kernel: bump 5.10 to 5.10.150

Manually rebased:
  bcm53xx/patches-5.10/180-usb-xhci-add-support-for-performing-fake-doorbell.patch

All patches automatically rebased.

Signed-off-by: John Audia <[email protected]>
[Move gro_skip in 680-NET-skip-GRO-for-foreign-MAC-addresses.patch to old position]
Signed-off-by: Hauke Mehrtens <[email protected]>

include/kernel-5.10

@@ -1,2 +1,2 @@
-LINUX_VERSION-5.10 = .149
-LINUX_KERNEL_HASH-5.10.149 = 0f6134c537563b9cd0533924e3ce06f577cf874e7a00cf3d8e8b31222ac065d3
+LINUX_VERSION-5.10 = .150
+LINUX_KERNEL_HASH-5.10.150 = 5813bc3c5d70b0beb26de4b627baa33554d01bed8c842a2e46072cf03d74dee1

target/linux/apm821xx/patches-5.10/802-usb-xhci-force-msi-renesas-xhci.patch

@@ -43,7 +43,7 @@ produce a noisy warning.
  		hcd->msi_enabled = 1;
 --- a/drivers/usb/host/xhci.h
 +++ b/drivers/usb/host/xhci.h
-@@ -1895,6 +1895,7 @@ struct xhci_hcd {
+@@ -1896,6 +1896,7 @@ struct xhci_hcd {
  	struct xhci_hub		usb2_rhub;
  	struct xhci_hub		usb3_rhub;
  	/* support xHCI 1.0 spec USB2 hardware LPM */

target/linux/apm821xx/patches-5.10/900-powerpc-bootwrapper-force-gzip-as-mkimage-s-compress.patch

@@ -18,7 +18,7 @@ Signed-off-by: Christian Lamparter <[email protected]>
 
 --- a/arch/powerpc/boot/Makefile
 +++ b/arch/powerpc/boot/Makefile
-@@ -250,7 +250,7 @@ compressor-$(CONFIG_KERNEL_LZO) := lzo
+@@ -251,7 +251,7 @@ compressor-$(CONFIG_KERNEL_LZO) := lzo
  
  # args (to if_changed): 1 = (this rule), 2 = platform, 3 = dts 4=dtb 5=initrd
  quiet_cmd_wrap	= WRAP    $@

target/linux/ath79/patches-5.10/401-mtd-nor-support-mtd-name-from-device-tree.patch

@@ -34,7 +34,7 @@ Signed-off-by: Abhimanyu Vishwakarma <[email protected]>
  	mtd->type = MTD_NORFLASH;
 --- a/drivers/mtd/mtdcore.c
 +++ b/drivers/mtd/mtdcore.c
-@@ -851,6 +851,17 @@ out_error:
+@@ -843,6 +843,17 @@ out_error:
   */
  static void mtd_set_dev_defaults(struct mtd_info *mtd)
  {

target/linux/ath79/patches-5.10/404-mtd-cybertan-trx-parser.patch

@@ -25,7 +25,7 @@ Submitted-by: Christian Lamparter <[email protected]>
 +obj-$(CONFIG_MTD_PARSER_CYBERTAN)	+= parser_cybertan.o
  obj-$(CONFIG_MTD_PARSER_IMAGETAG)	+= parser_imagetag.o
  obj-$(CONFIG_MTD_AFS_PARTS)		+= afs.o
- obj-$(CONFIG_MTD_PARSER_TRX)		+= parser_trx.o
+ obj-$(CONFIG_MTD_PARSER_TPLINK_SAFELOADER)	+= tplink_safeloader.o
 --- a/drivers/mtd/parsers/Kconfig
 +++ b/drivers/mtd/parsers/Kconfig
 @@ -102,6 +102,14 @@ config MTD_OF_PARTS_LINKSYS_NS

target/linux/bcm53xx/patches-5.10/180-usb-xhci-add-support-for-performing-fake-doorbell.patch

@@ -127,10 +127,10 @@ it on BCM4708 family.
  /*
 --- a/drivers/usb/host/xhci.h
 +++ b/drivers/usb/host/xhci.h
-@@ -1888,6 +1888,7 @@ struct xhci_hcd {
- #define XHCI_SG_TRB_CACHE_SIZE_QUIRK	BIT_ULL(39)
+@@ -1889,6 +1889,7 @@ struct xhci_hcd {
  #define XHCI_NO_SOFT_RETRY	BIT_ULL(40)
  #define XHCI_EP_CTX_BROKEN_DCS	BIT_ULL(42)
+ #define XHCI_SUSPEND_RESUME_CLKS	BIT_ULL(43)
 +#define XHCI_FAKE_DOORBELL	BIT_ULL(44)
  
  	unsigned int		num_active_eps;

target/linux/generic/backport-5.10/782-v5.11-net-usb-r8153_ecm-support-ECM-mode-for-RTL8153.patch

@@ -89,7 +89,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  struct tally_counter {
  	__le64	tx_packets;
  	__le64	rx_packets;
-@@ -6602,7 +6579,7 @@ static int rtl_fw_init(struct r8152 *tp)
+@@ -6604,7 +6581,7 @@ static int rtl_fw_init(struct r8152 *tp)
  	return 0;
  }
  
@@ -98,7 +98,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  {
  	struct usb_device *udev = interface_to_usbdev(intf);
  	u32 ocp_data = 0;
-@@ -6660,12 +6637,13 @@ static u8 rtl_get_version(struct usb_int
+@@ -6662,12 +6639,13 @@ static u8 rtl_get_version(struct usb_int
  
  	return version;
  }

target/linux/generic/backport-5.10/783-v5.12-net-usb-r8152-use-new-tasklet-API.patch

@@ -16,7 +16,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
 
 --- a/drivers/net/usb/r8152.c
 +++ b/drivers/net/usb/r8152.c
-@@ -2393,11 +2393,9 @@ static void tx_bottom(struct r8152 *tp)
+@@ -2395,11 +2395,9 @@ static void tx_bottom(struct r8152 *tp)
  	} while (res == 0);
  }
  
@@ -30,7 +30,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  
  	if (test_bit(RTL8152_UNPLUG, &tp->flags))
  		return;
-@@ -6695,7 +6693,7 @@ static int rtl8152_probe(struct usb_inte
+@@ -6697,7 +6695,7 @@ static int rtl8152_probe(struct usb_inte
  	mutex_init(&tp->control);
  	INIT_DELAYED_WORK(&tp->schedule, rtl_work_func_t);
  	INIT_DELAYED_WORK(&tp->hw_phy_work, rtl_hw_phy_work_func_t);

target/linux/generic/backport-5.10/784-v5.12-r8152-replace-several-functions-about-phy-patch-requ.patch

@@ -25,7 +25,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
 
 --- a/drivers/net/usb/r8152.c
 +++ b/drivers/net/usb/r8152.c
-@@ -3443,59 +3443,76 @@ static void rtl_clear_bp(struct r8152 *t
+@@ -3445,59 +3445,76 @@ static void rtl_clear_bp(struct r8152 *t
  	ocp_write_word(tp, type, PLA_BP_BA, 0);
  }
  
@@ -127,7 +127,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  
  	ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, tp->ocp_base);
  
-@@ -3980,7 +3997,7 @@ static void rtl8152_fw_mac_apply(struct
+@@ -3982,7 +3999,7 @@ static void rtl8152_fw_mac_apply(struct
  	dev_dbg(&tp->intf->dev, "successfully applied %s\n", mac->info);
  }
  
