uboot-rockchip: update to v2021.04

Update the uboot-rockchip to the latest upstream release.
Remove upstreamed patches.

Tested-on: FriendlyElec NanoPi R2S

Signed-off-by: David Bauer <[email protected]>

package/boot/uboot-rockchip/Makefile

@@ -5,10 +5,10 @@
 include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
-PKG_VERSION:=2021.01
+PKG_VERSION:=2021.04
 PKG_RELEASE:=1
 
-PKG_HASH:=b407e1510a74e863b8b5cb42a24625344f0e0c2fc7582d8c866bd899367d0454
+PKG_HASH:=0d438b1bb5cceb57a18ea2de4a0d51f7be5b05b98717df05938636e0aadfe11a
 
 PKG_MAINTAINER:=Tobias Maedel <[email protected]>
 
@@ -75,7 +75,7 @@ ifneq ($(OF_PLATDATA),)
 	mkdir -p $(PKG_BUILD_DIR)/tpl/dts
 	mkdir -p $(PKG_BUILD_DIR)/include/generated
 
-	$(CP) $(PKG_BUILD_DIR)/of-platdata/$(OF_PLATDATA)/dt-platdata.c $(PKG_BUILD_DIR)/tpl/dts/dt-platdata.c
+	$(CP) $(PKG_BUILD_DIR)/of-platdata/$(OF_PLATDATA)/dt-plat.c $(PKG_BUILD_DIR)/tpl/dts/dt-plat.c
 	$(CP) $(PKG_BUILD_DIR)/of-platdata/$(OF_PLATDATA)/dt-structs-gen.h $(PKG_BUILD_DIR)/include/generated/dt-structs-gen.h
 endif
 

package/boot/uboot-rockchip/patches/002-spl-remove-dtoc-of-pdata-generation.patch

@@ -17,15 +17,13 @@ Signed-off-by: David Bauer <[email protected]>
 
 --- a/scripts/Makefile.spl
 +++ b/scripts/Makefile.spl
-@@ -321,12 +321,6 @@ PHONY += dts_dir
+@@ -329,10 +329,6 @@ PHONY += dts_dir
  dts_dir:
  	$(shell [ -d $(obj)/dts ] || mkdir -p $(obj)/dts)
  
--include/generated/dt-structs-gen.h: $(obj)/$(SPL_BIN).dtb dts_dir FORCE
--	$(call if_changed,dtoch)
--
--$(obj)/dts/dt-platdata.c: $(obj)/$(SPL_BIN).dtb dts_dir FORCE
--	$(call if_changed,dtocc)
+-include/generated/dt-structs-gen.h $(u-boot-spl-platdata_c) &: \
+-		$(obj)/$(SPL_BIN).dtb dts_dir FORCE
+-	$(call if_changed,dtoc)
 -
  ifdef CONFIG_SAMSUNG
  ifdef CONFIG_VAR_SIZE_SPL

package/boot/uboot-rockchip/patches/100-rockchip-rk3328-Add-support-for-FriendlyARM-NanoPi-R.patch

