base-files: procd init is now the default, remove files.old

Signed-off-by: John Crispin <[email protected]>

SVN-Revision: 36996

package/base-files/Makefile

@@ -62,12 +62,6 @@ config PROCD_INIT
 	default n
 endef
 
-ifeq ($(CONFIG_PROCD_INIT),)
-define InstallOldFiles
-	$(CP) ./files.old/* $(1)/
-endef
-endif
-
 ifneq ($(CONFIG_PREINITOPT),)
 define ImageConfigOptions
 	mkdir -p $(1)/lib/preinit
@@ -100,7 +94,6 @@ define Package/base-files/install
 	if [ -d $(GENERIC_PLATFORM_DIR)/base-files/. ]; then \
 		$(CP) $(GENERIC_PLATFORM_DIR)/base-files/* $(1)/; \
 	fi
-	$(call InstallOldFiles,$(1))
 	if [ -d $(PLATFORM_DIR)/base-files/. ]; then \
 		$(CP) $(PLATFORM_DIR)/base-files/* $(1)/; \
 	fi

package/base-files/files.old/etc/hotplug2-common.rules

@@ -1,43 +0,0 @@
-
-# uncomment me to log hotplug events
-# DEVPATH is set {
-# 	exec logger -s -t hotplug -p daemon.info "name=%DEVNAME%, path=%DEVPATH%"
-# }
-
-$include /etc/hotplug2-platform.rules
-
-DEVNAME ~~ (^null$|^full$|^ptmx$|^zero$|^gpio|^hvc) {
-	makedev /dev/%DEVNAME% 0666
-	next-event
-}
-
-DEVNAME == mapper/control {
-	makedev /dev/%DEVNAME% 0600
-	next-event
-}
-
-ACTION == add, DEVPATH is set {
-	makedev /dev/%DEVNAME% 0644
-}
-
-ACTION == add, DEVPATH is set, DEVNAME ~~ ^tty {
-	chmod 0666 /dev/%DEVNAME%
-}
-
-ACTION == add, DEVPATH is set, DEVNAME ~~ ^ppp {
-	chmod 0600 /dev/%DEVNAME%
-}
-
-ACTION == remove, DEVPATH is set, MAJOR is set, MINOR is set {
-	remove /dev/%DEVNAME%
-}
-
-FIRMWARE is set, ACTION == add {
-	exec /sbin/hotplug-call firmware
-	load-firmware /lib/firmware
-	next-event
-}
-
-SUBSYSTEM == platform {
-	exec /sbin/hotplug-call %SUBSYSTEM%
-}

package/base-files/files.old/etc/hotplug2-init.rules

@@ -1,5 +0,0 @@
-$include /etc/hotplug2-common.rules
-
-SUBSYSTEM == button {
-	exec kill -USR1 1
-}

package/base-files/files.old/etc/init.d/boot

@@ -1,110 +0,0 @@
-#!/bin/sh /etc/rc.common
-# Copyright (C) 2006-2011 OpenWrt.org
-
-START=10
-STOP=98
-
-system_config() {
-	local cfg="$1"
-
-	local hostname conloglevel timezone
-
-	config_get hostname "$cfg" hostname 'OpenWrt'
-	echo "$hostname" > /proc/sys/kernel/hostname
-
-	config_get conloglevel "$cfg" conloglevel
-	config_get buffersize "$cfg" buffersize
-	[ -z "$conloglevel" -a -z "$buffersize" ] || dmesg ${conloglevel:+-n $conloglevel} ${buffersize:+-s $buffersize}
-
-	config_get timezone "$cfg" timezone 'UTC'
-	echo "$timezone" > /tmp/TZ
-
-	config_get zonename "$cfg" zonename
-	[ -n "$zonename" ] && [ -f "/usr/share/zoneinfo/$zonename" ] && ln -s "/usr/share/zoneinfo/$zonename" /tmp/localtime
-
-	# apply timezone to kernel
-	date -k
-
-	if [ -x /sbin/syslogd ]; then
-		local args log_ip log_size log_port log_type log_file
-		config_get log_ip "$cfg" log_ip 
-		config_get log_size "$cfg" log_size 16
-		config_get log_port "$cfg" log_port 514
-		config_get log_type "$cfg" log_type circular
-		config_get log_file "$cfg" log_file "/var/log/messages"
-		args="${log_ip:+-L -R ${log_ip}:${log_port}} ${conloglevel:+-l $conloglevel}"
-		if [ "$log_type" = "file" ]; then
-			args="$args -s $log_size -O $log_file -S"
-		else
-			args="$args -C${log_size}"
-		fi
-		service_start /sbin/syslogd $args
-	fi
-	if [ -x /sbin/klogd ]; then
-		config_get klogconloglevel "$cfg" klogconloglevel
-		args="${klogconloglevel:+-c $klogconloglevel}"
-		service_start /sbin/klogd $args
-	fi
-}
-
-apply_uci_config() {
-	sh -c '. /lib/functions.sh; include /lib/config; uci_apply_defaults'
-}
-
-start() {
-	[ -f /proc/mounts ] || /sbin/mount_root
-	[ -f /proc/jffs2_bbc ] && echo "S" > /proc/jffs2_bbc
-	[ -f /proc/net/vlan/config ] && vconfig set_name_type DEV_PLUS_VID_NO_PAD
-
-	mkdir -p /var/run
-	mkdir -p /var/log
-	mkdir -p /var/lock
-	mkdir -p /var/state
-	mkdir -p /tmp/.uci
-	chmod 0700 /tmp/.uci
-	touch /var/log/wtmp
-	touch /var/log/lastlog
-	touch /tmp/resolv.conf.auto
-	ln -sf /tmp/resolv.conf.auto /tmp/resolv.conf
-	grep -q debugfs /proc/filesystems && mount -o noatime -t debugfs debugfs /sys/kernel/debug
-	[ "$FAILSAFE" = "true" ] && touch /tmp/.failsafe
-
-	load_modules /etc/modules.d/*
-
-	# allow wifi modules time to settle
-	sleep 1
-
-	/sbin/wifi detect > /tmp/wireless.tmp
-	[ -s /tmp/wireless.tmp ] && {
-		cat /tmp/wireless.tmp >> /etc/config/wireless
-	}
-	rm -f /tmp/wireless.tmp
-
-	apply_uci_config
-	config_load system
-	config_foreach system_config system
-
-	killall -q hotplug2
-	[ -x /sbin/hotplug2 ] && /sbin/hotplug2 --override --persistent \
-			--set-rules-file /etc/hotplug2.rules \
-			--set-coldplug-cmd /sbin/udevtrigger \
-			--max-children 1 >/dev/null 2>&1 &
-
-	# create /dev/root if it doesn't exist
-	[ -e /dev/root -o -h /dev/root ] || {
-		rootdev=$(awk 'BEGIN { RS=" "; FS="="; } $1 == "root" { print $2 }' < /proc/cmdline)
-		[ -n "$rootdev" ] && ln -s "$rootdev" /dev/root
-	}
-
-	# early sysctl to avoid networking races
-	if [ -d /proc/sys/net/ipv6/conf ]; then
-		for i in /proc/sys/net/ipv6/conf/*/accept_ra; do
-			echo 0 > $i
-		done
-	fi
-}
-
-stop() {
-	service_stop /sbin/klogd
-	service_stop /sbin/syslogd
-}

