIO;
- 		goto out;
- 	}

target/linux/generic/patches-2.6.34/081-mtd_myloader_partition_parser.patch

@@ -1,35 +0,0 @@
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -181,6 +181,22 @@ config MTD_AR7_PARTS
- 	---help---
- 	  TI AR7 partitioning support
- 
-+config MTD_MYLOADER_PARTS
-+	tristate "MyLoader partition parsing"
-+	depends on MTD_PARTITIONS && (ADM5120 || ATHEROS_AR231X || ATHEROS_AR71XX)
-+	---help---
-+	  MyLoader is a bootloader which allows the user to define partitions
-+	  in flash devices, by putting a table in the second erase block
-+	  on the device, similar to a partition table. This table gives the 
-+	  offsets and lengths of the user defined partitions.
-+
-+	  If you need code which can detect and parse these tables, and
-+	  register MTD 'partitions' corresponding to each image detected,
-+	  enable this option.
-+
-+	  You will still need the parsing functions to be called by the driver
-+	  for your particular device. It won't happen automatically.
-+
- comment "User Modules And Translation Layers"
- 
- config MTD_CHAR
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -13,6 +13,7 @@ obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdli
- obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o
- obj-$(CONFIG_MTD_AR7_PARTS)	+= ar7part.o
- obj-$(CONFIG_MTD_OF_PARTS)      += ofpart.o
-+obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
- 
- # 'Users' - code which presents functionality to userspace.
- obj-$(CONFIG_MTD_CHAR)		+= mtdchar.o

target/linux/generic/patches-2.6.34/082-mtd_info_move_forward_decl.patch

@@ -1,18 +0,0 @@
---- a/include/linux/mtd/partitions.h
-+++ b/include/linux/mtd/partitions.h
-@@ -33,6 +33,7 @@
-  * Note: writeable partitions require their size and offset be
-  * erasesize aligned (e.g. use MTDPART_OFS_NEXTBLK).
-  */
-+struct mtd_info;
- 
- struct mtd_partition;
- struct mtd_partition {
-@@ -49,7 +50,6 @@ struct mtd_partition {
- #define MTDPART_SIZ_FULL	(0)
- 
- 
--struct mtd_info;
- 
- int add_mtd_partitions(struct mtd_info *, const struct mtd_partition *, int);
- int del_mtd_partitions(struct mtd_info *);

target/linux/generic/patches-2.6.34/083-mtd_fix_nand_correct_data_return_code.patch

@@ -1,12 +0,0 @@
---- a/drivers/mtd/nand/nand_ecc.c
-+++ b/drivers/mtd/nand/nand_ecc.c
-@@ -507,8 +507,7 @@ int __nand_correct_data(unsigned char *b
- 	if ((bitsperbyte[b0] + bitsperbyte[b1] + bitsperbyte[b2]) == 1)
- 		return 1;	/* error in ecc data; no action needed */
- 
--	printk(KERN_ERR "uncorrectable error : ");
--	return -1;
-+	return -EBADMSG;
- }
- EXPORT_SYMBOL(__nand_correct_data);
- 

target/linux/generic/patches-2.6.34/084-mtd_m25p80_add_pm25lv_flash_support.patch

@@ -1,39 +0,0 @@
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -41,6 +41,7 @@
- #define	OPCODE_BE_4K		0x20	/* Erase 4KiB block */
- #define	OPCODE_BE_32K		0x52	/* Erase 32KiB block */
- #define	OPCODE_CHIP_ERASE	0xc7	/* Erase whole flash chip */
-+#define	OPCODE_BE_4K_PMC	0xd7	/* Erase 4KiB block on PMC chips*/
- #define	OPCODE_SE		0xd8	/* Sector erase (usually 64KiB) */
- #define	OPCODE_RDID		0x9f	/* Read JEDEC ID */
- 
-@@ -600,6 +601,7 @@ struct flash_info {
- 	u16		flags;
- #define	SECT_4K		0x01		/* OPCODE_BE_4K works uniformly */
- #define	M25P_NO_ERASE	0x02		/* No erase command needed */
-+#define	SECT_4K_PMC	0x04		/* OPCODE_BE_4K_PMC works uniformly */
- };
- 
- #define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags)	\
-@@ -646,6 +648,10 @@ static const struct spi_device_id m25p_i
- 	{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
- 	{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
- 
-+	/* PMC -- pm25x "blocks" are 32K, sectors are 4K */
-+	{ "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) },
-+	{ "pm25lv010", INFO(0, 0, 32 * 1024, 4, SECT_4K_PMC) },
-+
- 	/* Spansion -- single (large) sector size only, at least
- 	 * for the chips listed here (without boot sectors).
- 	 */
-@@ -858,6 +864,9 @@ static int __devinit m25p_probe(struct s
- 	if (info->flags & SECT_4K) {
- 		flash->erase_opcode = OPCODE_BE_4K;
- 		flash->mtd.erasesize = 4096;
-+	} else if (info->flags & SECT_4K_PMC) {
-+		flash->erase_opcode = OPCODE_BE_4K_PMC;
-+		flash->mtd.erasesize = 4096;
- 	} else {
- 		flash->erase_opcode = OPCODE_SE;
- 		flash->mtd.erasesize = info->sector_size;

target/linux/generic/patches-2.6.34/085-mtd_m25p80_add_en25pxx_support.patch

@@ -1,13 +0,0 @@
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -648,6 +648,10 @@ static const struct spi_device_id m25p_i
- 	{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
- 	{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
- 
-+	/* EON -- en25pxx */
-+	{ "en25p32", INFO(0x1c2016, 0, 64 * 1024,  64, 0) },
-+	{ "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) },
-+
- 	/* PMC -- pm25x "blocks" are 32K, sectors are 4K */
- 	{ "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) },
- 	{ "pm25lv010", INFO(0, 0, 32 * 1024, 4, SECT_4K_PMC) },

target/linux/generic/patches-2.6.34/086-mtd_m25p80_add_xxxs33b_support.patch

@@ -1,28 +0,0 @@
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -652,6 +652,11 @@ static const struct spi_device_id m25p_i
- 	{ "en25p32", INFO(0x1c2016, 0, 64 * 1024,  64, 0) },
- 	{ "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) },
- 
-+	/* Numonyx -- xxxs33b */
-+	{ "160s33b",  INFO(0x898911, 0, 64 * 1024,  32, 0) },
-+	{ "320s33b",  INFO(0x898912, 0, 64 * 1024,  64, 0) },
-+	{ "640s33b",  INFO(0x898913, 0, 64 * 1024, 128, 0) },
-+
- 	/* PMC -- pm25x "blocks" are 32K, sectors are 4K */
- 	{ "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) },
- 	{ "pm25lv010", INFO(0, 0, 32 * 1024, 4, SECT_4K_PMC) },
-@@ -836,11 +841,12 @@ static int __devinit m25p_probe(struct s
- 	dev_set_drvdata(&spi->dev, flash);
- 
- 	/*
--	 * Atmel and SST serial flash tend to power
-+	 * Atmel, SST and Intel/Numonyx serial flash tend to power
- 	 * up with the software protection bits set
- 	 */
- 
- 	if (info->jedec_id >> 16 == 0x1f ||
-+	    info->jedec_id >> 16 == 0x89 ||
- 	    info->jedec_id >> 16 == 0xbf) {
- 		write_enable(flash);
- 		write_sr(flash, 0);

target/linux/generic/patches-2.6.34/087-mtd-m25p80-add-w25q32-chip-support.patch

@@ -1,10 +0,0 @@
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -709,6 +709,7 @@ static const struct spi_device_id m25p_i
- 	{ "w25x80", INFO(0xef3014, 0, 64 * 1024,  16, SECT_4K) },
- 	{ "w25x16", INFO(0xef3015, 0, 64 * 1024,  32, SECT_4K) },
- 	{ "w25x32", INFO(0xef3016, 0, 64 * 1024,  64, SECT_4K) },
-+	{ "w25q32", INFO(0xef4016, 0, 64 * 1024,  64, SECT_4K) },
- 	{ "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) },
- 
- 	/* Catalyst / On Semiconductor -- non-JEDEC */

target/linux/generic/patches-2.6.34/088-winbond_cmdset.patch

@@ -1,10 +0,0 @@
---- a/drivers/mtd/chips/gen_probe.c
-+++ b/drivers/mtd/chips/gen_probe.c
-@@ -249,6 +249,7 @@ static struct mtd_info *check_cmd_set(st
- #endif
- #ifdef CONFIG_MTD_CFI_AMDSTD
- 	case 0x0002:
-+	case 0x0006:
- 		return cfi_cmdset_0002(map, primary);
- #endif
- #ifdef CONFIG_MTD_CFI_STAA

target/linux/generic/patches-2.6.34/089-mtd-samsung-flash.patch

@@ -1,37 +0,0 @@
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -327,9 +327,32 @@ static void cfi_fixup_major_minor(struct
- {
- 	// manufacturers defined in include/linux/mtd/cfi.h
- 
--	if (cfi->mfr == CFI_MFR_SAMSUNG && cfi->id == 0x257e &&
--	    extp->MajorVersion == '0')
-+	if (cfi->mfr == CFI_MFR_SAMSUNG &&
-+	    extp->MajorVersion == '0') {
-+		printk("  Fixed Samsung's Amd/Fujitsu Extended Query version from %c.%c",
-+		       extp->MajorVersion, extp->MinorVersion);
-+
- 		extp->MajorVersion = '1';
-+		extp->MinorVersion = '0';
-+
-+		printk(" to %c.%c.\n",
-+		       extp->MajorVersion, extp->MinorVersion);
-+	}
-+
-+	if (cfi->mfr == CFI_MFR_SAMSUNG &&
-+	    extp->MajorVersion == '3' && extp->MinorVersion == '3') {
-+		printk(KERN_NOTICE "  Newer Samsung flash detected, "
-+		       "should be compatibile with Amd/Fujitsu.\n");
-+
-+		printk("  Fixed Samsung's Amd/Fujitsu Extended Query version from %c.%c",
-+		       extp->MajorVersion, extp->MinorVersion);
-+
-+		extp->MajorVersion = '1';	// set to 1.3 (last defined version)
-+		extp->MinorVersion = '3';
-+
-+		printk(" to %c.%c.\n",
-+		       extp->MajorVersion, extp->MinorVersion);
-+	}
- }
- 
- struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary)

target/linux/generic/patches-2.6.34/090-mtd-m25p80-add-en25f32-chip-support.patch

@@ -1,12 +0,0 @@
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -648,7 +648,8 @@ static const struct spi_device_id m25p_i
- 	{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
- 	{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
- 
--	/* EON -- en25pxx */
-+	/* EON -- en25xxx */
-+	{ "en25f32", INFO(0x1c3116, 0, 64 * 1024,  64, SECT_4K) },
- 	{ "en25p32", INFO(0x1c2016, 0, 64 * 1024,  64, 0) },
- 	{ "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) },
- 