@@ -1,571 +0,0 @@
-From 4189a8db90ca7edc16cf9509576ca2e74f028c1c Mon Sep 17 00:00:00 2001
-From: David Bauer <[email protected]>
-Date: Thu, 7 Jan 2021 00:05:46 +0100
-Subject: [PATCH] rockchip: rk3328: Add support for FriendlyARM NanoPi R2S
-
-This adds support for the NanoPi R2S from FriendlyArm.
-
-Rockchip RK3328 SoC
-1GB DDR4 RAM
-Gigabit Ethernet (WAN)
-Gigabit Ethernet (USB3) (LAN)
-USB 2.0 Host Port
-MicroSD slot
-Reset button
-WAN - LAN - SYS LED
-
-Signed-off-by: David Bauer <[email protected]>
----
- arch/arm/dts/Makefile                      |   1 +
- arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi |  40 +++
- arch/arm/dts/rk3328-nanopi-r2s.dts         | 370 +++++++++++++++++++++
- board/rockchip/evb_rk3328/MAINTAINERS      |   7 +
- configs/nanopi-r2s-rk3328_defconfig        |  98 ++++++
- 5 files changed, 516 insertions(+)
- create mode 100644 arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi
- create mode 100644 arch/arm/dts/rk3328-nanopi-r2s.dts
- create mode 100644 configs/nanopi-r2s-rk3328_defconfig
-
---- a/arch/arm/dts/Makefile
-+++ b/arch/arm/dts/Makefile
-@@ -110,6 +110,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3308) += \
- 
- dtb-$(CONFIG_ROCKCHIP_RK3328) += \
- 	rk3328-evb.dtb \
-+	rk3328-nanopi-r2s.dtb \
- 	rk3328-roc-cc.dtb \
- 	rk3328-rock64.dtb \
- 	rk3328-rock-pi-e.dtb
---- /dev/null
-+++ b/arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi
-@@ -0,0 +1,40 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+/*
-+ * (C) Copyright 2018-2019 Rockchip Electronics Co., Ltd
-+ * (C) Copyright 2020 David Bauer
-+ */
-+
-+#include "rk3328-u-boot.dtsi"
-+#include "rk3328-sdram-ddr4-666.dtsi"
-+/ {
-+	chosen {
-+		u-boot,spl-boot-order = "same-as-spl", &sdmmc, &emmc;
-+	};
-+};
-+
-+&gpio0 {
-+	u-boot,dm-spl;
-+};
-+
-+&pinctrl {
-+	u-boot,dm-spl;
-+};
-+
-+&sdmmc0m1_gpio {
-+	u-boot,dm-spl;
-+};
-+
-+&pcfg_pull_up_4ma {
-+	u-boot,dm-spl;
-+};
-+
-+/* Need this and all the pinctrl/gpio stuff above to set pinmux */
-+&vcc_sd {
-+	u-boot,dm-spl;
-+};
-+
-+&gmac2io {
-+	snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
-+	snps,reset-active-low;
-+	snps,reset-delays-us = <0 10000 50000>;
-+};
---- /dev/null
-+++ b/arch/arm/dts/rk3328-nanopi-r2s.dts
-@@ -0,0 +1,370 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright (c) 2020 David Bauer <[email protected]>
-+ */
-+
-+/dts-v1/;
-+
-+#include <dt-bindings/input/input.h>
-+#include <dt-bindings/gpio/gpio.h>
-+#include "rk3328.dtsi"
-+
-+/ {
-+	model = "FriendlyElec NanoPi R2S";
-+	compatible = "friendlyarm,nanopi-r2s", "rockchip,rk3328";
-+
-+	chosen {
-+		stdout-path = "serial2:1500000n8";
-+	};
-+
-+	gmac_clk: gmac-clock {
-+		compatible = "fixed-clock";
-+		clock-frequency = <125000000>;
-+		clock-output-names = "gmac_clkin";
-+		#clock-cells = <0>;
-+	};
-+
-+	keys {
-+		compatible = "gpio-keys";
-+		pinctrl-0 = <&reset_button_pin>;
-+		pinctrl-names = "default";
-+
-+		reset {
-+			label = "reset";
-+			gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
-+			linux,code = <KEY_RESTART>;
-+			debounce-interval = <50>;
-+		};
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+		pinctrl-0 = <&lan_led_pin>,  <&sys_led_pin>, <&wan_led_pin>;
-+		pinctrl-names = "default";
-+
-+		lan_led: led-0 {
-+			gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
-+			label = "nanopi-r2s:green:lan";
-+		};
-+
-+		sys_led: led-1 {
