mac80211: restructure /lib/wifi/mac80211.sh use the new multi-bss single instance hostapd mode move mac80211 specific bits out of /lib/wifi/hostapd.sh add a new option 'htmode' for switching between HT20 and HT40+,HT40-

SVN-Revision: 19235

package/hostapd/files/hostapd.sh

@@ -1,7 +1,10 @@
-hostapd_setup_vif() {
-	local vif="$1"
-	local driver="$2"
-	local hostapd_cfg=
+hostapd_set_bss_options() {
+	local var="$1"
+	local vif="$2"
+	local enc wpa_group_rekey
+
+	config_get enc "$vif" encryption
+	config_get wpa_group_rekey "$vif" wpa_group_rekey
 
 	# Examples:
 	# psk-mixed/tkip 	=> WPA1+2 PSK, TKIP
@@ -14,7 +17,7 @@ hostapd_setup_vif() {
 
 	# crypto defaults: WPA2 vs WPA1
 	case "$enc" in
-		wpa2*|WPA2*|*PSK2*|*psk2*)
+		wpa2*|*psk2*)
 			wpa=2
 			crypto="CCMP"
 		;;
@@ -30,137 +33,82 @@ hostapd_setup_vif() {
 
 	# explicit override for crypto setting
 	case "$enc" in
-		*tkip+aes|*TKIP+AES|*tkip+ccmp|*TKIP+CCMP) crypto="CCMP TKIP";;
-		*tkip|*TKIP) crypto="TKIP";;
-		*aes|*AES|*ccmp|*CCMP) crypto="CCMP";;
+		*tkip+aes|*tkip+ccmp) crypto="CCMP TKIP";;
+		*aes|*ccmp) crypto="CCMP";;
+		*tkip) crypto="TKIP";;
 	esac
 