target/linux/generic/patches-2.6.34/100-netfilter_layer7_2.21.patch

@@ -1,2132 +0,0 @@
---- /dev/null
-+++ b/include/linux/netfilter/xt_layer7.h
-@@ -0,0 +1,13 @@
-+#ifndef _XT_LAYER7_H
-+#define _XT_LAYER7_H
-+
-+#define MAX_PATTERN_LEN 8192
-+#define MAX_PROTOCOL_LEN 256
-+
-+struct xt_layer7_info {
-+    char protocol[MAX_PROTOCOL_LEN];
-+    char pattern[MAX_PATTERN_LEN];
-+    u_int8_t invert;
-+};
-+
-+#endif /* _XT_LAYER7_H */
---- a/include/net/netfilter/nf_conntrack.h
-+++ b/include/net/netfilter/nf_conntrack.h
-@@ -116,6 +116,22 @@ struct nf_conn {
- 	u_int32_t secmark;
- #endif
- 
-+#if defined(CONFIG_NETFILTER_XT_MATCH_LAYER7) || \
-+    defined(CONFIG_NETFILTER_XT_MATCH_LAYER7_MODULE)
-+	struct {
-+		/*
-+		 * e.g. "http". NULL before decision. "unknown" after decision
-+		 * if no match.
-+		 */
-+		char *app_proto;
-+		/*
-+		 * application layer data so far. NULL after match decision.
-+		 */
-+		char *app_data;
-+		unsigned int app_data_len;
-+	} layer7;
-+#endif
-+
- 	/* Storage reserved for other modules: */
- 	union nf_conntrack_proto proto;
- 
---- a/net/netfilter/Kconfig
-+++ b/net/netfilter/Kconfig
-@@ -883,6 +883,27 @@ config NETFILTER_XT_MATCH_STATE
- 
- 	  To compile it as a module, choose M here.  If unsure, say N.
- 
-+config NETFILTER_XT_MATCH_LAYER7
-+	tristate '"layer7" match support'
-+	depends on NETFILTER_XTABLES
-+	depends on EXPERIMENTAL && (IP_NF_CONNTRACK || NF_CONNTRACK)
-+       depends on NF_CT_ACCT
-+	help
-+	  Say Y if you want to be able to classify connections (and their
-+	  packets) based on regular expression matching of their application
-+	  layer data.   This is one way to classify applications such as
-+	  peer-to-peer filesharing systems that do not always use the same
-+	  port.
-+
-+	  To compile it as a module, choose M here.  If unsure, say N.
-+
-+config NETFILTER_XT_MATCH_LAYER7_DEBUG
-+        bool 'Layer 7 debugging output'
-+        depends on NETFILTER_XT_MATCH_LAYER7
-+        help
-+          Say Y to get lots of debugging output.
-+
-+
- config NETFILTER_XT_MATCH_STATISTIC
- 	tristate '"statistic" match support'
- 	depends on NETFILTER_ADVANCED
---- a/net/netfilter/Makefile
-+++ b/net/netfilter/Makefile
-@@ -90,6 +90,7 @@ obj-$(CONFIG_NETFILTER_XT_MATCH_RECENT)
- obj-$(CONFIG_NETFILTER_XT_MATCH_SCTP) += xt_sctp.o
- obj-$(CONFIG_NETFILTER_XT_MATCH_SOCKET) += xt_socket.o
- obj-$(CONFIG_NETFILTER_XT_MATCH_STATE) += xt_state.o
-+obj-$(CONFIG_NETFILTER_XT_MATCH_LAYER7) += xt_layer7.o
- obj-$(CONFIG_NETFILTER_XT_MATCH_STATISTIC) += xt_statistic.o
- obj-$(CONFIG_NETFILTER_XT_MATCH_STRING) += xt_string.o
- obj-$(CONFIG_NETFILTER_XT_MATCH_TCPMSS) += xt_tcpmss.o
---- a/net/netfilter/nf_conntrack_core.c
-+++ b/net/netfilter/nf_conntrack_core.c
-@@ -202,6 +202,14 @@ destroy_conntrack(struct nf_conntrack *n
- 	 * too. */
- 	nf_ct_remove_expectations(ct);
- 
-+	#if defined(CONFIG_NETFILTER_XT_MATCH_LAYER7) || defined(CONFIG_NETFILTER_XT_MATCH_LAYER7_MODULE)
-+	if(ct->layer7.app_proto)
-+		kfree(ct->layer7.app_proto);
-+	if(ct->layer7.app_data)
-+	kfree(ct->layer7.app_data);
-+	#endif
-+
-+
- 	/* We overload first tuple to link into unconfirmed list. */
- 	if (!nf_ct_is_confirmed(ct)) {
- 		BUG_ON(hlist_nulls_unhashed(&ct->tuplehash[IP_CT_DIR_ORIGINAL].hnnode));
---- a/net/netfilter/nf_conntrack_standalone.c
-+++ b/net/netfilter/nf_conntrack_standalone.c
-@@ -178,6 +178,12 @@ static int ct_seq_show(struct seq_file *
- 		goto release;
- #endif
- 
-+#if defined(CONFIG_NETFILTER_XT_MATCH_LAYER7) || defined(CONFIG_NETFILTER_XT_MATCH_LAYER7_MODULE)
-+	if(ct->layer7.app_proto &&
-+           seq_printf(s, "l7proto=%s ", ct->layer7.app_proto))
-+		return -ENOSPC;
-+#endif
-+
- 	if (seq_printf(s, "use=%u\n", atomic_read(&ct->ct_general.use)))
- 		goto release;
- 
---- /dev/null
-+++ b/net/netfilter/regexp/regexp.c
-@@ -0,0 +1,1197 @@
-+/*
-+ * regcomp and regexec -- regsub and regerror are elsewhere
-+ * @(#)regexp.c	1.3 of 18 April 87
-+ *
-+ *	Copyright (c) 1986 by University of Toronto.
-+ *	Written by Henry Spencer.  Not derived from licensed software.
-+ *
-+ *	Permission is granted to anyone to use this software for any
-+ *	purpose on any computer system, and to redistribute it freely,
-+ *	subject to the following restrictions:
-+ *
-+ *	1. The author is not responsible for the consequences of use of
-+ *		this software, no matter how awful, even if they arise
-+ *		from defects in it.
-+ *
-+ *	2. The origin of this software must not be misrepresented, either
-+ *		by explicit claim or by omission.
-+ *
-+ *	3. Altered versions must be plainly marked as such, and must not
-+ *		be misrepresented as being the original software.
-+ *
-+ * Beware that some of this code is subtly aware of the way operator
-+ * precedence is structured in regular expressions.  Serious changes in
-+ * regular-expression syntax might require a total rethink.
-+ *
-+ * This code was modified by Ethan Sommer to work within the kernel
-+ * (it now uses kmalloc etc..)
-+ *
-+ * Modified slightly by Matthew Strait to use more modern C.
-+ */
-+
-+#include "regexp.h"
-+#include "regmagic.h"
-+
-+/* added by ethan and matt.  Lets it work in both kernel and user space.
-+(So iptables can use it, for instance.)  Yea, it goes both ways... */
-+#if __KERNEL__
-+  #define malloc(foo) kmalloc(foo,GFP_ATOMIC)
-+#else
-+  #define printk(format,args...) printf(format,##args)
-+#endif
-+
-+void regerror(char * s)
-+{
-+        printk("<3>Regexp: %s\n", s);
-+        /* NOTREACHED */
-+}
-+
-+/*
-+ * The "internal use only" fields in regexp.h are present to pass info from
-+ * compile to execute that permits the execute phase to run lots faster on
-+ * simple cases.  They are:
-+ *
-+ * regstart	char that must begin a match; '\0' if none obvious
-+ * reganch	is the match anchored (at beginning-of-line only)?
-+ * regmust	string (pointer into program) that match must include, or NULL
-+ * regmlen	length of regmust string
-+ *
-+ * Regstart and reganch permit very fast decisions on suitable starting points
-+ * for a match, cutting down the work a lot.  Regmust permits fast rejection
-+ * of lines that cannot possibly match.  The regmust tests are costly enough
-+ * that regcomp() supplies a regmust only if the r.e. contains something
-+ * potentially expensive (at present, the only such thing detected is * or +
-+ * at the start of the r.e., which can involve a lot of backup).  Regmlen is
-+ * supplied because the test in regexec() needs it and regcomp() is computing
-+ * it anyway.
-+ */
-+
-+/*
-+ * Structure for regexp "program".  This is essentially a linear encoding
-+ * of a nondeterministic finite-state machine (aka syntax charts or
-+ * "railroad normal form" in parsing technology).  Each node is an opcode
-+ * plus a "next" pointer, possibly plus an operand.  "Next" pointers of
-+ * all nodes except BRANCH implement concatenation; a "next" pointer with
-+ * a BRANCH on both ends of it is connecting two alternatives.  (Here we
-+ * have one of the subtle syntax dependencies:  an individual BRANCH (as
-+ * opposed to a collection of them) is never concatenated with anything
-+ * because of operator precedence.)  The operand of some types of node is
-+ * a literal string; for others, it is a node leading into a sub-FSM.  In
-+ * particular, the operand of a BRANCH node is the first node of the branch.
-+ * (NB this is *not* a tree structure:  the tail of the branch connects
-+ * to the thing following the set of BRANCHes.)  The opcodes are:
-+ */
-+
-+/* definition	number	opnd?	meaning */
-+#define	END	0	/* no	End of program. */
-+#define	BOL	1	/* no	Match "" at beginning of line. */
-+#define	EOL	2	/* no	Match "" at end of line. */
-+#define	ANY	3	/* no	Match any one character. */
-+#define	ANYOF	4	/* str	Match any character in this string. */
-+#define	ANYBUT	5	/* str	Match any character not in this string. */
-+#define	BRANCH	6	/* node	Match this alternative, or the next... */
-+#define	BACK	7	/* no	Match "", "next" ptr points backward. */
-+#define	EXACTLY	8	/* str	Match this string. */
-+#define	NOTHING	9	/* no	Match empty string. */
-+#define	STAR	10	/* node	Match this (simple) thing 0 or more times. */
-+#define	PLUS	11	/* node	Match this (simple) thing 1 or more times. */
-+#define	OPEN	20	/* no	Mark this point in input as start of #n. */
-+			/*	OPEN+1 is number 1, etc. */
-+#define	CLOSE	30	/* no	Analogous to OPEN. */
-+
-+/*
-+ * Opcode notes:
-+ *
-+ * BRANCH	The set of branches constituting a single choice are hooked
-+ *		together with their "next" pointers, since precedence prevents
-+ *		anything being concatenated to any individual branch.  The
-+ *		"next" pointer of the last BRANCH in a choice points to the
-+ *		thing following the whole choice.  This is also where the
-+ *		final "next" pointer of each individual branch points; each
-+ *		branch starts with the operand node of a BRANCH node.
-+ *
-+ * BACK		Normal "next" pointers all implicitly point forward; BACK
-+ *		exists to make loop structures possible.
-+ *
-+ * STAR,PLUS	'?', and complex '*' and '+', are implemented as circular
-+ *		BRANCH structures using BACK.  Simple cases (one character
-+ *		per match) are implemented with STAR and PLUS for speed
-+ *		and to minimize recursive plunges.
-+ *
-+ * OPEN,CLOSE	...are numbered at compile time.
-+ */
-+
-+/*
-+ * A node is one char of opcode followed by two chars of "next" pointer.
-+ * "Next" pointers are stored as two 8-bit pieces, high order first.  The
-+ * value is a positive offset from the opcode of the node containing it.
-+ * An operand, if any, simply follows the node.  (Note that much of the
-+ * code generation knows about this implicit relationship.)
-+ *
-+ * Using two bytes for the "next" pointer is vast overkill for most things,
-+ * but allows patterns to get big without disasters.
-+ */
-+#define	OP(p)	(*(p))
-+#define	NEXT(p)	(((*((p)+1)&0377)<<8) + (*((p)+2)&0377))
-+#define	OPERAND(p)	((p) + 3)
-+
-+/*
-+ * See regmagic.h for one further detail of program structure.
-+ */
-+
-+
-+/*
-+ * Utility definitions.
-+ */
-+#ifndef CHARBITS
-+#define	UCHARAT(p)	((int)*(unsigned char *)(p))
-+#else
-+#define	UCHARAT(p)	((int)*(p)&CHARBITS)
-+#endif
-+
-+#define	FAIL(m)	{ regerror(m); return(NULL); }
-+#define	ISMULT(c)	((c) == '*' || (c) == '+' || (c) == '?')
-+#define	META	"^$.[()|?+*\\"
-+
-+/*
-+ * Flags to be passed up and down.
-+ */
-+#define	HASWIDTH	01	/* Known never to match null string. */
-+#define	SIMPLE		02	/* Simple enough to be STAR/PLUS operand. */
-+#define	SPSTART		04	/* Starts with * or +. */
-+#define	WORST		0	/* Worst case. */
-+
-+/*
-+ * Global work variables for regcomp().
-+ */
-+struct match_globals {
-+char *reginput;		/* String-input pointer. */
-+char *regbol;		/* Beginning of input, for ^ check. */
-+char **regstartp;	/* Pointer to startp array. */
-+char **regendp;		/* Ditto for endp. */
-+char *regparse;		/* Input-scan pointer. */
-+int regnpar;		/* () count. */
-+char regdummy;
-+char *regcode;		/* Code-emit pointer; &regdummy = don't. */
-+long regsize;		/* Code size. */
-+};
-+
-+/*
-+ * Forward declarations for regcomp()'s friends.
-+ */
-+#ifndef STATIC
-+#define	STATIC	static
-+#endif
-+STATIC char *reg(struct match_globals *g, int paren,int *flagp);
-+STATIC char *regbranch(struct match_globals *g, int *flagp);
-+STATIC char *regpiece(struct match_globals *g, int *flagp);
-+STATIC char *regatom(struct match_globals *g, int *flagp);
-+STATIC char *regnode(struct match_globals *g, char op);
-+STATIC char *regnext(struct match_globals *g, char *p);
-+STATIC void regc(struct match_globals *g, char b);
-+STATIC void reginsert(struct match_globals *g, char op, char *opnd);
-+STATIC void regtail(struct match_globals *g, char *p, char *val);
-+STATIC void regoptail(struct match_globals *g, char *p, char *val);
-+
-+
-+__kernel_size_t my_strcspn(const char *s1,const char *s2)
-+{
-+        char *scan1;
-+        char *scan2;
-+        int count;
-+
-+        count = 0;
-+        for (scan1 = (char *)s1; *scan1 != '\0'; scan1++) {
-+                for (scan2 = (char *)s2; *scan2 != '\0';)       /* ++ moved down. */
-+                        if (*scan1 == *scan2++)
-+                                return(count);
-+                count++;
-+        }
-+        return(count);
-+}
-+
-+/*
-+ - regcomp - compile a regular expression into internal code
-+ *
-+ * We can't allocate space until we know how big the compiled form will be,
-+ * but we can't compile it (and thus know how big it is) until we've got a
-+ * place to put the code.  So we cheat:  we compile it twice, once with code
-+ * generation turned off and size counting turned on, and once "for real".
-+ * This also means that we don't allocate space until we are sure that the
-+ * thing really will compile successfully, and we never have to move the
-+ * code and thus invalidate pointers into it.  (Note that it has to be in
-+ * one piece because free() must be able to free it all.)
-+ *
-+ * Beware that the optimization-preparation code in here knows about some
-+ * of the structure of the compiled regexp.
-+ */
-+regexp *
-+regcomp(char *exp,int *patternsize)
-+{
-+	register regexp *r;
-+	register char *scan;
-+	register char *longest;
-+	register int len;
-+	int flags;
-+	struct match_globals g;
-+	
-+	/* commented out by ethan
-+	   extern char *malloc();
-+	*/
-+
-+	if (exp == NULL)
-+		FAIL("NULL argument");
-+
-+	/* First pass: determine size, legality. */
-+	g.regparse = exp;
-+	g.regnpar = 1;
-+	g.regsize = 0L;
-+	g.regcode = &g.regdummy;
-+	regc(&g, MAGIC);
-+	if (reg(&g, 0, &flags) == NULL)
-+		return(NULL);
-+
-+	/* Small enough for pointer-storage convention? */
-+	if (g.regsize >= 32767L)		/* Probably could be 65535L. */
-+		FAIL("regexp too big");
-+
-+	/* Allocate space. */
-+	*patternsize=sizeof(regexp) + (unsigned)g.regsize;
-+	r = (regexp *)malloc(sizeof(regexp) + (unsigned)g.regsize);
-+	if (r == NULL)
-+		FAIL("out of space");
-+
-+	/* Second pass: emit code. */
-+	g.regparse = exp;
-+	g.regnpar = 1;
-+	g.regcode = r->program;
-+	regc(&g, MAGIC);
-+	if (reg(&g, 0, &flags) == NULL)
-+		return(NULL);
-+
-+	/* Dig out information for optimizations. */
-+	r->regstart = '\0';	/* Worst-case defaults. */
-+	r->reganch = 0;
-+	r->regmust = NULL;
-+	r->regmlen = 0;
-+	scan = r->program+1;			/* First BRANCH. */
-+	if (OP(regnext(&g, scan)) == END) {		/* Only one top-level choice. */
-+		scan = OPERAND(scan);
-+
-+		/* Starting-point info. */
-+		if (OP(scan) == EXACTLY)
-+			r->regstart = *OPERAND(scan);
-+		else if (OP(scan) == BOL)
-+			r->reganch++;
-+
-+		/*
-+		 * If there's something expensive in the r.e., find the
-+		 * longest literal string that must appear and make it the
-+		 * regmust.  Resolve ties in favor of later strings, since
-+		 * the regstart check works with the beginning of the r.e.
-+		 * and avoiding duplication strengthens checking.  Not a
-+		 * strong reason, but sufficient in the absence of others.
-+		 */
-+		if (flags&SPSTART) {
-+			longest = NULL;
-+			len = 0;
-+			for (; scan != NULL; scan = regnext(&g, scan))
-+				if (OP(scan) == EXACTLY && strlen(OPERAND(scan)) >= len) {
-+					longest = OPERAND(scan);
-+					len = strlen(OPERAND(scan));
-+				}
-+			r->regmust = longest;
-+			r->regmlen = len;
-+		}
-+	}
-+
-+	return(r);
-+}
-+
-+/*
-+ - reg - regular expression, i.e. main body or parenthesized thing
-+ *
-+ * Caller must absorb opening parenthesis.
-+ *
-+ * Combining parenthesis handling with the base level of regular expression
-+ * is a trifle forced, but the need to tie the tails of the branches to what
-+ * follows makes it hard to avoid.
-+ */
-+static char *
-+reg(struct match_globals *g, int paren, int *flagp /* Parenthesized? */ )
-+{
-+	register char *ret;
-+	register char *br;
-+	register char *ender;
-+	register int parno = 0; /* 0 makes gcc happy */
-+	int flags;
-+
-+	*flagp = HASWIDTH;	/* Tentatively. */
-+
-+	/* Make an OPEN node, if parenthesized. */
-+	if (paren) {
-+		if (g->regnpar >= NSUBEXP)
-+			FAIL("too many ()");
-+		parno = g->regnpar;
-+		g->regnpar++;
-+		ret = regnode(g, OPEN+parno);
-+	} else
-+		ret = NULL;
-+
-+	/* Pick up the branches, linking them together. */
-+	br = regbranch(g, &flags);
-+	if (br == NULL)
-+		return(NULL);
-+	if (ret != NULL)
-+		regtail(g, ret, br);	/* OPEN -> first. */
-+	else
-+		ret = br;
-+	if (!(flags&HASWIDTH))
-+		*flagp &= ~HASWIDTH;
-+	*flagp |= flags&SPSTART;
-+	while (*g->regparse == '|') {
-+		g->regparse++;
-+		br = regbranch(g, &flags);
-+		if (br == NULL)
-+			return(NULL);
-+		regtail(g, ret, br);	/* BRANCH -> BRANCH. */
-+		if (!(flags&HASWIDTH))
-+			*flagp &= ~HASWIDTH;
-+		*flagp |= flags&SPSTART;
-+	}
-+
-+	/* Make a closing node, and hook it on the end. */
-+	ender = regnode(g, (paren) ? CLOSE+parno : END);	
-+	regtail(g, ret, ender);
-+
-+	/* Hook the tails of the branches to the closing node. */
-+	for (br = ret; br != NULL; br = regnext(g, br))
-+		regoptail(g, br, ender);
-+
-+	/* Check for proper termination. */
-+	if (paren && *g->regparse++ != ')') {
-+		FAIL("unmatched ()");
-+	} else if (!paren && *g->regparse != '\0') {
-+		if (*g->regparse == ')') {
-+			FAIL("unmatched ()");
-+		} else
-+			FAIL("junk on end");	/* "Can't happen". */
-+		/* NOTREACHED */
-+	}
-+
-+	return(ret);
-+}
-+
-+/*
-+ - regbranch - one alternative of an | operator
-+ *
-+ * Implements the concatenation operator.
-+ */
-+static char *
-+regbranch(struct match_globals *g, int *flagp)
-+{
-+	register char *ret;
-+	register char *chain;
-+	register char *latest;
-+	int flags;
-+
-+	*flagp = WORST;		/* Tentatively. */
-+
-+	ret = regnode(g, BRANCH);
-+	chain = NULL;
-+	while (*g->regparse != '\0' && *g->regparse != '|' && *g->regparse != ')') {
-+		latest = regpiece(g, &flags);
-+		if (latest == NULL)
-+			return(NULL);
-+		*flagp |= flags&HASWIDTH;
-+		if (chain == NULL)	/* First piece. */
-+			*flagp |= flags&SPSTART;
-+		else
-+			regtail(g, chain, latest);
-+		chain = latest;
-+	}
-+	if (chain == NULL)	/* Loop ran zero times. */
-+		(void) regnode(g, NOTHING);
-+
-+	return(ret);
-+}
-+
-+/*
-+ - regpiece - something followed by possible [*+?]
-+ *
-+ * Note that the branching code sequences used for ? and the general cases
-+ * of * and + are somewhat optimized:  they use the same NOTHING node as
-+ * both the endmarker for their branch list and the body of the last branch.
-+ * It might seem that this node could be dispensed with entirely, but the
-+ * endmarker role is not redundant.
-+ */
-+static char *
-+regpiece(struct match_globals *g, int *flagp)
-+{
-+	register char *ret;
-+	register char op;
-+	register char *next;
-+	int flags;
-+
-+	ret = regatom(g, &flags);
-+	if (ret == NULL)
-+		return(NULL);
-+
-+	op = *g->regparse;
-+	if (!ISMULT(op)) {
-+		*flagp = flags;
-+		return(ret);
-+	}
-+
-+	if (!(flags&HASWIDTH) && op != '?')
-+		FAIL("*+ operand could be empty");
-+	*flagp = (op != '+') ? (WORST|SPSTART) : (WORST|HASWIDTH);
-+
-+	if (op == '*' && (flags&SIMPLE))
-+		reginsert(g, STAR, ret);
-+	else if (op == '*') {
-+		/* Emit x* as (x&|), where & means "self". */
-+		reginsert(g, BRANCH, ret);			/* Either x */
-+		regoptail(g, ret, regnode(g, BACK));		/* and loop */
-+		regoptail(g, ret, ret);			/* back */
-+		regtail(g, ret, regnode(g, BRANCH));		/* or */
-+		regtail(g, ret, regnode(g, NOTHING));		/* null. */
-+	} else if (op == '+' && (flags&SIMPLE))
-+		reginsert(g, PLUS, ret);
-+	else if (op == '+') {
-+		/* Emit x+ as x(&|), where & means "self". */
-+		next = regnode(g, BRANCH);			/* Either */
-+		regtail(g, ret, next);
-+		regtail(g, regnode(g, BACK), ret);		/* loop back */
-+		regtail(g, next, regnode(g, BRANCH));		/* or */
-+		regtail(g, ret, regnode(g, NOTHING));		/* null. */
-+	} else if (op == '?') {
-+		/* Emit x? as (x|) */
-+		reginsert(g, BRANCH, ret);			/* Either x */
-+		regtail(g, ret, regnode(g, BRANCH));		/* or */
-+		next = regnode(g, NOTHING);		/* null. */
-+		regtail(g, ret, next);
-+		regoptail(g, ret, next);
-+	}
-+	g->regparse++;
-+	if (ISMULT(*g->regparse))
-+		FAIL("nested *?+");
-+
-+	return(ret);
-+}
-+
-+/*
-+ - regatom - the lowest level
-+ *
-+ * Optimization:  gobbles an entire sequence of ordinary characters so that
-+ * it can turn them into a single node, which is smaller to store and
-+ * faster to run.  Backslashed characters are exceptions, each becoming a
-+ * separate node; the code is simpler that way and it's not worth fixing.
-+ */
-+static char *
-+regatom(struct match_globals *g, int *flagp)
-+{
-+	register char *ret;
-+	int flags;
-+
-+	*flagp = WORST;		/* Tentatively. */
-+
-+	switch (*g->regparse++) {
-+	case '^':
-+		ret = regnode(g, BOL);
-+		break;
-+	case '$':
-+		ret = regnode(g, EOL);
-+		break;
-+	case '.':
-+		ret = regnode(g, ANY);
-+		*flagp |= HASWIDTH|SIMPLE;
-+		break;
-+	case '[': {
-+			register int class;
-+			register int classend;
-+
-+			if (*g->regparse == '^') {	/* Complement of range. */
-+				ret = regnode(g, ANYBUT);
-+				g->regparse++;
-+			} else
-+				ret = regnode(g, ANYOF);
-+			if (*g->regparse == ']' || *g->regparse == '-')
-+				regc(g, *g->regparse++);
-+			while (*g->regparse != '\0' && *g->regparse != ']') {
-+				if (*g->regparse == '-') {
-+					g->regparse++;
-+					if (*g->regparse == ']' || *g->regparse == '\0')
-+						regc(g, '-');
-+					else {
-+						class = UCHARAT(g->regparse-2)+1;
-+						classend = UCHARAT(g->regparse);
-+						if (class > classend+1)
-+							FAIL("invalid [] range");
-+						for (; class <= classend; class++)
-+							regc(g, class);
-+						g->regparse++;
-+					}
-+				} else
-+					regc(g, *g->regparse++);
-+			}
-+			regc(g, '\0');
-+			if (*g->regparse != ']')
-+				FAIL("unmatched []");
-+			g->regparse++;
-+			*flagp |= HASWIDTH|SIMPLE;
-+		}
-+		break;
-+	case '(':
-+		ret = reg(g, 1, &flags);
-+		if (ret == NULL)
-+			return(NULL);
-+		*flagp |= flags&(HASWIDTH|SPSTART);
-+		break;
-+	case '\0':
-+	case '|':
-+	case ')':
-+		FAIL("internal urp");	/* Supposed to be caught earlier. */
-+		break;
-+	case '?':
-+	case '+':
-+	case '*':
-+		FAIL("?+* follows nothing");
-+		break;
-+	case '\\':
-+		if (*g->regparse == '\0')
-+			FAIL("trailing \\");
-+		ret = regnode(g, EXACTLY);
-+		regc(g, *g->regparse++);
-+		regc(g, '\0');
-+		*flagp |= HASWIDTH|SIMPLE;
-+		break;
-+	default: {
-+			register int len;
-+			register char ender;
-+
-+			g->regparse--;
-+			len = my_strcspn((const char *)g->regparse, (const char *)META);
-+			if (len <= 0)
-+				FAIL("internal disaster");
-+			ender = *(g->regparse+len);
-+			if (len > 1 && ISMULT(ender))
-+				len--;		/* Back off clear of ?+* operand. */
-+			*flagp |= HASWIDTH;
-+			if (len == 1)
-+				*flagp |= SIMPLE;
-+			ret = regnode(g, EXACTLY);
-+			while (len > 0) {
-+				regc(g, *g->regparse++);
-+				len--;
-+			}
-+			regc(g, '\0');
-+		}
-+		break;
-+	}
-+
-+	return(ret);
-+}
-+
-+/*
-+ - regnode - emit a node
-+ */
-+static char *			/* Location. */
-+regnode(struct match_globals *g, char op)
-+{
-+	register char *ret;
-+	register char *ptr;
-+
-+	ret = g->regcode;
-+	if (ret == &g->regdummy) {
-+		g->regsize += 3;
-+		return(ret);
-+	}
-+
-+	ptr = ret;
-+	*ptr++ = op;
-+	*ptr++ = '\0';		/* Null "next" pointer. */
-+	*ptr++ = '\0';
-+	g->regcode = ptr;
-+
-+	return(ret);
-+}
-+
-+/*
-+ - regc - emit (if appropriate) a byte of code
-+ */
-+static void
-+regc(struct match_globals *g, char b)
-+{
-+	if (g->regcode != &g->regdummy)
-+		*g->regcode++ = b;
-+	else
-+		g->regsize++;
-+}
-+
-+/*
-+ - reginsert - insert an operator in front of already-emitted operand
-+ *
-+ * Means relocating the operand.
-+ */
-+static void
-+reginsert(struct match_globals *g, char op, char* opnd)
-+{
-+	register char *src;
-+	register char *dst;
-+	register char *place;
-+
-+	if (g->regcode == &g->regdummy) {
-+		g->regsize += 3;
-+		return;
-+	}
-+
-+	src = g->regcode;
-+	g->regcode += 3;
-+	dst = g->regcode;
-+	while (src > opnd)
-+		*--dst = *--src;
-+
-+	place = opnd;		/* Op node, where operand used to be. */
-+	*place++ = op;
-+	*place++ = '\0';
-+	*place++ = '\0';
-+}
-+
-+/*
-+ - regtail - set the next-pointer at the end of a node chain
-+ */
-+static void
-+regtail(struct match_globals *g, char *p, char *val)
-+{
-+	register char *scan;
-+	register char *temp;
-+	register int offset;
-+
-+	if (p == &g->regdummy)
-+		return;
-+
-+	/* Find last node. */
-+	scan = p;
-+	for (;;) {
-+		temp = regnext(g, scan);
-+		if (temp == NULL)
-+			break;
-+		scan = temp;
-+	}
-+
-+	if (OP(scan) == BACK)
-+		offset = scan - val;
-+	else
-+		offset = val - scan;
-+	*(scan+1) = (offset>>8)&0377;
-+	*(scan+2) = offset&0377;
-+}
-+
-+/*
-+ - regoptail - regtail on operand of first argument; nop if operandless
-+ */
-+static void
-+regoptail(struct match_globals *g, char *p, char *val)
-+{
-+	/* "Operandless" and "op != BRANCH" are synonymous in practice. */
-+	if (p == NULL || p == &g->regdummy || OP(p) != BRANCH)
-+		return;
-+	regtail(g, OPERAND(p), val);
-+}
-+
-+/*
-+ * regexec and friends
-+ */
-+
-+
-+/*
-+ * Forwards.
-+ */
-+STATIC int regtry(struct match_globals *g, regexp *prog, char *string);
-+STATIC int regmatch(struct match_globals *g, char *prog);
-+STATIC int regrepeat(struct match_globals *g, char *p);
-+
-+#ifdef DEBUG
-+int regnarrate = 0;
-+void regdump();
-+STATIC char *regprop(char *op);
-+#endif
-+
-+/*
-+ - regexec - match a regexp against a string
-+ */
-+int
-+regexec(regexp *prog, char *string)
-+{
-+	register char *s;
-+	struct match_globals g;
-+
-+	/* Be paranoid... */
-+	if (prog == NULL || string == NULL) {
-+		printk("<3>Regexp: NULL parameter\n");
-+		return(0);
-+	}
-+
-+	/* Check validity of program. */
-+	if (UCHARAT(prog->program) != MAGIC) {
-+		printk("<3>Regexp: corrupted program\n");
-+		return(0);
-+	}
-+
-+	/* If there is a "must appear" string, look for it. */
-+	if (prog->regmust != NULL) {
-+		s = string;
-+		while ((s = strchr(s, prog->regmust[0])) != NULL) {
-+			if (strncmp(s, prog->regmust, prog->regmlen) == 0)
-+				break;	/* Found it. */
-+			s++;
-+		}
-+		if (s == NULL)	/* Not present. */
-+			return(0);
-+	}
-+
-+	/* Mark beginning of line for ^ . */
-+	g.regbol = string;
-+
-+	/* Simplest case:  anchored match need be tried only once. */
-+	if (prog->reganch)
-+		return(regtry(&g, prog, string));
-+
-+	/* Messy cases:  unanchored match. */
-+	s = string;
-+	if (prog->regstart != '\0')
-+		/* We know what char it must start with. */
-+		while ((s = strchr(s, prog->regstart)) != NULL) {
-+			if (regtry(&g, prog, s))
-+				return(1);
-+			s++;
-+		}
-+	else
-+		/* We don't -- general case. */
-+		do {
-+			if (regtry(&g, prog, s))
-+				return(1);
-+		} while (*s++ != '\0');
-+
-+	/* Failure. */
-+	return(0);
-+}
-+
-+/*
-+ - regtry - try match at specific point
-+ */
-+static int			/* 0 failure, 1 success */
-+regtry(struct match_globals *g, regexp *prog, char *string)
-+{
-+	register int i;
-+	register char **sp;
-+	register char **ep;
-+
-+	g->reginput = string;
-+	g->regstartp = prog->startp;
-+	g->regendp = prog->endp;
-+
-+	sp = prog->startp;
-+	ep = prog->endp;
-+	for (i = NSUBEXP; i > 0; i--) {
-+		*sp++ = NULL;
-+		*ep++ = NULL;
-+	}
-+	if (regmatch(g, prog->program + 1)) {
-+		prog->startp[0] = string;
-+		prog->endp[0] = g->reginput;
-+		return(1);
-+	} else
-+		return(0);
-+}
-+
-+/*
-+ - regmatch - main matching routine
-+ *
-+ * Conceptually the strategy is simple:  check to see whether the current
-+ * node matches, call self recursively to see whether the rest matches,
-+ * and then act accordingly.  In practice we make some effort to avoid
-+ * recursion, in particular by going through "ordinary" nodes (that don't
-+ * need to know whether the rest of the match failed) by a loop instead of
-+ * by recursion.
-+ */
-+static int			/* 0 failure, 1 success */
-+regmatch(struct match_globals *g, char *prog)
-+{
-+	register char *scan = prog; /* Current node. */
-+	char *next;		    /* Next node. */
-+
-+#ifdef DEBUG
-+	if (scan != NULL && regnarrate)
-+		fprintf(stderr, "%s(\n", regprop(scan));
-+#endif
-+	while (scan != NULL) {
-+#ifdef DEBUG
-+		if (regnarrate)
-+			fprintf(stderr, "%s...\n", regprop(scan));
-+#endif
-+		next = regnext(g, scan);
-+
-+		switch (OP(scan)) {
-+		case BOL:
-+			if (g->reginput != g->regbol)
-+				return(0);
-+			break;
-+		case EOL:
-+			if (*g->reginput != '\0')
-+				return(0);
-+			break;
-+		case ANY:
-+			if (*g->reginput == '\0')
-+				return(0);
-+			g->reginput++;
-+			break;
-+		case EXACTLY: {
-+				register int len;
-+				register char *opnd;
-+
-+				opnd = OPERAND(scan);
-+				/* Inline the first character, for speed. */
-+				if (*opnd != *g->reginput)
-+					return(0);
-+				len = strlen(opnd);
-+				if (len > 1 && strncmp(opnd, g->reginput, len) != 0)
-+					return(0);
-+				g->reginput += len;
-+			}
-+			break;
-+		case ANYOF:
-+			if (*g->reginput == '\0' || strchr(OPERAND(scan), *g->reginput) == NULL)
-+				return(0);
-+			g->reginput++;
-+			break;
-+		case ANYBUT:
-+			if (*g->reginput == '\0' || strchr(OPERAND(scan), *g->reginput) != NULL)
-+				return(0);
-+			g->reginput++;
-+			break;
-+		case NOTHING:
-+		case BACK:
-+			break;
-+		case OPEN+1:
-+		case OPEN+2:
-+		case OPEN+3:
-+		case OPEN+4:
-+		case OPEN+5:
-+		case OPEN+6:
-+		case OPEN+7:
-+		case OPEN+8:
-+		case OPEN+9: {
-+				register int no;
-+				register char *save;
-+
-+				no = OP(scan) - OPEN;
-+				save = g->reginput;
-+
-+				if (regmatch(g, next)) {
-+					/*
-+					 * Don't set startp if some later
-+					 * invocation of the same parentheses
-+					 * already has.
-+					 */
-+					if (g->regstartp[no] == NULL)
-+						g->regstartp[no] = save;
-+					return(1);
-+				} else
-+					return(0);
-+			}
-+			break;
-+		case CLOSE+1:
-+		case CLOSE+2:
-+		case CLOSE+3:
-+		case CLOSE+4:
-+		case CLOSE+5:
-+		case CLOSE+6:
-+		case CLOSE+7:
-+		case CLOSE+8:
-+		case CLOSE+9:
-+			{
-+				register int no;
-+				register char *save;
-+
-+				no = OP(scan) - CLOSE;
-+				save = g->reginput;
-+
-+				if (regmatch(g, next)) {
-+					/*
-+					 * Don't set endp if some later
-+					 * invocation of the same parentheses
-+					 * already has.
-+					 */
