realtek: refresh patches in 5.15

Adjust patches for kernel 5.15.

Signed-off-by: INAGAKI Hiroshi <[email protected]>

target/linux/realtek/patches-5.15/008-5.17-watchdog-add-realtek-otto-watchdog-timer.patch

@@ -32,7 +32,7 @@ Signed-off-by: Guenter Roeck <[email protected]>
 
 --- a/MAINTAINERS
 +++ b/MAINTAINERS
-@@ -14816,6 +14816,13 @@ S:	Maintained
+@@ -15887,6 +15887,13 @@ S:	Maintained
  F:	include/sound/rt*.h
  F:	sound/soc/codecs/rt*
  
@@ -48,7 +48,7 @@ Signed-off-by: Guenter Roeck <[email protected]>
  S:	Maintained
 --- a/drivers/watchdog/Kconfig
 +++ b/drivers/watchdog/Kconfig
-@@ -995,6 +995,19 @@ config RTD119X_WATCHDOG
+@@ -954,6 +954,19 @@ config RTD119X_WATCHDOG
  	  Say Y here to include support for the watchdog timer in
  	  Realtek RTD1295 SoCs.
  
@@ -70,7 +70,7 @@ Signed-off-by: Guenter Roeck <[email protected]>
  	depends on ARCH_SPRD || COMPILE_TEST
 --- a/drivers/watchdog/Makefile
 +++ b/drivers/watchdog/Makefile
-@@ -174,6 +174,7 @@ obj-$(CONFIG_IMGPDC_WDT) += imgpdc_wdt.o
+@@ -171,6 +171,7 @@ obj-$(CONFIG_IMGPDC_WDT) += imgpdc_wdt.o
  obj-$(CONFIG_MT7621_WDT) += mt7621_wdt.o
  obj-$(CONFIG_PIC32_WDT) += pic32-wdt.o
  obj-$(CONFIG_PIC32_DMT) += pic32-dmt.o

target/linux/realtek/patches-5.15/020-v5.17-net-mdio-add-helpers-to-extract-clause-45-regad-and-.patch

@@ -34,7 +34,7 @@ Signed-off-by: David S. Miller <[email protected]>
  #define MII_REGADDR_C45_MASK	GENMASK(15, 0)
  
  struct gpio_desc;
-@@ -342,6 +344,16 @@ static inline u32 mdiobus_c45_addr(int d
+@@ -355,6 +357,16 @@ static inline u32 mdiobus_c45_addr(int d
  	return MII_ADDR_C45 | devad << MII_DEVADDR_C45_SHIFT | regnum;
  }
  

target/linux/realtek/patches-5.15/021-v5.19-02-gpio-realtek-otto-Support-reversed-port-layouts.patch

@@ -91,7 +91,7 @@ Signed-off-by: Bartosz Golaszewski <[email protected]>
  }
  
  /* Set the rising and falling edge mask bits for a GPIO port pin */
-@@ -253,6 +289,7 @@ MODULE_DEVICE_TABLE(of, realtek_gpio_of_
+@@ -250,6 +286,7 @@ MODULE_DEVICE_TABLE(of, realtek_gpio_of_
  static int realtek_gpio_probe(struct platform_device *pdev)
  {
  	struct device *dev = &pdev->dev;
@@ -99,7 +99,7 @@ Signed-off-by: Bartosz Golaszewski <[email protected]>
  	unsigned int dev_flags;
  	struct gpio_irq_chip *girq;
  	struct realtek_gpio_ctrl *ctrl;
-@@ -280,10 +317,20 @@ static int realtek_gpio_probe(struct pla
+@@ -277,10 +314,20 @@ static int realtek_gpio_probe(struct pla
  
  	raw_spin_lock_init(&ctrl->lock);
  

target/linux/realtek/patches-5.15/021-v5.19-03-gpio-realtek-otto-Support-per-cpu-interrupts.patch

@@ -47,7 +47,7 @@ Signed-off-by: Bartosz Golaszewski <[email protected]>
  };
  
  static struct realtek_gpio_ctrl *irq_data_to_ctrl(struct irq_data *data)
-@@ -250,14 +258,61 @@ static void realtek_gpio_irq_handler(str
+@@ -247,14 +255,61 @@ static void realtek_gpio_irq_handler(str
  	chained_irq_exit(irq_chip, desc);
  }
  
@@ -109,7 +109,7 @@ Signed-off-by: Bartosz Golaszewski <[email protected]>
  	}
  
  	return 0;
-@@ -269,6 +324,7 @@ static struct irq_chip realtek_gpio_irq_
+@@ -266,6 +321,7 @@ static struct irq_chip realtek_gpio_irq_
  	.irq_mask = realtek_gpio_irq_mask,
  	.irq_unmask = realtek_gpio_irq_unmask,
  	.irq_set_type = realtek_gpio_irq_set_type,
@@ -117,7 +117,7 @@ Signed-off-by: Bartosz Golaszewski <[email protected]>
  };
  
  static const struct of_device_id realtek_gpio_of_match[] = {
-@@ -293,8 +349,10 @@ static int realtek_gpio_probe(struct pla
+@@ -290,8 +346,10 @@ static int realtek_gpio_probe(struct pla
  	unsigned int dev_flags;
  	struct gpio_irq_chip *girq;
  	struct realtek_gpio_ctrl *ctrl;
@@ -129,7 +129,7 @@ Signed-off-by: Bartosz Golaszewski <[email protected]>
  
  	ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
  	if (!ctrl)
-@@ -355,6 +413,21 @@ static int realtek_gpio_probe(struct pla
+@@ -352,6 +410,21 @@ static int realtek_gpio_probe(struct pla
  		girq->init_hw = realtek_gpio_irq_init;
  	}
  

target/linux/realtek/patches-5.15/021-v5.19-04-gpio-realtek-otto-Add-RTL930x-support.patch

@@ -16,7 +16,7 @@ Signed-off-by: Bartosz Golaszewski <[email protected]>
 
 --- a/drivers/gpio/gpio-realtek-otto.c
 +++ b/drivers/gpio/gpio-realtek-otto.c
-@@ -338,6 +338,10 @@ static const struct of_device_id realtek
+@@ -335,6 +335,10 @@ static const struct of_device_id realtek
  	{
  		.compatible = "realtek,rtl8390-gpio",
  	},

target/linux/realtek/patches-5.15/021-v5.19-06-gpio-realtek-otto-Add-RTL931x-support.patch