-+			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
-+			label = "nanopi-r2s:red:sys";
-+		};
-+
-+		wan_led: led-2 {
-+			gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>;
-+			label = "nanopi-r2s:green:wan";
-+		};
-+	};
-+
-+	vcc_io_sdio: sdmmcio-regulator {
-+		compatible = "regulator-gpio";
-+		enable-active-high;
-+		gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>;
-+		pinctrl-0 = <&sdio_vcc_pin>;
-+		pinctrl-names = "default";
-+		regulator-name = "vcc_io_sdio";
-+		regulator-always-on;
-+		regulator-min-microvolt = <1800000>;
-+		regulator-max-microvolt = <3300000>;
-+		regulator-settling-time-us = <5000>;
-+		regulator-type = "voltage";
-+		startup-delay-us = <2000>;
-+		states = <1800000 0x1
-+			  3300000 0x0>;
-+		vin-supply = <&vcc_io_33>;
-+	};
-+
-+	vcc_sd: sdmmc-regulator {
-+		compatible = "regulator-fixed";
-+		gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
-+		pinctrl-0 = <&sdmmc0m1_gpio>;
-+		pinctrl-names = "default";
-+		regulator-name = "vcc_sd";
-+		regulator-boot-on;
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		vin-supply = <&vcc_io_33>;
-+	};
-+
-+	vdd_5v: vdd-5v {
-+		compatible = "regulator-fixed";
-+		regulator-name = "vdd_5v";
-+		regulator-always-on;
-+		regulator-boot-on;
-+		regulator-min-microvolt = <5000000>;
-+		regulator-max-microvolt = <5000000>;
-+	};
-+};
-+
-+&cpu0 {
-+	cpu-supply = <&vdd_arm>;
-+};
-+
-+&cpu1 {
-+	cpu-supply = <&vdd_arm>;
-+};
-+
-+&cpu2 {
-+	cpu-supply = <&vdd_arm>;
-+};
-+
-+&cpu3 {
-+	cpu-supply = <&vdd_arm>;
-+};
-+
-+&gmac2io {
-+	assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
-+	assigned-clock-parents = <&gmac_clk>, <&gmac_clk>;
-+	clock_in_out = "input";
-+	phy-handle = <&rtl8211e>;
-+	phy-mode = "rgmii";
-+	phy-supply = <&vcc_io_33>;
-+	pinctrl-0 = <&rgmiim1_pins>;
-+	pinctrl-names = "default";
-+	rx_delay = <0x18>;
-+	snps,aal;
-+	tx_delay = <0x24>;
-+	status = "okay";
-+
-+	mdio {
-+		compatible = "snps,dwmac-mdio";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		rtl8211e: ethernet-phy@1 {
-+			compatible = "ethernet-phy-id001c.c915",
-+				     "ethernet-phy-ieee802.3-c22";
-+			reg = <1>;
-+			pinctrl-0 = <&eth_phy_reset_pin>;
-+			pinctrl-names = "default";
-+			reset-assert-us = <10000>;
-+			reset-deassert-us = <50000>;
-+			reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+};
-+
-+&i2c1 {
-+	status = "okay";
-+
-+	rk805: pmic@18 {
-+		compatible = "rockchip,rk805";
-+		reg = <0x18>;
-+		interrupt-parent = <&gpio1>;
-+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
-+		#clock-cells = <1>;
-+		clock-output-names = "xin32k", "rk805-clkout2";
-+		gpio-controller;
-+		#gpio-cells = <2>;
-+		pinctrl-0 = <&pmic_int_l>;
-+		pinctrl-names = "default";
-+		rockchip,system-power-controller;
-+		wakeup-source;
-+
-+		vcc1-supply = <&vdd_5v>;
-+		vcc2-supply = <&vdd_5v>;
-+		vcc3-supply = <&vdd_5v>;
-+		vcc4-supply = <&vdd_5v>;
-+		vcc5-supply = <&vcc_io_33>;
-+		vcc6-supply = <&vdd_5v>;
-+
-+		regulators {
-+			vdd_log: DCDC_REG1 {
-+				regulator-name = "vdd_log";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <712500>;
-+				regulator-max-microvolt = <1450000>;
-+				regulator-ramp-delay = <12500>;
-+
-+				regulator-state-mem {
-+					regulator-on-in-suspend;
-+					regulator-suspend-microvolt = <1000000>;
-+				};
-+			};
-+
-+			vdd_arm: DCDC_REG2 {
-+				regulator-name = "vdd_arm";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <712500>;