package/base-files/files.old/etc/init.d/done

@@ -1,20 +0,0 @@
-#!/bin/sh /etc/rc.common
-# Copyright (C) 2006 OpenWrt.org
-
-START=95
-boot() {
-	[ -d /tmp/root ] && {
-		lock /tmp/.switch2jffs
-		firstboot switch2jffs
-		lock -u /tmp/.switch2jffs
-	}
-
-	# process user commands
-	[ -f /etc/rc.local ] && {
-		sh /etc/rc.local
-	}
-
-	# set leds to normal state
-	. /etc/diag.sh
-	set_state done
-}

package/base-files/files.old/etc/init.d/rcS

@@ -1,26 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2006 OpenWrt.org
-
-run_scripts() {
-	for i in /etc/rc.d/$1*; do
-		[ -x $i ] && $i $2 2>&1
-	done | $LOGGER
-}
-
-system_config() {
-	config_get_bool foreground $1 foreground 0
-}
-
-LOGGER="cat"
-[ -x /usr/bin/logger ] && LOGGER="logger -s -p 6 -t sysinit"
-
-. /lib/functions.sh
-
-config_load system
-config_foreach system_config system
-
-if [ "$1" = "S" -a "$foreground" != "1" ]; then
-	run_scripts "$1" "$2" &
-else
-	run_scripts "$1" "$2"
-fi

package/base-files/files.old/etc/init.d/watchdog

@@ -1,13 +0,0 @@
-#!/bin/sh /etc/rc.common
-# Copyright (C) 2008-2011 OpenWrt.org
-
-START=97
-
-start() {
-	[ -c /dev/watchdog ] || return 1
-	[ -x /sbin/watchdog ] || return 1
-	service_start /sbin/watchdog -t 5 /dev/watchdog
-}
-stop() {
-	service_stop /sbin/watchdog
-}

package/base-files/files.old/etc/inittab

@@ -1,4 +0,0 @@
-::sysinit:/etc/init.d/rcS S boot
-::shutdown:/etc/init.d/rcS K shutdown
-ttyS0::askfirst:/bin/ash --login
-tty1::askfirst:/bin/ash --login

package/base-files/files.old/etc/preinit

@@ -1,43 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2006 OpenWrt.org
-# Copyright (C) 2010 Vertical Communications
-
-export PATH=/bin:/sbin:/usr/bin:/usr/sbin
-
-pi_ifname=
-pi_ip=192.168.1.1
-pi_broadcast=192.168.1.255
-pi_netmask=255.255.255.0
-
-fs_failsafe_ifname=
-fs_failsafe_ip=192.168.1.1
-fs_failsafe_broadcast=192.168.1.255
-fs_failsafe_netmask=255.255.255.0
-
-fs_failsafe_wait_timeout=2
-
-pi_suppress_stderr="y"
-pi_init_suppress_stderr="y"
-pi_init_path="/bin:/sbin:/usr/bin:/usr/sbin"
-pi_init_cmd="/sbin/init"
-
-. /lib/functions.sh
-
-boot_hook_init preinit_essential
-boot_hook_init preinit_main
-boot_hook_init failsafe
-boot_hook_init initramfs
-boot_hook_init preinit_mount_root
-
-for pi_source_file in /lib/preinit/*; do
-    . $pi_source_file
-done
-
-boot_run_hook preinit_essential
-
-pi_mount_skip_next=false
-pi_jffs2_mount_success=false
-pi_failsafe_net_message=false
-
-boot_run_hook preinit_main
-

package/base-files/files.old/etc/watchdog

@@ -1,13 +0,0 @@
-#!/bin/sh /etc/rc.common
-# Copyright (C) 2008-2011 OpenWrt.org
-
-START=97
-
-start() {
-	[ -c /dev/watchdog ] || return 1
-	[ -x /sbin/watchdog ] || return 1
-	service_start /sbin/watchdog -t 5 /dev/watchdog
-}
-stop() {
-	service_stop /sbin/watchdog
-}

