ath79: drop redundant status for gpio target-wide

All definitions of gpio in SoC DTSI files do not set status, i.e.
have it enabled. This drops all remaining redundant "status = okay"
definitions in descendent files (mostly older ones).

Signed-off-by: Adrian Schmutzler <[email protected]>

target/linux/ath79/dts/ar7241_tplink.dtsi

@@ -109,10 +109,6 @@
 	mtd-mac-address-increment = <1>;
 };
 
-&gpio {
-	status = "okay";
-};
-
 &uart {
 	status = "okay";
 };

target/linux/ath79/dts/ar7241_tplink_tl-wr842n-v1.dts

@@ -156,10 +156,6 @@
 	mtd-mac-address-increment = <1>;
 };
 
-&gpio {
-	status = "okay";
-};
-
 &uart {
 	status = "okay";
 };

target/linux/ath79/dts/ar9341_pcs_cr3000.dts

@@ -89,10 +89,6 @@
 	status = "okay";
 };
 
-&gpio {
-	status = "okay";
-};
-
 &spi {
 	num-cs = <1>;
 

target/linux/ath79/dts/ar9341_pisen_wmb001n.dts

@@ -134,10 +134,6 @@
 	status = "okay";
 };
 
-&gpio {
-	status = "okay";
-};
-
 &spi {
 	num-cs = <1>;
 

target/linux/ath79/dts/ar9342_ubnt_wa.dtsi

@@ -29,10 +29,6 @@
 	status = "okay";
 };
 
-&gpio {
-	status = "okay";
-};
-
 &pcie {
 	status = "okay";
 };

target/linux/ath79/dts/ar9342_ubnt_xw.dtsi

@@ -61,10 +61,6 @@
 	status = "okay";
 };
 
-&gpio {
-	status = "okay";
-};
-
 &spi {
 	status = "okay";
 	num-cs = <1>;

target/linux/ath79/dts/ar9344_aerohive_hiveap-121.dts

@@ -71,8 +71,6 @@
 };
 
 &gpio {
-	status = "okay";
-
 	pinctrl-names = "default";
 	pinctrl-0 = <&jtag_disable_pins>;
 

target/linux/ath79/dts/ar9344_devolo_magic-2-wifi.dts

@@ -65,8 +65,6 @@
 };
 
 &gpio {
-	status = "okay";
-
 	wlan_power {
 		gpio-hog;
 		line-name = "WLAN power";

target/linux/ath79/dts/ar9344_enterasys_ws-ap3705i.dts

@@ -111,10 +111,6 @@
 	};
 };
 
-&gpio {
-	status = "okay";
-};
-
 &wmac {
 	status = "okay";
 	qca,no-eeprom;

target/linux/ath79/dts/ar9344_netgear_wndr.dtsi

@@ -240,8 +240,6 @@
 };
 
 &gpio {
-	status = "okay";
-
 	lna0 {
 		gpio-hog;
 		line-name = "netgear:ext:lna0";

target/linux/ath79/dts/ar9344_ocedo_raccoon.dts

@@ -71,10 +71,6 @@
 	status = "okay";
 };
 
-&gpio {
-	status = "okay";
-};
-
 &spi {
 	status = "okay";
 

target/linux/ath79/dts/ar9344_pcs_cap324.dts

@@ -78,10 +78,6 @@
 	status = "okay";
 };
 
-&gpio {
-	status = "okay";
-};
-
 &spi {
 	status = "okay";
 

target/linux/ath79/dts/ar9344_pcs_cr5000.dts

@@ -70,10 +70,6 @@
 	status = "okay";
 };
 
-&gpio {
-	status = "okay";
-};
-
 &spi {
 	status = "okay";
 

target/linux/ath79/dts/ar9344_qihoo_c301.dts

@@ -82,8 +82,6 @@
 };
 
 &gpio {
-	status = "okay";
-
 	gpio_ext_lna0 {
 		gpio-hog;
 		gpios = <14 0>;

target/linux/ath79/dts/ar9344_wd_mynet-n750.dts

@@ -69,8 +69,6 @@
 };
 
 &gpio {
-	status = "okay";
-
 	gpio_ext_lna0 {
 		gpio-hog;
 		gpios = <15 0>;

target/linux/ath79/dts/ar9344_zbtlink_zbt-wd323.dts

@@ -78,8 +78,6 @@
 };
 
 &gpio {
-	status = "okay";
-
 	pinctrl-names = "default";
 	pinctrl-0 = <&jtag_disable_pins>;
 };

target/linux/ath79/dts/qca9558_devolo_dvl1xxx.dtsi

@@ -44,10 +44,6 @@
 	status = "okay";
 };
 
-&gpio {
-	status = "okay";
-};
-
 &spi {
 	status = "okay";
 

target/linux/ath79/dts/qca9558_librerouter_librerouter-v1.dts

@@ -80,10 +80,6 @@
 	status = "okay";
 };
 