@@ -136,7 +136,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  {
  	struct rtl_fw *rtl_fw = &tp->rtl_fw;
  	const struct firmware *fw;
-@@ -4011,12 +4028,11 @@ static void rtl8152_apply_firmware(struc
+@@ -4013,12 +4030,11 @@ static void rtl8152_apply_firmware(struc
  		case RTL_FW_PHY_START:
  			key = (struct fw_phy_patch_key *)block;
  			key_addr = __le16_to_cpu(key->key_reg);
@@ -151,7 +151,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  			break;
  		case RTL_FW_PHY_NC:
  			rtl8152_fw_phy_nc_apply(tp, (struct fw_phy_nc *)block);
-@@ -4221,7 +4237,7 @@ static void rtl8152_disable(struct r8152
+@@ -4223,7 +4239,7 @@ static void rtl8152_disable(struct r8152
  
  static void r8152b_hw_phy_cfg(struct r8152 *tp)
  {
@@ -160,7 +160,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  	rtl_eee_enable(tp, tp->eee_en);
  	r8152_aldps_en(tp, true);
  	r8152b_enable_fc(tp);
-@@ -4503,7 +4519,7 @@ static void r8153_hw_phy_cfg(struct r815
+@@ -4505,7 +4521,7 @@ static void r8153_hw_phy_cfg(struct r815
  	/* disable EEE before updating the PHY parameters */
  	rtl_eee_enable(tp, false);
  
@@ -169,7 +169,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  
  	if (tp->version == RTL_VER_03) {
  		data = ocp_reg_read(tp, OCP_EEE_CFG);
-@@ -4577,7 +4593,7 @@ static void r8153b_hw_phy_cfg(struct r81
+@@ -4579,7 +4595,7 @@ static void r8153b_hw_phy_cfg(struct r81
  	/* disable EEE before updating the PHY parameters */
  	rtl_eee_enable(tp, false);
  
@@ -178,7 +178,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  
  	r8153b_green_en(tp, test_bit(GREEN_ETHERNET, &tp->flags));
  
-@@ -4618,7 +4634,7 @@ static void r8153b_hw_phy_cfg(struct r81
+@@ -4620,7 +4636,7 @@ static void r8153b_hw_phy_cfg(struct r81
  	ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data);
  
  	/* Advnace EEE */
@@ -187,7 +187,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  		data = ocp_reg_read(tp, OCP_POWER_CFG);
  		data |= EEE_CLKDIV_EN;
  		ocp_reg_write(tp, OCP_POWER_CFG, data);
-@@ -4635,7 +4651,7 @@ static void r8153b_hw_phy_cfg(struct r81
+@@ -4637,7 +4653,7 @@ static void r8153b_hw_phy_cfg(struct r81
  		ocp_reg_write(tp, OCP_SYSCLK_CFG, clk_div_expo(5));
  		tp->ups_info._250m_ckdiv = true;
  

target/linux/generic/backport-5.10/785-v5.12-r8152-adjust-the-flow-of-power-cut-for-RTL8153B.patch

@@ -31,7 +31,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  static int rtl8152_set_mac_address(struct net_device *netdev, void *p)
  {
  	struct r8152 *tp = netdev_priv(netdev);
-@@ -3182,8 +3186,6 @@ static void r8153b_ups_en(struct r8152 *
+@@ -3184,8 +3188,6 @@ static void r8153b_ups_en(struct r8152 *
  		ocp_data |= BIT(0);
  		ocp_write_byte(tp, MCU_TYPE_USB, 0xcfff, ocp_data);
  	} else {
@@ -40,7 +40,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  		ocp_data &= ~(UPS_EN | USP_PREWAKE);
  		ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
  
-@@ -3191,31 +3193,20 @@ static void r8153b_ups_en(struct r8152 *
+@@ -3193,31 +3195,20 @@ static void r8153b_ups_en(struct r8152 *
  		ocp_data &= ~BIT(0);
  		ocp_write_byte(tp, MCU_TYPE_USB, 0xcfff, ocp_data);
  
@@ -83,7 +83,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  		}
  	}
  }
-@@ -4587,13 +4578,37 @@ static void r8153b_hw_phy_cfg(struct r81
+@@ -4589,13 +4580,37 @@ static void r8153b_hw_phy_cfg(struct r81
  	u32 ocp_data;
  	u16 data;
  
@@ -122,7 +122,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  
  	r8153b_green_en(tp, test_bit(GREEN_ETHERNET, &tp->flags));
  
-@@ -5522,9 +5537,6 @@ static void r8153b_init(struct r8152 *tp
+@@ -5524,9 +5539,6 @@ static void r8153b_init(struct r8152 *tp
  	/* MSC timer = 0xfff * 8ms = 32760 ms */
  	ocp_write_word(tp, MCU_TYPE_USB, USB_MSC_TIMER, 0x0fff);
  

target/linux/generic/backport-5.10/786-v5.12-r8152-enable-U1-U2-for-USB_SPEED_SUPER.patch

@@ -16,7 +16,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
 
 --- a/drivers/net/usb/r8152.c
 +++ b/drivers/net/usb/r8152.c
-@@ -3335,7 +3335,7 @@ static void rtl8153b_runtime_enable(stru
+@@ -3337,7 +3337,7 @@ static void rtl8153b_runtime_enable(stru
  		r8153b_ups_en(tp, false);
  		r8153_queue_wake(tp, false);
  		rtl_runtime_suspend_enable(tp, false);
@@ -25,7 +25,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  			r8153b_u1u2en(tp, true);
  	}
  }
-@@ -5028,7 +5028,7 @@ static void rtl8153b_up(struct r8152 *tp
+@@ -5030,7 +5030,7 @@ static void rtl8153b_up(struct r8152 *tp
  
  	r8153_aldps_en(tp, true);
  
@@ -34,7 +34,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  		r8153b_u1u2en(tp, true);
  }
  
-@@ -5550,8 +5550,9 @@ static void r8153b_init(struct r8152 *tp
+@@ -5552,8 +5552,9 @@ static void r8153b_init(struct r8152 *tp
  	ocp_data |= POLL_LINK_CHG;
  	ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data);
  

target/linux/generic/backport-5.10/787-v5.12-r8152-check-if-the-pointer-of-the-function-exists.patch

@@ -15,7 +15,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
 
 --- a/drivers/net/usb/r8152.c
 +++ b/drivers/net/usb/r8152.c
-@@ -5735,6 +5735,9 @@ static int rtl8152_runtime_suspend(struc
+@@ -5737,6 +5737,9 @@ static int rtl8152_runtime_suspend(struc
  	struct net_device *netdev = tp->netdev;
  	int ret = 0;
  
@@ -25,7 +25,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  	set_bit(SELECTIVE_SUSPEND, &tp->flags);
  	smp_mb__after_atomic();
  
-@@ -6134,6 +6137,11 @@ rtl_ethtool_get_eee(struct net_device *n
+@@ -6136,6 +6139,11 @@ rtl_ethtool_get_eee(struct net_device *n
  	struct r8152 *tp = netdev_priv(net);
  	int ret;
  
@@ -37,7 +37,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  	ret = usb_autopm_get_interface(tp->intf);
  	if (ret < 0)
  		goto out;
-@@ -6156,6 +6164,11 @@ rtl_ethtool_set_eee(struct net_device *n
+@@ -6158,6 +6166,11 @@ rtl_ethtool_set_eee(struct net_device *n
  	struct r8152 *tp = netdev_priv(net);
  	int ret;
  

target/linux/generic/backport-5.10/788-v5.12-r8152-replace-netif_err-with-dev_err.patch

@@ -16,7 +16,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
 
 --- a/drivers/net/usb/r8152.c
 +++ b/drivers/net/usb/r8152.c
-@@ -6571,7 +6571,7 @@ static int rtl_ops_init(struct r8152 *tp
+@@ -6573,7 +6573,7 @@ static int rtl_ops_init(struct r8152 *tp
  
  	default:
  		ret = -ENODEV;
@@ -25,7 +25,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  		break;
  	}
  
