generic-2.6: add ip175c stuff for 2.6.29

SVN-Revision: 15505

target/linux/generic-2.6/config-2.6.29

@@ -654,6 +654,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_NOOP=y
 # CONFIG_IP1000 is not set
+# CONFIG_IP175C_PHY is not set
 # CONFIG_IP6_NF_FILTER is not set
 # CONFIG_IP6_NF_IPTABLES is not set
 # CONFIG_IP6_NF_MANGLE is not set

target/linux/generic-2.6/patches-2.6.29/670-phy_ip175c.patch

@@ -0,0 +1,23 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -96,6 +96,10 @@ config ADM6996_PHY
+ config MVSWITCH_PHY
+ 	tristate "Driver for Marvell 88E6060 switches"
+ 
++config IP175C_PHY
++	tristate "Driver for IC+ IP175C/IP178C switches"
++	select SWCONFIG
++
+ config FIXED_PHY
+ 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ 	depends on PHYLIB=y
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -15,6 +15,7 @@ obj-$(CONFIG_BROADCOM_PHY)	+= broadcom.o
+ obj-$(CONFIG_ICPLUS_PHY)	+= icplus.o
+ obj-$(CONFIG_ADM6996_PHY)	+= adm6996.o
+ obj-$(CONFIG_MVSWITCH_PHY)	+= mvswitch.o
++obj-$(CONFIG_IP175C_PHY)	+= ip175c.o
+ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o

target/linux/generic-2.6/patches-2.6.29/680-phy_ar8216.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -84,6 +84,10 @@ config IP175C_PHY
+@@ -100,6 +100,10 @@ config IP175C_PHY
  	tristate "Driver for IC+ IP175C/IP178C switches"
  	select SWCONFIG
  
@@ -19,5 +19,5 @@
  obj-$(CONFIG_IP175C_PHY)	+= ip175c.o
 +obj-$(CONFIG_AR8216_PHY)	+= ar8216.o
  obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
  obj-$(CONFIG_FIXED_PHY)		+= fixed.o
- obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o