ar71xx: add kernel support for the OpenMesh MR1750 board

Signed-off-by: Sven Eckelmann <[email protected]>

SVN-Revision: 46926

target/linux/ar71xx/config-4.1

@@ -82,6 +82,7 @@ CONFIG_ATH79_MACH_JWAP003=y
 CONFIG_ATH79_MACH_MC_MAC1200R=y
 CONFIG_ATH79_MACH_MR12=y
 CONFIG_ATH79_MACH_MR16=y
+CONFIG_ATH79_MACH_MR1750=y
 CONFIG_ATH79_MACH_MR600=y
 CONFIG_ATH79_MACH_MR900=y
 CONFIG_ATH79_MACH_MYNET_N600=y

target/linux/ar71xx/files/arch/mips/ath79/mach-mr1750.c

@@ -0,0 +1,129 @@
+/*
+ * MR1750 board support
+ *
+ * Copyright (c) 2012 Qualcomm Atheros
+ * Copyright (c) 2012-2013 Marek Lindner <[email protected]>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/ar8216_platform.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-eth.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define MR1750_GPIO_LED_LAN		12
+#define MR1750_GPIO_LED_WLAN_2G		13
+#define MR1750_GPIO_LED_STATUS_GREEN	19
+#define MR1750_GPIO_LED_STATUS_RED	21
+#define MR1750_GPIO_LED_POWER		22
+#define MR1750_GPIO_LED_WLAN_5G		23
+
+#define MR1750_GPIO_BTN_RESET		17
+
+#define MR1750_KEYS_POLL_INTERVAL	20	/* msecs */
+#define MR1750_KEYS_DEBOUNCE_INTERVAL	(3 * MR1750_KEYS_POLL_INTERVAL)
+
+#define MR1750_MAC0_OFFSET		0
+#define MR1750_WMAC_CALDATA_OFFSET	0x1000
+
+static struct gpio_led mr1750_leds_gpio[] __initdata = {
+	{
+		.name		= "mr1750:blue:power",
+		.gpio		= MR1750_GPIO_LED_POWER,
+		.active_low	= 1,
+	},
+	{
+		.name		= "mr1750:blue:wan",
+		.gpio		= MR1750_GPIO_LED_LAN,
+		.active_low	= 1,
+	},
+	{
+		.name		= "mr1750:blue:wlan24",
+		.gpio		= MR1750_GPIO_LED_WLAN_2G,
+		.active_low	= 1,
+	},
+	{
+		.name		= "mr1750:blue:wlan58",
+		.gpio		= MR1750_GPIO_LED_WLAN_5G,
+		.active_low	= 1,
+	},
+	{
+		.name		= "mr1750:green:status",
+		.gpio		= MR1750_GPIO_LED_STATUS_GREEN,
+		.active_low	= 1,
+	},
+	{
+		.name		= "mr1750:red:status",
+		.gpio		= MR1750_GPIO_LED_STATUS_RED,
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_button mr1750_gpio_keys[] __initdata = {
+	{
+		.desc		= "Reset button",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.debounce_interval = MR1750_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= MR1750_GPIO_BTN_RESET,
+		.active_low	= 1,
+	},
+};
+
+static void __init mr1750_setup(void)
+{
+	u8 *art = (u8 *)KSEG1ADDR(0x1fff0000);
+	u8 mac[6];
+
+	ath79_eth0_pll_data.pll_1000 = 0xbe000101;
+	ath79_eth0_pll_data.pll_100 = 0x80000101;
+	ath79_eth0_pll_data.pll_10 = 0x80001313;
+
+	ath79_register_m25p80(NULL);
+
+	ath79_register_leds_gpio(-1, ARRAY_SIZE(mr1750_leds_gpio),
+				 mr1750_leds_gpio);
+	ath79_register_gpio_keys_polled(-1, MR1750_KEYS_POLL_INTERVAL,
+					ARRAY_SIZE(mr1750_gpio_keys),
+					mr1750_gpio_keys);
+
+	ath79_init_mac(mac, art + MR1750_MAC0_OFFSET, 1);
+	ath79_register_wmac(art + MR1750_WMAC_CALDATA_OFFSET, mac);
+	ath79_register_pci();
+
+	ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
+	ath79_register_mdio(0, 0x0);
+
+	ath79_init_mac(ath79_eth0_data.mac_addr, art + MR1750_MAC0_OFFSET, 0);
+
+	/* GMAC0 is connected to the RMGII interface */
+	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+	ath79_eth0_data.phy_mask = BIT(5);
+	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+
+	ath79_register_eth(0);
+}
+
+MIPS_MACHINE(ATH79_MACH_MR1750, "MR1750", "OpenMesh MR1750", mr1750_setup);

target/linux/ar71xx/patches-4.1/815-MIPS-ath79-add-mr1750-support.patch

@@ -0,0 +1,39 @@
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -763,6 +763,16 @@ config ATH79_MACH_CAP4200AG
+ 	select ATH79_DEV_M25P80
+ 	select ATH79_DEV_WMAC
+ 
++config ATH79_MACH_MR1750
++	bool "OpenMesh MR1750 board support"
++	select SOC_QCA955X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++
+ config ATH79_MACH_MR900
+ 	bool "OpenMesh MR900 board support"
+ 	select SOC_QCA955X
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -80,6 +80,7 @@ obj-$(CONFIG_ATH79_MACH_HORNET_UB)	+= ma
+ obj-$(CONFIG_ATH79_MACH_MC_MAC1200R)     += mach-mc-mac1200r.o
+ obj-$(CONFIG_ATH79_MACH_MR12)		+= mach-mr12.o
+ obj-$(CONFIG_ATH79_MACH_MR16)		+= mach-mr16.o
++obj-$(CONFIG_ATH79_MACH_MR1750)		+= mach-mr1750.o
+ obj-$(CONFIG_ATH79_MACH_MR600)		+= mach-mr600.o
+ obj-$(CONFIG_ATH79_MACH_MR900)		+= mach-mr900.o
+ obj-$(CONFIG_ATH79_MACH_MYNET_N600)	+= mach-mynet-n600.o
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -69,6 +69,7 @@ enum ath79_mach_type {
+ 	ATH79_MACH_HORNET_UB,		/* ALFA Networks Hornet-UB */
+ 	ATH79_MACH_MR12,		/* Cisco Meraki MR12 */
+ 	ATH79_MACH_MR16,		/* Cisco Meraki MR16 */
++	ATH79_MACH_MR1750,		/* OpenMesh MR1750 */
+ 	ATH79_MACH_MR600V2,		/* OpenMesh MR600v2 */
+ 	ATH79_MACH_MR600,		/* OpenMesh MR600 */
+ 	ATH79_MACH_MR900,		/* OpenMesh MR900 */