-@@ -6828,7 +6828,7 @@ static int rtl8152_probe(struct usb_inte
+@@ -6830,7 +6830,7 @@ static int rtl8152_probe(struct usb_inte
  
  	ret = register_netdev(netdev);
  	if (ret != 0) {

target/linux/generic/backport-5.10/789-v5.12-r8152-spilt-rtl_set_eee_plus-and-r8153b_green_en.patch

@@ -15,7 +15,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
 
 --- a/drivers/net/usb/r8152.c
 +++ b/drivers/net/usb/r8152.c
-@@ -2632,21 +2632,24 @@ static inline u8 rtl8152_get_speed(struc
+@@ -2634,21 +2634,24 @@ static inline u8 rtl8152_get_speed(struc
  	return ocp_read_byte(tp, MCU_TYPE_PLA, PLA_PHYSTATUS);
  }
  
@@ -50,7 +50,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  }
  
  static void rxdy_gated_en(struct r8152 *tp, bool enable)
-@@ -3127,10 +3130,22 @@ static void r8153b_ups_flags(struct r815
+@@ -3129,10 +3132,22 @@ static void r8153b_ups_flags(struct r815
  	ocp_write_dword(tp, MCU_TYPE_USB, USB_UPS_FLAGS, ups_flags);
  }
  
@@ -74,7 +74,7 @@ Signed-off-by: Jakub Kicinski <[email protected]>
  	if (enable) {
  		sram_write(tp, 0x8045, 0);	/* 10M abiq&ldvbias */
  		sram_write(tp, 0x804d, 0x1222);	/* 100M short abiq&ldvbias */
-@@ -3141,11 +3156,7 @@ static void r8153b_green_en(struct r8152
+@@ -3143,11 +3158,7 @@ static void r8153b_green_en(struct r8152
  		sram_write(tp, 0x805d, 0x2444);	/* 1000M short abiq&ldvbias */
  	}
  

target/linux/generic/backport-5.10/790-v5.13-r8152-set-inter-fram-gap-time-depending-on-speed.patch

@@ -34,7 +34,7 @@ Signed-off-by: David S. Miller <[email protected]>
  
  /* PLA_MTPS */
  #define MTPS_JUMBO		(12 * 1024 / 64)
-@@ -2747,6 +2750,29 @@ static int rtl_stop_rx(struct r8152 *tp)
+@@ -2749,6 +2752,29 @@ static int rtl_stop_rx(struct r8152 *tp)
  	return 0;
  }
  
@@ -64,7 +64,7 @@ Signed-off-by: David S. Miller <[email protected]>
  static inline void r8153b_rx_agg_chg_indicate(struct r8152 *tp)
  {
  	ocp_write_byte(tp, MCU_TYPE_USB, USB_UPT_RXDMA_OWN,
-@@ -2850,6 +2876,8 @@ static int rtl8153_enable(struct r8152 *
+@@ -2852,6 +2878,8 @@ static int rtl8153_enable(struct r8152 *
  	r8153_set_rx_early_timeout(tp);
  	r8153_set_rx_early_size(tp);
  

target/linux/generic/backport-5.10/791-v5.13-r8152-adjust-rtl8152_check_firmware-function.patch

@@ -30,7 +30,7 @@ Signed-off-by: David S. Miller <[email protected]>
  /**
   * struct fw_mac - a firmware block used by RTL_FW_PLA and RTL_FW_USB.
   *	The layout of the firmware block is:
-@@ -3800,10 +3808,7 @@ static long rtl8152_check_firmware(struc
+@@ -3802,10 +3810,7 @@ static long rtl8152_check_firmware(struc
  {
  	const struct firmware *fw = rtl_fw->fw;
  	struct fw_header *fw_hdr = (struct fw_header *)fw->data;
@@ -42,7 +42,7 @@ Signed-off-by: David S. Miller <[email protected]>
  	long ret = -EFAULT;
  	int i;
  
-@@ -3832,50 +3837,52 @@ static long rtl8152_check_firmware(struc
+@@ -3834,50 +3839,52 @@ static long rtl8152_check_firmware(struc
  				goto fail;
  			goto fw_end;
  		case RTL_FW_PLA:
@@ -106,7 +106,7 @@ Signed-off-by: David S. Miller <[email protected]>
  				dev_err(&tp->intf->dev,
  					"Check PHY_STOP fail\n");
  				goto fail;
-@@ -3886,28 +3893,28 @@ static long rtl8152_check_firmware(struc
+@@ -3888,28 +3895,28 @@ static long rtl8152_check_firmware(struc
  					"Invalid length for PHY_STOP\n");
  				goto fail;
  			}
@@ -141,7 +141,7 @@ Signed-off-by: David S. Miller <[email protected]>
  
  			break;
  		default:
-@@ -3921,7 +3928,7 @@ static long rtl8152_check_firmware(struc
+@@ -3923,7 +3930,7 @@ static long rtl8152_check_firmware(struc
  	}
  
  fw_end:

target/linux/generic/backport-5.10/792-v5.13-r8152-add-help-function-to-change-mtu.patch

@@ -57,7 +57,7 @@ Signed-off-by: David S. Miller <[email protected]>
  
  static
  int get_registers(struct r8152 *tp, u16 value, u16 index, u16 size, void *data)
-@@ -2632,10 +2630,7 @@ static void rtl8152_nic_reset(struct r81
+@@ -2634,10 +2632,7 @@ static void rtl8152_nic_reset(struct r81
  
  static void set_tx_qlen(struct r8152 *tp)
  {
@@ -69,7 +69,7 @@ Signed-off-by: David S. Miller <[email protected]>
  }
  
  static inline u8 rtl8152_get_speed(struct r8152 *tp)
-@@ -4724,6 +4719,12 @@ static void r8153b_hw_phy_cfg(struct r81
+@@ -4726,6 +4721,12 @@ static void r8153b_hw_phy_cfg(struct r81
  	set_bit(PHY_RESET, &tp->flags);
  }
  
@@ -82,7 +82,7 @@ Signed-off-by: David S. Miller <[email protected]>
  static void r8153_first_init(struct r8152 *tp)
  {
  	u32 ocp_data;
-@@ -4756,9 +4757,7 @@ static void r8153_first_init(struct r815
+@@ -4758,9 +4759,7 @@ static void r8153_first_init(struct r815
  
  	rtl_rx_vlan_en(tp, tp->netdev->features & NETIF_F_HW_VLAN_CTAG_RX);
  
@@ -93,7 +93,7 @@ Signed-off-by: David S. Miller <[email protected]>
  
  	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR0);
  	ocp_data |= TCR0_AUTO_FIFO;
-@@ -4793,8 +4792,7 @@ static void r8153_enter_oob(struct r8152
+@@ -4795,8 +4794,7 @@ static void r8153_enter_oob(struct r8152
  
  	wait_oob_link_list_ready(tp);
  
@@ -103,7 +103,7 @@ Signed-off-by: David S. Miller <[email protected]>
  
  	switch (tp->version) {
  	case RTL_VER_03:
-@@ -6495,12 +6493,21 @@ static int rtl8152_change_mtu(struct net
+@@ -6497,12 +6495,21 @@ static int rtl8152_change_mtu(struct net
  	dev->mtu = new_mtu;
  
  	if (netif_running(dev)) {
@@ -130,7 +130,7 @@ Signed-off-by: David S. Miller <[email protected]>
  	}
  
