add preliminary 2.6.32 support

SVN-Revision: 19826

target/linux/rdc/config-2.6.32

@@ -0,0 +1,288 @@
+# CONFIG_4KSTACKS is not set
+# CONFIG_60XX_WDT is not set
+# CONFIG_64BIT is not set
+# CONFIG_ACQUIRE_WDT is not set
+# CONFIG_ADVANTECH_WDT is not set
+# CONFIG_ALIM1535_WDT is not set
+CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
+CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_ARCH_HAS_CPU_RELAX=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_WANT_FRAME_POINTERS=y
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_ARPD is not set
+# CONFIG_AUDIT_ARCH is not set
+# CONFIG_BASE_FULL is not set
+CONFIG_BASE_SMALL=1
+CONFIG_BITREVERSE=y
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BOUNCE=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_CC_STACKPROTECTOR is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
+CONFIG_CLOCKSOURCE_WATCHDOG=y
+CONFIG_CMDLINE="console=ttyS0,38400 rootfstype=squashfs,jffs2"
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CMDLINE_OVERRIDE is not set
+# CONFIG_COMPAT_VDSO is not set
+# CONFIG_CPU5_WDT is not set
+# CONFIG_CPU_SUP_AMD is not set
+# CONFIG_CPU_SUP_CENTAUR is not set
+# CONFIG_CPU_SUP_CYRIX_32 is not set
+# CONFIG_CPU_SUP_INTEL is not set
+# CONFIG_CPU_SUP_TRANSMETA_32 is not set
+# CONFIG_CPU_SUP_UMC_32 is not set
+# CONFIG_CS5535_GPIO is not set
+# CONFIG_DCDBAS is not set
+# CONFIG_DEBUG_FS is not set
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DEFAULT_IO_DELAY_TYPE=0
+# CONFIG_DELL_RBU is not set
+CONFIG_DEVPORT=y
+# CONFIG_DMI is not set
+CONFIG_DOUBLEFAULT=y
+# CONFIG_EARLY_PRINTK is not set
+# CONFIG_EDD is not set
+# CONFIG_EUROTECH_WDT is not set
+# CONFIG_FIRMWARE_MEMMAP is not set
+CONFIG_FIX_EARLYCON_MEM=y
+# CONFIG_FRAME_POINTER is not set
+# CONFIG_FSNOTIFY is not set
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+# CONFIG_GENERIC_CPU is not set
+CONFIG_GENERIC_FIND_FIRST_BIT=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_GENERIC_TIME_VSYSCALL is not set
+# CONFIG_GEN_RTC is not set
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HAMRADIO is not set
+# CONFIG_HANGCHECK_TIMER is not set
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAVE_AOUT=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_KMEMCHECK=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_ATOMIC_IOMAP=y
+# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_KVM=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_HAVE_MMIOTRACE_SUPPORT=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
+# CONFIG_HIGHMEM4G is not set
+# CONFIG_HIGHMEM64G is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+# CONFIG_HPET_TIMER is not set
+# CONFIG_HP_WATCHDOG is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_HZ=250
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_I6300ESB_WDT is not set
+# CONFIG_I8K is not set
+# CONFIG_IB700_WDT is not set
+# CONFIG_IBMASR is not set
+# CONFIG_IOMMU_API is not set
+# CONFIG_IOMMU_HELPER is not set
+# CONFIG_IOMMU_STRESS is not set
+CONFIG_IO_DELAY_0X80=y
+# CONFIG_IO_DELAY_0XED is not set
+# CONFIG_IO_DELAY_NONE is not set
+CONFIG_IO_DELAY_TYPE_0X80=0
+CONFIG_IO_DELAY_TYPE_0XED=1
+CONFIG_IO_DELAY_TYPE_NONE=3
+CONFIG_IO_DELAY_TYPE_UDELAY=2
+# CONFIG_IO_DELAY_UDELAY is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ISA is not set
+CONFIG_ISA_DMA_API=y
+# CONFIG_ISCSI_IBFT_FIND is not set
+# CONFIG_IT8712F_WDT is not set
+# CONFIG_IT87_WDT is not set
+# CONFIG_ITCO_WDT is not set
+# CONFIG_JFFS2_SUMMARY is not set
+CONFIG_KTIME_SCALAR=y
+# CONFIG_LEDS_ALIX2 is not set
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_NETDEV is not set
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+# CONFIG_M386 is not set
+CONFIG_M486=y
+# CONFIG_M586 is not set
+# CONFIG_M586MMX is not set