@@ -18,7 +18,7 @@ Signed-off-by: Bartosz Golaszewski <[email protected]>
 
 --- a/drivers/gpio/gpio-realtek-otto.c
 +++ b/drivers/gpio/gpio-realtek-otto.c
-@@ -342,6 +342,9 @@ static const struct of_device_id realtek
+@@ -339,6 +339,9 @@ static const struct of_device_id realtek
  		.compatible = "realtek,rtl9300-gpio",
  		.data = (void *)(GPIO_PORTS_REVERSED | GPIO_INTERRUPTS_PER_CPU)
  	},

target/linux/realtek/patches-5.15/300-mips-add-rtl838x-platform.patch

@@ -15,8 +15,8 @@ Submitted-by: Birger Koblitz <[email protected]>
 
 --- a/arch/mips/Kbuild.platforms
 +++ b/arch/mips/Kbuild.platforms
-@@ -23,6 +23,7 @@ platform-$(CONFIG_PIC32MZDA)		+= pic32/
- platform-$(CONFIG_MACH_PISTACHIO)	+= pistachio/
+@@ -23,6 +23,7 @@ platform-$(CONFIG_NLM_COMMON)		+= netlog
+ platform-$(CONFIG_PIC32MZDA)		+= pic32/
  platform-$(CONFIG_RALINK)		+= ralink/
  platform-$(CONFIG_MIKROTIK_RB532)	+= rb532/
 +platform-$(CONFIG_RTL83XX)		+= rtl838x/
@@ -25,7 +25,7 @@ Submitted-by: Birger Koblitz <[email protected]>
  platform-$(CONFIG_SGI_IP28)		+= sgi-ip22/
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
-@@ -1037,8 +1037,58 @@ config NLM_XLP_BOARD
+@@ -1053,8 +1053,58 @@ config NLM_XLP_BOARD
  	  This board is based on Netlogic XLP Processor.
  	  Say Y here if you have a XLP based board.
  
@@ -84,7 +84,7 @@ Submitted-by: Birger Koblitz <[email protected]>
  source "arch/mips/alchemy/Kconfig"
  source "arch/mips/ath25/Kconfig"
  source "arch/mips/ath79/Kconfig"
-@@ -1097,6 +1147,9 @@ config CEVT_GT641XX
+@@ -1112,6 +1162,9 @@ config CEVT_GT641XX
  config CEVT_R4K
  	bool
  

target/linux/realtek/patches-5.15/301-gpio-add-rtl8231-driver.patch

@@ -25,9 +25,9 @@ Submitted-by: John Crispin <[email protected]>
 
 --- a/drivers/gpio/Kconfig
 +++ b/drivers/gpio/Kconfig
-@@ -508,6 +508,12 @@ config GPIO_REG
- 	  A 32-bit single register GPIO fixed in/out implementation.  This
- 	  can be used to represent any register as a set of GPIO signals.
+@@ -529,6 +529,12 @@ config GPIO_ROCKCHIP
+ 	help
+ 	  Say yes here to support GPIO on Rockchip SoCs.
  
 +config GPIO_RTL8231
 +	tristate "RTL8231 GPIO"
@@ -40,10 +40,10 @@ Submitted-by: John Crispin <[email protected]>
  	depends on MFD_SYSCON
 --- a/drivers/gpio/Makefile
 +++ b/drivers/gpio/Makefile
-@@ -127,6 +127,7 @@ obj-$(CONFIG_GPIO_RDA)			+= gpio-rda.o
- obj-$(CONFIG_GPIO_RDC321X)		+= gpio-rdc321x.o
+@@ -129,6 +129,7 @@ obj-$(CONFIG_GPIO_RDC321X)		+= gpio-rdc3
  obj-$(CONFIG_GPIO_REALTEK_OTTO)		+= gpio-realtek-otto.o
  obj-$(CONFIG_GPIO_REG)			+= gpio-reg.o
+ obj-$(CONFIG_GPIO_ROCKCHIP)	+= gpio-rockchip.o
 +obj-$(CONFIG_GPIO_RTL8231)		+= gpio-rtl8231.o
  obj-$(CONFIG_ARCH_SA1100)		+= gpio-sa1100.o
  obj-$(CONFIG_GPIO_SAMA5D2_PIOBU)	+= gpio-sama5d2-piobu.o

target/linux/realtek/patches-5.15/302-clocksource-add-otto-driver.patch

@@ -20,7 +20,7 @@
  	depends on HAS_IOMEM
 --- a/drivers/clocksource/Makefile
 +++ b/drivers/clocksource/Makefile
-@@ -63,6 +63,7 @@ obj-$(CONFIG_MILBEAUT_TIMER)	+= timer-mi
+@@ -58,6 +58,7 @@ obj-$(CONFIG_MILBEAUT_TIMER)	+= timer-mi
  obj-$(CONFIG_SPRD_TIMER)	+= timer-sprd.o
  obj-$(CONFIG_NPCM7XX_TIMER)	+= timer-npcm7xx.o
  obj-$(CONFIG_RDA_TIMER)		+= timer-rda.o
@@ -30,7 +30,7 @@
  obj-$(CONFIG_ARM_ARCH_TIMER)		+= arm_arch_timer.o
 --- a/include/linux/cpuhotplug.h
 +++ b/include/linux/cpuhotplug.h
-@@ -133,6 +133,7 @@ enum cpuhp_state {
+@@ -177,6 +177,7 @@ enum cpuhp_state {
  	CPUHP_AP_MARCO_TIMER_STARTING,
  	CPUHP_AP_MIPS_GIC_TIMER_STARTING,
  	CPUHP_AP_ARC_TIMER_STARTING,

target/linux/realtek/patches-5.15/303-gpio-update-dependencies-for-gpio-realtek-otto.patch

@@ -13,7 +13,7 @@ Submitted-by: INAGAKI Hiroshi <[email protected]>
  1 file changed, 2 insertions(+), 2 deletions(-)
 --- a/drivers/gpio/Kconfig
 +++ b/drivers/gpio/Kconfig
-@@ -491,8 +491,8 @@ config GPIO_RDA
+@@ -503,8 +503,8 @@ config GPIO_RDA
  
  config GPIO_REALTEK_OTTO
  	tristate "Realtek Otto GPIO support"

target/linux/realtek/patches-5.15/304-spi-update-dependency-for-spi-realtek-rtl.patch