-+					if (g->regendp[no] == NULL)
-+						g->regendp[no] = save;
-+					return(1);
-+				} else
-+					return(0);
-+			}
-+			break;
-+		case BRANCH: {
-+				register char *save;
-+
-+				if (OP(next) != BRANCH)		/* No choice. */
-+					next = OPERAND(scan);	/* Avoid recursion. */
-+				else {
-+					do {
-+						save = g->reginput;
-+						if (regmatch(g, OPERAND(scan)))
-+							return(1);
-+						g->reginput = save;
-+						scan = regnext(g, scan);
-+					} while (scan != NULL && OP(scan) == BRANCH);
-+					return(0);
-+					/* NOTREACHED */
-+				}
-+			}
-+			break;
-+		case STAR:
-+		case PLUS: {
-+				register char nextch;
-+				register int no;
-+				register char *save;
-+				register int min;
-+
-+				/*
-+				 * Lookahead to avoid useless match attempts
-+				 * when we know what character comes next.
-+				 */
-+				nextch = '\0';
-+				if (OP(next) == EXACTLY)
-+					nextch = *OPERAND(next);
-+				min = (OP(scan) == STAR) ? 0 : 1;
-+				save = g->reginput;
-+				no = regrepeat(g, OPERAND(scan));
-+				while (no >= min) {
-+					/* If it could work, try it. */
-+					if (nextch == '\0' || *g->reginput == nextch)
-+						if (regmatch(g, next))
-+							return(1);
-+					/* Couldn't or didn't -- back up. */
-+					no--;
-+					g->reginput = save + no;
-+				}
-+				return(0);
-+			}
-+			break;
-+		case END:
-+			return(1);	/* Success! */
-+			break;
-+		default:
-+			printk("<3>Regexp: memory corruption\n");
-+			return(0);
-+			break;
-+		}
-+
-+		scan = next;
-+	}
-+
-+	/*
-+	 * We get here only if there's trouble -- normally "case END" is
-+	 * the terminating point.
-+	 */
-+	printk("<3>Regexp: corrupted pointers\n");
-+	return(0);
-+}
-+
-+/*
-+ - regrepeat - repeatedly match something simple, report how many
-+ */
-+static int
-+regrepeat(struct match_globals *g, char *p)
-+{
-+	register int count = 0;
-+	register char *scan;
-+	register char *opnd;
-+
-+	scan = g->reginput;
-+	opnd = OPERAND(p);
-+	switch (OP(p)) {
-+	case ANY:
-+		count = strlen(scan);
-+		scan += count;
-+		break;
-+	case EXACTLY:
-+		while (*opnd == *scan) {
-+			count++;
-+			scan++;
-+		}
-+		break;
-+	case ANYOF:
-+		while (*scan != '\0' && strchr(opnd, *scan) != NULL) {
-+			count++;
-+			scan++;
-+		}
-+		break;
-+	case ANYBUT:
-+		while (*scan != '\0' && strchr(opnd, *scan) == NULL) {
-+			count++;
-+			scan++;
-+		}
-+		break;
-+	default:		/* Oh dear.  Called inappropriately. */
-+		printk("<3>Regexp: internal foulup\n");
-+		count = 0;	/* Best compromise. */
-+		break;
-+	}
-+	g->reginput = scan;
-+
-+	return(count);
-+}
-+
-+/*
-+ - regnext - dig the "next" pointer out of a node
-+ */
-+static char*
-+regnext(struct match_globals *g, char *p)
-+{
-+	register int offset;
-+
-+	if (p == &g->regdummy)
-+		return(NULL);
-+
-+	offset = NEXT(p);
-+	if (offset == 0)
-+		return(NULL);
-+
-+	if (OP(p) == BACK)
-+		return(p-offset);
-+	else
-+		return(p+offset);
-+}
-+
-+#ifdef DEBUG
-+
-+STATIC char *regprop();
-+
-+/*
-+ - regdump - dump a regexp onto stdout in vaguely comprehensible form
-+ */
-+void
-+regdump(regexp *r)
-+{
-+	register char *s;
-+	register char op = EXACTLY;	/* Arbitrary non-END op. */
-+	register char *next;
-+	/* extern char *strchr(); */
-+
-+
-+	s = r->program + 1;
-+	while (op != END) {	/* While that wasn't END last time... */
-+		op = OP(s);
-+		printf("%2d%s", s-r->program, regprop(s));	/* Where, what. */
-+		next = regnext(s);
-+		if (next == NULL)		/* Next ptr. */
-+			printf("(0)");
-+		else
-+			printf("(%d)", (s-r->program)+(next-s));
-+		s += 3;
-+		if (op == ANYOF || op == ANYBUT || op == EXACTLY) {
-+			/* Literal string, where present. */
-+			while (*s != '\0') {
-+				putchar(*s);
-+				s++;
-+			}
-+			s++;
-+		}
-+		putchar('\n');
-+	}
-+
-+	/* Header fields of interest. */
-+	if (r->regstart != '\0')
-+		printf("start `%c' ", r->regstart);
-+	if (r->reganch)
-+		printf("anchored ");
-+	if (r->regmust != NULL)
-+		printf("must have \"%s\"", r->regmust);
-+	printf("\n");
-+}
-+
-+/*
-+ - regprop - printable representation of opcode
-+ */
-+static char *
-+regprop(char *op)
-+{
-+#define BUFLEN 50
-+	register char *p;
-+	static char buf[BUFLEN];
-+
-+	strcpy(buf, ":");
-+
-+	switch (OP(op)) {
-+	case BOL:
-+		p = "BOL";
-+		break;
-+	case EOL:
-+		p = "EOL";
-+		break;
-+	case ANY:
-+		p = "ANY";
-+		break;
-+	case ANYOF:
-+		p = "ANYOF";
-+		break;
-+	case ANYBUT:
-+		p = "ANYBUT";
-+		break;
-+	case BRANCH:
-+		p = "BRANCH";
-+		break;
-+	case EXACTLY:
-+		p = "EXACTLY";
-+		break;
-+	case NOTHING:
-+		p = "NOTHING";
-+		break;
-+	case BACK:
-+		p = "BACK";
-+		break;
-+	case END:
-+		p = "END";
-+		break;
-+	case OPEN+1:
-+	case OPEN+2:
-+	case OPEN+3:
-+	case OPEN+4:
-+	case OPEN+5:
-+	case OPEN+6:
-+	case OPEN+7:
-+	case OPEN+8:
-+	case OPEN+9:
-+		snprintf(buf+strlen(buf),BUFLEN-strlen(buf), "OPEN%d", OP(op)-OPEN);
-+		p = NULL;
-+		break;
-+	case CLOSE+1:
-+	case CLOSE+2:
-+	case CLOSE+3:
-+	case CLOSE+4:
-+	case CLOSE+5:
-+	case CLOSE+6:
-+	case CLOSE+7:
-+	case CLOSE+8:
-+	case CLOSE+9:
-+		snprintf(buf+strlen(buf),BUFLEN-strlen(buf), "CLOSE%d", OP(op)-CLOSE);
-+		p = NULL;
-+		break;
-+	case STAR:
-+		p = "STAR";
-+		break;
-+	case PLUS:
-+		p = "PLUS";
-+		break;
-+	default:
-+		printk("<3>Regexp: corrupted opcode\n");
-+		break;
-+	}
-+	if (p != NULL)
-+		strncat(buf, p, BUFLEN-strlen(buf));
-+	return(buf);
-+}
-+#endif
-+
-+
---- /dev/null
-+++ b/net/netfilter/regexp/regexp.h
-@@ -0,0 +1,41 @@
-+/*
-+ * Definitions etc. for regexp(3) routines.
-+ *
-+ * Caveat:  this is V8 regexp(3) [actually, a reimplementation thereof],
-+ * not the System V one.
-+ */
-+
-+#ifndef REGEXP_H
-+#define REGEXP_H
-+
-+
-+/*
-+http://www.opensource.apple.com/darwinsource/10.3/expect-1/expect/expect.h ,
-+which contains a version of this library, says:
-+
-+ *
-+ * NSUBEXP must be at least 10, and no greater than 117 or the parser
-+ * will not work properly.
-+ *
-+
-+However, it looks rather like this library is limited to 10.  If you think
-+otherwise, let us know.
-+*/
-+
-+#define NSUBEXP  10
-+typedef struct regexp {
-+	char *startp[NSUBEXP];
-+	char *endp[NSUBEXP];
-+	char regstart;		/* Internal use only. */
-+	char reganch;		/* Internal use only. */
-+	char *regmust;		/* Internal use only. */
-+	int regmlen;		/* Internal use only. */
-+	char program[1];	/* Unwarranted chumminess with compiler. */
-+} regexp;
-+
-+regexp * regcomp(char *exp, int *patternsize);
-+int regexec(regexp *prog, char *string);
-+void regsub(regexp *prog, char *source, char *dest);
-+void regerror(char *s);
-+
-+#endif
---- /dev/null
-+++ b/net/netfilter/regexp/regmagic.h
-@@ -0,0 +1,5 @@
-+/*
-+ * The first byte of the regexp internal "program" is actually this magic
-+ * number; the start node begins in the second byte.
-+ */
-+#define	MAGIC	0234
---- /dev/null
-+++ b/net/netfilter/regexp/regsub.c
-@@ -0,0 +1,95 @@
-+/*
-+ * regsub
-+ * @(#)regsub.c	1.3 of 2 April 86
-+ *
-+ *	Copyright (c) 1986 by University of Toronto.
-+ *	Written by Henry Spencer.  Not derived from licensed software.
-+ *
-+ *	Permission is granted to anyone to use this software for any
-+ *	purpose on any computer system, and to redistribute it freely,
-+ *	subject to the following restrictions:
-+ *
-+ *	1. The author is not responsible for the consequences of use of
-+ *		this software, no matter how awful, even if they arise
-+ *		from defects in it.
-+ *
-+ *	2. The origin of this software must not be misrepresented, either
-+ *		by explicit claim or by omission.
-+ *
-+ *	3. Altered versions must be plainly marked as such, and must not
-+ *		be misrepresented as being the original software.
-+ *
-+ *
-+ * This code was modified by Ethan Sommer to work within the kernel
-+ * (it now uses kmalloc etc..)
-+ *
-+ */
-+#include "regexp.h"
-+#include "regmagic.h"
-+#include <linux/string.h>
-+
-+
-+#ifndef CHARBITS
-+#define	UCHARAT(p)	((int)*(unsigned char *)(p))
-+#else
-+#define	UCHARAT(p)	((int)*(p)&CHARBITS)
-+#endif
-+
-+#if 0
-+//void regerror(char * s)
-+//{
-+//        printk("regexp(3): %s", s);
-+//        /* NOTREACHED */
-+//}
-+#endif
-+
-+/*
-+ - regsub - perform substitutions after a regexp match
-+ */
-+void
-+regsub(regexp * prog, char * source, char * dest)
-+{
-+	register char *src;
-+	register char *dst;
-+	register char c;
-+	register int no;
-+	register int len;
-+	
-+	/* Not necessary and gcc doesn't like it -MLS */
-+	/*extern char *strncpy();*/
-+
-+	if (prog == NULL || source == NULL || dest == NULL) {
-+		regerror("NULL parm to regsub");
-+		return;
-+	}
-+	if (UCHARAT(prog->program) != MAGIC) {
-+		regerror("damaged regexp fed to regsub");
-+		return;
-+	}
-+
-+	src = source;
-+	dst = dest;
-+	while ((c = *src++) != '\0') {
-+		if (c == '&')
-+			no = 0;
-+		else if (c == '\\' && '0' <= *src && *src <= '9')
-+			no = *src++ - '0';
-+		else
-+			no = -1;
-+
-+		if (no < 0) {	/* Ordinary character. */
-+			if (c == '\\' && (*src == '\\' || *src == '&'))
-+				c = *src++;
-+			*dst++ = c;
-+		} else if (prog->startp[no] != NULL && prog->endp[no] != NULL) {
-+			len = prog->endp[no] - prog->startp[no];
-+			(void) strncpy(dst, prog->startp[no], len);
-+			dst += len;
-+			if (len != 0 && *(dst-1) == '\0') {	/* strncpy hit NUL. */
-+				regerror("damaged match string");
-+				return;
-+			}
-+		}
-+	}
-+	*dst++ = '\0';
-+}
---- /dev/null
-+++ b/net/netfilter/xt_layer7.c
-@@ -0,0 +1,666 @@
-+/*
-+  Kernel module to match application layer (OSI layer 7) data in connections.
-+
-+  http://l7-filter.sf.net
-+
-+  (C) 2003-2009 Matthew Strait and Ethan Sommer.
-+
-+  This program is free software; you can redistribute it and/or
-+  modify it under the terms of the GNU General Public License
-+  as published by the Free Software Foundation; either version
-+  2 of the License, or (at your option) any later version.
-+  http://www.gnu.org/licenses/gpl.txt
-+
-+  Based on ipt_string.c (C) 2000 Emmanuel Roger <[email protected]>,
-+  xt_helper.c (C) 2002 Harald Welte and cls_layer7.c (C) 2003 Matthew Strait,
-+  Ethan Sommer, Justin Levandoski.
-+*/
-+
-+#include <linux/spinlock.h>
-+#include <linux/version.h>
-+#include <net/ip.h>
-+#include <net/tcp.h>
-+#include <linux/module.h>
-+#include <linux/skbuff.h>
-+#include <linux/netfilter.h>
-+#include <net/netfilter/nf_conntrack.h>
-+#include <net/netfilter/nf_conntrack_core.h>
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27)
-+#include <net/netfilter/nf_conntrack_extend.h>
-+#include <net/netfilter/nf_conntrack_acct.h>
-+#endif
-+#include <linux/netfilter/x_tables.h>
-+#include <linux/netfilter/xt_layer7.h>
-+#include <linux/ctype.h>
-+#include <linux/proc_fs.h>
-+
-+#include "regexp/regexp.c"
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Matthew Strait <[email protected]>, Ethan Sommer <[email protected]>");
-+MODULE_DESCRIPTION("iptables application layer match module");
-+MODULE_ALIAS("ipt_layer7");
-+MODULE_VERSION("2.21");
-+
-+static int maxdatalen = 2048; // this is the default
-+module_param(maxdatalen, int, 0444);
-+MODULE_PARM_DESC(maxdatalen, "maximum bytes of data looked at by l7-filter");
-+#ifdef CONFIG_NETFILTER_XT_MATCH_LAYER7_DEBUG
-+	#define DPRINTK(format,args...) printk(format,##args)
-+#else
-+	#define DPRINTK(format,args...)
-+#endif
-+
-+/* Number of packets whose data we look at.
-+This can be modified through /proc/net/layer7_numpackets */
-+static int num_packets = 10;
-+
-+static struct pattern_cache {
-+	char * regex_string;
-+	regexp * pattern;
-+	struct pattern_cache * next;
-+} * first_pattern_cache = NULL;
-+
-+DEFINE_SPINLOCK(l7_lock);
-+
-+static int total_acct_packets(struct nf_conn *ct)
-+{
-+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 26)
-+	BUG_ON(ct == NULL);
-+	return (ct->counters[IP_CT_DIR_ORIGINAL].packets + ct->counters[IP_CT_DIR_REPLY].packets);
-+#else
-+	struct nf_conn_counter *acct;
-+
-+	BUG_ON(ct == NULL);
-+	acct = nf_conn_acct_find(ct);
-+	if (!acct)
-+		return 0;
-+	return (acct[IP_CT_DIR_ORIGINAL].packets + acct[IP_CT_DIR_REPLY].packets);
-+#endif
-+}
-+
-+#ifdef CONFIG_IP_NF_MATCH_LAYER7_DEBUG
-+/* Converts an unfriendly string into a friendly one by
-+replacing unprintables with periods and all whitespace with " ". */
-+static char * friendly_print(unsigned char * s)
-+{
-+	char * f = kmalloc(strlen(s) + 1, GFP_ATOMIC);
-+	int i;
-+
-+	if(!f) {
-+		if (net_ratelimit())
-+			printk(KERN_ERR "layer7: out of memory in "
-+					"friendly_print, bailing.\n");
-+		return NULL;
-+	}
-+
-+	for(i = 0; i < strlen(s); i++){
-+		if(isprint(s[i]) && s[i] < 128)	f[i] = s[i];
-+		else if(isspace(s[i]))		f[i] = ' ';
-+		else 				f[i] = '.';
-+	}
-+	f[i] = '\0';
-+	return f;
-+}
-+
-+static char dec2hex(int i)
-+{
-+	switch (i) {
-+		case 0 ... 9:
-+			return (i + '0');
-+			break;
-+		case 10 ... 15:
-+			return (i - 10 + 'a');
-+			break;
-+		default:
-+			if (net_ratelimit())
-+				printk("layer7: Problem in dec2hex\n");
-+			return '\0';
-+	}
-+}
-+
-+static char * hex_print(unsigned char * s)
-+{
-+	char * g = kmalloc(strlen(s)*3 + 1, GFP_ATOMIC);
-+	int i;
-+
-+	if(!g) {
-+	       if (net_ratelimit())
-+			printk(KERN_ERR "layer7: out of memory in hex_print, "
-+					"bailing.\n");
-+	       return NULL;
-+	}
-+
-+	for(i = 0; i < strlen(s); i++) {
-+		g[i*3    ] = dec2hex(s[i]/16);
-+		g[i*3 + 1] = dec2hex(s[i]%16);
-+		g[i*3 + 2] = ' ';
-+	}
-+	g[i*3] = '\0';
-+
-+	return g;
-+}
-+#endif // DEBUG
-+
-+/* Use instead of regcomp.  As we expect to be seeing the same regexps over and
-+over again, it make sense to cache the results. */
-+static regexp * compile_and_cache(const char * regex_string, 
-+                                  const char * protocol)
-+{
-+	struct pattern_cache * node               = first_pattern_cache;
-+	struct pattern_cache * last_pattern_cache = first_pattern_cache;
-+	struct pattern_cache * tmp;
-+	unsigned int len;
-+
-+	while (node != NULL) {
-+		if (!strcmp(node->regex_string, regex_string))
-+		return node->pattern;
-+
-+		last_pattern_cache = node;/* points at the last non-NULL node */
-+		node = node->next;
-+	}
-+
-+	/* If we reach the end of the list, then we have not yet cached
-+	   the pattern for this regex. Let's do that now.
-+	   Be paranoid about running out of memory to avoid list corruption. */
-+	tmp = kmalloc(sizeof(struct pattern_cache), GFP_ATOMIC);
-+
-+	if(!tmp) {
-+		if (net_ratelimit())
-+			printk(KERN_ERR "layer7: out of memory in "
-+					"compile_and_cache, bailing.\n");
-+		return NULL;
-+	}
-+
-+	tmp->regex_string  = kmalloc(strlen(regex_string) + 1, GFP_ATOMIC);
-+	tmp->pattern       = kmalloc(sizeof(struct regexp),    GFP_ATOMIC);
-+	tmp->next = NULL;
-+
-+	if(!tmp->regex_string || !tmp->pattern) {
-+		if (net_ratelimit())
-+			printk(KERN_ERR "layer7: out of memory in "
-+					"compile_and_cache, bailing.\n");
-+		kfree(tmp->regex_string);
-+		kfree(tmp->pattern);
-+		kfree(tmp);
-+		return NULL;
-+	}
-+
-+	/* Ok.  The new node is all ready now. */
-+	node = tmp;
-+
-+	if(first_pattern_cache == NULL) /* list is empty */
-+		first_pattern_cache = node; /* make node the beginning */
-+	else
-+		last_pattern_cache->next = node; /* attach node to the end */
-+
-+	/* copy the string and compile the regex */
-+	len = strlen(regex_string);
-+	DPRINTK("About to compile this: \"%s\"\n", regex_string);
-+	node->pattern = regcomp((char *)regex_string, &len);
-+	if ( !node->pattern ) {
-+		if (net_ratelimit())
-+			printk(KERN_ERR "layer7: Error compiling regexp "
-+					"\"%s\" (%s)\n", 
-+					regex_string, protocol);
-+		/* pattern is now cached as NULL, so we won't try again. */
-+	}
-+
-+	strcpy(node->regex_string, regex_string);
-+	return node->pattern;
-+}
-+
-+static int can_handle(const struct sk_buff *skb)
-+{
-+	if(!ip_hdr(skb)) /* not IP */
-+		return 0;
-+	if(ip_hdr(skb)->protocol != IPPROTO_TCP &&
-+	   ip_hdr(skb)->protocol != IPPROTO_UDP &&
-+	   ip_hdr(skb)->protocol != IPPROTO_ICMP)
-+		return 0;
-+	return 1;
-+}
-+
-+/* Returns offset the into the skb->data that the application data starts */
-+static int app_data_offset(const struct sk_buff *skb)
-+{
-+	/* In case we are ported somewhere (ebtables?) where ip_hdr(skb)
-+	isn't set, this can be gotten from 4*(skb->data[0] & 0x0f) as well. */
-+	int ip_hl = 4*ip_hdr(skb)->ihl;
-+
-+	if( ip_hdr(skb)->protocol == IPPROTO_TCP ) {
-+		/* 12 == offset into TCP header for the header length field.
-+		Can't get this with skb->h.th->doff because the tcphdr
-+		struct doesn't get set when routing (this is confirmed to be
-+		true in Netfilter as well as QoS.) */
-+		int tcp_hl = 4*(skb->data[ip_hl + 12] >> 4);
-+
-+		return ip_hl + tcp_hl;
-+	} else if( ip_hdr(skb)->protocol == IPPROTO_UDP  ) {
-+		return ip_hl + 8; /* UDP header is always 8 bytes */
-+	} else if( ip_hdr(skb)->protocol == IPPROTO_ICMP ) {
-+		return ip_hl + 8; /* ICMP header is 8 bytes */
-+	} else {
-+		if (net_ratelimit())
-+			printk(KERN_ERR "layer7: tried to handle unknown "
-+					"protocol!\n");
-+		return ip_hl + 8; /* something reasonable */
-+	}
-+}
-+
-+/* handles whether there's a match when we aren't appending data anymore */
-+static int match_no_append(struct nf_conn * conntrack, 
-+                           struct nf_conn * master_conntrack, 
-+                           enum ip_conntrack_info ctinfo,
-+                           enum ip_conntrack_info master_ctinfo,
-+                           const struct xt_layer7_info * info)
-+{
-+	/* If we're in here, throw the app data away */
-+	if(master_conntrack->layer7.app_data != NULL) {
-+
-+	#ifdef CONFIG_IP_NF_MATCH_LAYER7_DEBUG
-+		if(!master_conntrack->layer7.app_proto) {
-+			char * f = 
-+			  friendly_print(master_conntrack->layer7.app_data);
-+			char * g = 
-+			  hex_print(master_conntrack->layer7.app_data);
-+			DPRINTK("\nl7-filter gave up after %d bytes "
-+				"(%d packets):\n%s\n",
-+				strlen(f), total_acct_packets(master_conntrack), f);
-+			kfree(f);
-+			DPRINTK("In hex: %s\n", g);
-+			kfree(g);
-+		}
-+	#endif
-+
-+		kfree(master_conntrack->layer7.app_data);
-+		master_conntrack->layer7.app_data = NULL; /* don't free again */
-+	}
-+
-+	if(master_conntrack->layer7.app_proto){
-+		/* Here child connections set their .app_proto (for /proc) */
-+		if(!conntrack->layer7.app_proto) {
-+			conntrack->layer7.app_proto = 
-+			  kmalloc(strlen(master_conntrack->layer7.app_proto)+1, 
-+			    GFP_ATOMIC);
-+			if(!conntrack->layer7.app_proto){
-+				if (net_ratelimit())
-+					printk(KERN_ERR "layer7: out of memory "
-+							"in match_no_append, "
-+							"bailing.\n");
-+				return 1;
-+			}
-+			strcpy(conntrack->layer7.app_proto, 
-+				master_conntrack->layer7.app_proto);
-+		}
-+
-+		return (!strcmp(master_conntrack->layer7.app_proto, 
-+				info->protocol));
-+	}
-+	else {
-+		/* If not classified, set to "unknown" to distinguish from
-+		connections that are still being tested. */
-+		master_conntrack->layer7.app_proto = 
-+			kmalloc(strlen("unknown")+1, GFP_ATOMIC);
-+		if(!master_conntrack->layer7.app_proto){
-+			if (net_ratelimit())
-+				printk(KERN_ERR "layer7: out of memory in "
-+						"match_no_append, bailing.\n");
-+			return 1;
-+		}
-+		strcpy(master_conntrack->layer7.app_proto, "unknown");
-+		return 0;
-+	}
-+}
-+
-+/* add the new app data to the conntrack.  Return number of bytes added. */
-+static int add_data(struct nf_conn * master_conntrack,
-+                    char * app_data, int appdatalen)
-+{
-+	int length = 0, i;
-+	int oldlength = master_conntrack->layer7.app_data_len;
-+
-+	/* This is a fix for a race condition by Deti Fliegl. However, I'm not 
-+	   clear on whether the race condition exists or whether this really 
-+	   fixes it.  I might just be being dense... Anyway, if it's not really 
-+	   a fix, all it does is waste a very small amount of time. */
-+	if(!master_conntrack->layer7.app_data) return 0;
-+
-+	/* Strip nulls. Make everything lower case (our regex lib doesn't
-+	do case insensitivity).  Add it to the end of the current data. */
-+	for(i = 0; i < maxdatalen-oldlength-1 &&
-+		   i < appdatalen; i++) {
-+		if(app_data[i] != '\0') {
-+			/* the kernel version of tolower mungs 'upper ascii' */
-+			master_conntrack->layer7.app_data[length+oldlength] =
-+				isascii(app_data[i])? 
-+					tolower(app_data[i]) : app_data[i];
-+			length++;
-+		}
-+	}
-+
-+	master_conntrack->layer7.app_data[length+oldlength] = '\0';
-+	master_conntrack->layer7.app_data_len = length + oldlength;
-+
-+	return length;
-+}
-+
-+/* taken from drivers/video/modedb.c */
-+static int my_atoi(const char *s)
-+{
-+	int val = 0;
-+
-+	for (;; s++) {
-+		switch (*s) {
-+			case '0'...'9':
-+			val = 10*val+(*s-'0');
-+			break;
-+		default:
-+			return val;
-+		}
-+	}
-+}
-+
-+/* write out num_packets to userland. */
-+static int layer7_read_proc(char* page, char ** start, off_t off, int count,
-+                            int* eof, void * data)
-+{
-+	if(num_packets > 99 && net_ratelimit())
-+		printk(KERN_ERR "layer7: NOT REACHED. num_packets too big\n");
-+
-+	page[0] = num_packets/10 + '0';
-+	page[1] = num_packets%10 + '0';
-+	page[2] = '\n';
-+	page[3] = '\0';
-+
-+	*eof=1;
-+
-+	return 3;
-+}
-+
-+/* Read in num_packets from userland */
-+static int layer7_write_proc(struct file* file, const char* buffer,
-+                             unsigned long count, void *data)
-+{
-+	char * foo = kmalloc(count, GFP_ATOMIC);
-+
-+	if(!foo){
-+		if (net_ratelimit())
-+			printk(KERN_ERR "layer7: out of memory, bailing. "
-+					"num_packets unchanged.\n");
-+		return count;
-+	}
-+
-+	if(copy_from_user(foo, buffer, count)) {
-+		return -EFAULT;
-+	}
-+
-+
-+	num_packets = my_atoi(foo);
-+	kfree (foo);
-+
-+	/* This has an arbitrary limit to make the math easier. I'm lazy.
-+	But anyway, 99 is a LOT! If you want more, you're doing it wrong! */
-+	if(num_packets > 99) {
-+		printk(KERN_WARNING "layer7: num_packets can't be > 99.\n");
-+		num_packets = 99;
-+	} else if(num_packets < 1) {
-+		printk(KERN_WARNING "layer7: num_packets can't be < 1.\n");
-+		num_packets = 1;
-+	}
-+
-+	return count;
-+}
-+
-+static bool
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
-+match(const struct sk_buff *skbin, const struct xt_match_param *par)
-+#else
-+match(const struct sk_buff *skbin,
-+      const struct net_device *in,
-+      const struct net_device *out,
-+      const struct xt_match *match,
-+      const void *matchinfo,
-+      int offset,
-+      unsigned int protoff,
-+      bool *hotdrop)
-+#endif
-+{
-+	/* sidestep const without getting a compiler warning... */
-+	struct sk_buff * skb = (struct sk_buff *)skbin; 
-+
-+	const struct xt_layer7_info * info = 
-+	#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
-+		par->matchinfo;
-+	#else
-+		matchinfo;
-+	#endif
-+
-+	enum ip_conntrack_info master_ctinfo, ctinfo;
-+	struct nf_conn *master_conntrack, *conntrack;
-+	unsigned char * app_data;
-+	unsigned int pattern_result, appdatalen;
-+	regexp * comppattern;
-+
-+	/* Be paranoid/incompetent - lock the entire match function. */
-+	spin_lock_bh(&l7_lock);
-+
-+	if(!can_handle(skb)){
-+		DPRINTK("layer7: This is some protocol I can't handle.\n");
-+		spin_unlock_bh(&l7_lock);
-+		return info->invert;
-+	}
-+
-+	/* Treat parent & all its children together as one connection, except
-+	for the purpose of setting conntrack->layer7.app_proto in the actual
-+	connection. This makes /proc/net/ip_conntrack more satisfying. */
-+	if(!(conntrack = nf_ct_get(skb, &ctinfo)) ||
-+	   !(master_conntrack=nf_ct_get(skb,&master_ctinfo))){
-+		DPRINTK("layer7: couldn't get conntrack.\n");
-+		spin_unlock_bh(&l7_lock);
-+		return info->invert;
-+	}
-+
-+	/* Try to get a master conntrack (and its master etc) for FTP, etc. */
-+	while (master_ct(master_conntrack) != NULL)
-+		master_conntrack = master_ct(master_conntrack);
-+
-+	/* if we've classified it or seen too many packets */
-+	if(total_acct_packets(master_conntrack) > num_packets ||
-+	   master_conntrack->layer7.app_proto) {
-+
-+		pattern_result = match_no_append(conntrack, master_conntrack, 
-+						 ctinfo, master_ctinfo, info);
-+
-+		/* skb->cb[0] == seen. Don't do things twice if there are 
-+		multiple l7 rules. I'm not sure that using cb for this purpose 
-+		is correct, even though it says "put your private variables 
-+		there". But it doesn't look like it is being used for anything
-+		else in the skbs that make it here. */
-+		skb->cb[0] = 1; /* marking it seen here's probably irrelevant */
-+
-+		spin_unlock_bh(&l7_lock);
-+		return (pattern_result ^ info->invert);
-+	}
-+
-+	if(skb_is_nonlinear(skb)){
-+		if(skb_linearize(skb) != 0){
-+			if (net_ratelimit())
-+				printk(KERN_ERR "layer7: failed to linearize "
-+						"packet, bailing.\n");
-+			spin_unlock_bh(&l7_lock);
-+			return info->invert;
-+		}
-+	}
-+
-+	/* now that the skb is linearized, it's safe to set these. */
-+	app_data = skb->data + app_data_offset(skb);
-+	appdatalen = skb_tail_pointer(skb) - app_data;
-+
-+	/* the return value gets checked later, when we're ready to use it */
-+	comppattern = compile_and_cache(info->pattern, info->protocol);
-+
-+	/* On the first packet of a connection, allocate space for app data */
-+	if(total_acct_packets(master_conntrack) == 1 && !skb->cb[0] && 
-+	   !master_conntrack->layer7.app_data){
-+		master_conntrack->layer7.app_data = 
-+			kmalloc(maxdatalen, GFP_ATOMIC);
-+		if(!master_conntrack->layer7.app_data){
-+			if (net_ratelimit())
-+				printk(KERN_ERR "layer7: out of memory in "
-+						"match, bailing.\n");
-+			spin_unlock_bh(&l7_lock);
-+			return info->invert;
-+		}
-+
-+		master_conntrack->layer7.app_data[0] = '\0';
-+	}
-+
-+	/* Can be here, but unallocated, if numpackets is increased near
-+	the beginning of a connection */
-+	if(master_conntrack->layer7.app_data == NULL){
-+		spin_unlock_bh(&l7_lock);
-+		return info->invert; /* unmatched */
-+	}
-+
-+	if(!skb->cb[0]){
-+		int newbytes;
-+		newbytes = add_data(master_conntrack, app_data, appdatalen);
-+
-+		if(newbytes == 0) { /* didn't add any data */
-+			skb->cb[0] = 1;
-+			/* Didn't match before, not going to match now */
-+			spin_unlock_bh(&l7_lock);
-+			return info->invert;
-+		}
-+	}
-+
-+	/* If looking for "unknown", then never match.  "Unknown" means that
-+	we've given up; we're still trying with these packets. */
-+	if(!strcmp(info->protocol, "unknown")) {
-+		pattern_result = 0;
-+	/* If looking for "unset", then always match. "Unset" means that we
-+	haven't yet classified the connection. */
-+	} else if(!strcmp(info->protocol, "unset")) {
-+		pattern_result = 2;
-+		DPRINTK("layer7: matched unset: not yet classified "
-+			"(%d/%d packets)\n",
-+                        total_acct_packets(master_conntrack), num_packets);
-+	/* If the regexp failed to compile, don't bother running it */
-+	} else if(comppattern && 
-+		  regexec(comppattern, master_conntrack->layer7.app_data)){
-+		DPRINTK("layer7: matched %s\n", info->protocol);
-+		pattern_result = 1;
-+	} else pattern_result = 0;
-+
-+	if(pattern_result == 1) {
-+		master_conntrack->layer7.app_proto = 
-+			kmalloc(strlen(info->protocol)+1, GFP_ATOMIC);
-+		if(!master_conntrack->layer7.app_proto){
-+			if (net_ratelimit())
-+				printk(KERN_ERR "layer7: out of memory in "
-+						"match, bailing.\n");
-+			spin_unlock_bh(&l7_lock);
-+			return (pattern_result ^ info->invert);
-+		}
-+		strcpy(master_conntrack->layer7.app_proto, info->protocol);
-+	} else if(pattern_result > 1) { /* cleanup from "unset" */
-+		pattern_result = 1;
-+	}
-+
-+	/* mark the packet seen */
-+	skb->cb[0] = 1;
-+
-+	spin_unlock_bh(&l7_lock);
-+	return (pattern_result ^ info->invert);
-+}
-+
-+// load nf_conntrack_ipv4
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
-+static bool check(const struct xt_mtchk_param *par)
-+{
-+        if (nf_ct_l3proto_try_module_get(par->match->family) < 0) {
-+                printk(KERN_WARNING "can't load conntrack support for "
-+                                    "proto=%d\n", par->match->family);
-+#else
-+static bool check(const char *tablename, const void *inf,
-+		 const struct xt_match *match, void *matchinfo,
-+		 unsigned int hook_mask)
-+{
-+        if (nf_ct_l3proto_try_module_get(match->family) < 0) {
-+                printk(KERN_WARNING "can't load conntrack support for "
-+                                    "proto=%d\n", match->family);
-+#endif
-+                return 0;
-+        }
-+	return 1;
-+}
-+
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
-+	static void destroy(const struct xt_mtdtor_param *par)
-+	{
-+		nf_ct_l3proto_module_put(par->match->family);
-+	}
-+#else
-+	static void destroy(const struct xt_match *match, void *matchinfo)
-+	{
-+		nf_ct_l3proto_module_put(match->family);
-+	}
-+#endif
-+
-+static struct xt_match xt_layer7_match[] __read_mostly = {
-+{
-+	.name		= "layer7",
-+	.family		= AF_INET,
-+	.checkentry	= check,
-+	.match		= match,
-+	.destroy	= destroy,
-+	.matchsize	= sizeof(struct xt_layer7_info),
-+	.me		= THIS_MODULE
-+}
-+};
-+
-+static void layer7_cleanup_proc(void)
-+{
-+	remove_proc_entry("layer7_numpackets", init_net.proc_net);
-+}
-+
-+/* register the proc file */
-+static void layer7_init_proc(void)
-+{
-+	struct proc_dir_entry* entry;
-+	entry = create_proc_entry("layer7_numpackets", 0644, init_net.proc_net);
-+	entry->read_proc = layer7_read_proc;
-+	entry->write_proc = layer7_write_proc;
-+}
-+
-+static int __init xt_layer7_init(void)
-+{
-+	need_conntrack();
-+
-+	layer7_init_proc();
-+	if(maxdatalen < 1) {
-+		printk(KERN_WARNING "layer7: maxdatalen can't be < 1, "
-+			"using 1\n");
-+		maxdatalen = 1;
-+	}
-+	/* This is not a hard limit.  It's just here to prevent people from
-+	bringing their slow machines to a grinding halt. */
-+	else if(maxdatalen > 65536) {
-+		printk(KERN_WARNING "layer7: maxdatalen can't be > 65536, "
-+			"using 65536\n");
-+		maxdatalen = 65536;
-+	}
-+	return xt_register_matches(xt_layer7_match,
-+				   ARRAY_SIZE(xt_layer7_match));
-+}
-+
-+static void __exit xt_layer7_fini(void)
-+{
-+	layer7_cleanup_proc();
-+	xt_unregister_matches(xt_layer7_match, ARRAY_SIZE(xt_layer7_match));
-+}
-+
-+module_init(xt_layer7_init);
-+module_exit(xt_layer7_fini);

