brcm63xx: Add support for Comtrend VR-3025un

Signed-off-by: Álvaro Fernández Rojas <[email protected]>
Signed-off-by: José Vázquez Fernández <[email protected]>
Signed-off-by: Jonas Gorski <[email protected]>

SVN-Revision: 41848

target/linux/brcm63xx/base-files/etc/uci-defaults/02_network

@@ -81,6 +81,7 @@ DVG3810BN)
 96328A-1441N1 |\
 963281TAN |\
 963281T_TEF |\
+96368M-1341N |\
 96368M-1541N |\
 96368MVNgr |\
 "F@ST2504n" |\

target/linux/brcm63xx/base-files/etc/uci-defaults/09_fix_crc

@@ -19,6 +19,7 @@ case "$board_name" in
 	963281TAN |\
 	963281T_TEF |\
 	96358-502V |\
+	96368M-1341N |\
 	96368M-1541N |\
 	96369R-1231N |\
 	AW4339U |\

target/linux/brcm63xx/base-files/lib/brcm63xx.sh

@@ -57,6 +57,11 @@ brcm63xx_detect() {
 		brcm63xx_has_reset_button="true"
 		ifname=eth0
 		;;
+	96368M-1341N)
+		brcm63xx_has_reset_button="true"
+		status_led="VR-3025un:green:power"
+		ifname="eth0"
+		;;
 	96368M-1541N)
 		brcm63xx_has_reset_button="true"
 		status_led="VR-3025u:green:power"

target/linux/brcm63xx/image/Makefile

@@ -232,6 +232,8 @@ define Image/Build
 	$(call Image/Build/CFE,$(1),96328A-1441N1,6328,AR-5387un,,--pad 8)
 	# Comtrend VR-3025u
 	$(call Image/Build/CFE,$(1),96368M-1541N,6368,VR-3025u,,--pad 16)
+	# Comtrend VR-3025un
+	$(call Image/Build/CFE,$(1),96368M-1341N,6368,VR-3025un,,--pad 4)
 	# Comtrend WAP-5813n
 	$(call Image/Build/CFE,$(1),96369R-1231N,6368,WAP-5813n,,--pad 4)
 	# Davolink DV201AMR

target/linux/brcm63xx/patches-3.10/563-board_VR-3025un.patch

@@ -0,0 +1,109 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -4542,6 +4542,98 @@ static struct board_info __initdata boar
+ 	},
+ };
+ 
++static struct board_info __initdata board_VR3025un = {
++	.name					= "96368M-1341N",
++	.expected_cpu_id		= 0x6368,
++
++	.has_uart0				= 1,
++	.has_pci				= 1,
++	.has_ohci0				= 1,
++	.has_ehci0				= 1,
++
++	.has_enetsw				= 1,
++	.enetsw = {
++		.used_ports = {
++			[0] = {
++				.used		= 1,
++				.phy_id		= 1,
++				.name		= "port1",
++			},
++			[1] = {
++				.used		= 1,
++				.phy_id		= 2,
++				.name		= "port2",
++			},
++			[2] = {
++				.used		= 1,
++				.phy_id		= 3,
++				.name		= "port3",
++			},
++			[3] = {
++				.used		= 1,
++				.phy_id		= 4,
++				.name		= "port4",
++			},
++		},
++	},
++
++	.leds = {
++		{
++			.name		= "VR-3025un:green:dsl",
++			.gpio		= 2,
++			.active_low	= 1,
++		},
++		{
++			.name		= "VR-3025un:green:inet",
++			.gpio		= 5,
++		},
++		{
++			.name		= "VR-3025un:green:lan1",
++			.gpio		= 6,
++			.active_low	= 1,
++		},
++		{
++			.name		= "VR-3025un:green:lan2",
++			.gpio		= 7,
++			.active_low	= 1,
++		},
++		{
++			.name		= "VR-3025un:green:lan3",
++			.gpio		= 8,
++			.active_low	= 1,
++		},
++		{
++			.name		= "VR-3025un:green:iptv",
++			.gpio		= 9,
++			.active_low	= 1,
++		},
++		{
++			.name		= "VR-3025un:green:power",
++			.gpio		= 22,
++			.default_trigger = "default-on",
++		},
++		{
++			.name		= "VR-3025un:red:power",
++			.gpio		= 24,
++		},
++		{
++			.name		= "VR-3025un:red:inet",
++			.gpio		= 31,
++		},
++	},
++
++	.buttons = {
++		{
++			.desc			= "reset",
++			.gpio			= 34,
++			.type			= EV_KEY,
++			.code			= KEY_RESTART,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++			.active_low		= 1,
++		},
++	},
++};
++
+ static struct b53_platform_data WAP5813n_b53_pdata = {
+ 	.alias = "eth0",
+ };
+@@ -5018,6 +5110,7 @@ static const struct board_info __initcon
+ 	&board_96368mvwg,
+ 	&board_96368mvngr,
+ 	&board_VR3025u,
++	&board_VR3025un,
+ 	&board_WAP5813n,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268