@@ -14,9 +14,9 @@ Submitted-by: INAGAKI Hiroshi <[email protected]>
 
 --- a/drivers/spi/Makefile
 +++ b/drivers/spi/Makefile
-@@ -94,7 +94,7 @@ obj-$(CONFIG_SPI_QCOM_QSPI)		+= spi-qcom
- obj-$(CONFIG_SPI_QUP)			+= spi-qup.o
+@@ -97,7 +97,7 @@ obj-$(CONFIG_SPI_QUP)			+= spi-qup.o
  obj-$(CONFIG_SPI_ROCKCHIP)		+= spi-rockchip.o
+ obj-$(CONFIG_SPI_ROCKCHIP_SFC)		+= spi-rockchip-sfc.o
  obj-$(CONFIG_SPI_RB4XX)			+= spi-rb4xx.o
 -obj-$(CONFIG_MACH_REALTEK_RTL)		+= spi-realtek-rtl.o
 +obj-$(CONFIG_RTL83XX)			+= spi-realtek-rtl.o

target/linux/realtek/patches-5.15/305-irqchip-update-dependency-for-irq-realtek-rtl.patch

@@ -14,9 +14,12 @@ Submitted-by: INAGAKI Hiroshi <[email protected]>
 
 --- a/drivers/irqchip/Makefile
 +++ b/drivers/irqchip/Makefile
-@@ -114,4 +114,4 @@ obj-$(CONFIG_LOONGSON_PCH_PIC)		+= irq-l
+@@ -112,7 +112,7 @@ obj-$(CONFIG_LOONGSON_PCH_PIC)		+= irq-l
  obj-$(CONFIG_LOONGSON_PCH_MSI)		+= irq-loongson-pch-msi.o
  obj-$(CONFIG_MST_IRQ)			+= irq-mst-intc.o
  obj-$(CONFIG_SL28CPLD_INTC)		+= irq-sl28cpld.o
 -obj-$(CONFIG_MACH_REALTEK_RTL)		+= irq-realtek-rtl.o
 +obj-$(CONFIG_RTL83XX)			+= irq-realtek-rtl.o
+ obj-$(CONFIG_WPCM450_AIC)		+= irq-wpcm450-aic.o
+ obj-$(CONFIG_IRQ_IDT3243X)		+= irq-idt3243x.o
+ obj-$(CONFIG_APPLE_AIC)			+= irq-apple-aic.o

target/linux/realtek/patches-5.15/307-wdt-update-dependency-for-realtek-otto-wdt.patch

@@ -17,7 +17,7 @@ Tested-by: Stijn Tintel <[email protected]>
 
 --- a/drivers/watchdog/Kconfig
 +++ b/drivers/watchdog/Kconfig
-@@ -997,10 +997,10 @@ config RTD119X_WATCHDOG
+@@ -956,10 +956,10 @@ config RTD119X_WATCHDOG
  
  config REALTEK_OTTO_WDT
  	tristate "Realtek Otto MIPS watchdog support"

target/linux/realtek/patches-5.15/310-add-i2c-rtl9300-support.patch

@@ -17,7 +17,7 @@ Submitted-by: Birger Koblitz <[email protected]>
 
 --- a/drivers/i2c/busses/Kconfig
 +++ b/drivers/i2c/busses/Kconfig
-@@ -954,6 +954,16 @@ config I2C_RK3X
+@@ -949,6 +949,16 @@ config I2C_RK3X
  	  This driver can also be built as a module. If so, the module will
  	  be called i2c-rk3x.
  
@@ -36,7 +36,7 @@ Submitted-by: Birger Koblitz <[email protected]>
  	help
 --- a/drivers/i2c/busses/Makefile
 +++ b/drivers/i2c/busses/Makefile
-@@ -95,6 +95,7 @@ obj-$(CONFIG_I2C_QCOM_GENI)	+= i2c-qcom-
+@@ -94,6 +94,7 @@ obj-$(CONFIG_I2C_QCOM_GENI)	+= i2c-qcom-
  obj-$(CONFIG_I2C_QUP)		+= i2c-qup.o
  obj-$(CONFIG_I2C_RIIC)		+= i2c-riic.o
  obj-$(CONFIG_I2C_RK3X)		+= i2c-rk3x.o

target/linux/realtek/patches-5.15/312-rt9313-support.patch

@@ -16,7 +16,7 @@ Submitted-by: Birger Koblitz <[email protected]>
 
 --- a/arch/mips/Makefile
 +++ b/arch/mips/Makefile
-@@ -307,14 +307,24 @@ endif
+@@ -310,14 +310,24 @@ endif
  
  KBUILD_AFLAGS	+= $(cflags-y)
  KBUILD_CFLAGS	+= $(cflags-y)

target/linux/realtek/patches-5.15/315-irqchip-irq-realtek-rtl-add-VPE-support.patch

@@ -83,7 +83,7 @@ Submitted-by: Birger Koblitz <[email protected]>
  
  	raw_spin_unlock_irqrestore(&irq_lock, flags);
  }
-@@ -44,137 +86,247 @@ static void realtek_ictl_mask_irq(struct
+@@ -44,52 +86,137 @@ static void realtek_ictl_mask_irq(struct
  {
  	unsigned long flags;
  	u32 value;
@@ -144,19 +144,18 @@ Submitted-by: Birger Koblitz <[email protected]>
  
  static int intc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
  {
--	irq_set_chip_and_handler(hw, &realtek_ictl_irq, handle_level_irq);
 +	struct realtek_ictl_output *output = d->host_data;
 +	unsigned long flags;
 +
-+	irq_set_chip_and_handler(irq, &realtek_ictl_irq, handle_level_irq);
-+
+ 	irq_set_chip_and_handler(irq, &realtek_ictl_irq, handle_level_irq);
+ 
 +	raw_spin_lock_irqsave(&irq_lock, flags);
 +
 +	output->child_mask |= BIT(hw);
 +	write_irr(REG(RTL_ICTL_IRR0, 0), hw, output->output_index + 1);
 +
 +	raw_spin_unlock_irqrestore(&irq_lock, flags);
- 
++
  	return 0;
  }
  
@@ -208,37 +207,32 @@ Submitted-by: Birger Koblitz <[email protected]>
 +	struct realtek_ictl_output *output = irq_desc_get_handler_data(desc);
  	struct irq_chip *chip = irq_desc_get_chip(desc);
 -	struct irq_domain *domain;
--	unsigned int pending;
 +	int cpu = smp_processor_id();
-+	unsigned long pending;
-+	unsigned int soc_int;
+ 	unsigned long pending;
+ 	unsigned int soc_int;
  
  	chained_irq_enter(chip, desc);
 -	pending = readl(REG(RTL_ICTL_GIMR)) & readl(REG(RTL_ICTL_GISR));
 +	pending = readl(REG(RTL_ICTL_GIMR, cpu)) & readl(REG(RTL_ICTL_GISR, cpu))
 +		& output->child_mask;
-+
+ 
  	if (unlikely(!pending)) {
  		spurious_interrupt();
  		goto out;
  	}
+ 
 -	domain = irq_desc_get_handler_data(desc);
--	generic_handle_irq(irq_find_mapping(domain, __ffs(pending)));
-+
+-	for_each_set_bit(soc_int, &pending, 32)
+-		generic_handle_domain_irq(domain, soc_int);
 +	for_each_set_bit(soc_int, &pending, RTL_ICTL_NUM_INPUTS)
-+		generic_handle_irq(irq_find_mapping(output->domain, soc_int));
-+//		generic_handle_domain_irq(output->domain, soc_int);
++		generic_handle_domain_irq(output->domain, soc_int);
  
