ar71xx: add a generic GPIO latch driver

It will be used for the Mikrotik boards.

Signed-off-by: Gabor Juhos <[email protected]>

SVN-Revision: 39697

target/linux/ar71xx/config-3.10

@@ -147,6 +147,7 @@ CONFIG_GENERIC_PCI_IOMAP=y
 CONFIG_GENERIC_SMP_IDLE_THREAD=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_DEVRES=y
+# CONFIG_GPIO_LATCH is not set
 CONFIG_GPIO_NXP_74HC153=y
 CONFIG_GPIO_PCF857X=y
 CONFIG_GPIO_SYSFS=y

target/linux/ar71xx/files/drivers/gpio/gpio-latch.c

@@ -0,0 +1,219 @@
+/*
+ *  GPIO latch driver
+ *
+ *  Copyright (C) 2014 Gabor Juhos <[email protected]>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+
+#include <linux/platform_data/gpio-latch.h>
+
+struct gpio_latch_chip {
+	struct gpio_chip gc;
+
+	struct mutex mutex;
+	struct mutex latch_mutex;
+	bool latch_enabled;
+	int le_gpio;
+	bool le_active_low;
+	int *gpios;
+};
+
+static inline struct gpio_latch_chip *to_gpio_latch_chip(struct gpio_chip *gc)
+{
+	return container_of(gc, struct gpio_latch_chip, gc);
+}
+
+static void gpio_latch_lock(struct gpio_latch_chip *glc, bool enable)
+{
+	mutex_lock(&glc->mutex);
+
+	if (enable)
+		glc->latch_enabled = true;
+
+	if (glc->latch_enabled)
+		mutex_lock(&glc->latch_mutex);
+}
+
+static void gpio_latch_unlock(struct gpio_latch_chip *glc, bool disable)
+{
+	if (glc->latch_enabled)
+		mutex_unlock(&glc->latch_mutex);
+
+	if (disable)
+		glc->latch_enabled = true;
+
+	mutex_unlock(&glc->mutex);
+}
+
+static int
+gpio_latch_get(struct gpio_chip *gc, unsigned offset)
+{
+	struct gpio_latch_chip *glc = to_gpio_latch_chip(gc);
+	int ret;
+
+	gpio_latch_lock(glc, false);
+	ret = gpio_get_value(glc->gpios[offset]);
+	gpio_latch_unlock(glc, false);
+
+	return ret;
+}
+
+static void
+gpio_latch_set(struct gpio_chip *gc, unsigned offset, int value)
+{
+	struct gpio_latch_chip *glc = to_gpio_latch_chip(gc);
+	bool enable_latch = false;
+	bool disable_latch = false;
+	int gpio;
+
+	gpio = glc->gpios[offset];
+
+	if (gpio == glc->le_gpio) {
+		enable_latch = value ^ glc->le_active_low;
+		disable_latch = !enable_latch;
+	}
+
+	gpio_latch_lock(glc, enable_latch);
+	gpio_set_value(gpio, value);
+	gpio_latch_unlock(glc, disable_latch);
+}
+
+static int
+gpio_latch_direction_input(struct gpio_chip *gc, unsigned offset)
+{
+	struct gpio_latch_chip *glc = to_gpio_latch_chip(gc);
+	int ret;
+
+	gpio_latch_lock(glc, false);
+	ret = gpio_direction_input(glc->gpios[offset]);
+	gpio_latch_unlock(glc, false);
+
+	return ret;
+}
+
+static int
+gpio_latch_direction_output(struct gpio_chip *gc, unsigned offset, int value)
+{
+	struct gpio_latch_chip *glc = to_gpio_latch_chip(gc);
+	bool enable_latch = false;
+	bool disable_latch = false;
+	int gpio;
+	int ret;
+
+	gpio = glc->gpios[offset];
+
+	if (gpio == glc->le_gpio) {
+		enable_latch = value ^ glc->le_active_low;
+		disable_latch = !enable_latch;
+	}
+
+	gpio_latch_lock(glc, enable_latch);
+	ret = gpio_direction_output(gpio, value);
+	gpio_latch_unlock(glc, disable_latch);
+
+	return ret;
+}
+
+static int gpio_latch_probe(struct platform_device *pdev)
+{
+	struct gpio_latch_chip *glc;
+	struct gpio_latch_platform_data *pdata;
+	struct gpio_chip *gc;
+	int size;
+	int ret;
+	int i;
+
+	pdata = dev_get_platdata(&pdev->dev);
+	if (!pdata)
+		return -EINVAL;
+
+	if (pdata->le_gpio_index >= pdata->num_gpios ||
+	    !pdata->num_gpios ||
+	    !pdata->gpios)
+		return -EINVAL;
+
+	for (i = 0; i < pdata->num_gpios; i++) {
+		int gpio = pdata->gpios[i];
+
+		ret = devm_gpio_request(&pdev->dev, gpio,
+					GPIO_LATCH_DRIVER_NAME);
+		if (ret)
+			return ret;
+	}
+
+	glc = devm_kzalloc(&pdev->dev, sizeof(*glc), GFP_KERNEL);
+	if (!glc)
+		return -ENOMEM;
+
+	mutex_init(&glc->mutex);
+	mutex_init(&glc->latch_mutex);
+
+	size = pdata->num_gpios * sizeof(glc->gpios[0]);
+	glc->gpios = devm_kzalloc(&pdev->dev, size , GFP_KERNEL);
+	if (!glc->gpios)
+		return -ENOMEM;
+
+	memcpy(glc->gpios, pdata->gpios, size);
+
+	glc->le_gpio = glc->gpios[pdata->le_gpio_index];
+	glc->le_active_low = pdata->le_active_low;
+
+	gc = &glc->gc;
+
+	gc->label = GPIO_LATCH_DRIVER_NAME;
+	gc->base = pdata->base;
+	gc->can_sleep = true;
+	gc->ngpio = pdata->num_gpios;
+	gc->get = gpio_latch_get;
+	gc->set = gpio_latch_set;
+	gc->direction_input = gpio_latch_direction_input,
+	gc->direction_output = gpio_latch_direction_output;
+
+	platform_set_drvdata(pdev, glc);
+
+	ret = gpiochip_add(&glc->gc);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int gpio_latch_remove(struct platform_device *pdev)
+{
+	struct gpio_latch_chip *glc = platform_get_drvdata(pdev);
+
+	return gpiochip_remove(&glc->gc);;
+}
+
+
+static struct platform_driver gpio_latch_driver = {
+	.probe = gpio_latch_probe,
+	.remove = gpio_latch_remove,
+	.driver = {
+		.name = GPIO_LATCH_DRIVER_NAME,
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init gpio_latch_init(void)
+{
+	return platform_driver_register(&gpio_latch_driver);
+}
+
+postcore_initcall(gpio_latch_init);
+
+MODULE_DESCRIPTION("GPIO latch driver");
+MODULE_AUTHOR("Gabor Juhos <[email protected]>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" GPIO_LATCH_DRIVER_NAME);