target/linux/brcm63xx/patches-3.14/563-board_VR-3025un.patch

@@ -0,0 +1,109 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -4552,6 +4552,98 @@ static struct board_info __initdata boar
+ 	},
+ };
+ 
++static struct board_info __initdata board_VR3025un = {
++	.name					= "96368M-1341N",
++	.expected_cpu_id		= 0x6368,
++
++	.has_uart0				= 1,
++	.has_pci				= 1,
++	.has_ohci0				= 1,
++	.has_ehci0				= 1,
++
++	.has_enetsw				= 1,
++	.enetsw = {
++		.used_ports = {
++			[0] = {
++				.used		= 1,
++				.phy_id		= 1,
++				.name		= "port1",
++			},
++			[1] = {
++				.used		= 1,
++				.phy_id		= 2,
++				.name		= "port2",
++			},
++			[2] = {
++				.used		= 1,
++				.phy_id		= 3,
++				.name		= "port3",
++			},
++			[3] = {
++				.used		= 1,
++				.phy_id		= 4,
++				.name		= "port4",
++			},
++		},
++	},
++
++	.leds = {
++		{
++			.name		= "VR-3025un:green:dsl",
++			.gpio		= 2,
++			.active_low	= 1,
++		},
++		{
++			.name		= "VR-3025un:green:inet",
++			.gpio		= 5,
++		},
++		{
++			.name		= "VR-3025un:green:lan1",
++			.gpio		= 6,
++			.active_low	= 1,
++		},
++		{
++			.name		= "VR-3025un:green:lan2",
++			.gpio		= 7,
++			.active_low	= 1,
++		},
++		{
++			.name		= "VR-3025un:green:lan3",
++			.gpio		= 8,
++			.active_low	= 1,
++		},
++		{
++			.name		= "VR-3025un:green:iptv",
++			.gpio		= 9,
++			.active_low	= 1,
++		},
++		{
++			.name		= "VR-3025un:green:power",
++			.gpio		= 22,
++			.default_trigger = "default-on",
++		},
++		{
++			.name		= "VR-3025un:red:power",
++			.gpio		= 24,
++		},
++		{
++			.name		= "VR-3025un:red:inet",
++			.gpio		= 31,
++		},
++	},
++
++	.buttons = {
++		{
++			.desc			= "reset",
++			.gpio			= 34,
++			.type			= EV_KEY,
++			.code			= KEY_RESTART,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++			.active_low		= 1,
++		},
++	},
++};
++
+ static struct b53_platform_data WAP5813n_b53_pdata = {
+ 	.alias = "eth0",
+ };
+@@ -5028,6 +5120,7 @@ static const struct board_info __initcon
+ 	&board_96368mvwg,
+ 	&board_96368mvngr,
+ 	&board_VR3025u,
++	&board_VR3025un,
+ 	&board_WAP5813n,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268