  	mutex_unlock(&tp->control);
-@@ -6589,6 +6596,7 @@ static int rtl_ops_init(struct r8152 *tp
+@@ -6591,6 +6598,7 @@ static int rtl_ops_init(struct r8152 *tp
  		ops->in_nway		= rtl8153_in_nway;
  		ops->hw_phy_cfg		= r8153_hw_phy_cfg;
  		ops->autosuspend_en	= rtl8153_runtime_enable;
@@ -138,7 +138,7 @@ Signed-off-by: David S. Miller <[email protected]>
  		if (tp->udev->speed < USB_SPEED_SUPER)
  			tp->rx_buf_sz	= 16 * 1024;
  		else
-@@ -6610,6 +6618,7 @@ static int rtl_ops_init(struct r8152 *tp
+@@ -6612,6 +6620,7 @@ static int rtl_ops_init(struct r8152 *tp
  		ops->in_nway		= rtl8153_in_nway;
  		ops->hw_phy_cfg		= r8153b_hw_phy_cfg;
  		ops->autosuspend_en	= rtl8153b_runtime_enable;
@@ -146,7 +146,7 @@ Signed-off-by: David S. Miller <[email protected]>
  		tp->rx_buf_sz		= 32 * 1024;
  		tp->eee_en		= true;
  		tp->eee_adv		= MDIO_EEE_1000T | MDIO_EEE_100TX;
-@@ -6830,7 +6839,7 @@ static int rtl8152_probe(struct usb_inte
+@@ -6832,7 +6841,7 @@ static int rtl8152_probe(struct usb_inte
  		netdev->max_mtu = ETH_DATA_LEN;
  		break;
  	default:

target/linux/generic/backport-5.10/793-v5.13-r8152-support-new-chips.patch

@@ -379,7 +379,7 @@ Signed-off-by: David S. Miller <[email protected]>
  
  /* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
   * The RTL chips use a 64 element hash table based on the Ethernet CRC.
-@@ -2606,7 +2711,7 @@ static netdev_tx_t rtl8152_start_xmit(st
+@@ -2608,7 +2713,7 @@ static netdev_tx_t rtl8152_start_xmit(st
  
  static void r8152b_reset_packet_filter(struct r8152 *tp)
  {
@@ -388,7 +388,7 @@ Signed-off-by: David S. Miller <[email protected]>
  
  	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_FMC);
  	ocp_data &= ~FMC_FCR_MCU_EN;
-@@ -2617,14 +2722,47 @@ static void r8152b_reset_packet_filter(s
+@@ -2619,14 +2724,47 @@ static void r8152b_reset_packet_filter(s
  
  static void rtl8152_nic_reset(struct r8152 *tp)
  {
@@ -442,7 +442,7 @@ Signed-off-by: David S. Miller <[email protected]>
  	}
  }
  
-@@ -2633,9 +2771,9 @@ static void set_tx_qlen(struct r8152 *tp
+@@ -2635,9 +2773,9 @@ static void set_tx_qlen(struct r8152 *tp
  	tp->tx_qlen = agg_buf_sz / (mtu_to_size(tp->netdev->mtu) + sizeof(struct tx_desc));
  }
  
@@ -454,7 +454,7 @@ Signed-off-by: David S. Miller <[email protected]>
  }
  
  static void rtl_eee_plus_en(struct r8152 *tp, bool enable)
-@@ -2795,6 +2933,7 @@ static int rtl_enable(struct r8152 *tp)
+@@ -2797,6 +2935,7 @@ static int rtl_enable(struct r8152 *tp)
  	switch (tp->version) {
  	case RTL_VER_08:
  	case RTL_VER_09:
@@ -462,7 +462,7 @@ Signed-off-by: David S. Miller <[email protected]>
  		r8153b_rx_agg_chg_indicate(tp);
  		break;
  	default:
-@@ -2832,6 +2971,7 @@ static void r8153_set_rx_early_timeout(s
+@@ -2834,6 +2973,7 @@ static void r8153_set_rx_early_timeout(s
  
  	case RTL_VER_08:
  	case RTL_VER_09:
@@ -470,7 +470,7 @@ Signed-off-by: David S. Miller <[email protected]>
  		/* The RTL8153B uses USB_RX_EXTRA_AGGR_TMR for rx timeout
  		 * primarily. For USB_RX_EARLY_TIMEOUT, we fix it to 128ns.
  		 */
-@@ -2841,6 +2981,18 @@ static void r8153_set_rx_early_timeout(s
+@@ -2843,6 +2983,18 @@ static void r8153_set_rx_early_timeout(s
  			       ocp_data);
  		break;
  
@@ -489,7 +489,7 @@ Signed-off-by: David S. Miller <[email protected]>
  	default:
  		break;
  	}
-@@ -2860,8 +3012,19 @@ static void r8153_set_rx_early_size(stru
+@@ -2862,8 +3014,19 @@ static void r8153_set_rx_early_size(stru
  		break;
  	case RTL_VER_08:
  	case RTL_VER_09:
@@ -509,7 +509,7 @@ Signed-off-by: David S. Miller <[email protected]>
  		break;
  	default:
  		WARN_ON_ONCE(1);
-@@ -2871,6 +3034,8 @@ static void r8153_set_rx_early_size(stru
+@@ -2873,6 +3036,8 @@ static void r8153_set_rx_early_size(stru
  
  static int rtl8153_enable(struct r8152 *tp)
  {
@@ -518,7 +518,7 @@ Signed-off-by: David S. Miller <[email protected]>
  	if (test_bit(RTL8152_UNPLUG, &tp->flags))
  		return -ENODEV;
  
-@@ -2881,15 +3046,18 @@ static int rtl8153_enable(struct r8152 *
+@@ -2883,15 +3048,18 @@ static int rtl8153_enable(struct r8152 *
  
  	rtl_set_ifg(tp, rtl8152_get_speed(tp));
  
@@ -540,7 +540,7 @@ Signed-off-by: David S. Miller <[email protected]>
  	}
  
  	return rtl_enable(tp);
-@@ -2954,12 +3122,40 @@ static void rtl_rx_vlan_en(struct r8152
+@@ -2956,12 +3124,40 @@ static void rtl_rx_vlan_en(struct r8152
  {
  	u32 ocp_data;
  
@@ -587,7 +587,7 @@ Signed-off-by: David S. Miller <[email protected]>
  }
  
  static int rtl8152_set_features(struct net_device *dev,
-@@ -3052,6 +3248,40 @@ static void __rtl_set_wol(struct r8152 *
+@@ -3054,6 +3250,40 @@ static void __rtl_set_wol(struct r8152 *
  		device_set_wakeup_enable(&tp->udev->dev, false);
  }
  
@@ -628,7 +628,7 @@ Signed-off-by: David S. Miller <[email protected]>
  static void r8153_u1u2en(struct r8152 *tp, bool enable)
  {
  	u8 u1u2[8];
-@@ -3111,6 +3341,9 @@ static void r8153b_ups_flags(struct r815
+@@ -3113,6 +3343,9 @@ static void r8153b_ups_flags(struct r815
  	if (tp->ups_info.eee_cmod_lv)
  		ups_flags |= UPS_FLAGS_EEE_CMOD_LV_EN;
  
@@ -638,7 +638,7 @@ Signed-off-by: David S. Miller <[email protected]>
  	if (tp->ups_info._10m_ckdiv)
  		ups_flags |= UPS_FLAGS_EN_10M_CKDIV;
  
-@@ -3161,6 +3394,88 @@ static void r8153b_ups_flags(struct r815
+@@ -3163,6 +3396,88 @@ static void r8153b_ups_flags(struct r815
  	ocp_write_dword(tp, MCU_TYPE_USB, USB_UPS_FLAGS, ups_flags);
  }
  
@@ -727,7 +727,7 @@ Signed-off-by: David S. Miller <[email protected]>
  static void rtl_green_en(struct r8152 *tp, bool enable)
  {
  	u16 data;
-@@ -3224,16 +3539,16 @@ static void r8153b_ups_en(struct r8152 *
+@@ -3226,16 +3541,16 @@ static void r8153b_ups_en(struct r8152 *
  		ocp_data |= UPS_EN | USP_PREWAKE | PHASE2_EN;
  		ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
  
@@ -750,7 +750,7 @@ Signed-off-by: David S. Miller <[email protected]>
  
  		if (ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0) & PCUT_STATUS) {
  			int i;
-@@ -3253,6 +3568,95 @@ static void r8153b_ups_en(struct r8152 *
+@@ -3255,6 +3570,95 @@ static void r8153b_ups_en(struct r8152 *
  	}
  }
  