package/base-files/files.old/init

@@ -1,96 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2006 OpenWrt.org
-
-INITRAMFS=1
-
-. /etc/preinit
-
-set_state init
-echo "- init -"
-
-[ -n "$SWITCH_ROOT_TMPFS" ] && {
-  mount -o noatime none /mnt -t tmpfs
-  ( cd /; find -xdev -type d ) | ( cd /mnt; xargs mkdir -p )
-  find / \! -type d -xdev | tar -cT /proc/self/fd/0 | tar -xC /mnt
-  mkdir /mnt/proc /mnt/dev /mnt/tmp /mnt/sys
-  mount -o noatime,move /proc /mnt/proc
-  mount -o noatime,move /dev /mnt/dev
-  mount -o noatime,move /tmp /mnt/tmp
-  mount -o noatime,move /sys /mnt/sys
-  rm -rf /proc /dev /tmp /sys
-  exec switch_root -c /dev/console /mnt /sbin/init
-}
-
-# if we have no root parameter, just go to running from ramfs
-[ -z $rootfs ] && {
-  export NOMOUNT="No Root"
-  exec /sbin/init
-}
-
-#if we have a failsafe boot selected, dont bother
-#trying to find or wait for a root mount point
-[ -z "$FAILSAFE" ] || {
-  exec /bin/busybox init
-}
-
-# Load the modules we have in initramfs, this should
-# make the media accessible, but, it may take some time
-. /lib/functions.sh
-load_modules /etc/modules /etc/modules.d/*
-
-#wait 10 seconds for the disc to show up
-#usb stick typically takes 4 to 6 seconds
-#till it's readable
-#it's quite possible the disc never shows up
-#if we netbooted this kernel
-COUNTER=0
-while [ $COUNTER -lt 10 ]; do
-  sleep 1
-  [ -e $rootfs ] && let COUNTER=10;
-  let COUNTER=COUNTER+1
-done
-[ -e $rootfs ] || {
-  export FAILSAFE="NoDisc"
-  exec /bin/busybox init
-}
-
-# now we'll try mount it, again with a timeout
-# This will fail if the inserted stick is formatted
-# in a manner we dont understand
-COUNTER=0
-while [ $COUNTER -lt 10 ]; do
-  sleep 1
-  mount -o noatime $rootfs /mnt
-  [ $? -eq "0" ] && let COUNTER=100;
-  let COUNTER=COUNTER+1
-done
-[ $? -ne "0" ] && {
-  export FAILSAFE="MountFail"
-  exec /bin/busybox init
-}
-
-#It mounted, lets look for a postinit file, again, give it time
-#I've seen this take 6 seconds to actually complete
-COUNTER=0
-while [ $COUNTER -lt 10 ]; do
-  sleep 1
-  [ -e /mnt/etc/banner ] && let COUNTER=10;
-  let COUNTER=COUNTER+1
-done
-[ -e /mnt/etc/banner ] || {
-  export FAILSAFE="No Openwrt FS"
-  exec /bin/busybox init
-}
-
-unset rootfs
-
-mount -o noatime,move /proc /mnt/proc
-mount -o noatime,move /dev /mnt/dev
-mount -o noatime,move /dev/pts /mnt/dev/pts
-mount -o noatime,move /tmp /mnt/tmp
-mount -o noatime,move /sys /mnt/sys
-mount -o noatime none /tmp -t tmpfs
-killall -q hotplug2
-exec switch_root -c /dev/console /mnt /sbin/init
-
-set_state done

package/base-files/files.old/lib/firstboot/05_firstboot_skip

@@ -1,10 +0,0 @@
-#!/bin/sh
-
-check_skip() {
-    if [ "$firstboot_skip_next" = "true" ]; then
-	return 0
-    else 
-	return 1
-    fi
-}
-

package/base-files/files.old/lib/firstboot/10_determine_parts

@@ -1,46 +0,0 @@
-#!/bin/sh
-
-set_mtd_part() {
-    partname="rootfs_data"
-    mtdpart="$(find_mtd_part $partname)"
-}
-
-set_rom_part() {
-    rom=$(awk '/squashfs/ {print $2}' /proc/mounts)
-}
-
-set_jffs_part() {
-    jffs=$(awk '/jffs2/ {print $2}' /proc/mounts)
-}
-
-determine_mtd_part() {
-    set_mtd_part
-    if [ -z "$mtdpart" ]; then
-	echo "MTD partition not found."
-	exit 1
-    fi
-}
-
-determine_rom_part() {
-    check_skip || {
-	set_rom_part
-	if [ -z "$rom" ]; then
-	    echo "You do not have a squashfs partition; aborting"
-	    echo "(firstboot cannot be run on jffs2 based firmwares)"
-	    exit 1
-	fi
-    }
-}
-
-determine_jffs2_part() {
-    check_skip || {
-	set_jffs_part
-    }
-}
-
-boot_hook_add switch2jffs determine_mtd_part
-boot_hook_add jffs2reset determine_mtd_part
-boot_hook_add switch2jffs determine_rom_part
-boot_hook_add jffs2reset determine_rom_part
-boot_hook_add switch2jffs determine_jffs2_part
-boot_hook_add jffs2reset determine_jffs2_part

package/base-files/files.old/lib/firstboot/10_no_fo_clear_overlay

@@ -1,17 +0,0 @@
-#!/bin/sh
-
-# Copyright (C) 2006-2010 OpenWrt.org
-# Copyright (C) 2010 Vertical Communications
-
-no_fo_clear_overlay() {
-    # switch back to squashfs temporarily
-    pivot /rom /mnt
-
-    # get rid of the old overlay
-    umount -l /mnt
-
-    # another umount to get rid of the bind from /tmp/root
-    umount -l /mnt
-}
-
-boot_hook_add no_fo no_fo_clear_overlay

package/base-files/files.old/lib/firstboot/10_reset_has_mini_fo

@@ -1,12 +0,0 @@
-#!/bin/sh
-
-# Copyright (C) 2006-2010 OpenWrt.org
-# Copyright (C) 2010 Vertical Communications
-
-reset_check_for_overlay() {
-    if grep -qE '(mini_fo|overlay)' /proc/filesystems; then
-	reset_has_fo=true
-    fi
-}
-
-boot_hook_add jffs2reset reset_check_for_overlay

package/base-files/files.old/lib/firstboot/20_has_mini_fo

@@ -1,13 +0,0 @@
-#!/bin/sh
-
-# Copyright (C) 2006-2010 OpenWrt.org
-# Copyright (C) 2010 Vertical Communications
-
-check_for_overlay() {
-    if ! grep -qE '(mini_fo|overlay)' /proc/filesystems; then
-	boot_run_hook no_fo
-	exit 1
-    fi
-}
-
-boot_hook_add switch2jffs check_for_overlay

