x86: remove the rdc subtarget, it was broken for ages and nobody cared

Signed-off-by: Felix Fietkau <[email protected]>

SVN-Revision: 48189

target/linux/x86/Makefile

@@ -10,7 +10,7 @@ ARCH:=i386
 BOARD:=x86
 BOARDNAME:=x86
 FEATURES:=squashfs ext4 vdi vmdk pcmcia targz
-SUBTARGETS=generic xen_domu ep80579 geode kvm_guest rdc 64
+SUBTARGETS=generic xen_domu ep80579 geode kvm_guest 64
 MAINTAINER:=Felix Fietkau <[email protected]>
 
 KERNEL_PATCHVER:=3.18

target/linux/x86/rdc/base-files/etc/config/network

@@ -1,26 +0,0 @@
-# Copyright (C) 2009 OpenWrt.org
-
-config interface loopback
-        option ifname   lo
-        option proto    static
-        option ipaddr   127.0.0.1
-        option netmask  255.0.0.0
-
-config interface lan
-        option ifname   eth1
-        option type     bridge
-        option proto    static
-        option ipaddr   192.168.1.1
-        option netmask  255.255.255.0
-        option ip6assign 60
-
-config interface wan
-	option ifname	eth0
-	option proto	dhcp
-
-config interface wan6
-        option ifname   eth0
-        option proto    dhcpv6
-
-config globals globals
-        option ula_prefix auto

target/linux/x86/rdc/base-files/etc/diag.sh

@@ -1,17 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2007-2013 OpenWrt.org
-
-. /lib/functions/leds.sh
-
-status_led="rdc321x:dmz"
-
-set_state() {
-	case "$1" in
-	preinit)
-		status_led_on
-		;;
-	done)
-		status_led_off
-		;;
-	esac
-}

target/linux/x86/rdc/base-files/lib/preinit/05_set_ether_mac_rdc

@@ -1,36 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2009-2012 OpenWrt.org
-
-. /lib/functions.sh
-
-r6040_module() {
-	insmod libphy
-	insmod swconfig
-	insmod ip17xx
-	sleep 1
-	insmod r6040
-}
-
-set_ether_mac() {
-	kernel=$(grep firmware /proc/mtd | awk -F: '{print $1}')
-	[ -n "$kernel" ] && hdr=$(dd if=/dev/$kernel count=4 bs=1 2> /dev/null)
-	[ "$hdr" = "CSYS" ] && config=$(find_mtd_part config)
-	if [ -n "$config" ]; then
-		mac0=$(hexdump -n 6 -e '6/1 ":%X"' -s 24583 $config | cut -c2-)
-		[ "$mac0" = "FF:FF:FF:FF:FF:FF" -o "$mac0" = "0:0:0:0:0:0" ] && unset mac0
-		mac1=$(hexdump -n 6 -e '6/1 ":%X"' -s 24589 $config | cut -c2-)
-		[ "$mac1" = "FF:FF:FF:FF:FF:FF" -o "$mac1" = "0:0:0:0:0:0" ] && unset mac1
-	fi
-	if [ -n "$mac0" ]; then
-		logger -t kernel -p user.info "r6040: Setting MAC for eth0 to $mac0"
-		ifconfig eth0 hw ether "$mac0"
-	fi
-	if [ -n "$mac1" ]; then
-		logger -t kernel -p user.info "r6040: Setting MAC for eth1 to $mac1"
-		ifconfig eth1 hw ether "$mac1"
-	fi
-}
-
-boot_hook_add preinit_main r6040_module
-boot_hook_add preinit_main set_ether_mac
-

target/linux/x86/rdc/base-files/lib/upgrade/platform.sh

@@ -1,10 +0,0 @@
-PART_NAME=firmware
-
-platform_check_image() {
-	[ "$(get_magic_word $(find_mtd_part firmware))" -eq "$(get_magic_word "$1")" ] && return 0
-
-	echo "Invalid image type. Please use an appropriate .bin file"
-	return 1
-}
-
-# use default for platform_do_upgrade()