+# CONFIG_M586TSC is not set
+# CONFIG_M686 is not set
+# CONFIG_MACHZ_WDT is not set
+CONFIG_MATH_EMULATION=y
+# CONFIG_MATOM is not set
+# CONFIG_MCA is not set
+# CONFIG_MCORE2 is not set
+# CONFIG_MCRUSOE is not set
+# CONFIG_MCYRIXIII is not set
+# CONFIG_MEFFICEON is not set
+# CONFIG_MEMTEST is not set
+# CONFIG_MGEODEGX1 is not set
+# CONFIG_MGEODE_LX is not set
+# CONFIG_MICROCODE is not set
+# CONFIG_MK6 is not set
+# CONFIG_MK7 is not set
+# CONFIG_MK8 is not set
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MPENTIUM4 is not set
+# CONFIG_MPENTIUMII is not set
+# CONFIG_MPENTIUMIII is not set
+# CONFIG_MPENTIUMM is not set
+# CONFIG_MPSC is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_NETSC520 is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_R8610 is not set
+# CONFIG_MTD_RDC3210 is not set
+# CONFIG_MTD_TS5500 is not set
+# CONFIG_MTRR is not set
+# CONFIG_MVIAC3_2 is not set
+# CONFIG_MVIAC7 is not set
+# CONFIG_MWINCHIP3D is not set
+# CONFIG_MWINCHIPC6 is not set
+CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
+CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
+# CONFIG_NETDEV_1000 is not set
+CONFIG_NOHIGHMEM=y
+CONFIG_NR_CPUS=1
+# CONFIG_NSC_GPIO is not set
+# CONFIG_OLPC is not set
+# CONFIG_OPTIMIZE_INLINING is not set
+CONFIG_OUTPUT_FORMAT="elf32-i386"
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PARAVIRT_GUEST is not set
+# CONFIG_PC8736x_GPIO is not set
+# CONFIG_PC87413_WDT is not set
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_PCI_BIOS=y
+CONFIG_PCI_DIRECT=y
+CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_GOANY=y
+# CONFIG_PCI_GOBIOS is not set
+# CONFIG_PCI_GODIRECT is not set
+# CONFIG_PCI_GOMMCONFIG is not set
+# CONFIG_PCI_GOOLPC is not set
+# CONFIG_PCI_QUIRKS is not set
+CONFIG_PHYSICAL_ALIGN=0x100000
+CONFIG_PHYSICAL_START=0x100000
+CONFIG_PROCESSOR_SELECT=y
+# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
+CONFIG_RDC321X_WDT=m
+# CONFIG_RELOCATABLE is not set
+# CONFIG_RTC is not set
+# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+# CONFIG_SBC7240_WDT is not set
+# CONFIG_SBC8360_WDT is not set
+# CONFIG_SBC_EPX_C3_WATCHDOG is not set
+# CONFIG_SC1200_WDT is not set
+# CONFIG_SC520_WDT is not set
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCx200 is not set
+# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SHMEM is not set
+# CONFIG_SMSC37B787_WDT is not set
+# CONFIG_SMSC_SCH311X_WDT is not set
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_STRICT_DEVMEM is not set
+# CONFIG_TELCLOCK is not set
+# CONFIG_TOSHIBA is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+CONFIG_UID16=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USER_STACKTRACE_SUPPORT=y
+# CONFIG_VM86 is not set
+# CONFIG_W83697UG_WDT is not set
+# CONFIG_WAFER_WDT is not set
+CONFIG_X86=y
+CONFIG_X86_32=y
+CONFIG_X86_32_LAZY_GS=y
+# CONFIG_X86_64 is not set
+CONFIG_X86_ALIGNMENT_16=y
+CONFIG_X86_BSWAP=y
+# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
+CONFIG_X86_CMPXCHG=y
+CONFIG_X86_CPU=y
+# CONFIG_X86_CPUID is not set
+# CONFIG_X86_ELAN is not set
+CONFIG_X86_EXTENDED_PLATFORM=y
+CONFIG_X86_F00F_BUG=y
+# CONFIG_X86_GENERIC is not set
+CONFIG_X86_INTERNODE_CACHE_BYTES=64
+CONFIG_X86_INVLPG=y
+CONFIG_X86_L1_CACHE_BYTES=64
+CONFIG_X86_L1_CACHE_SHIFT=4
+# CONFIG_X86_MCE is not set
+CONFIG_X86_MINIMUM_CPU_FAMILY=4
+# CONFIG_X86_MRST is not set
+# CONFIG_X86_MSR is not set
+# CONFIG_X86_PAE is not set
+# CONFIG_X86_PLATFORM_DEVICES is not set
+CONFIG_X86_POPAD_OK=y
+# CONFIG_X86_PPRO_FENCE is not set
+CONFIG_X86_RDC321X=y
+CONFIG_X86_REBOOTFIXUPS=y
+# CONFIG_X86_RESERVE_LOW_64K is not set
+# CONFIG_X86_UP_APIC is not set
+# CONFIG_X86_VERBOSE_BOOTUP is not set
+CONFIG_X86_WP_WORKS_OK=y
+CONFIG_X86_XADD=y
+# CONFIG_ZONE_DMA32 is not set