target/linux/generic/patches-2.6.34/101-netfilter_layer7_pktmatch.patch

@@ -1,108 +0,0 @@
---- a/include/linux/netfilter/xt_layer7.h
-+++ b/include/linux/netfilter/xt_layer7.h
-@@ -8,6 +8,7 @@ struct xt_layer7_info {
-     char protocol[MAX_PROTOCOL_LEN];
-     char pattern[MAX_PATTERN_LEN];
-     u_int8_t invert;
-+    u_int8_t pkt;
- };
- 
- #endif /* _XT_LAYER7_H */
---- a/net/netfilter/xt_layer7.c
-+++ b/net/netfilter/xt_layer7.c
-@@ -314,33 +314,35 @@ static int match_no_append(struct nf_con
- }
- 
- /* add the new app data to the conntrack.  Return number of bytes added. */
--static int add_data(struct nf_conn * master_conntrack,
--                    char * app_data, int appdatalen)
-+static int add_datastr(char *target, int offset, char *app_data, int len)
- {
- 	int length = 0, i;
--	int oldlength = master_conntrack->layer7.app_data_len;
--
--	/* This is a fix for a race condition by Deti Fliegl. However, I'm not 
--	   clear on whether the race condition exists or whether this really 
--	   fixes it.  I might just be being dense... Anyway, if it's not really 
--	   a fix, all it does is waste a very small amount of time. */
--	if(!master_conntrack->layer7.app_data) return 0;
-+	if (!target) return 0;
- 
- 	/* Strip nulls. Make everything lower case (our regex lib doesn't
- 	do case insensitivity).  Add it to the end of the current data. */
--	for(i = 0; i < maxdatalen-oldlength-1 &&
--		   i < appdatalen; i++) {
-+ 	for(i = 0; i < maxdatalen-offset-1 && i < len; i++) {
- 		if(app_data[i] != '\0') {
- 			/* the kernel version of tolower mungs 'upper ascii' */
--			master_conntrack->layer7.app_data[length+oldlength] =
-+			target[length+offset] =
- 				isascii(app_data[i])? 
- 					tolower(app_data[i]) : app_data[i];
- 			length++;
- 		}
- 	}
-+	target[length+offset] = '\0';
-+
-+	return length;
-+}
-+
-+/* add the new app data to the conntrack.  Return number of bytes added. */
-+static int add_data(struct nf_conn * master_conntrack,
-+                    char * app_data, int appdatalen)
-+{
-+	int length;
- 
--	master_conntrack->layer7.app_data[length+oldlength] = '\0';
--	master_conntrack->layer7.app_data_len = length + oldlength;
-+	length = add_datastr(master_conntrack->layer7.app_data, master_conntrack->layer7.app_data_len, app_data, appdatalen);
-+	master_conntrack->layer7.app_data_len += length;
- 
- 	return length;
- }
-@@ -438,7 +440,7 @@ match(const struct sk_buff *skbin,
- 
- 	enum ip_conntrack_info master_ctinfo, ctinfo;
- 	struct nf_conn *master_conntrack, *conntrack;
--	unsigned char * app_data;
-+	unsigned char *app_data, *tmp_data;
- 	unsigned int pattern_result, appdatalen;
- 	regexp * comppattern;
- 
-@@ -466,8 +468,8 @@ match(const struct sk_buff *skbin,
- 		master_conntrack = master_ct(master_conntrack);
- 
- 	/* if we've classified it or seen too many packets */
--	if(total_acct_packets(master_conntrack) > num_packets ||
--	   master_conntrack->layer7.app_proto) {
-+	if(!info->pkt && (total_acct_packets(master_conntrack) > num_packets ||
-+	   master_conntrack->layer7.app_proto)) {
- 
- 		pattern_result = match_no_append(conntrack, master_conntrack, 
- 						 ctinfo, master_ctinfo, info);
-@@ -500,6 +502,25 @@ match(const struct sk_buff *skbin,
- 	/* the return value gets checked later, when we're ready to use it */
- 	comppattern = compile_and_cache(info->pattern, info->protocol);
- 
-+	if (info->pkt) {
-+		tmp_data = kmalloc(maxdatalen, GFP_ATOMIC);
-+		if(!tmp_data){
-+			if (net_ratelimit())
-+				printk(KERN_ERR "layer7: out of memory in match, bailing.\n");
-+			return info->invert;
-+		}
-+
-+		tmp_data[0] = '\0';
-+		add_datastr(tmp_data, 0, app_data, appdatalen);
-+		pattern_result = ((comppattern && regexec(comppattern, tmp_data)) ? 1 : 0);
-+
-+		kfree(tmp_data);
-+		tmp_data = NULL;
-+		spin_unlock_bh(&l7_lock);
-+
-+		return (pattern_result ^ info->invert);
-+	}
-+
- 	/* On the first packet of a connection, allocate space for app data */
- 	if(total_acct_packets(master_conntrack) == 1 && !skb->cb[0] && 
- 	   !master_conntrack->layer7.app_data){

target/linux/generic/patches-2.6.34/110-netfilter_match_speedup.patch

@@ -1,144 +0,0 @@
---- a/include/linux/netfilter_ipv4/ip_tables.h
-+++ b/include/linux/netfilter_ipv4/ip_tables.h
-@@ -62,6 +62,7 @@ struct ipt_ip {
- #define IPT_F_FRAG		0x01	/* Set if rule is a fragment rule */
- #define IPT_F_GOTO		0x02	/* Set if jump is a goto */
- #define IPT_F_MASK		0x03	/* All possible flag bits mask. */
-+#define IPT_F_NO_DEF_MATCH	0x80	/* Internal: no default match rules present */
- 
- /* Values for "inv" field in struct ipt_ip. */
- #define IPT_INV_VIA_IN		0x01	/* Invert the sense of IN IFACE. */
---- a/net/ipv4/netfilter/ip_tables.c
-+++ b/net/ipv4/netfilter/ip_tables.c
-@@ -95,6 +95,9 @@ ip_packet_match(const struct iphdr *ip,
- 
- #define FWINV(bool, invflg) ((bool) ^ !!(ipinfo->invflags & (invflg)))
- 
-+	if (ipinfo->flags & IPT_F_NO_DEF_MATCH)
-+		return true;
-+
- 	if (FWINV((ip->saddr&ipinfo->smsk.s_addr) != ipinfo->src.s_addr,
- 		  IPT_INV_SRCIP) ||
- 	    FWINV((ip->daddr&ipinfo->dmsk.s_addr) != ipinfo->dst.s_addr,
-@@ -145,13 +148,35 @@ ip_packet_match(const struct iphdr *ip,
- 		return false;
- 	}
- 
-+#undef FWINV
- 	return true;
- }
- 
- static bool
--ip_checkentry(const struct ipt_ip *ip)
-+ip_checkentry(struct ipt_ip *ip)
- {
--	if (ip->flags & ~IPT_F_MASK) {
-+#define FWINV(bool, invflg) ((bool) || (ip->invflags & (invflg)))
-+
-+	if (FWINV(ip->smsk.s_addr, IPT_INV_SRCIP) ||
-+		FWINV(ip->dmsk.s_addr, IPT_INV_DSTIP))
-+		goto has_match_rules;
-+
-+	if (FWINV(!!((const unsigned long *)ip->iniface_mask)[0],
-+		IPT_INV_VIA_IN) ||
-+	    FWINV(!!((const unsigned long *)ip->outiface_mask)[0],
-+		IPT_INV_VIA_OUT))
-+		goto has_match_rules;
-+
-+	if (FWINV(ip->proto, IPT_INV_PROTO))
-+		goto has_match_rules;
-+
-+	if (FWINV(ip->flags&IPT_F_FRAG, IPT_INV_FRAG))
-+		goto has_match_rules;
-+
-+	ip->flags |= IPT_F_NO_DEF_MATCH;
-+
-+has_match_rules:
-+	if (ip->flags & ~(IPT_F_MASK|IPT_F_NO_DEF_MATCH)) {
- 		duprintf("Unknown flag bits set: %08X\n",
- 			 ip->flags & ~IPT_F_MASK);
- 		return false;
-@@ -161,6 +186,8 @@ ip_checkentry(const struct ipt_ip *ip)
- 			 ip->invflags & ~IPT_INV_MASK);
- 		return false;
- 	}
-+
-+#undef FWINV
- 	return true;
- }
- 
-@@ -203,7 +230,6 @@ static inline bool unconditional(const s
- 	static const struct ipt_ip uncond;
- 
- 	return memcmp(ip, &uncond, sizeof(uncond)) == 0;
--#undef FWINV
- }
- 
- /* for const-correctness */
-@@ -336,8 +362,28 @@ ipt_do_table(struct sk_buff *skb,
- 	struct xt_match_param mtpar;
- 	struct xt_target_param tgpar;
- 
--	/* Initialization */
- 	ip = ip_hdr(skb);
-+
-+	IP_NF_ASSERT(table->valid_hooks & (1 << hook));
-+	xt_info_rdlock_bh();
-+	private = table->private;
-+	table_base = private->entries[smp_processor_id()];
-+	e = get_entry(table_base, private->hook_entry[hook]);
-+
-+	if (e->target_offset <= sizeof(struct ipt_entry) &&
-+		(e->ip.flags & IPT_F_NO_DEF_MATCH)) {
-+			struct ipt_entry_target *t = ipt_get_target(e);
-+			if (!t->u.kernel.target->target) {
-+				int v = ((struct ipt_standard_target *)t)->verdict;
-+				if ((v < 0) && (v != IPT_RETURN)) {
-+					ADD_COUNTER(e->counters, ntohs(ip->tot_len), 1);
-+					xt_info_rdunlock_bh();
-+					return (unsigned)(-v) - 1;
-+				}
-+			}
-+	}
-+
-+	/* Initialization */
- 	indev = in ? in->name : nulldevname;
- 	outdev = out ? out->name : nulldevname;
- 	/* We handle fragments by dealing with the first fragment as
-@@ -354,13 +400,6 @@ ipt_do_table(struct sk_buff *skb,
- 	mtpar.family  = tgpar.family = NFPROTO_IPV4;
- 	mtpar.hooknum = tgpar.hooknum = hook;
- 
--	IP_NF_ASSERT(table->valid_hooks & (1 << hook));
--	xt_info_rdlock_bh();
--	private = table->private;
--	table_base = private->entries[smp_processor_id()];
--
--	e = get_entry(table_base, private->hook_entry[hook]);
--
- 	/* For return from builtin chain */
- 	back = get_entry(table_base, private->underflow[hook]);
- 
-@@ -991,6 +1030,7 @@ copy_entries_to_user(unsigned int total_
- 		unsigned int i;
- 		const struct ipt_entry_match *m;
- 		const struct ipt_entry_target *t;
-+		u8 flags;
- 
- 		e = (struct ipt_entry *)(loc_cpu_entry + off);
- 		if (copy_to_user(userptr + off
-@@ -1000,6 +1040,14 @@ copy_entries_to_user(unsigned int total_
- 			ret = -EFAULT;
- 			goto free_counters;
- 		}
-+
-+		flags = e->ip.flags & ~IPT_F_NO_DEF_MATCH;
-+		if (copy_to_user(userptr + off
-+				 + offsetof(struct ipt_entry, ip.flags),
-+				 &flags, sizeof(flags)) != 0) {
-+			ret = -EFAULT;
-+			goto free_counters;
-+		}
- 
- 		for (i = sizeof(struct ipt_entry);
- 		     i < e->target_offset;

