|
|
@@ -0,0 +1,917 @@
|
|
|
+################################################################################
|
|
|
+## Raspberry Pi Configuration Settings
|
|
|
+##
|
|
|
+## Revision 14, 2012/10/22
|
|
|
+##
|
|
|
+## Details taken from the eLinux wiki
|
|
|
+## For up-to-date information please refer to wiki page.
|
|
|
+##
|
|
|
+## Wiki Location : http://elinux.org/RPi_config.txt
|
|
|
+##
|
|
|
+##
|
|
|
+## Description:
|
|
|
+## Details of each setting are described with each section that begins with
|
|
|
+## a double hashed comment ('##')
|
|
|
+## It is up to the user to remove the single hashed comment ('#') from each
|
|
|
+## option they want to enable, and to set the specific value of that option.
|
|
|
+##
|
|
|
+## WARNING: Setting the following combination of parameters will set a
|
|
|
+## permanent bit within the SOC and your warranty is void.
|
|
|
+## over_voltage>0, and at least one of the following:
|
|
|
+## force_turbo=1
|
|
|
+## current_limit_override=0x5A000020
|
|
|
+## temp_limit>85
|
|
|
+##
|
|
|
+## Overclock settings will be disabled at runtime if the SoC reaches temp_limit
|
|
|
+##
|
|
|
+################################################################################
|
|
|
+
|
|
|
+################################################################################
|
|
|
+## Standard Definition Video Settings
|
|
|
+################################################################################
|
|
|
+
|
|
|
+## sdtv_mode
|
|
|
+## defines the TV standard for composite output
|
|
|
+##
|
|
|
+## Value Description
|
|
|
+## -------------------------------------------------------------------------
|
|
|
+## 0 Normal NTSC (Default)
|
|
|
+## 1 Japanese version of NTSC - no pedestal
|
|
|
+## 2 Normal PAL
|
|
|
+## 3 Brazilian version of PAL - 525/60 rather than 625/50, different
|
|
|
+## subcarrier
|
|
|
+##
|
|
|
+#sdtv_mode=0
|
|
|
+
|
|
|
+## sdtv_aspect
|
|
|
+## defines the aspect ratio for composite output
|
|
|
+##
|
|
|
+## Value Description
|
|
|
+## -------------------------------------------------------------------------
|
|
|
+## 1 4:3 (Default)
|
|
|
+## 2 14:9
|
|
|
+## 3 16:9
|
|
|
+##
|
|
|
+#sdtv_aspect=1
|
|
|
+
|
|
|
+## sdtv_disable_colourburst
|
|
|
+## Disables colour burst on composite output. The picture will be
|
|
|
+## monochrome, but possibly sharper
|
|
|
+##
|
|
|
+## Value Description
|
|
|
+## -------------------------------------------------------------------------
|
|
|
+## 0 Colour burst is enabled (Default)
|
|
|
+## 1 Colour burst is disabled
|
|
|
+##
|
|
|
+#sdtv_disable_colourburst=1
|
|
|
+
|
|
|
+################################################################################
|
|
|
+## High Definition Video Settings
|
|
|
+################################################################################
|
|
|
+
|
|
|
+## hdmi_safe
|
|
|
+## Use "safe mode" settings to try to boot with maximum hdmi compatibility.
|
|
|
+##
|
|
|
+## Value Description
|
|
|
+## -------------------------------------------------------------------------
|
|
|
+## 0 Disabled (Default)
|
|
|
+## 1 Enabled (this does: hdmi_force_hotplug=1, config_hdmi_boost=4,
|
|
|
+## hdmi_group=1, hdmi_mode=1,
|
|
|
+## disable_overscan=0)
|
|
|
+##
|
|
|
+#hdmi_safe=1
|
|
|
+
|
|
|
+## hdmi_force_hotplug
|
|
|
+## Pretends HDMI hotplug signal is asserted so it appears a HDMI display
|
|
|
+## is attached
|
|
|
+##
|
|
|
+## Value Description
|
|
|
+## -------------------------------------------------------------------------
|
|
|
+## 0 Disabled (Default)
|
|
|
+## 1 Use HDMI mode even if no HDMI monitor is detected
|
|
|
+##
|
|
|
+#hdmi_force_hotplug=1
|
|
|
+
|
|
|
+## hdmi_ignore_hotplug
|
|
|
+## Pretends HDMI hotplug signal is not asserted so it appears a HDMI
|
|
|
+## display is not attached
|
|
|
+##
|
|
|
+## Value Description
|
|
|
+## -------------------------------------------------------------------------
|
|
|
+## 0 Disabled (Default)
|
|
|
+## 1 Use composite mode even if HDMI monitor is detected
|
|
|
+##
|
|
|
+#hdmi_ignore_hotplug=1
|
|
|
+
|
|
|
+## hdmi_drive
|
|
|
+## chooses between HDMI and DVI modes
|
|
|
+##
|
|
|
+## Value Description
|
|
|
+## -------------------------------------------------------------------------
|
|
|
+## 1 Normal DVI mode (No sound)
|
|
|
+## 2 Normal HDMI mode (Sound will be sent if supported and enabled)
|
|
|
+##
|
|
|
+#hdmi_drive=2
|
|
|
+
|
|
|
+## hdmi_ignore_edid
|
|
|
+## Enables the ignoring of EDID/display data
|
|
|
+##
|
|
|
+#hdmi_ignore_edid=0xa5000080
|
|
|
+
|
|
|
+## hdmi_edid_file
|
|
|
+## Read the EDID data from the edid.dat file instead of from the attached
|
|
|
+## device
|
|
|
+##
|
|
|
+## Value Description
|
|
|
+## -------------------------------------------------------------------------
|
|
|
+## 0 Read EDID data from attached device (Default)
|
|
|
+## 1 Read EDID data from edid.txt file
|
|
|
+##
|
|
|
+#hdmi_edid_file=1
|
|
|
+
|
|
|
+## hdmi_force_edid_audio
|
|
|
+## Pretends all audio formats are supported by display, allowing
|
|
|
+## passthrough of DTS/AC3 even when not reported as supported.