-+				regulator-max-microvolt = <1450000>;
-+				regulator-ramp-delay = <12500>;
-+
-+				regulator-state-mem {
-+					regulator-on-in-suspend;
-+					regulator-suspend-microvolt = <950000>;
-+				};
-+			};
-+
-+			vcc_ddr: DCDC_REG3 {
-+				regulator-name = "vcc_ddr";
-+				regulator-always-on;
-+				regulator-boot-on;
-+
-+				regulator-state-mem {
-+					regulator-on-in-suspend;
-+				};
-+			};
-+
-+			vcc_io_33: DCDC_REG4 {
-+				regulator-name = "vcc_io_33";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <3300000>;
-+				regulator-max-microvolt = <3300000>;
-+
-+				regulator-state-mem {
-+					regulator-on-in-suspend;
-+					regulator-suspend-microvolt = <3300000>;
-+				};
-+			};
-+
-+			vcc_18: LDO_REG1 {
-+				regulator-name = "vcc_18";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <1800000>;
-+
-+				regulator-state-mem {
-+					regulator-on-in-suspend;
-+					regulator-suspend-microvolt = <1800000>;
-+				};
-+			};
-+
-+			vcc18_emmc: LDO_REG2 {
-+				regulator-name = "vcc18_emmc";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <1800000>;
-+
-+				regulator-state-mem {
-+					regulator-on-in-suspend;
-+					regulator-suspend-microvolt = <1800000>;
-+				};
-+			};
-+
-+			vdd_10: LDO_REG3 {
-+				regulator-name = "vdd_10";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <1000000>;
-+				regulator-max-microvolt = <1000000>;
-+
-+				regulator-state-mem {
-+					regulator-on-in-suspend;
-+					regulator-suspend-microvolt = <1000000>;
-+				};
-+			};
-+		};
-+	};
-+};
-+
-+&io_domains {
-+	pmuio-supply = <&vcc_io_33>;
-+	vccio1-supply = <&vcc_io_33>;
-+	vccio2-supply = <&vcc18_emmc>;
-+	vccio3-supply = <&vcc_io_sdio>;
-+	vccio4-supply = <&vcc_18>;
-+	vccio5-supply = <&vcc_io_33>;
-+	vccio6-supply = <&vcc_io_33>;
-+	status = "okay";
-+};
-+
-+&pinctrl {
-+	button {
-+		reset_button_pin: reset-button-pin {
-+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+	};
-+
-+	ethernet-phy {
-+		eth_phy_reset_pin: eth-phy-reset-pin {
-+			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
-+		};
-+	};
-+
-+	leds {
-+		lan_led_pin: lan-led-pin {
-+			rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+
-+		sys_led_pin: sys-led-pin {
-+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+
-+		wan_led_pin: wan-led-pin {
-+			rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+	};
-+
-+	pmic {
-+		pmic_int_l: pmic-int-l {
-+			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
-+		};
-+	};
-+
-+	sd {
-+		sdio_vcc_pin: sdio-vcc-pin {
-+			rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
-+		};
-+	};
-+};
-+
-+&pwm2 {
-+	status = "okay";
-+};
-+
-+&sdmmc {
-+	bus-width = <4>;
-+	cap-sd-highspeed;
-+	disable-wp;
-+	pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>;
-+	pinctrl-names = "default";
-+	sd-uhs-sdr12;
-+	sd-uhs-sdr25;
-+	sd-uhs-sdr50;
-+	sd-uhs-sdr104;
-+	vmmc-supply = <&vcc_sd>;
-+	vqmmc-supply = <&vcc_io_sdio>;
-+	status = "okay";
-+};
-+
-+&tsadc {
-+	rockchip,hw-tshut-mode = <0>;
-+	rockchip,hw-tshut-polarity = <0>;
-+	status = "okay";
-+};
-+
-+&u2phy {
-+	status = "okay";
-+};
-+
-+&u2phy_host {
-+	status = "okay";
-+};
-+
-+&u2phy_otg {
-+	status = "okay";
-+};
-+
-+&uart2 {
-+	status = "okay";
-+};
-+
-+&usb20_otg {
-+	status = "okay";
-+	dr_mode = "host";
-+};
-+
-+&usb_host0_ehci {
-+	status = "okay";
-+};
-+
-+&usb_host0_ohci {
-+	status = "okay";
-+};
