|
|
@@ -0,0 +1,218 @@
|
|
|
+--- a/arch/arm/mach-kirkwood/Makefile
|
|
|
++++ b/arch/arm/mach-kirkwood/Makefile
|
|
|
+@@ -8,6 +8,7 @@ obj-$(CONFIG_MACH_SHEEVAPLUG) += sheeva
|
|
|
+ obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG) += sheevaplug-setup.o
|
|
|
+ obj-$(CONFIG_MACH_GURUPLUG) += guruplug-setup.o
|
|
|
+ obj-$(CONFIG_MACH_DOCKSTAR) += dockstar-setup.o
|
|
|
++obj-$(CONFIG_MACH_ICONNECT) += iconnect-setup.o
|
|
|
+ obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o
|
|
|
+ obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o
|
|
|
+ obj-$(CONFIG_MACH_OPENRD) += openrd-setup.o
|
|
|
+--- a/arch/arm/mach-kirkwood/Kconfig
|
|
|
++++ b/arch/arm/mach-kirkwood/Kconfig
|
|
|
+@@ -130,6 +130,12 @@ config MACH_T5325
|
|
|
+ Say 'Y' here if you want your kernel to support the
|
|
|
+ HP t5325 Thin Client.
|
|
|
+
|
|
|
++config MACH_ICONNECT
|
|
|
++ bool "Iomega iConnect Wireless"
|
|
|
++ help
|
|
|
++ Say 'Y' here if you want your kernel to support the
|
|
|
++ Iomega iConnect Wireless.
|
|
|
++
|
|
|
+ endmenu
|
|
|
+
|
|
|
+ endif
|
|
|
+--- /dev/null
|
|
|
++++ b/arch/arm/mach-kirkwood/iconnect-setup.c
|
|
|
+@@ -0,0 +1,190 @@
|
|
|
++/*
|
|
|
++ * arch/arm/mach-kirkwood/iconnect-setup.c
|
|
|
++ *
|
|
|
++ * Iomega iConnect Wireless
|
|
|
++ *
|
|
|
++ * This file is licensed under the terms of the GNU General Public
|
|
|
++ * License version 2. This program is licensed "as is" without any
|
|
|
++ * warranty of any kind, whether express or implied.
|
|
|
++ */
|
|
|
++
|
|
|
++#include <linux/kernel.h>
|
|
|
++#include <linux/init.h>
|
|
|
++#include <linux/platform_device.h>
|
|
|
++#include <linux/irq.h>
|
|
|
++#include <linux/mtd/partitions.h>
|
|
|
++#include <linux/mv643xx_eth.h>
|
|
|
++#include <linux/ethtool.h>
|
|
|
++#include <linux/gpio.h>
|
|
|
++#include <linux/gpio_keys.h>
|
|
|
++#include <linux/input.h>
|
|
|
++#include <linux/leds.h>
|
|
|
++#include <asm/mach-types.h>
|
|
|
++#include <asm/mach/arch.h>
|
|
|
++#include <mach/kirkwood.h>
|
|
|
++#include "common.h"
|
|
|
++#include "mpp.h"
|
|
|
++
|
|
|
++static struct mtd_partition iconnect_nand_parts[] = {
|
|
|
++ {
|
|
|
++ .name = "u-boot",
|
|
|
++ .offset = 0,
|
|
|
++ .size = SZ_1M
|
|
|
++ }, {
|
|
|
++ .name = "uImage",
|
|
|
++ .offset = MTDPART_OFS_NXTBLK,
|
|
|
++ .size = SZ_1M + SZ_2M
|
|
|
++ }, {
|
|
|
++ .name = "rootfs",
|
|
|
++ .offset = MTDPART_OFS_NXTBLK,
|
|
|
++ .size = SZ_32M,
|
|
|
++ }, {
|
|
|
++ .name = "data",
|
|
|
++ .offset = MTDPART_OFS_NXTBLK,
|
|
|
++ .size = MTDPART_SIZ_FULL
|
|
|
++ },
|
|
|
++};
|
|
|
++
|
|
|
++static struct mv643xx_eth_platform_data iconnect_ge00_data = {
|
|
|
++ .phy_addr = MV643XX_ETH_PHY_ADDR(11),
|
|
|
++};
|
|
|
++
|
|
|
++static struct gpio_led iconnect_led_pins[] = {
|
|
|
++ {
|
|
|
++ .name = "iconnect:blue:power",
|
|
|
++ .default_trigger = "default-on",
|
|
|
++ .gpio = 42,
|
|
|
++ },
|
|
|
++ {
|
|
|
++ .name = "iconnect:red:power",
|
|
|
++ .gpio = 43,
|
|
|
++ },
|
|
|
++ {
|
|
|
++ .name = "iconnect:blue:usb1",
|
|
|
++ .gpio = 44,
|
|
|
++ },
|
|
|
++ {
|
|
|
++ .name = "iconnect:blue:usb2",
|
|
|
++ .gpio = 45,
|
|
|
++ },
|
|
|
++ {
|
|
|
++ .name = "iconnect:blue:usb3",
|
|
|
++ .gpio = 46,
|
|
|
++ },
|
|
|
++ {
