|
|
@@ -0,0 +1,371 @@
|
|
|
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
+/* Copyright (c) 2020, Robert Marko <[email protected]> */
|
|
|
+
|
|
|
+#include "qcom-ipq4019.dtsi"
|
|
|
+#include <dt-bindings/gpio/gpio.h>
|
|
|
+#include <dt-bindings/input/input.h>
|
|
|
+#include <dt-bindings/soc/qcom,tcsr.h>
|
|
|
+
|
|
|
+/ {
|
|
|
+ model = "Netgear WAC510";
|
|
|
+ compatible = "netgear,wac510";
|
|
|
+
|
|
|
+ aliases {
|
|
|
+ led-boot = &led_power_amber;
|
|
|
+ led-failsafe = &led_power_amber;
|
|
|
+ led-running = &led_power_green;
|
|
|
+ led-upgrade = &led_power_amber;
|
|
|
+ label-mac-device = &gmac0;
|
|
|
+ };
|
|
|
+
|
|
|
+ chosen {
|
|
|
+ bootargs-append = " root=/dev/ubiblock0_1";
|
|
|
+ };
|
|
|
+
|
|
|
+ soc {
|
|
|
+ rng@22000 {
|
|
|
+ status = "okay";
|
|
|
+ };
|
|
|
+
|
|
|
+ ess-psgmii@98000 {
|
|
|
+ status = "okay";
|
|
|
+ };
|
|
|
+
|
|
|
+ counter@4a1000 {
|
|
|
+ compatible = "qcom,qca-gcnt";
|
|
|
+ reg = <0x4a1000 0x4>;
|
|
|
+ };
|
|
|
+
|
|
|
+ tcsr@1949000 {
|
|
|
+ compatible = "qcom,tcsr";
|
|
|
+ reg = <0x1949000 0x100>;
|
|
|
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
|
|
|
+ };
|
|
|
+
|
|
|
+ tcsr@194b000 {
|
|
|
+ status = "okay";
|
|
|
+
|
|
|
+ compatible = "qcom,tcsr";
|
|
|
+ reg = <0x194b000 0x100>;
|
|
|
+ qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
|
|
|
+ };
|
|
|
+
|
|
|
+ ess_tcsr@1953000 {
|
|
|
+ compatible = "qcom,tcsr";
|
|
|
+ reg = <0x1953000 0x1000>;
|
|
|
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
|
|
|
+ };
|
|
|
+
|
|
|
+ tcsr@1957000 {
|
|
|
+ compatible = "qcom,tcsr";
|
|
|
+ reg = <0x1957000 0x100>;
|
|
|
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
|
|
|
+ };
|
|
|
+
|
|
|
+ usb2: usb2@60f8800 {
|
|
|
+ status = "okay";
|
|
|
+ };
|
|
|
+
|
|
|
+ usb3: usb3@8af8800 {
|
|
|
+ status = "okay";
|
|
|
+ };
|
|
|
+
|
|
|
+ crypto@8e3a000 {
|
|
|
+ status = "okay";
|
|
|
+ };
|
|
|
+
|
|
|
+ watchdog@b017000 {
|
|
|
+ status = "okay";
|
|
|
+ };
|
|
|
+
|
|
|
+ ess-switch@c000000 {
|
|
|
+ status = "okay";
|
|
|
+ };
|
|
|
+
|
|
|
+ edma@c080000 {
|
|
|
+ status = "okay";
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ keys {
|
|
|
+ compatible = "gpio-keys";
|
|
|
+
|
|
|
+ reset {
|
|
|
+ label = "reset";
|
|
|
+ gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
|
|
|
+ linux,code = <KEY_RESTART>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ led_spi {
|
|
|
+ compatible = "spi-gpio";
|
|
|
+ #address-cells = <1>;
|
|
|
+ #size-cells = <0>;
|
|
|
+
|
|
|
+ sck-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
|
|
|
+ mosi-gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
|
|
|
+ num-chipselects = <0>;
|
|
|
+
|
|
|
+ ssr: ssr@0 {
|
|
|
+ compatible = "fairchild,74hc595";
|
|
|
+ reg = <0>;
|
|
|
+ gpio-controller;
|
|
|
+ #gpio-cells = <2>;
|
|
|
+ registers-number = <1>;
|
|
|