target/linux/rdc/files-2.6.32/arch/x86/include/asm/rdc321x_gpio.h

@@ -0,0 +1,16 @@
+#ifndef _ASM_X86_MACH_RDC321X_GPIO_H
+#define _ASM_X86_MACH_RDC321X_GPIO_H
+
+#include <linux/kernel.h>
+
+#define gpio_to_irq(gpio)       NULL
+
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+
+#define gpio_cansleep __gpio_cansleep
+
+/* For cansleep */
+#include <asm-generic/gpio.h>
+
+#endif /* _ASM_X86_MACH_RDC321X_GPIO_H */

target/linux/rdc/files-2.6.32/arch/x86/mach-rdc321x/Makefile

@@ -0,0 +1,5 @@
+#
+# Makefile for the RDC321x specific parts of the kernel
+#
+obj-$(CONFIG_X86_RDC321X)        := gpio.o platform.o
+

target/linux/rdc/files-2.6.32/arch/x86/mach-rdc321x/gpio.c

@@ -0,0 +1,158 @@
+/*
+ *  GPIO support for RDC SoC R3210/R8610
+ *
+ *  Copyright (C) 2007, Florian Fainelli <[email protected]>
+ *  Copyright (C) 2008, Volker Weiss <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+
+#include <asm/rdc321x_gpio.h>
+#include <asm/rdc321x_defs.h>
+
+
+/* spin lock to protect our private copy of GPIO data register plus
+   the access to PCI conf registers. */
+static DEFINE_SPINLOCK(gpio_lock);
+
+/* copy of GPIO data registers */
+static u32 gpio_data_reg1;
+static u32 gpio_data_reg2;
+
+static inline void rdc321x_conf_write(unsigned addr, u32 value)
+{
+	outl((1 << 31) | (7 << 11) | addr, RDC3210_CFGREG_ADDR);
+	outl(value, RDC3210_CFGREG_DATA);
+}
+
+static inline void rdc321x_conf_or(unsigned addr, u32 value)
+{
+	outl((1 << 31) | (7 << 11) | addr, RDC3210_CFGREG_ADDR);
+	value |= inl(RDC3210_CFGREG_DATA);
+	outl(value, RDC3210_CFGREG_DATA);
+}
+
+static inline u32 rdc321x_conf_read(unsigned addr)
+{
+	outl((1 << 31) | (7 << 11) | addr, RDC3210_CFGREG_ADDR);
+
+	return inl(RDC3210_CFGREG_DATA);
+}
+
+/* configure pin as GPIO */
+static void rdc321x_configure_gpio(unsigned gpio)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+	rdc321x_conf_or(gpio < 32
+		? RDC321X_GPIO_CTRL_REG1 : RDC321X_GPIO_CTRL_REG2,
+		1 << (gpio & 0x1f));
+	spin_unlock_irqrestore(&gpio_lock, flags);
+}
+
+/* read GPIO pin */
+static int rdc_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
+{
+	u32 reg;
+	unsigned long flags;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+	reg = rdc321x_conf_read(gpio < 32
+		? RDC321X_GPIO_DATA_REG1 : RDC321X_GPIO_DATA_REG2);
+	spin_unlock_irqrestore(&gpio_lock, flags);
+
+	return (1 << (gpio & 0x1f)) & reg ? 1 : 0;
+}
+
+/* set GPIO pin to value */
+static void rdc_gpio_set_value(struct gpio_chip *chip,
+				unsigned gpio, int value)
+{
+	unsigned long flags;
+	u32 reg;
+
+	reg = 1 << (gpio & 0x1f);
+	if (gpio < 32) {
+		spin_lock_irqsave(&gpio_lock, flags);
+		if (value)
+			gpio_data_reg1 |= reg;
+		else
+			gpio_data_reg1 &= ~reg;
+		rdc321x_conf_write(RDC321X_GPIO_DATA_REG1, gpio_data_reg1);
+		spin_unlock_irqrestore(&gpio_lock, flags);
+	} else {
+		spin_lock_irqsave(&gpio_lock, flags);
+		if (value)
+			gpio_data_reg2 |= reg;
+		else
+			gpio_data_reg2 &= ~reg;
+		rdc321x_conf_write(RDC321X_GPIO_DATA_REG2, gpio_data_reg2);
+		spin_unlock_irqrestore(&gpio_lock, flags);
+	}
+}
+
+/* configure GPIO pin as input */
+static int rdc_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+{
+	rdc321x_configure_gpio(gpio);
+
+	return 0;
+}
+
+/* configure GPIO pin as output and set value */
+static int rdc_gpio_direction_output(struct gpio_chip *chip,
+				unsigned gpio, int value)
+{
+	rdc321x_configure_gpio(gpio);
+	gpio_set_value(gpio, value);
+
+	return 0;
+}
+
+static struct gpio_chip rdc321x_gpio_chip = {
+	.label			= "rdc321x-gpio",
+	.direction_input	= rdc_gpio_direction_input,
+	.direction_output	= rdc_gpio_direction_output,
+	.get			= rdc_gpio_get_value,
+	.set			= rdc_gpio_set_value,
+	.base			= 0,
+	.ngpio			= RDC321X_MAX_GPIO,
+};
+
+/* initially setup the 2 copies of the gpio data registers.
+   This function is called before the platform setup code. */
+static int __init rdc321x_gpio_setup(void)
+{
+	/* this might not be, what others (BIOS, bootloader, etc.)
+	   wrote to these registers before, but it's a good guess. Still
+	   better than just using 0xffffffff. */
+
+	gpio_data_reg1 = rdc321x_conf_read(RDC321X_GPIO_DATA_REG1);
+	gpio_data_reg2 = rdc321x_conf_read(RDC321X_GPIO_DATA_REG2);
+
+	printk(KERN_INFO "rdc321x: registering %d GPIOs\n", rdc321x_gpio_chip.ngpio);
+	return gpiochip_add(&rdc321x_gpio_chip);
+}
+
+arch_initcall(rdc321x_gpio_setup);

