kernel: refresh patches for kernel 4.4

Signed-off-by: Hauke Mehrtens <[email protected]>

SVN-Revision: 48222

target/linux/bcm53xx/patches-4.4/020-ARM-BCM5301X-remove-workaround-imprecise-abort-fault.patch

@@ -59,7 +59,7 @@ Signed-off-by: Florian Fainelli <[email protected]>
  
  static const char *const bcm5301x_dt_compat[] __initconst = {
  	"brcm,bcm4708",
-@@ -52,6 +18,5 @@ static const char *const bcm5301x_dt_compat[] __initconst = {
+@@ -52,6 +18,5 @@ static const char *const bcm5301x_dt_com
  DT_MACHINE_START(BCM5301X, "BCM5301X")
  	.l2c_aux_val	= 0,
  	.l2c_aux_mask	= ~0,

target/linux/bcm53xx/patches-4.4/022-ARM-BCM-Clean-up-SMP-support-for-Broadcom-Kona.patch

@@ -217,7 +217,7 @@ Signed-off-by: Florian Fainelli <[email protected]>
  {
  	void __iomem *boot_reg;
  	phys_addr_t boot_func;
-@@ -154,15 +179,16 @@ static int bcm_boot_secondary(unsigned int cpu, struct task_struct *idle)
+@@ -154,15 +179,16 @@ static int bcm_boot_secondary(unsigned i
  		return -EINVAL;
  	}
  
@@ -237,7 +237,7 @@ Signed-off-by: Florian Fainelli <[email protected]>
  	}
  
  	/*
-@@ -191,12 +217,12 @@ static int bcm_boot_secondary(unsigned int cpu, struct task_struct *idle)
+@@ -191,12 +217,12 @@ static int bcm_boot_secondary(unsigned i
  
  	pr_err("timeout waiting for cpu %u to start\n", cpu_id);
  

target/linux/bcm53xx/patches-4.4/023-ARM-BCM-Add-SMP-support-for-Broadcom-NSP.patch

@@ -50,7 +50,7 @@ Signed-off-by: Florian Fainelli <[email protected]>
  
  # BCM281XX
  obj-$(CONFIG_ARCH_BCM_281XX)	+= board_bcm281xx.o
-@@ -23,7 +27,7 @@ obj-$(CONFIG_ARCH_BCM_281XX)	+= board_bcm281xx.o
+@@ -23,7 +27,7 @@ obj-$(CONFIG_ARCH_BCM_281XX)	+= board_bc
  obj-$(CONFIG_ARCH_BCM_21664)	+= board_bcm21664.o
  
  # BCM281XX and BCM21664 SMP support

target/linux/bcm53xx/patches-4.4/024-ARM-BCM-Add-SMP-support-for-Broadcom-4708.patch

@@ -46,7 +46,7 @@ Signed-off-by: Florian Fainelli <[email protected]>
  	  Support for Broadcom BCM470X and BCM5301X SoCs with ARM CPU cores.
 --- a/arch/arm/mach-bcm/Makefile
 +++ b/arch/arm/mach-bcm/Makefile
-@@ -43,6 +43,9 @@ obj-$(CONFIG_ARCH_BCM2835)	+= board_bcm2835.o
+@@ -43,6 +43,9 @@ obj-$(CONFIG_ARCH_BCM2835)	+= board_bcm2
  
  # BCM5301X
  obj-$(CONFIG_ARCH_BCM_5301X)	+= bcm_5301x.o

target/linux/bcm53xx/patches-4.4/031-ARM-dts-enable-clock-support-for-BCM5301X.patch

@@ -121,7 +121,8 @@ Signed-off-by: Florian Fainelli <[email protected]>
 +		};
 +
 +		iprocmed: iprocmed {
-+			#clock-cells = <0>;
+ 			#clock-cells = <0>;
+-			clock-frequency = <400000000>;
 +			compatible = "fixed-factor-clock";
 +			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
 +			clock-div = <2>;
@@ -137,8 +138,7 @@ Signed-off-by: Florian Fainelli <[email protected]>
 +		};
 +
 +		periph_clk: periph_clk {
- 			#clock-cells = <0>;
--			clock-frequency = <400000000>;
++			#clock-cells = <0>;
 +			compatible = "fixed-factor-clock";
 +			clocks = <&a9pll>;
 +			clock-div = <2>;

target/linux/bcm53xx/patches-4.4/033-dt-bindings-add-SMP-enable-method-for-Broadcom-NSP.patch

@@ -60,7 +60,7 @@ Signed-off-by: Florian Fainelli <[email protected]>
 +	};
 --- a/Documentation/devicetree/bindings/arm/cpus.txt
 +++ b/Documentation/devicetree/bindings/arm/cpus.txt
-@@ -190,6 +190,7 @@ nodes to be present and contain the properties described below.
+@@ -190,6 +190,7 @@ nodes to be present and contain the prop
  			    "allwinner,sun6i-a31"
  			    "allwinner,sun8i-a23"
  			    "arm,psci"

target/linux/bcm53xx/patches-4.4/080-USB-bcma-switch-to-GPIO-descriptor-for-power-control.patch

@@ -37,7 +37,7 @@ Signed-off-by: Greg Kroah-Hartman <[email protected]>
  };
  
  /* Wait for bitmask in a register to get set or cleared.
-@@ -228,19 +230,12 @@ static void bcma_hcd_init_chip_arm(struct bcma_device *dev)
+@@ -228,19 +230,12 @@ static void bcma_hcd_init_chip_arm(struc
  
  static void bcma_hci_platform_power_gpio(struct bcma_device *dev, bool val)
  {
@@ -60,7 +60,7 @@ Signed-off-by: Greg Kroah-Hartman <[email protected]>
  }
  
  static const struct usb_ehci_pdata ehci_pdata = {
-@@ -314,7 +309,11 @@ static int bcma_hcd_probe(struct bcma_device *dev)
+@@ -314,7 +309,11 @@ static int bcma_hcd_probe(struct bcma_de
  	if (!usb_dev)
  		return -ENOMEM;
  

target/linux/bcm53xx/patches-4.4/153-PCI-iproc-Add-iProc-PCIe-MSI-support.patch

@@ -52,7 +52,7 @@ Reviewed-by: Scott Branden <[email protected]>
 
 --- a/drivers/pci/host/Kconfig
 +++ b/drivers/pci/host/Kconfig
-@@ -126,6 +126,15 @@ config PCIE_IPROC
+@@ -127,6 +127,15 @@ config PCIE_IPROC
  	  iProc family of SoCs. An appropriate bus interface driver also needs
  	  to be enabled
  

target/linux/bcm53xx/patches-4.4/810-USB-bcma-use-simpler-devm_gpiod_get.patch

@@ -12,7 +12,7 @@ Signed-off-by: Rafał Miłecki <[email protected]>
 
 --- a/drivers/usb/host/bcma-hcd.c
 +++ b/drivers/usb/host/bcma-hcd.c
-@@ -568,8 +568,7 @@ static int bcma_hcd_probe(struct bcma_device *dev)
+@@ -568,8 +568,7 @@ static int bcma_hcd_probe(struct bcma_de
  	usb_dev->core = dev;
  
  	if (dev->dev.of_node)

target/linux/brcm47xx/patches-4.4/400-mtd-bcm47xxpart-get-nvram.patch

@@ -1,6 +1,6 @@
 --- a/drivers/mtd/bcm47xxpart.c
 +++ b/drivers/mtd/bcm47xxpart.c
-@@ -100,6 +100,7 @@ static int bcm47xxpart_parse(struct mtd_
+@@ -127,6 +127,7 @@ static int bcm47xxpart_parse(struct mtd_
  	int last_trx_part = -1;
  	int possible_nvram_sizes[] = { 0x8000, 0xF000, 0x10000, };
  	int err;
@@ -8,7 +8,7 @@
  