@@ -846,7 +846,7 @@ Signed-off-by: David S. Miller <[email protected]>
  static void r8153_power_cut_en(struct r8152 *tp, bool enable)
  {
  	u32 ocp_data;
-@@ -3382,6 +3786,38 @@ static void rtl8153b_runtime_enable(stru
+@@ -3384,6 +3788,38 @@ static void rtl8153b_runtime_enable(stru
  	}
  }
  
@@ -885,7 +885,7 @@ Signed-off-by: David S. Miller <[email protected]>
  static void r8153_teredo_off(struct r8152 *tp)
  {
  	u32 ocp_data;
-@@ -3402,14 +3838,19 @@ static void r8153_teredo_off(struct r815
+@@ -3404,14 +3840,19 @@ static void r8153_teredo_off(struct r815
  
  	case RTL_VER_08:
  	case RTL_VER_09:
@@ -908,7 +908,7 @@ Signed-off-by: David S. Miller <[email protected]>
  	}
  
  	ocp_write_word(tp, MCU_TYPE_PLA, PLA_WDT6_CTRL, WDT6_SET_MODE);
-@@ -3444,6 +3885,12 @@ static void rtl_clear_bp(struct r8152 *t
+@@ -3446,6 +3887,12 @@ static void rtl_clear_bp(struct r8152 *t
  		break;
  	case RTL_VER_08:
  	case RTL_VER_09:
@@ -921,7 +921,7 @@ Signed-off-by: David S. Miller <[email protected]>
  	default:
  		if (type == MCU_TYPE_USB) {
  			ocp_write_word(tp, MCU_TYPE_USB, USB_BP2_EN, 0);
-@@ -3653,6 +4100,11 @@ static bool rtl8152_is_fw_mac_ok(struct
+@@ -3655,6 +4102,11 @@ static bool rtl8152_is_fw_mac_ok(struct
  		case RTL_VER_06:
  		case RTL_VER_08:
  		case RTL_VER_09:
@@ -933,7 +933,7 @@ Signed-off-by: David S. Miller <[email protected]>
  			fw_reg = 0xf800;
  			bp_ba_addr = PLA_BP_BA;
  			bp_en_addr = PLA_BP_EN;
-@@ -3676,6 +4128,11 @@ static bool rtl8152_is_fw_mac_ok(struct
+@@ -3678,6 +4130,11 @@ static bool rtl8152_is_fw_mac_ok(struct
  			break;
  		case RTL_VER_08:
  		case RTL_VER_09:
@@ -945,7 +945,7 @@ Signed-off-by: David S. Miller <[email protected]>
  			fw_reg = 0xe600;
  			bp_ba_addr = USB_BP_BA;
  			bp_en_addr = USB_BP2_EN;
-@@ -4215,6 +4672,22 @@ static void r8153_eee_en(struct r8152 *t
+@@ -4217,6 +4674,22 @@ static void r8153_eee_en(struct r8152 *t
  	tp->ups_info.eee = enable;
  }
  
@@ -968,7 +968,7 @@ Signed-off-by: David S. Miller <[email protected]>
  static void rtl_eee_enable(struct r8152 *tp, bool enable)
  {
  	switch (tp->version) {
-@@ -4236,6 +4709,7 @@ static void rtl_eee_enable(struct r8152
+@@ -4238,6 +4711,7 @@ static void rtl_eee_enable(struct r8152
  	case RTL_VER_06:
  	case RTL_VER_08:
  	case RTL_VER_09:
@@ -976,7 +976,7 @@ Signed-off-by: David S. Miller <[email protected]>
  		if (enable) {
  			r8153_eee_en(tp, true);
  			ocp_reg_write(tp, OCP_EEE_ADV, tp->eee_adv);
-@@ -4244,6 +4718,19 @@ static void rtl_eee_enable(struct r8152
+@@ -4246,6 +4720,19 @@ static void rtl_eee_enable(struct r8152
  			ocp_reg_write(tp, OCP_EEE_ADV, 0);
  		}
  		break;
@@ -996,7 +996,7 @@ Signed-off-by: David S. Miller <[email protected]>
  	default:
  		break;
  	}
-@@ -4290,6 +4777,20 @@ static void wait_oob_link_list_ready(str
+@@ -4292,6 +4779,20 @@ static void wait_oob_link_list_ready(str
  	}
  }
  
@@ -1017,7 +1017,7 @@ Signed-off-by: David S. Miller <[email protected]>
  static void r8152b_exit_oob(struct r8152 *tp)
  {
  	u32 ocp_data;
-@@ -4340,7 +4841,7 @@ static void r8152b_exit_oob(struct r8152
+@@ -4342,7 +4843,7 @@ static void r8152b_exit_oob(struct r8152
  	}
  
  	/* TX share fifo free credit full threshold */
@@ -1026,7 +1026,7 @@ Signed-off-by: David S. Miller <[email protected]>
  
  	ocp_write_byte(tp, MCU_TYPE_USB, USB_TX_AGG, TX_AGG_MAX_THRESHOLD);
  	ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, RX_THR_HIGH);
-@@ -4517,6 +5018,21 @@ static int r8153b_post_firmware_1(struct
+@@ -4519,6 +5020,21 @@ static int r8153b_post_firmware_1(struct
  	return 0;
  }
  
@@ -1048,7 +1048,7 @@ Signed-off-by: David S. Miller <[email protected]>
  static void r8153_aldps_en(struct r8152 *tp, bool enable)
  {
  	u16 data;
-@@ -4719,6 +5235,13 @@ static void r8153b_hw_phy_cfg(struct r81
+@@ -4721,6 +5237,13 @@ static void r8153b_hw_phy_cfg(struct r81
  	set_bit(PHY_RESET, &tp->flags);
  }
  
@@ -1062,7 +1062,7 @@ Signed-off-by: David S. Miller <[email protected]>
  static void rtl8153_change_mtu(struct r8152 *tp)
  {
  	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, mtu_to_size(tp->netdev->mtu));
-@@ -4806,6 +5329,7 @@ static void r8153_enter_oob(struct r8152
+@@ -4808,6 +5331,7 @@ static void r8153_enter_oob(struct r8152
  
  	case RTL_VER_08:
  	case RTL_VER_09:
@@ -1070,7 +1070,7 @@ Signed-off-by: David S. Miller <[email protected]>
  		/* Clear teredo wake event. bit[15:8] is the teredo wakeup
  		 * type. Set it to zero. bits[7:0] are the W1C bits about
  		 * the events. Set them to all 1 to clear them.
-@@ -4842,6 +5366,96 @@ static void rtl8153_disable(struct r8152
+@@ -4844,6 +5368,96 @@ static void rtl8153_disable(struct r8152
  	r8153_aldps_en(tp, true);
  }
  
@@ -1167,7 +1167,7 @@ Signed-off-by: David S. Miller <[email protected]>
  static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u32 speed, u8 duplex,
  			     u32 advertising)
  {
-@@ -4890,58 +5504,73 @@ static int rtl8152_set_speed(struct r815
+@@ -4892,58 +5506,73 @@ static int rtl8152_set_speed(struct r815
  
  		tp->mii.force_media = 1;
  	} else {
@@ -1259,7 +1259,7 @@ Signed-off-by: David S. Miller <[email protected]>
  		}
  
  		bmcr = BMCR_ANENABLE | BMCR_ANRESTART;
-@@ -5097,6 +5726,253 @@ static void rtl8153b_down(struct r8152 *
+@@ -5099,6 +5728,253 @@ static void rtl8153b_down(struct r8152 *
  	r8153_aldps_en(tp, true);
  }
  