|
|
|
+##
|
|
|
+## Value Description
|
|
|
+## -------------------------------------------------------------------------
|
|
|
+## 0 Use EDID provided values (Default)
|
|
|
+## 1 Pretend all audio formats are supported
|
|
|
+##
|
|
|
+#hdmi_force_edid_audio=1
|
|
|
+
|
|
|
+## avoid_edid_fuzzy_match
|
|
|
+## Avoid fuzzy matching of modes described in edid.
|
|
|
+##
|
|
|
+## Value Description
|
|
|
+## -------------------------------------------------------------------------
|
|
|
+## 0 Use fuzzy matching (Default)
|
|
|
+## 1 Avoid fuzzy matching
|
|
|
+##
|
|
|
+#avoid_edid_fuzzy_match=1
|
|
|
+
|
|
|
+## hdmi_group
|
|
|
+## Defines the HDMI type
|
|
|
+##
|
|
|
+## Value Description
|
|
|
+## -------------------------------------------------------------------------
|
|
|
+## 0 Use the preferred group reported by the edid (Default)
|
|
|
+## 1 CEA
|
|
|
+## 2 DMT
|
|
|
+##
|
|
|
+#hdmi_group=1
|
|
|
+
|
|
|
+## hdmi_mode
|
|
|
+## defines screen resolution in CEA or DMT format
|
|
|
+##
|
|
|
+## H means 16:9 variant (of a normally 4:3 mode).
|
|
|
+## 2x means pixel doubled (i.e. higher clock rate, with each pixel repeated
|
|
|
+## twice)
|
|
|
+## 4x means pixel quadrupled (i.e. higher clock rate, with each pixel
|
|
|
+## repeated four times)
|
|
|
+## reduced blanking means fewer bytes are used for blanking within the data
|
|
|
+## stream (i.e. lower clock rate, with fewer wasted bytes)
|
|
|
+##
|
|
|
+## Value hdmi_group=CEA hdmi_group=DMT
|
|
|
+## -------------------------------------------------------------------------
|
|
|
+## 1 VGA 640x350 85Hz
|
|
|
+## 2 480p 60Hz 640x400 85Hz
|
|
|
+## 3 480p 60Hz H 720x400 85Hz
|
|
|
+## 4 720p 60Hz 640x480 60Hz
|
|
|
+## 5 1080i 60Hz 640x480 72Hz
|
|
|
+## 6 480i 60Hz 640x480 75Hz
|
|
|
+## 7 480i 60Hz H 640x480 85Hz
|
|
|
+## 8 240p 60Hz 800x600 56Hz
|
|
|
+## 9 240p 60Hz H 800x600 60Hz
|
|
|
+## 10 480i 60Hz 4x 800x600 72Hz
|
|
|
+## 11 480i 60Hz 4x H 800x600 75Hz
|
|
|
+## 12 240p 60Hz 4x 800x600 85Hz
|
|
|
+## 13 240p 60Hz 4x H 800x600 120Hz
|
|
|
+## 14 480p 60Hz 2x 848x480 60Hz
|
|
|
+## 15 480p 60Hz 2x H 1024x768 43Hz DO NOT USE
|
|
|
+## 16 1080p 60Hz 1024x768 60Hz
|
|
|
+## 17 576p 50Hz 1024x768 70Hz
|
|
|
+## 18 576p 50Hz H 1024x768 75Hz
|
|
|
+## 19 720p 50Hz 1024x768 85Hz
|
|
|
+## 20 1080i 50Hz 1024x768 120Hz
|
|
|
+## 21 576i 50Hz 1152x864 75Hz
|
|
|
+## 22 576i 50Hz H 1280x768 reduced blanking
|
|
|
+## 23 288p 50Hz 1280x768 60Hz
|
|
|
+## 24 288p 50Hz H 1280x768 75Hz
|
|
|
+## 25 576i 50Hz 4x 1280x768 85Hz
|
|
|
+## 26 576i 50Hz 4x H 1280x768 120Hz reduced blanking
|
|
|
+## 27 288p 50Hz 4x 1280x800 reduced blanking
|
|
|
+## 28 288p 50Hz 4x H 1280x800 60Hz
|
|
|
+## 29 576p 50Hz 2x 1280x800 75Hz
|
|
|
+## 30 576p 50Hz 2x H 1280x800 85Hz
|
|
|
+## 31 1080p 50Hz 1280x800 120Hz reduced blanking
|
|
|
+## 32 1080p 24Hz 1280x960 60Hz
|
|
|
+## 33 1080p 25Hz 1280x960 85Hz
|
|
|
+## 34 1080p 30Hz 1280x960 120Hz reduced blanking
|
|
|
+## 35 480p 60Hz 4x 1280x1024 60Hz