  	/*
  	 * Some really old flashes (like AT45DB*) had smaller erasesize-s, but
-@@ -306,12 +307,23 @@ static int bcm47xxpart_parse(struct mtd_
+@@ -334,12 +335,23 @@ static int bcm47xxpart_parse(struct mtd_
  		if (buf[0] == NVRAM_HEADER) {
  			bcm47xxpart_add_part(&parts[curr_part++], "nvram",
  					     master->size - blocksize, 0);

target/linux/generic/patches-4.4/431-mtd-bcm47xxpart-check-for-bad-blocks-when-calculatin.patch

@@ -13,7 +13,7 @@ Signed-off-by: Rafał Miłecki <[email protected]>
 
 --- a/drivers/mtd/bcm47xxpart.c
 +++ b/drivers/mtd/bcm47xxpart.c
-@@ -61,6 +61,34 @@ static void bcm47xxpart_add_part(struct mtd_partition *part, const char *name,
+@@ -61,6 +61,34 @@ static void bcm47xxpart_add_part(struct
  	part->mask_flags = mask_flags;
  }
  
@@ -48,7 +48,7 @@ Signed-off-by: Rafał Miłecki <[email protected]>
  static const char *bcm47xxpart_trx_data_part_name(struct mtd_info *master,
  						  size_t offset)
  {
-@@ -182,6 +210,8 @@ static int bcm47xxpart_parse(struct mtd_info *master,
+@@ -182,6 +210,8 @@ static int bcm47xxpart_parse(struct mtd_
  
  		/* TRX */
  		if (buf[0x000 / 4] == TRX_MAGIC) {
@@ -57,7 +57,7 @@ Signed-off-by: Rafał Miłecki <[email protected]>
  			if (BCM47XXPART_MAX_PARTS - curr_part < 4) {
  				pr_warn("Not enough partitions left to register trx, scanning stopped!\n");
  				break;
-@@ -196,18 +226,18 @@ static int bcm47xxpart_parse(struct mtd_info *master,
+@@ -196,18 +226,18 @@ static int bcm47xxpart_parse(struct mtd_
  			i = 0;
  			/* We have LZMA loader if offset[2] points to sth */
  			if (trx->offset[2]) {
@@ -82,7 +82,7 @@ Signed-off-by: Rafał Miłecki <[email protected]>
  				i++;
  			}
  
-@@ -219,11 +249,11 @@ static int bcm47xxpart_parse(struct mtd_info *master,
+@@ -219,11 +249,11 @@ static int bcm47xxpart_parse(struct mtd_
  			if (trx->offset[i]) {
  				const char *name;
  

target/linux/generic/patches-4.4/735-net-phy-at803x-fix-at8033-sgmii-mode.patch

@@ -61,7 +61,7 @@
  	.probe			= at803x_probe,
  	.config_init		= at803x_config_init,
  	.link_change_notify	= at803x_link_change_notify,
-@@ -413,7 +438,7 @@ static struct phy_driver at803x_driver[]
+@@ -415,7 +440,7 @@ static struct phy_driver at803x_driver[]
  	/* ATHEROS 8030 */
  	.phy_id			= ATH8030_PHY_ID,
  	.name			= "Atheros 8030 ethernet",
@@ -70,7 +70,7 @@
  	.probe			= at803x_probe,
  	.config_init		= at803x_config_init,
  	.link_change_notify	= at803x_link_change_notify,
-@@ -431,8 +456,8 @@ static struct phy_driver at803x_driver[]
+@@ -435,8 +460,8 @@ static struct phy_driver at803x_driver[]
  }, {
  	/* ATHEROS 8031 */
  	.phy_id			= ATH8031_PHY_ID,
@@ -81,7 +81,7 @@
  	.probe			= at803x_probe,
  	.config_init		= at803x_config_init,
  	.link_change_notify	= at803x_link_change_notify,
-@@ -454,9 +479,9 @@ static struct phy_driver at803x_driver[]
+@@ -458,9 +483,9 @@ static struct phy_driver at803x_driver[]
  module_phy_driver(at803x_driver);
  
  static struct mdio_device_id __maybe_unused atheros_tbl[] = {

target/linux/mvebu/patches-4.4/100-find_active_root.patch

@@ -22,7 +22,7 @@ Signed-off-by: Imre Kaloz <[email protected]>
  	struct device_node *pp;
  	int nr_parts, i, ret = 0;
  	bool dedicated = true;
-@@ -102,9 +105,15 @@ static int parse_ofpart_partitions(struc
+@@ -110,9 +113,15 @@ static int parse_ofpart_partitions(struc
  		(*pparts)[i].offset = of_read_number(reg, a_cells);
  		(*pparts)[i].size = of_read_number(reg + a_cells, s_cells);
  
@@ -41,7 +41,7 @@ Signed-off-by: Imre Kaloz <[email protected]>
  		(*pparts)[i].name = partname;
  
  		if (of_get_property(pp, "read-only", &len))
-@@ -207,6 +216,18 @@ static int __init ofpart_parser_init(voi
+@@ -215,6 +224,18 @@ static int __init ofpart_parser_init(voi
  	return 0;
  }
  

target/linux/omap/patches/001-omap4_pandaboard-wlan_fix.patch

@@ -1,6 +1,6 @@
 --- a/arch/arm/mach-omap2/twl-common.c
 +++ b/arch/arm/mach-omap2/twl-common.c
-@@ -280,6 +280,7 @@ static struct regulator_init_data omap4_
+@@ -368,6 +368,7 @@ static struct regulator_init_data omap4_
  static struct regulator_init_data omap4_clk32kg_idata = {
  	.constraints = {
  		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,

target/linux/sunxi/patches-4.4/100-clk-sunxi-add-dram-gates-support.patch

@@ -19,13 +19,9 @@ Signed-off-by: Maxime Ripard <[email protected]>
  drivers/clk/sunxi/clk-simple-gates.c              | 12 ++++++++++++
  2 files changed, 13 insertions(+)
 
-diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
-index 153ac72..ef0b452 100644
-diff --git a/drivers/clk/sunxi/clk-simple-gates.c b/drivers/clk/sunxi/clk-simple-gates.c
-index c8acc06..f4da52b 100644
 --- a/drivers/clk/sunxi/clk-simple-gates.c
 +++ b/drivers/clk/sunxi/clk-simple-gates.c
-@@ -160,3 +160,15 @@ CLK_OF_DECLARE(sun5i_a13_ahb, "allwinner,sun5i-a13-ahb-gates-clk",
+@@ -158,3 +158,15 @@ CLK_OF_DECLARE(sun5i_a13_ahb, "allwinner
  	       sun4i_a10_ahb_init);
  CLK_OF_DECLARE(sun7i_a20_ahb, "allwinner,sun7i-a20-ahb-gates-clk",
  	       sun4i_a10_ahb_init);

target/linux/sunxi/patches-4.4/101-dt-sun4i-add-dram-gates.patch

@@ -13,8 +13,6 @@ Signed-off-by: Maxime Ripard <[email protected]>
  arch/arm/boot/dts/sun4i-a10.dtsi | 36 ++++++++++++++++++++++++++++++++----
  1 file changed, 32 insertions(+), 4 deletions(-)
 
-diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
-index aa90f31..849d024 100644
 --- a/arch/arm/boot/dts/sun4i-a10.dtsi
 +++ b/arch/arm/boot/dts/sun4i-a10.dtsi
 @@ -66,7 +66,7 @@

target/linux/sunxi/patches-4.4/102-dt-sun7i-add-dram-gates.patch

@@ -13,8 +13,6 @@ Signed-off-by: Maxime Ripard <[email protected]>
  arch/arm/boot/dts/sun7i-a20.dtsi | 32 +++++++++++++++++++++++++++++---
  1 file changed, 29 insertions(+), 3 deletions(-)
 
-diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
-index e02eb72..21169c0 100644
 --- a/arch/arm/boot/dts/sun7i-a20.dtsi
 +++ b/arch/arm/boot/dts/sun7i-a20.dtsi
 @@ -68,7 +68,7 @@

target/linux/sunxi/patches-4.4/103-clk-sunxi-add-h3-clksupport.patch

@@ -24,10 +24,6 @@ Signed-off-by: Maxime Ripard <[email protected]>
  4 files changed, 121 insertions(+)
  create mode 100644 drivers/clk/sunxi/clk-sun8i-bus-gates.c
 
-diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
-index ef0b452..014eab8 100644
-diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile
-index 103efab..abf4916 100644
 --- a/drivers/clk/sunxi/Makefile
 +++ b/drivers/clk/sunxi/Makefile
 @@ -10,6 +10,7 @@ obj-y += clk-a10-pll2.o
@@ -38,9 +34,6 @@ index 103efab..abf4916 100644
  obj-y += clk-sun8i-mbus.o
  obj-y += clk-sun9i-core.o
  obj-y += clk-sun9i-mmc.o
-diff --git a/drivers/clk/sunxi/clk-sun8i-bus-gates.c b/drivers/clk/sunxi/clk-sun8i-bus-gates.c
-new file mode 100644
-index 0000000..7ab60c5
 --- /dev/null
 +++ b/drivers/clk/sunxi/clk-sun8i-bus-gates.c
 @@ -0,0 +1,112 @@
@@ -156,11 +149,9 @@ index 0000000..7ab60c5
 +
 +CLK_OF_DECLARE(sun8i_h3_bus_gates, "allwinner,sun8i-h3-bus-gates-clk",
 +	       sun8i_h3_bus_gates_init);
-diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
-index 9c79af0c..5ba2188 100644
 --- a/drivers/clk/sunxi/clk-sunxi.c
 +++ b/drivers/clk/sunxi/clk-sunxi.c
-@@ -778,6 +778,10 @@ static const struct mux_data sun6i_a31_ahb1_mux_data __initconst = {
+@@ -778,6 +778,10 @@ static const struct mux_data sun6i_a31_a
  	.shift = 12,
  };
  
@@ -171,7 +162,7 @@ index 9c79af0c..5ba2188 100644
  static void __init sunxi_mux_clk_setup(struct device_node *node,
  				       struct mux_data *data)
  {
-@@ -1130,6 +1134,7 @@ static const struct of_device_id clk_divs_match[] __initconst = {
+@@ -1130,6 +1134,7 @@ static const struct of_device_id clk_div
  static const struct of_device_id clk_mux_match[] __initconst = {
  	{.compatible = "allwinner,sun4i-a10-cpu-clk", .data = &sun4i_cpu_mux_data,},
  	{.compatible = "allwinner,sun6i-a31-ahb1-mux-clk", .data = &sun6i_a31_ahb1_mux_data,},
@@ -179,7 +170,7 @@ index 9c79af0c..5ba2188 100644
  	{}
  };
  
-@@ -1212,6 +1217,7 @@ CLK_OF_DECLARE(sun6i_a31_clk_init, "allwinner,sun6i-a31", sun6i_init_clocks);
+@@ -1212,6 +1217,7 @@ CLK_OF_DECLARE(sun6i_a31_clk_init, "allw
  CLK_OF_DECLARE(sun6i_a31s_clk_init, "allwinner,sun6i-a31s", sun6i_init_clocks);
  CLK_OF_DECLARE(sun8i_a23_clk_init, "allwinner,sun8i-a23", sun6i_init_clocks);
  CLK_OF_DECLARE(sun8i_a33_clk_init, "allwinner,sun8i-a33", sun6i_init_clocks);

target/linux/sunxi/patches-4.4/104-1-dt-sunxi-add-h3-dtsi.patch

@@ -13,9 +13,6 @@ Signed-off-by: Maxime Ripard <[email protected]>
  1 file changed, 497 insertions(+)
  create mode 100644 arch/arm/boot/dts/sun8i-h3.dtsi
 
-diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
-new file mode 100644
-index 0000000..1524130e
 --- /dev/null
 +++ b/arch/arm/boot/dts/sun8i-h3.dtsi
 @@ -0,0 +1,497 @@

target/linux/sunxi/patches-4.4/104-2-dt-sun8i-add-orangepi-plus.patch

@@ -17,11 +17,9 @@ Signed-off-by: Maxime Ripard <[email protected]>
  2 files changed, 79 insertions(+), 1 deletion(-)
  create mode 100644 arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
 
-diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
-index e8f44c7..cc7309b 100644
 --- a/arch/arm/boot/dts/Makefile
 +++ b/arch/arm/boot/dts/Makefile
-@@ -661,7 +661,8 @@ dtb-$(CONFIG_MACH_SUN8I) += \
+@@ -660,7 +660,8 @@ dtb-$(CONFIG_MACH_SUN8I) += \
  	sun8i-a33-ga10h-v1.1.dtb \
  	sun8i-a33-ippo-q8h-v1.2.dtb \
  	sun8i-a33-q8-tablet.dtb \
@@ -31,9 +29,6 @@ index e8f44c7..cc7309b 100644
  dtb-$(CONFIG_MACH_SUN9I) += \
  	sun9i-a80-optimus.dtb \
  	sun9i-a80-cubieboard4.dtb
-diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
-new file mode 100644
-index 0000000..e67df59
 --- /dev/null
 +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
 @@ -0,0 +1,77 @@

target/linux/sunxi/patches-4.4/105-phy-use_of_match_node.patch

@@ -13,8 +13,6 @@ Signed-off-by: Kishon Vijay Abraham I <[email protected]>
  drivers/phy/phy-sun4i-usb.c | 121 +++++++++++++++++++++++++++++---------------
  1 file changed, 79 insertions(+), 42 deletions(-)
 
-diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
-index b12964b..35b1fa3 100644
 --- a/drivers/phy/phy-sun4i-usb.c
 +++ b/drivers/phy/phy-sun4i-usb.c
 @@ -32,6 +32,7 @@
@@ -52,7 +50,7 @@ index b12964b..35b1fa3 100644
  	struct sun4i_usb_phy {
  		struct phy *phy;
  		void __iomem *pmu;
-@@ -159,17 +171,14 @@ static void sun4i_usb_phy_write(struct sun4i_usb_phy *phy, u32 addr, u32 data,
+@@ -159,17 +171,14 @@ static void sun4i_usb_phy_write(struct s
  {
  	struct sun4i_usb_phy_data *phy_data = to_sun4i_usb_phy_data(phy);
  	u32 temp, usbc_bit = BIT(phy->index * 2);
@@ -72,7 +70,7 @@ index b12964b..35b1fa3 100644
  	}
  
  	for (i = 0; i < len; i++) {
-@@ -249,7 +258,8 @@ static int sun4i_usb_phy_init(struct phy *_phy)
+@@ -249,7 +258,8 @@ static int sun4i_usb_phy_init(struct phy
  	sun4i_usb_phy_write(phy, PHY_TX_AMPLITUDE_TUNE, 0x14, 5);
  
  	/* Disconnect threshold adjustment */
@@ -82,7 +80,7 @@ index b12964b..35b1fa3 100644
  
  	sun4i_usb_phy_passby(phy, 1);
  
-@@ -476,7 +486,7 @@ static struct phy *sun4i_usb_phy_xlate(struct device *dev,
+@@ -476,7 +486,7 @@ static struct phy *sun4i_usb_phy_xlate(s
  {
  	struct sun4i_usb_phy_data *data = dev_get_drvdata(dev);
  
@@ -91,7 +89,7 @@ index b12964b..35b1fa3 100644
  		return ERR_PTR(-ENODEV);
  
  	return data->phys[args->args[0]].phy;
-@@ -511,7 +521,6 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
+@@ -511,7 +521,6 @@ static int sun4i_usb_phy_probe(struct pl
  	struct device *dev = &pdev->dev;
  	struct device_node *np = dev->of_node;
  	struct phy_provider *phy_provider;
@@ -99,7 +97,7 @@ index b12964b..35b1fa3 100644
  	struct resource *res;
  	int i, ret;
  
-@@ -522,29 +531,9 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
+@@ -522,29 +531,9 @@ static int sun4i_usb_phy_probe(struct pl
  	mutex_init(&data->mutex);
  	INIT_DELAYED_WORK(&data->detect, sun4i_usb_phy0_id_vbus_det_scan);
  	dev_set_drvdata(dev, data);
@@ -132,7 +130,7 @@ index b12964b..35b1fa3 100644
  