@@ -1513,7 +1513,7 @@ Signed-off-by: David S. Miller <[email protected]>
  static bool rtl8152_in_nway(struct r8152 *tp)
  {
  	u16 nway_state;
-@@ -5127,7 +6003,7 @@ static void set_carrier(struct r8152 *tp
+@@ -5129,7 +6005,7 @@ static void set_carrier(struct r8152 *tp
  {
  	struct net_device *netdev = tp->netdev;
  	struct napi_struct *napi = &tp->napi;
@@ -1522,7 +1522,7 @@ Signed-off-by: David S. Miller <[email protected]>
  
  	speed = rtl8152_get_speed(tp);
  
-@@ -5140,7 +6016,7 @@ static void set_carrier(struct r8152 *tp
+@@ -5142,7 +6018,7 @@ static void set_carrier(struct r8152 *tp
  			rtl_start_rx(tp);
  			clear_bit(RTL8152_SET_RX_MODE, &tp->flags);
  			_rtl8152_set_rx_mode(netdev);
@@ -1531,7 +1531,7 @@ Signed-off-by: David S. Miller <[email protected]>
  			netif_wake_queue(netdev);
  			netif_info(tp, link, netdev, "carrier on\n");
  		} else if (netif_queue_stopped(netdev) &&
-@@ -5502,14 +6378,9 @@ static void r8153_init(struct r8152 *tp)
+@@ -5504,14 +6380,9 @@ static void r8153_init(struct r8152 *tp)
  
  	ocp_write_word(tp, MCU_TYPE_USB, USB_CONNECT_TIMER, 0x0001);
  
@@ -1547,7 +1547,7 @@ Signed-off-by: David S. Miller <[email protected]>
  	r8153_u1u2en(tp, true);
  	usb_enable_lpm(tp->udev);
  
-@@ -5600,9 +6471,7 @@ static void r8153b_init(struct r8152 *tp
+@@ -5602,9 +6473,7 @@ static void r8153b_init(struct r8152 *tp
  	usb_enable_lpm(tp->udev);
  
  	/* MAC clock speed down */
@@ -1558,7 +1558,7 @@ Signed-off-by: David S. Miller <[email protected]>
  
  	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3);
  	ocp_data &= ~PLA_MCU_SPDWN_EN;
-@@ -5629,6 +6498,1069 @@ static void r8153b_init(struct r8152 *tp
+@@ -5631,6 +6500,1069 @@ static void r8153b_init(struct r8152 *tp
  	tp->coalesce = 15000;	/* 15 us */
  }
  
@@ -2628,7 +2628,7 @@ Signed-off-by: David S. Miller <[email protected]>
  static int rtl8152_pre_reset(struct usb_interface *intf)
  {
  	struct r8152 *tp = usb_get_intfdata(intf);
-@@ -5992,6 +7924,22 @@ int rtl8152_get_link_ksettings(struct ne
+@@ -5994,6 +7926,22 @@ int rtl8152_get_link_ksettings(struct ne
  
  	mii_ethtool_get_link_ksettings(&tp->mii, cmd);
  
@@ -2651,7 +2651,7 @@ Signed-off-by: David S. Miller <[email protected]>
  	mutex_unlock(&tp->control);
  
  	usb_autopm_put_interface(tp->intf);
-@@ -6035,6 +7983,10 @@ static int rtl8152_set_link_ksettings(st
+@@ -6037,6 +7985,10 @@ static int rtl8152_set_link_ksettings(st
  		     cmd->link_modes.advertising))
  		advertising |= RTL_ADVERTISED_1000_FULL;
  
@@ -2662,7 +2662,7 @@ Signed-off-by: David S. Miller <[email protected]>
  	mutex_lock(&tp->control);
  
  	ret = rtl8152_set_speed(tp, cmd->base.autoneg, cmd->base.speed,
-@@ -6624,6 +8576,67 @@ static int rtl_ops_init(struct r8152 *tp
+@@ -6626,6 +8578,67 @@ static int rtl_ops_init(struct r8152 *tp
  		tp->eee_adv		= MDIO_EEE_1000T | MDIO_EEE_100TX;
  		break;
  
@@ -2730,7 +2730,7 @@ Signed-off-by: David S. Miller <[email protected]>
  	default:
  		ret = -ENODEV;
  		dev_err(&tp->intf->dev, "Unknown Device\n");
-@@ -6637,11 +8650,13 @@ static int rtl_ops_init(struct r8152 *tp
+@@ -6639,11 +8652,13 @@ static int rtl_ops_init(struct r8152 *tp
  #define FIRMWARE_8153A_3	"rtl_nic/rtl8153a-3.fw"
  #define FIRMWARE_8153A_4	"rtl_nic/rtl8153a-4.fw"
  #define FIRMWARE_8153B_2	"rtl_nic/rtl8153b-2.fw"
@@ -2744,7 +2744,7 @@ Signed-off-by: David S. Miller <[email protected]>
  
  static int rtl_fw_init(struct r8152 *tp)
  {
-@@ -6667,6 +8682,11 @@ static int rtl_fw_init(struct r8152 *tp)
+@@ -6669,6 +8684,11 @@ static int rtl_fw_init(struct r8152 *tp)
  		rtl_fw->pre_fw		= r8153b_pre_firmware_1;
  		rtl_fw->post_fw		= r8153b_post_firmware_1;
  		break;
@@ -2756,7 +2756,7 @@ Signed-off-by: David S. Miller <[email protected]>
  	default:
  		break;
  	}
-@@ -6722,6 +8742,27 @@ u8 rtl8152_get_version(struct usb_interf
+@@ -6724,6 +8744,27 @@ u8 rtl8152_get_version(struct usb_interf
  	case 0x6010:
  		version = RTL_VER_09;
  		break;
@@ -2784,7 +2784,7 @@ Signed-off-by: David S. Miller <[email protected]>
  	default:
  		version = RTL_VER_UNKNOWN;
  		dev_info(&intf->dev, "Unknown version 0x%04x\n", ocp_data);
-@@ -6834,12 +8875,29 @@ static int rtl8152_probe(struct usb_inte
+@@ -6836,12 +8877,29 @@ static int rtl8152_probe(struct usb_inte
  	/* MTU range: 68 - 1500 or 9194 */
  	netdev->min_mtu = ETH_MIN_MTU;
  	switch (tp->version) {
@@ -2817,7 +2817,7 @@ Signed-off-by: David S. Miller <[email protected]>
  		break;
  	}
  
-@@ -6855,7 +8913,13 @@ static int rtl8152_probe(struct usb_inte
+@@ -6857,7 +8915,13 @@ static int rtl8152_probe(struct usb_inte
  	tp->advertising = RTL_ADVERTISED_10_HALF | RTL_ADVERTISED_10_FULL |
  			  RTL_ADVERTISED_100_HALF | RTL_ADVERTISED_100_FULL;
  	if (tp->mii.supports_gmii) {
@@ -2832,7 +2832,7 @@ Signed-off-by: David S. Miller <[email protected]>
  		tp->advertising |= RTL_ADVERTISED_1000_FULL;
  	}
  	tp->duplex = DUPLEX_FULL;
-@@ -6879,7 +8943,11 @@ static int rtl8152_probe(struct usb_inte
+@@ -6881,7 +8945,11 @@ static int rtl8152_probe(struct usb_inte
  	set_ethernet_addr(tp);
  
  	usb_set_intfdata(intf, tp);
@@ -2845,7 +2845,7 @@ Signed-off-by: David S. Miller <[email protected]>
  
  	ret = register_netdev(netdev);
  	if (ret != 0) {
-@@ -6915,7 +8983,8 @@ static void rtl8152_disconnect(struct us
+@@ -6917,7 +8985,8 @@ static void rtl8152_disconnect(struct us
  		unregister_netdev(tp->netdev);
  		tasklet_kill(&tp->tx_tl);
  		cancel_delayed_work_sync(&tp->hw_phy_work);
@@ -2855,7 +2855,7 @@ Signed-off-by: David S. Miller <[email protected]>
  		rtl8152_release_firmware(tp);
  		free_netdev(tp->netdev);
  	}
-@@ -6935,13 +9004,28 @@ static void rtl8152_disconnect(struct us
+@@ -6937,13 +9006,28 @@ static void rtl8152_disconnect(struct us
  	.idProduct = (prod), \
  	.bInterfaceClass = USB_CLASS_COMM, \
  	.bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \

target/linux/generic/backport-5.10/794-v5.13-r8152-support-PHY-firmware-for-RTL8156-series.patch