  out:
  	chained_irq_exit(chip, desc);
- }
- 
--/*
-- * SoC interrupts are cascaded to MIPS CPU interrupts according to the
-- * interrupt-map in the device tree. Each SoC interrupt gets 4 bits for
-- * the CPU interrupt in an Interrupt Routing Register. Max 32 SoC interrupts
-- * thus go into 4 IRRs.
-- */
+@@ -102,85 +229,110 @@ out:
+  * thus go into 4 IRRs. A routing value of '0' means the interrupt is left
+  * disconnected. Routing values {1..15} connect to output lines {0..14}.
+  */
 -static int __init map_interrupts(struct device_node *node, struct irq_domain *domain)
 +static int __init setup_parent_interrupts(struct device_node *node, int *parents,
 +	unsigned int num_parents)
@@ -282,12 +276,12 @@ Submitted-by: Birger Koblitz <[email protected]>
 -		if (!cpu_ictl)
 -			return -EINVAL;
 -		ret = of_property_read_u32(cpu_ictl, "#interrupt-cells", &tmp);
+-		of_node_put(cpu_ictl);
 -		if (ret || tmp != 1)
 -			return -EINVAL;
--		of_node_put(cpu_ictl);
 -
 -		cpu_int = be32_to_cpup(imap + 2);
--		if (cpu_int > 7)
+-		if (cpu_int > 7 || cpu_int < 2)
 -			return -EINVAL;
 -
 -		if (!(mips_irqs_set & BIT(cpu_int))) {
@@ -299,7 +293,8 @@ Submitted-by: Birger Koblitz <[email protected]>
 +		if (!domain)
 +			goto domain_err;
  
--		regs[(soc_int * 4) / 32] |= cpu_int << (soc_int * 4) % 32;
+-		/* Use routing values (1..6) for CPU interrupts (2..7) */
+-		regs[(soc_int * 4) / 32] |= (cpu_int - 1) << (soc_int * 4) % 32;
 -		imap += 3;
 -	}
 +		output->fwnode = of_node_to_fwnode(node);

target/linux/realtek/patches-5.15/316-otto-gpio-uniprocessor-irq-mask.patch

@@ -22,7 +22,7 @@ Submitted-by: Sander Vanheule <[email protected]>
 
 --- a/drivers/gpio/gpio-realtek-otto.c
 +++ b/drivers/gpio/gpio-realtek-otto.c
-@@ -304,6 +304,7 @@ static int realtek_gpio_irq_set_affinity
+@@ -301,6 +301,7 @@ static int realtek_gpio_irq_set_affinity
  static int realtek_gpio_irq_init(struct gpio_chip *gc)
  {
  	struct realtek_gpio_ctrl *ctrl = gpiochip_get_data(gc);
@@ -30,7 +30,7 @@ Submitted-by: Sander Vanheule <[email protected]>
  	unsigned int port;
  	int cpu;
  
-@@ -311,8 +312,16 @@ static int realtek_gpio_irq_init(struct
+@@ -308,8 +309,16 @@ static int realtek_gpio_irq_init(struct
  		realtek_gpio_write_imr(ctrl, port, 0, 0);
  		realtek_gpio_clear_isr(ctrl, port, GENMASK(7, 0));
  

target/linux/realtek/patches-5.15/317-gpio-realtek-otto-switch-to-32-bit-I-O.patch

@@ -30,7 +30,6 @@ Signed-off-by: Bartosz Golaszewski <[email protected]>
 
 Update patch for missing upstream changes:
   - commit a01a40e33499 ("gpio: realtek-otto: Make the irqchip immutable")
-  - commit dbd1c54fc820 ("gpio: Bulk conversion to generic_handle_domain_irq()")
 Signed-off-by: Sander Vanheule <[email protected]>
 
 ---
@@ -241,13 +240,12 @@ Signed-off-by: Sander Vanheule <[email protected]>
  	raw_spin_unlock_irqrestore(&ctrl->lock, flags);
  
  	return 0;
-@@ -238,31 +248,24 @@ static void realtek_gpio_irq_handler(str
+@@ -238,28 +248,21 @@ static void realtek_gpio_irq_handler(str
  	struct gpio_chip *gc = irq_desc_get_handler_data(desc);
  	struct realtek_gpio_ctrl *ctrl = gpiochip_get_data(gc);
  	struct irq_chip *irq_chip = irq_desc_get_chip(desc);
 -	unsigned int lines_done;
 -	unsigned int port_pin_count;
- 	unsigned int irq;
  	unsigned long status;
  	int offset;
  
@@ -256,15 +254,12 @@ Signed-off-by: Sander Vanheule <[email protected]>
 -	for (lines_done = 0; lines_done < gc->ngpio; lines_done += 8) {
 -		status = realtek_gpio_read_isr(ctrl, lines_done / 8);
 -		port_pin_count = min(gc->ngpio - lines_done, 8U);
--		for_each_set_bit(offset, &status, port_pin_count) {
--			irq = irq_find_mapping(gc->irq.domain, offset + lines_done);
--			generic_handle_irq(irq);
--		}
+-		for_each_set_bit(offset, &status, port_pin_count)
+-			generic_handle_domain_irq(gc->irq.domain, offset + lines_done);
+-	}
 +	status = realtek_gpio_read_isr(ctrl);
-+	for_each_set_bit(offset, &status, gc->ngpio) {
-+		irq = irq_find_mapping(gc->irq.domain, offset);
-+		generic_handle_irq(irq);
- 	}
++	for_each_set_bit(offset, &status, gc->ngpio)
++		generic_handle_domain_irq(gc->irq.domain, offset);
  
  	chained_irq_exit(irq_chip, desc);
  }
@@ -279,7 +274,7 @@ Signed-off-by: Sander Vanheule <[email protected]>
  }
  
  static int realtek_gpio_irq_set_affinity(struct irq_data *data,
-@@ -270,12 +273,10 @@ static int realtek_gpio_irq_set_affinity
+@@ -267,12 +270,10 @@ static int realtek_gpio_irq_set_affinity
  {
  	struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
  	unsigned int line = irqd_to_hwirq(data);
@@ -293,7 +288,7 @@ Signed-off-by: Sander Vanheule <[email protected]>
  