+ spi-max-frequency = <1000000>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ leds {
|
|
|
+ compatible = "gpio-leds";
|
|
|
+
|
|
|
+ led_power_amber: power_amber {
|
|
|
+ label = "amber:power";
|
|
|
+ gpios = <&ssr 6 GPIO_ACTIVE_LOW>;
|
|
|
+ panic-indicator;
|
|
|
+ };
|
|
|
+
|
|
|
+ led_power_green: power_green {
|
|
|
+ label = "green:power";
|
|
|
+ gpios = <&ssr 5 GPIO_ACTIVE_LOW>;
|
|
|
+ };
|
|
|
+
|
|
|
+ wlan2g_blue {
|
|
|
+ label = "blue:wlan2g";
|
|
|
+ gpios = <&ssr 4 GPIO_ACTIVE_LOW>;
|
|
|
+ linux,default-trigger = "phy0tpt";
|
|
|
+ };
|
|
|
+
|
|
|
+ wlan2g_green {
|
|
|
+ label = "green:wlan2g";
|
|
|
+ gpios = <&ssr 3 GPIO_ACTIVE_LOW>;
|
|
|
+ linux,default-trigger = "phy0radio";
|
|
|
+ };
|
|
|
+
|
|
|
+ wlan5g_blue {
|
|
|
+ label = "blue:wlan5g";
|
|
|
+ gpios = <&ssr 2 GPIO_ACTIVE_LOW>;
|
|
|
+ linux,default-trigger = "phy1tpt";
|
|
|
+ };
|
|
|
+
|
|
|
+ wlan5g_green {
|
|
|
+ label = "green:wlan5g";
|
|
|
+ gpios = <&ssr 1 GPIO_ACTIVE_LOW>;
|
|
|
+ linux,default-trigger = "phy1radio";
|
|
|
+ };
|
|
|
+
|
|
|
+ act_green {
|
|
|
+ label = "green:act";
|
|
|
+ gpios = <&ssr 0 GPIO_ACTIVE_LOW>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&qpic_bam {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&tlmm {
|
|
|
+ mdio_pins: mdio_pinmux {
|
|
|
+ mux_1 {
|
|
|
+ pins = "gpio53";
|
|
|
+ function = "mdio";
|
|
|
+ bias-pull-up;
|
|
|
+ };
|
|
|
+
|
|
|
+ mux_2 {
|
|
|
+ pins = "gpio52";
|
|
|
+ function = "mdc";
|
|
|
+ bias-pull-up;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ serial_pins: serial_pinmux {
|
|
|
+ mux {
|
|
|
+ pins = "gpio60", "gpio61";
|
|
|
+ function = "blsp_uart0";
|
|
|
+ bias-disable;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ spi_0_pins: spi_0_pinmux {
|
|
|
+ pinmux {
|
|
|
+ function = "blsp_spi0";
|
|
|
+ pins = "gpio55", "gpio56", "gpio57";
|
|
|
+ drive-strength = <12>;
|
|
|
+ bias-disable;
|
|
|
+ };
|
|
|
+
|
|
|
+ pinmux_cs {
|
|
|
+ function = "gpio";
|
|
|
+ pins = "gpio54", "gpio59";
|
|
|
+ drive-strength = <2>;
|
|
|
+ bias-disable;
|
|
|
+ output-high;
|
|
|
+ };
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&blsp_dma {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&blsp1_spi1 {
|
|
|
+ status = "okay";
|
|
|
+
|
|
|
+ pinctrl-0 = <&spi_0_pins>;
|
|
|
+ pinctrl-names = "default";
|
|
|
+ cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
|
|
|
+ <&tlmm 59 GPIO_ACTIVE_HIGH>;
|
|
|
+
|
|
|
+ flash@0 {
|
|
|
+ compatible = "jedec,spi-nor";
|
|
|
+ spi-max-frequency = <50000000>;
|
|
|
+ reg = <0>;
|
|
|
+
|
|
|
+ partitions {
|
|
|
+ compatible = "fixed-partitions";
|
|
|
+ #address-cells = <1>;
|
|
|
+ #size-cells = <1>;
|
|
|
+
|
|
|
+ partition@0 {
|
|
|
+ label = "0:SBL1";
|
|
|
+ reg = <0x00000000 0x00040000>;
|
|
|
+ read-only;
|
|
|
+ };
|
|
|
+
|
|
|
+ partition@40000 {
|
|
|
+ label = "0:MIBIB";
|
|
|