  	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy_ctrl");
  	data->base = devm_ioremap_resource(dev, res);
-@@ -590,7 +579,7 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
+@@ -590,7 +579,7 @@ static int sun4i_usb_phy_probe(struct pl
  		}
  	}
  
@@ -141,7 +139,7 @@ index b12964b..35b1fa3 100644
  		struct sun4i_usb_phy *phy = data->phys + i;
  		char name[16];
  
-@@ -602,7 +591,7 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
+@@ -602,7 +591,7 @@ static int sun4i_usb_phy_probe(struct pl
  			phy->vbus = NULL;
  		}
  
@@ -150,7 +148,7 @@ index b12964b..35b1fa3 100644
  			snprintf(name, sizeof(name), "usb%d_phy", i);
  		else
  			strlcpy(name, "usb_phy", sizeof(name));
-@@ -689,13 +678,61 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
+@@ -689,13 +678,61 @@ static int sun4i_usb_phy_probe(struct pl
  	return 0;
  }
  

target/linux/sunxi/patches-4.4/106-phy-add-h3-usbphys.patch

@@ -16,8 +16,6 @@ Signed-off-by: Kishon Vijay Abraham I <[email protected]>
  drivers/phy/phy-sun4i-usb.c                        | 41 +++++++++++++++++-----
  2 files changed, 33 insertions(+), 9 deletions(-)
 
-diff --git a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
-index 0cebf74..95736d7 100644
 --- a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
 +++ b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
 @@ -9,6 +9,7 @@ Required properties:
@@ -28,8 +26,6 @@ index 0cebf74..95736d7 100644
  - reg : a list of offset + length pairs
  - reg-names :
    * "phy_ctrl"
-diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
-index 35b1fa3..bae54f7 100644
 --- a/drivers/phy/phy-sun4i-usb.c
 +++ b/drivers/phy/phy-sun4i-usb.c
 @@ -47,6 +47,9 @@
@@ -59,7 +55,7 @@ index 35b1fa3..bae54f7 100644
  };
  
  struct sun4i_usb_phy_cfg {
-@@ -239,6 +243,7 @@ static int sun4i_usb_phy_init(struct phy *_phy)
+@@ -239,6 +243,7 @@ static int sun4i_usb_phy_init(struct phy
  	struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
  	struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
  	int ret;
@@ -67,13 +63,20 @@ index 35b1fa3..bae54f7 100644
  
  	ret = clk_prepare_enable(phy->clk);
  	if (ret)
-@@ -250,16 +255,26 @@ static int sun4i_usb_phy_init(struct phy *_phy)
+@@ -250,16 +255,26 @@ static int sun4i_usb_phy_init(struct phy
  		return ret;
  	}
  
 -	/* Enable USB 45 Ohm resistor calibration */
 -	if (phy->index == 0)
 -		sun4i_usb_phy_write(phy, PHY_RES45_CAL_EN, 0x01, 1);
+-
+-	/* Adjust PHY's magnitude and rate */
+-	sun4i_usb_phy_write(phy, PHY_TX_AMPLITUDE_TUNE, 0x14, 5);
+-
+-	/* Disconnect threshold adjustment */
+-	sun4i_usb_phy_write(phy, PHY_DISCON_TH_SEL,
+-			    data->cfg->disc_thresh, 2);
 +	if (data->cfg->type == sun8i_h3_phy) {
 +		if (phy->index == 0) {
 +			val = readl(data->base + REG_PHY_UNK_H3);
@@ -86,15 +89,10 @@ index 35b1fa3..bae54f7 100644
 +		/* Enable USB 45 Ohm resistor calibration */
 +		if (phy->index == 0)
 +			sun4i_usb_phy_write(phy, PHY_RES45_CAL_EN, 0x01, 1);
- 
--	/* Adjust PHY's magnitude and rate */
--	sun4i_usb_phy_write(phy, PHY_TX_AMPLITUDE_TUNE, 0x14, 5);
++
 +		/* Adjust PHY's magnitude and rate */
 +		sun4i_usb_phy_write(phy, PHY_TX_AMPLITUDE_TUNE, 0x14, 5);
- 
--	/* Disconnect threshold adjustment */
--	sun4i_usb_phy_write(phy, PHY_DISCON_TH_SEL,
--			    data->cfg->disc_thresh, 2);
++
 +		/* Disconnect threshold adjustment */
 +		sun4i_usb_phy_write(phy, PHY_DISCON_TH_SEL,
 +				    data->cfg->disc_thresh, 2);
@@ -102,7 +100,7 @@ index 35b1fa3..bae54f7 100644
  
  	sun4i_usb_phy_passby(phy, 1);
  
-@@ -726,6 +741,13 @@ static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = {
+@@ -726,6 +741,13 @@ static const struct sun4i_usb_phy_cfg su
  	.dedicated_clocks = true,
  };
  
@@ -116,7 +114,7 @@ index 35b1fa3..bae54f7 100644
  static const struct of_device_id sun4i_usb_phy_of_match[] = {
  	{ .compatible = "allwinner,sun4i-a10-usb-phy", .data = &sun4i_a10_cfg },
  	{ .compatible = "allwinner,sun5i-a13-usb-phy", .data = &sun5i_a13_cfg },
-@@ -733,6 +755,7 @@ static const struct of_device_id sun4i_usb_phy_of_match[] = {
+@@ -733,6 +755,7 @@ static const struct of_device_id sun4i_u
  	{ .compatible = "allwinner,sun7i-a20-usb-phy", .data = &sun7i_a20_cfg },
  	{ .compatible = "allwinner,sun8i-a23-usb-phy", .data = &sun8i_a23_cfg },
  	{ .compatible = "allwinner,sun8i-a33-usb-phy", .data = &sun8i_a33_cfg },

target/linux/sunxi/patches-4.4/107-clk-sunxi-add-h3-usbphy-clocks.patch

@@ -17,8 +17,6 @@ Signed-off-by: Maxime Ripard <[email protected]>
  drivers/clk/sunxi/clk-usb.c                       | 12 ++++++++++++
  2 files changed, 13 insertions(+)
 
-diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
-index 8a47b77..a94bb56 100644
 --- a/Documentation/devicetree/bindings/clock/sunxi.txt
 +++ b/Documentation/devicetree/bindings/clock/sunxi.txt
 @@ -68,6 +68,7 @@ Required properties:
@@ -29,11 +27,9 @@ index 8a47b77..a94bb56 100644
  	"allwinner,sun9i-a80-usb-mod-clk" - for usb gates + resets on A80
  	"allwinner,sun9i-a80-usb-phy-clk" - for usb phy gates + resets on A80
  
-diff --git a/drivers/clk/sunxi/clk-usb.c b/drivers/clk/sunxi/clk-usb.c
-index 1a72cd6..67b8e38 100644
 --- a/drivers/clk/sunxi/clk-usb.c
 +++ b/drivers/clk/sunxi/clk-usb.c
-@@ -243,3 +243,15 @@ static void __init sun9i_a80_usb_phy_setup(struct device_node *node)
+@@ -243,3 +243,15 @@ static void __init sun9i_a80_usb_phy_set
  	sunxi_usb_clk_setup(node, &sun9i_a80_usb_phy_data, &a80_usb_phy_lock);
  }
  CLK_OF_DECLARE(sun9i_a80_usb_phy, "allwinner,sun9i-a80-usb-phy-clk", sun9i_a80_usb_phy_setup);

target/linux/sunxi/patches-4.4/110-clk-sunxi-add-ve-for-sun457i.patch

@@ -20,11 +20,9 @@ Signed-off-by: Maxime Ripard <[email protected]>
  3 files changed, 176 insertions(+)
  create mode 100644 drivers/clk/sunxi/clk-a10-ve.c
 
-diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
-index 014eab8..e59f57b 100644
 --- a/Documentation/devicetree/bindings/clock/sunxi.txt
 +++ b/Documentation/devicetree/bindings/clock/sunxi.txt
-@@ -76,6 +76,7 @@ Required properties:
+@@ -71,6 +71,7 @@ Required properties:
  	"allwinner,sun8i-h3-usb-clk" - for usb gates + resets on H3
  	"allwinner,sun9i-a80-usb-mod-clk" - for usb gates + resets on A80
  	"allwinner,sun9i-a80-usb-phy-clk" - for usb phy gates + resets on A80
@@ -32,7 +30,7 @@ index 014eab8..e59f57b 100644
  
