Enable LDSO_RUNPATH in uClibc configuration for all platforms

SVN-Revision: 7769

toolchain/uClibc/config/arm

@@ -67,7 +67,7 @@ LDSO_LDD_SUPPORT=y
 LDSO_CACHE_SUPPORT=y
 # LDSO_PRELOAD_FILE_SUPPORT is not set
 LDSO_BASE_FILENAME="ld.so"
-# LDSO_RUNPATH is not set
+LDSO_RUNPATH=y
 # DL_FINI_CRT_COMPAT is not set
 UCLIBC_CTOR_DTOR=y
 # HAS_NO_THREADS is not set

toolchain/uClibc/config/armeb

@@ -67,7 +67,7 @@ LDSO_LDD_SUPPORT=y
 LDSO_CACHE_SUPPORT=y
 # LDSO_PRELOAD_FILE_SUPPORT is not set
 LDSO_BASE_FILENAME="ld.so"
-# LDSO_RUNPATH is not set
+LDSO_RUNPATH=y
 # DL_FINI_CRT_COMPAT is not set
 UCLIBC_CTOR_DTOR=y
 # HAS_NO_THREADS is not set

toolchain/uClibc/config/avr32

@@ -58,7 +58,7 @@ LDSO_LDD_SUPPORT=y
 LDSO_CACHE_SUPPORT=y
 # LDSO_PRELOAD_FILE_SUPPORT is not set
 LDSO_BASE_FILENAME="ld.so"
-# LDSO_RUNPATH is not set
+LDSO_RUNPATH=y
 # DL_FINI_CRT_COMPAT is not set
 UCLIBC_CTOR_DTOR=y
 # HAS_NO_THREADS is not set

toolchain/uClibc/config/cris

@@ -56,7 +56,7 @@ LDSO_LDD_SUPPORT=y
 LDSO_CACHE_SUPPORT=y
 # LDSO_PRELOAD_FILE_SUPPORT is not set
 LDSO_BASE_FILENAME="ld.so"
-# LDSO_RUNPATH is not set
+LDSO_RUNPATH=y
 # DL_FINI_CRT_COMPAT is not set
 # UCLIBC_CTOR_DTOR is not set
 # HAS_NO_THREADS is not set

toolchain/uClibc/config/i386

@@ -84,7 +84,7 @@ LDSO_LDD_SUPPORT=y
 LDSO_CACHE_SUPPORT=y
 # LDSO_PRELOAD_FILE_SUPPORT is not set
 LDSO_BASE_FILENAME="ld.so"
-# LDSO_RUNPATH is not set
+LDSO_RUNPATH=y
 # DL_FINI_CRT_COMPAT is not set
 UCLIBC_CTOR_DTOR=y
 # HAS_NO_THREADS is not set

toolchain/uClibc/config/mips

@@ -69,7 +69,7 @@ LDSO_LDD_SUPPORT=y
 LDSO_CACHE_SUPPORT=y
 # LDSO_PRELOAD_FILE_SUPPORT is not set
 LDSO_BASE_FILENAME="ld.so"
-# LDSO_RUNPATH is not set
+LDSO_RUNPATH=y
 DL_FINI_CRT_COMPAT=y
 UCLIBC_CTOR_DTOR=y
 # HAS_NO_THREADS is not set

toolchain/uClibc/config/mipsel

@@ -69,7 +69,7 @@ LDSO_LDD_SUPPORT=y
 LDSO_CACHE_SUPPORT=y
 # LDSO_PRELOAD_FILE_SUPPORT is not set
 LDSO_BASE_FILENAME="ld.so"
-# LDSO_RUNPATH is not set
+LDSO_RUNPATH=y
 DL_FINI_CRT_COMPAT=y
 UCLIBC_CTOR_DTOR=y
 # HAS_NO_THREADS is not set

toolchain/uClibc/config/powerpc

@@ -67,7 +67,7 @@ LDSO_LDD_SUPPORT=y
 LDSO_CACHE_SUPPORT=y
 # LDSO_PRELOAD_FILE_SUPPORT is not set
 LDSO_BASE_FILENAME="ld.so"
-# LDSO_RUNPATH is not set
+LDSO_RUNPATH=y
 DL_FINI_CRT_COMPAT=y
 UCLIBC_CTOR_DTOR=y
 # HAS_NO_THREADS is not set

toolchain/uClibc/config/x86_64

@@ -54,7 +54,7 @@ LDSO_LDD_SUPPORT=y
 LDSO_CACHE_SUPPORT=y
 # LDSO_PRELOAD_FILE_SUPPORT is not set
 LDSO_BASE_FILENAME="ld.so"
-# LDSO_RUNPATH is not set
+LDSO_RUNPATH=y
 # DL_FINI_CRT_COMPAT is not set
 UCLIBC_CTOR_DTOR=y
 HAS_NO_THREADS=y