target/linux/rdc/files-2.6.32/arch/x86/mach-rdc321x/platform.c

@@ -0,0 +1,290 @@
+/*
+ *  Generic RDC321x platform devices
+ *
+ *  Copyright (C) 2007-2009 OpenWrt.org
+ *  Copyright (C) 2007 Florian Fainelli <[email protected]>
+ *  Copyright (C) 2008-2009 Daniel Gimpelevich <[email protected]>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/version.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/physmap.h>
+#include <linux/root_dev.h>
+
+#include <asm/rdc321x_gpio.h>
+
+/* Flash */
+#ifdef CONFIG_MTD_R8610
+#define CONFIG_MTD_RDC3210 1
+#elif defined CONFIG_MTD_RDC3210
+static struct resource rdc_flash_resource[] = {
+	[0] = {
+		.start = (u32)-CONFIG_MTD_RDC3210_SIZE,
+		.end = (u32)-1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device rdc_flash_device = {
+	.name = "rdc321x-flash",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(rdc_flash_resource),
+	.resource = rdc_flash_resource,
+};
+#else
+static struct mtd_partition rdc_flash_parts[15];
+
+static struct resource rdc_flash_resource = {
+	.end = (u32)-1,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct physmap_flash_data rdc_flash_data = {
+	.parts = rdc_flash_parts,
+};
+
+static struct platform_device rdc_flash_device = {
+	.name = "physmap-flash",
+	.id = -1,
+	.resource = &rdc_flash_resource,
+	.num_resources = 1,
+	.dev.platform_data = &rdc_flash_data,
+};
+#endif
+
+/* LEDS */
+static struct gpio_led default_leds[] = {
+	{ .name = "rdc321x:dmz", .gpio = 1, .active_low = 1},
+};
+
+static struct gpio_led_platform_data rdc321x_led_data = {
+	.num_leds = ARRAY_SIZE(default_leds),
+	.leds = default_leds,
+};
+
+static struct platform_device rdc321x_leds = {
+	.name = "leds-gpio",
+	.id = -1,
+	.dev = {
+		.platform_data = &rdc321x_led_data,
+	}
+};
+
+/* Watchdog */
+static struct platform_device rdc321x_wdt = {
+	.name = "rdc321x-wdt",
+	.id = -1,
+	.num_resources = 0,
+};
+
+/* Button */
+static struct gpio_keys_button rdc321x_gpio_btn[] = {
+	{
+		.gpio = 0,
+		.code = BTN_0,
+		.desc = "Reset",
+		.active_low = 1,
+	}
+};
+
+static struct gpio_keys_platform_data rdc321x_gpio_btn_data = {
+	.buttons = rdc321x_gpio_btn,
+	.nbuttons = ARRAY_SIZE(rdc321x_gpio_btn),
+};
+
+static struct platform_device rdc321x_button = {
+	.name = "gpio-keys",
+	.id = -1,
+	.dev = {
+		.platform_data = &rdc321x_gpio_btn_data,
+	}
+};
+
+static struct platform_device *rdc321x_devs[] = {
+	&rdc_flash_device,
+	&rdc321x_leds,
+	&rdc321x_wdt,
+	&rdc321x_button,
+};
+
+static int probe_flash_start(struct map_info *the_map)
+{
+	struct mtd_info *res;
+
+	the_map->virt = ioremap(the_map->phys, the_map->size);
+	if (the_map->virt == NULL)
+		return 1;
+	for (the_map->bankwidth = 32; the_map->bankwidth; the_map->bankwidth
+			>>= 1) {
+		res = do_map_probe("cfi_probe", the_map);
+		if (res == NULL)
+			res = do_map_probe("jedec_probe", the_map);
+		if (res != NULL)
+			break;
+	}
+	iounmap(the_map->virt);
+	if (res != NULL)
+		the_map->phys = (u32)-(s32)(the_map->size = res->size);
+	return res == NULL;
+}
+
+static int __init rdc_board_setup(void)
+{
+#ifndef CONFIG_MTD_RDC3210
+	struct map_info rdc_map_info;
+	u32 the_header[8];
+
+	ROOT_DEV = 0;
+	rdc_map_info.name = rdc_flash_device.name;
+	rdc_map_info.size = 0x800000;	//8MB
+	rdc_map_info.phys = (u32) -rdc_map_info.size;
+	rdc_map_info.bankwidth = 2;
+	rdc_map_info.set_vpp = NULL;
+	simple_map_init(&rdc_map_info);
+	while (probe_flash_start(&rdc_map_info)) {
+		if (rdc_map_info.size /= 2 < 0x100000)	//1MB
+			panic("Could not find start of flash!");
+		rdc_map_info.phys = (u32) -rdc_map_info.size;
+	}
+	rdc_flash_resource.start = rdc_map_info.phys;
+	rdc_flash_data.width = rdc_map_info.bankwidth;
+	rdc_map_info.virt = ioremap_nocache(rdc_map_info.phys, 0x10);
+	if (rdc_map_info.virt == NULL)
+		panic("Could not ioremap to read device magic!");
+	the_header[0] = ((u32 *)rdc_map_info.virt)[0];
+	the_header[1] = ((u32 *)rdc_map_info.virt)[1];
+	the_header[2] = ((u32 *)rdc_map_info.virt)[2];
+	the_header[3] = ((u32 *)rdc_map_info.virt)[3];
+	iounmap(rdc_map_info.virt);
+	rdc_map_info.virt = ioremap_nocache(rdc_map_info.phys + 0x8000, 0x10);
+	if (rdc_map_info.virt == NULL)
+		panic("Could not ioremap to read device magic!");
+	the_header[4] = ((u32 *)rdc_map_info.virt)[0];
+	the_header[5] = ((u32 *)rdc_map_info.virt)[1];