  Required properties for all clocks:
  - reg : shall be the control register address for the clock.
-@@ -95,6 +96,9 @@ Required properties for all clocks:
+@@ -90,6 +91,9 @@ Required properties for all clocks:
  And "allwinner,*-usb-clk" clocks also require:
  - reset-cells : shall be set to 1
  
@@ -42,8 +40,6 @@ index 014eab8..e59f57b 100644
  The "allwinner,sun9i-a80-mmc-config-clk" clock also requires:
  - #reset-cells : shall be set to 1
  - resets : shall be the reset control phandle for the mmc block.
-diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile
-index abf4916..1a909f9 100644
 --- a/drivers/clk/sunxi/Makefile
 +++ b/drivers/clk/sunxi/Makefile
 @@ -7,6 +7,7 @@ obj-y += clk-a10-codec.o
@@ -54,9 +50,6 @@ index abf4916..1a909f9 100644
  obj-y += clk-a20-gmac.o
  obj-y += clk-mod0.o
  obj-y += clk-simple-gates.o
-diff --git a/drivers/clk/sunxi/clk-a10-ve.c b/drivers/clk/sunxi/clk-a10-ve.c
-new file mode 100644
-index 0000000..044c171
 --- /dev/null
 +++ b/drivers/clk/sunxi/clk-a10-ve.c
 @@ -0,0 +1,171 @@

target/linux/sunxi/patches-4.4/111-1-dt-sun4i-add-ve-clock-module.patch

@@ -12,8 +12,6 @@ Signed-off-by: Maxime Ripard <[email protected]>
  arch/arm/boot/dts/sun4i-a10.dtsi | 9 +++++++++
  1 file changed, 9 insertions(+)
 
-diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
-index 849d024..2c8f5e6 100644
 --- a/arch/arm/boot/dts/sun4i-a10.dtsi
 +++ b/arch/arm/boot/dts/sun4i-a10.dtsi
 @@ -520,6 +520,15 @@

target/linux/sunxi/patches-4.4/111-2-dt-sun7i-add-ve-clock-module.patch

@@ -12,8 +12,6 @@ Signed-off-by: Maxime Ripard <[email protected]>
  arch/arm/boot/dts/sun7i-a20.dtsi | 9 +++++++++
  1 file changed, 9 insertions(+)
 
-diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
-index 21169c0..0940a78 100644
 --- a/arch/arm/boot/dts/sun7i-a20.dtsi
 +++ b/arch/arm/boot/dts/sun7i-a20.dtsi
 @@ -527,6 +527,15 @@

target/linux/sunxi/patches-4.4/115-musb-ignore-vbus-errors.patch

@@ -11,11 +11,9 @@ Signed-off-by: Hans de Goede <[email protected]>
  drivers/usb/musb/sunxi.c | 4 ++++
  1 file changed, 4 insertions(+)
 
-diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c
-index d9b0dc4..4b472b8 100644
 --- a/drivers/usb/musb/sunxi.c
 +++ b/drivers/usb/musb/sunxi.c
-@@ -194,6 +194,10 @@ static irqreturn_t sunxi_musb_interrupt(int irq, void *__hci)
+@@ -194,6 +194,10 @@ static irqreturn_t sunxi_musb_interrupt(
  		musb_writeb(musb->mregs, MUSB_FADDR, 0);
  	}
  

target/linux/sunxi/patches-4.4/116-crypto-add-missing-statesize.patch

@@ -17,11 +17,9 @@ Signed-off-by: Herbert Xu <[email protected]>
  drivers/crypto/sunxi-ss/sun4i-ss-core.c | 2 ++
  1 file changed, 2 insertions(+)
 
-diff --git a/drivers/crypto/sunxi-ss/sun4i-ss-core.c b/drivers/crypto/sunxi-ss/sun4i-ss-core.c
-index eab6fe2..107cd2a 100644
 --- a/drivers/crypto/sunxi-ss/sun4i-ss-core.c
 +++ b/drivers/crypto/sunxi-ss/sun4i-ss-core.c
-@@ -39,6 +39,7 @@ static struct sun4i_ss_alg_template ss_algs[] = {
+@@ -39,6 +39,7 @@ static struct sun4i_ss_alg_template ss_a
  		.import = sun4i_hash_import_md5,
  		.halg = {
  			.digestsize = MD5_DIGEST_SIZE,
@@ -29,7 +27,7 @@ index eab6fe2..107cd2a 100644
  			.base = {
  				.cra_name = "md5",
  				.cra_driver_name = "md5-sun4i-ss",
-@@ -66,6 +67,7 @@ static struct sun4i_ss_alg_template ss_algs[] = {
+@@ -66,6 +67,7 @@ static struct sun4i_ss_alg_template ss_a
  		.import = sun4i_hash_import_sha1,
  		.halg = {
  			.digestsize = SHA1_DIGEST_SIZE,

target/linux/sunxi/patches-4.4/130-pinctrl-sunxi-add-h3-pio.patch

@@ -16,8 +16,6 @@ Acked-by: Maxime Ripard <[email protected]>
  4 files changed, 522 insertions(+)
  create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun8i-h3.c
 
-diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
-index b321b26..e6ba602 100644
 --- a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
 +++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
 @@ -18,6 +18,7 @@ Required properties:
@@ -28,8 +26,6 @@ index b321b26..e6ba602 100644
  
  - reg: Should contain the register physical address and length for the
    pin controller.
-diff --git a/drivers/pinctrl/sunxi/Kconfig b/drivers/pinctrl/sunxi/Kconfig
-index e68fd95..89ab7f5 100644
 --- a/drivers/pinctrl/sunxi/Kconfig
 +++ b/drivers/pinctrl/sunxi/Kconfig
 @@ -51,6 +51,10 @@ config PINCTRL_SUN8I_A23_R
@@ -43,19 +39,14 @@ index e68fd95..89ab7f5 100644
  config PINCTRL_SUN9I_A80
  	def_bool MACH_SUN9I
  	select PINCTRL_SUNXI_COMMON
-diff --git a/drivers/pinctrl/sunxi/Makefile b/drivers/pinctrl/sunxi/Makefile
-index e080290..6bd818e 100644
 --- a/drivers/pinctrl/sunxi/Makefile
 +++ b/drivers/pinctrl/sunxi/Makefile
-@@ -13,4 +13,5 @@ obj-$(CONFIG_PINCTRL_SUN8I_A23)		+= pinctrl-sun8i-a23.o
+@@ -13,4 +13,5 @@ obj-$(CONFIG_PINCTRL_SUN8I_A23)		+= pinc
  obj-$(CONFIG_PINCTRL_SUN8I_A23_R)	+= pinctrl-sun8i-a23-r.o
  obj-$(CONFIG_PINCTRL_SUN8I_A33)		+= pinctrl-sun8i-a33.o
  obj-$(CONFIG_PINCTRL_SUN8I_A83T)	+= pinctrl-sun8i-a83t.o
 +obj-$(CONFIG_PINCTRL_SUN8I_H3)		+= pinctrl-sun8i-h3.o
  obj-$(CONFIG_PINCTRL_SUN9I_A80)		+= pinctrl-sun9i-a80.o
-diff --git a/drivers/pinctrl/sunxi/pinctrl-sun8i-h3.c b/drivers/pinctrl/sunxi/pinctrl-sun8i-h3.c
-new file mode 100644
-index 0000000..98d465d
 --- /dev/null
 +++ b/drivers/pinctrl/sunxi/pinctrl-sun8i-h3.c
 @@ -0,0 +1,516 @@

target/linux/sunxi/patches-4.4/131-reset-add-h3-resets.patch

@@ -12,8 +12,6 @@ Signed-off-by: Jens Kuske <[email protected]>
  drivers/reset/reset-sunxi.c                        | 30 +++++++++++++++++++---
  2 files changed, 28 insertions(+), 3 deletions(-)
 