package/base-files/files.old/lib/firstboot/20_no_fo_mount_jffs

@@ -1,15 +0,0 @@
-#!/bin/sh
-
-# Copyright (C) 2006-2010 OpenWrt.org
-# Copyright (C) 2010 Vertical Communications
-
-no_fo_mount_jffs() {
-    # initialize jffs2
-    mount -o noatime "$mtdpart" /overlay -t jffs2 || exit
-
-    # workaround to ensure that union can attach properly
-    sync
-    ls /overlay >/dev/null
-}
-
-boot_hook_add no_fo no_fo_mount_jffs

package/base-files/files.old/lib/firstboot/20_reset_clear_jffs

@@ -1,14 +0,0 @@
-#!/bin/sh
-
-# Copyright (C) 2006-2010 OpenWrt.org
-# Copyright (C) 2010 Vertical Communications
-
-reset_clear_jffs() {
-    [ "$reset_has_fo" = "true" ] && {
-	rm -rf $jffs/* 2>&-
-	mount -o remount $jffs / 2>&-
-	exit 0
-    } || reset_has_fo=false
-}
-
-boot_hook_add jffs2reset reset_clear_jffs

package/base-files/files.old/lib/firstboot/30_is_rootfs_mounted

@@ -1,10 +0,0 @@
-#!/bin/sh
-
-# Copyright (C) 2006-2010 OpenWrt.org
-# Copyright (C) 2010 Vertical Communications
-
-skip_if_rootfs_mounted() {
-    mount -o noatime -t jffs2 "$mtdpart" /rom/overlay || exit
-}
-
-boot_hook_add switch2jffs skip_if_rootfs_mounted

package/base-files/files.old/lib/firstboot/30_no_fo_pivot

@@ -1,11 +0,0 @@
-#!/bin/sh
-
-# Copyright (C) 2006-2010 OpenWrt.org
-# Copyright (C) 2010 Vertical Communications
-
-no_fo_pivot() {
-    # switch to the new (empty) jffs2
-    fopivot /overlay /rom 1
-}
-
-boot_hook_add no_fo no_fo_pivot

package/base-files/files.old/lib/firstboot/30_reset_copy_rom

@@ -1,13 +0,0 @@
-#!/bin/sh
-
-# Copyright (C) 2006-2010 OpenWrt.org
-# Copyright (C) 2010 Vertical Communications
-
-reset_copy_rom() {
-    [ "$reset_has_fo" != "true" ] && {
-	dupe $jffs $rom
-	exit 0
-    } 
-}
-
-boot_hook_add jffs2reset reset_copy_rom

package/base-files/files.old/lib/firstboot/40_copy_ramoverlay

@@ -1,15 +0,0 @@
-#!/bin/sh
-
-# Copyright (C) 2006-2010 OpenWrt.org
-# Copyright (C) 2010 Vertical Communications
-
-copy_ramoverlay() {
-    # try to avoid fs changing while copying
-    mount -o remount,ro none / 2>&-
-    # copy ramoverlay to jffs2
-    echo -n "copying files ... "
-    cp -a /tmp/root/* /rom/overlay 2>&-
-    echo "done"
-}
-
-boot_hook_add switch2jffs copy_ramoverlay

package/base-files/files.old/lib/firstboot/40_no_fo_copy_ramoverlay

@@ -1,14 +0,0 @@
-#!/bin/sh
-
-# Copyright (C) 2006-2010 OpenWrt.org
-# Copyright (C) 2010 Vertical Communications
-
-no_fo_copy_ramoverlay() {
-    # copy ramoverlay to jffs2, must be done after switching
-    # to the new rootfs to avoid creating opaque directories
-    echo -n "copying files ... "
-    cp -a /tmp/root/* / >/dev/null 2>&1
-    sync
-}
-
-boot_hook_add no_fo no_fo_ramoverlay

package/base-files/files.old/lib/firstboot/50_pivot

@@ -1,17 +0,0 @@
-#!/bin/sh
-
-# Copyright (C) 2006-2010 OpenWrt.org
-# Copyright (C) 2010 Vertical Communications
-
-with_fo_pivot() {
-    # switch back to squashfs (temporarily)
-    # and park the ramdisk ontop of /tmp/root
-    pivot /rom /mnt
-    mount -o move /mnt /tmp/root
-
-    # /overlay is the overlay
-    # /rom is the readonly
-    fopivot /overlay /rom
-}
-
-boot_hook_add switch2jffs with_fo_pivot

package/base-files/files.old/lib/firstboot/99_10_no_fo_cleanup

@@ -1,13 +0,0 @@
-#!/bin/sh
-
-# Copyright (C) 2006-2010 OpenWrt.org
-# Copyright (C) 2010 Vertical Communications
-
-no_fo_cleanup() {
-    echo "done"
-    umount -l /overlay
-    umount -l /tmp/root
-    exit 0
-}
-
-boot_hook_add no_fo no_fo_cleanup

package/base-files/files.old/lib/firstboot/99_10_with_fo_cleanup

@@ -1,25 +0,0 @@
-#!/bin/sh
-
-# Copyright (C) 2006-2010 OpenWrt.org
-# Copyright (C) 2010 Vertical Communications
-
-with_fo_cleanup() {
-    # try to get rid of /tmp/root
-    # this will almost always fail
-    umount -l /tmp/root 2>&-
-	grep -q overlay /proc/filesystems && {
-		cd /
-		(
-			cd /overlay
-			find -type l
-		) | while read FILE; do
-			[ -z "$FILE" ] && break
-			if ls -la "$FILE" 2>&- | grep -q '(overlay-whiteout)'; then
-				rm -f "$FILE"
-			fi
-		done
-	}
-    exit 0
-}
-
-boot_hook_add switch2jffs with_fo_cleanup

package/base-files/files.old/lib/preinit/05_mount_skip

@@ -1,13 +0,0 @@
-#!/bin/sh
-
-# Copyright (C) 2006 OpenWrt.org
-# Copyright (C) 2010 Vertical Communications
-
-check_skip() {
-    if [ "$pi_mount_skip_next" = "true" ]; then
-	return 0
-    else 
-	return 1
-    fi
-}
-