+	the_header[6] = ((u32 *)rdc_map_info.virt)[2];
+	the_header[7] = ((u32 *)rdc_map_info.virt)[3];
+	iounmap(rdc_map_info.virt);
+	if (!memcmp(the_header, "GMTK", 4)) {	/* Gemtek */
+		/* TODO */
+	} else if (!memcmp(the_header + 4, "CSYS", 4)) {	/* Sitecom */
+		rdc_flash_parts[0].name = "system";
+		rdc_flash_parts[0].offset = 0;
+		rdc_flash_parts[0].size = rdc_map_info.size - 0x10000;
+		rdc_flash_parts[1].name = "config";
+		rdc_flash_parts[1].offset = 0;
+		rdc_flash_parts[1].size = 0x8000;
+		rdc_flash_parts[2].name = "magic";
+		rdc_flash_parts[2].offset = 0x8000;
+		rdc_flash_parts[2].size = 0x14;
+		rdc_flash_parts[3].name = "kernel";
+		rdc_flash_parts[3].offset = 0x8014;
+		rdc_flash_parts[3].size = the_header[5];
+		rdc_flash_parts[4].name = "rootfs";
+		rdc_flash_parts[4].offset = 0x8014 + the_header[5];
+		rdc_flash_parts[4].size = rdc_flash_parts[0].size - rdc_flash_parts[4].offset;
+		rdc_flash_parts[5].name = "bootloader";
+		rdc_flash_parts[5].offset = rdc_flash_parts[0].size;
+		rdc_flash_parts[5].size = 0x10000;
+		rdc_flash_data.nr_parts = 6;
+	} else if (!memcmp(((u8 *)the_header) + 14, "Li", 2)) {	/* AMIT */
+		rdc_flash_parts[0].name = "kernel_parthdr";
+		rdc_flash_parts[0].offset = 0;
+		rdc_flash_parts[0].size = 0x10;
+		rdc_flash_parts[1].name = "kernel";
+		rdc_flash_parts[1].offset = 0x10;
+		rdc_flash_parts[1].size = 0xffff0;
+		rdc_flash_parts[2].name = "rootfs_parthdr";
+		rdc_flash_parts[2].offset = 0x100000;
+		rdc_flash_parts[2].size = 0x10;
+		rdc_flash_parts[3].name = "rootfs";
+		rdc_flash_parts[3].offset = 0x100010;
+		rdc_flash_parts[3].size = rdc_map_info.size - 0x160010;
+		rdc_flash_parts[4].name = "config_parthdr";
+		rdc_flash_parts[4].offset = rdc_map_info.size - 0x60000;
+		rdc_flash_parts[4].size = 0x10;
+		rdc_flash_parts[5].name = "config";
+		rdc_flash_parts[5].offset = rdc_map_info.size - 0x5fff0;
+		rdc_flash_parts[5].size = 0xfff0;
+		rdc_flash_parts[6].name = "recoveryfs_parthdr";
+		rdc_flash_parts[6].offset = rdc_map_info.size - 0x50000;
+		rdc_flash_parts[6].size = 0x10;
+		rdc_flash_parts[7].name = "recoveryfs";
+		rdc_flash_parts[7].offset = rdc_map_info.size - 0x4fff0;
+		rdc_flash_parts[7].size = 0x3fff0;
+		rdc_flash_parts[8].name = "recovery_parthdr";
+		rdc_flash_parts[8].offset = rdc_map_info.size - 0x10000;
+		rdc_flash_parts[8].size = 0x10;
+		rdc_flash_parts[9].name = "recovery";
+		rdc_flash_parts[9].offset = rdc_map_info.size - 0xfff0;
+		rdc_flash_parts[9].size = 0x7ff0;
+		rdc_flash_parts[10].name = "productinfo_parthdr";
+		rdc_flash_parts[10].offset = rdc_map_info.size - 0x8000;
+		rdc_flash_parts[10].size = 0x10;
+		rdc_flash_parts[11].name = "productinfo";
+		rdc_flash_parts[11].offset = rdc_map_info.size - 0x7ff0;
+		rdc_flash_parts[11].size = 0x1ff0;
+		rdc_flash_parts[12].name = "bootloader_parthdr";
+		rdc_flash_parts[12].offset = rdc_map_info.size - 0x6000;
+		rdc_flash_parts[12].size = 0x10;
+		rdc_flash_parts[13].name = "bootloader";
+		rdc_flash_parts[13].offset = rdc_map_info.size - 0x5ff0;
+		rdc_flash_parts[13].size = 0x5ff0;
+		rdc_flash_parts[14].name = "everything";
+		rdc_flash_parts[14].offset = 0;
+		rdc_flash_parts[14].size = rdc_map_info.size;
+		rdc_flash_data.nr_parts = 15;
+	} else {	/* ZyXEL */
+		rdc_flash_parts[0].name = "kernel";
+		rdc_flash_parts[0].offset = 0;
+		rdc_flash_parts[0].size = 0x100000;
+		rdc_flash_parts[1].name = "rootfs";
+		rdc_flash_parts[1].offset = 0x100000;
+		rdc_flash_parts[1].size = rdc_map_info.size - 0x140000;
+		rdc_flash_parts[2].name = "linux";
+		rdc_flash_parts[2].offset = 0;
+		rdc_flash_parts[2].size = rdc_map_info.size - 0x40000;
+		rdc_flash_parts[3].name = "config";
+		rdc_flash_parts[3].offset = rdc_map_info.size - 0x40000;
+		rdc_flash_parts[3].size = 0x10000;
+		rdc_flash_parts[4].name = "productinfo";
+		rdc_flash_parts[4].offset = rdc_map_info.size - 0x30000;
+		rdc_flash_parts[4].size = 0x10000;
+		rdc_flash_parts[5].name = "bootloader";
+		rdc_flash_parts[5].offset = rdc_map_info.size - 0x20000;
+		rdc_flash_parts[5].size = 0x20000;
+		rdc_flash_data.nr_parts = 6;
+	}
+#endif
+	return platform_add_devices(rdc321x_devs, ARRAY_SIZE(rdc321x_devs));
+}
+
+#ifdef CONFIG_MTD_RDC3210
+arch_initcall(rdc_board_setup);
+#else
+late_initcall(rdc_board_setup);
+#endif