  	if (!ctrl->cpumask_base)
  		return -ENXIO;
-@@ -283,15 +284,15 @@ static int realtek_gpio_irq_set_affinity
+@@ -280,15 +281,15 @@ static int realtek_gpio_irq_set_affinity
  	raw_spin_lock_irqsave(&ctrl->lock, flags);
  
  	for_each_cpu(cpu, &ctrl->cpu_irq_maskable) {
@@ -314,7 +309,7 @@ Signed-off-by: Sander Vanheule <[email protected]>
  	}
  
  	raw_spin_unlock_irqrestore(&ctrl->lock, flags);
-@@ -305,22 +306,23 @@ static int realtek_gpio_irq_init(struct
+@@ -302,22 +303,23 @@ static int realtek_gpio_irq_init(struct
  {
  	struct realtek_gpio_ctrl *ctrl = gpiochip_get_data(gc);
  	void __iomem *irq_cpu_mask;
@@ -352,7 +347,7 @@ Signed-off-by: Sander Vanheule <[email protected]>
  		}
  	}
  
-@@ -393,12 +395,14 @@ static int realtek_gpio_probe(struct pla
+@@ -390,12 +392,14 @@ static int realtek_gpio_probe(struct pla
  
  	if (dev_flags & GPIO_PORTS_REVERSED) {
  		bgpio_flags = 0;

target/linux/realtek/patches-5.15/318-add-rtl83xx-clk-support.patch

@@ -13,20 +13,20 @@ Submitted-by: Markus Stockhausen <[email protected]>
 
 --- a/drivers/clk/Kconfig
 +++ b/drivers/clk/Kconfig
-@@ -372,6 +372,7 @@ source "drivers/clk/mediatek/Kconfig"
- source "drivers/clk/meson/Kconfig"
+@@ -405,6 +405,7 @@ source "drivers/clk/mstar/Kconfig"
  source "drivers/clk/mvebu/Kconfig"
+ source "drivers/clk/pistachio/Kconfig"
  source "drivers/clk/qcom/Kconfig"
 +source "drivers/clk/realtek/Kconfig"
+ source "drivers/clk/ralink/Kconfig"
  source "drivers/clk/renesas/Kconfig"
  source "drivers/clk/rockchip/Kconfig"
- source "drivers/clk/samsung/Kconfig"
 --- a/drivers/clk/Makefile
 +++ b/drivers/clk/Makefile
-@@ -100,6 +100,7 @@ obj-$(CONFIG_COMMON_CLK_NXP)		+= nxp/
- obj-$(CONFIG_MACH_PISTACHIO)		+= pistachio/
+@@ -101,6 +101,7 @@ obj-$(CONFIG_COMMON_CLK_PISTACHIO)	+= pi
  obj-$(CONFIG_COMMON_CLK_PXA)		+= pxa/
  obj-$(CONFIG_COMMON_CLK_QCOM)		+= qcom/
+ obj-y					+= ralink/
 +obj-$(CONFIG_COMMON_CLK_REALTEK)	+= realtek/
  obj-y					+= renesas/
  obj-$(CONFIG_ARCH_ROCKCHIP)		+= rockchip/

target/linux/realtek/patches-5.15/319-irqchip-irq-realtek-rtl-fix-VPE-affinity.patch

@@ -143,7 +143,7 @@ Submitted-by: INAGAKI Hiroshi <[email protected]>
  
  	raw_spin_unlock_irqrestore(&irq_lock, flags);
  
-@@ -279,9 +315,11 @@ static int __init realtek_rtl_of_init(st
+@@ -285,9 +321,11 @@ static int __init realtek_rtl_of_init(st
  			cpumask_set_cpu(cpu, &realtek_ictl_cpu_configurable);
  
  			/* Disable all cascaded interrupts and clear routing */

target/linux/realtek/patches-5.15/700-net-dsa-add-support-for-rtl838x-switch.patch

@@ -22,19 +22,21 @@ Submitted-by: John Crispin <[email protected]>
 
 --- a/drivers/net/dsa/Kconfig
 +++ b/drivers/net/dsa/Kconfig
-@@ -68,6 +68,8 @@ config NET_DSA_QCA8K
- 	  This enables support for the Qualcomm Atheros QCA8K Ethernet
- 	  switch chips.
+@@ -60,6 +60,8 @@ source "drivers/net/dsa/sja1105/Kconfig"
+ 
+ source "drivers/net/dsa/xrs700x/Kconfig"
  
 +source "drivers/net/dsa/rtl83xx/Kconfig"
 +
  config NET_DSA_REALTEK_SMI
  	tristate "Realtek SMI Ethernet switch family support"
- 	depends on NET_DSA
+ 	select NET_DSA_TAG_RTL4_A
 --- a/drivers/net/dsa/Makefile
 +++ b/drivers/net/dsa/Makefile
-@@ -23,3 +23,4 @@ obj-y				+= mv88e6xxx/
+@@ -22,5 +22,6 @@ obj-y				+= microchip/
+ obj-y				+= mv88e6xxx/
  obj-y				+= ocelot/
  obj-y				+= qca/
- obj-y				+= sja1105/
 +obj-y				+= rtl83xx/
+ obj-y				+= sja1105/
+ obj-y				+= xrs700x/

target/linux/realtek/patches-5.15/701-net-dsa-add-rtl838x-support-for-tag-trailer.patch

@@ -34,7 +34,7 @@ Submitted-by: John Crispin <[email protected]>
  	trailer[2] = 0x10;
  	trailer[3] = 0x00;
  
-@@ -34,12 +39,23 @@ static struct sk_buff *trailer_rcv(struc
+@@ -33,12 +38,23 @@ static struct sk_buff *trailer_rcv(struc
  		return NULL;
  
  	trailer = skb_tail_pointer(skb) - 4;

target/linux/realtek/patches-5.15/702-net-ethernet-add-support-for-rtl838x-ethernet.patch