package/base-files/files.old/lib/preinit/10_check_for_mtd

@@ -1,20 +0,0 @@
-#!/bin/sh
-
-# Copyright (C) 2006-2010 OpenWrt.org
-# Copyright (C) 2010 Vertical Communications
-
-mount_no_mtd() {
-    mtd unlock rootfs
-    mount -o noatime,remount,rw /dev/root /
-}
-
-check_for_mtd() {
-    check_skip || {
-	grep -qs rootfs_data /proc/mtd || {
-	    mount_no_mtd && pi_mount_skip_next=true
-	}
-    }
-}
-
-boot_hook_add preinit_mount_root check_for_mtd
-

package/base-files/files.old/lib/preinit/10_essential_fs

@@ -1,25 +0,0 @@
-#!/bin/sh 
-# Copyright (C) 2006 OpenWrt.org
-# Copyright (C) 2010 Vertical Communications
-
-do_mount_procfs() {
-   mount -o noatime -t proc proc /proc
-}
-
-do_mount_sysfs() {
-   mount -o noatime -tsysfs sysfs /sys
-}
-
-calc_tmpfs_size() {
-    pi_size=$(awk '/MemTotal:/ {l=5242880;mt=($2*1024);print((s=mt/2)<l)&&(mt>l)?mt-l:s}' /proc/meminfo)
-}
-
-do_mount_tmpfs() {
-    calc_tmpfs_size
-    mount -o noatime -t tmpfs -o size=$pi_size,nosuid,nodev,mode=1777 tmpfs /tmp
-}
-
-boot_hook_add preinit_essential do_mount_procfs
-boot_hook_add preinit_essential do_mount_sysfs
-boot_hook_add preinit_essential do_mount_tmpfs
-

package/base-files/files.old/lib/preinit/10_indicate_preinit

@@ -1,51 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2006 OpenWrt.org
-# Copyright (C) 2010 Vertical Communications
-
-preinit_ip() {
-    # if the preinit interface isn't specified and ifname is set in 
-    # preinit.arch use that interface
-    if [ -z "$pi_ifname" ]; then
-	pi_ifname=$ifname    
-    fi
-
-    [ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && {
-	ifconfig $pi_ifname $pi_ip netmask $pi_netmask broadcast $pi_broadcast up
-    }
-}
-
-preinit_ip_deconfig() {
-    [ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && {
-	ifconfig $pi_ifname 0.0.0.0 down
-    }
-}
-
-preinit_net_echo() {
-	[ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && {
-		{ 
-			[ "$pi_preinit_net_messages" = "y" ] || {
-    		     		[ "$pi_failsafe_net_message"  = "true" ] && 
-    		         	    [ "$pi_preinit_no_failsafe_netmsg" != "y" ] 
-    		         }
-		} && netmsg $pi_broadcast "$1"
-    	}
-}
-
-preinit_echo() {
-    preinit_net_echo $1
-    echo $1
-}
-
-pi_indicate_led() {
-    set_state preinit
-}
-
-pi_indicate_preinit() {
-    echo "- preinit -"
-    preinit_net_echo "Doing OpenWRT Preinit\n"
-    pi_indicate_led
-}
-
-boot_hook_add preinit_main preinit_ip
-boot_hook_add preinit_main pi_indicate_preinit
-

package/base-files/files.old/lib/preinit/20_check_jffs2_ready

@@ -1,19 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2006-2010 OpenWrt.org
-# Copyright (C) 2010 Vertical Communications
-
-mount_no_jffs2() {
-    echo "jffs2 not ready yet; using ramdisk"
-    ramoverlay
-}
-
-check_for_jffs2() {
-    check_skip || {
-	jffs2_ready || {
-	    mount_no_jffs2 && pi_mount_skip_next=true
-	}
-    }
-}
-
-boot_hook_add preinit_mount_root check_for_jffs2
-

package/base-files/files.old/lib/preinit/20_device_fs_mount

@@ -1,37 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2006 OpenWrt.org
-# Copyright (C) 2010 Vertical Communications
-
-do_move_devtmpfs() {
-    local mnt="$(grep devtmpfs /proc/mounts)"
-          mnt="${mnt#* }"; mnt="${mnt%% *}"
-
-    [ "$mnt" = "/dev" ] || mount -o noatime,move "$mnt" /dev
-}
-
-do_mount_devfs() {
-    mount -o noatime -t devfs devfs /dev
-}
-
-do_mount_hotplug() {
-    mount -t tmpfs -o noatime,mode=0755,size=512K tmpfs /dev
-}
-
-do_mount_udev() {
-    mount -n -t tmpfs -o noatime,mode=0755 udev /dev
-}
-
-choose_device_fs() {
-    if grep -q devtmpfs /proc/mounts; then
-    	do_move_devtmpfs
-    elif grep -q devfs /proc/filesystems; then
-        do_mount_devfs
-    elif [ -x /sbin/hotplug2 ]; then
-        do_mount_hotplug
-    elif [ -x /sbin/udevd ]; then
-        do_mount_udev
-    fi
-}
-
-boot_hook_add preinit_essential choose_device_fs
-

package/base-files/files.old/lib/preinit/30_device_fs_daemons

@@ -1,36 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2006-2013 OpenWrt.org
-# Copyright (C) 2010 Vertical Communications
-
-init_devfs() {
-    HOTPLUG=/sbin/hotplug-call
-}
-
-init_hotplug2() {
-    [ -c /dev/console ] || mknod /dev/console c 5 1
-    /sbin/hotplug2 --set-rules-file /etc/hotplug2-init.rules --no-persistent --set-coldplug-cmd /sbin/udevtrigger
-    /sbin/hotplug2 --set-rules-file /etc/hotplug2-init.rules --persistent &
-}
-
-init_udev() {
-    [ -d /lib/udev/devices ] && cp -af /lib/udev/devices/* /dev/
-    [ -c /dev/console ] || mknod -m 0600 /dev/console c 5 1
-    [ -c /dev/null ] || mknod -m 0666 /dev/null c 1 3
-    /sbin/udevd --daemon --resolve-names=never
-    /sbin/udevadm trigger
-    /sbin/udevadm settle    
-}
-
-init_device_fs() {
-    HOTPLUG=
-    if grep -q devfs /proc/filesystems; then
-	init_devfs
-    elif [ -x /sbin/hotplug2 ]; then
-	init_hotplug2
-    elif [ -x /sbin/udevd ]; then
-	init_udev
-    fi
-}
-
-boot_hook_add preinit_essential init_device_fs
-