 	# use crypto/auth settings for building the hostapd config
 	case "$enc" in
-		*psk*|*PSK*)
+		*psk*)
 			config_get psk "$vif" key
 			if [ ${#psk} -eq 64 ]; then
-				append hostapd_cfg "wpa_psk=$psk" "$N"
+				append "$var" "wpa_psk=$psk" "$N"
 			else
-				append hostapd_cfg "wpa_passphrase=$psk" "$N"
+				append "$var" "wpa_passphrase=$psk" "$N"
 			fi
 		;;
-		*wpa*|*WPA*)
+		*wpa*)
 			# required fields? formats?
 			# hostapd is particular, maybe a default configuration for failures
 			config_get server "$vif" server
-			append hostapd_cfg "auth_server_addr=$server" "$N"
+			append "$var" "auth_server_addr=$server" "$N"
 			config_get port "$vif" port
 			port=${port:-1812}
-			append hostapd_cfg "auth_server_port=$port" "$N"
+			append "$var" "auth_server_port=$port" "$N"
 			config_get secret "$vif" key
-			append hostapd_cfg "auth_server_shared_secret=$secret" "$N"
+			append "$var" "auth_server_shared_secret=$secret" "$N"
 			config_get nasid "$vif" nasid
-			append hostapd_cfg "nas_identifier=$nasid" "$N"
-			append hostapd_cfg "eapol_key_index_workaround=1" "$N"
-			append hostapd_cfg "radius_acct_interim_interval=300" "$N"
-			append hostapd_cfg "ieee8021x=1" "$N"
-			append hostapd_cfg "auth_algs=1" "$N"
-			append hostapd_cfg "wpa_key_mgmt=WPA-EAP" "$N"
-			append hostapd_cfg "wpa_group_rekey=300" "$N"
-			append hostapd_cfg "wpa_gmk_rekey=640" "$N"
+			append "$var" "nas_identifier=$nasid" "$N"
+			append "$var" "eapol_key_index_workaround=1" "$N"
+			append "$var" "radius_acct_interim_interval=300" "$N"
+			append "$var" "ieee8021x=1" "$N"
+			append "$var" "auth_algs=1" "$N"
+			append "$var" "wpa_key_mgmt=WPA-EAP" "$N"
+			append "$var" "wpa_group_rekey=300" "$N"
+			append "$var" "wpa_gmk_rekey=640" "$N"
 		;;
 		*)
 			wpa=0
 			crypto=
 		;;
 	esac
-	config_get ifname "$vif" ifname
-	config_get bridge "$vif" bridge
+	append "$var" "wpa=$wpa" "$N"
+	[ -n "$crypto" ] && append "$var" "wpa_pairwise=$crypto" "$N"
+	[ -n "$wpa_group_rekey" ] && append "$var" "wpa_group_rekey=$wpa_group_rekey" "$N"
+
 	config_get ssid "$vif" ssid
+	config_get bridge "$vif" bridge
+	config_get ieee80211d "$vif" ieee80211d
+
+	append "$var" "ssid=$ssid" "$N"
+	[ -n "$bridge" ] && append "$var" "bridge=$bridge" "$N"
+	[ -n "$ieee80211d" ] && append "$var" "ieee80211d=$ieee80211d" "$N"
+}
+
+hostapd_setup_vif() {
+	local vif="$1"
+	local driver="$2"
+	hostapd_cfg=
+
+	hostapd_set_bss_options hostapd_cfg "$vif"
+	config_get ifname "$vif" ifname
 	config_get device "$vif" device
 	config_get channel "$device" channel
 	config_get hwmode "$device" hwmode
-	config_get wpa_group_rekey "$vif" wpa_group_rekey
-	config_get ieee80211d "$vif" ieee80211d
-	config_get_bool hidden "$vif" hidden 0
-	config_get_bool wds "$vif" wds 0
-	[ "$wds" -gt 0 -a "$driver" = "nl80211" ] && wds="wds_sta=1" || wds=""
 	case "$hwmode" in
 		bg) hwmode=g;;
 	esac
-	config_get country "$device" country
 	[ "$channel" = auto ] && channel=
 	[ -n "$channel" -a -z "$hwmode" ] && wifi_fixup_hwmode "$device"
-	[ -n "$hwmode" ] && {
-		config_get hwmode_11n "$device" hwmode_11n
-		[ -n "$hwmode_11n" ] && {
-			hwmode="$hwmode_11n"
-			config_get ht_capab "$device" ht_capab
-			[ -n "$ht_capab" -a -n "${ht_capab%%\[*}" ] && {
-				ht_capab=`echo "[$ht_capab]" | sed -e 's, ,][,g'`
-			}
-		}
-	}
 	cat > /var/run/hostapd-$ifname.conf <<EOF
 ctrl_interface=/var/run/hostapd-$ifname
 driver=$driver
 interface=$ifname
 ${hwmode:+hw_mode=$hwmode}
 ${channel:+channel=$channel}
-${bridge:+bridge=$bridge}
-ssid=$ssid
-wpa=$wpa
-${crypto:+wpa_pairwise=$crypto}
-${country:+country_code=$country}
-${hwmode_11n:+ieee80211n=1}
-${ht_capab:+ht_capab=$ht_capab}
-${wpa_group_rekey:+wpa_group_rekey=$wpa_group_rekey}
-${ieee80211d:+ieee80211d=$ieee80211d}
-$wds
 $hostapd_cfg
 EOF
-	case "$driver" in
-		madwifi)
-		;;
-		*) 
-			cat >> /var/run/hostapd-$ifname.conf <<EOF
-ignore_broadcast_ssid=$hidden
-wmm_enabled=1
-wmm_ac_bk_cwmin=4
-wmm_ac_bk_cwmax=10
-wmm_ac_bk_aifs=7
-wmm_ac_bk_txop_limit=0
-wmm_ac_bk_acm=0
-wmm_ac_be_aifs=3
-wmm_ac_be_cwmin=4
-wmm_ac_be_cwmax=10
-wmm_ac_be_txop_limit=0
-wmm_ac_be_acm=0
-wmm_ac_vi_aifs=2
-wmm_ac_vi_cwmin=3
-wmm_ac_vi_cwmax=4
-wmm_ac_vi_txop_limit=94
-wmm_ac_vi_acm=0
-wmm_ac_vo_aifs=2
-wmm_ac_vo_cwmin=2
-wmm_ac_vo_cwmax=3
-wmm_ac_vo_txop_limit=47
-wmm_ac_vo_acm=0
-tx_queue_data3_aifs=7
-tx_queue_data3_cwmin=15
-tx_queue_data3_cwmax=1023
-tx_queue_data3_burst=0
-tx_queue_data2_aifs=3
-tx_queue_data2_cwmin=15
-tx_queue_data2_cwmax=63
-tx_queue_data2_burst=0
-tx_queue_data1_aifs=1
-tx_queue_data1_cwmin=7
-tx_queue_data1_cwmax=15
-tx_queue_data1_burst=3.0
-tx_queue_data0_aifs=1
-tx_queue_data0_cwmin=3
-tx_queue_data0_cwmax=7
-tx_queue_data0_burst=1.5
-EOF
-		;;
-	esac
 	hostapd -P /var/run/wifi-$ifname.pid -B /var/run/hostapd-$ifname.conf
 }
 