target/linux/x86/rdc/config-default

@@ -1,65 +0,0 @@
-CONFIG_ARCH_RANDOM=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARPD is not set
-# CONFIG_BASE_FULL is not set
-CONFIG_BASE_SMALL=1
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BRIDGE=m
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CMDLINE="console=uart,io,0x3f8 rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-# CONFIG_COMPAT_VDSO is not set
-# CONFIG_CPU_SUP_AMD is not set
-# CONFIG_CPU_SUP_CENTAUR is not set
-# CONFIG_CPU_SUP_CYRIX_32 is not set
-# CONFIG_CPU_SUP_INTEL is not set
-# CONFIG_CPU_SUP_TRANSMETA_32 is not set
-# CONFIG_CPU_SUP_UMC_32 is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_EARLY_PRINTK is not set
-# CONFIG_FIRMWARE_MEMMAP is not set
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_RDC321X=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HPET_TIMER is not set
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_IP_MROUTE is not set
-CONFIG_IRQ_DOMAIN=y
-# CONFIG_JFFS2_SUMMARY is not set
-CONFIG_LEDS_GPIO=y
-# CONFIG_LEDS_TRIGGER_NETDEV is not set
-# CONFIG_LEDS_TRIGGER_TIMER is not set
-CONFIG_LLC=m
-CONFIG_MFD_CORE=y
-CONFIG_MFD_RDC321X=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MTRR is not set
-CONFIG_NLS=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-# CONFIG_PCI_QUIRKS is not set
-CONFIG_PHYSICAL_START=0x100000
-CONFIG_PROCESSOR_SELECT=y
-CONFIG_RDC321X_WDT=m
-# CONFIG_SCx200 is not set
-# CONFIG_SHMEM is not set
-CONFIG_STP=m
-CONFIG_VLAN_8021Q=m
-# CONFIG_VM86 is not set
-CONFIG_X86_EXTENDED_PLATFORM=y
-# CONFIG_X86_GENERIC is not set
-CONFIG_X86_INTERNODE_CACHE_SHIFT=4
-CONFIG_X86_L1_CACHE_SHIFT=4
-# CONFIG_X86_MCE is not set
-# CONFIG_X86_PLATFORM_DEVICES is not set
-# CONFIG_X86_PPRO_FENCE is not set
-CONFIG_X86_RDC321X=y
-CONFIG_X86_REBOOTFIXUPS=y
-# CONFIG_X86_UP_APIC is not set
-# CONFIG_X86_VERBOSE_BOOTUP is not set
-# CONFIG_X86_WANT_INTEL_MID is not set

target/linux/x86/rdc/profiles/ar525w.mk

@@ -1,12 +0,0 @@
-#
-# Copyright (C) 2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/ar525w
-  NAME:=Airlink AR525W
-  PACKAGES:=kmod-rt61-pci kmod-switch-ip17xx swconfig
-endef
-$(eval $(call Profile,ar525w))

target/linux/x86/rdc/profiles/bifferboard.mk

@@ -1,13 +0,0 @@
-#
-# Copyright (C) 2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/bifferboard
-	NAME:=Bifferboard
-	PACKAGES:=kmod-usb-core kmod-usb-ohci kmod-usb2 \
-		kmod-usb-storage kmod-scsi-core kmod-fs-ext4
-endef
-$(eval $(call Profile,bifferboard))

target/linux/x86/rdc/profiles/r8610.mk

@@ -1,14 +0,0 @@
-#
-# Copyright (C) 2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/r8610
-	NAME:=RDC R8610 Evaluation Board
-	PACKAGES:=kmod-usb-core kmod-usb-ohci kmod-usb2 \
-			kmod-hwmon-core kmod-hwmon-w83627hf kmod-ide-core kmod-ide-it821x \
-			kmod-rtc-core kmod-rtc-m48t86 kmod-fs-ext4
-endef
-$(eval $(call Profile,r8610))

target/linux/x86/rdc/profiles/sitecom.mk

@@ -1,12 +0,0 @@
-#
-# Copyright (C) 2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/sitecom
-	NAME:=Devices from Sitecom (WL-153, DC-230)
-	PACKAGES:=kmod-rt61-pci kmod-usb-core kmod-usb-ohci kmod-usb2
-endef
-$(eval $(call Profile,sitecom))

target/linux/x86/rdc/target.mk

@@ -1,13 +0,0 @@
-BOARDNAME:=RDC R-321x
-FEATURES:=squashfs pci usb gpio pcmcia
-MAINTAINER:=Florian Fainelli <[email protected]>
-FEATURES += broken
-
-DEFAULT_PACKAGES += kmod-llc kmod-stp kmod-bridge kmod-8021q \
-		    wpad-mini kmod-libphy kmod-r6040 kmod-input-core \
-		    kmod-input-polldev kmod-button-hotplug kmod-rdc321x-wdt
-
-define Target/Description
-        Build firmware images for RDC321x based routers
-        (e.g. Airlink101 AR525W, Linksys WRT54GR, Sitecom WL-153)
-endef