-&gpio {
-	status = "okay";
-};
-
 &usb_phy0 {
 	status = "okay";
 };

target/linux/ath79/dts/qca9558_tplink_archer-c.dtsi

@@ -85,10 +85,6 @@
 	status = "okay";
 };
 
-&gpio {
-	status = "okay";
-};
-
 &usb_phy0 {
 	status = "okay";
 };

target/linux/ath79/dts/qca9558_tplink_rex5x.dtsi

@@ -104,10 +104,6 @@
 	status = "okay";
 };
 
-&gpio {
-	status = "okay";
-};
-
 &spi {
 	status = "okay";
 	num-cs = <1>;

target/linux/ath79/dts/qca9558_tplink_tl-wr1043nd.dtsi

@@ -76,10 +76,6 @@
 	status = "okay";
 };
 
-&gpio {
-	status = "okay";
-};
-
 &usb_phy0 {
 	status = "okay";
 };

target/linux/ath79/dts/qca9558_trendnet_tew-823dru.dts

@@ -72,10 +72,6 @@
 	status = "okay";
 };
 
-&gpio {
-	status = "okay";
-};
-
 &usb_phy0 {
 	status = "okay";
 };

target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts

@@ -255,10 +255,6 @@
 	};
 };
 
-&gpio {
-	status = "okay";
-};
-
 &wmac {
 	status = "okay";
 

target/linux/ath79/dts/qca9561_avm_fritz4020.dts

@@ -100,10 +100,6 @@
 	status = "okay";
 };
 
-&gpio {
-	status = "okay";
-};
-
 &spi {
 	status = "okay";
 

target/linux/ath79/dts/qca9561_tplink_archer-c5x.dtsi

@@ -121,10 +121,6 @@
 	status = "okay";
 };
 
-&gpio {
-	status = "okay";
-};
-
 &pcie {
 	status = "okay";
 };

target/linux/ath79/dts/qca9561_xiaomi_mi-router-4q.dts

@@ -57,10 +57,6 @@
 	status = "okay";
 };
 
-&gpio {
-	status = "okay";
-};
-
 &spi {
 	status = "okay";
 	num-cs = <1>;

target/linux/ath79/dts/qca9563_dlink_dir-859-a1.dts

@@ -74,10 +74,6 @@
 	status = "okay";
 };
 
-&gpio {
-	status = "okay";
-};
-
 &pcie {
 	status = "okay";
 };

target/linux/ath79/dts/qca9563_phicomm_k2t.dts

@@ -51,10 +51,6 @@
 	status = "okay";
 };
 
-&gpio {
-	status = "okay";
-};
-
 &pcie {
 	status = "okay";
 };

target/linux/ath79/dts/qca9563_rosinson_wr818.dts

@@ -48,10 +48,6 @@
 	status = "okay";
 };
 
-&gpio {
-	status = "okay";
-};
-
 &spi {
 	status = "okay";
 

target/linux/ath79/dts/qca9563_tplink_archer-c2-v3.dts

@@ -145,10 +145,6 @@
 	};
 };
 
-&gpio {
-	status = "okay";
-};
-
 &mdio0 {
 	status = "okay";
 

target/linux/ath79/dts/qca9563_tplink_archer-c7-v4.dts

@@ -152,10 +152,6 @@
 	status = "okay";
 };
 
-&gpio {
-	status = "okay";
-};
-
 &usb_phy0 {
 	status = "okay";
 };

target/linux/ath79/dts/qca9563_tplink_archer-x6-v2.dtsi

@@ -19,10 +19,6 @@
 	status = "okay";
 };
 
-&gpio {
-	status = "okay";
-};
-
 &mdio0 {
 	status = "okay";
 

target/linux/ath79/dts/qca9563_tplink_archer-x7-v5.dtsi

@@ -108,10 +108,6 @@
 	status = "okay";
 };
 
-&gpio {
-	status = "okay";
-};
-
 &usb_phy0 {
 	status = "okay";
 };

target/linux/ath79/dts/qca9563_tplink_re450.dtsi

@@ -112,10 +112,6 @@
 	status = "okay";
 };
 
-&gpio {
-	status = "okay";
-};
-
 &spi {
 	status = "okay";
 

target/linux/ath79/dts/qca9563_tplink_tl-wr1043n.dtsi

@@ -88,10 +88,6 @@
 	status = "okay";
 };
 
-&gpio {
-	status = "okay";
-};
-
 &mdio0 {
 	status = "okay";
 

target/linux/ath79/dts/qca9563_ubnt_unifiac.dtsi

@@ -43,10 +43,6 @@
 	status = "okay";
 };
 
-&gpio {
-	status = "okay";
-};
-
 &pcie {
 	status = "okay";
 };

target/linux/ath79/dts/qca9563_yuncore_xd4200.dtsi

@@ -31,10 +31,6 @@
 	phy-handle = <&phy0>;
 };
 
-&gpio {
-	status = "okay";
-};
-
 &mdio0 {
 	status = "okay";