target/linux/generic/patches-2.6.34/120-netfilter_recent_reap.patch

@@ -1,71 +0,0 @@
---- a/include/linux/netfilter/xt_recent.h
-+++ b/include/linux/netfilter/xt_recent.h
-@@ -9,6 +9,7 @@ enum {
- 	XT_RECENT_UPDATE   = 1 << 2,
- 	XT_RECENT_REMOVE   = 1 << 3,
- 	XT_RECENT_TTL      = 1 << 4,
-+	XT_RECENT_REAP     = 1 << 5,
- 
- 	XT_RECENT_SOURCE   = 0,
- 	XT_RECENT_DEST     = 1,
-@@ -16,6 +17,9 @@ enum {
- 	XT_RECENT_NAME_LEN = 200,
- };
- 
-+/* Only allowed with --rcheck and --update */
-+#define XT_RECENT_MODIFIERS (XT_RECENT_TTL|XT_RECENT_REAP)
-+
- struct xt_recent_mtinfo {
- 	__u32 seconds;
- 	__u32 hit_count;
---- a/net/netfilter/xt_recent.c
-+++ b/net/netfilter/xt_recent.c
-@@ -147,6 +147,25 @@ static void recent_entry_remove(struct r
- 	t->entries--;
- }
- 
-+/*
-+ * Drop entries with timestamps older then 'time'.
-+ */
-+static void recent_entry_reap(struct recent_table *t, unsigned long time)
-+{
-+	struct recent_entry *e;
-+
-+	/*
-+	 * The head of the LRU list is always the oldest entry.
-+	 */
-+	e = list_entry(t->lru_list.next, struct recent_entry, lru_list);
-+
-+	/*
-+	 * The last time stamp is the most recent.
-+	 */
-+	if (time_after(time, e->stamps[e->index-1]))
-+		recent_entry_remove(t, e);
-+}
-+
- static struct recent_entry *
- recent_entry_init(struct recent_table *t, const union nf_inet_addr *addr,
- 		  u_int16_t family, u_int8_t ttl)
-@@ -273,6 +292,10 @@ recent_mt(const struct sk_buff *skb, con
- 				break;
- 			}
- 		}
-+
-+		/* info->seconds must be non-zero */
-+		if (info->check_set & XT_RECENT_REAP)
-+			recent_entry_reap(t, time);
- 	}
- 
- 	if (info->check_set & XT_RECENT_SET ||
-@@ -305,7 +328,10 @@ static bool recent_mt_check(const struct
- 		      XT_RECENT_CHECK | XT_RECENT_UPDATE)) != 1)
- 		return false;
- 	if ((info->check_set & (XT_RECENT_SET | XT_RECENT_REMOVE)) &&
--	    (info->seconds || info->hit_count))
-+	    (info->seconds || info->hit_count ||
-+	    (info->check_set & XT_RECENT_MODIFIERS)))
-+		return false;
-+	if ((info->check_set & XT_RECENT_REAP) && !info->seconds)
- 		return false;
- 	if (info->hit_count > ip_pkt_list_tot) {
- 		pr_info(KBUILD_MODNAME ": hitcount (%u) is larger than "

target/linux/generic/patches-2.6.34/180-netfilter_depends.patch

@@ -1,18 +0,0 @@
---- a/net/netfilter/Kconfig
-+++ b/net/netfilter/Kconfig
-@@ -173,7 +173,6 @@ config NF_CONNTRACK_FTP
- 
- config NF_CONNTRACK_H323
- 	tristate "H.323 protocol support"
--	depends on (IPV6 || IPV6=n)
- 	depends on NETFILTER_ADVANCED
- 	help
- 	  H.323 is a VoIP signalling protocol from ITU-T. As one of the most
-@@ -518,7 +517,6 @@ config NETFILTER_XT_TARGET_SECMARK
- 
- config NETFILTER_XT_TARGET_TCPMSS
- 	tristate '"TCPMSS" target support'
--	depends on (IPV6 || IPV6=n)
- 	default m if NETFILTER_ADVANCED=n
- 	---help---
- 	  This option adds a `TCPMSS' target, which allows you to alter the