|
|
|
+## 36 480p 60Hz 4x H 1280x1024 75Hz
|
|
|
+## 37 576p 50Hz 4x 1280x1024 85Hz
|
|
|
+## 38 576p 50Hz 4x H 1280x1024 120Hz reduced blanking
|
|
|
+## 39 1080i 50Hz reduced blanking 1360x768 60Hz
|
|
|
+## 40 1080i 100Hz 1360x768 120Hz reduced blanking
|
|
|
+## 41 720p 100Hz 1400x1050 reduced blanking
|
|
|
+## 42 576p 100Hz 1400x1050 60Hz
|
|
|
+## 43 576p 100Hz H 1400x1050 75Hz
|
|
|
+## 44 576i 100Hz 1400x1050 85Hz
|
|
|
+## 45 576i 100Hz H 1400x1050 120Hz reduced blanking
|
|
|
+## 46 1080i 120Hz 1440x900 reduced blanking
|
|
|
+## 47 720p 120Hz 1440x900 60Hz
|
|
|
+## 48 480p 120Hz 1440x900 75Hz
|
|
|
+## 49 480p 120Hz H 1440x900 85Hz
|
|
|
+## 50 480i 120Hz 1440x900 120Hz reduced blanking
|
|
|
+## 51 480i 120Hz H 1600x1200 60Hz
|
|
|
+## 52 576p 200Hz 1600x1200 65Hz
|
|
|
+## 53 576p 200Hz H 1600x1200 70Hz
|
|
|
+## 54 576i 200Hz 1600x1200 75Hz
|
|
|
+## 55 576i 200Hz H 1600x1200 85Hz
|
|
|
+## 56 480p 240Hz 1600x1200 120Hz reduced blanking
|
|
|
+## 57 480p 240Hz H 1680x1050 reduced blanking
|
|
|
+## 58 480i 240Hz 1680x1050 60Hz
|
|
|
+## 59 480i 240Hz H 1680x1050 75Hz
|
|
|
+## 60 1680x1050 85Hz
|
|
|
+## 61 1680x1050 120Hz reduced blanking
|
|
|
+## 62 1792x1344 60Hz
|
|
|
+## 63 1792x1344 75Hz
|
|
|
+## 64 1792x1344 120Hz reduced blanking
|
|
|
+## 65 1856x1392 60Hz
|
|
|
+## 66 1856x1392 75Hz
|
|
|
+## 67 1856x1392 120Hz reduced blanking
|
|
|
+## 68 1920x1200 reduced blanking
|
|
|
+## 69 1920x1200 60Hz
|
|
|
+## 70 1920x1200 75Hz
|
|
|
+## 71 1920x1200 85Hz
|
|
|
+## 72 1920x1200 120Hz reduced blanking
|
|
|
+## 73 1920x1440 60Hz
|
|
|
+## 74 1920x1440 75Hz
|
|
|
+## 75 1920x1440 120Hz reduced blanking
|
|
|
+## 76 2560x1600 reduced blanking
|
|
|
+## 77 2560x1600 60Hz
|
|
|
+## 78 2560x1600 75Hz
|
|
|
+## 79 2560x1600 85Hz
|
|
|
+## 80 2560x1600 120Hz reduced blanking
|
|
|
+## 81 1366x768 60Hz
|
|
|
+## 82 1080p 60Hz
|
|
|
+## 83 1600x900 reduced blanking
|
|
|
+## 84 2048x1152 reduced blanking
|
|
|
+## 85 720p 60Hz
|
|
|
+## 86 1366x768 reduced blanking
|
|
|
+##
|
|
|
+#hdmi_mode=1
|
|
|
+
|
|
|
+## config_hdmi_boost
|
|
|
+## configure the signal strength of the HDMI interface.
|
|
|
+##
|
|
|
+## Value Description
|
|
|
+## -------------------------------------------------------------------------
|
|
|
+## 0 (Default)
|
|
|
+## 1
|
|
|
+## 2
|
|
|
+## 3
|
|
|
+## 4 Try if you have interference issues with HDMI
|
|
|
+## 5
|
|
|
+## 6
|
|
|
+## 7 Maximum
|
|
|
+##
|
|
|
+#config_hdmi_boost=0
|
|
|
+
|
|
|
+## hdmi_ignore_cec_init
|
|
|
+## Doesn't sent initial active source message. Avoids bringing
|
|
|
+## (CEC enabled) TV out of standby and channel switch when rebooting.
|
|
|
+##
|
|
|
+## Value Description
|
|
|
+## -------------------------------------------------------------------------
|
|
|
+## 0 Normal behaviour (Default)
|
|
|
+## 1 Doesn't sent initial active source message
|
|
|
+##
|
|
|
+#hdmi_ignore_cec_init=1
|
|
|
+
|
|
|
+## hdmi_ignore_cec
|
|
|
+## Pretends CEC is not supported at all by TV.