@@ -22,7 +22,7 @@ Submitted-by: John Crispin <[email protected]>
 
 --- a/drivers/net/ethernet/Kconfig
 +++ b/drivers/net/ethernet/Kconfig
-@@ -163,6 +163,13 @@ source "drivers/net/ethernet/rdc/Kconfig
+@@ -166,6 +166,13 @@ source "drivers/net/ethernet/rdc/Kconfig
  source "drivers/net/ethernet/realtek/Kconfig"
  source "drivers/net/ethernet/renesas/Kconfig"
  source "drivers/net/ethernet/rocker/Kconfig"
@@ -35,10 +35,10 @@ Submitted-by: John Crispin <[email protected]>
 +
  source "drivers/net/ethernet/samsung/Kconfig"
  source "drivers/net/ethernet/seeq/Kconfig"
- source "drivers/net/ethernet/sfc/Kconfig"
+ source "drivers/net/ethernet/sgi/Kconfig"
 --- a/drivers/net/ethernet/Makefile
 +++ b/drivers/net/ethernet/Makefile
-@@ -75,6 +75,7 @@ obj-$(CONFIG_NET_VENDOR_REALTEK) += real
+@@ -77,6 +77,7 @@ obj-$(CONFIG_NET_VENDOR_REALTEK) += real
  obj-$(CONFIG_NET_VENDOR_RENESAS) += renesas/
  obj-$(CONFIG_NET_VENDOR_RDC) += rdc/
  obj-$(CONFIG_NET_VENDOR_ROCKER) += rocker/

target/linux/realtek/patches-5.15/703-include-linux-add-phy-ops-for-rtl838x.patch

@@ -21,7 +21,7 @@ Submitted-by: John Crispin <[email protected]>
 
 --- a/include/linux/phy.h
 +++ b/include/linux/phy.h
-@@ -885,6 +885,10 @@ struct phy_driver {
+@@ -943,6 +943,10 @@ struct phy_driver {
  	int (*get_sqi)(struct phy_device *dev);
  	/** @get_sqi_max: Get the maximum signal quality indication */
  	int (*get_sqi_max)(struct phy_device *dev);

target/linux/realtek/patches-5.15/704-drivers-net-phy-eee-support-for-rtl838x.patch

@@ -21,7 +21,7 @@ Submitted-by: John Crispin <[email protected]>
 
 --- a/drivers/net/phy/phylink.c
 +++ b/drivers/net/phy/phylink.c
-@@ -1449,6 +1449,11 @@ int phylink_ethtool_ksettings_set(struct
+@@ -1944,6 +1944,11 @@ int phylink_ethtool_ksettings_set(struct
  		 *   the presence of a PHY, this should not be changed as that
  		 *   should be determined from the media side advertisement.
  		 */
@@ -33,7 +33,7 @@ Submitted-by: John Crispin <[email protected]>
  		return phy_ethtool_ksettings_set(pl->phydev, kset);
  	}
  
-@@ -1750,8 +1755,11 @@ int phylink_ethtool_get_eee(struct phyli
+@@ -2247,8 +2252,11 @@ int phylink_ethtool_get_eee(struct phyli
  
  	ASSERT_RTNL();
  
@@ -46,7 +46,7 @@ Submitted-by: John Crispin <[email protected]>
  
  	return ret;
  }
-@@ -1768,8 +1776,11 @@ int phylink_ethtool_set_eee(struct phyli
+@@ -2265,8 +2273,11 @@ int phylink_ethtool_set_eee(struct phyli
  
  	ASSERT_RTNL();
  

target/linux/realtek/patches-5.15/704-include-linux-add-phy-hsgmii-mode.patch

@@ -14,7 +14,7 @@ Submitted-by: Birger Koblitz <[email protected]>
 
 --- a/include/linux/phy.h
 +++ b/include/linux/phy.h
-@@ -134,6 +134,7 @@ typedef enum {
+@@ -138,6 +138,7 @@ typedef enum {
  	PHY_INTERFACE_MODE_XGMII,
  	PHY_INTERFACE_MODE_XLGMII,
  	PHY_INTERFACE_MODE_MOCA,
@@ -22,7 +22,7 @@ Submitted-by: Birger Koblitz <[email protected]>
  	PHY_INTERFACE_MODE_QSGMII,
  	PHY_INTERFACE_MODE_TRGMII,
  	PHY_INTERFACE_MODE_100BASEX,
-@@ -201,6 +202,8 @@ static inline const char *phy_modes(phy_
+@@ -243,6 +244,8 @@ static inline const char *phy_modes(phy_
  		return "xlgmii";
  	case PHY_INTERFACE_MODE_MOCA:
  		return "moca";

target/linux/realtek/patches-5.15/705-add-rtl-phy.patch

@@ -14,7 +14,7 @@ Submitted-by: Birger Koblitz <[email protected]>
 
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -330,6 +330,12 @@ config REALTEK_PHY
+@@ -356,6 +356,12 @@ config REALTEK_PHY
  	help
  	  Supports the Realtek 821x PHY.
  
@@ -29,7 +29,7 @@ Submitted-by: Birger Koblitz <[email protected]>
  	help
 --- a/drivers/net/phy/Makefile
 +++ b/drivers/net/phy/Makefile
-@@ -89,6 +89,7 @@ obj-$(CONFIG_NATIONAL_PHY)	+= national.o
+@@ -93,6 +93,7 @@ obj-$(CONFIG_NXP_C45_TJA11XX_PHY)	+= nxp
  obj-$(CONFIG_NXP_TJA11XX_PHY)	+= nxp-tja11xx.o
  obj-$(CONFIG_QSEMI_PHY)		+= qsemi.o
  obj-$(CONFIG_REALTEK_PHY)	+= realtek.o

target/linux/realtek/patches-5.15/705-include-linux-phy-increase-phy-address-number-for-rtl839x.patch

@@ -21,7 +21,7 @@ Submitted-by: John Crispin <[email protected]>
 
 --- a/include/linux/phy.h
 +++ b/include/linux/phy.h
-@@ -233,7 +233,7 @@ static inline const char *phy_modes(phy_
+@@ -279,7 +279,7 @@ static inline const char *phy_modes(phy_
  #define PHY_INIT_TIMEOUT	100000
  #define PHY_FORCE_TIMEOUT	10
  

target/linux/realtek/patches-5.15/710-net-phy-sfp-re-probe-modules-on-DEV_UP-event.patch

@@ -10,7 +10,7 @@ Signed-off-by: Antoine Tenart <[email protected]>
 
 --- a/drivers/net/phy/sfp.c
 +++ b/drivers/net/phy/sfp.c
-@@ -1966,6 +1966,13 @@ static void sfp_sm_module(struct sfp *sf
+@@ -2147,6 +2147,13 @@ static void sfp_sm_module(struct sfp *sf
  		return;
  	}
  

target/linux/realtek/patches-5.15/711-net-phy-add-an-MDIO-SMBus-library.patch

@@ -15,7 +15,7 @@ Signed-off-by: Antoine Tenart <[email protected]>
 
 --- a/drivers/net/mdio/Kconfig
 +++ b/drivers/net/mdio/Kconfig
-@@ -40,6 +40,17 @@ config MDIO_SUN4I
+@@ -54,6 +54,17 @@ config MDIO_SUN4I
  	  interface units of the Allwinner SoC that have an EMAC (A10,
  	  A12, A10s, etc.)
  
