qualcommax: ipq807x: Remove unused gpio from QPIC pins

Remove gpio16 from the default NAND pinctrl configuration
as its unused and only needed for LCD.

Signed-off-by: Paweł Owoc <[email protected]>
Link: https://github.com/openwrt/openwrt/pull/14883
Signed-off-by: Robert Marko <[email protected]>

target/linux/qualcommax/patches-6.6/0063-v6.9-arm64-dts-qcom-ipq8074-Remove-unused-gpio-from-QPIC-.patch

@@ -0,0 +1,32 @@
+From 5f78d9213ae753e2242b0f6a5d4a5e98e55ddc76 Mon Sep 17 00:00:00 2001
+From: Paweł Owoc <[email protected]>
+Date: Wed, 13 Mar 2024 11:27:06 +0100
+Subject: [PATCH] arm64: dts: qcom: ipq8074: Remove unused gpio from QPIC pins
+
+gpio16 will only be used for LCD support, as its NAND/LCDC data[8]
+so its bit 9 of the parallel QPIC interface, and ONFI NAND is only 8
+or 16-bit with only 8-bit one being supported in our case so that pin
+is unused.
+
+It should be dropped from the default NAND pinctrl configuration
+as its unused and only needed for LCD.
+
+Signed-off-by: Paweł Owoc <[email protected]>
+Reviewed-by: Kathiravan Thirumoorthy <[email protected]>
+Link: https://lore.kernel.org/r/[email protected]
+Signed-off-by: Bjorn Andersson <[email protected]>
+---
+ arch/arm64/boot/dts/qcom/ipq8074.dtsi | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+@@ -372,7 +372,7 @@
+ 				       "gpio5", "gpio6", "gpio7",
+ 				       "gpio8", "gpio10", "gpio11",
+ 				       "gpio12", "gpio13", "gpio14",
+-				       "gpio15", "gpio16", "gpio17";
++				       "gpio15", "gpio17";
+ 				function = "qpic";
+ 				drive-strength = <8>;
+ 				bias-disable;