target/linux/generic/patches-2.6.34/190-netfilter_rtsp.patch

@@ -1,1366 +0,0 @@
---- /dev/null
-+++ b/include/linux/netfilter/nf_conntrack_rtsp.h
-@@ -0,0 +1,63 @@
-+/*
-+ * RTSP extension for IP connection tracking.
-+ * (C) 2003 by Tom Marshall <tmarshall at real.com>
-+ * based on ip_conntrack_irc.h
-+ *
-+ *      This program is free software; you can redistribute it and/or
-+ *      modify it under the terms of the GNU General Public License
-+ *      as published by the Free Software Foundation; either version
-+ *      2 of the License, or (at your option) any later version.
-+ */
-+#ifndef _IP_CONNTRACK_RTSP_H
-+#define _IP_CONNTRACK_RTSP_H
-+
-+//#define IP_NF_RTSP_DEBUG 1
-+#define IP_NF_RTSP_VERSION "0.6.21"
-+
-+#ifdef __KERNEL__
-+/* port block types */
-+typedef enum {
-+    pb_single,  /* client_port=x */
-+    pb_range,   /* client_port=x-y */
-+    pb_discon   /* client_port=x/y (rtspbis) */
-+} portblock_t;
-+
-+/* We record seq number and length of rtsp headers here, all in host order. */
-+
-+/*
-+ * This structure is per expected connection.  It is a member of struct
-+ * ip_conntrack_expect.  The TCP SEQ for the conntrack expect is stored
-+ * there and we are expected to only store the length of the data which
-+ * needs replaced.  If a packet contains multiple RTSP messages, we create
-+ * one expected connection per message.
-+ *
-+ * We use these variables to mark the entire header block.  This may seem
-+ * like overkill, but the nature of RTSP requires it.  A header may appear
-+ * multiple times in a message.  We must treat two Transport headers the
-+ * same as one Transport header with two entries.
-+ */
-+struct ip_ct_rtsp_expect
-+{
-+    u_int32_t   len;        /* length of header block */
-+    portblock_t pbtype;     /* Type of port block that was requested */
-+    u_int16_t   loport;     /* Port that was requested, low or first */
-+    u_int16_t   hiport;     /* Port that was requested, high or second */
-+#if 0
-+    uint        method;     /* RTSP method */
-+    uint        cseq;       /* CSeq from request */
-+#endif
-+};
-+
-+extern unsigned int (*nf_nat_rtsp_hook)(struct sk_buff *skb,
-+				 enum ip_conntrack_info ctinfo,
-+				 unsigned int matchoff, unsigned int matchlen,
-+				 struct ip_ct_rtsp_expect *prtspexp,
-+				 struct nf_conntrack_expect *exp);
-+
-+extern void (*nf_nat_rtsp_hook_expectfn)(struct nf_conn *ct, struct nf_conntrack_expect *exp);
-+
-+#define RTSP_PORT   554
-+
-+#endif /* __KERNEL__ */
-+
-+#endif /* _IP_CONNTRACK_RTSP_H */
---- /dev/null
-+++ b/include/linux/netfilter_helpers.h
-@@ -0,0 +1,133 @@
-+/*
-+ * Helpers for netfiler modules.  This file provides implementations for basic
-+ * functions such as strncasecmp(), etc.
-+ *
-+ * gcc will warn for defined but unused functions, so we only include the
-+ * functions requested.  The following macros are used:
-+ *   NF_NEED_STRNCASECMP        nf_strncasecmp()
-+ *   NF_NEED_STRTOU16           nf_strtou16()
-+ *   NF_NEED_STRTOU32           nf_strtou32()
-+ */
-+#ifndef _NETFILTER_HELPERS_H
-+#define _NETFILTER_HELPERS_H
-+
-+/* Only include these functions for kernel code. */
-+#ifdef __KERNEL__
-+
-+#include <linux/ctype.h>
-+#define iseol(c) ( (c) == '\r' || (c) == '\n' )
-+
-+/*
-+ * The standard strncasecmp()
-+ */
-+#ifdef NF_NEED_STRNCASECMP
-+static int
-+nf_strncasecmp(const char* s1, const char* s2, u_int32_t len)
-+{
-+    if (s1 == NULL || s2 == NULL)
-+    {
-+        if (s1 == NULL && s2 == NULL)
-+        {
-+            return 0;
-+        }
-+        return (s1 == NULL) ? -1 : 1;
-+    }
-+    while (len > 0 && tolower(*s1) == tolower(*s2))
-+    {
-+        len--;
-+        s1++;
-+        s2++;
-+    }
-+    return ( (len == 0) ? 0 : (tolower(*s1) - tolower(*s2)) );
-+}
-+#endif /* NF_NEED_STRNCASECMP */
-+
-+/*
-+ * Parse a string containing a 16-bit unsigned integer.
-+ * Returns the number of chars used, or zero if no number is found.
-+ */
-+#ifdef NF_NEED_STRTOU16
-+static int
-+nf_strtou16(const char* pbuf, u_int16_t* pval)
-+{
-+    int n = 0;
-+
-+    *pval = 0;
-+    while (isdigit(pbuf[n]))
-+    {
-+        *pval = (*pval * 10) + (pbuf[n] - '0');
-+        n++;
-+    }
-+
-+    return n;
-+}
-+#endif /* NF_NEED_STRTOU16 */
-+
-+/*
-+ * Parse a string containing a 32-bit unsigned integer.
-+ * Returns the number of chars used, or zero if no number is found.
-+ */
-+#ifdef NF_NEED_STRTOU32
-+static int
-+nf_strtou32(const char* pbuf, u_int32_t* pval)
-+{
-+    int n = 0;
-+
-+    *pval = 0;
-+    while (pbuf[n] >= '0' && pbuf[n] <= '9')
-+    {
-+        *pval = (*pval * 10) + (pbuf[n] - '0');
-+        n++;
-+    }
-+
-+    return n;
-+}
-+#endif /* NF_NEED_STRTOU32 */
-+
-+/*
-+ * Given a buffer and length, advance to the next line and mark the current
-+ * line.
-+ */
-+#ifdef NF_NEED_NEXTLINE
-+static int
-+nf_nextline(char* p, uint len, uint* poff, uint* plineoff, uint* plinelen)
-+{
-+    uint    off = *poff;
-+    uint    physlen = 0;
-+
-+    if (off >= len)
-+    {
-+        return 0;
-+    }
-+
-+    while (p[off] != '\n')
-+    {
-+        if (len-off <= 1)
-+        {
-+            return 0;
-+        }
-+
-+        physlen++;
-+        off++;
-+    }
-+
-+    /* if we saw a crlf, physlen needs adjusted */
-+    if (physlen > 0 && p[off] == '\n' && p[off-1] == '\r')
-+    {
-+        physlen--;
-+    }
-+
-+    /* advance past the newline */
-+    off++;
-+
-+    *plineoff = *poff;
-+    *plinelen = physlen;
-+    *poff = off;
-+
-+    return 1;
-+}
-+#endif /* NF_NEED_NEXTLINE */
-+
-+#endif /* __KERNEL__ */
-+
-+#endif /* _NETFILTER_HELPERS_H */
---- /dev/null
-+++ b/include/linux/netfilter_mime.h
-@@ -0,0 +1,89 @@
-+/*
-+ * MIME functions for netfilter modules.  This file provides implementations
-+ * for basic MIME parsing.  MIME headers are used in many protocols, such as
-+ * HTTP, RTSP, SIP, etc.
-+ *
-+ * gcc will warn for defined but unused functions, so we only include the
-+ * functions requested.  The following macros are used:
-+ *   NF_NEED_MIME_NEXTLINE      nf_mime_nextline()
-+ */
-+#ifndef _NETFILTER_MIME_H
-+#define _NETFILTER_MIME_H
-+
-+/* Only include these functions for kernel code. */
-+#ifdef __KERNEL__
-+
-+#include <linux/ctype.h>
-+
-+/*
-+ * Given a buffer and length, advance to the next line and mark the current
-+ * line.  If the current line is empty, *plinelen will be set to zero.  If
-+ * not, it will be set to the actual line length (including CRLF).
-+ *
-+ * 'line' in this context means logical line (includes LWS continuations).
-+ * Returns 1 on success, 0 on failure.
-+ */
-+#ifdef NF_NEED_MIME_NEXTLINE
-+static int
-+nf_mime_nextline(char* p, uint len, uint* poff, uint* plineoff, uint* plinelen)
-+{
-+    uint    off = *poff;
-+    uint    physlen = 0;
-+    int     is_first_line = 1;
-+
-+    if (off >= len)
-+    {
-+        return 0;
-+    }
-+
-+    do
-+    {
-+        while (p[off] != '\n')
-+        {
-+            if (len-off <= 1)
-+            {
-+                return 0;
-+            }
-+
-+            physlen++;
-+            off++;
-+        }
-+
-+        /* if we saw a crlf, physlen needs adjusted */
-+        if (physlen > 0 && p[off] == '\n' && p[off-1] == '\r')
-+        {
-+            physlen--;
-+        }
-+
-+        /* advance past the newline */
-+        off++;
-+
-+        /* check for an empty line */
-+        if (physlen == 0)
-+        {
-+            break;
-+        }
-+
-+        /* check for colon on the first physical line */
-+        if (is_first_line)
-+        {
-+            is_first_line = 0;
-+            if (memchr(p+(*poff), ':', physlen) == NULL)
-+            {
-+                return 0;
-+            }
-+        }
-+    }
-+    while (p[off] == ' ' || p[off] == '\t');
-+
-+    *plineoff = *poff;
-+    *plinelen = (physlen == 0) ? 0 : (off - *poff);
-+    *poff = off;
-+
-+    return 1;
-+}
-+#endif /* NF_NEED_MIME_NEXTLINE */
-+
-+#endif /* __KERNEL__ */
-+
-+#endif /* _NETFILTER_MIME_H */
---- a/net/ipv4/netfilter/Makefile
-+++ b/net/ipv4/netfilter/Makefile
-@@ -26,6 +26,7 @@ obj-$(CONFIG_NF_NAT_AMANDA) += nf_nat_am
- obj-$(CONFIG_NF_NAT_FTP) += nf_nat_ftp.o
- obj-$(CONFIG_NF_NAT_H323) += nf_nat_h323.o
- obj-$(CONFIG_NF_NAT_IRC) += nf_nat_irc.o
-+obj-$(CONFIG_NF_NAT_RTSP) += nf_nat_rtsp.o
- obj-$(CONFIG_NF_NAT_PPTP) += nf_nat_pptp.o
- obj-$(CONFIG_NF_NAT_SIP) += nf_nat_sip.o
- obj-$(CONFIG_NF_NAT_SNMP_BASIC) += nf_nat_snmp_basic.o
---- a/net/netfilter/Kconfig
-+++ b/net/netfilter/Kconfig
-@@ -280,6 +280,16 @@ config NF_CONNTRACK_TFTP
- 
- 	  To compile it as a module, choose M here.  If unsure, say N.
- 
-+config NF_CONNTRACK_RTSP
-+	tristate "RTSP protocol support"
-+	depends on NF_CONNTRACK
-+	help
-+		Support the RTSP protocol.  This allows UDP transports to be setup
-+		properly, including RTP and RDT.
-+
-+		If you want to compile it as a module, say 'M' here and read
-+		Documentation/modules.txt.  If unsure, say 'Y'.
-+
- config NF_CT_NETLINK
- 	tristate 'Connection tracking netlink interface'
- 	select NETFILTER_NETLINK
---- a/net/netfilter/Makefile
-+++ b/net/netfilter/Makefile
-@@ -33,6 +33,7 @@ obj-$(CONFIG_NF_CONNTRACK_PPTP) += nf_co
- obj-$(CONFIG_NF_CONNTRACK_SANE) += nf_conntrack_sane.o
- obj-$(CONFIG_NF_CONNTRACK_SIP) += nf_conntrack_sip.o
- obj-$(CONFIG_NF_CONNTRACK_TFTP) += nf_conntrack_tftp.o
-+obj-$(CONFIG_NF_CONNTRACK_RTSP) += nf_conntrack_rtsp.o
- 
- # transparent proxy support
- obj-$(CONFIG_NETFILTER_TPROXY) += nf_tproxy_core.o
---- a/net/ipv4/netfilter/Kconfig
-+++ b/net/ipv4/netfilter/Kconfig
-@@ -257,6 +257,11 @@ config NF_NAT_IRC
- 	depends on NF_CONNTRACK && NF_NAT
- 	default NF_NAT && NF_CONNTRACK_IRC
- 
-+config NF_NAT_RTSP
-+	tristate
-+ 	depends on IP_NF_IPTABLES && NF_CONNTRACK && NF_NAT
-+ 	default NF_NAT && NF_CONNTRACK_RTSP
-+
- config NF_NAT_TFTP
- 	tristate
- 	depends on NF_CONNTRACK && NF_NAT
---- /dev/null
-+++ b/net/netfilter/nf_conntrack_rtsp.c
-@@ -0,0 +1,517 @@
-+/*
-+ * RTSP extension for IP connection tracking
-+ * (C) 2003 by Tom Marshall <tmarshall at real.com>
-+ * based on ip_conntrack_irc.c
-+ *
-+ *      This program is free software; you can redistribute it and/or
-+ *      modify it under the terms of the GNU General Public License
-+ *      as published by the Free Software Foundation; either version
-+ *      2 of the License, or (at your option) any later version.
-+ *
-+ * Module load syntax:
-+ *   insmod nf_conntrack_rtsp.o ports=port1,port2,...port<MAX_PORTS>
-+ *                              max_outstanding=n setup_timeout=secs
-+ *
-+ * If no ports are specified, the default will be port 554.
-+ *
-+ * With max_outstanding you can define the maximum number of not yet
-+ * answered SETUP requests per RTSP session (default 8).
-+ * With setup_timeout you can specify how long the system waits for
-+ * an expected data channel (default 300 seconds).
-+ *
-+ * 2005-02-13: Harald Welte <laforge at netfilter.org>
-+ * 	- port to 2.6
-+ * 	- update to recent post-2.6.11 api changes
-+ * 2006-09-14: Steven Van Acker <deepstar at singularity.be>
-+ *      - removed calls to NAT code from conntrack helper: NAT no longer needed to use rtsp-conntrack
-+ * 2007-04-18: Michael Guntsche <mike at it-loops.com>
-+ * 			- Port to new NF API
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/netfilter.h>
-+#include <linux/ip.h>
-+#include <linux/inet.h>
-+#include <net/tcp.h>
-+
-+#include <net/netfilter/nf_conntrack.h>
-+#include <net/netfilter/nf_conntrack_expect.h>
-+#include <net/netfilter/nf_conntrack_helper.h>
-+#include <linux/netfilter/nf_conntrack_rtsp.h>
-+
-+#define NF_NEED_STRNCASECMP
-+#define NF_NEED_STRTOU16
-+#define NF_NEED_STRTOU32
-+#define NF_NEED_NEXTLINE
-+#include <linux/netfilter_helpers.h>
-+#define NF_NEED_MIME_NEXTLINE
-+#include <linux/netfilter_mime.h>
-+
-+#include <linux/ctype.h>
-+#define MAX_SIMUL_SETUP 8 /* XXX: use max_outstanding */
-+#define INFOP(fmt, args...) printk(KERN_INFO "%s: %s: " fmt, __FILE__, __FUNCTION__ , ## args)
-+#if 0
-+#define DEBUGP(fmt, args...) printk(KERN_DEBUG "%s: %s: " fmt, __FILE__, __FUNCTION__ , ## args)
-+#else
-+#define DEBUGP(fmt, args...)
-+#endif
-+
-+#define MAX_PORTS 8
-+static int ports[MAX_PORTS];
-+static int num_ports = 0;
-+static int max_outstanding = 8;
-+static unsigned int setup_timeout = 300;
-+
-+MODULE_AUTHOR("Tom Marshall <tmarshall at real.com>");
-+MODULE_DESCRIPTION("RTSP connection tracking module");
-+MODULE_LICENSE("GPL");
-+module_param_array(ports, int, &num_ports, 0400);
-+MODULE_PARM_DESC(ports, "port numbers of RTSP servers");
-+module_param(max_outstanding, int, 0400);
-+MODULE_PARM_DESC(max_outstanding, "max number of outstanding SETUP requests per RTSP session");
-+module_param(setup_timeout, int, 0400);
-+MODULE_PARM_DESC(setup_timeout, "timeout on for unestablished data channels");
-+
-+static char *rtsp_buffer;
-+static DEFINE_SPINLOCK(rtsp_buffer_lock);
-+
-+unsigned int (*nf_nat_rtsp_hook)(struct sk_buff *skb,
-+				 enum ip_conntrack_info ctinfo,
-+				 unsigned int matchoff, unsigned int matchlen,struct ip_ct_rtsp_expect* prtspexp,
-+				 struct nf_conntrack_expect *exp);
-+void (*nf_nat_rtsp_hook_expectfn)(struct nf_conn *ct, struct nf_conntrack_expect *exp);
-+
-+EXPORT_SYMBOL_GPL(nf_nat_rtsp_hook);
-+
-+/*
-+ * Max mappings we will allow for one RTSP connection (for RTP, the number
-+ * of allocated ports is twice this value).  Note that SMIL burns a lot of
-+ * ports so keep this reasonably high.  If this is too low, you will see a
-+ * lot of "no free client map entries" messages.
-+ */
-+#define MAX_PORT_MAPS 16
-+
-+/*** default port list was here in the masq code: 554, 3030, 4040 ***/
-+
-+#define SKIP_WSPACE(ptr,len,off) while(off < len && isspace(*(ptr+off))) { off++; }
-+
-+/*
-+ * Parse an RTSP packet.
-+ *
-+ * Returns zero if parsing failed.
-+ *
-+ * Parameters:
-+ *  IN      ptcp        tcp data pointer
-+ *  IN      tcplen      tcp data len
-+ *  IN/OUT  ptcpoff     points to current tcp offset
-+ *  OUT     phdrsoff    set to offset of rtsp headers
-+ *  OUT     phdrslen    set to length of rtsp headers
-+ *  OUT     pcseqoff    set to offset of CSeq header
-+ *  OUT     pcseqlen    set to length of CSeq header
-+ */
-+static int
-+rtsp_parse_message(char* ptcp, uint tcplen, uint* ptcpoff,
-+                   uint* phdrsoff, uint* phdrslen,
-+                   uint* pcseqoff, uint* pcseqlen,
-+                   uint* transoff, uint* translen)
-+{
-+	uint    entitylen = 0;
-+	uint    lineoff;
-+	uint    linelen;
-+
-+	if (!nf_nextline(ptcp, tcplen, ptcpoff, &lineoff, &linelen))
-+		return 0;
-+
-+	*phdrsoff = *ptcpoff;
-+	while (nf_mime_nextline(ptcp, tcplen, ptcpoff, &lineoff, &linelen)) {
-+		if (linelen == 0) {
-+			if (entitylen > 0)
-+				*ptcpoff += min(entitylen, tcplen - *ptcpoff);
-+			break;
-+		}
-+		if (lineoff+linelen > tcplen) {
-+			INFOP("!! overrun !!\n");
-+			break;
-+		}
-+
-+		if (nf_strncasecmp(ptcp+lineoff, "CSeq:", 5) == 0) {
-+			*pcseqoff = lineoff;
-+			*pcseqlen = linelen;
-+		}
-+
-+		if (nf_strncasecmp(ptcp+lineoff, "Transport:", 10) == 0) {
-+			*transoff = lineoff;
-+			*translen = linelen;
-+		}
-+
-+		if (nf_strncasecmp(ptcp+lineoff, "Content-Length:", 15) == 0) {
-+			uint off = lineoff+15;
-+			SKIP_WSPACE(ptcp+lineoff, linelen, off);
-+			nf_strtou32(ptcp+off, &entitylen);
-+		}
-+	}
-+	*phdrslen = (*ptcpoff) - (*phdrsoff);
-+
-+	return 1;
-+}
-+
-+/*
-+ * Find lo/hi client ports (if any) in transport header
-+ * In:
-+ *   ptcp, tcplen = packet
-+ *   tranoff, tranlen = buffer to search
-+ *
-+ * Out:
-+ *   pport_lo, pport_hi = lo/hi ports (host endian)
-+ *
-+ * Returns nonzero if any client ports found
-+ *
-+ * Note: it is valid (and expected) for the client to request multiple
-+ * transports, so we need to parse the entire line.
-+ */
-+static int
-+rtsp_parse_transport(char* ptran, uint tranlen,
-+                     struct ip_ct_rtsp_expect* prtspexp)
-+{
-+	int     rc = 0;
-+	uint    off = 0;
-+
-+	if (tranlen < 10 || !iseol(ptran[tranlen-1]) ||
-+	    nf_strncasecmp(ptran, "Transport:", 10) != 0) {
-+		INFOP("sanity check failed\n");
-+		return 0;
-+	}
-+
-+	DEBUGP("tran='%.*s'\n", (int)tranlen, ptran);
-+	off += 10;
-+	SKIP_WSPACE(ptran, tranlen, off);
-+
-+	/* Transport: tran;field;field=val,tran;field;field=val,... */
-+	while (off < tranlen) {
-+		const char* pparamend;
-+		uint        nextparamoff;
-+
-+		pparamend = memchr(ptran+off, ',', tranlen-off);
-+		pparamend = (pparamend == NULL) ? ptran+tranlen : pparamend+1;
-+		nextparamoff = pparamend-ptran;
-+
-+		while (off < nextparamoff) {
-+			const char* pfieldend;
-+			uint        nextfieldoff;
-+
-+			pfieldend = memchr(ptran+off, ';', nextparamoff-off);
-+			nextfieldoff = (pfieldend == NULL) ? nextparamoff : pfieldend-ptran+1;
-+
-+			if (strncmp(ptran+off, "client_port=", 12) == 0) {
-+				u_int16_t   port;
-+				uint        numlen;
-+
-+				off += 12;
-+				numlen = nf_strtou16(ptran+off, &port);
-+				off += numlen;
-+				if (prtspexp->loport != 0 && prtspexp->loport != port)
-+					DEBUGP("multiple ports found, port %hu ignored\n", port);
-+				else {
-+					DEBUGP("lo port found : %hu\n", port);
-+					prtspexp->loport = prtspexp->hiport = port;
-+					if (ptran[off] == '-') {
-+						off++;
-+						numlen = nf_strtou16(ptran+off, &port);
-+						off += numlen;
-+						prtspexp->pbtype = pb_range;
-+						prtspexp->hiport = port;
-+
-+						// If we have a range, assume rtp:
-+						// loport must be even, hiport must be loport+1
-+						if ((prtspexp->loport & 0x0001) != 0 ||
-+						    prtspexp->hiport != prtspexp->loport+1) {
-+							DEBUGP("incorrect range: %hu-%hu, correcting\n",
-+							       prtspexp->loport, prtspexp->hiport);
-+							prtspexp->loport &= 0xfffe;
-+							prtspexp->hiport = prtspexp->loport+1;
-+						}
-+					} else if (ptran[off] == '/') {
-+						off++;
-+						numlen = nf_strtou16(ptran+off, &port);
-+						off += numlen;
-+						prtspexp->pbtype = pb_discon;
-+						prtspexp->hiport = port;
-+					}
-+					rc = 1;
-+				}
-+			}
-+
-+			/*
-+			 * Note we don't look for the destination parameter here.
-+			 * If we are using NAT, the NAT module will handle it.  If not,
-+			 * and the client is sending packets elsewhere, the expectation
-+			 * will quietly time out.
-+			 */
-+
-+			off = nextfieldoff;
-+		}
-+
-+		off = nextparamoff;
-+	}
-+
-+	return rc;
-+}
-+
-+void expected(struct nf_conn *ct, struct nf_conntrack_expect *exp)
-+{
-+    if(nf_nat_rtsp_hook_expectfn) {
-+        nf_nat_rtsp_hook_expectfn(ct,exp);
-+    }
-+}
-+
-+/*** conntrack functions ***/
-+
-+/* outbound packet: client->server */
-+
-+static inline int
-+help_out(struct sk_buff *skb, unsigned char *rb_ptr, unsigned int datalen,
-+                struct nf_conn *ct, enum ip_conntrack_info ctinfo)
-+{
-+	struct ip_ct_rtsp_expect expinfo;
-+
-+	int dir = CTINFO2DIR(ctinfo);   /* = IP_CT_DIR_ORIGINAL */
-+	//struct  tcphdr* tcph = (void*)iph + iph->ihl * 4;
-+	//uint    tcplen = pktlen - iph->ihl * 4;
-+	char*   pdata = rb_ptr;
-+	//uint    datalen = tcplen - tcph->doff * 4;
-+	uint    dataoff = 0;
-+	int ret = NF_ACCEPT;
-+
-+	struct nf_conntrack_expect *exp;
-+
-+	__be16 be_loport;
-+
-+	memset(&expinfo, 0, sizeof(expinfo));
-+
-+	while (dataoff < datalen) {
-+		uint    cmdoff = dataoff;
-+		uint    hdrsoff = 0;
-+		uint    hdrslen = 0;
-+		uint    cseqoff = 0;
-+		uint    cseqlen = 0;
-+		uint    transoff = 0;
-+		uint    translen = 0;
-+		uint    off;
-+
-+		if (!rtsp_parse_message(pdata, datalen, &dataoff,
-+					&hdrsoff, &hdrslen,
-+					&cseqoff, &cseqlen,
-+					&transoff, &translen))
-+			break;      /* not a valid message */
-+
-+		if (strncmp(pdata+cmdoff, "SETUP ", 6) != 0)
-+			continue;   /* not a SETUP message */
-+		DEBUGP("found a setup message\n");
-+
-+		off = 0;
-+		if(translen) {
-+			rtsp_parse_transport(pdata+transoff, translen, &expinfo);
-+		}
-+
-+		if (expinfo.loport == 0) {
-+			DEBUGP("no udp transports found\n");
-+			continue;   /* no udp transports found */
-+		}
-+
-+		DEBUGP("udp transport found, ports=(%d,%hu,%hu)\n",
-+		       (int)expinfo.pbtype, expinfo.loport, expinfo.hiport);
-+
-+		exp = nf_ct_expect_alloc(ct);
-+		if (!exp) {
-+			ret = NF_DROP;
-+			goto out;
-+		}
-+
-+		be_loport = htons(expinfo.loport);
-+
-+		nf_ct_expect_init(exp, NF_CT_EXPECT_CLASS_DEFAULT,
-+			ct->tuplehash[!dir].tuple.src.l3num,
-+			&ct->tuplehash[!dir].tuple.src.u3, &ct->tuplehash[!dir].tuple.dst.u3,
-+			IPPROTO_UDP, NULL, &be_loport);
-+
-+		exp->master = ct;
-+
-+		exp->expectfn = expected;
-+		exp->flags = 0;
-+
-+		if (expinfo.pbtype == pb_range) {
-+			DEBUGP("Changing expectation mask to handle multiple ports\n");
-+			exp->mask.src.u.udp.port  = 0xfffe;
-+		}
-+
-+		DEBUGP("expect_related %u.%u.%u.%u:%u-%u.%u.%u.%u:%u\n",
-+		       NIPQUAD(exp->tuple.src.u3.ip),
-+		       ntohs(exp->tuple.src.u.udp.port),
-+		       NIPQUAD(exp->tuple.dst.u3.ip),
-+		       ntohs(exp->tuple.dst.u.udp.port));
-+
-+		if (nf_nat_rtsp_hook)
-+			/* pass the request off to the nat helper */
-+			ret = nf_nat_rtsp_hook(skb, ctinfo, hdrsoff, hdrslen, &expinfo, exp);
-+		else if (nf_ct_expect_related(exp) != 0) {
-+			INFOP("nf_ct_expect_related failed\n");
-+			ret  = NF_DROP;
-+		}
-+		nf_ct_expect_put(exp);
-+		goto out;
-+	}
-+out:
-+
-+	return ret;
-+}
-+
-+
-+static inline int
-+help_in(struct sk_buff *skb, size_t pktlen,
-+ struct nf_conn* ct, enum ip_conntrack_info ctinfo)
-+{
-+ return NF_ACCEPT;
-+}
-+
-+static int help(struct sk_buff *skb, unsigned int protoff,
-+		struct nf_conn *ct, enum ip_conntrack_info ctinfo)
-+{
-+	struct tcphdr _tcph, *th;
-+	unsigned int dataoff, datalen;
-+	char *rb_ptr;
-+	int ret = NF_DROP;
-+
-+	/* Until there's been traffic both ways, don't look in packets. */
-+	if (ctinfo != IP_CT_ESTABLISHED &&
-+	    ctinfo != IP_CT_ESTABLISHED + IP_CT_IS_REPLY) {
-+		DEBUGP("conntrackinfo = %u\n", ctinfo);
-+		return NF_ACCEPT;
-+	}
-+
-+	/* Not whole TCP header? */
-+	th = skb_header_pointer(skb, protoff, sizeof(_tcph), &_tcph);
-+
-+	if (!th)
-+		return NF_ACCEPT;
-+
-+	/* No data ? */
-+	dataoff = protoff + th->doff*4;
-+	datalen = skb->len - dataoff;
-+	if (dataoff >= skb->len)
-+		return NF_ACCEPT;
-+
-+	spin_lock_bh(&rtsp_buffer_lock);
-+	rb_ptr = skb_header_pointer(skb, dataoff,
-+				    skb->len - dataoff, rtsp_buffer);
-+	BUG_ON(rb_ptr == NULL);
-+
-+#if 0
-+	/* Checksum invalid?  Ignore. */
-+	/* FIXME: Source route IP option packets --RR */
-+	if (tcp_v4_check(tcph, tcplen, iph->saddr, iph->daddr,
-+			 csum_partial((char*)tcph, tcplen, 0)))
-+	{
-+		DEBUGP("bad csum: %p %u %u.%u.%u.%u %u.%u.%u.%u\n",
-+		       tcph, tcplen, NIPQUAD(iph->saddr), NIPQUAD(iph->daddr));
-+		return NF_ACCEPT;
-+	}
-+#endif
-+
-+	switch (CTINFO2DIR(ctinfo)) {
-+	case IP_CT_DIR_ORIGINAL:
-+		ret = help_out(skb, rb_ptr, datalen, ct, ctinfo);
-+		break;
-+	case IP_CT_DIR_REPLY:
-+		DEBUGP("IP_CT_DIR_REPLY\n");
-+		/* inbound packet: server->client */
-+		ret = NF_ACCEPT;
-+		break;
-+	}
-+
-+	spin_unlock_bh(&rtsp_buffer_lock);
-+
-+	return ret;
-+}
-+
-+static struct nf_conntrack_helper rtsp_helpers[MAX_PORTS];
-+static char rtsp_names[MAX_PORTS][10];
-+static struct nf_conntrack_expect_policy rtsp_expect_policy;
-+
-+/* This function is intentionally _NOT_ defined as __exit */
-+static void
-+fini(void)
-+{
-+	int i;
-+	for (i = 0; i < num_ports; i++) {
-+		DEBUGP("unregistering port %d\n", ports[i]);
-+		nf_conntrack_helper_unregister(&rtsp_helpers[i]);
-+	}
-+	kfree(rtsp_buffer);
-+}
-+
-+static int __init
-+init(void)
-+{
-+	int i, ret;
-+	struct nf_conntrack_helper *hlpr;
-+	char *tmpname;
-+
-+	printk("nf_conntrack_rtsp v" IP_NF_RTSP_VERSION " loading\n");
-+
-+	if (max_outstanding < 1) {
-+		printk("nf_conntrack_rtsp: max_outstanding must be a positive integer\n");
-+		return -EBUSY;
-+	}
-+	if (setup_timeout < 0) {
-+		printk("nf_conntrack_rtsp: setup_timeout must be a positive integer\n");
-+		return -EBUSY;
-+	}
-+
-+	rtsp_expect_policy.max_expected = max_outstanding;
-+	rtsp_expect_policy.timeout = setup_timeout;
-+
-+	rtsp_buffer = kmalloc(65536, GFP_KERNEL);
-+	if (!rtsp_buffer)
-+		return -ENOMEM;
-+
-+	/* If no port given, default to standard rtsp port */
-+	if (ports[0] == 0) {
-+		ports[0] = RTSP_PORT;
-+	}
-+
-+	for (i = 0; (i < MAX_PORTS) && ports[i]; i++) {
-+		hlpr = &rtsp_helpers[i];
-+		memset(hlpr, 0, sizeof(struct nf_conntrack_helper));
-+		hlpr->tuple.src.u.tcp.port = htons(ports[i]);
-+		hlpr->tuple.dst.protonum = IPPROTO_TCP;
-+		hlpr->expect_policy = &rtsp_expect_policy;
-+		hlpr->me = THIS_MODULE;
-+		hlpr->help = help;
-+
-+		tmpname = &rtsp_names[i][0];
-+		if (ports[i] == RTSP_PORT) {
-+			sprintf(tmpname, "rtsp");
-+		} else {
-+			sprintf(tmpname, "rtsp-%d", i);
-+		}
-+		hlpr->name = tmpname;
-+
-+		DEBUGP("port #%d: %d\n", i, ports[i]);
-+
-+		ret = nf_conntrack_helper_register(hlpr);
-+
-+		if (ret) {
-+			printk("nf_conntrack_rtsp: ERROR registering port %d\n", ports[i]);
-+			fini();
-+			return -EBUSY;
-+		}
-+		num_ports++;
-+	}
-+	return 0;
-+}
-+
-+module_init(init);
-+module_exit(fini);
-+
-+EXPORT_SYMBOL(nf_nat_rtsp_hook_expectfn);
-+
---- /dev/null
-+++ b/net/ipv4/netfilter/nf_nat_rtsp.c
-@@ -0,0 +1,496 @@
-+/*
-+ * RTSP extension for TCP NAT alteration
-+ * (C) 2003 by Tom Marshall <tmarshall at real.com>
-+ * based on ip_nat_irc.c
-+ *
-+ *      This program is free software; you can redistribute it and/or
-+ *      modify it under the terms of the GNU General Public License
-+ *      as published by the Free Software Foundation; either version
-+ *      2 of the License, or (at your option) any later version.
-+ *
-+ * Module load syntax:
-+ *      insmod nf_nat_rtsp.o ports=port1,port2,...port<MAX_PORTS>
-+ *                           stunaddr=<address>
-+ *                           destaction=[auto|strip|none]
-+ *
-+ * If no ports are specified, the default will be port 554 only.
-+ *
-+ * stunaddr specifies the address used to detect that a client is using STUN.
-+ * If this address is seen in the destination parameter, it is assumed that
-+ * the client has already punched a UDP hole in the firewall, so we don't
-+ * mangle the client_port.  If none is specified, it is autodetected.  It
-+ * only needs to be set if you have multiple levels of NAT.  It should be
-+ * set to the external address that the STUN clients detect.  Note that in
-+ * this case, it will not be possible for clients to use UDP with servers
-+ * between the NATs.
-+ *
-+ * If no destaction is specified, auto is used.
-+ *   destaction=auto:  strip destination parameter if it is not stunaddr.
-+ *   destaction=strip: always strip destination parameter (not recommended).
-+ *   destaction=none:  do not touch destination parameter (not recommended).
-+ */
-+
-+#include <linux/module.h>
-+#include <net/tcp.h>
-+#include <net/netfilter/nf_nat_helper.h>
-+#include <net/netfilter/nf_nat_rule.h>
-+#include <linux/netfilter/nf_conntrack_rtsp.h>
-+#include <net/netfilter/nf_conntrack_expect.h>
-+
-+#include <linux/inet.h>
-+#include <linux/ctype.h>
-+#define NF_NEED_STRNCASECMP
-+#define NF_NEED_STRTOU16
-+#include <linux/netfilter_helpers.h>
-+#define NF_NEED_MIME_NEXTLINE
-+#include <linux/netfilter_mime.h>
-+
-+#define INFOP(fmt, args...) printk(KERN_INFO "%s: %s: " fmt, __FILE__, __FUNCTION__ , ## args)
-+#if 0
-+#define DEBUGP(fmt, args...) printk(KERN_DEBUG "%s: %s: " fmt, __FILE__, __FUNCTION__ , ## args)
-+#else
-+#define DEBUGP(fmt, args...)
-+#endif
-+
-+#define MAX_PORTS       8
-+#define DSTACT_AUTO     0
-+#define DSTACT_STRIP    1
-+#define DSTACT_NONE     2
-+
-+static char*    stunaddr = NULL;
-+static char*    destaction = NULL;
-+
-+static u_int32_t extip = 0;
-+static int       dstact = 0;
-+
-+MODULE_AUTHOR("Tom Marshall <tmarshall at real.com>");
-+MODULE_DESCRIPTION("RTSP network address translation module");
-+MODULE_LICENSE("GPL");
-+module_param(stunaddr, charp, 0644);
-+MODULE_PARM_DESC(stunaddr, "Address for detecting STUN");
-+module_param(destaction, charp, 0644);
-+MODULE_PARM_DESC(destaction, "Action for destination parameter (auto/strip/none)");
-+
-+#define SKIP_WSPACE(ptr,len,off) while(off < len && isspace(*(ptr+off))) { off++; }
-+
-+/*** helper functions ***/
-+
-+static void
-+get_skb_tcpdata(struct sk_buff* skb, char** pptcpdata, uint* ptcpdatalen)
-+{
-+    struct iphdr*   iph  = ip_hdr(skb);
-+    struct tcphdr*  tcph = (void *)iph + ip_hdrlen(skb);
-+
-+    *pptcpdata = (char*)tcph +  tcph->doff*4;
-+    *ptcpdatalen = ((char*)skb_transport_header(skb) + skb->len) - *pptcpdata;
-+}
-+
-+/*** nat functions ***/
-+
-+/*
-+ * Mangle the "Transport:" header:
-+ *   - Replace all occurences of "client_port=<spec>"
-+ *   - Handle destination parameter
-+ *
-+ * In:
-+ *   ct, ctinfo = conntrack context
-+ *   skb        = packet
-+ *   tranoff    = Transport header offset from TCP data
-+ *   tranlen    = Transport header length (incl. CRLF)
-+ *   rport_lo   = replacement low  port (host endian)
-+ *   rport_hi   = replacement high port (host endian)
-+ *
-+ * Returns packet size difference.
-+ *
-+ * Assumes that a complete transport header is present, ending with CR or LF
-+ */
-+static int
-+rtsp_mangle_tran(enum ip_conntrack_info ctinfo,
-+                 struct nf_conntrack_expect* exp,
-+								 struct ip_ct_rtsp_expect* prtspexp,
-+                 struct sk_buff* skb, uint tranoff, uint tranlen)
-+{
-+    char*       ptcp;
-+    uint        tcplen;
-+    char*       ptran;
-+    char        rbuf1[16];      /* Replacement buffer (one port) */
-+    uint        rbuf1len;       /* Replacement len (one port) */
-+    char        rbufa[16];      /* Replacement buffer (all ports) */
-+    uint        rbufalen;       /* Replacement len (all ports) */
-+    u_int32_t   newip;
-+    u_int16_t   loport, hiport;
-+    uint        off = 0;
-+    uint        diff;           /* Number of bytes we removed */
-+
-+    struct nf_conn *ct = exp->master;
-+    struct nf_conntrack_tuple *t;
-+
-+    char    szextaddr[15+1];
-+    uint    extaddrlen;
-+    int     is_stun;
-+
-+    get_skb_tcpdata(skb, &ptcp, &tcplen);
-+    ptran = ptcp+tranoff;
-+
-+    if (tranoff+tranlen > tcplen || tcplen-tranoff < tranlen ||
-+        tranlen < 10 || !iseol(ptran[tranlen-1]) ||
-+        nf_strncasecmp(ptran, "Transport:", 10) != 0)
-+    {
-+        INFOP("sanity check failed\n");
-+        return 0;
-+    }
-+    off += 10;
-+    SKIP_WSPACE(ptcp+tranoff, tranlen, off);
-+
-+    newip = ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u3.ip;
-+    t = &exp->tuple;
-+    t->dst.u3.ip = newip;
-+
-+    extaddrlen = extip ? sprintf(szextaddr, "%u.%u.%u.%u", NIPQUAD(extip))
-+                       : sprintf(szextaddr, "%u.%u.%u.%u", NIPQUAD(newip));
-+    DEBUGP("stunaddr=%s (%s)\n", szextaddr, (extip?"forced":"auto"));
-+
-+    rbuf1len = rbufalen = 0;
-+    switch (prtspexp->pbtype)
-+    {
-+    case pb_single:
-+        for (loport = prtspexp->loport; loport != 0; loport++) /* XXX: improper wrap? */
-+        {
-+            t->dst.u.udp.port = htons(loport);
-+            if (nf_ct_expect_related(exp) == 0)
-+            {
-+                DEBUGP("using port %hu\n", loport);
-+                break;
-+            }
-+        }
-+        if (loport != 0)
-+        {
-+            rbuf1len = sprintf(rbuf1, "%hu", loport);
-+            rbufalen = sprintf(rbufa, "%hu", loport);
-+        }
-+        break;
-+    case pb_range:
-+        for (loport = prtspexp->loport; loport != 0; loport += 2) /* XXX: improper wrap? */
-+        {
-+            t->dst.u.udp.port = htons(loport);
-+            if (nf_ct_expect_related(exp) == 0)
-+            {
-+                hiport = loport + ~exp->mask.src.u.udp.port;
-+                DEBUGP("using ports %hu-%hu\n", loport, hiport);
-+                break;
-+            }
-+        }
-+        if (loport != 0)
-+        {
-+            rbuf1len = sprintf(rbuf1, "%hu", loport);
-+            rbufalen = sprintf(rbufa, "%hu-%hu", loport, loport+1);
-+        }
-+        break;
-+    case pb_discon:
-+        for (loport = prtspexp->loport; loport != 0; loport++) /* XXX: improper wrap? */
-+        {
-+            t->dst.u.udp.port = htons(loport);
-+            if (nf_ct_expect_related(exp) == 0)
-+            {
-+                DEBUGP("using port %hu (1 of 2)\n", loport);
-+                break;
-+            }
-+        }
-+        for (hiport = prtspexp->hiport; hiport != 0; hiport++) /* XXX: improper wrap? */
-+        {
-+            t->dst.u.udp.port = htons(hiport);
-+            if (nf_ct_expect_related(exp) == 0)
-+            {
-+                DEBUGP("using port %hu (2 of 2)\n", hiport);
-+                break;
-+            }
-+        }
-+        if (loport != 0 && hiport != 0)
-+        {
-+            rbuf1len = sprintf(rbuf1, "%hu", loport);
-+            if (hiport == loport+1)
-+            {
-+                rbufalen = sprintf(rbufa, "%hu-%hu", loport, hiport);
-+            }
-+            else
-+            {
-+                rbufalen = sprintf(rbufa, "%hu/%hu", loport, hiport);
-+            }
-+        }
-+        break;
-+    }
-+
-+    if (rbuf1len == 0)
-+    {
-+        return 0;   /* cannot get replacement port(s) */
-+    }
-+
-+    /* Transport: tran;field;field=val,tran;field;field=val,... */
-+    while (off < tranlen)
-+    {
-+        uint        saveoff;
-+        const char* pparamend;
-+        uint        nextparamoff;
-+
-+        pparamend = memchr(ptran+off, ',', tranlen-off);
-+        pparamend = (pparamend == NULL) ? ptran+tranlen : pparamend+1;
-+        nextparamoff = pparamend-ptcp;
-+
-+        /*
-+         * We pass over each param twice.  On the first pass, we look for a
-+         * destination= field.  It is handled by the security policy.  If it
-+         * is present, allowed, and equal to our external address, we assume
-+         * that STUN is being used and we leave the client_port= field alone.
-+         */
-+        is_stun = 0;
-+        saveoff = off;
-+        while (off < nextparamoff)
-+        {
-+            const char* pfieldend;
-+            uint        nextfieldoff;
-+
-+            pfieldend = memchr(ptran+off, ';', nextparamoff-off);
-+            nextfieldoff = (pfieldend == NULL) ? nextparamoff : pfieldend-ptran+1;
-+
-+            if (dstact != DSTACT_NONE && strncmp(ptran+off, "destination=", 12) == 0)
-+            {
-+                if (strncmp(ptran+off+12, szextaddr, extaddrlen) == 0)
-+                {
-+                    is_stun = 1;
-+                }
-+                if (dstact == DSTACT_STRIP || (dstact == DSTACT_AUTO && !is_stun))
-+                {
-+                    diff = nextfieldoff-off;
-+                    if (!nf_nat_mangle_tcp_packet(skb, ct, ctinfo,
-+                                                         off, diff, NULL, 0))
-+                    {
-+                        /* mangle failed, all we can do is bail */
-+			nf_ct_unexpect_related(exp);
-+                        return 0;
-+                    }
-+                    get_skb_tcpdata(skb, &ptcp, &tcplen);
-+                    ptran = ptcp+tranoff;
-+                    tranlen -= diff;
-+                    nextparamoff -= diff;
-+                    nextfieldoff -= diff;
-+                }
-+            }
-+
-+            off = nextfieldoff;
-+        }
-+        if (is_stun)
-+        {
-+            continue;
-+        }
-+        off = saveoff;
-+        while (off < nextparamoff)
-+        {
-+            const char* pfieldend;
-+            uint        nextfieldoff;
-+
-+            pfieldend = memchr(ptran+off, ';', nextparamoff-off);
-+            nextfieldoff = (pfieldend == NULL) ? nextparamoff : pfieldend-ptran+1;
-+
-+            if (strncmp(ptran+off, "client_port=", 12) == 0)
-+            {
-+                u_int16_t   port;
-+                uint        numlen;
-+                uint        origoff;
-+                uint        origlen;
-+                char*       rbuf    = rbuf1;
-+                uint        rbuflen = rbuf1len;
-+
-+                off += 12;
-+                origoff = (ptran-ptcp)+off;
-+                origlen = 0;
-+                numlen = nf_strtou16(ptran+off, &port);
-+                off += numlen;
-+                origlen += numlen;
-+                if (port != prtspexp->loport)
-+                {
-+                    DEBUGP("multiple ports found, port %hu ignored\n", port);
-+                }
-+                else
-+                {
-+                    if (ptran[off] == '-' || ptran[off] == '/')
-+                    {
-+                        off++;
-+                        origlen++;
-+                        numlen = nf_strtou16(ptran+off, &port);
-+                        off += numlen;
-+                        origlen += numlen;
-+                        rbuf = rbufa;
-+                        rbuflen = rbufalen;
-+                    }
-+
-+                    /*
-+                     * note we cannot just memcpy() if the sizes are the same.
-+                     * the mangle function does skb resizing, checks for a
-+                     * cloned skb, and updates the checksums.
-+                     *
-+                     * parameter 4 below is offset from start of tcp data.
-+                     */
-+                    diff = origlen-rbuflen;
-+                    if (!nf_nat_mangle_tcp_packet(skb, ct, ctinfo,
-+                                              origoff, origlen, rbuf, rbuflen))
-+                    {
-+                        /* mangle failed, all we can do is bail */
-+			nf_ct_unexpect_related(exp);
-+                        return 0;
-+                    }
-+                    get_skb_tcpdata(skb, &ptcp, &tcplen);
-+                    ptran = ptcp+tranoff;
-+                    tranlen -= diff;
-+                    nextparamoff -= diff;
-+                    nextfieldoff -= diff;
-+                }
-+            }
-+
-+            off = nextfieldoff;
-+        }
-+
-+        off = nextparamoff;
-+    }
-+
-+    return 1;
-+}
-+
-+static uint
-+help_out(struct sk_buff *skb, enum ip_conntrack_info ctinfo,
-+	 unsigned int matchoff, unsigned int matchlen, struct ip_ct_rtsp_expect* prtspexp,
-+	 struct nf_conntrack_expect* exp)
-+{
-+    char*   ptcp;
-+    uint    tcplen;
-+    uint    hdrsoff;
-+    uint    hdrslen;
-+    uint    lineoff;
-+    uint    linelen;
-+    uint    off;
-+
-+    //struct iphdr* iph = (struct iphdr*)skb->nh.iph;
-+    //struct tcphdr* tcph = (struct tcphdr*)((void*)iph + iph->ihl*4);
-+
-+    get_skb_tcpdata(skb, &ptcp, &tcplen);
-+    hdrsoff = matchoff;//exp->seq - ntohl(tcph->seq);
-+    hdrslen = matchlen;
-+    off = hdrsoff;
-+    DEBUGP("NAT rtsp help_out\n");
-+
-+    while (nf_mime_nextline(ptcp, hdrsoff+hdrslen, &off, &lineoff, &linelen))
-+    {
-+        if (linelen == 0)
-+        {
-+            break;
-+        }
-+        if (off > hdrsoff+hdrslen)
-+        {
-+            INFOP("!! overrun !!");
-+            break;
-+        }
-+        DEBUGP("hdr: len=%u, %.*s", linelen, (int)linelen, ptcp+lineoff);
-+
-+        if (nf_strncasecmp(ptcp+lineoff, "Transport:", 10) == 0)
-+        {
-+            uint oldtcplen = tcplen;
-+	    DEBUGP("hdr: Transport\n");
-+            if (!rtsp_mangle_tran(ctinfo, exp, prtspexp, skb, lineoff, linelen))
-+            {
-+		DEBUGP("hdr: Transport mangle failed");
-+                break;
-+            }
-+            get_skb_tcpdata(skb, &ptcp, &tcplen);
-+            hdrslen -= (oldtcplen-tcplen);
-+            off -= (oldtcplen-tcplen);
-+            lineoff -= (oldtcplen-tcplen);
-+            linelen -= (oldtcplen-tcplen);
-+            DEBUGP("rep: len=%u, %.*s", linelen, (int)linelen, ptcp+lineoff);
-+        }
-+    }
-+
-+    return NF_ACCEPT;
-+}
-+
-+static unsigned int
-+help(struct sk_buff *skb, enum ip_conntrack_info ctinfo,
-+     unsigned int matchoff, unsigned int matchlen, struct ip_ct_rtsp_expect* prtspexp,
-+     struct nf_conntrack_expect* exp)
-+{
-+    int dir = CTINFO2DIR(ctinfo);
-+    int rc = NF_ACCEPT;
-+
-+    switch (dir)
-+    {
-+    case IP_CT_DIR_ORIGINAL:
-+        rc = help_out(skb, ctinfo, matchoff, matchlen, prtspexp, exp);
-+        break;
-+    case IP_CT_DIR_REPLY:
-+	DEBUGP("unmangle ! %u\n", ctinfo);
-+    	/* XXX: unmangle */
-+	rc = NF_ACCEPT;
-+        break;
-+    }
-+    //UNLOCK_BH(&ip_rtsp_lock);
-+
-+    return rc;
-+}
-+
-+static void expected(struct nf_conn* ct, struct nf_conntrack_expect *exp)
-+{
-+    struct nf_nat_multi_range_compat mr;
-+    u_int32_t newdstip, newsrcip, newip;
-+
-+    struct nf_conn *master = ct->master;
-+
-+    newdstip = master->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip;
-+    newsrcip = ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip;
-+    //FIXME (how to port that ?)
-+    //code from 2.4 : newip = (HOOK2MANIP(hooknum) == IP_NAT_MANIP_SRC) ? newsrcip : newdstip;
-+    newip = newdstip;
-+
-+    DEBUGP("newsrcip=%u.%u.%u.%u, newdstip=%u.%u.%u.%u, newip=%u.%u.%u.%u\n",
-+           NIPQUAD(newsrcip), NIPQUAD(newdstip), NIPQUAD(newip));
-+
-+    mr.rangesize = 1;
-+    // We don't want to manip the per-protocol, just the IPs.
-+    mr.range[0].flags = IP_NAT_RANGE_MAP_IPS;
-+    mr.range[0].min_ip = mr.range[0].max_ip = newip;
-+
-+    nf_nat_setup_info(ct, &mr.range[0], IP_NAT_MANIP_DST);
-+}
-+
-+
-+static void __exit fini(void)
-+{
-+	nf_nat_rtsp_hook = NULL;
-+        nf_nat_rtsp_hook_expectfn = NULL;
-+	synchronize_net();
-+}
-+
-+static int __init init(void)
-+{
-+	printk("nf_nat_rtsp v" IP_NF_RTSP_VERSION " loading\n");
-+
-+	BUG_ON(nf_nat_rtsp_hook);
-+	nf_nat_rtsp_hook = help;
-+        nf_nat_rtsp_hook_expectfn = &expected;
-+
-+	if (stunaddr != NULL)
-+		extip = in_aton(stunaddr);
-+
-+	if (destaction != NULL) {
-+	        if (strcmp(destaction, "auto") == 0)
-+			dstact = DSTACT_AUTO;
-+
-+		if (strcmp(destaction, "strip") == 0)
-+			dstact = DSTACT_STRIP;
-+
-+		if (strcmp(destaction, "none") == 0)
-+			dstact = DSTACT_NONE;
-+	}
-+
-+	return 0;
-+}
-+
-+module_init(init);
-+module_exit(fini);