@@ -35,7 +35,7 @@ Signed-off-by: Antoine Tenart <[email protected]>
  	depends on ARCH_XGENE || COMPILE_TEST
 --- a/drivers/net/mdio/Makefile
 +++ b/drivers/net/mdio/Makefile
-@@ -17,6 +17,7 @@ obj-$(CONFIG_MDIO_MOXART)		+= mdio-moxar
+@@ -19,6 +19,7 @@ obj-$(CONFIG_MDIO_MOXART)		+= mdio-moxar
  obj-$(CONFIG_MDIO_MSCC_MIIM)		+= mdio-mscc-miim.o
  obj-$(CONFIG_MDIO_MVUSB)		+= mdio-mvusb.o
  obj-$(CONFIG_MDIO_OCTEON)		+= mdio-octeon.o

target/linux/realtek/patches-5.15/712-net-phy-sfp-add-support-for-SMBus.patch

@@ -10,7 +10,7 @@ Signed-off-by: Antoine Tenart <[email protected]>
 
 --- a/drivers/net/phy/sfp.c
 +++ b/drivers/net/phy/sfp.c
-@@ -413,32 +413,72 @@ static int sfp_i2c_write(struct sfp *sfp
+@@ -539,32 +539,72 @@ static int sfp_i2c_write(struct sfp *sfp
  	return ret == ARRAY_SIZE(msgs) ? len : 0;
  }
  

target/linux/realtek/patches-5.15/800-net-mdio-support-hardware-assisted-indirect-access.patch

@@ -32,7 +32,7 @@ Signed-off-by: Daniel Golle <[email protected]>
 
 --- a/drivers/net/phy/mdio_bus.c
 +++ b/drivers/net/phy/mdio_bus.c
-@@ -734,6 +734,32 @@ out:
+@@ -737,6 +737,32 @@ out:
  }
  
  /**
@@ -65,9 +65,9 @@ Signed-off-by: Daniel Golle <[email protected]>
   * __mdiobus_read - Unlocked version of the mdiobus_read function
   * @bus: the mii_bus struct
   * @addr: the phy address
-@@ -749,7 +775,10 @@ int __mdiobus_read(struct mii_bus *bus,
+@@ -752,7 +778,10 @@ int __mdiobus_read(struct mii_bus *bus,
  
- 	WARN_ON_ONCE(!mutex_is_locked(&bus->mdio_lock));
+ 	lockdep_assert_held_once(&bus->mdio_lock);
  
 -	retval = bus->read(bus, addr, regnum);
 +	if (bus->read_paged)
@@ -77,7 +77,7 @@ Signed-off-by: Daniel Golle <[email protected]>
  
  	trace_mdio_access(bus, 1, addr, regnum, retval, retval);
  	mdiobus_stats_acct(&bus->stats[addr], true, retval);
-@@ -759,6 +788,40 @@ int __mdiobus_read(struct mii_bus *bus,
+@@ -762,6 +791,40 @@ int __mdiobus_read(struct mii_bus *bus,
  EXPORT_SYMBOL(__mdiobus_read);
  
  /**
@@ -118,9 +118,9 @@ Signed-off-by: Daniel Golle <[email protected]>
   * __mdiobus_write - Unlocked version of the mdiobus_write function
   * @bus: the mii_bus struct
   * @addr: the phy address
-@@ -775,7 +838,10 @@ int __mdiobus_write(struct mii_bus *bus,
+@@ -778,7 +841,10 @@ int __mdiobus_write(struct mii_bus *bus,
  
- 	WARN_ON_ONCE(!mutex_is_locked(&bus->mdio_lock));
+ 	lockdep_assert_held_once(&bus->mdio_lock);
  
 -	err = bus->write(bus, addr, regnum, val);
 +	if (bus->write_paged)
@@ -130,7 +130,7 @@ Signed-off-by: Daniel Golle <[email protected]>
  
  	trace_mdio_access(bus, 0, addr, regnum, val, err);
  	mdiobus_stats_acct(&bus->stats[addr], false, err);
-@@ -785,6 +851,39 @@ int __mdiobus_write(struct mii_bus *bus,
+@@ -788,6 +854,39 @@ int __mdiobus_write(struct mii_bus *bus,
  EXPORT_SYMBOL(__mdiobus_write);
  
  /**
@@ -170,7 +170,7 @@ Signed-off-by: Daniel Golle <[email protected]>
   * __mdiobus_modify_changed - Unlocked version of the mdiobus_modify function
   * @bus: the mii_bus struct
   * @addr: the phy address
-@@ -817,6 +916,43 @@ int __mdiobus_modify_changed(struct mii_
+@@ -820,6 +919,43 @@ int __mdiobus_modify_changed(struct mii_
  EXPORT_SYMBOL_GPL(__mdiobus_modify_changed);
  
  /**
@@ -214,7 +214,7 @@ Signed-off-by: Daniel Golle <[email protected]>
   * mdiobus_read_nested - Nested version of the mdiobus_read function
   * @bus: the mii_bus struct
   * @addr: the phy address
-@@ -842,6 +978,79 @@ int mdiobus_read_nested(struct mii_bus *
+@@ -845,6 +981,79 @@ int mdiobus_read_nested(struct mii_bus *
  EXPORT_SYMBOL(mdiobus_read_nested);
  
  /**
@@ -294,7 +294,7 @@ Signed-off-by: Daniel Golle <[email protected]>
   * mdiobus_read - Convenience function for reading a given MII mgmt register
   * @bus: the mii_bus struct
   * @addr: the phy address
-@@ -864,6 +1073,29 @@ int mdiobus_read(struct mii_bus *bus, in
+@@ -867,6 +1076,29 @@ int mdiobus_read(struct mii_bus *bus, in
  EXPORT_SYMBOL(mdiobus_read);
  
  /**
@@ -324,7 +324,7 @@ Signed-off-by: Daniel Golle <[email protected]>
   * mdiobus_write_nested - Nested version of the mdiobus_write function
   * @bus: the mii_bus struct
   * @addr: the phy address
-@@ -890,6 +1122,33 @@ int mdiobus_write_nested(struct mii_bus
+@@ -893,6 +1125,33 @@ int mdiobus_write_nested(struct mii_bus
  EXPORT_SYMBOL(mdiobus_write_nested);
  
  /**
@@ -358,7 +358,7 @@ Signed-off-by: Daniel Golle <[email protected]>
   * mdiobus_write - Convenience function for writing a given MII mgmt register
   * @bus: the mii_bus struct
   * @addr: the phy address
-@@ -913,6 +1172,30 @@ int mdiobus_write(struct mii_bus *bus, i
+@@ -916,6 +1175,30 @@ int mdiobus_write(struct mii_bus *bus, i
  EXPORT_SYMBOL(mdiobus_write);
  