-diff --git a/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt b/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt
-index c8f77571..e11f023 100644
 --- a/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt
 +++ b/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt
 @@ -8,6 +8,7 @@ Required properties:
@@ -24,11 +22,9 @@ index c8f77571..e11f023 100644
  - reg: should be register base and length as documented in the
    datasheet
  - #reset-cells: 1, see below
-diff --git a/drivers/reset/reset-sunxi.c b/drivers/reset/reset-sunxi.c
-index 3d95c87..c91e146 100644
 --- a/drivers/reset/reset-sunxi.c
 +++ b/drivers/reset/reset-sunxi.c
-@@ -75,7 +75,9 @@ static struct reset_control_ops sunxi_reset_ops = {
+@@ -75,7 +75,9 @@ static struct reset_control_ops sunxi_re
  	.deassert	= sunxi_reset_deassert,
  };
  
@@ -39,7 +35,7 @@ index 3d95c87..c91e146 100644
  {
  	struct sunxi_reset_data *data;
  	struct resource res;
-@@ -108,6 +110,7 @@ static int sunxi_reset_init(struct device_node *np)
+@@ -108,6 +110,7 @@ static int sunxi_reset_init(struct devic
  	data->rcdev.nr_resets = size * 32;
  	data->rcdev.ops = &sunxi_reset_ops;
  	data->rcdev.of_node = np;
@@ -47,7 +43,7 @@ index 3d95c87..c91e146 100644
  	reset_controller_register(&data->rcdev);
  
  	return 0;
-@@ -117,6 +120,21 @@ static int sunxi_reset_init(struct device_node *np)
+@@ -117,6 +120,21 @@ err_alloc:
  	return ret;
  };
  
@@ -69,7 +65,7 @@ index 3d95c87..c91e146 100644
  /*
   * These are the reset controller we need to initialize early on in
   * our system, before we can even think of using a regular device
-@@ -124,15 +142,21 @@ static int sunxi_reset_init(struct device_node *np)
+@@ -124,15 +142,21 @@ err_alloc:
   */
  static const struct of_device_id sunxi_early_reset_dt_ids[] __initdata = {
  	{ .compatible = "allwinner,sun6i-a31-ahb1-reset", },
@@ -80,12 +76,13 @@ index 3d95c87..c91e146 100644
  void __init sun6i_reset_init(void)
  {
  	struct device_node *np;
+-
+-	for_each_matching_node(np, sunxi_early_reset_dt_ids)
+-		sunxi_reset_init(np);
 +	const struct of_device_id *match;
 +	int (*of_xlate)(struct reset_controller_dev *rcdev,
 +			const struct of_phandle_args *reset_spec);
- 
--	for_each_matching_node(np, sunxi_early_reset_dt_ids)
--		sunxi_reset_init(np);
++
 +	for_each_matching_node_and_match(np, sunxi_early_reset_dt_ids, &match) {
 +		of_xlate = match->data;
 +		sunxi_reset_init(np, of_xlate);

target/linux/sunxi/patches-4.4/132-dt-sun8i-add-h3-usbclocks.patch

@@ -11,8 +11,6 @@ Signed-off-by: Hans de Goede <[email protected]>
  arch/arm/boot/dts/sun8i-h3.dtsi | 12 ++++++++++++
  1 file changed, 12 insertions(+)
 
-diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
-index 1524130e..cbab947 100644
 --- a/arch/arm/boot/dts/sun8i-h3.dtsi
 +++ b/arch/arm/boot/dts/sun8i-h3.dtsi
 @@ -269,6 +269,18 @@

target/linux/sunxi/patches-4.4/133-dt-sun8i-add-usbphy-usbhost-ctrl-nodes.patch

@@ -11,8 +11,6 @@ Signed-off-by: Hans de Goede <[email protected]>
  arch/arm/boot/dts/sun8i-h3.dtsi | 101 ++++++++++++++++++++++++++++++++++++++++
  1 file changed, 101 insertions(+)
 
-diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
-index cbab947..1169f515 100644
 --- a/arch/arm/boot/dts/sun8i-h3.dtsi
 +++ b/arch/arm/boot/dts/sun8i-h3.dtsi
 @@ -362,6 +362,107 @@

target/linux/sunxi/patches-4.4/134-dt-sun8i-orangepiplus-enable-usbhost.patch

@@ -13,8 +13,6 @@ Signed-off-by: Jens Kuske <[email protected]>
  arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts | 44 ++++++++++++++++++++++++++++
  1 file changed, 44 insertions(+)
 
-diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
-index e67df59..1cb6c66 100644
 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
 +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
 @@ -58,6 +58,35 @@

target/linux/sunxi/patches-4.4/135-clk-sunxi-fix-signedness-bug.patch

@@ -12,11 +12,9 @@ Signed-off-by: Maxime Ripard <[email protected]>
  drivers/clk/sunxi/clk-sun8i-bus-gates.c | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)
 
-diff --git a/drivers/clk/sunxi/clk-sun8i-bus-gates.c b/drivers/clk/sunxi/clk-sun8i-bus-gates.c
-index 7ab60c5..b8c7753 100644
 --- a/drivers/clk/sunxi/clk-sun8i-bus-gates.c
 +++ b/drivers/clk/sunxi/clk-sun8i-bus-gates.c
-@@ -40,7 +40,7 @@ static void __init sun8i_h3_bus_gates_init(struct device_node *node)
+@@ -40,7 +40,7 @@ static void __init sun8i_h3_bus_gates_in
  	const __be32 *p;
  	int number, i;
  	u8 clk_bit;

target/linux/sunxi/patches-4.4/140-reset-add-of_reset_control_get_by_index.patch

@@ -16,11 +16,9 @@ Signed-off-by: Philipp Zabel <[email protected]>
  include/linux/reset.h |  9 +++++++++
  2 files changed, 38 insertions(+), 11 deletions(-)
 
-diff --git a/drivers/reset/core.c b/drivers/reset/core.c
-index 7955e00..81ae17d 100644
 --- a/drivers/reset/core.c
 +++ b/drivers/reset/core.c
-@@ -141,27 +141,24 @@ int reset_control_status(struct reset_control *rstc)
+@@ -141,27 +141,24 @@ int reset_control_status(struct reset_co
  EXPORT_SYMBOL_GPL(reset_control_status);
  
  /**
@@ -56,7 +54,7 @@ index 7955e00..81ae17d 100644
  	ret = of_parse_phandle_with_args(node, "resets", "#reset-cells",
  					 index, &args);
  	if (ret)
-@@ -202,6 +199,27 @@ struct reset_control *of_reset_control_get(struct device_node *node,
+@@ -202,6 +199,27 @@ struct reset_control *of_reset_control_g
  
  	return rstc;
  }
@@ -84,11 +82,9 @@ index 7955e00..81ae17d 100644
  EXPORT_SYMBOL_GPL(of_reset_control_get);
  
  /**
-diff --git a/include/linux/reset.h b/include/linux/reset.h
-index 7f65f9c..6db74ad 100644
 --- a/include/linux/reset.h
 +++ b/include/linux/reset.h
-@@ -38,6 +38,9 @@ static inline struct reset_control *devm_reset_control_get_optional(
+@@ -38,6 +38,9 @@ static inline struct reset_control *devm
  struct reset_control *of_reset_control_get(struct device_node *node,
  					   const char *id);
  
@@ -98,7 +94,7 @@ index 7f65f9c..6db74ad 100644
  #else
  
  static inline int reset_control_reset(struct reset_control *rstc)
-@@ -106,6 +109,12 @@ static inline struct reset_control *of_reset_control_get(
+@@ -106,6 +109,12 @@ static inline struct reset_control *of_r
  	return ERR_PTR(-ENOSYS);
  }
  

target/linux/sunxi/patches-4.4/141-reset-fix-of_reset_control_get.patch

@@ -21,11 +21,9 @@ Signed-off-by: Philipp Zabel <[email protected]>
  drivers/reset/core.c | 5 ++++-
  1 file changed, 4 insertions(+), 1 deletion(-)
 