package/mac80211/files/lib/wifi/mac80211.sh

@@ -1,8 +1,129 @@
 #!/bin/sh
 append DRIVERS "mac80211"
 
+mac80211_hostapd_setup_base() {
+	local phy="$1"
+	local ifname="$2"
+
+	cfgfile="/var/run/hostapd-$phy.conf"
+	config_get device "$vif" device
+	config_get country "$device" country
+	config_get hwmode "$device" hwmode
+	config_get channel "$device" channel
+	[ -n "$channel" -a -z "$hwmode" ] && wifi_fixup_hwmode "$device"
+	[ "$channel" = auto ] && channel=
+	[ -n "$hwmode" ] && {
+		config_get hwmode_11n "$device" hwmode_11n
+		[ -n "$hwmode_11n" ] && {
+			hwmode="$hwmode_11n"
+			append base_cfg "ieee80211n=1" "$N"
+			config_get htmode "$device" htmode
+			config_get ht_capab_list "$device" ht_capab
+			case "$htmode" in
+				HT20|HT40+|HT40-) ht_capab="[$htmode]";;
+				*)ht_capab=;;
+			esac
+			for cap in $ht_capab_list; do
+				ht_capab="$ht_capab[$cap]"
+			done
+			[ -n "$ht_capab" ] && append base_cfg "ht_capab=$ht_capab" "$N"
+		}
+	}
+	cat > "$cfgfile" <<EOF
+ctrl_interface=/var/run/hostapd-$phy
+driver=nl80211
+wmm_enabled=1
+wmm_ac_bk_cwmin=4
+wmm_ac_bk_cwmax=10
+wmm_ac_bk_aifs=7
+wmm_ac_bk_txop_limit=0
+wmm_ac_bk_acm=0
+wmm_ac_be_aifs=3
+wmm_ac_be_cwmin=4
+wmm_ac_be_cwmax=10
+wmm_ac_be_txop_limit=0
+wmm_ac_be_acm=0
+wmm_ac_vi_aifs=2
+wmm_ac_vi_cwmin=3
+wmm_ac_vi_cwmax=4
+wmm_ac_vi_txop_limit=94
+wmm_ac_vi_acm=0
+wmm_ac_vo_aifs=2
+wmm_ac_vo_cwmin=2
+wmm_ac_vo_cwmax=3
+wmm_ac_vo_txop_limit=47
+wmm_ac_vo_acm=0
+tx_queue_data3_aifs=7
+tx_queue_data3_cwmin=15
+tx_queue_data3_cwmax=1023
+tx_queue_data3_burst=0
+tx_queue_data2_aifs=3
+tx_queue_data2_cwmin=15
+tx_queue_data2_cwmax=63
+tx_queue_data2_burst=0
+tx_queue_data1_aifs=1
+tx_queue_data1_cwmin=7
+tx_queue_data1_cwmax=15
+tx_queue_data1_burst=3.0
+tx_queue_data0_aifs=1
+tx_queue_data0_cwmin=3
+tx_queue_data0_cwmax=7
+tx_queue_data0_burst=1.5
+${hwmode:+hw_mode=$hwmode}
+${channel:+channel=$channel}
+${country:+country_code=$country}
+$base_cfg
+
+EOF
+}
+
+mac80211_hostapd_setup_bss() {
+	local phy="$1"
+	local vif="$2"
+
+	hostapd_cfg=
+	cfgfile="/var/run/hostapd-$phy.conf"
+	config_get ifname "$vif" ifname
+
+	if [ -f "$cfgfile" ]; then
+		append hostapd_cfg "bss=$ifname" "$N"
+	else
+		mac80211_hostapd_setup_base "$phy" "$ifname"
+		append hostapd_cfg "interface=$ifname" "$N"
+	fi
+
+	local net_cfg bridge
+	net_cfg="$(find_net_config "$vif")"
+	[ -z "$net_cfg" ] || bridge="$(bridge_interface "$net_cfg")"
+	config_set "$vif" bridge "$bridge"
+
+	hostapd_set_bss_options hostapd_cfg "$vif"
+
+	config_get_bool wds "$vif" wds 0
+	[ "$wds" -gt 0 ] && append hostapd_cfg "wds_sta=1" "$N"
+
+	config_get macaddr "$vif" macaddr
+	config_get_bool hidden "$vif" hidden 0
+	cat >> /var/run/hostapd-$phy.conf <<EOF
+$hostapd_cfg
+bssid=$macaddr
+ignore_broadcast_ssid=$hidden
+EOF
+}
+
+mac80211_start_vif() {
+	local vif="$1"
+	local ifname="$2"
+
+	local net_cfg
+	net_cfg="$(find_net_config "$vif")"
+	[ -z "$net_cfg" ] || start_net "$ifname" "$net_cfg"
+
+	set_wifi_up "$vif" "$ifname"
+}
+
 find_mac80211_phy() {
-	config_get device "$1"
+	local device="$1"
 