package/base-files/files.old/lib/preinit/40_init_shm

@@ -1,10 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2006 OpenWrt.org
-# Copyright (C) 2010 Vertical Communications
-
-init_shm() {
-    [ -d /dev/shm ] || mkdir -p /dev/shm
-}
-
-boot_hook_add preinit_essential init_shm
-

package/base-files/files.old/lib/preinit/40_mount_devpts

@@ -1,15 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2006 OpenWrt.org
-# Copyright (C) 2010 Vertical Communications
-
-init_devpts() {
-    [ -d /dev/pts ] || mkdir -p /dev/pts
-}
-
-do_mount_devpts() {
-    mount -o noatime -t devpts devpts /dev/pts
-}
-
-boot_hook_add preinit_essential init_devpts
-boot_hook_add preinit_essential do_mount_devpts
-

package/base-files/files.old/lib/preinit/40_mount_jffs2

@@ -1,26 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2006-2010 OpenWrt.org
-# Copyright (C) 2010 Vertical Communications
-
-find_mount_jffs2() {
-    mkdir -p /tmp/overlay
-    mount -o noatime -t jffs2 "$(find_mtd_part rootfs_data)" /tmp/overlay
-    mtd -qq unlock rootfs_data
-}
-
-jffs2_not_mounted() {
-    if [ "$pi_jffs2_mount_success" != "true" ]; then
-	return 0
-    else
-	return 1
-    fi
-}
-
-do_mount_jffs2() {
-    check_skip || {
-	find_mount_jffs2 && pi_jffs2_mount_success=true
-    }
-}
-
-boot_hook_add preinit_mount_root do_mount_jffs2
-

package/base-files/files.old/lib/preinit/41_merge_overlay_hooks

@@ -1,24 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2010 OpenWrt.org
-
-merge_overlay_hooks() {
-	jffs2_not_mounted || [ ! -d /tmp/overlay/lib/preinit ] || {
-		echo "- merge overlay components -"
-
-		mkdir -p /tmp/preinit-hook-merge
-		ln -sf /lib/preinit/* /tmp/overlay/lib/preinit/[0-9][0-9]_* /tmp/preinit-hook-merge/
-
-		boot_hook_splice_start
-
-		local pipart
-		for pipart in /tmp/preinit-hook-merge/*; do
-			. $pipart
-		done
-
-		boot_hook_splice_finish
-
-		rm -rf /tmp/preinit-hook-merge
-	}
-}
-
-boot_hook_add preinit_mount_root merge_overlay_hooks

package/base-files/files.old/lib/preinit/50_choose_console

@@ -1,31 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2006-2010 OpenWrt.org
-# Copyright (C) 2010 Vertical Communications
-
-choose_console() {
-    # the shell really doesn't like having stdin/out closed
-    # that's why we use /dev/pty/m0 and m1 (or equivalent) as replacement
-    # for /dev/console if there's no serial console available
-
-    if grep -q devfs /proc/filesystems; then
-	M0=/dev/pty/m0
-	M1=/dev/pty/m1
-	M2=/dev/pty/m1
-    elif [ -x /sbin/hotplug2 ]; then
-	M0=/dev/ptmx
-	M1=/dev/ptmx
-	M2=/dev/ptmx
-    elif [ -x /sbin/udevd ]; then
-	M0=/dev/pty/ptmx
-	M1=/dev/pty/ptmx
-	M2=/dev/pty/ptmx
-    fi
-    dd if=/dev/console of=/dev/null bs=1 count=0 >/dev/null 2>/dev/null && {
-	M0=/dev/console
-	M1=/dev/console
-	M2=/dev/console    
-    }
-}
-
-boot_hook_add preinit_essential choose_console
-

package/base-files/files.old/lib/preinit/50_indicate_regular_preinit

@@ -1,12 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2006 OpenWrt.org
-# Copyright (C) 2010 Vertical Communications
-
-indicate_regular_preinit() {
-    echo "- regular preinit -"
-    preinit_net_echo "Continuing with Regular Preinit\n"
-    pi_indicate_led
-}
-
-boot_hook_add preinit_main indicate_regular_preinit
-

package/base-files/files.old/lib/preinit/60_init_hotplug

@@ -1,10 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2006 OpenWrt.org
-# Copyright (C) 2010 Vertical Communications
-
-init_hotplug() {
-   echo "$HOTPLUG" > /proc/sys/kernel/hotplug
-}
-
-boot_hook_add preinit_main init_hotplug
-

package/base-files/files.old/lib/preinit/70_pivot_jffs2_root

@@ -1,14 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2006-2010 OpenWrt.org
-# Copyright (C) 2010 Vertical Communications
-
-rootfs_pivot() {
-    check_skip || jffs2_not_mounted || {
-	echo "switching to jffs2"
-	mount -o noatime,move /tmp/overlay /overlay 2>&-
-	fopivot /overlay /rom && pi_mount_skip_next=true
-    }
-}
-
-boot_hook_add preinit_mount_root rootfs_pivot
-

package/base-files/files.old/lib/preinit/80_mount_root

@@ -1,10 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2006 OpenWrt.org
-# Copyright (C) 2010 Vertical Communications
-
-do_mount_root() {
-    boot_run_hook preinit_mount_root
-}
-
-boot_hook_add preinit_main do_mount_root
-