---- a/board/rockchip/evb_rk3328/MAINTAINERS
-+++ b/board/rockchip/evb_rk3328/MAINTAINERS
-@@ -5,6 +5,13 @@ F:      board/rockchip/evb_rk3328
- F:      include/configs/evb_rk3328.h
- F:      configs/evb-rk3328_defconfig
- 
-+NANOPI-R2S-RK3328
-+M:      David Bauer <[email protected]>
-+S:      Maintained
-+F:      configs/nanopi-r2s-rk3328_defconfig
-+F:      arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi
-+F:      arch/arm/dts/rk3328-nanopi-r2s.dts
-+
- ROC-RK3328-CC
- M:      Loic Devulder <[email protected]>
- M:      Chen-Yu Tsai <[email protected]>
---- /dev/null
-+++ b/configs/nanopi-r2s-rk3328_defconfig
-@@ -0,0 +1,98 @@
-+CONFIG_ARM=y
-+CONFIG_ARCH_ROCKCHIP=y
-+CONFIG_SYS_TEXT_BASE=0x00200000
-+CONFIG_SPL_GPIO_SUPPORT=y
-+CONFIG_ENV_OFFSET=0x3F8000
-+CONFIG_ROCKCHIP_RK3328=y
-+CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y
-+CONFIG_TPL_LIBCOMMON_SUPPORT=y
-+CONFIG_TPL_LIBGENERIC_SUPPORT=y
-+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-+CONFIG_SPL_STACK_R_ADDR=0x600000
-+CONFIG_NR_DRAM_BANKS=1
-+CONFIG_DEBUG_UART_BASE=0xFF130000
-+CONFIG_DEBUG_UART_CLOCK=24000000
-+CONFIG_SYSINFO=y
-+CONFIG_DEBUG_UART=y
-+CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
-+# CONFIG_ANDROID_BOOT_IMAGE is not set
-+CONFIG_FIT=y
-+CONFIG_FIT_VERBOSE=y
-+CONFIG_SPL_LOAD_FIT=y
-+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-nanopi-r2s.dtb"
-+CONFIG_MISC_INIT_R=y
-+# CONFIG_DISPLAY_CPUINFO is not set
-+CONFIG_DISPLAY_BOARDINFO_LATE=y
-+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
-+CONFIG_TPL_SYS_MALLOC_SIMPLE=y
-+CONFIG_SPL_STACK_R=y
-+CONFIG_SPL_I2C_SUPPORT=y
-+CONFIG_SPL_POWER_SUPPORT=y
-+CONFIG_SPL_ATF=y
-+CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
-+CONFIG_CMD_BOOTZ=y
-+CONFIG_CMD_GPT=y
-+CONFIG_CMD_MMC=y
-+CONFIG_CMD_USB=y
-+# CONFIG_CMD_SETEXPR is not set
-+CONFIG_CMD_TIME=y
-+CONFIG_SPL_OF_CONTROL=y
-+CONFIG_TPL_OF_CONTROL=y
-+CONFIG_DEFAULT_DEVICE_TREE="rk3328-nanopi-r2s"
-+CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
-+CONFIG_TPL_OF_PLATDATA=y
-+CONFIG_ENV_IS_IN_MMC=y
-+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-+CONFIG_NET_RANDOM_ETHADDR=y
-+CONFIG_TPL_DM=y
-+CONFIG_REGMAP=y
-+CONFIG_SPL_REGMAP=y
-+CONFIG_TPL_REGMAP=y
-+CONFIG_SYSCON=y
-+CONFIG_SPL_SYSCON=y
-+CONFIG_TPL_SYSCON=y
-+CONFIG_CLK=y
-+CONFIG_SPL_CLK=y
-+CONFIG_FASTBOOT_BUF_ADDR=0x800800
-+CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
-+CONFIG_ROCKCHIP_GPIO=y
-+CONFIG_SYS_I2C_ROCKCHIP=y
-+CONFIG_MMC_DW=y
-+CONFIG_MMC_DW_ROCKCHIP=y
-+CONFIG_SF_DEFAULT_SPEED=20000000
-+CONFIG_DM_ETH=y
-+CONFIG_ETH_DESIGNWARE=y
-+CONFIG_GMAC_ROCKCHIP=y
-+CONFIG_PINCTRL=y
-+CONFIG_SPL_PINCTRL=y
-+CONFIG_DM_PMIC=y
-+CONFIG_PMIC_RK8XX=y
-+CONFIG_SPL_DM_REGULATOR=y
-+CONFIG_REGULATOR_PWM=y
-+CONFIG_DM_REGULATOR_FIXED=y
-+CONFIG_SPL_DM_REGULATOR_FIXED=y
-+CONFIG_REGULATOR_RK8XX=y
-+CONFIG_PWM_ROCKCHIP=y
-+CONFIG_RAM=y
-+CONFIG_SPL_RAM=y
-+CONFIG_TPL_RAM=y
-+CONFIG_DM_RESET=y
-+CONFIG_BAUDRATE=1500000
-+CONFIG_DEBUG_UART_SHIFT=2
-+CONFIG_SYSRESET=y
-+# CONFIG_TPL_SYSRESET is not set
-+CONFIG_USB=y
-+CONFIG_USB_XHCI_HCD=y
-+CONFIG_USB_XHCI_DWC3=y
-+CONFIG_USB_EHCI_HCD=y
-+CONFIG_USB_EHCI_GENERIC=y
-+CONFIG_USB_OHCI_HCD=y
-+CONFIG_USB_OHCI_GENERIC=y
-+CONFIG_USB_DWC2=y
-+CONFIG_USB_DWC3=y
-+# CONFIG_USB_DWC3_GADGET is not set
-+CONFIG_USB_GADGET=y
-+CONFIG_USB_GADGET_DWC2_OTG=y
-+CONFIG_SPL_TINY_MEMSET=y
-+CONFIG_TPL_TINY_MEMSET=y
-+CONFIG_ERRNO_STR=y