@@ -92,7 +92,7 @@ Signed-off-by: David S. Miller <[email protected]>
  };
  
  enum rtl_version {
-@@ -3999,6 +4060,162 @@ static int rtl_post_ram_code(struct r815
+@@ -4001,6 +4062,162 @@ static int rtl_post_ram_code(struct r815
  	return 0;
  }
  
@@ -255,7 +255,7 @@ Signed-off-by: David S. Miller <[email protected]>
  static bool rtl8152_is_fw_phy_nc_ok(struct r8152 *tp, struct fw_phy_nc *phy)
  {
  	u32 length;
-@@ -4319,6 +4536,10 @@ static long rtl8152_check_firmware(struc
+@@ -4321,6 +4538,10 @@ static long rtl8152_check_firmware(struc
  		case RTL_FW_PHY_START:
  			if (test_bit(FW_FLAGS_START, &fw_flags) ||
  			    test_bit(FW_FLAGS_NC, &fw_flags) ||
@@ -266,7 +266,7 @@ Signed-off-by: David S. Miller <[email protected]>
  			    test_bit(FW_FLAGS_STOP, &fw_flags)) {
  				dev_err(&tp->intf->dev,
  					"check PHY_START fail\n");
-@@ -4367,7 +4588,153 @@ static long rtl8152_check_firmware(struc
+@@ -4369,7 +4590,153 @@ static long rtl8152_check_firmware(struc
  				goto fail;
  			}
  			__set_bit(FW_FLAGS_NC, &fw_flags);
@@ -420,7 +420,7 @@ Signed-off-by: David S. Miller <[email protected]>
  			break;
  		default:
  			dev_warn(&tp->intf->dev, "Unknown type %u is found\n",
-@@ -4390,6 +4757,143 @@ fail:
+@@ -4392,6 +4759,143 @@ fail:
  	return ret;
  }
  
@@ -564,7 +564,7 @@ Signed-off-by: David S. Miller <[email protected]>
  static void rtl8152_fw_phy_nc_apply(struct r8152 *tp, struct fw_phy_nc *phy)
  {
  	u16 mode_reg, bp_index;
-@@ -4443,6 +4947,12 @@ static void rtl8152_fw_mac_apply(struct
+@@ -4445,6 +4949,12 @@ static void rtl8152_fw_mac_apply(struct
  		return;
  	}
  
@@ -577,7 +577,7 @@ Signed-off-by: David S. Miller <[email protected]>
  	rtl_clear_bp(tp, type);
  
  	/* Enable backup/restore of MACDBG. This is required after clearing PLA
-@@ -4478,7 +4988,6 @@ static void rtl8152_fw_mac_apply(struct
+@@ -4480,7 +4990,6 @@ static void rtl8152_fw_mac_apply(struct
  		ocp_write_word(tp, type, bp_en_addr,
  			       __le16_to_cpu(mac->bp_en_value));
  
@@ -585,7 +585,7 @@ Signed-off-by: David S. Miller <[email protected]>
  	if (fw_ver_reg)
  		ocp_write_byte(tp, MCU_TYPE_USB, fw_ver_reg,
  			       mac->fw_ver_data);
-@@ -4493,7 +5002,7 @@ static void rtl8152_apply_firmware(struc
+@@ -4495,7 +5004,7 @@ static void rtl8152_apply_firmware(struc
  	struct fw_header *fw_hdr;
  	struct fw_phy_patch_key *key;
  	u16 key_addr = 0;
@@ -594,7 +594,7 @@ Signed-off-by: David S. Miller <[email protected]>
  
  	if (IS_ERR_OR_NULL(rtl_fw->fw))
  		return;
-@@ -4515,17 +5024,40 @@ static void rtl8152_apply_firmware(struc
+@@ -4517,17 +5026,40 @@ static void rtl8152_apply_firmware(struc
  			rtl8152_fw_mac_apply(tp, (struct fw_mac *)block);
  			break;
  		case RTL_FW_PHY_START:
@@ -635,7 +635,7 @@ Signed-off-by: David S. Miller <[email protected]>
  		default:
  			break;
  		}
-@@ -5033,6 +5565,21 @@ static int r8153c_post_firmware_1(struct
+@@ -5035,6 +5567,21 @@ static int r8153c_post_firmware_1(struct
  	return 0;
  }
  
@@ -657,7 +657,7 @@ Signed-off-by: David S. Miller <[email protected]>
  static void r8153_aldps_en(struct r8152 *tp, bool enable)
  {
  	u16 data;
-@@ -8651,12 +9198,16 @@ static int rtl_ops_init(struct r8152 *tp
+@@ -8653,12 +9200,16 @@ static int rtl_ops_init(struct r8152 *tp
  #define FIRMWARE_8153A_4	"rtl_nic/rtl8153a-4.fw"
  #define FIRMWARE_8153B_2	"rtl_nic/rtl8153b-2.fw"
  #define FIRMWARE_8153C_1	"rtl_nic/rtl8153c-1.fw"
@@ -674,7 +674,7 @@ Signed-off-by: David S. Miller <[email protected]>
  
  static int rtl_fw_init(struct r8152 *tp)
  {
-@@ -8682,6 +9233,14 @@ static int rtl_fw_init(struct r8152 *tp)
+@@ -8684,6 +9235,14 @@ static int rtl_fw_init(struct r8152 *tp)
  		rtl_fw->pre_fw		= r8153b_pre_firmware_1;
  		rtl_fw->post_fw		= r8153b_post_firmware_1;
  		break;

target/linux/generic/backport-5.10/795-v5.13-r8152-search-the-configuration-of-vendor-mode.patch

@@ -25,7 +25,7 @@ Signed-off-by: David S. Miller <[email protected]>
  
  /* Information for net */
  #define NET_VERSION		"11"
-@@ -8108,6 +8108,39 @@ static void r8156b_init(struct r8152 *tp
+@@ -8110,6 +8110,39 @@ static void r8156b_init(struct r8152 *tp
  	tp->coalesce = 15000;	/* 15 us */
  }
  
@@ -65,7 +65,7 @@ Signed-off-by: David S. Miller <[email protected]>
  static int rtl8152_pre_reset(struct usb_interface *intf)
  {
  	struct r8152 *tp = usb_get_intfdata(intf);
-@@ -9346,10 +9379,8 @@ static int rtl8152_probe(struct usb_inte
+@@ -9348,10 +9381,8 @@ static int rtl8152_probe(struct usb_inte
  	if (version == RTL_VER_UNKNOWN)
  		return -ENODEV;
  

target/linux/generic/hack-5.10/721-net-add-packet-mangeling.patch

@@ -60,7 +60,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
   */
 --- a/include/linux/skbuff.h
 +++ b/include/linux/skbuff.h
-@@ -2718,6 +2718,10 @@ static inline int pskb_trim(struct sk_bu
+@@ -2720,6 +2720,10 @@ static inline int pskb_trim(struct sk_bu
  	return (len < skb->len) ? __pskb_trim(skb, len) : 0;
  }
  
@@ -71,7 +71,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
  /**
   *	pskb_trim_unique - remove end from a paged unique (not cloned) buffer
   *	@skb: buffer to alter
-@@ -2849,16 +2853,6 @@ static inline struct sk_buff *dev_alloc_
+@@ -2851,16 +2855,6 @@ static inline struct sk_buff *dev_alloc_
  }
  