|
|
|
+## No CEC functions will be supported.
|
|
|
+##
|
|
|
+## Value Description
|
|
|
+## -------------------------------------------------------------------------
|
|
|
+## 0 Normal behaviour (Default)
|
|
|
+## 1 Pretend CEC is not supported by TV
|
|
|
+##
|
|
|
+#hdmi_ignore_cec=1
|
|
|
+
|
|
|
+################################################################################
|
|
|
+## Overscan Video Settings
|
|
|
+################################################################################
|
|
|
+
|
|
|
+## overscan_left
|
|
|
+## Number of pixels to skip on left
|
|
|
+##
|
|
|
+#overscan_left=0
|
|
|
+
|
|
|
+## overscan_right
|
|
|
+## Number of pixels to skip on right
|
|
|
+##
|
|
|
+#overscan_right=0
|
|
|
+
|
|
|
+## overscan_top
|
|
|
+## Number of pixels to skip on top
|
|
|
+##
|
|
|
+#overscan_top=0
|
|
|
+
|
|
|
+## overscan_bottom
|
|
|
+## Number of pixels to skip on bottom
|
|
|
+##
|
|
|
+#overscan_bottom=0
|
|
|
+
|
|
|
+## disable_overscan
|
|
|
+## Set to 1 to disable overscan
|
|
|
+##
|
|
|
+## Value Description
|
|
|
+## -------------------------------------------------------------------------
|
|
|
+## 0 Overscan Enabled (Default)
|
|
|
+## 1 Overscan Disabled
|
|
|
+##
|
|
|
+#disable_overscan=1
|
|
|
+
|
|
|
+################################################################################
|
|
|
+## Framebuffer Video Settings
|
|
|
+################################################################################
|
|
|
+
|
|
|
+## framebuffer_width
|
|
|
+## Console framebuffer width in pixels. Default is display width minus
|
|
|
+## overscan.
|
|
|
+##
|
|
|
+#framebuffer_width=0
|
|
|
+
|
|
|
+## framebuffer_height
|
|
|
+## Console framebuffer height in pixels. Default is display height minus
|
|
|
+## overscan.
|
|
|
+##
|
|
|
+#framebuffer_height=0
|
|
|
+
|
|
|
+## framebuffer_depth
|
|
|
+## Console framebuffer depth in bits per pixel.
|
|
|
+##
|
|
|
+## Value Description
|
|
|
+## -------------------------------------------------------------------------
|
|
|
+## 8 Valid, but default RGB palette makes an unreadable screen
|
|
|
+## 16 (Default)
|
|
|
+## 24 Looks better but has corruption issues as of 2012/06/15
|
|
|
+## 32 Has no corruption issues but needs framebuffer_ignore_alpha=1
|
|
|
+## and shows the wrong colors as of 2012/06/15
|
|
|
+##
|
|
|
+#framebuffer_depth=16
|
|
|
+
|
|
|
+## framebuffer_ignore_alpha
|
|
|
+## Set to 1 to disable alpha channel. Helps with 32bit.
|
|
|
+##
|
|
|
+## Value Description
|
|
|
+## -------------------------------------------------------------------------
|
|
|
+## 0 Enable Alpha Channel (Default)
|
|
|
+## 1 Disable Alpha Channel
|
|
|
+##
|
|
|
+#framebuffer_ignore_alpha=0
|
|
|
+
|
|
|
+################################################################################
|
|
|
+## General Video Settings
|
|
|
+################################################################################
|
|
|
+
|
|
|
+## display_rotate
|
|
|
+## Rotate the display clockwise or flip the display.
|
|
|
+## The 90 and 270 degrees rotation options require additional memory on GPU,
|
|
|
+## so won't work with the 16M GPU split.
|
|
|
+##
|
|
|
+## Value Description
|
|
|
+## -------------------------------------------------------------------------
|
|
|
+## 0 0 degrees (Default)
|
|
|
+## 1 90 degrees
|
|
|
+## 2 180 degrees
|
|
|
+## 3 270 degrees
|
|
|
+## 0x10000 Horizontal flip
|
|
|
+## 0x20000 Vertical flip
|
|
|
+##
|
|
|
+#display_rotate=0
|
|
|
+
|
|
|
+################################################################################
|
|
|
+## Licensed Codecs
|
|
|
+##
|
|
|
+## Hardware decoding of additional codecs can be enabled by purchasing a
|
|
|
+## license that is locked to the CPU serial number of your Raspberry Pi.
|
|
|
+##
|
|
|
+## Up to 8 licenses per CODEC can be specified as a comma seperated list.
|
|
|
+##
|
|
|
+################################################################################
|
|
|
+
|
|
|
+## decode_MPG2
|
|
|
+## License key to allow hardware MPEG-2 decoding.
|
|
|
+##
|
|
|
+#decode_MPG2=0x12345678
|
|
|
+
|
|
|
+## decode_WVC1
|
|
|
+## License key to allow hardware VC-1 decoding.
|
|
|
+##
|
|
|
+#decode_WVC1=0x12345678
|
|
|
+
|
|
|
+################################################################################
|
|
|
+## Test Settings
|
|
|
+################################################################################
|
|
|
+
|
|
|
+## test_mode
|
|
|
+## Enable test sound/image during boot for manufacturing test.