-diff --git a/drivers/reset/core.c b/drivers/reset/core.c
-index 81ae17d..77cfc49 100644
 --- a/drivers/reset/core.c
 +++ b/drivers/reset/core.c
-@@ -215,9 +215,12 @@ struct reset_control *of_reset_control_get(struct device_node *node,
+@@ -215,9 +215,12 @@ struct reset_control *of_reset_control_g
  {
  	int index = 0;
  

target/linux/sunxi/patches-4.4/142-reset-use-ENOTSUPP-instead-of-ENOSYS.patch

@@ -13,11 +13,9 @@ Signed-off-by: Philipp Zabel <[email protected]>
  include/linux/reset.h | 8 ++++----
  2 files changed, 8 insertions(+), 8 deletions(-)
 
-diff --git a/drivers/reset/core.c b/drivers/reset/core.c
-index 77cfc49..9ab9290 100644
 --- a/drivers/reset/core.c
 +++ b/drivers/reset/core.c
-@@ -95,7 +95,7 @@ int reset_control_reset(struct reset_control *rstc)
+@@ -95,7 +95,7 @@ int reset_control_reset(struct reset_con
  	if (rstc->rcdev->ops->reset)
  		return rstc->rcdev->ops->reset(rstc->rcdev, rstc->id);
  
@@ -26,7 +24,7 @@ index 77cfc49..9ab9290 100644
  }
  EXPORT_SYMBOL_GPL(reset_control_reset);
  
-@@ -108,7 +108,7 @@ int reset_control_assert(struct reset_control *rstc)
+@@ -108,7 +108,7 @@ int reset_control_assert(struct reset_co
  	if (rstc->rcdev->ops->assert)
  		return rstc->rcdev->ops->assert(rstc->rcdev, rstc->id);
  
@@ -35,7 +33,7 @@ index 77cfc49..9ab9290 100644
  }
  EXPORT_SYMBOL_GPL(reset_control_assert);
  
-@@ -121,7 +121,7 @@ int reset_control_deassert(struct reset_control *rstc)
+@@ -121,7 +121,7 @@ int reset_control_deassert(struct reset_
  	if (rstc->rcdev->ops->deassert)
  		return rstc->rcdev->ops->deassert(rstc->rcdev, rstc->id);
  
@@ -44,7 +42,7 @@ index 77cfc49..9ab9290 100644
  }
  EXPORT_SYMBOL_GPL(reset_control_deassert);
  
-@@ -136,7 +136,7 @@ int reset_control_status(struct reset_control *rstc)
+@@ -136,7 +136,7 @@ int reset_control_status(struct reset_co
  	if (rstc->rcdev->ops->status)
  		return rstc->rcdev->ops->status(rstc->rcdev, rstc->id);
  
@@ -53,11 +51,9 @@ index 77cfc49..9ab9290 100644
  }
  EXPORT_SYMBOL_GPL(reset_control_status);
  
-diff --git a/include/linux/reset.h b/include/linux/reset.h
-index 6db74ad..c4c097d 100644
 --- a/include/linux/reset.h
 +++ b/include/linux/reset.h
-@@ -74,7 +74,7 @@ static inline void reset_control_put(struct reset_control *rstc)
+@@ -74,7 +74,7 @@ static inline void reset_control_put(str
  
  static inline int device_reset_optional(struct device *dev)
  {
@@ -66,7 +62,7 @@ index 6db74ad..c4c097d 100644
  }
  
  static inline struct reset_control *__must_check reset_control_get(
-@@ -94,19 +94,19 @@ static inline struct reset_control *__must_check devm_reset_control_get(
+@@ -94,19 +94,19 @@ static inline struct reset_control *__mu
  static inline struct reset_control *reset_control_get_optional(
  					struct device *dev, const char *id)
  {

target/linux/sunxi/patches-4.4/143-reset-add-shared-resetcontrol-asserts.patch

@@ -22,11 +22,9 @@ Changes in v2:
  include/linux/reset.h            |   2 +
  3 files changed, 116 insertions(+), 9 deletions(-)
 
-diff --git a/drivers/reset/core.c b/drivers/reset/core.c
-index 9ab9290..8c3436c 100644
 --- a/drivers/reset/core.c
 +++ b/drivers/reset/core.c
-@@ -22,16 +22,29 @@ static DEFINE_MUTEX(reset_controller_list_mutex);
+@@ -22,16 +22,29 @@ static DEFINE_MUTEX(reset_controller_lis
  static LIST_HEAD(reset_controller_list);
  
  /**
@@ -59,7 +57,7 @@ index 9ab9290..8c3436c 100644
  };
  
  /**
-@@ -66,6 +79,8 @@ int reset_controller_register(struct reset_controller_dev *rcdev)
+@@ -66,6 +79,8 @@ int reset_controller_register(struct res
  		rcdev->of_xlate = of_reset_simple_xlate;
  	}
  
@@ -68,7 +66,7 @@ index 9ab9290..8c3436c 100644
  	mutex_lock(&reset_controller_list_mutex);
  	list_add(&rcdev->list, &reset_controller_list);
  	mutex_unlock(&reset_controller_list_mutex);
-@@ -93,7 +108,7 @@ EXPORT_SYMBOL_GPL(reset_controller_unregister);
+@@ -93,7 +108,7 @@ EXPORT_SYMBOL_GPL(reset_controller_unreg
  int reset_control_reset(struct reset_control *rstc)
  {
  	if (rstc->rcdev->ops->reset)
@@ -143,7 +141,7 @@ index 9ab9290..8c3436c 100644
   * reset_control_status - returns a negative errno if not supported, a
   * positive value if the reset line is asserted, or zero if the reset
   * line is not asserted.
-@@ -134,12 +191,47 @@ EXPORT_SYMBOL_GPL(reset_control_deassert);
+@@ -134,12 +191,47 @@ EXPORT_SYMBOL_GPL(reset_control_deassert
  int reset_control_status(struct reset_control *rstc)
  {
  	if (rstc->rcdev->ops->status)
@@ -192,7 +190,7 @@ index 9ab9290..8c3436c 100644
  /**
   * of_reset_control_get_by_index - Lookup and obtain a reference to a reset
   * controller by index.
-@@ -155,6 +247,7 @@ struct reset_control *of_reset_control_get_by_index(struct device_node *node,
+@@ -155,6 +247,7 @@ struct reset_control *of_reset_control_g
  {
  	struct reset_control *rstc = ERR_PTR(-EPROBE_DEFER);
  	struct reset_controller_dev *r, *rcdev;
@@ -200,7 +198,7 @@ index 9ab9290..8c3436c 100644
  	struct of_phandle_args args;
  	int rstc_id;
  	int ret;
-@@ -186,16 +279,22 @@ struct reset_control *of_reset_control_get_by_index(struct device_node *node,
+@@ -186,16 +279,22 @@ struct reset_control *of_reset_control_g
  	}
  
  	try_module_get(rcdev->owner);
@@ -225,7 +223,7 @@ index 9ab9290..8c3436c 100644
  
  	return rstc;
  }
-@@ -259,6 +358,10 @@ void reset_control_put(struct reset_control *rstc)
+@@ -259,6 +358,10 @@ void reset_control_put(struct reset_cont
  	if (IS_ERR(rstc))
  		return;
  
@@ -236,8 +234,6 @@ index 9ab9290..8c3436c 100644
  	module_put(rstc->rcdev->owner);
  	kfree(rstc);
  }
-diff --git a/include/linux/reset-controller.h b/include/linux/reset-controller.h
-index ce6b962..7f2cbd1 100644
 --- a/include/linux/reset-controller.h
 +++ b/include/linux/reset-controller.h
 @@ -31,6 +31,7 @@ struct of_phandle_args;
@@ -256,11 +252,9 @@ index ce6b962..7f2cbd1 100644
  	struct device_node *of_node;
  	int of_reset_n_cells;
  	int (*of_xlate)(struct reset_controller_dev *rcdev,
-diff --git a/include/linux/reset.h b/include/linux/reset.h
-index c4c097d..1cca8ce 100644
 --- a/include/linux/reset.h
 +++ b/include/linux/reset.h
-@@ -11,6 +11,8 @@ int reset_control_reset(struct reset_control *rstc);
+@@ -11,6 +11,8 @@ int reset_control_reset(struct reset_con
  int reset_control_assert(struct reset_control *rstc);
  int reset_control_deassert(struct reset_control *rstc);
  int reset_control_status(struct reset_control *rstc);

target/linux/sunxi/patches-4.4/144-usb-ehci-plat-support-multiple-reset-ctrllines.patch