target/linux/ar71xx/files/include/linux/platform_data/gpio-latch.h

@@ -0,0 +1,14 @@
+#ifndef _GPIO_LATCH_H_
+#define _GPIO_LATCH_H_
+
+#define GPIO_LATCH_DRIVER_NAME	"gpio-latch"
+
+struct gpio_latch_platform_data {
+	int base;
+	int num_gpios;
+	int *gpios;
+	int le_gpio_index;
+	bool le_active_low;
+};
+
+#endif /* _GPIO_LATCH_H_ */

target/linux/ar71xx/patches-3.10/452-gpio-add-gpio-latch-driver.patch

@@ -0,0 +1,22 @@
+--- a/drivers/gpio/Kconfig
++++ b/drivers/gpio/Kconfig
+@@ -725,4 +725,9 @@ config GPIO_NXP_74HC153
+ 	  Platform driver for NXP 74HC153 Dual 4-input Multiplexer. This
+ 	  provides a GPIO interface supporting input mode only.
+ 
++config GPIO_LATCH
++	tristate "GPIO latch driver"
++	help
++	  Say yes here to enable a GPIO latch driver.
++
+ endif
+--- a/drivers/gpio/Makefile
++++ b/drivers/gpio/Makefile
+@@ -31,6 +31,7 @@ obj-$(CONFIG_GPIO_IT8761E)	+= gpio-it876
+ obj-$(CONFIG_GPIO_JANZ_TTL)	+= gpio-janz-ttl.o
+ obj-$(CONFIG_ARCH_KS8695)	+= gpio-ks8695.o
+ obj-$(CONFIG_GPIO_LANGWELL)	+= gpio-langwell.o
++obj-$(CONFIG_GPIO_LATCH)	+= gpio-latch.o
+ obj-$(CONFIG_ARCH_LPC32XX)	+= gpio-lpc32xx.o
+ obj-$(CONFIG_GPIO_LYNXPOINT)	+= gpio-lynxpoint.o
+ obj-$(CONFIG_GPIO_MAX730X)	+= gpio-max730x.o