  

target/linux/generic/hack-5.10/760-net-usb-r8152-add-LED-configuration-from-OF.patch

@@ -22,7 +22,7 @@ Signed-off-by: David Bauer <[email protected]>
  #include <linux/crc32.h>
  #include <linux/if_vlan.h>
  #include <linux/uaccess.h>
-@@ -6780,6 +6781,22 @@ static void rtl_tally_reset(struct r8152
+@@ -6782,6 +6783,22 @@ static void rtl_tally_reset(struct r8152
  	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RSTTALLY, ocp_data);
  }
  
@@ -45,7 +45,7 @@ Signed-off-by: David Bauer <[email protected]>
  static void r8152b_init(struct r8152 *tp)
  {
  	u32 ocp_data;
-@@ -6821,6 +6838,8 @@ static void r8152b_init(struct r8152 *tp
+@@ -6823,6 +6840,8 @@ static void r8152b_init(struct r8152 *tp
  	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
  	ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN);
  	ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
@@ -54,7 +54,7 @@ Signed-off-by: David Bauer <[email protected]>
  }
  
  static void r8153_init(struct r8152 *tp)
-@@ -6961,6 +6980,8 @@ static void r8153_init(struct r8152 *tp)
+@@ -6963,6 +6982,8 @@ static void r8153_init(struct r8152 *tp)
  		tp->coalesce = COALESCE_SLOW;
  		break;
  	}
@@ -63,7 +63,7 @@ Signed-off-by: David Bauer <[email protected]>
  }
  
  static void r8153b_init(struct r8152 *tp)
-@@ -7043,6 +7064,8 @@ static void r8153b_init(struct r8152 *tp
+@@ -7045,6 +7066,8 @@ static void r8153b_init(struct r8152 *tp
  	rtl_tally_reset(tp);
  
  	tp->coalesce = 15000;	/* 15 us */

target/linux/generic/pending-5.10/655-increase_skb_pad.patch

@@ -9,7 +9,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
 
 --- a/include/linux/skbuff.h
 +++ b/include/linux/skbuff.h
-@@ -2684,7 +2684,7 @@ static inline int pskb_network_may_pull(
+@@ -2686,7 +2686,7 @@ static inline int pskb_network_may_pull(
   * NET_IP_ALIGN(2) + ethernet_header(14) + IP_header(20/40) + ports(8)
   */
  #ifndef NET_SKB_PAD

target/linux/generic/pending-5.10/680-NET-skip-GRO-for-foreign-MAC-addresses.patch

@@ -22,10 +22,10 @@ Signed-off-by: Felix Fietkau <[email protected]>
  #endif
 --- a/include/linux/skbuff.h
 +++ b/include/linux/skbuff.h
-@@ -858,6 +858,7 @@ struct sk_buff {
- #ifdef CONFIG_TLS_DEVICE
+@@ -860,6 +860,7 @@ struct sk_buff {
  	__u8			decrypted:1;
  #endif
+ 	__u8			scm_io_uring:1;
 +	__u8			gro_skip:1;
  
  #ifdef CONFIG_NET_SCHED

target/linux/ipq40xx/patches-5.10/400-mmc-sdhci-sdhci-msm-use-sdhci_set_clock-instead-of-s.patch

@@ -13,7 +13,7 @@ Signed-off-by: Robert Marko <[email protected]>
 
 --- a/drivers/mmc/host/sdhci-msm.c
 +++ b/drivers/mmc/host/sdhci-msm.c
-@@ -2192,7 +2192,7 @@ MODULE_DEVICE_TABLE(of, sdhci_msm_dt_mat
+@@ -2193,7 +2193,7 @@ MODULE_DEVICE_TABLE(of, sdhci_msm_dt_mat
  
  static const struct sdhci_ops sdhci_msm_ops = {
  	.reset = sdhci_msm_reset,

target/linux/ipq806x/patches-5.10/101-5.12-mtd-parsers-Add-Qcom-SMEM-parser.patch

@@ -19,7 +19,7 @@ Link: https://lore.kernel.org/linux-mtd/20210104041137.113075-3-manivannan.sadha
 
 --- a/drivers/mtd/parsers/Kconfig
 +++ b/drivers/mtd/parsers/Kconfig
-@@ -205,6 +205,14 @@ config MTD_SERCOMM_PARTS
+@@ -220,6 +220,14 @@ config MTD_SERCOMM_PARTS
  	  offsets, which may differ from device to device depending on the
  	  number and location of bad blocks on NAND.
  
@@ -36,7 +36,7 @@ Link: https://lore.kernel.org/linux-mtd/20210104041137.113075-3-manivannan.sadha
  	depends on MTD && OF
 --- a/drivers/mtd/parsers/Makefile
 +++ b/drivers/mtd/parsers/Makefile
-@@ -14,4 +14,5 @@ obj-$(CONFIG_MTD_PARSER_TRX)		+= parser_
+@@ -15,4 +15,5 @@ obj-$(CONFIG_MTD_PARSER_TRX)		+= parser_
  obj-$(CONFIG_MTD_SERCOMM_PARTS)		+= scpart.o
  obj-$(CONFIG_MTD_SHARPSL_PARTS)		+= sharpslpart.o
  obj-$(CONFIG_MTD_REDBOOT_PARTS)		+= redboot.o

target/linux/mpc85xx/patches-5.10/100-powerpc-85xx-tl-wdr4900-v1-support.patch

@@ -19,7 +19,7 @@ Signed-off-by: Pawel Dembicki <[email protected]>
 
 --- a/arch/powerpc/boot/Makefile
 +++ b/arch/powerpc/boot/Makefile
-@@ -157,6 +157,7 @@ src-plat-$(CONFIG_PPC_PSERIES) += pserie
+@@ -158,6 +158,7 @@ src-plat-$(CONFIG_PPC_PSERIES) += pserie
  src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S
  src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S
  src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c
@@ -27,7 +27,7 @@ Signed-off-by: Pawel Dembicki <[email protected]>
  
  src-wlib := $(sort $(src-wlib-y))
  src-plat := $(sort $(src-plat-y))
-@@ -336,7 +337,7 @@ image-$(CONFIG_TQM8555)			+= cuImage.tqm
+@@ -337,7 +338,7 @@ image-$(CONFIG_TQM8555)			+= cuImage.tqm
  image-$(CONFIG_TQM8560)			+= cuImage.tqm8560
  image-$(CONFIG_SBC8548)			+= cuImage.sbc8548
  image-$(CONFIG_KSI8560)			+= cuImage.ksi8560

target/linux/mpc85xx/patches-5.10/900-powerpc-bootwrapper-disable-uImage-generation.patch

@@ -16,7 +16,7 @@ Signed-off-by: David Bauer <[email protected]>
 
 --- a/arch/powerpc/boot/Makefile
 +++ b/arch/powerpc/boot/Makefile
-@@ -264,7 +264,6 @@ image-$(CONFIG_PPC_CHRP)		+= zImage.chrp
+@@ -265,7 +265,6 @@ image-$(CONFIG_PPC_CHRP)		+= zImage.chrp
  image-$(CONFIG_PPC_EFIKA)		+= zImage.chrp
  image-$(CONFIG_PPC_PMAC)		+= zImage.pmac
  image-$(CONFIG_PPC_HOLLY)		+= dtbImage.holly
@@ -24,7 +24,7 @@ Signed-off-by: David Bauer <[email protected]>
  image-$(CONFIG_EPAPR_BOOT)		+= zImage.epapr
  
  #
-@@ -395,15 +394,6 @@ $(obj)/dtbImage.%: vmlinux $(wrapperbits
+@@ -396,15 +395,6 @@ $(obj)/dtbImage.%: vmlinux $(wrapperbits
  $(obj)/vmlinux.strip: vmlinux
  	$(STRIP) -s -R .comment $< -o $@