|
|
|
+##
|
|
|
+## Value Description
|
|
|
+## -------------------------------------------------------------------------
|
|
|
+## 0 Disable Test Mod (Default)
|
|
|
+## 1 Enable Test Mode
|
|
|
+##
|
|
|
+#test_mode=0
|
|
|
+
|
|
|
+################################################################################
|
|
|
+## Memory Settings
|
|
|
+################################################################################
|
|
|
+
|
|
|
+## disable_l2cache
|
|
|
+## Disable arm access to GPU's L2 cache. Needs corresponding L2 disabled
|
|
|
+## kernel.
|
|
|
+##
|
|
|
+## Value Description
|
|
|
+## -------------------------------------------------------------------------
|
|
|
+## 0 Enable L2 Cache (Default)
|
|
|
+## 1 Disable L2 cache
|
|
|
+##
|
|
|
+#disable_l2cache=0
|
|
|
+
|
|
|
+## gpu_mem
|
|
|
+## GPU memory allocation in MB for all board revisions.
|
|
|
+##
|
|
|
+## Default 64
|
|
|
+##
|
|
|
+#gpu_mem=128
|
|
|
+
|
|
|
+## gpu_mem_256
|
|
|
+## GPU memory allocation in MB for 256MB board revision.
|
|
|
+## This option overrides gpu_mem.
|
|
|
+##
|
|
|
+#gpu_mem_256=128
|
|
|
+
|
|
|
+## gpu_mem_512
|
|
|
+## GPU memory allocation in MB for 512MB board revision.
|
|
|
+## This option overrides gpu_mem.
|
|
|
+##
|
|
|
+#gpu_mem_512=128
|
|
|
+
|
|
|
+################################################################################
|
|
|
+## Boot Option Settings
|
|
|
+################################################################################
|
|
|
+
|
|
|
+## disable_commandline_tags
|
|
|
+## Stop start.elf from filling in ATAGS (memory from 0x100) before
|
|
|
+## launching kernel
|
|
|
+##
|
|
|
+#disable_commandline_tags=0
|
|
|
+
|
|
|
+## cmdline (string)
|
|
|
+## Command line parameters. Can be used instead of cmdline.txt file
|
|
|
+##
|
|
|
+#cmdline=""
|
|
|
+
|
|
|
+## kernel (string)
|
|
|
+## Alternative name to use when loading kernel.
|
|
|
+##
|
|
|
+#kernel=""
|
|
|
+
|
|
|
+## kernel_address
|
|
|
+## Address to load kernel.img file at
|
|
|
+##
|
|
|
+#kernel_address=0x00000000
|
|
|
+
|
|
|
+## ramfsfile (string)
|
|
|
+## ramfs file to load
|
|
|
+##
|
|
|
+#ramfsfile=""
|
|
|
+
|
|
|
+## ramfsaddr
|
|
|
+## Address to load ramfs file at
|
|
|
+##
|
|
|
+#ramfsaddr=0x00000000
|
|
|
+
|
|
|
+## initramfs (string address)
|
|
|
+## ramfs file and address to load it at (it's like ramfsfile+ramfsaddr in
|
|
|
+## one option).
|
|
|
+##
|
|
|
+## NOTE: this option uses different syntax than all other options - you
|
|
|
+## should not use "=" character here.
|
|
|
+##
|
|
|
+#initramfs initramf.gz 0x00800000
|
|
|
+
|
|
|
+## device_tree_address
|
|
|
+## Address to load device_tree at
|
|
|
+##
|
|
|
+#device_tree_address=0x00000000
|
|
|
+
|
|
|
+## init_uart_baud
|
|
|
+## Initial uart baud rate.
|
|
|
+##
|
|
|
+## Default 115200
|
|
|
+##
|
|
|
+#init_uart_baud=115200
|
|
|
+
|
|
|
+## init_uart_clock
|
|
|
+## Initial uart clock.
|
|
|
+##
|
|
|
+## Default 3000000 (3MHz)
|
|
|
+##
|
|
|
+#init_uart_clock=3000000
|
|
|
+
|
|
|
+## init_emmc_clock
|
|
|
+## Initial emmc clock, increasing this can speedup your SD-card.
|
|
|
+##
|
|
|
+## Default 100000000 (100mhz)
|
|
|
+##
|
|
|
+#init_emmc_clock=100000000
|
|
|
+
|
|
|
+## boot_delay
|
|
|
+## Wait for a given number of seconds in start.elf before loading
|
|
|
+## kernel.img.
|
|
|
+##
|
|
|
+## delay = (1000 * boot_delay) + boot_delay_ms
|
|
|
+##
|
|
|
+## Default 1
|
|
|
+##
|
|
|
+#boot_delay=0
|
|
|
+
|
|
|
+## boot_delay_ms
|
|
|
+## Wait for a given number of milliseconds in start.elf before loading
|
|
|
+## kernel.img.
|
|
|
+##
|
|
|
+## delay = (1000 * boot_delay) + boot_delay_ms
|
|
|
+##
|
|
|
+## Default 0
|
|
|
+##
|
|
|
+#boot_delay_ms=0
|
|
|
+
|
|
|
+## avoid_safe_mode
|
|
|
+## Adding a jumper between pins 5 & 6 of P1 enables a recovery Safe Mode.