target/linux/generic/patches-2.6.34/200-netfilter_xtables_align.patch

@@ -1,50 +0,0 @@
---- a/include/linux/kernel.h
-+++ b/include/linux/kernel.h
-@@ -4,6 +4,8 @@
- /*
-  * 'kernel.h' contains some often-used function prototypes etc
-  */
-+#define __ALIGN_KERNEL(x, a)		__ALIGN_KERNEL_MASK(x, (typeof(x))(a) - 1)
-+#define __ALIGN_KERNEL_MASK(x, mask)	(((x) + (mask)) & ~(mask))
- 
- #ifdef __KERNEL__
- 
-@@ -37,8 +39,8 @@ extern const char linux_proc_banner[];
- 
- #define STACK_MAGIC	0xdeadbeef
- 
--#define ALIGN(x,a)		__ALIGN_MASK(x,(typeof(x))(a)-1)
--#define __ALIGN_MASK(x,mask)	(((x)+(mask))&~(mask))
-+#define ALIGN(x, a)		__ALIGN_KERNEL((x), (a))
-+#define __ALIGN_MASK(x, mask)	__ALIGN_KERNEL_MASK((x), (mask))
- #define PTR_ALIGN(p, a)		((typeof(p))ALIGN((unsigned long)(p), (a)))
- #define IS_ALIGNED(x, a)		(((x) & ((typeof(x))(a) - 1)) == 0)
- 
---- a/include/linux/netfilter/x_tables.h
-+++ b/include/linux/netfilter/x_tables.h
-@@ -1,6 +1,6 @@
- #ifndef _X_TABLES_H
- #define _X_TABLES_H
--
-+#include <linux/kernel.h>
- #include <linux/types.h>
- 
- #define XT_FUNCTION_MAXNAMELEN 30
-@@ -93,7 +93,7 @@ struct _xt_align {
- 	__u64 u64;
- };
- 
--#define XT_ALIGN(s) ALIGN((s), __alignof__(struct _xt_align))
-+#define XT_ALIGN(s) __ALIGN_KERNEL((s), __alignof__(struct _xt_align))
- 
- /* Standard return verdict, or do jump. */
- #define XT_STANDARD_TARGET ""
-@@ -598,7 +598,7 @@ struct _compat_xt_align {
- 	compat_u64 u64;
- };
- 
--#define COMPAT_XT_ALIGN(s) ALIGN((s), __alignof__(struct _compat_xt_align))
-+#define COMPAT_XT_ALIGN(s) __ALIGN_KERNEL((s), __alignof__(struct _compat_xt_align))
- 
- extern void xt_compat_lock(u_int8_t af);
- extern void xt_compat_unlock(u_int8_t af);

target/linux/generic/patches-2.6.34/200-sched_esfq.patch

@@ -1,795 +0,0 @@
---- a/include/linux/pkt_sched.h
-+++ b/include/linux/pkt_sched.h
-@@ -173,8 +173,37 @@ struct tc_sfq_xstats {
-  *
-  *	The only reason for this is efficiency, it is possible
-  *	to change these parameters in compile time.
-+ *
-+ *	If you need to play with these values, use esfq instead.
-  */
- 
-+/* ESFQ section */
-+
-+enum
-+{
-+        /* traditional */
-+	TCA_SFQ_HASH_CLASSIC,
-+	TCA_SFQ_HASH_DST,
-+	TCA_SFQ_HASH_SRC,
-+	TCA_SFQ_HASH_FWMARK,
-+	/* conntrack */
-+	TCA_SFQ_HASH_CTORIGDST,
-+	TCA_SFQ_HASH_CTORIGSRC,
-+	TCA_SFQ_HASH_CTREPLDST,
-+	TCA_SFQ_HASH_CTREPLSRC,
-+	TCA_SFQ_HASH_CTNATCHG,
-+};
-+
-+struct tc_esfq_qopt
-+{
-+	unsigned	quantum;	/* Bytes per round allocated to flow */
-+	int		perturb_period;	/* Period of hash perturbation */
-+	__u32		limit;		/* Maximal packets in queue */
-+	unsigned	divisor;	/* Hash divisor  */
-+	unsigned	flows;		/* Maximal number of flows  */
-+	unsigned	hash_kind;	/* Hash function to use for flow identification */
-+};
-+
- /* RED section */
- 
- enum {
---- a/net/sched/Kconfig
-+++ b/net/sched/Kconfig
-@@ -137,6 +137,37 @@ config NET_SCH_SFQ
- 	  To compile this code as a module, choose M here: the
- 	  module will be called sch_sfq.
- 
-+config NET_SCH_ESFQ
-+	tristate "Enhanced Stochastic Fairness Queueing (ESFQ)"
-+	---help---
-+	  Say Y here if you want to use the Enhanced Stochastic Fairness
-+	  Queueing (ESFQ) packet scheduling algorithm for some of your network
-+	  devices or as a leaf discipline for a classful qdisc such as HTB or
-+	  CBQ (see the top of <file:net/sched/sch_esfq.c> for details and
-+	  references to the SFQ algorithm).
-+
-+	  This is an enchanced SFQ version which allows you to control some
-+	  hardcoded values in the SFQ scheduler.
-+
-+	  ESFQ also adds control of the hash function used to identify packet
-+	  flows. The original SFQ discipline hashes by connection; ESFQ add
-+	  several other hashing methods, such as by src IP or by dst IP, which
-+	  can be more fair to users in some networking situations.
-+
-+	  To compile this code as a module, choose M here: the
-+	  module will be called sch_esfq.
-+
-+config NET_SCH_ESFQ_NFCT
-+	bool "Connection Tracking Hash Types"
-+	depends on NET_SCH_ESFQ && NF_CONNTRACK
-+	---help---
-+	  Say Y here to enable support for hashing based on netfilter connection
-+	  tracking information. This is useful for a router that is also using
-+	  NAT to connect privately-addressed hosts to the Internet. If you want
-+	  to provide fair distribution of upstream bandwidth, ESFQ must use
-+	  connection tracking information, since all outgoing packets will share
-+	  the same source address.
-+
- config NET_SCH_TEQL
- 	tristate "True Link Equalizer (TEQL)"
- 	---help---
---- a/net/sched/Makefile
-+++ b/net/sched/Makefile
-@@ -24,6 +24,7 @@ obj-$(CONFIG_NET_SCH_GRED)	+= sch_gred.o
- obj-$(CONFIG_NET_SCH_INGRESS)	+= sch_ingress.o 
- obj-$(CONFIG_NET_SCH_DSMARK)	+= sch_dsmark.o
- obj-$(CONFIG_NET_SCH_SFQ)	+= sch_sfq.o
-+obj-$(CONFIG_NET_SCH_ESFQ)	+= sch_esfq.o
- obj-$(CONFIG_NET_SCH_TBF)	+= sch_tbf.o
- obj-$(CONFIG_NET_SCH_TEQL)	+= sch_teql.o
- obj-$(CONFIG_NET_SCH_PRIO)	+= sch_prio.o
---- /dev/null
-+++ b/net/sched/sch_esfq.c
-@@ -0,0 +1,702 @@
-+/*
-+ * net/sched/sch_esfq.c	Extended Stochastic Fairness Queueing discipline.
-+ *
-+ *		This program is free software; you can redistribute it and/or
-+ *		modify it under the terms of the GNU General Public License
-+ *		as published by the Free Software Foundation; either version
-+ *		2 of the License, or (at your option) any later version.
-+ *
-+ * Authors:	Alexey Kuznetsov, <[email protected]>
-+ *
-+ * Changes:	Alexander Atanasov, <[email protected]>
-+ *		Added dynamic depth,limit,divisor,hash_kind options.
-+ *		Added dst and src hashes.
-+ *
-+ * 		Alexander Clouter, <[email protected]>
-+ *		Ported ESFQ to Linux 2.6.
-+ *
-+ * 		Corey Hickey, <[email protected]>
-+ *		Maintenance of the Linux 2.6 port.
-+ *		Added fwmark hash (thanks to Robert Kurjata).
-+ *		Added usage of jhash.
-+ *		Added conntrack support.
-+ *		Added ctnatchg hash (thanks to Ben Pfountz).
-+ */
-+
-+#include <linux/module.h>
-+#include <asm/uaccess.h>
-+#include <asm/system.h>
-+#include <linux/bitops.h>
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+#include <linux/jiffies.h>
-+#include <linux/string.h>
-+#include <linux/mm.h>
-+#include <linux/socket.h>
-+#include <linux/sockios.h>
-+#include <linux/in.h>
-+#include <linux/errno.h>
-+#include <linux/interrupt.h>
-+#include <linux/if_ether.h>
-+#include <linux/inet.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/notifier.h>
-+#include <linux/init.h>
-+#include <net/ip.h>
-+#include <net/netlink.h>
-+#include <linux/ipv6.h>
-+#include <net/route.h>
-+#include <linux/skbuff.h>
-+#include <net/sock.h>
-+#include <net/pkt_sched.h>
-+#include <linux/jhash.h>
-+#ifdef CONFIG_NET_SCH_ESFQ_NFCT
-+#include <net/netfilter/nf_conntrack.h>
-+#endif
-+
-+/*	Stochastic Fairness Queuing algorithm.
-+	For more comments look at sch_sfq.c.
-+	The difference is that you can change limit, depth,
-+	hash table size and choose alternate hash types.
-+
-+	classic:	same as in sch_sfq.c
-+	dst:		destination IP address
-+	src:		source IP address
-+	fwmark:		netfilter mark value
-+	ctorigdst:	original destination IP address
-+	ctorigsrc:	original source IP address
-+	ctrepldst:	reply destination IP address
-+	ctreplsrc:	reply source IP
-+
-+*/
-+
-+#define ESFQ_HEAD 0
-+#define ESFQ_TAIL 1
-+
-+/* This type should contain at least SFQ_DEPTH*2 values */
-+typedef unsigned int esfq_index;
-+
-+struct esfq_head
-+{
-+	esfq_index	next;
-+	esfq_index	prev;
-+};
-+
-+struct esfq_sched_data
-+{
-+/* Parameters */
-+	int		perturb_period;
-+	unsigned	quantum;	/* Allotment per round: MUST BE >= MTU */
-+	int		limit;
-+	unsigned	depth;
-+	unsigned	hash_divisor;
-+	unsigned	hash_kind;
-+/* Variables */
-+	struct timer_list perturb_timer;
-+	int		perturbation;
-+	esfq_index	tail;		/* Index of current slot in round */
-+	esfq_index	max_depth;	/* Maximal depth */
-+
-+	esfq_index	*ht;			/* Hash table */
-+	esfq_index	*next;			/* Active slots link */
-+	short		*allot;			/* Current allotment per slot */
-+	unsigned short	*hash;			/* Hash value indexed by slots */
-+	struct sk_buff_head	*qs;		/* Slot queue */
-+	struct esfq_head	*dep;		/* Linked list of slots, indexed by depth */
-+};
-+
-+/* This contains the info we will hash. */
-+struct esfq_packet_info
-+{
-+	u32	proto;		/* protocol or port */
-+	u32	src;		/* source from packet header */
-+	u32	dst;		/* destination from packet header */
-+	u32	ctorigsrc;	/* original source from conntrack */
-+	u32	ctorigdst;	/* original destination from conntrack */
-+	u32	ctreplsrc;	/* reply source from conntrack */
-+	u32	ctrepldst;	/* reply destination from conntrack */
-+	u32	mark;		/* netfilter mark (fwmark) */
-+};
-+
-+static __inline__ unsigned esfq_jhash_1word(struct esfq_sched_data *q,u32 a)
-+{
-+	return jhash_1word(a, q->perturbation) & (q->hash_divisor-1);
-+}
-+
-+static __inline__ unsigned esfq_jhash_2words(struct esfq_sched_data *q, u32 a, u32 b)
-+{
-+	return jhash_2words(a, b, q->perturbation) & (q->hash_divisor-1);
-+}
-+
-+static __inline__ unsigned esfq_jhash_3words(struct esfq_sched_data *q, u32 a, u32 b, u32 c)
-+{
-+	return jhash_3words(a, b, c, q->perturbation) & (q->hash_divisor-1);
-+}
-+
-+static unsigned esfq_hash(struct esfq_sched_data *q, struct sk_buff *skb)
-+{
-+	struct esfq_packet_info info;
-+#ifdef CONFIG_NET_SCH_ESFQ_NFCT
-+	enum ip_conntrack_info ctinfo;
-+	struct nf_conn *ct = nf_ct_get(skb, &ctinfo);
-+#endif
-+
-+	switch (skb->protocol) {
-+	case __constant_htons(ETH_P_IP):
-+	{
-+		struct iphdr *iph = ip_hdr(skb);
-+		info.dst = iph->daddr;
-+		info.src = iph->saddr;
-+		if (!(iph->frag_off&htons(IP_MF|IP_OFFSET)) &&
-+		    (iph->protocol == IPPROTO_TCP ||
-+		     iph->protocol == IPPROTO_UDP ||
-+		     iph->protocol == IPPROTO_SCTP ||
-+		     iph->protocol == IPPROTO_DCCP ||
-+		     iph->protocol == IPPROTO_ESP))
-+			info.proto = *(((u32*)iph) + iph->ihl);
-+		else
-+			info.proto = iph->protocol;
-+		break;
-+	}
-+	case __constant_htons(ETH_P_IPV6):
-+	{
-+		struct ipv6hdr *iph = ipv6_hdr(skb);
-+		/* Hash ipv6 addresses into a u32. This isn't ideal,
-+		 * but the code is simple. */
-+		info.dst = jhash2(iph->daddr.s6_addr32, 4, q->perturbation);
-+		info.src = jhash2(iph->saddr.s6_addr32, 4, q->perturbation);
-+		if (iph->nexthdr == IPPROTO_TCP ||
-+		    iph->nexthdr == IPPROTO_UDP ||
-+		    iph->nexthdr == IPPROTO_SCTP ||
-+		    iph->nexthdr == IPPROTO_DCCP ||
-+		    iph->nexthdr == IPPROTO_ESP)
-+			info.proto = *(u32*)&iph[1];
-+		else
-+			info.proto = iph->nexthdr;
-+		break;
-+	}
-+	default:
-+		info.dst   = (u32)(unsigned long)skb_dst(skb);
-+		info.src   = (u32)(unsigned long)skb->sk;
-+		info.proto = skb->protocol;
-+	}
-+
-+	info.mark = skb->mark;
-+
-+#ifdef CONFIG_NET_SCH_ESFQ_NFCT
-+	/* defaults if there is no conntrack info */
-+	info.ctorigsrc = info.src;
-+	info.ctorigdst = info.dst;
-+	info.ctreplsrc = info.dst;
-+	info.ctrepldst = info.src;
-+	/* collect conntrack info */
-+	if (ct && ct != &nf_conntrack_untracked) {
-+		if (skb->protocol == __constant_htons(ETH_P_IP)) {
-+			info.ctorigsrc = ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip;
-+			info.ctorigdst = ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.u3.ip;
-+			info.ctreplsrc = ct->tuplehash[IP_CT_DIR_REPLY].tuple.src.u3.ip;
-+			info.ctrepldst = ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u3.ip;
-+		}
-+		else if (skb->protocol == __constant_htons(ETH_P_IPV6)) {
-+			/* Again, hash ipv6 addresses into a single u32. */
-+			info.ctorigsrc = jhash2(ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip6, 4, q->perturbation);
-+			info.ctorigdst = jhash2(ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.u3.ip6, 4, q->perturbation);
-+			info.ctreplsrc = jhash2(ct->tuplehash[IP_CT_DIR_REPLY].tuple.src.u3.ip6, 4, q->perturbation);
-+			info.ctrepldst = jhash2(ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u3.ip6, 4, q->perturbation);
-+		}
-+
-+	}
-+#endif
-+
-+	switch(q->hash_kind) {
-+	case TCA_SFQ_HASH_CLASSIC:
-+		return esfq_jhash_3words(q, info.dst, info.src, info.proto);
-+	case TCA_SFQ_HASH_DST:
-+		return esfq_jhash_1word(q, info.dst);
-+	case TCA_SFQ_HASH_SRC:
-+		return esfq_jhash_1word(q, info.src);
-+	case TCA_SFQ_HASH_FWMARK:
-+		return esfq_jhash_1word(q, info.mark);
-+#ifdef CONFIG_NET_SCH_ESFQ_NFCT
-+	case TCA_SFQ_HASH_CTORIGDST:
-+		return esfq_jhash_1word(q, info.ctorigdst);
-+	case TCA_SFQ_HASH_CTORIGSRC:
-+		return esfq_jhash_1word(q, info.ctorigsrc);
-+	case TCA_SFQ_HASH_CTREPLDST:
-+		return esfq_jhash_1word(q, info.ctrepldst);
-+	case TCA_SFQ_HASH_CTREPLSRC:
-+		return esfq_jhash_1word(q, info.ctreplsrc);
-+	case TCA_SFQ_HASH_CTNATCHG:
-+	{
-+		if (info.ctorigdst == info.ctreplsrc)
-+			return esfq_jhash_1word(q, info.ctorigsrc);
-+		return esfq_jhash_1word(q, info.ctreplsrc);
-+	}
-+#endif
-+	default:
-+		if (net_ratelimit())
-+			printk(KERN_WARNING "ESFQ: Unknown hash method. Falling back to classic.\n");
-+	}
-+	return esfq_jhash_3words(q, info.dst, info.src, info.proto);
-+}
-+
-+static inline void esfq_link(struct esfq_sched_data *q, esfq_index x)
-+{
-+	esfq_index p, n;
-+	int d = q->qs[x].qlen + q->depth;
-+
-+	p = d;
-+	n = q->dep[d].next;
-+	q->dep[x].next = n;
-+	q->dep[x].prev = p;
-+	q->dep[p].next = q->dep[n].prev = x;
-+}
-+
-+static inline void esfq_dec(struct esfq_sched_data *q, esfq_index x)
-+{
-+	esfq_index p, n;
-+
-+	n = q->dep[x].next;
-+	p = q->dep[x].prev;
-+	q->dep[p].next = n;
-+	q->dep[n].prev = p;
-+
-+	if (n == p && q->max_depth == q->qs[x].qlen + 1)
-+		q->max_depth--;
-+
-+	esfq_link(q, x);
-+}
-+
-+static inline void esfq_inc(struct esfq_sched_data *q, esfq_index x)
-+{
-+	esfq_index p, n;
-+	int d;
-+
-+	n = q->dep[x].next;
-+	p = q->dep[x].prev;
-+	q->dep[p].next = n;
-+	q->dep[n].prev = p;
-+	d = q->qs[x].qlen;
-+	if (q->max_depth < d)
-+		q->max_depth = d;
-+
-+	esfq_link(q, x);
-+}
-+
-+static unsigned int esfq_drop(struct Qdisc *sch)
-+{
-+	struct esfq_sched_data *q = qdisc_priv(sch);
-+	esfq_index d = q->max_depth;
-+	struct sk_buff *skb;
-+	unsigned int len;
-+
-+	/* Queue is full! Find the longest slot and
-+	   drop a packet from it */
-+
-+	if (d > 1) {
-+		esfq_index x = q->dep[d+q->depth].next;
-+		skb = q->qs[x].prev;
-+		len = skb->len;
-+		__skb_unlink(skb, &q->qs[x]);
-+		kfree_skb(skb);
-+		esfq_dec(q, x);
-+		sch->q.qlen--;
-+		sch->qstats.drops++;
-+		sch->qstats.backlog -= len;
-+		return len;
-+	}
-+
-+	if (d == 1) {
-+		/* It is difficult to believe, but ALL THE SLOTS HAVE LENGTH 1. */
-+		d = q->next[q->tail];
-+		q->next[q->tail] = q->next[d];
-+		q->allot[q->next[d]] += q->quantum;
-+		skb = q->qs[d].prev;
-+		len = skb->len;
-+		__skb_unlink(skb, &q->qs[d]);
-+		kfree_skb(skb);
-+		esfq_dec(q, d);
-+		sch->q.qlen--;
-+		q->ht[q->hash[d]] = q->depth;
-+		sch->qstats.drops++;
-+		sch->qstats.backlog -= len;
-+		return len;
-+	}
-+
-+	return 0;
-+}
-+
-+static void esfq_q_enqueue(struct sk_buff *skb, struct esfq_sched_data *q, unsigned int end)
-+{
-+	unsigned hash = esfq_hash(q, skb);
-+	unsigned depth = q->depth;
-+	esfq_index x;
-+
-+	x = q->ht[hash];
-+	if (x == depth) {
-+		q->ht[hash] = x = q->dep[depth].next;
-+		q->hash[x] = hash;
-+	}
-+
-+	if (end == ESFQ_TAIL)
-+		__skb_queue_tail(&q->qs[x], skb);
-+	else
-+		__skb_queue_head(&q->qs[x], skb);
-+
-+	esfq_inc(q, x);
-+	if (q->qs[x].qlen == 1) {		/* The flow is new */
-+		if (q->tail == depth) {	/* It is the first flow */
-+			q->tail = x;
-+			q->next[x] = x;
-+			q->allot[x] = q->quantum;
-+		} else {
-+			q->next[x] = q->next[q->tail];
-+			q->next[q->tail] = x;
-+			q->tail = x;
-+		}
-+	}
-+}
-+
-+static int esfq_enqueue(struct sk_buff *skb, struct Qdisc* sch)
-+{
-+	struct esfq_sched_data *q = qdisc_priv(sch);
-+	esfq_q_enqueue(skb, q, ESFQ_TAIL);
-+	sch->qstats.backlog += skb->len;
-+	if (++sch->q.qlen < q->limit-1) {
-+		sch->bstats.bytes += skb->len;
-+		sch->bstats.packets++;
-+		return 0;
-+	}
-+
-+	sch->qstats.drops++;
-+	esfq_drop(sch);
-+	return NET_XMIT_CN;
-+}
-+
-+static struct sk_buff *esfq_peek(struct Qdisc* sch)
-+{
-+	struct esfq_sched_data *q = qdisc_priv(sch);
-+	esfq_index a;
-+
-+	/* No active slots */
-+	if (q->tail == q->depth)
-+		return NULL;
-+
-+	a = q->next[q->tail];
-+	return skb_peek(&q->qs[a]);
-+}
-+
-+static struct sk_buff *esfq_q_dequeue(struct esfq_sched_data *q)
-+{
-+	struct sk_buff *skb;
-+	unsigned depth = q->depth;
-+	esfq_index a, old_a;
-+
-+	/* No active slots */
-+	if (q->tail == depth)
-+		return NULL;
-+
-+	a = old_a = q->next[q->tail];
-+
-+	/* Grab packet */
-+	skb = __skb_dequeue(&q->qs[a]);
-+	esfq_dec(q, a);
-+
-+	/* Is the slot empty? */
-+	if (q->qs[a].qlen == 0) {
-+		q->ht[q->hash[a]] = depth;
-+		a = q->next[a];
-+		if (a == old_a) {
-+			q->tail = depth;
-+			return skb;
-+		}
-+		q->next[q->tail] = a;
-+		q->allot[a] += q->quantum;
-+	} else if ((q->allot[a] -= skb->len) <= 0) {
-+		q->tail = a;
-+		a = q->next[a];
-+		q->allot[a] += q->quantum;
-+	}
-+
-+	return skb;
-+}
-+
-+static struct sk_buff *esfq_dequeue(struct Qdisc* sch)
-+{
-+	struct esfq_sched_data *q = qdisc_priv(sch);
-+	struct sk_buff *skb;
-+
-+	skb = esfq_q_dequeue(q);
-+	if (skb == NULL)
-+		return NULL;
-+	sch->q.qlen--;
-+	sch->qstats.backlog -= skb->len;
-+	return skb;
-+}
-+
-+static void esfq_q_destroy(struct esfq_sched_data *q)
-+{
-+	del_timer(&q->perturb_timer);
-+	if(q->ht)
-+		kfree(q->ht);
-+	if(q->dep)
-+		kfree(q->dep);
-+	if(q->next)
-+		kfree(q->next);
-+	if(q->allot)
-+		kfree(q->allot);
-+	if(q->hash)
-+		kfree(q->hash);
-+	if(q->qs)
-+		kfree(q->qs);
-+}
-+
-+static void esfq_destroy(struct Qdisc *sch)
-+{
-+	struct esfq_sched_data *q = qdisc_priv(sch);
-+	esfq_q_destroy(q);
-+}
-+
-+
-+static void esfq_reset(struct Qdisc* sch)
-+{
-+	struct sk_buff *skb;
-+
-+	while ((skb = esfq_dequeue(sch)) != NULL)
-+		kfree_skb(skb);
-+}
-+
-+static void esfq_perturbation(unsigned long arg)
-+{
-+	struct Qdisc *sch = (struct Qdisc*)arg;
-+	struct esfq_sched_data *q = qdisc_priv(sch);
-+
-+	q->perturbation = net_random()&0x1F;
-+
-+	if (q->perturb_period) {
-+		q->perturb_timer.expires = jiffies + q->perturb_period;
-+		add_timer(&q->perturb_timer);
-+	}
-+}
-+
-+static unsigned int esfq_check_hash(unsigned int kind)
-+{
-+	switch (kind) {
-+	case TCA_SFQ_HASH_CTORIGDST:
-+	case TCA_SFQ_HASH_CTORIGSRC:
-+	case TCA_SFQ_HASH_CTREPLDST:
-+	case TCA_SFQ_HASH_CTREPLSRC:
-+	case TCA_SFQ_HASH_CTNATCHG:
-+#ifndef CONFIG_NET_SCH_ESFQ_NFCT
-+	{
-+		if (net_ratelimit())
-+			printk(KERN_WARNING "ESFQ: Conntrack hash types disabled in kernel config. Falling back to classic.\n");
-+		return TCA_SFQ_HASH_CLASSIC;
-+	}
-+#endif
-+	case TCA_SFQ_HASH_CLASSIC:
-+	case TCA_SFQ_HASH_DST:
-+	case TCA_SFQ_HASH_SRC:
-+	case TCA_SFQ_HASH_FWMARK:
-+		return kind;
-+	default:
-+	{
-+		if (net_ratelimit())
-+			printk(KERN_WARNING "ESFQ: Unknown hash type. Falling back to classic.\n");
-+		return TCA_SFQ_HASH_CLASSIC;
-+	}
-+	}
-+}
-+
-+static int esfq_q_init(struct esfq_sched_data *q, struct nlattr *opt)
-+{
-+	struct tc_esfq_qopt *ctl = nla_data(opt);
-+	esfq_index p = ~0U/2;
-+	int i;
-+
-+	if (opt && opt->nla_len < nla_attr_size(sizeof(*ctl)))
-+		return -EINVAL;
-+
-+	q->perturbation = 0;
-+	q->hash_kind = TCA_SFQ_HASH_CLASSIC;
-+	q->max_depth = 0;
-+	if (opt == NULL) {
-+		q->perturb_period = 0;
-+		q->hash_divisor = 1024;
-+		q->tail = q->limit = q->depth = 128;
-+
-+	} else {
-+		struct tc_esfq_qopt *ctl = nla_data(opt);
-+		if (ctl->quantum)
-+			q->quantum = ctl->quantum;
-+		q->perturb_period = ctl->perturb_period*HZ;
-+		q->hash_divisor = ctl->divisor ? : 1024;
-+		q->tail = q->limit = q->depth = ctl->flows ? : 128;
-+
-+		if ( q->depth > p - 1 )
-+			return -EINVAL;
-+
-+		if (ctl->limit)
-+			q->limit = min_t(u32, ctl->limit, q->depth);
-+
-+		if (ctl->hash_kind) {
-+			q->hash_kind = esfq_check_hash(ctl->hash_kind);
-+		}
-+	}
-+
-+	q->ht = kmalloc(q->hash_divisor*sizeof(esfq_index), GFP_KERNEL);
-+	if (!q->ht)
-+		goto err_case;
-+	q->dep = kmalloc((1+q->depth*2)*sizeof(struct esfq_head), GFP_KERNEL);
-+	if (!q->dep)
-+		goto err_case;
-+	q->next = kmalloc(q->depth*sizeof(esfq_index), GFP_KERNEL);
-+	if (!q->next)
-+		goto err_case;
-+	q->allot = kmalloc(q->depth*sizeof(short), GFP_KERNEL);
-+	if (!q->allot)
-+		goto err_case;
-+	q->hash = kmalloc(q->depth*sizeof(unsigned short), GFP_KERNEL);
-+	if (!q->hash)
-+		goto err_case;
-+	q->qs = kmalloc(q->depth*sizeof(struct sk_buff_head), GFP_KERNEL);
-+	if (!q->qs)
-+		goto err_case;
-+
-+	for (i=0; i< q->hash_divisor; i++)
-+		q->ht[i] = q->depth;
-+	for (i=0; i<q->depth; i++) {
-+		skb_queue_head_init(&q->qs[i]);
-+		q->dep[i+q->depth].next = i+q->depth;
-+		q->dep[i+q->depth].prev = i+q->depth;
-+	}
-+
-+	for (i=0; i<q->depth; i++)
-+		esfq_link(q, i);
-+	return 0;
-+err_case:
-+	esfq_q_destroy(q);
-+	return -ENOBUFS;
-+}
-+
-+static int esfq_init(struct Qdisc *sch, struct nlattr *opt)
-+{
-+	struct esfq_sched_data *q = qdisc_priv(sch);
-+	int err;
-+
-+	q->quantum = psched_mtu(qdisc_dev(sch)); /* default */
-+	if ((err = esfq_q_init(q, opt)))
-+		return err;
-+
-+	init_timer(&q->perturb_timer);
-+	q->perturb_timer.data = (unsigned long)sch;
-+	q->perturb_timer.function = esfq_perturbation;
-+	if (q->perturb_period) {
-+		q->perturb_timer.expires = jiffies + q->perturb_period;
-+		add_timer(&q->perturb_timer);
-+	}
-+
-+	return 0;
-+}
-+
-+static int esfq_change(struct Qdisc *sch, struct nlattr *opt)
-+{
-+	struct esfq_sched_data *q = qdisc_priv(sch);
-+	struct esfq_sched_data new;
-+	struct sk_buff *skb;
-+	int err;
-+
-+	/* set up new queue */
-+	memset(&new, 0, sizeof(struct esfq_sched_data));
-+	new.quantum = psched_mtu(qdisc_dev(sch)); /* default */
-+	if ((err = esfq_q_init(&new, opt)))
-+		return err;
-+
-+	/* copy all packets from the old queue to the new queue */
-+	sch_tree_lock(sch);
-+	while ((skb = esfq_q_dequeue(q)) != NULL)
-+		esfq_q_enqueue(skb, &new, ESFQ_TAIL);
-+
-+	/* clean up the old queue */
-+	esfq_q_destroy(q);
-+
-+	/* copy elements of the new queue into the old queue */
-+	q->perturb_period = new.perturb_period;
-+	q->quantum        = new.quantum;
-+	q->limit          = new.limit;
-+	q->depth          = new.depth;
-+	q->hash_divisor   = new.hash_divisor;
-+	q->hash_kind      = new.hash_kind;
-+	q->tail           = new.tail;
-+	q->max_depth      = new.max_depth;
-+	q->ht    = new.ht;
-+	q->dep   = new.dep;
-+	q->next  = new.next;
-+	q->allot = new.allot;
-+	q->hash  = new.hash;
-+	q->qs    = new.qs;
-+
-+	/* finish up */
-+	if (q->perturb_period) {
-+		q->perturb_timer.expires = jiffies + q->perturb_period;
-+		add_timer(&q->perturb_timer);
-+	} else {
-+		q->perturbation = 0;
-+	}
-+	sch_tree_unlock(sch);
-+	return 0;
-+}
-+
-+static int esfq_dump(struct Qdisc *sch, struct sk_buff *skb)
-+{
-+	struct esfq_sched_data *q = qdisc_priv(sch);
-+	unsigned char *b = skb_tail_pointer(skb);
-+	struct tc_esfq_qopt opt;
-+
-+	opt.quantum = q->quantum;
-+	opt.perturb_period = q->perturb_period/HZ;
-+
-+	opt.limit = q->limit;
-+	opt.divisor = q->hash_divisor;
-+	opt.flows = q->depth;
-+	opt.hash_kind = q->hash_kind;
-+
-+	NLA_PUT(skb, TCA_OPTIONS, sizeof(opt), &opt);
-+
-+	return skb->len;
-+
-+nla_put_failure:
-+	nlmsg_trim(skb, b);
-+	return -1;
-+}
-+
-+static struct Qdisc_ops esfq_qdisc_ops =
-+{
-+	.next		=	NULL,
-+	.cl_ops		=	NULL,
-+	.id		=	"esfq",
-+	.priv_size	=	sizeof(struct esfq_sched_data),
-+	.enqueue	=	esfq_enqueue,
-+	.dequeue	=	esfq_dequeue,
-+	.peek		=	esfq_peek,
-+	.drop		=	esfq_drop,
-+	.init		=	esfq_init,
-+	.reset		=	esfq_reset,
-+	.destroy	=	esfq_destroy,
-+	.change		=	esfq_change,
-+	.dump		=	esfq_dump,
-+	.owner		=	THIS_MODULE,
-+};
-+
-+static int __init esfq_module_init(void)
-+{
-+	return register_qdisc(&esfq_qdisc_ops);
-+}
-+static void __exit esfq_module_exit(void)
-+{
-+	unregister_qdisc(&esfq_qdisc_ops);
-+}
-+module_init(esfq_module_init)
-+module_exit(esfq_module_exit)
-+MODULE_LICENSE("GPL");