+ reg = <0x00040000 0x00020000>;
|
|
|
+ read-only;
|
|
|
+ };
|
|
|
+
|
|
|
+ partition@60000 {
|
|
|
+ label = "0:QSEE";
|
|
|
+ reg = <0x00060000 0x00060000>;
|
|
|
+ read-only;
|
|
|
+ };
|
|
|
+
|
|
|
+ partition@c0000 {
|
|
|
+ label = "0:CDT";
|
|
|
+ reg = <0x000c0000 0x00010000>;
|
|
|
+ read-only;
|
|
|
+ };
|
|
|
+
|
|
|
+ partition@d0000 {
|
|
|
+ label = "0:DDRPARAMS";
|
|
|
+ reg = <0x000d0000 0x00010000>;
|
|
|
+ read-only;
|
|
|
+ };
|
|
|
+
|
|
|
+ partition@e0000 {
|
|
|
+ label = "0:APPSBLENV";
|
|
|
+ reg = <0x000e0000 0x00010000>;
|
|
|
+ };
|
|
|
+
|
|
|
+ partition@f0000 {
|
|
|
+ label = "0:APPSBL";
|
|
|
+ reg = <0x000f0000 0x000f0000>;
|
|
|
+ read-only;
|
|
|
+ };
|
|
|
+
|
|
|
+ partition@1e0000 {
|
|
|
+ label = "0:MANUDATA";
|
|
|
+ reg = <0x001e0000 0x00010000>;
|
|
|
+ read-only;
|
|
|
+ };
|
|
|
+
|
|
|
+ partition@1f0000 {
|
|
|
+ label = "0:ART";
|
|
|
+ reg = <0x001f0000 0x00010000>;
|
|
|
+ read-only;
|
|
|
+ };
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ nand@1 {
|
|
|
+ compatible = "spi-nand";
|
|
|
+ reg = <1>;
|
|
|
+ spi-max-frequency = <48000000>;
|
|
|
+
|
|
|
+ partitions {
|
|
|
+ compatible = "fixed-partitions";
|
|
|
+ #address-cells = <1>;
|
|
|
+ #size-cells = <1>;
|
|
|
+
|
|
|
+ partition@0 {
|
|
|
+ label = "rootfs";
|
|
|
+ reg = <0x00000000 0x03800000>;
|
|
|
+ };
|
|
|
+
|
|
|
+ partition@3800000 {
|
|
|
+ label = "rootfs_1";
|
|
|
+ reg = <0x03800000 0x03800000>;
|
|
|
+ };
|
|
|
+
|
|
|
+ partition@7000000 {
|
|
|
+ label = "var_config";
|
|
|
+ reg = <0x07000000 0x00f00000>;
|
|
|
+ read-only;
|
|
|
+ };
|
|
|
+
|
|
|
+ partition@7f00000 {
|
|
|
+ label = "Oops_log";
|
|
|
+ reg = <0x07f00000 0x000c0000>;
|
|
|
+ read-only;
|
|
|
+ };
|
|
|
+ };
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&blsp1_uart1 {
|
|
|
+ status = "okay";
|
|
|
+
|
|
|
+ pinctrl-0 = <&serial_pins>;
|
|
|
+ pinctrl-names = "default";
|
|
|
+};
|
|
|
+
|
|
|
+&cryptobam {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&mdio {
|
|
|
+ status = "okay";
|
|
|
+
|
|
|
+ pinctrl-0 = <&mdio_pins>;
|
|
|
+ pinctrl-names = "default";
|
|
|
+ reset-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
|
|
|
+ reset-delay-us = <2000>;
|
|
|
+};
|
|
|
+
|
|
|
+&gmac0 {
|
|
|
+ qcom,forced_duplex = <1>;
|
|
|
+ qcom,forced_speed = <1000>;
|
|
|
+ qcom,phy_mdio_addr = <3>;
|
|
|
+ qcom,poll_required = <1>;
|
|
|
+ vlan_tag = <1 0x10>;
|
|
|
+};
|
|
|
+
|
|
|
+&wifi0 {
|
|
|
+ status = "okay";
|
|
|
+
|
|
|
+ qcom,ath10k-calibration-variant = "Netgear-WAC510";
|
|
|
+};
|
|
|
+
|
|
|
+&wifi1 {
|
|
|
+ status = "okay";
|
|
|
+
|
|
|
+ qcom,ath10k-calibration-variant = "Netgear-WAC510";
|
|
|
+};
|
|
|
+
|
|
|
+&usb3_ss_phy {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&usb3_hs_phy {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&usb2_hs_phy {
|
|
|
+ status = "okay";
|
|
|
+};
|
Robert Marko