target/linux/rdc/patches-2.6.32/001-rdc3210_flash_map.patch

@@ -0,0 +1,63 @@
+--- a/drivers/mtd/maps/Kconfig
++++ b/drivers/mtd/maps/Kconfig
+@@ -114,6 +114,50 @@ config MTD_SUN_UFLASH
+ 	  Sun Microsystems boardsets.  This driver will require CFI support
+ 	  in the kernel, so if you did not enable CFI previously, do that now.
+ 
++config MTD_RDC3210
++	tristate "CFI Flash device mapped on RDC3210"
++	depends on X86 && MTD_CFI && MTD_PARTITIONS
++	help
++	  RDC-3210 is the flash device we find on Ralink reference board.
++
++config MTD_RDC3210_STATIC_MAP
++	bool "Partitions on RDC3210 mapped statically" if MTD_RDC3210
++	select MTD_RDC3210_FACTORY_PRESENT
++	help
++	  The mapping driver will use the static partition map for the
++	  RDC-3210 flash device.
++
++config MTD_RDC3210_FACTORY_PRESENT
++	bool "Reserve a partition on RDC3210 for factory presets"
++	depends on MTD_RDC3210
++	default y
++	help
++	  The mapping driver will reserve a partition on the RDC-3210 flash
++	  device for resetting flash contents to factory defaults.
++
++config MTD_RDC3210_ALLOW_JFFS2
++	bool "JFFS2 filesystem usable in a partition on RDC3210"
++	depends on MTD_RDC3210 && !MTD_RDC3210_STATIC_MAP
++	help
++	  The mapping driver will align a partition on the RDC-3210 flash
++	  device to an erase-block boundary so that a JFFS2 filesystem may
++	  reside on it.
++
++config MTD_RDC3210_SIZE
++	hex "Amount of flash memory on RDC3210"
++	depends on MTD_RDC3210
++	default "0x400000"
++	help
++	  Total size in bytes of the RDC-3210 flash device
++
++config MTD_RDC3210_BUSWIDTH
++	int "Width of CFI Flash device mapped on RDC3210"
++	depends on MTD_RDC3210
++	default "2"
++	help
++	  Number of bytes addressed on the RDC-3210 flash device before
++	  addressing the same chip again
++
+ config MTD_SC520CDP
+ 	tristate "CFI Flash device mapped on AMD SC520 CDP"
+ 	depends on X86 && MTD_CFI && MTD_CONCAT
+--- a/drivers/mtd/maps/Makefile
++++ b/drivers/mtd/maps/Makefile
+@@ -26,6 +26,7 @@ obj-$(CONFIG_MTD_PHYSMAP)	+= physmap.o
+ obj-$(CONFIG_MTD_PHYSMAP_OF)	+= physmap_of.o
+ obj-$(CONFIG_MTD_PMC_MSP_EVM)   += pmcmsp-flash.o
+ obj-$(CONFIG_MTD_PCMCIA)	+= pcmciamtd.o
++obj-$(CONFIG_MTD_RDC3210)	+= rdc3210.o
+ obj-$(CONFIG_MTD_RPXLITE)	+= rpxlite.o
+ obj-$(CONFIG_MTD_TQM8XXL)	+= tqm8xxl.o
+ obj-$(CONFIG_MTD_SA1100)	+= sa1100-flash.o

target/linux/rdc/patches-2.6.32/002-platform_support.patch

@@ -0,0 +1,12 @@
+--- a/arch/x86/Makefile
++++ b/arch/x86/Makefile
+@@ -125,6 +125,9 @@ libs-y  += arch/x86/lib/
+ # See arch/x86/Kbuild for content of core part of the kernel
+ core-y += arch/x86/
+ 
++# RDC R-321X support
++core-$(CONFIG_X86_RDC321X)   += arch/x86/mach-rdc321x/
++
+ # drivers-y are linked after core-y
+ drivers-$(CONFIG_MATH_EMULATION) += arch/x86/math-emu/
+ drivers-$(CONFIG_PCI)            += arch/x86/pci/

target/linux/rdc/patches-2.6.32/004-yenta_mystery.patch

@@ -0,0 +1,20 @@
+--- a/drivers/pcmcia/yenta_socket.c
++++ b/drivers/pcmcia/yenta_socket.c
+@@ -1174,6 +1174,17 @@ static int __devinit yenta_probe (struct
+ 
+ 	/* We must finish initialization here */
+ 
++#ifdef CONFIG_X86_RDC321X
++/* #define YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK 0x0044f044 */
++#define YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK 0x0844b060
++/* #define YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK 0x0044d044 */
++
++	config_writel(socket, 32*4, YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK);
++	config_writel(socket, 35*4, 0x00000022);
++	config_writel(socket, 36*4, 0x60200000);
++	config_writel(socket, 40*4, 0x7e020000);
++#endif
++
+ 	if (!socket->cb_irq || request_irq(socket->cb_irq, yenta_interrupt, IRQF_SHARED, "yenta", socket)) {
+ 		/* No IRQ or request_irq failed. Poll */
+ 		socket->cb_irq = 0; /* But zero is a valid IRQ number. */