 	local macaddr="$(config_get "$device" macaddr | tr 'A-Z' 'a-z')"
 	config_get phy "$device" phy
@@ -53,7 +174,7 @@ disable_mac80211() (
 	# kill all running hostapd and wpa_supplicant processes that
 	# are running on atheros/mac80211 vifs
 	for pid in `pidof hostapd wpa_supplicant`; do
-		grep wlan /proc/$pid/cmdline >/dev/null && \
+		grep "$phy" /proc/$pid/cmdline >/dev/null && \
 			kill $pid
 	done
 
@@ -82,6 +203,7 @@ enable_mac80211() {
 	config_get phy "$device" phy
 	local i=0
 	local macidx=0
+	local apidx=0
 	fixed=""
 
 	[ -n "$country" ] && iw reg set "$country"
@@ -110,7 +232,6 @@ enable_mac80211() {
 		config_get enc "$vif" encryption
 		config_get mode "$vif" mode
 		config_get ssid "$vif" ssid
-		config_get_bool wds "$vif" wds 0
 
 		# It is far easier to delete and create the desired interface
 		case "$mode" in
@@ -120,7 +241,8 @@ enable_mac80211() {
 			ap)
 				# Hostapd will handle recreating the interface and
 				# it's accompanying monitor
-				iw phy "$phy" interface add "$ifname" type managed
+				apidx="$(($apidx + 1))"
+				[ "$apidx" -gt 1 ] || iw phy "$phy" interface add "$ifname" type managed
 			;;
 			mesh)
 				config_get mesh_id "$vif" mesh_id
@@ -131,6 +253,7 @@ enable_mac80211() {
 			;;
 			sta)
 				local wdsflag
+				config_get_bool wds "$vif" wds 0
 				[ "$wds" -gt 0 ] && wdsflag="4addr on"
 				iw phy "$phy" interface add "$ifname" type managed $wdsflag
 				config_get_bool powersave "$vif" powersave 0
@@ -156,13 +279,8 @@ enable_mac80211() {
 			vif_mac="$( printf %02x $((0x$mac_1 + $offset)) ):$mac_2"
 			macidx="$(($macidx + 1))"
 		}
-		ifconfig "$ifname" hw ether "$vif_mac"
-
-		# We attempt to set teh channel for all interfaces, although
-		# mac80211 may not support it or the driver might not yet
-		[ -n "$fixed" -a -n "$channel" ] && iw dev "$ifname" set channel "$channel"
-
-		local key keystring
+		[ "$mode" = "ap" ] || ifconfig "$ifname" hw ether "$vif_mac"
+		config_set "$vif" macaddr "$vif_mac"
 