@@ -19,8 +19,6 @@ Changes in v2:
  drivers/usb/host/ehci-platform.c                   | 47 +++++++++++++---------
  2 files changed, 30 insertions(+), 19 deletions(-)
 
-diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt
-index a12d601..0701812 100644
 --- a/Documentation/devicetree/bindings/usb/usb-ehci.txt
 +++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt
 @@ -18,7 +18,7 @@ Optional properties:
@@ -32,8 +30,6 @@ index a12d601..0701812 100644
  
  Example (Sequoia 440EPx):
      ehci@e0000300 {
-diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
-index bd7082f2..6fbf32a 100644
 --- a/drivers/usb/host/ehci-platform.c
 +++ b/drivers/usb/host/ehci-platform.c
 @@ -39,11 +39,12 @@
@@ -50,7 +46,7 @@ index bd7082f2..6fbf32a 100644
  	struct phy **phys;
  	int num_phys;
  	bool reset_on_resume;
-@@ -149,7 +150,7 @@ static int ehci_platform_probe(struct platform_device *dev)
+@@ -149,7 +150,7 @@ static int ehci_platform_probe(struct pl
  	struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev);
  	struct ehci_platform_priv *priv;
  	struct ehci_hcd *ehci;
@@ -59,7 +55,7 @@ index bd7082f2..6fbf32a 100644
  
  	if (usb_disabled())
  		return -ENODEV;
-@@ -232,18 +233,24 @@ static int ehci_platform_probe(struct platform_device *dev)
+@@ -232,18 +233,24 @@ static int ehci_platform_probe(struct pl
  				break;
  			}
  		}
@@ -95,7 +91,7 @@ index bd7082f2..6fbf32a 100644
  	}
  
  	if (pdata->big_endian_desc)
-@@ -300,8 +307,10 @@ static int ehci_platform_probe(struct platform_device *dev)
+@@ -302,8 +309,10 @@ err_power:
  	if (pdata->power_off)
  		pdata->power_off(dev);
  err_reset:
@@ -108,7 +104,7 @@ index bd7082f2..6fbf32a 100644
  err_put_clks:
  	while (--clk >= 0)
  		clk_put(priv->clks[clk]);
-@@ -319,15 +328,17 @@ static int ehci_platform_remove(struct platform_device *dev)
+@@ -321,15 +330,17 @@ static int ehci_platform_remove(struct p
  	struct usb_hcd *hcd = platform_get_drvdata(dev);
  	struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev);
  	struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);

target/linux/sunxi/patches-4.4/145-usb-ohci-plat-support-multiple-reset-ctrllines.patch

@@ -19,8 +19,6 @@ Changes in v2:
  drivers/usb/host/ohci-platform.c                   | 49 +++++++++++++---------
  2 files changed, 30 insertions(+), 21 deletions(-)
 
-diff --git a/Documentation/devicetree/bindings/usb/usb-ohci.txt b/Documentation/devicetree/bindings/usb/usb-ohci.txt
-index 19233b7..9df4569 100644
 --- a/Documentation/devicetree/bindings/usb/usb-ohci.txt
 +++ b/Documentation/devicetree/bindings/usb/usb-ohci.txt
 @@ -14,7 +14,7 @@ Optional properties:
@@ -32,8 +30,6 @@ index 19233b7..9df4569 100644
  
  Example:
  
-diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
-index c2669f18..7d8bbc4 100644
 --- a/drivers/usb/host/ohci-platform.c
 +++ b/drivers/usb/host/ohci-platform.c
 @@ -33,11 +33,12 @@
@@ -50,7 +46,7 @@ index c2669f18..7d8bbc4 100644
  	struct phy **phys;
  	int num_phys;
  };
-@@ -117,7 +118,7 @@ static int ohci_platform_probe(struct platform_device *dev)
+@@ -117,7 +118,7 @@ static int ohci_platform_probe(struct pl
  	struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev);
  	struct ohci_platform_priv *priv;
  	struct ohci_hcd *ohci;
@@ -59,7 +55,7 @@ index c2669f18..7d8bbc4 100644
  
  	if (usb_disabled())
  		return -ENODEV;
-@@ -195,19 +196,23 @@ static int ohci_platform_probe(struct platform_device *dev)
+@@ -195,19 +196,23 @@ static int ohci_platform_probe(struct pl
  				break;
  			}
  		}
@@ -96,7 +92,7 @@ index c2669f18..7d8bbc4 100644
  	}
  
  	if (pdata->big_endian_desc)
-@@ -265,8 +270,10 @@ static int ohci_platform_probe(struct platform_device *dev)
+@@ -265,8 +270,10 @@ err_power:
  	if (pdata->power_off)
  		pdata->power_off(dev);
  err_reset:
@@ -109,7 +105,7 @@ index c2669f18..7d8bbc4 100644
  err_put_clks:
  	while (--clk >= 0)
  		clk_put(priv->clks[clk]);
-@@ -284,15 +291,17 @@ static int ohci_platform_remove(struct platform_device *dev)
+@@ -284,15 +291,17 @@ static int ohci_platform_remove(struct p
  	struct usb_hcd *hcd = platform_get_drvdata(dev);
  	struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev);
  	struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);

target/linux/sunxi/patches-4.4/150-dt-sun7i-enable-codec-on-pcduino3.patch

@@ -11,8 +11,6 @@ Signed-off-by: Hans de Goede <[email protected]>
  arch/arm/boot/dts/sun7i-a20-pcduino3.dts | 5 +++++
  1 file changed, 5 insertions(+)
 
-diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
-index 861a4a6..067f365 100644
 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
 +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
 @@ -111,6 +111,11 @@

target/linux/sunxi/patches-4.4/200-dt-sun7i-add-lamobo-r1.patch

@@ -18,11 +18,9 @@ Signed-off-by: Hans de Goede <[email protected]>
  2 files changed, 298 insertions(+)
  create mode 100644 arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
 
-diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
-index cc7309b..6f8deac 100644
 --- a/arch/arm/boot/dts/Makefile
 +++ b/arch/arm/boot/dts/Makefile
-@@ -639,6 +639,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
+@@ -638,6 +638,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
  	sun7i-a20-cubietruck.dtb \
  	sun7i-a20-hummingbird.dtb \
  	sun7i-a20-i12-tvbox.dtb \
@@ -30,9 +28,6 @@ index cc7309b..6f8deac 100644
  	sun7i-a20-m3.dtb \
  	sun7i-a20-mk808c.dtb \
  	sun7i-a20-olimex-som-evb.dtb \
-diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
-new file mode 100644
-index 0000000..975b0b2
 --- /dev/null
 +++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
 @@ -0,0 +1,297 @@

target/linux/x86/patches-4.4/011-tune_lzma_options.patch

@@ -1,6 +1,6 @@
 --- a/scripts/Makefile.lib
 +++ b/scripts/Makefile.lib
-@@ -324,7 +324,7 @@
+@@ -324,7 +324,7 @@ cmd_bzip2 = (cat $(filter-out FORCE,$^)
  
  quiet_cmd_lzma = LZMA    $@
  cmd_lzma = (cat $(filter-out FORCE,$^) | \

target/linux/x86/patches-4.4/120-panic_on_unrecovered_nmi.patch

@@ -1,6 +1,6 @@
 --- a/drivers/mfd/rdc321x-southbridge.c
 +++ b/drivers/mfd/rdc321x-southbridge.c
-@@ -85,6 +85,8 @@
+@@ -85,6 +85,8 @@ static int rdc321x_sb_probe(struct pci_d
  	rdc321x_gpio_pdata.sb_pdev = pdev;
  	rdc321x_wdt_pdata.sb_pdev = pdev;