package/base-files/files.old/lib/preinit/90_init_console

@@ -1,14 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2006-2010 OpenWrt.org
-# Copyright (C) 2010 Vertical Communications
-
-init_console() {
-    if [ "$pi_suppress_stderr" = "y" ]; then
-	exec <$M0 >$M1 2>&0
-    else 
-	exec <$M0 >$M1 2>$M2
-    fi
-}
-
-boot_hook_add preinit_essential init_console
-

package/base-files/files.old/lib/preinit/90_mount_no_jffs2

@@ -1,12 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2006-2010 OpenWrt.org
-# Copyright (C) 2010 Vertical Communications
-
-do_mount_no_jffs2() {
-    check_skip || {
-	mount_no_jffs2 && pi_mount_skip_next=true
-    }
-}
-
-boot_hook_add preinit_mount_root do_mount_no_jffs2
-

package/base-files/files.old/lib/preinit/90_restore_config

@@ -1,17 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2006 OpenWrt.org
-# Copyright (C) 2010 Vertical Communications
-
-restore_config() {
-    [ -f /sysupgrade.tgz ] && {
-	echo "- config restore -"
-	cd /
-	mv sysupgrade.tgz /tmp
-	tar xzf /tmp/sysupgrade.tgz
-	rm -f /tmp/sysupgrade.tgz
-	sync
-    }
-}
-
-boot_hook_add preinit_main restore_config
-

package/base-files/files.old/lib/preinit/99_10_mount_no_mtd

@@ -1,12 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2006-2010 OpenWrt.org
-# Copyright (C) 2010 Vertical Communications
-
-do_mount_no_mtd() {
-    check_skip || {
-	mount_no_mtd
-    }
-}
-
-boot_hook_add preinit_mount_root do_mount_no_mtd
-

package/base-files/files.old/lib/preinit/99_10_run_init

@@ -1,16 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2006 OpenWrt.org
-# Copyright (C) 2010 Vertical Communications
-
-run_init() {
-    preinit_echo "- init -"
-    preinit_ip_deconfig
-    if [ "$pi_init_suppress_stderr" = "y" ]; then
-	exec env - PATH=$pi_init_path $pi_init_env $pi_init_cmd 2>&0
-    else
-	exec env - PATH=$pi_init_path $pi_init_env $pi_init_cmd
-    fi
-}
-
-boot_hook_add preinit_main run_init
-