|
|
|
+## If pins 5 & 6 are used for connecting to external devices (e.g. GPIO),
|
|
|
+## then this setting can be used to ensure Safe Mode is not triggered.
|
|
|
+##
|
|
|
+## Value Description
|
|
|
+## -------------------------------------------------------------------------
|
|
|
+## 0 Respect Safe Mode input (Default)
|
|
|
+## 1 Ignore Safe Mode input
|
|
|
+##
|
|
|
+#avoid_safe_mode=1
|
|
|
+
|
|
|
+################################################################################
|
|
|
+## Overclocking Settings
|
|
|
+##
|
|
|
+## ARM, SDRAM and GPU each have their own PLLs and can have unrelated
|
|
|
+## frequencies.
|
|
|
+##
|
|
|
+## The GPU core, h264, v3d and isp share a PLL, so need to have related
|
|
|
+## frequencies.
|
|
|
+## pll_freq = floor(2400 / (2 * core_freq)) * (2 * core_freq)
|
|
|
+## gpu_freq = pll_freq / [even number]
|
|
|
+##
|
|
|
+## The effective gpu_freq is automatically rounded to nearest even integer, so
|
|
|
+## asking for core_freq = 500 and gpu_freq = 300 will result in divisor of
|
|
|
+## 2000/300 = 6.666 => 6 and so 333.33MHz.
|
|
|
+##
|
|
|
+##
|
|
|
+## Standard Profiles:
|
|
|
+## arm_freq core_freq sdram_freq over_voltage
|
|
|
+## -------------------------------------------------------------------------
|
|
|
+## None 700 250 400 0
|
|
|
+## Modest 800 300 400 0
|
|
|
+## Medium 900 333 450 2
|
|
|
+## High 950 450 450 6
|
|
|
+## Turbo 1000 500 500 6
|
|
|
+##
|
|
|
+################################################################################
|
|
|
+
|
|
|
+## force_turbo
|
|
|
+## Control the kernel "ondemand" governor. It has no effect if no overclock
|
|
|
+## settings are specified.
|
|
|
+##
|
|
|
+## Value Description
|
|
|
+## -------------------------------------------------------------------------
|
|
|
+## 0 Enable dynamic clocks and voltage for the ARM core, GPU core and
|
|
|
+## SDRAM (Default).
|
|
|
+## Overclocking of h264_freq, v3d_freq and isp_freq is ignored.
|
|
|
+## 1 Disable dynamic clocks and voltage for the ARM core, GPU core
|
|
|
+## and SDRAM.
|
|
|
+## Overclocking of h264_freq, v3d_freq and isp_freq is allowed.
|
|
|
+##
|
|
|
+#force_turbo=0
|
|
|
+
|
|
|
+## initial_turbo
|
|
|
+## Enables turbo mode from boot for the given value in seconds (up to 60)
|
|
|
+## or until cpufreq sets a frequency. Can help with sdcard corruption if
|
|
|
+## overclocked.
|
|
|
+##
|
|
|
+## Default 0
|
|
|
+##
|
|
|
+#initial_turbo=0
|
|
|
+
|
|
|
+## temp_limit
|
|
|
+## Overheat protection. Sets clocks and voltages to default when the SoC
|
|
|
+## reaches this Celsius value.
|
|
|
+## Setting this higher than default voids warranty.
|
|
|
+##
|
|
|
+## Default 85
|
|
|
+##
|
|
|
+#temp_limit=85
|
|
|
+
|
|
|
+## arm_freq
|
|
|
+## Frequency of ARM in MHz.
|
|
|
+##
|
|
|
+## Default 700.
|
|
|
+##
|
|
|
+#arm_freq=700
|
|
|
+
|
|
|
+## arm_freq_min
|
|
|
+## Minimum frequency of ARM in MHz (used for dynamic clocking).
|
|
|
+##
|
|
|
+## Default 700.
|
|
|
+##
|
|
|
+#arm_freq_min=700
|
|
|
+
|
|
|
+## gpu_freq
|
|
|
+## Sets core_freq, h264_freq, isp_freq, v3d_freq together.
|
|
|
+##
|
|
|
+## Default 250.
|
|
|
+##
|
|
|
+#gpu_freq=250
|
|
|
+
|
|
|
+## core_freq
|
|
|
+## Frequency of GPU processor core in MHz. It has an impact on ARM
|
|
|
+## performance since it drives L2 cache.
|
|
|
+##
|
|
|
+## Default 250.
|
|
|
+##
|
|
|
+#core_freq=250
|
|
|
+
|
|
|
+## core_freq_min
|
|
|
+## Minimum frequency of GPU processor core in MHz (used for dynamic
|
|
|
+## clocking). It has an impact on ARM performance since it drives L2 cache.
|
|
|
+##
|
|
|
+## Default 250.
|
|
|
+##
|
|
|
+#core_freq_min=250
|
|
|
+
|
|
|
+## h264_freq
|
|
|
+## Frequency of hardware video block in MHz.
|
|
|
+##
|
|
|
+## Default 250.
