mvebu: Add turris-omnia.bootscript

In contrast to the U-Boot version shipped with older versions of Turris
Omnia (CZ11NIC13, CZ11NIC20), the version shipped with Turris Omnia 2019
(CZ11NIC23) relies on the existence of /boot.scr.

Consequently, add a suitable boot script to the sysupgrade image.

Flash instructions for Turris Omnia 2019:
- Download openwrt-...-sysupgrade.img.gz, gunzip it, and copy the resulting
  .img file to the root of a USB flash drive (FAT32 or ext2/3/4).
- Enter a rescue shell: Either via 5-LED reset and ssh [email protected]
  on LAN port 4, or via 7-LED reset and the serial console.
- Insert the USB drive and mount it:
  mkdir /mnt; mount /dev/sda1 /mnt
- Flash the OpenWrt image to eMMC:
  dd if=/mnt/openwrt-...-sysupgrade.img of=/dev/mmcblk0 bs=4096 conv=fsync
- Reboot.

Flash instructions using a temporary "medkit" installation were written for
the older versions of Turris Omnia, and will *not* work on the Turris Omnia
2019.

Signed-off-by: Klaus Kudielka <[email protected]>
Reviewed-by: Tomasz Maciej Nowak <[email protected]>
Tested-by: W. Michael Petullo <[email protected]> (Turris Omnia "2020")

target/linux/mvebu/image/cortexa9.mk

@@ -39,11 +39,12 @@ define Device/cznic_turris-omnia
     wpad-basic-wolfssl kmod-ath9k kmod-ath10k-ct ath10k-firmware-qca988x-ct \
     partx-utils kmod-i2c-mux-pca954x
   IMAGES := $$(IMAGE_PREFIX)-sysupgrade.img.gz omnia-medkit-$$(IMAGE_PREFIX)-initramfs.tar.gz
-  IMAGE/$$(IMAGE_PREFIX)-sysupgrade.img.gz := boot-img | sdcard-img | gzip | append-metadata
+  IMAGE/$$(IMAGE_PREFIX)-sysupgrade.img.gz := boot-scr | boot-img | sdcard-img | gzip | append-metadata
   IMAGE/omnia-medkit-$$(IMAGE_PREFIX)-initramfs.tar.gz := omnia-medkit-initramfs | gzip
   IMAGE_NAME = $$(2)
   SOC := armada-385
   SUPPORTED_DEVICES += armada-385-turris-omnia
+  BOOT_SCRIPT := turris-omnia
 endef
 TARGET_DEVICES += cznic_turris-omnia
 

target/linux/mvebu/image/turris-omnia.bootscript

@@ -0,0 +1,17 @@
+# Determine root device
+setexpr rootpart ${distro_bootpart} + 1
+if test ${devtype} = mmc -a ${devnum} = 0; then
+	setenv rootdev /dev/mmcblk0p${rootpart}
+elif test ${devtype} = scsi -a ${devnum} = 0; then
+	setenv rootdev /dev/sda${rootpart}
+else
+	# New U-Boot only
+	part uuid ${devtype} ${devnum}:${rootpart} uuid
+	setenv rootdev PARTUUID=${uuid}
+fi
+setenv bootargs earlyprintk console=ttyS0,115200 root=${rootdev} rootfstype=auto rootwait
+
+# Load and boot
+load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r} @[email protected]
+load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} zImage
+bootz ${kernel_addr_r} - ${fdt_addr_r}