package/boot/uboot-rockchip/src/of-platdata/nanopi-r2s-rk3328/dt-platdata.c → package/boot/uboot-rockchip/src/of-platdata/nanopi-r2s-rk3328/dt-plat.c

@@ -1,11 +1,12 @@
 /*
  * DO NOT MODIFY
  *
- * This file was generated by dtoc from a .dtb (device tree binary) file.
+ * Declares the U_BOOT_DRIVER() records and platform data.
+ * This was generated by dtoc from a .dtb (device tree binary) file.
  */
 
-/* Allow use of U_BOOT_DEVICE() in this file */
-#define DT_PLATDATA_C
+/* Allow use of U_BOOT_DRVINFO() in this file */
+#define DT_PLAT_C
 
 #include <common.h>
 #include <dm.h>
@@ -16,10 +17,10 @@ static struct dtd_rockchip_rk3328_cru dtv_clock_controller_at_ff440000 = {
 	.reg			= {0xff440000, 0x1000},
 	.rockchip_grf		= 0x3a,
 };
-U_BOOT_DEVICE(clock_controller_at_ff440000) = {
+U_BOOT_DRVINFO(clock_controller_at_ff440000) = {
 	.name		= "rockchip_rk3328_cru",
-	.platdata	= &dtv_clock_controller_at_ff440000,
-	.platdata_size	= sizeof(dtv_clock_controller_at_ff440000),
+	.plat	= &dtv_clock_controller_at_ff440000,
+	.plat_size	= sizeof(dtv_clock_controller_at_ff440000),
 	.parent_idx	= -1,
 };
 