  /**
@@ -389,7 +389,7 @@ Signed-off-by: Daniel Golle <[email protected]>
   * mdiobus_modify - Convenience function for modifying a given mdio device
   *	register
   * @bus: the mii_bus struct
-@@ -934,6 +1217,51 @@ int mdiobus_modify(struct mii_bus *bus,
+@@ -937,6 +1220,51 @@ int mdiobus_modify(struct mii_bus *bus,
  EXPORT_SYMBOL_GPL(mdiobus_modify);
  
  /**
@@ -443,7 +443,7 @@ Signed-off-by: Daniel Golle <[email protected]>
   * @dev: target MDIO device
 --- a/drivers/net/phy/phy-core.c
 +++ b/drivers/net/phy/phy-core.c
-@@ -481,10 +481,16 @@ int __phy_read_mmd(struct phy_device *ph
+@@ -482,10 +482,16 @@ int __phy_read_mmd(struct phy_device *ph
  		struct mii_bus *bus = phydev->mdio.bus;
  		int phy_addr = phydev->mdio.addr;
  
@@ -464,7 +464,7 @@ Signed-off-by: Daniel Golle <[email protected]>
  	}
  	return val;
  }
-@@ -537,12 +543,18 @@ int __phy_write_mmd(struct phy_device *p
+@@ -538,12 +544,18 @@ int __phy_write_mmd(struct phy_device *p
  		struct mii_bus *bus = phydev->mdio.bus;
  		int phy_addr = phydev->mdio.addr;
  
@@ -487,7 +487,7 @@ Signed-off-by: Daniel Golle <[email protected]>
  	}
  	return ret;
  }
-@@ -748,6 +760,13 @@ EXPORT_SYMBOL_GPL(phy_modify_mmd);
+@@ -749,6 +761,13 @@ EXPORT_SYMBOL_GPL(phy_modify_mmd);
  
  static int __phy_read_page(struct phy_device *phydev)
  {
@@ -501,7 +501,7 @@ Signed-off-by: Daniel Golle <[email protected]>
  	if (WARN_ONCE(!phydev->drv->read_page, "read_page callback not available, PHY driver not loaded?\n"))
  		return -EOPNOTSUPP;
  
-@@ -756,6 +775,13 @@ static int __phy_read_page(struct phy_de
+@@ -757,6 +776,13 @@ static int __phy_read_page(struct phy_de
  
  static int __phy_write_page(struct phy_device *phydev, int page)
  {
@@ -515,7 +515,7 @@ Signed-off-by: Daniel Golle <[email protected]>
  	if (WARN_ONCE(!phydev->drv->write_page, "write_page callback not available, PHY driver not loaded?\n"))
  		return -EOPNOTSUPP;
  
-@@ -857,6 +883,18 @@ int phy_read_paged(struct phy_device *ph
+@@ -858,6 +884,18 @@ int phy_read_paged(struct phy_device *ph
  {
  	int ret = 0, oldpage;
  
@@ -534,7 +534,7 @@ Signed-off-by: Daniel Golle <[email protected]>
  	oldpage = phy_select_page(phydev, page);
  	if (oldpage >= 0)
  		ret = __phy_read(phydev, regnum);
-@@ -878,6 +916,18 @@ int phy_write_paged(struct phy_device *p
+@@ -879,6 +917,18 @@ int phy_write_paged(struct phy_device *p
  {
  	int ret = 0, oldpage;
  
@@ -563,7 +563,7 @@ Signed-off-by: Daniel Golle <[email protected]>
  #define MII_DEVADDR_C45_SHIFT	16
  #define MII_DEVADDR_C45_MASK	GENMASK(20, 16)
  #define MII_REGADDR_C45_MASK	GENMASK(15, 0)
-@@ -327,11 +328,19 @@ static inline void mii_10gbt_stat_mod_li
+@@ -340,11 +341,19 @@ static inline void mii_10gbt_stat_mod_li
  			 advertising, lpa & MDIO_AN_10GBT_STAT_LP10G);
  }
  
@@ -583,7 +583,7 @@ Signed-off-by: Daniel Golle <[email protected]>
  int mdiobus_read(struct mii_bus *bus, int addr, u32 regnum);
  int mdiobus_read_nested(struct mii_bus *bus, int addr, u32 regnum);
  int mdiobus_write(struct mii_bus *bus, int addr, u32 regnum, u16 val);
-@@ -339,11 +348,51 @@ int mdiobus_write_nested(struct mii_bus
+@@ -352,11 +361,51 @@ int mdiobus_write_nested(struct mii_bus
  int mdiobus_modify(struct mii_bus *bus, int addr, u32 regnum, u16 mask,
  		   u16 set);
  
@@ -635,7 +635,7 @@ Signed-off-by: Daniel Golle <[email protected]>
  static inline u16 mdiobus_c45_regad(u32 regnum)
  {
  	return FIELD_GET(MII_REGADDR_C45_MASK, regnum);
-@@ -367,6 +416,19 @@ static inline int __mdiobus_c45_write(st
+@@ -380,6 +429,19 @@ static inline int __mdiobus_c45_write(st
  			       val);
  }
  
@@ -665,7 +665,7 @@ Signed-off-by: Daniel Golle <[email protected]>
  #define MDIO_DEVICE_IS_PHY	0x80000000
  
  /**
-@@ -374,6 +375,22 @@ struct mii_bus {
+@@ -420,6 +421,22 @@ struct mii_bus {
  
  	/** @shared: shared state across different PHYs */
  	struct phy_package_shared *shared[PHY_MAX_ADDR];
@@ -688,7 +688,7 @@ Signed-off-by: Daniel Golle <[email protected]>
  };
  #define to_mii_bus(d) container_of(d, struct mii_bus, dev)
  
-@@ -1651,6 +1668,66 @@ static inline int __phy_package_read(str
+@@ -1754,6 +1771,66 @@ static inline int __phy_package_read(str
  	return __mdiobus_read(phydev->mdio.bus, shared->addr, regnum);
  }
  
@@ -755,7 +755,7 @@ Signed-off-by: Daniel Golle <[email protected]>
  static inline int phy_package_write(struct phy_device *phydev,
  				    u32 regnum, u16 val)
  {
-@@ -1673,6 +1750,72 @@ static inline int __phy_package_write(st
+@@ -1776,6 +1853,72 @@ static inline int __phy_package_write(st
  	return __mdiobus_write(phydev->mdio.bus, shared->addr, regnum, val);
  }