|
|
|
+##
|
|
|
+#h264_freq=250
|
|
|
+
|
|
|
+## isp_freq
|
|
|
+## Frequency of image sensor pipeline block in MHz.
|
|
|
+##
|
|
|
+## Default 250.
|
|
|
+##
|
|
|
+#isp_freq=250
|
|
|
+
|
|
|
+## v3d_freq
|
|
|
+## Frequency of 3D block in MHz.
|
|
|
+##
|
|
|
+## Default 250.
|
|
|
+##
|
|
|
+#v3d_freq=250
|
|
|
+
|
|
|
+## sdram_freq
|
|
|
+## Frequency of SDRAM in MHz.
|
|
|
+##
|
|
|
+## Default 400.
|
|
|
+##
|
|
|
+#sdram_freq=400
|
|
|
+
|
|
|
+## sdram_freq_min
|
|
|
+## Minimum frequency of SDRAM in MHz (used for dynamic clocking).
|
|
|
+##
|
|
|
+## Default 400.
|
|
|
+##
|
|
|
+#sdram_freq_min=400
|
|
|
+
|
|
|
+## avoid_pwm_pll
|
|
|
+## Unlink core_freq from the rest of the gpu. Analog audio should still
|
|
|
+## work, but from a fractional divider, so lower quality.
|
|
|
+##
|
|
|
+## Value Description
|
|
|
+## -------------------------------------------------------------------------
|
|
|
+## 0 Linked core_freq (Default)
|
|
|
+## 1 Unlinked core_freq
|
|
|
+##
|
|
|
+#avoid_pwm_pll=1
|
|
|
+
|
|
|
+################################################################################
|
|
|
+## Voltage Settings
|
|
|
+################################################################################
|
|
|
+
|
|
|
+## current_limit_override
|
|
|
+## Disables SMPS current limit protection. Can help if you are currently
|
|
|
+## hitting a reboot failure when overclocking too high.
|
|
|
+##
|
|
|
+#current_limit_override=0x5A000020
|
|
|
+
|
|
|
+## over_voltage
|
|
|
+## ARM/GPU core voltage adjust.
|
|
|
+##
|
|
|
+## Value Description
|
|
|
+## -------------------------------------------------------------------------
|
|
|
+## -16 0.8 V
|
|
|
+## -15 0.825 V
|
|
|
+## -14 0.85 V
|
|
|
+## -13 0.875 V
|
|
|
+## -12 0.9 V
|
|
|
+## -11 0.925 V
|
|
|
+## -10 0.95 V
|
|
|
+## -9 0.975 V
|
|
|
+## -8 1.0 V
|
|
|
+## -7 1.025 V
|
|
|
+## -6 1.05 V
|
|
|
+## -5 1.075 V
|
|
|
+## -4 1.1 V
|
|
|
+## -3 1.125 V
|
|
|
+## -2 1.15 V
|
|
|
+## -1 1.175 V
|
|
|
+## 0 1.2 V (Default)
|
|
|
+## 1 1.225 V
|
|
|
+## 2 1.25 V
|
|
|
+## 3 1.275 V
|
|
|
+## 4 1.3 V
|
|
|
+## 5 1.325 V
|
|
|
+## 6 1.35 V
|
|
|
+## 7 1.375 V (requires force_turbo=1)
|
|
|
+## 8 1.4 V (requires force_turbo=1)
|
|
|
+##
|
|
|
+#over_voltage=0
|
|
|
+
|
|
|
+## over_voltage_min
|
|
|
+## Minimum ARM/GPU core voltage adjust (used for dynamic clocking).
|
|
|
+##
|
|
|
+## Value Description
|
|
|
+## -------------------------------------------------------------------------
|
|
|
+## -16 0.8 V
|
|
|
+## -15 0.825 V
|
|
|
+## -14 0.85 V
|
|
|
+## -13 0.875 V
|
|
|
+## -12 0.9 V
|
|
|
+## -11 0.925 V
|
|
|
+## -10 0.95 V
|
|
|
+## -9 0.975 V
|
|
|
+## -8 1.0 V
|
|
|
+## -7 1.025 V
|
|
|
+## -6 1.05 V
|
|
|
+## -5 1.075 V
|
|
|
+## -4 1.1 V
|
|
|
+## -3 1.125 V
|
|
|
+## -2 1.15 V
|
|
|
+## -1 1.175 V
|
|
|
+## 0 1.2 V (Default)
|
|
|
+## 1 1.225 V
|
|
|
+## 2 1.25 V
|
|
|
+## 3 1.275 V
|
|
|
+## 4 1.3 V
|
|
|
+## 5 1.325 V
|
|
|
+## 6 1.35 V
|
|
|
+## 7 1.375 V (requires force_turbo=1)
|
|
|
+## 8 1.4 V (requires force_turbo=1)
|
|
|
+##
|
|
|
+#over_voltage_min=0
|
|
|
+
|
|
|
+## over_voltage_sdram
|
|
|
+## Sets over_voltage_sdram_c, over_voltage_sdram_i, over_voltage_sdram_p
|
|
|
+## together
|
|
|
+##
|
|
|
+## Value Description
|
|
|
+## -------------------------------------------------------------------------
|
|
|
+## -16 0.8 V
|
|
|
+## -15 0.825 V
|
|
|
+## -14 0.85 V
|
|
|
+## -13 0.875 V
|
|
|
+## -12 0.9 V
|
|
|
+## -11 0.925 V
|
|
|
+## -10 0.95 V
|
|
|
+## -9 0.975 V
|
|
|
+## -8 1.0 V
|
|
|
+## -7 1.025 V
|
|
|
+## -6 1.05 V
|
|
|
+## -5 1.075 V
|
|
|
+## -4 1.1 V
|
|
|
+## -3 1.125 V
|
|
|
+## -2 1.15 V
|
|
|
+## -1 1.175 V
|
|
|
+## 0 1.2 V (Default)
|
|
|
+## 1 1.225 V
|
|
|
+## 2 1.25 V
|
|
|
+## 3 1.275 V
|
|
|
+## 4 1.3 V
|
|
|
+## 5 1.325 V
|
|
|
+## 6 1.35 V
|
|
|
+## 7 1.375 V
|
|
|
+## 8 1.4 V
|
|
|
+##
|
|
|
+#over_voltage_sdram=0
|
|
|
+
|
|
|
+## over_voltage_sdram_c
|
|
|
+## SDRAM controller voltage adjust.