@@ -53,30 +54,14 @@ static struct dtd_rockchip_rk3328_dmc dtv_dmc = {
 		0x9, 0x77, 0x78, 0x77, 0x77, 0x77, 0x77, 0x77,
 		0x77, 0x77, 0x79, 0x9},
 };
-U_BOOT_DEVICE(dmc) = {
+U_BOOT_DRVINFO(dmc) = {
 	.name		= "rockchip_rk3328_dmc",
-	.platdata	= &dtv_dmc,
-	.platdata_size	= sizeof(dtv_dmc),
+	.plat	= &dtv_dmc,
+	.plat_size	= sizeof(dtv_dmc),
 	.parent_idx	= -1,
 };
 
-/* Node /pinctrl/gpio0@ff210000 index 2 */
-static struct dtd_rockchip_gpio_bank dtv_gpio0_at_ff210000 = {
-	.clocks			= {
-			{0, {200}},},
-	.gpio_controller	= true,
-	.interrupt_controller	= true,
-	.interrupts		= {0x0, 0x33, 0x4},
-	.reg			= {0xff210000, 0x100},
-};
-U_BOOT_DEVICE(gpio0_at_ff210000) = {
-	.name		= "rockchip_gpio_bank",
-	.platdata	= &dtv_gpio0_at_ff210000,
-	.platdata_size	= sizeof(dtv_gpio0_at_ff210000),
-	.parent_idx	= 4,
-};
-
-/* Node /mmc@ff500000 index 3 */
+/* Node /mmc@ff500000 index 2 */
 static struct dtd_rockchip_rk3288_dw_mshc dtv_mmc_at_ff500000 = {
 	.bus_width		= 0x4,
 	.cap_sd_highspeed	= true,
@@ -100,44 +85,14 @@ static struct dtd_rockchip_rk3288_dw_mshc dtv_mmc_at_ff500000 = {
 	.vmmc_supply		= 0x4b,
 	.vqmmc_supply		= 0x1e,
 };
-U_BOOT_DEVICE(mmc_at_ff500000) = {
+U_BOOT_DRVINFO(mmc_at_ff500000) = {
 	.name		= "rockchip_rk3288_dw_mshc",
-	.platdata	= &dtv_mmc_at_ff500000,
-	.platdata_size	= sizeof(dtv_mmc_at_ff500000),
-	.parent_idx	= -1,
-};
-
-/* Node /pinctrl index 4 */
-static struct dtd_rockchip_rk3328_pinctrl dtv_pinctrl = {
-	.ranges			= true,
-	.rockchip_grf		= 0x3a,
-};
-U_BOOT_DEVICE(pinctrl) = {
-	.name		= "rockchip_rk3328_pinctrl",
-	.platdata	= &dtv_pinctrl,
-	.platdata_size	= sizeof(dtv_pinctrl),
-	.parent_idx	= -1,
-};
-
-/* Node /sdmmc-regulator index 5 */
-static struct dtd_regulator_fixed dtv_sdmmc_regulator = {
-	.gpio			= {0x61, 0x1e, 0x1},
-	.pinctrl_0		= 0x67,
-	.pinctrl_names		= "default",
-	.regulator_boot_on	= true,
-	.regulator_max_microvolt = 0x325aa0,
-	.regulator_min_microvolt = 0x325aa0,
-	.regulator_name		= "vcc_sd",
-	.vin_supply		= 0x1c,
-};
-U_BOOT_DEVICE(sdmmc_regulator) = {
-	.name		= "regulator_fixed",
-	.platdata	= &dtv_sdmmc_regulator,
-	.platdata_size	= sizeof(dtv_sdmmc_regulator),
+	.plat	= &dtv_mmc_at_ff500000,
+	.plat_size	= sizeof(dtv_mmc_at_ff500000),
 	.parent_idx	= -1,
 };
 