 		# Valid values are:
 		# wpa / wep / none
@@ -180,6 +298,13 @@ enable_mac80211() {
 		# wep + keymgmt = 'NONE' -> wpa_supplicant will be
 		# configured to handle the wep connection
 		if [ ! "$mode" = "ap" ]; then
+			# We attempt to set the channel for all interfaces, although
+			# mac80211 may not support it or the driver might not yet
+			# for ap mode this is handled by hostapd
+			[ -n "$fixed" -a -n "$channel" ] && iw dev "$ifname" set channel "$channel"
+
+			local key keystring
+
 			case "$enc" in
 				*wep*)
 					config_get keymgmt "$vif" keymgmt
@@ -229,26 +354,9 @@ enable_mac80211() {
 
 		ifconfig "$ifname" up
 
-		local net_cfg bridge
-		net_cfg="$(find_net_config "$vif")"
-		[ -z "$net_cfg" ] || {
-			bridge="$(bridge_interface "$net_cfg")"
-			config_set "$vif" bridge "$bridge"
-			start_net "$ifname" "$net_cfg"
-		}
+		[ "$mode" = "ap" ] || mac80211_start_vif "$vif" "$ifname"
 
-		set_wifi_up "$vif" "$ifname"
 		case "$mode" in
-			ap)
-				if eval "type hostapd_setup_vif" 2>/dev/null >/dev/null; then
-					hostapd_setup_vif "$vif" nl80211 || {
-						echo "enable_mac80211($device): Failed to set up wpa for interface $ifname" >&2
-						# make sure this wifi interface won't accidentally stay open without encryption
-						ifconfig "$ifname" down
-						continue
-					}
-				fi
-			;;
 			adhoc)
 				config_get bssid "$vif" bssid
 				iw dev "$ifname" ibss join "$ssid" $freq ${fixed:+fixed-freq} $bssid
@@ -290,6 +398,30 @@ enable_mac80211() {
 			;;
 		esac
 	done
+
+	local start_hostapd=
+	rm -f /var/run/hostapd-$phy.conf
+	for vif in $vifs; do
+		config_get mode "$vif" mode
+		[ "$mode" = "ap" ] || continue
+		mac80211_hostapd_setup_bss "$phy" "$vif"
+		start_hostapd=1
+	done
+
+	[ -n "$start_hostapd" ] || return
+
+	hostapd -P /var/run/wifi-$phy.pid -B /var/run/hostapd-$phy.conf || {
+		echo "Failed to start hostapd for $phy"
+		return
+	}
+	sleep 2
+
+	for vif in $vifs; do
+		config_get mode "$vif" mode
+		config_get ifname "$vif" ifname
+		[ "$mode" = "ap" ] || continue
+		mac80211_start_vif "$vif" "$ifname"
+	done
 }
 
 
@@ -325,9 +457,10 @@ detect_mac80211() {
 		ht_capab="";
 		[ "$ht_cap" -gt 0 ] && {
 			mode_11n="n"
+			append ht_capab "	option htmode	HT20" "$N"
+
 			list="	list ht_capab"
 			[ "$(($ht_cap & 1))" -eq 1 ] && append ht_capab "$list	LDPC" "$N"
-			[ "$(($ht_cap & 2))" -eq 2 ] && append ht_capab "$list	HT40-" "$N"
 			[ "$(($ht_cap & 32))" -eq 32 ] && append ht_capab "$list	SHORT-GI-20" "$N"
 			[ "$(($ht_cap & 64))" -eq 64 ] && append ht_capab "$list	SHORT-GI-40" "$N"
 			[ "$(($ht_cap & 4096))" -eq 4096 ] && append ht_capab "$list	DSSS_CCK-40" "$N"
@@ -340,9 +473,9 @@ config wifi-device  radio$devidx
 	option channel  ${channel}
 	option macaddr	$(cat /sys/class/ieee80211/${dev}/macaddress)
 	option hwmode	11${mode_11n}${mode_band}
+$ht_capab
 	# REMOVE THIS LINE TO ENABLE WIFI:
 	option disabled 1
-$ht_capab
 
 config wifi-iface
 	option device   radio$devidx