package/base-files/files.old/lib/upgrade/common.sh

@@ -1,230 +0,0 @@
-#!/bin/sh
-
-RAM_ROOT=/tmp/root
-
-ldd() { LD_TRACE_LOADED_OBJECTS=1 $*; }
-libs() { ldd $* | awk '{print $3}'; }
-
-install_file() { # <file> [ <file> ... ]
-	for file in "$@"; do
-		dest="$RAM_ROOT/$file"
-		[ -f $file -a ! -f $dest ] && {
-			dir="$(dirname $dest)"
-			mkdir -p "$dir"
-			cp $file $dest
-		}
-	done
-}
-
-install_bin() { # <file> [ <symlink> ... ]
-	src=$1
-	files=$1
-	[ -x "$src" ] && files="$src $(libs $src)"
-	install_file $files
-	[ -e /lib/ld.so.1 ] && {
-		install_file /lib/ld.so.1
-	}
-	shift
-	for link in "$@"; do {
-		dest="$RAM_ROOT/$link"
-		dir="$(dirname $dest)"
-		mkdir -p "$dir"
-		[ -f "$dest" ] || ln -s $src $dest
-	}; done
-}
-
-supivot() { # <new_root> <old_root>
-	mount | grep "on $1 type" 2>&- 1>&- || mount -o bind $1 $1
-	mkdir -p $1$2 $1/proc $1/sys $1/dev $1/tmp $1/overlay && \
-	mount -o noatime,move /proc $1/proc && \
-	pivot_root $1 $1$2 || {
-        umount $1 $1
-		return 1
-	}
-
-	mount -o noatime,move $2/sys /sys
-	mount -o noatime,move $2/dev /dev
-	mount -o noatime,move $2/tmp /tmp
-	mount -o noatime,move $2/overlay /overlay 2>&-
-	return 0
-}
-
-run_ramfs() { # <command> [...]
-	install_bin /bin/busybox /bin/ash /bin/sh /bin/mount /bin/umount        \
-		/sbin/pivot_root /usr/bin/wget /sbin/reboot /bin/sync /bin/dd   \
-		/bin/grep /bin/cp /bin/mv /bin/tar /usr/bin/md5sum "/usr/bin/[" \
-		/bin/vi /bin/ls /bin/cat /usr/bin/awk /usr/bin/hexdump          \
-		/bin/sleep /bin/zcat /usr/bin/bzcat /usr/bin/printf /usr/bin/wc
-
-	install_bin /sbin/mtd
-	for file in $RAMFS_COPY_BIN; do
-		install_bin $file
-	done
-	install_file /etc/resolv.conf /lib/functions.sh /lib/functions.sh /lib/upgrade/*.sh $RAMFS_COPY_DATA
-
-	supivot $RAM_ROOT /mnt || {
-		echo "Failed to switch over to ramfs. Please reboot."
-		exit 1
-	}
-
-	mount -o remount,ro /mnt
-	umount -l /mnt
-
-	grep /overlay /proc/mounts > /dev/null && {
-		mount -o noatime,remount,ro /overlay
-		umount -l /overlay
-	}
-
-	# spawn a new shell from ramdisk to reduce the probability of cache issues
-	exec /bin/busybox ash -c "$*"
-}
-
-kill_remaining() { # [ <signal> ]
-	local sig="${1:-TERM}"
-	echo -n "Sending $sig to remaining processes ... "
-
-	local stat
-	for stat in /proc/[0-9]*/stat; do
-		[ -f "$stat" ] || continue
-
-		local pid name state ppid rest
-		read pid name state ppid rest < $stat
-		name="${name#(}"; name="${name%)}"
-
-		local cmdline
-		read cmdline < /proc/$pid/cmdline
-
-		# Skip kernel threads 
-		[ -n "$cmdline" ] || continue
-
-		case "$name" in
-			# Skip essential services
-			*ash*|*init*|*watchdog*|*ssh*|*dropbear*|*telnet*|*login*|*hostapd*|*wpa_supplicant*) : ;;
-
-			# Killable process
-			*)
-				if [ $pid -ne $$ ] && [ $ppid -ne $$ ]; then
-					echo -n "$name "
-					kill -$sig $pid 2>/dev/null
-				fi
-			;;
-		esac
-	done
-	echo ""
-}
-
-run_hooks() {
-	local arg="$1"; shift
-	for func in "$@"; do
-		eval "$func $arg"
-	done
-}
-
-ask_bool() {
-	local default="$1"; shift;
-	local answer="$default"
-
-	[ "$INTERACTIVE" -eq 1 ] && {
-		case "$default" in
-			0) echo -n "$* (y/N): ";;
-			*) echo -n "$* (Y/n): ";;
-		esac
-		read answer
-		case "$answer" in
-			y*) answer=1;;
-			n*) answer=0;;
-			*) answer="$default";;
-		esac
-	}
-	[ "$answer" -gt 0 ]
-}
-
-v() {
-	[ "$VERBOSE" -ge 1 ] && echo "$@"
-}
-
-rootfs_type() {
-	mount | awk '($3 ~ /^\/$/) && ($5 !~ /rootfs/) { print $5 }'
-}
-
-get_image() { # <source> [ <command> ]
-	local from="$1"
-	local conc="$2"
-	local cmd
-
-	case "$from" in
-		http://*|ftp://*) cmd="wget -O- -q";;
-		*) cmd="cat";;
-	esac
-	if [ -z "$conc" ]; then
-		local magic="$(eval $cmd $from | dd bs=2 count=1 2>/dev/null | hexdump -n 2 -e '1/1 "%02x"')"
-		case "$magic" in
-			1f8b) conc="zcat";;
-			425a) conc="bzcat";;
-		esac
-	fi
-
-	eval "$cmd $from ${conc:+| $conc}"
-}
-
-get_magic_word() {
-	get_image "$@" | dd bs=2 count=1 2>/dev/null | hexdump -v -n 2 -e '1/1 "%02x"'
-}
-
-get_magic_long() {
-	get_image "$@" | dd bs=4 count=1 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
-}
-
-refresh_mtd_partitions() {
-	mtd refresh rootfs
-}
-
-jffs2_copy_config() {
-	if grep rootfs_data /proc/mtd >/dev/null; then
-		# squashfs+jffs2
-		mtd -e rootfs_data jffs2write "$CONF_TAR" rootfs_data
-	else
-		# jffs2
-		mtd jffs2write "$CONF_TAR" rootfs
-	fi
-}
-
-default_do_upgrade() {
-	sync
-	if [ "$SAVE_CONFIG" -eq 1 -a -z "$USE_REFRESH" ]; then
-		get_image "$1" | mtd -j "$CONF_TAR" write - "${PART_NAME:-image}"
-	else
-		get_image "$1" | mtd write - "${PART_NAME:-image}"
-	fi
-}
-
-do_upgrade() {
-	v "Performing system upgrade..."
-	if type 'platform_do_upgrade' >/dev/null 2>/dev/null; then
-		platform_do_upgrade "$ARGV"
-	else
-		default_do_upgrade "$ARGV"
-	fi
-
-	[ "$SAVE_CONFIG" -eq 1 -a -n "$USE_REFRESH" ] && {
-		v "Refreshing partitions"
-		if type 'platform_refresh_partitions' >/dev/null 2>/dev/null; then
-			platform_refresh_partitions
-		else
-			refresh_mtd_partitions
-		fi
-		if type 'platform_copy_config' >/dev/null 2>/dev/null; then
-			platform_copy_config
-		else
-			jffs2_copy_config
-		fi
-	}
-	v "Upgrade completed"
-	[ -n "$DELAY" ] && sleep "$DELAY"
-	ask_bool 1 "Reboot" && {
-		v "Rebooting system..."
-		reboot -f
-		sleep 5
-		echo b 2>/dev/null >/proc/sysrq-trigger
-	}
-}

package/base-files/files.old/sbin/firstboot

@@ -1,44 +0,0 @@
-#!/bin/sh
-
-switch2jffs_hook=
-jffs2reset_hook=
-no_fo_hook=
-
-. /lib/functions.sh
-
-firstboot_skip_next=false
-
-for fb_source_file in /lib/firstboot/*; do
-    . $fb_source_file
-done
-
-set_mtd_part
-set_rom_part
-set_jffs_part
-
-# invoked as an executable
-if [ "${0##*/}" = "firstboot" ]; then
-    if [ "$1" = "switch2jffs" ]; then
-	boot_run_hook switch2jffs
-    else
-	if [ -t 0 ] && [ "$1" != "-y" ]; then
-		local input
-
-		echo -n "firstboot will erase all settings and remove any installed packages. Are you sure? [N/y]"
-		read input
-		[ "$input" = "y" ] || [ "$input" = "Y" ] || return 0
-	fi
-
-	if [ -n "$jffs" ]; then
-	    reset_has_fo=true
-	    echo "firstboot has already been run"
-	    echo "jffs2 partition is mounted, only resetting files"
-	    boot_run_hook jffs2reset
-	else
-	    mtd erase "$partname"
-	    mount -o noatime "$mtdpart" /overlay -t jffs2
-	    fopivot /overlay /rom 1
-	fi
-    fi
-fi
-

package/base-files/files.old/sbin/mount_root

@@ -1,26 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2006-2010 OpenWrt.org
-# Copyright (C) 2010 Vertical Communications
-
-# Initialize hook variables et by pulling in from preinit
-
-preinit_essential_hook=
-preinit_main_hook=
-failsafe_hook=
-initramfs_hook=
-preinit_mount_root=
-
-. /lib/functions.sh
-
-for pi_source_file in /lib/preinit/*; do
-    . $pi_source_file
-done
-
-# Override function that doesn't apply to use of mount_root as a command rather
-# than as part of preinit
-
-preinit_echo() {
-    echo "$@"
-}
-
-boot_run_hook preinit_mount_root