target/linux/rdc/patches-2.6.32/005-fix_amit_breakage.patch

@@ -0,0 +1,40 @@
+--- a/arch/x86/boot/boot.h
++++ b/arch/x86/boot/boot.h
+@@ -64,7 +64,7 @@ static inline void outl(u32 v, u16 port)
+ {
+ 	asm volatile("outl %0,%1" : : "a" (v), "dN" (port));
+ }
+-static inline u32 inl(u32 port)
++static inline u32 inl(u16 port)
+ {
+ 	u32 v;
+ 	asm volatile("inl %1,%0" : "=a" (v) : "dN" (port));
+--- a/arch/x86/boot/pm.c
++++ b/arch/x86/boot/pm.c
+@@ -14,6 +14,9 @@
+ 
+ #include "boot.h"
+ #include <asm/segment.h>
++#ifdef CONFIG_X86_RDC321X
++#include <asm/rdc321x_defs.h>
++#endif
+ 
+ /*
+  * Invoke the realmode switch hook if present; otherwise
+@@ -112,6 +115,16 @@ void go_to_protected_mode(void)
+ 		die();
+ 	}
+ 
++#ifdef CONFIG_X86_RDC321X
++	{
++		u32 bootctl;
++
++		outl(0x80003840, RDC3210_CFGREG_ADDR);
++		bootctl = inl(RDC3210_CFGREG_DATA) | 0x07ff0000;
++		outl(bootctl, RDC3210_CFGREG_DATA);
++	}
++#endif
++
+ 	/* Reset coprocessor (IGNNE#) */
+ 	reset_coprocessor();
+ 

target/linux/rdc/patches-2.6.32/008-r8610_flash_map.patch

@@ -0,0 +1,25 @@
+--- a/drivers/mtd/maps/Kconfig
++++ b/drivers/mtd/maps/Kconfig
+@@ -158,6 +158,12 @@ config MTD_RDC3210_BUSWIDTH
+ 	  Number of bytes addressed on the RDC-3210 flash device before
+ 	  addressing the same chip again
+ 
++config MTD_R8610
++	tristate "CFI flash device mapped on R8610"
++	depends on X86 && MTD_CFI && MTD_PARTITIONS
++	help
++	  Flash support for the RDC R8610 evaluation board.
++
+ config MTD_SC520CDP
+ 	tristate "CFI Flash device mapped on AMD SC520 CDP"
+ 	depends on X86 && MTD_CFI && MTD_CONCAT
+--- a/drivers/mtd/maps/Makefile
++++ b/drivers/mtd/maps/Makefile
+@@ -27,6 +27,7 @@ obj-$(CONFIG_MTD_PHYSMAP_OF)	+= physmap_
+ obj-$(CONFIG_MTD_PMC_MSP_EVM)   += pmcmsp-flash.o
+ obj-$(CONFIG_MTD_PCMCIA)	+= pcmciamtd.o
+ obj-$(CONFIG_MTD_RDC3210)	+= rdc3210.o
++obj-$(CONFIG_MTD_R8610)		+= r8610.o
+ obj-$(CONFIG_MTD_RPXLITE)	+= rpxlite.o
+ obj-$(CONFIG_MTD_TQM8XXL)	+= tqm8xxl.o
+ obj-$(CONFIG_MTD_SA1100)	+= sa1100-flash.o

target/linux/rdc/patches-2.6.32/009-rdc321x_select_embedded.patch

@@ -0,0 +1,11 @@
+--- a/arch/x86/Kconfig
++++ b/arch/x86/Kconfig
+@@ -400,6 +400,8 @@ config X86_RDC321X
+ 	depends on X86_EXTENDED_PLATFORM
+ 	select M486
+ 	select X86_REBOOTFIXUPS
++	select EMBEDDED
++	select ARCH_REQUIRE_GPIOLIB
+ 	---help---
+ 	  This option is needed for RDC R-321x system-on-chip, also known
+ 	  as R-8610-(G).