|
|
|
+##
|
|
|
+## Value Description
|
|
|
+## -------------------------------------------------------------------------
|
|
|
+## -16 0.8 V
|
|
|
+## -15 0.825 V
|
|
|
+## -14 0.85 V
|
|
|
+## -13 0.875 V
|
|
|
+## -12 0.9 V
|
|
|
+## -11 0.925 V
|
|
|
+## -10 0.95 V
|
|
|
+## -9 0.975 V
|
|
|
+## -8 1.0 V
|
|
|
+## -7 1.025 V
|
|
|
+## -6 1.05 V
|
|
|
+## -5 1.075 V
|
|
|
+## -4 1.1 V
|
|
|
+## -3 1.125 V
|
|
|
+## -2 1.15 V
|
|
|
+## -1 1.175 V
|
|
|
+## 0 1.2 V (Default)
|
|
|
+## 1 1.225 V
|
|
|
+## 2 1.25 V
|
|
|
+## 3 1.275 V
|
|
|
+## 4 1.3 V
|
|
|
+## 5 1.325 V
|
|
|
+## 6 1.35 V
|
|
|
+## 7 1.375 V
|
|
|
+## 8 1.4 V
|
|
|
+##
|
|
|
+#over_voltage_sdram_c=0
|
|
|
+
|
|
|
+## over_voltage_sdram_i
|
|
|
+## SDRAM I/O voltage adjust.
|
|
|
+##
|
|
|
+## Value Description
|
|
|
+## -------------------------------------------------------------------------
|
|
|
+## -16 0.8 V
|
|
|
+## -15 0.825 V
|
|
|
+## -14 0.85 V
|
|
|
+## -13 0.875 V
|
|
|
+## -12 0.9 V
|
|
|
+## -11 0.925 V
|
|
|
+## -10 0.95 V
|
|
|
+## -9 0.975 V
|
|
|
+## -8 1.0 V
|
|
|
+## -7 1.025 V
|
|
|
+## -6 1.05 V
|
|
|
+## -5 1.075 V
|
|
|
+## -4 1.1 V
|
|
|
+## -3 1.125 V
|
|
|
+## -2 1.15 V
|
|
|
+## -1 1.175 V
|
|
|
+## 0 1.2 V (Default)
|
|
|
+## 1 1.225 V
|
|
|
+## 2 1.25 V
|
|
|
+## 3 1.275 V
|
|
|
+## 4 1.3 V
|
|
|
+## 5 1.325 V
|
|
|
+## 6 1.35 V
|
|
|
+## 7 1.375 V
|
|
|
+## 8 1.4 V
|
|
|
+##
|
|
|
+#over_voltage_sdram_i=0
|
|
|
+
|
|
|
+## over_voltage_sdram_p
|
|
|
+## SDRAM phy voltage adjust.
|
|
|
+##
|
|
|
+## Value Description
|
|
|
+## -------------------------------------------------------------------------
|
|
|
+## -16 0.8 V
|
|
|
+## -15 0.825 V
|
|
|
+## -14 0.85 V
|
|
|
+## -13 0.875 V
|
|
|
+## -12 0.9 V
|
|
|
+## -11 0.925 V
|
|
|
+## -10 0.95 V
|
|
|
+## -9 0.975 V
|
|
|
+## -8 1.0 V
|
|
|
+## -7 1.025 V
|
|
|
+## -6 1.05 V
|
|
|
+## -5 1.075 V
|
|
|
+## -4 1.1 V
|
|
|
+## -3 1.125 V
|
|
|
+## -2 1.15 V
|
|
|
+## -1 1.175 V
|
|
|
+## 0 1.2 V (Default)
|
|
|
+## 1 1.225 V
|
|
|
+## 2 1.25 V
|
|
|
+## 3 1.275 V
|
|
|
+## 4 1.3 V
|
|
|
+## 5 1.325 V
|
|
|
+## 6 1.35 V
|
|
|
+## 7 1.375 V
|
|
|
+## 8 1.4 V
|
|
|
+##
|
|
|
+#over_voltage_sdram_p=0
|
Jonas Gorski