|
|
|
++ .name = "iconnect:blue:usb4",
|
|
|
++ .gpio = 47,
|
|
|
++ },
|
|
|
++ {
|
|
|
++ .name = "iconnect:blue:otb",
|
|
|
++ .gpio = 48,
|
|
|
++ },
|
|
|
++};
|
|
|
++
|
|
|
++static struct gpio_led_platform_data iconnect_led_data = {
|
|
|
++ .leds = iconnect_led_pins,
|
|
|
++ .num_leds = ARRAY_SIZE(iconnect_led_pins),
|
|
|
++};
|
|
|
++
|
|
|
++static struct platform_device iconnect_leds = {
|
|
|
++ .name = "leds-gpio",
|
|
|
++ .id = -1,
|
|
|
++ .dev = {
|
|
|
++ .platform_data = &iconnect_led_data,
|
|
|
++ }
|
|
|
++};
|
|
|
++
|
|
|
++#define ICONNECT_GPIO_KEY_RESET 12
|
|
|
++#define ICONNECT_GPIO_KEY_OTB 35
|
|
|
++
|
|
|
++#define ICONNECT_SW_RESET 0x00
|
|
|
++#define ICONNECT_SW_OTB 0x01
|
|
|
++
|
|
|
++static struct gpio_keys_button iconnect_buttons[] = {
|
|
|
++ {
|
|
|
++ .type = EV_SW,
|
|
|
++ .code = ICONNECT_SW_RESET,
|
|
|
++ .gpio = ICONNECT_GPIO_KEY_RESET,
|
|
|
++ .desc = "Reset Button",
|
|
|
++ .active_low = 1,
|
|
|
++ .debounce_interval = 100,
|
|
|
++ },
|
|
|
++ {
|
|
|
++ .type = EV_SW,
|
|
|
++ .code = ICONNECT_SW_OTB,
|
|
|
++ .gpio = ICONNECT_GPIO_KEY_OTB,
|
|
|
++ .desc = "OTB Button",
|
|
|
++ .active_low = 1,
|
|
|
++ .debounce_interval = 100,
|
|
|
++ },
|
|
|
++};
|
|
|
++
|
|
|
++static struct gpio_keys_platform_data iconnect_button_data = {
|
|
|
++ .buttons = iconnect_buttons,
|
|
|
++ .nbuttons = ARRAY_SIZE(iconnect_buttons),
|
|
|
++};
|
|
|
++
|
|
|
++static struct platform_device iconnect_button_device = {
|
|
|
++ .name = "gpio-keys",
|
|
|
++ .id = -1,
|
|
|
++ .num_resources = 0,
|
|
|
++ .dev = {
|
|
|
++ .platform_data = &iconnect_button_data,
|
|
|
++ },
|
|
|
++};
|
|
|
++
|
|
|
++static unsigned int iconnect_mpp_config[] __initdata = {
|
|
|
++ MPP12_GPIO, /*Input for reset button*/
|
|
|
++ MPP35_GPIO, /*Input for OTB button*/
|
|
|
++ MPP42_GPIO,
|
|
|
++ MPP43_GPIO,
|
|
|
++ MPP44_GPIO,
|
|
|
++ MPP45_GPIO,
|
|
|
++ MPP46_GPIO,
|
|
|
++ MPP47_GPIO,
|
|
|
++ MPP48_GPIO,
|
|
|
++ 0
|
|
|
++};
|
|
|
++
|
|
|
++static void __init iconnect_init(void)
|
|
|
++{
|
|
|
++ u32 dev, rev;
|
|
|
++
|
|
|
++ /*
|
|
|
++ * Basic setup. Needs to be called early.
|
|
|
++ */
|
|
|
++ kirkwood_init();
|
|
|
++ kirkwood_mpp_conf(iconnect_mpp_config);
|
|
|
++
|
|
|
++ kirkwood_nand_init(ARRAY_AND_SIZE(iconnect_nand_parts), 25);
|
|
|
++ kirkwood_ehci_init();
|
|
|
++
|
|
|
++ kirkwood_ge00_init(&iconnect_ge00_data);
|
|
|
++ kirkwood_pcie_id(&dev, &rev);
|
|
|
++
|
|
|
++ kirkwood_uart0_init();
|
|
|
++ kirkwood_i2c_init();
|
|
|
++
|
|
|
++ platform_device_register(&iconnect_leds);
|
|
|
++ platform_device_register(&iconnect_button_device);
|
|
|
++}
|
|
|
++
|
|
|
++static int __init iconnect_pci_init(void)
|
|
|
++{
|
|
|
++ if (machine_is_iconnect())
|
|
|
++ kirkwood_pcie_init(KW_PCIE0);
|
|
|
++
|
|
|
++ return 0;
|
|
|
++}
|
|
|
++subsys_initcall(iconnect_pci_init);
|
|
|
++
|
|
|
++
|
|
|
++MACHINE_START(ICONNECT, "Iomega iConnect Wireless")
|
|
|
++ .atag_offset = 0x100,
|
|
|
++ .init_machine = iconnect_init,
|
|
|
++ .map_io = kirkwood_map_io,
|
|
|
++ .init_early = kirkwood_init_early,
|
|
|
++ .init_irq = kirkwood_init_irq,
|
|
|
++ .timer = &kirkwood_timer,
|
|
|
++ .restart = kirkwood_restart,
|
|
|
++MACHINE_END
|
Gabor Juhos