target/linux/generic/patches-2.6.34/201-jhash3.patch

@@ -1,227 +0,0 @@
---- a/include/linux/jhash.h
-+++ b/include/linux/jhash.h
-@@ -3,80 +3,95 @@
- 
- /* jhash.h: Jenkins hash support.
-  *
-- * Copyright (C) 1996 Bob Jenkins ([email protected])
-+ * Copyright (C) 2006. Bob Jenkins ([email protected])
-  *
-  * http://burtleburtle.net/bob/hash/
-  *
-  * These are the credits from Bob's sources:
-  *
-- * lookup2.c, by Bob Jenkins, December 1996, Public Domain.
-- * hash(), hash2(), hash3, and mix() are externally useful functions.
-- * Routines to test the hash are included if SELF_TEST is defined.
-- * You can use this free for any purpose.  It has no warranty.
-+ * lookup3.c, by Bob Jenkins, May 2006, Public Domain.
-  *
-- * Copyright (C) 2003 David S. Miller ([email protected])
-+ * These are functions for producing 32-bit hashes for hash table lookup.
-+ * hashword(), hashlittle(), hashlittle2(), hashbig(), mix(), and final() 
-+ * are externally useful functions.  Routines to test the hash are included 
-+ * if SELF_TEST is defined.  You can use this free for any purpose.  It's in
-+ * the public domain.  It has no warranty.
-+ *
-+ * Copyright (C) 2009 Jozsef Kadlecsik ([email protected])
-  *
-  * I've modified Bob's hash to be useful in the Linux kernel, and
-- * any bugs present are surely my fault.  -DaveM
-+ * any bugs present are my fault.  Jozsef
-  */
- 
--/* NOTE: Arguments are modified. */
--#define __jhash_mix(a, b, c) \
-+#define __rot(x,k) (((x)<<(k)) | ((x)>>(32-(k))))
-+
-+/* __jhash_mix - mix 3 32-bit values reversibly. */
-+#define __jhash_mix(a,b,c) \
-+{ \
-+  a -= c;  a ^= __rot(c, 4);  c += b; \
-+  b -= a;  b ^= __rot(a, 6);  a += c; \
-+  c -= b;  c ^= __rot(b, 8);  b += a; \
-+  a -= c;  a ^= __rot(c,16);  c += b; \
-+  b -= a;  b ^= __rot(a,19);  a += c; \
-+  c -= b;  c ^= __rot(b, 4);  b += a; \
-+}
-+
-+/* __jhash_final - final mixing of 3 32-bit values (a,b,c) into c */
-+#define __jhash_final(a,b,c) \
- { \
--  a -= b; a -= c; a ^= (c>>13); \
--  b -= c; b -= a; b ^= (a<<8); \
--  c -= a; c -= b; c ^= (b>>13); \
--  a -= b; a -= c; a ^= (c>>12);  \
--  b -= c; b -= a; b ^= (a<<16); \
--  c -= a; c -= b; c ^= (b>>5); \
--  a -= b; a -= c; a ^= (c>>3);  \
--  b -= c; b -= a; b ^= (a<<10); \
--  c -= a; c -= b; c ^= (b>>15); \
-+  c ^= b; c -= __rot(b,14); \
-+  a ^= c; a -= __rot(c,11); \
-+  b ^= a; b -= __rot(a,25); \
-+  c ^= b; c -= __rot(b,16); \
-+  a ^= c; a -= __rot(c,4);  \
-+  b ^= a; b -= __rot(a,14); \
-+  c ^= b; c -= __rot(b,24); \
- }
- 
--/* The golden ration: an arbitrary value */
--#define JHASH_GOLDEN_RATIO	0x9e3779b9
-+/* An arbitrary initial parameter */
-+#define JHASH_GOLDEN_RATIO	0xdeadbeef
- 
- /* The most generic version, hashes an arbitrary sequence
-  * of bytes.  No alignment or length assumptions are made about
-- * the input key.
-+ * the input key. The result depends on endianness.
-  */
- static inline u32 jhash(const void *key, u32 length, u32 initval)
- {
--	u32 a, b, c, len;
-+	u32 a,b,c;
- 	const u8 *k = key;
- 
--	len = length;
--	a = b = JHASH_GOLDEN_RATIO;
--	c = initval;
--
--	while (len >= 12) {
--		a += (k[0] +((u32)k[1]<<8) +((u32)k[2]<<16) +((u32)k[3]<<24));
--		b += (k[4] +((u32)k[5]<<8) +((u32)k[6]<<16) +((u32)k[7]<<24));
--		c += (k[8] +((u32)k[9]<<8) +((u32)k[10]<<16)+((u32)k[11]<<24));
--
--		__jhash_mix(a,b,c);
-+	/* Set up the internal state */
-+	a = b = c = JHASH_GOLDEN_RATIO + length + initval;
- 
-+	/* all but the last block: affect some 32 bits of (a,b,c) */
-+	while (length > 12) {
-+    		a += (k[0] + ((u32)k[1]<<8) + ((u32)k[2]<<16) + ((u32)k[3]<<24));
-+		b += (k[4] + ((u32)k[5]<<8) + ((u32)k[6]<<16) + ((u32)k[7]<<24));
-+		c += (k[8] + ((u32)k[9]<<8) + ((u32)k[10]<<16) + ((u32)k[11]<<24));
-+		__jhash_mix(a, b, c);
-+		length -= 12;
- 		k += 12;
--		len -= 12;
- 	}
- 
--	c += length;
--	switch (len) {
--	case 11: c += ((u32)k[10]<<24);
--	case 10: c += ((u32)k[9]<<16);
--	case 9 : c += ((u32)k[8]<<8);
--	case 8 : b += ((u32)k[7]<<24);
--	case 7 : b += ((u32)k[6]<<16);
--	case 6 : b += ((u32)k[5]<<8);
-+	/* last block: affect all 32 bits of (c) */
-+	/* all the case statements fall through */
-+	switch (length) {
-+	case 12: c += (u32)k[11]<<24;
-+	case 11: c += (u32)k[10]<<16;
-+	case 10: c += (u32)k[9]<<8;
-+	case 9 : c += k[8];
-+	case 8 : b += (u32)k[7]<<24;
-+	case 7 : b += (u32)k[6]<<16;
-+	case 6 : b += (u32)k[5]<<8;
- 	case 5 : b += k[4];
--	case 4 : a += ((u32)k[3]<<24);
--	case 3 : a += ((u32)k[2]<<16);
--	case 2 : a += ((u32)k[1]<<8);
-+	case 4 : a += (u32)k[3]<<24;
-+	case 3 : a += (u32)k[2]<<16;
-+	case 2 : a += (u32)k[1]<<8;
- 	case 1 : a += k[0];
--	};
--
--	__jhash_mix(a,b,c);
-+		__jhash_final(a, b, c);
-+	case 0 :
-+		break;
-+	}
- 
- 	return c;
- }
-@@ -86,58 +101,57 @@ static inline u32 jhash(const void *key,
-  */
- static inline u32 jhash2(const u32 *k, u32 length, u32 initval)
- {
--	u32 a, b, c, len;
-+	u32 a, b, c;
- 
--	a = b = JHASH_GOLDEN_RATIO;
--	c = initval;
--	len = length;
-+	/* Set up the internal state */
-+	a = b = c = JHASH_GOLDEN_RATIO + (length<<2) + initval;
- 
--	while (len >= 3) {
-+	/* handle most of the key */
-+	while (length > 3) {
- 		a += k[0];
- 		b += k[1];
- 		c += k[2];
- 		__jhash_mix(a, b, c);
--		k += 3; len -= 3;
-+		length -= 3;
-+		k += 3;
- 	}
- 
--	c += length * 4;
--
--	switch (len) {
--	case 2 : b += k[1];
--	case 1 : a += k[0];
--	};
--
--	__jhash_mix(a,b,c);
-+	/* handle the last 3 u32's */
-+	/* all the case statements fall through */ 
-+	switch (length) {
-+	case 3: c += k[2];
-+	case 2: b += k[1];
-+	case 1: a += k[0];
-+		__jhash_final(a, b, c);
-+	case 0:     /* case 0: nothing left to add */
-+		break;
-+	}
- 
- 	return c;
- }
- 
--
- /* A special ultra-optimized versions that knows they are hashing exactly
-  * 3, 2 or 1 word(s).
-- *
-- * NOTE: In partilar the "c += length; __jhash_mix(a,b,c);" normally
-- *       done at the end is not done here.
-  */
- static inline u32 jhash_3words(u32 a, u32 b, u32 c, u32 initval)
- {
--	a += JHASH_GOLDEN_RATIO;
--	b += JHASH_GOLDEN_RATIO;
--	c += initval;
-+	a += JHASH_GOLDEN_RATIO + initval;
-+	b += JHASH_GOLDEN_RATIO + initval;
-+	c += JHASH_GOLDEN_RATIO + initval;
- 
--	__jhash_mix(a, b, c);
-+	__jhash_final(a, b, c);
- 
- 	return c;
- }
- 
- static inline u32 jhash_2words(u32 a, u32 b, u32 initval)
- {
--	return jhash_3words(a, b, 0, initval);
-+	return jhash_3words(0, a, b, initval);
- }
- 
- static inline u32 jhash_1word(u32 a, u32 initval)
- {
--	return jhash_3words(a, 0, 0, initval);
-+	return jhash_3words(0, 0, a, initval);
- }
- 
- #endif /* _LINUX_JHASH_H */