target/linux/rdc/patches-2.6.32/010-rdc_cpu_ident.patch

@@ -0,0 +1,176 @@
+--- /dev/null
++++ b/Documentation/x86/rdc.txt
+@@ -0,0 +1,69 @@
++
++Introduction
++============
++
++RDC (http://www.rdc.com.tw) have been manufacturing x86-compatible SoC
++(system-on-chips) for a number of years.  They are not the fastest of
++CPUs (clock speeds ranging from 133-150MHz) but 486SX compatibility
++coupled with very low power consumption[1] and low cost make them ideal
++for embedded applications.
++
++
++Where to find
++=============
++
++RDC chips show up in numerous embedded devices, but be careful since
++many of them will not run Linux 2.6 without significant expertise.
++
++There are several variants of what the linux kernel refers to generically
++as RDC321X:  R8610, R321x, S3282 and AMRISC20000.
++
++R321x: Found in various routers, see the OpenWrt project for details,
++   http://wiki.openwrt.org/oldwiki/rdcport
++
++R8610: Found on the RDC evaluation board
++   http://www.ivankuten.com/system-on-chip-soc/rdc-r8610/
++
++AMRISC20000: Found in the MGB-100 wireless hard disk
++   http://tintuc.no-ip.com/linux/tipps/mgb100/
++
++S3282: Found in various NAS devices, including the Bifferboard
++   http://www.bifferos.com
++
++
++Kernel Configuration
++====================
++
++Add support for this CPU with CONFIG_X86_RDC321X.  Ensure that maths
++emulation is included (CONFIG_MATH_EMULATION selected) and avoid MCE
++(CONFIG_X86_MCE not selected).
++
++
++CPU detection
++=============
++
++None of these chips support the cpuid instruction, so as with some
++other x86 compatible SoCs, we must check the north bridge and look
++for specific 'signature' PCI device config.
++
++The current detection code has been tested only on the Bifferboard
++(S3282 CPU), please send bug reports or success stories with
++other devices to [email protected].
++
++
++Credits
++=======
++
++Many thanks to RDC for providing the customer codes to allow
++detection of all known variants, without which this detection code
++would have been very hard to ascertain.
++
++
++References
++==========
++
++[1] S3282 in certain NAS solutions consumes less than 1W
++
++
[email protected] 2009
++
+--- a/arch/x86/Kconfig
++++ b/arch/x86/Kconfig
+@@ -398,6 +398,7 @@ config X86_RDC321X
+ 	bool "RDC R-321x SoC"
+ 	depends on X86_32
+ 	depends on X86_EXTENDED_PLATFORM
++	select PCI
+ 	select M486
+ 	select X86_REBOOTFIXUPS
+ 	select EMBEDDED
+--- a/arch/x86/include/asm/processor.h
++++ b/arch/x86/include/asm/processor.h
+@@ -122,7 +122,8 @@ struct cpuinfo_x86 {
+ #define X86_VENDOR_CENTAUR	5
+ #define X86_VENDOR_TRANSMETA	7
+ #define X86_VENDOR_NSC		8
+-#define X86_VENDOR_NUM		9
++#define X86_VENDOR_RDC		9
++#define X86_VENDOR_NUM		10
+ 
+ #define X86_VENDOR_UNKNOWN	0xff
+ 
+--- a/arch/x86/kernel/cpu/Makefile
++++ b/arch/x86/kernel/cpu/Makefile
+@@ -24,6 +24,7 @@ obj-$(CONFIG_CPU_SUP_CYRIX_32)		+= cyrix
+ obj-$(CONFIG_CPU_SUP_CENTAUR)		+= centaur.o
+ obj-$(CONFIG_CPU_SUP_TRANSMETA_32)	+= transmeta.o
+ obj-$(CONFIG_CPU_SUP_UMC_32)		+= umc.o
++obj-$(CONFIG_X86_RDC321X)		+= rdc.o
+ 
+ obj-$(CONFIG_PERF_EVENTS)		+= perf_event.o
+ 
+--- /dev/null
++++ b/arch/x86/kernel/cpu/rdc.c
+@@ -0,0 +1,69 @@
++/*
++ * See Documentation/x86/rdc.txt
++ *
++ * [email protected]
++ */
++
++#include <linux/pci.h>
++#include <asm/pci-direct.h>
++#include "cpu.h"
++
++
++static void __cpuinit rdc_identify(struct cpuinfo_x86 *c)
++{
++	u16 vendor, device;
++	u32 customer_id;
++
++	if (!early_pci_allowed())
++		return;
++
++	/* RDC CPU is SoC (system-on-chip), Northbridge is always present */
++	vendor = read_pci_config_16(0, 0, 0, PCI_VENDOR_ID);
++	device = read_pci_config_16(0, 0, 0, PCI_DEVICE_ID);
++
++	if (vendor != PCI_VENDOR_ID_RDC || device != PCI_DEVICE_ID_RDC_R6020)
++		return;  /* not RDC */
++	/*
++	 * NB: We could go on and check other devices, e.g. r6040 NIC, but
++	 * that's probably overkill
++	 */
++
++	customer_id = read_pci_config(0, 0, 0, 0x90);
++
++	switch (customer_id) {
++		/* id names are from RDC */
++	case 0x00321000:
++		strcpy(c->x86_model_id, "R3210/R3211");
++		break;
++	case 0x00321001:
++		strcpy(c->x86_model_id, "AMITRISC20000/20010");
++		break;
++	case 0x00321002:
++		strcpy(c->x86_model_id, "R3210X/Edimax");
++		break;
++	case 0x00321003:
++		strcpy(c->x86_model_id, "R3210/Kcodes");
++		break;
++	case 0x00321004:  /* tested */
++		strcpy(c->x86_model_id, "S3282/CodeTek");
++		break;
++	case 0x00321007:
++		strcpy(c->x86_model_id, "R8610");
++		break;
++	default:
++		pr_info("RDC CPU: Unrecognised Customer ID (0x%x) please report to [email protected]\n", customer_id);
++		return;
++	}
++
++	strcpy(c->x86_vendor_id, "RDC");
++	c->x86_vendor = X86_VENDOR_RDC;
++}
++
++static const struct cpu_dev __cpuinitconst rdc_cpu_dev = {
++	.c_vendor	= "RDC",
++	.c_ident	= { "RDC" },
++	.c_identify	= rdc_identify,
++	.c_x86_vendor	= X86_VENDOR_RDC,
++};
++
++cpu_dev_register(rdc_cpu_dev);