-/* Node /serial@ff130000 index 6 */
+/* Node /serial@ff130000 index 3 */
 static struct dtd_ns16550_serial dtv_serial_at_ff130000 = {
 	.clock_frequency	= 0x16e3600,
 	.clocks			= {
@@ -152,23 +107,21 @@ static struct dtd_ns16550_serial dtv_serial_at_ff130000 = {
 	.reg_io_width		= 0x4,
 	.reg_shift		= 0x2,
 };
-U_BOOT_DEVICE(serial_at_ff130000) = {
+U_BOOT_DRVINFO(serial_at_ff130000) = {
 	.name		= "ns16550_serial",
-	.platdata	= &dtv_serial_at_ff130000,
-	.platdata_size	= sizeof(dtv_serial_at_ff130000),
+	.plat	= &dtv_serial_at_ff130000,
+	.plat_size	= sizeof(dtv_serial_at_ff130000),
 	.parent_idx	= -1,
 };
 
-/* Node /syscon@ff100000 index 7 */
+/* Node /syscon@ff100000 index 4 */
 static struct dtd_rockchip_rk3328_grf dtv_syscon_at_ff100000 = {
 	.reg			= {0xff100000, 0x1000},
 };
-U_BOOT_DEVICE(syscon_at_ff100000) = {
+U_BOOT_DRVINFO(syscon_at_ff100000) = {
 	.name		= "rockchip_rk3328_grf",
-	.platdata	= &dtv_syscon_at_ff100000,
-	.platdata_size	= sizeof(dtv_syscon_at_ff100000),
+	.plat	= &dtv_syscon_at_ff100000,
+	.plat_size	= sizeof(dtv_syscon_at_ff100000),
 	.parent_idx	= -1,
 };
 
-void dm_populate_phandle_data(void) {
-}

package/boot/uboot-rockchip/src/of-platdata/nanopi-r2s-rk3328/dt-structs-gen.h

@@ -1,7 +1,8 @@
 /*
  * DO NOT MODIFY
  *
- * This file was generated by dtoc from a .dtb (device tree binary) file.
+ * Defines the structs used to hold devicetree data.
+ * This was generated by dtoc from a .dtb (device tree binary) file.
  */
 
 #include <stdbool.h>
@@ -18,23 +19,6 @@ struct dtd_ns16550_serial {
 	fdt32_t		reg_io_width;
 	fdt32_t		reg_shift;
 };
-struct dtd_regulator_fixed {
-	fdt32_t		gpio[3];
-	fdt32_t		pinctrl_0;
-	const char *	pinctrl_names;
-	bool		regulator_boot_on;
-	fdt32_t		regulator_max_microvolt;
-	fdt32_t		regulator_min_microvolt;
-	const char *	regulator_name;
-	fdt32_t		vin_supply;
-};
-struct dtd_rockchip_gpio_bank {
-	struct phandle_1_arg clocks[1];
-	bool		gpio_controller;
-	bool		interrupt_controller;
-	fdt32_t		interrupts[3];
-	fdt64_t		reg[2];
-};
 struct dtd_rockchip_rk3288_dw_mshc {
 	fdt32_t		bus_width;
 	bool		cap_sd_highspeed;
@@ -65,7 +49,3 @@ struct dtd_rockchip_rk3328_dmc {
 struct dtd_rockchip_rk3328_grf {
 	fdt64_t		reg[2];
 };
-struct dtd_rockchip_rk3328_pinctrl {
-	bool		ranges;
-	fdt32_t		rockchip_grf;
-};